{"title":"I\/O Modules","description":"\u003ch2\u003eI\/O modules: connecting controls, sensors and circuits to digital switching\u003c\/h2\u003e\n\u003cp\u003eAn I\/O module interfaces between the boat’s control system and physical signals: buttons, sensors, measurements, control outputs or circuits to be driven. It centralizes electrical functions, allows supervision over a communication bus and automates certain actions.\u003c\/p\u003e\n\n\u003ch3\u003eInputs, outputs and signals\u003c\/h3\u003e\n\u003cp\u003eTo acquire commands or logical states, the \u003ca href=\"\/en-ae\/products\/mastervolt-digital-input-masterbus-4-canaux\"\u003eMasterBus Digital Input\u003c\/a\u003e adds input channels to the MasterBus network. On the CZone side, the \u003ca href=\"\/en-ae\/products\/czone-si-interface-signal-module-nmea2000\"\u003eSignal Interface SI\u003c\/a\u003e handles input signals, while the \u003ca href=\"\/en-ae\/products\/czone-oi-interface-sortie-numerique-nmea2000\"\u003eOutput Interface OI\u003c\/a\u003e and the \u003ca href=\"\/en-ae\/products\/czone-interface-coi-combination-out-connecteurs-nmea2000\"\u003eCombined Output Interface COI\u003c\/a\u003e drive outputs within an NMEA 2000\/CZone architecture.\u003c\/p\u003e\n\n\u003ch3\u003eCommunication bridges and controls\u003c\/h3\u003e\n\u003cp\u003eSome modules link two ecosystems or translate commands. The \u003ca href=\"\/en-ae\/products\/czone-module-interface-pont-masterbus\"\u003eMasterBus bridge interface module\u003c\/a\u003e connects CZone and MasterBus. The \u003ca href=\"\/en-ae\/products\/czone-sci-interface-controle-commutateur-nmea2000\"\u003eSwitch Control Interface SCI\u003c\/a\u003e integrates physical controls, while the \u003ca href=\"\/en-ae\/products\/garmin-boat-switch-010-02735-00\"\u003eGarmin Boat Switch\u003c\/a\u003e provides digital switching logic for common onboard circuits.\u003c\/p\u003e\n\n\u003ch3\u003eMeasurement and supervision\u003c\/h3\u003e\n\u003cp\u003eMeasurement modules provide the system with usable data for display, alarms or control logic. The \u003ca href=\"\/en-ae\/products\/bep-ac-vsen-4-transducteur-tension-ac-czone\"\u003eAC voltage transducer for Digital \u0026 CZone\u003c\/a\u003e reports AC voltage measurements, and the \u003ca href=\"\/en-ae\/products\/czone-mi-interface-compteur-nmea2000\"\u003eMeter Interface MI\u003c\/a\u003e handles counting and measurement functions according to the installed architecture.\u003c\/p\u003e\n\n\u003ch3\u003eSelection criteria\u003c\/h3\u003e\n\u003cp\u003eCheck the bus used, the number of channels, signal type, connectors, onboard voltage, installation environment and desired supervision logic. To complete the architecture, see the \u003ca href=\"\/en-ae\/collections\/data-switching\"\u003edata switching\u003c\/a\u003e, \u003ca href=\"\/en-ae\/collections\/c-zone\"\u003eC-Zone\u003c\/a\u003e, \u003ca href=\"\/en-ae\/collections\/electricite\"\u003eelectricity\u003c\/a\u003e, \u003ca href=\"\/en-ae\/collections\/cablage-electricite\"\u003eelectrical wiring\u003c\/a\u003e and \u003ca href=\"\/en-ae\/collections\/capteurs\"\u003esensors\u003c\/a\u003e collections.","products":[{"product_id":"czone-interface-coi-combination-out-connecteurs-nmea2000","title":"Combined output interface COI with connectors","description":"\u003cp\u003eThe CZone COI combined interface represents an advanced centralization solution for modern marine electrical systems. Designed to simplify NMEA 2000 network architectures, it consolidates the functions of multiple switching and acquisition modules (inputs\/outputs) into a single IPX5-certified housing. This approach drastically reduces the number of connections on the backbone while optimizing onboard clutter and wiring.\u003c\/p\u003e\n\n\u003ch3\u003eSwitching capabilities and power management\u003c\/h3\u003e\n\u003cp\u003eThe module manages a total continuous capacity of 150 A at 40°C across a voltage range of 9 to 32 V. It deploys 30 distinct channels, including 16 smart outputs. The 4 high-power output channels (25 A) are specifically suited for bilge pumps, featuring manual control and fault detection without additional wiring. The 12 low-power channels (10 A) include dimming functionality, ideal for lighting control. Each circuit benefits from individual current monitoring.\u003c\/p\u003e\n\n\u003ch3\u003eData acquisition and hardware safety\u003c\/h3\u003e\n\u003cp\u003eBeyond switching, the interface integrates 8 versatile analog inputs (positive\/negative switching, 0-32 V, 0-1000 Ohm, 4-20 mA) and 6 digital inputs via a fan-out cable. Safety is central to its design: in addition to configurable electronic fuses, the system includes mechanical protection via ATC fuses with manual bypass functionality. This redundancy ensures absolute service continuity for critical equipment, compliant with ABYC and CE standards.\u003c\/p\u003e\n\n\u003ch3\u003ePositioning within the CZone range\u003c\/h3\u003e\n\u003cp\u003eUnlike the bare reference (80-911-0120-00), this specific version (80-911-0119-00) ships complete with its Deutsch industrial connector kit. This technical choice makes it a ready-to-use (plug-and-play) solution for installers, simplifying system updates via its built-in USB port, which allows configuration uploads without additional network interfaces.\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":53723813740884,"sku":"80-911-0119-00","price":2021.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506591658324-1000.jpg?v=1783602153"},{"product_id":"czone-mi-interface-compteur-nmea2000","title":"CZone MI meter interface","description":"\u003cp\u003e\n    Designed for complete integration of marine and mobile electrical systems, the CZone MI meter interface (80-911-0005-00) enables detailed monitoring of AC and DC power supplies. This device centralizes data from various current and voltage sensors, then broadcasts it over the CZone\/NMEA 2000 network, providing a unified view of the vessel’s or vehicle’s energy status.\n\u003c\/p\u003e\n\n\u003ch3\u003eAC and DC monitoring capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    The CZone MI interface features three AC voltage inputs and two AC current inputs, enabling calculation of true RMS power. For DC monitoring, it has three DC voltage inputs and two DC current inputs, with measurement resolution down to 0.1A. These features allow precise calculation of battery capacity in ampere-hours and remaining charge percentage, a critical function for energy management. CZone modules stand out for their modular approach, unlike integrated systems such as some MFDs (multifunction displays) that sometimes include basic monitoring functions. The MI is a dedicated and advanced module for more complex systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    With dimensions of 100 mm (H) x 156 mm (L) x 42 mm (D) and a weight of 281 g, the module is compact. It features IPX5 immersion protection and is ignition-protected, making it suitable for demanding marine environments. The CZone MI simplifies electrical installation by replacing complex wiring with a robust NMEA 2000 network connection. It outputs standard NMEA 2000 power monitoring frames, ensuring broad compatibility with compatible displays and management systems. User-configurable alarm levels can be set for all inputs, providing proactive monitoring. EMC certifications, including IEC EN 60945, IEC EN 61000, FCC Class B, ISO 7637-1, and ISO 7637-2, attest to its compliance with industrial standards for light and commercial vehicles.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":53723817869652,"sku":"80-911-0005-00","price":362.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506593263956-1000.jpg?v=1783602194"},{"product_id":"czone-module-interface-pont-masterbus","title":"MasterBus Bridge Interface Module","description":"\u003cp\u003e\n    The CZone to MasterBus bridge module (part number 80-911-0072-00) is designed to interconnect MasterBus and CZone networks, enabling unified communication and synergistic operation of onboard systems. This integration allows centralized control and monitoring of equipment from MasterBus or CZone displays, as well as other compatible products.\n\u003c\/p\u003e\n\n\u003ch3\u003eUnified Integration and Control\u003c\/h3\u003e\n\u003cp\u003e\n    This module provides a physical connection between the two networks, making them function as a single coherent system. It enables control of Mastervolt inverters and chargers via CZone displays, switches, or integrated products. Similarly, CZone output devices such as lights and pumps can be controlled via MasterBus displays and switches. The module also facilitates displaying CZone system data (tank levels, power levels) on MasterBus displays, and vice versa, MasterBus data on CZone displays. Alarm transfer between the two systems is also supported.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With dimensions of 69 x 69 x 50 mm and a weight of 0.145 kg, this compact module consumes only 60 mA (720 mW). It features IP65 protection, ensuring resistance to dust and water spray, and uses an NMEA 2000 Micro connector. Integration with the NMEA 2000-certified CZone system allows simplified network architecture with a single backbone for multiple systems. This module replaces complex wiring with a simple data link, reducing installation time and cable clutter. It supports decentralized DC power distribution, positioning circuit control and protection modules closer to loads to optimize cable lengths, cost, and weight. Its LED functions (green for active\/OK, flashing orange for traffic, red for fault) provide quick diagnostics of the connection status.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":53723818230100,"sku":"80-911-0072-00","price":276.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506593624404-1000.jpg?v=1783602205"},{"product_id":"czone-oi-interface-sortie-numerique-nmea2000","title":"CZone OI Output Interface","description":"\u003cp\u003e\n    Designed to modernize marine and RV electrical systems, the CZone OI output interface (part number 80-911-0009-00) is an intelligent digital switching solution. It replaces traditional circuit breaker and fuse panels, simplifying installation while providing centralized control and monitoring. Integrated into the Navico Group’s CZone ecosystem, this interface enables optimized management of onboard circuits via the NMEA 2000 network.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications of the CZone OI output interface\u003c\/h3\u003e\n\u003cp\u003e\n    The CZone OI interface features six robust output channels, each handling up to 20 amperes for power, control, and circuit switching. It includes four levels of backup fuses, including a manual override system, compliant with ABYC requirements. Fuse sizes are programmable via software. Inputs can be configured with high and low alarm thresholds. The device offers IPX5 water ingress protection and consumes 85 mA in operation (60 mA in standby) at 12 V. Its dimensions are 128 x 200 x 45 mm.\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem integration and flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    Connectivity is provided via a six-pin connector compatible with cables up to 16 mm² (6 AWG), with terminations achievable using a standard flathead screwdriver—no specialized crimping tools required. This compact, non-metallic module includes features such as timers and dimmers. Its design allows multiple channels to be linked for higher current switching capacities. Compared to older or less integrated solutions, the CZone OI output interface offers increased flexibility and simplified wiring, typical of advanced digital switching systems like CZone, versus more traditional electrical distribution architectures.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":53723818393940,"sku":"80-911-0009-00","price":641.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506593788244-1000.jpg?v=1783602210"},{"product_id":"czone-sci-interface-controle-commutateur-nmea2000","title":"CZone SCI switch control interface","description":"\u003cp\u003e\n    Designed to integrate physical controls into a digital switching system, the CZone SCI switch control interface (part number 80-911-0011-00) enables the connection of traditional mechanical switches to the NMEA 2000® network. This solution reduces wiring complexity while providing greater installation flexibility for control panels.\n\u003c\/p\u003e\n\n\u003ch3\u003eCZone network integration and flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    The CZone SCI interface stands out with its ability to manage 8 inputs per module, allowing up to 16 individual commands. It communicates via the NMEA 2000® protocol and uses a standard NMEA 2000® Micro connector, simplifying integration into existing architectures. Unlike CZone output modules that directly drive loads, the SCI is an input module that converts signals from physical switches into digital commands for the network. This approach allows, for example, a single switch position to control multiple CZone output interface (OI) channels, or multiple SCI switches to drive a single OI channel, offering advanced customization of functions.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features for simplified management\u003c\/h3\u003e\n\u003cp\u003e\n    Beyond its integration function, the SCI interface includes features designed to optimize the user experience. It features a dimmable backlight output for switch labels, which is particularly useful for night navigation. Integrated status indicators, via switch LEDs, display system operating codes and any faults, also with dimming capability. The module supports various types of programmable switches and includes a sequential button press function, allowing multiple actions to be assigned to specific press sequences. With compact dimensions of 156 x 100 x 42 mm and IPX5 water intrusion protection, the CZone SCI is suited to demanding marine environments.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":53723818557780,"sku":"80-911-0011-00","price":194.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/odoo-czone-sci-interface-de-controle-de-commutateur_80-911-0011-00-01.jpg?v=1779463908"},{"product_id":"czone-si-interface-signal-module-nmea2000","title":"CZone SI Signal Interface","description":"\u003cp\u003e\n    The CZone SI signal interface (part number 80-911-0013-00) serves as a central component for integrating external sensors and switches into a CZone digital switching and monitoring system. Designed to extend NMEA 2000 network capabilities, it enables centralized and automated control of circuits based on various input types.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and input versatility\u003c\/h3\u003e\n\u003cp\u003e\n    This module features 6 configurable inputs, providing flexibility for diverse marine applications. It accepts signals from traditional switches (negative, open circuit, 0-35V DC) for output control, as well as alarm triggers such as a high water level switch. The interface also supports industry-standard tank level sensors (0-5V, 10-180 Ohms, 240-33 Ohms) and general voltage or resistive signals. Specific input ranges are 0 to 1000 Ohms for resistive signals and 0 to 34 V DC for voltage signals. Each input includes a status LED indicator for easy monitoring. This versatility distinguishes it from basic input\/output modules that handle only a single signal type, positioning the SI interface as a data aggregation solution for the CZone system.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The CZone SI signal interface integrates with the NMEA 2000 network, enabling transmission of standardized data such as fluid, temperature, and pressure information to multifunction displays and other compatible devices. Its dimensions are 100 x 156 x 42 mm with a weight of 281g. With IPX5 temporary immersion protection, it is suitable for marine environments. The module complies with EMC standards IEC EN 60945, IEC EN 61000, FCC Class B, ISO 7637-1, and ISO 7637-2, ensuring electromagnetic compatibility and robustness against electrical interference. It ideally complements existing CZone systems, such as Touch 10 displays or combined modules, by serving as a gateway for non-NMEA 2000 sensors.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":53723819016532,"sku":"80-911-0013-00","price":229.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506594115924-1000.jpg?v=1783602216"},{"product_id":"mastervolt-digital-input-masterbus-4-canaux","title":"MasterBus digital input","description":"\u003cp\u003eThe \u003cstrong\u003eMasterBus Digital input\u003c\/strong\u003e from \u003cstrong\u003eMastervolt\u003c\/strong\u003e is an interface module designed to integrate traditional mechanical switches into your multiplexed data network. This device can connect up to four simple switches, converting a physical impulse into a digital signal capable of controlling any compatible equipment connected to the network (lighting, pumps, alarms).\u003c\/p\u003e\n\u003ch3\u003eIntegration and event-based control\u003c\/h3\u003e\n\u003cp\u003eUnlike a simple relay, this module offers advanced programming flexibility. It supports up to 63 configurable events via a MasterView Easy display or the PC MasterAdjust software. Each input can be set to specific behaviors: On, Off, Copy (follows switch state), Copy Invert, or Toggle (ideal for push buttons and dimming). With a minimal consumption of 0.21 mA in standby mode, it preserves the most sensitive onboard battery banks.\u003c\/p\u003e\n\u003ch3\u003ePositioning in the Mastervolt ecosystem\u003c\/h3\u003e\n\u003cp\u003eThe Digital input acts as the perfect trigger for power modules such as the Digital DC 10x10A or Digital Switching. While these distribute power to loads, the Digital input centralizes user physical commands. Supplied complete with its plug-in wiring harness, a MasterBus cable, and a terminator, its ultra-compact housing (66 x 78 x 32 mm) rated IP21 is easily mounted on a DIN rail or surface-mounted in a dry environment.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723886387540,"sku":"77030900","price":132.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506645561684-1000.jpg?v=1783602972"},{"product_id":"bep-ac-vsen-4-transducteur-tension-ac-czone","title":"AC voltage transducer for Digital \u0026 CZone","description":"\u003cp\u003eThe BEP AC-VSEN-4 AC voltage transducer is designed for precise and reliable monitoring of alternating current electrical systems on board. Unlike a simple analog voltmeter, this compact module integrates three internal voltage transformers, allowing simultaneous monitoring of up to three distinct AC sources (shore power, generator, inverter). It converts this data into usable digital information, directly compatible with CZone and BEP Digi switching and monitoring networks.\u003c\/p\u003e\n\n\u003ch3\u003eSystem integration and benefits\u003c\/h3\u003e\n\u003cp\u003eThe AC-VSEN-4 stands out from other transducers in the BEP range due to its multi-source capability, eliminating the need for multiple individual modules. It connects directly to a CZone Signal Interface (SI) or a BEP Digi system, displaying real-time voltages on compatible multifunction displays. This approach advantageously replaces several bulky analog gauges, reducing wiring complexity and freeing up space on the electrical panel. The system allows configuration of custom alarms for undervoltage or overvoltage conditions, protecting sensitive equipment.\u003c\/p\u003e\n\n\u003ch3\u003eConstruction and marine reliability\u003c\/h3\u003e\n\u003cp\u003eManufactured in New Zealand, the AC-VSEN-4 is built with marine-grade materials to withstand vibration, moisture, and temperature variations. Its compact dimensions (69 x 140 x 50 mm) facilitate installation in confined spaces. It integrates seamlessly into CZone energy management systems, providing a professional and centralized AC monitoring solution essential for safety and optimizing onboard electrical consumption.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721625911636,"sku":"AC-VSEN-4","price":104.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15402997612884-1000.jpg?v=1783603095"},{"product_id":"garmin-boat-switch-010-02735-00","title":"Garmin Boat Switch digital switching module","description":"\u003cp\u003eThe Garmin Boat Switch digital switching module (part number 010-02735-00) provides an integrated navigation experience through digital switching, allowing you to operate and monitor onboard electrical functions directly from your Garmin GPSMAP® or ECHOMAP™ chartplotter. This all-in-one system replaces traditional two-component systems (fuse box and switches) for simplified control and use of onboard functions.\u003c\/p\u003e\n\n\u003cp\u003eIt allows control and protection of up to 20 circuits and offers four types of switches: on\/off for bilge pumps and non-dimmable lights (such as navigation lights and courtesy lights), pressure-sensitive dimmers for cabin lights, momentary outputs for horns, and timers for livewell pumps. The Boat Switch digital switching module also integrates tank probe detection and calibration for up to four tanks (fuel, freshwater, gray water, black water, and livewells).\u003c\/p\u003e\n\n\u003cp\u003eYou can monitor analog battery voltages for service and starter batteries, bilge pump operation, and connect optional physical switches. Installation is straightforward and requires no special tools or complex configuration, thanks to the included 45 cm (18 in) flying leads and color-coded wires for easy integration into existing boats.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (W x H x D): 230 x 106 x 38 mm (9.1\" x 4.2\" x 1.5\")\u003c\/li\u003e\n\u003cli\u003eWeight: 400 g (14.1 oz)\u003c\/li\u003e\n\u003cli\u003eWater resistance rating: IP65\u003c\/li\u003e\n\u003cli\u003eMaximum current: 50 A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55967521046868,"sku":"010-02735-00","price":750.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_748f19d6-baf9-4a49-ba77-9bebf9ff8f64.jpg?v=1779970696"},{"product_id":"raymarine-contura-ii-6-interrupteurs-momentanes-led-bleue-nmea2000","title":"Contura II - 6 momentary switches with blue LED and 0.2 m NMEA 2000 adapter cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine Contura II\u003c\/strong\u003e is a multiplexed control module with 6 momentary switches, designed to integrate with MPower digital switching systems. This module enables control of DC systems on board via an intuitive user interface, featuring switches with blue LED backlighting for optimal visibility.\n\u003c\/p\u003e\n\u003ch3\u003eNMEA 2000 integration and MPower platform\u003c\/h3\u003e\n\u003cp\u003e\n    The Contura II connects directly to the NMEA 2000 network via a 0.2 m adapter cable, ensuring compatibility with third-party multifunction displays (MFDs) supporting standard digital switching PGNs, including Raymarine LightHouse 4 and Garmin OneHelm. Compatible with Maretron’s MPower digital switching platform, it contributes to simplified and scalable management of DC electrical systems on vessels ranging from small boats to large yachts. Maretron’s MPower platform is NMEA 2000 certified, guaranteeing reliable integration and standardized communication.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and system benefits\u003c\/h3\u003e\n\u003cp\u003e\n    This digital switching module is part of an architecture that allows creation of custom \"modes\" for the vessel (e.g., \"fishing,\" \"anchoring,\" \"night navigation\"), activating or deactivating multiple circuits simultaneously with a single touch. It also enables the addition of extra control points, such as a second helm station, by simply connecting to the vessel’s NMEA 2000 bus. Using digital switching modules like the Contura II can reduce the complexity of traditional wiring and dashboard clutter by centralizing control of DC loads managed by MPower DC load controller modules (such as CLMD12 or CLMD16).\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076491653460,"sku":"A3801-1","price":132.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_df378ab4-437c-4767-8cb8-73d153b29953.jpg?v=1781128615"},{"product_id":"raymarine-a3801-2-module-contura-ii-6-interrupteurs","title":"Contura II - 6 momentary switches with blue LED (3-position right switch) and 0.2 m NMEA 2000 adapter cable","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine A3801-2\u003c\/strong\u003e is a Contura II control module with 6 momentary switches and a blue LED. It includes a 3-position right switch and a 0.2 m NMEA 2000 adapter cable.\u003c\/p\u003e\u003ch3\u003eControl interface\u003c\/h3\u003e\u003cp\u003eThis part number is a control module for MPower\/NMEA 2000 systems, not a simple cable accessory. It allows adding physical controls to the helm or a secondary station, provided compatible power modules are present.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076494405972,"sku":"A3801-2","price":125.73,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15500638814548-1000.jpg?v=1783603963"},{"product_id":"raymarine-a3801-4-module-contura-v-6-interrupteurs","title":"Contura V - 6 switches Power on\/off switch with blue LED (right-hand 3-position switch) and 0.2 m NMEA 2000 adapter cable","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine A3801-4\u003c\/strong\u003e is a Contura V 6-switch control module for MPower\/NMEA 2000 installations. It includes a right-hand 3-position switch, blue LEDs, and a 0.2 m NMEA 2000 adapter cable.\u003c\/p\u003e\u003ch3\u003eControl interface\u003c\/h3\u003e\u003cp\u003eThis part serves as a user interface to control onboard functions via a compatible digital switching system. It must be paired with appropriate power modules and network hardware; it is not a simple accessory cable.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076499910996,"sku":"A3801-4","price":128.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_043d9c40-f453-4ae4-aa09-42cf08e668ed.jpg?v=1781128691"},{"product_id":"maretron-ckm12-clavier-membrane-12-touches-nmea2000","title":"CKM12 - 12-button membrane keypad (number in center of button circles) with CKM to NMEA 2000 adapter cable, 0.2 m","description":"\u003cp\u003e\n    Designed to integrate with Maretron’s MPower digital switching systems, the \u003cstrong\u003eCKM12 keypad\u003c\/strong\u003e provides tactile and customizable control of onboard DC systems. This 12-button membrane keypad connects directly to the NMEA 2000 network via its 0.2 m CKM-to-NMEA 2000 adapter cable, ensuring compatibility with the MPower ecosystem and other multifunction displays (MFDs) that support standard digital switching PGNs.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntuitive and customizable control\u003c\/h3\u003e\n\u003cp\u003e\n    The CKM12 allows configuration of commands for various electrical functions, offering an intuitive user interface for managing boat equipment. It serves as a component to extend control capabilities beyond touchscreens, particularly for quick or redundant commands. Each button can be assigned to a specific function, contributing to the simplicity of the onboard system.\n\u003c\/p\u003e\n\n\u003ch3\u003eNMEA 2000 integration\u003c\/h3\u003e\n\u003cp\u003e\n    As part of the MPower platform, the \u003cstrong\u003eMaretron CKM12 keypad\u003c\/strong\u003e simplifies installation and provides distributed power control. The use of standard NMEA 2000 PGNs facilitates integration with compatible MFDs and other third-party sensors or instruments. The MPower platform is designed to be scalable, from small pleasure craft to large yachts, allowing extension or replacement of existing systems.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076507480404,"sku":"A3802-2","price":184.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/A3802-2-family-01.jpg?v=1781128776"},{"product_id":"maretron-clmd16-module-controle-charge-16-canaux","title":"28-channel load control module - 17 output channels, 11 input channels - Cables and connectors A3708, A3709 and A3710 NOT included","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine CLMD16\u003c\/strong\u003e is a load control module for digital switching systems aboard. It consolidates 28 channels, with 17 output channels and 11 input channels, to centralize the control of DC electrical loads in a Raymarine MPower\/NMEA 2000 architecture.\u003c\/p\u003e\u003ch3\u003eI\/O module for controlled electrical installation\u003c\/h3\u003e\u003cp\u003eThe CLMD16 is designed for installations where circuits must be controlled and monitored from the onboard network and compatible interfaces. The unit is supplied without cables and connectors A3708, A3709 and A3710, which must be purchased separately based on the boat's architecture.\u003c\/p\u003e\u003ch3\u003eTo be integrated into a complete project\u003c\/h3\u003e\u003cp\u003eThis module is not a standalone enclosure: it must be integrated with appropriate harnesses, protections, and control equipment. Before ordering, verify the number of circuits to control, required connection accessories, and compatibility with the existing digital switching system.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076667879764,"sku":"CLMD16","price":1246.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/CLMD16-brochure-01.jpg?v=1781130247"},{"product_id":"raymarine-module-controle-charge-28-canaux-dc","title":"28-channel load control module - 17 output channels, 11 input channels - Cables and connectors A3708, A3709 and A3710 included","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine CLMD16-R\u003c\/strong\u003e is a load control module for digital switching systems aboard. It consolidates 28 channels, with 17 output channels and 11 input channels, to centralize the control of DC electrical loads within a Raymarine MPower\/NMEA 2000 architecture.\u003c\/p\u003e\u003ch3\u003eVersion with connectors included\u003c\/h3\u003e\u003cp\u003eUnlike the standalone CLMD16 version, this reference includes the A3708, A3709 and A3710 cables and connectors. It remains an integration component that must be selected based on the number of circuits, loads to control, and the vessel's switching architecture.\u003c\/p\u003e\u003ch3\u003eTo be integrated into a complete project\u003c\/h3\u003e\u003cp\u003eThe module must be installed with the compatible protections, power supplies, and interfaces specified in the electrical project. Before ordering, verify the list of circuits to control and the necessary accessories around the module.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076668240212,"sku":"CLMD16-R","price":1279.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/CLMD16-R-brochure-01.jpg?v=1781130279"},{"product_id":"raymarine-module-yachtsense-master-controle-numerique","title":"YachtSense Master Module (12V or 24V) input ports: 2 x J1939, 2 x RS485, Ethernet \u0026 STNG","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine YachtSense Master Module (E70592)\u003c\/strong\u003e is the central component of the YachtSense modular digital control system. Designed for modern vessel automation, it provides centralized management of onboard systems and flexible integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This module integrates multiple network interfaces for extended communication. It features two J1939 connections via a Molex MX150L 16-pin connector and two RS-485 connections via the same connector type. For the network, it offers a RayNet (SeaTalkhs™) 10\/100\/1 000 Mbit\/s connector and a SeaTalkng \/ NMEA 2000 connection. A TFT LCD screen with LED backlighting is integrated for system diagnostics.\n\u003c\/p\u003e\n\n\u003ch3\u003eModular Design and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The YachtSense system is a scalable modular architecture, allowing boat builders to standardize digital control solutions across their entire product ranges. The \u003cstrong\u003eYachtSense Master Module\u003c\/strong\u003e ensures operational reliability through three levels of redundancy: an integrated keypad for manual control, system diagnostics displayed on the LCD screen, and continuous operation in case of network disruption. Manual bypass via a fuse ensures temporary power supply in case of a module failure.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The module operates on a nominal supply voltage of 12 Vdc or 24 Vdc, with an operating range of 8 Vdc to 32 Vdc. Its current consumption is 350 mA. It is designed for marine environments with IPx6 water ingress protection and can operate within a temperature range of -25°C to 55°C. Its dimensions are 165 mm (height) x 81 mm (width) x 75.5 mm (depth).\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076828442964,"sku":"E70592","price":883.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_be2603df-6c8a-44f4-9fe1-92527a591225.jpg?v=1781132255"},{"product_id":"raymarine-module-yachtsense-remote-8-sorties-controle-numerique","title":"YachtSense Remote Module (12V or 24V) with 8 x inputs or outputs (50mA)","description":"\u003cp\u003e\n    Designed to extend the capabilities of the Raymarine YachtSense digital control system, the \u003cstrong\u003eRaymarine YachtSense Remote Module E70593\u003c\/strong\u003e is an embedded systems automation solution. It integrates as an expansion unit within the YachtSense modular architecture, enabling decentralized and customizable management of onboard equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatile output capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    This module provides 8 output channels, each capable of handling a maximum current of 250 mA. This capacity allows control of a variety of low-power electrical devices aboard, such as lighting or low-consumption pumps.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eRaymarine YachtSense Remote Module E70593\u003c\/strong\u003e operates at a nominal voltage of 12 Vdc or 24 Vdc, with an operating range from 8 Vdc to 32 Vdc. It features IPx6 water ingress protection, and its operating temperature range extends from -25°C to 55°C. Connectivity is provided via 1x SeaTalkng\/NMEA 2000 and 1x RayNet connector (10\/100\/1 000 Mbits\/s), as well as CANBUS\/Serial connections via a Molex MX150L 16-pin connector. Its current draw is 250 mA.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076828705108,"sku":"E70593","price":716.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_217ee582-99f3-4c28-acf6-f1dd70bd7e09.jpg?v=1781132287"},{"product_id":"raymarine-module-puissance-yachtsense-4-ports-10a","title":"YachtSense Power Module 4 x 10A Output Ports","description":"\u003cp\u003e\n    The Raymarine YachtSense E70594 power module is a component of the YachtSense digital control system, designed for managing low-power electrical loads aboard. This module features four digital output channels, each capable of delivering a maximum current of 10 amperes. It is suitable for powering equipment such as lighting, windshield wiper motors, and other electronic devices requiring controlled power supply.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and scalability of the YachtSense system\u003c\/h3\u003e\n\u003cp\u003e\n    The E70594 module integrates into a modular and scalable architecture, enabling boat builders to design digital control solutions tailored to various boat model ranges. The YachtSense system offers expansion flexibility, with the ability to add master and remote modules to extend control capabilities. The entire system operates at a nominal voltage of 12 Vdc or 24 Vdc, with an operating range from 8 Vdc to 32 Vdc.\n\u003c\/p\u003e\n\u003ch3\u003eRobust design and integrated diagnostics\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for a marine environment, the E70594 power module features water ingress protection compliant with IPx6 standards. It operates within a temperature range from -25°C to 55°C. The YachtSense system includes redundancy features, including a keypad for manual control, an LCD screen for system diagnostics, and continuous operation even in the event of network disruption. A manual bypass via fuse is also provided for temporary power supply in case of a module failure. Its dimensions are 172 mm (height) x 28 mm (width) x 76.50 mm (depth), excluding busbars.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076828967252,"sku":"E70594","price":330.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_93b0985a-f18c-4646-934b-caec4a73d4cc.jpg?v=1781132319"},{"product_id":"raymarine-module-puissance-yachtsense-2x20a-electricite","title":"YachtSense Power Module 2 x 20 Amp Output Ports","description":"\u003cp\u003e\n    The Raymarine YachtSense E70595 power module is a digital switching solution designed for managing high-power electrical loads aboard. As part of the modular YachtSense digital control system, it enables automation and control of essential vessel equipment from the helm.\n\u003c\/p\u003e\n\u003ch3\u003eHigh-power load control\u003c\/h3\u003e\n\u003cp\u003e\n    Specifically engineered as a digital output module, the E70595 supports up to two high-power devices, providing a maximum capacity of 20 amps per channel. It is suitable for powering and controlling equipment such as pumps, fans, heaters, refrigerators, and Hi-Fi systems. The module operates with a nominal supply voltage of 12 Vdc or 24 Vdc, with an extended operating range from 8 Vdc to 32 Vdc.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The YachtSense system, of which this module is part, features a modular architecture adaptable to various vessel configurations. It includes three levels of redundancy to ensure operational continuity: an integrated keypad for manual control, an LCD screen for system diagnostics, and manual bypass via fuse in case of failure. The module is rated IPx6 for water ingress protection and can operate in temperatures ranging from -25°C to 55°C. Its compact dimensions of 160 mm x 28 mm x 76.50 mm (H\/W\/D, excluding busbars) facilitate integration into existing electrical panels.\n\u003c\/p\u003e\n\u003ch3\u003eSystem connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The YachtSense system is designed to integrate via standard marine networks. While specific connection details for this power module are not listed, the overall YachtSense system uses SeaTalkng \/ NMEA 2000 connectors, a RayNet connector for SeaTalkhs™ (10\/100\/1000 Mbits\/s), and CANBUS (J1939) and RS-485 connections via Molex MX150L connectors, ensuring seamless communication with Raymarine Axiom multifunction displays and other devices.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076829098324,"sku":"E70595","price":335.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_19168933-0905-4575-aabc-7ed7b06ba95a.jpg?v=1781132351"},{"product_id":"raymarine-module-puissance-reversible-yachtsense-20a","title":"YachtSense reversible power module YachtSense bidirectional output ports: 20 Amp","description":"\u003cp\u003e\n    Designed to integrate with the YachtSense modular digital control system, the \u003cstrong\u003eRaymarine E70596 reversible power module\u003c\/strong\u003e provides a solution for managing DC circuits requiring polarity reversal. It is specifically suited for motion applications such as hydraulic pumps, actuators, sunroofs, awnings, and electric windows.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    This module allows control of a single DC circuit with the ability to reverse its polarity, simplifying installations for bi-directional devices. It supports a maximum output of 20 amperes per channel, operating on a nominal voltage of 12 Vdc or 24 Vdc, with an operating range from 8 Vdc to 32 Vdc. Integration with the YachtSense system ensures a scalable architecture for command and control of onboard systems.\n\u003c\/p\u003e\n\u003ch3\u003eRobust Design and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eRaymarine E70596 reversible power module\u003c\/strong\u003e is designed for the marine environment, featuring IPx6 water ingress protection. Its dimensions are 160 mm (height) x 28.00 mm (width) x 76.50 mm (depth). It supports an operating temperature range from -25 °C to 55 °C and humidity up to 93 % at 40 °C. The YachtSense system includes redundancy functions such as network fault detection and manual fuse bypass, ensuring service continuity.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076829327700,"sku":"E70596","price":353.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_ca5b869a-14d8-44fd-a051-a81ab0ba45f0.jpg?v=1781132385"},{"product_id":"raymarine-module-yachtsense-signaux-4-entrees-sorties","title":"YachtSense Signal Module with 4 x inputs or 4 x outputs (50mA)","description":"\u003cp\u003e\n    Designed to integrate with Raymarine’s YachtSense digital control system, the \u003cstrong\u003eYachtSense Signal Module E70597\u003c\/strong\u003e extends automation and monitoring capabilities aboard. This versatile module provides an interface to connect up to 4 input signals or to drive 4 low-current outputs (250mA). It enables monitoring of various sensors such as tank levels, battery voltages, temperatures, or switches.\n\u003c\/p\u003e\n\n\u003ch3\u003eYachtSense system features and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The YachtSense system is a modular digital switching solution designed to provide control of onboard systems via custom user interfaces. Its modular design allows scalability across different boat model ranges. The \u003cstrong\u003eSignal Module E70597\u003c\/strong\u003e fits into this architecture by providing flexibility for signal management, allowing monitoring of critical data or control of low-current electronic devices or relays.\n\u003c\/p\u003e\n\u003cp\u003e\n    The YachtSense system features a redundant architecture with layers of redundancy, including an integrated keypad for manual control and an LCD screen for diagnostics. In the event of network disruption, the system maintains operation, and manual bypass via fuse provides temporary power in case of module failure. These reliability features also apply to the signal module, ensuring continuity of service for the monitoring and control functions it manages.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This module is designed to operate with a nominal supply voltage of 12 Vdc \/ 24 Vdc, with an operating voltage range of 8 Vdc to 32 Vdc. It supports operating temperatures from -25°C to 55°C and humidity up to 93% at 40°C. Its water ingress protection complies with IPx6, making it suitable for marine environments. Each channel of the signal module can handle a maximum output current of 250 mA and a maximum input current of 50 mA.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076829458772,"sku":"E70597","price":330.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_edbb99a8-2571-4731-833c-4da2308b2152.jpg?v=1781132421"},{"product_id":"furuno-if-2550-iec1-interface-polyvalente-programmable-nmea","title":"IF-2550-IEC1 Multipurpose and Programmable Interface (replaces MD550 and more)","description":"\u003cp\u003e\n    The multipurpose and programmable \u003cstrong\u003eFURUNO IF-2550-IEC1\u003c\/strong\u003e interface is designed to optimize the integration of marine electronic equipment. It provides a unified solution for managing NMEA data, replacing several previous units such as the MD-550, IF-1001, IF-2300, IF-2500, and IF-2503, and consolidating their features into a single module.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and NMEA Data Management\u003c\/h3\u003e\n\u003cp\u003e\n    With its \u003cstrong\u003e3 NMEA0183 inputs\u003c\/strong\u003e, the IF-2550-IEC1 allows combining data from various sources, ensuring flexible integration of systems. Its \u003cstrong\u003e8 NMEA0183 outputs\u003c\/strong\u003e can distribute data from one or two sources to multiple devices, ensuring efficient information dissemination. This interface supports NMEA0183 versions 1.5, 2.0, 3.x, and 4.x, offering extended compatibility with modern and existing equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    The IF-2550-IEC1 operates at baud rates of \u003cstrong\u003e4800 and 38400 bps\u003c\/strong\u003e, enabling fast data transfer between devices. Its compact plastic design ensures direct integration aboard. The unit includes a specialized \"Ferry\" mode to reverse heading data by 180 degrees, a useful feature for double-ended ferries. Its programmability via DIP switches allows customized configuration of functions, enabling precise adaptation to the specific needs of each installation. Power is supplied via a \u003cstrong\u003e12-24V DC\u003c\/strong\u003e input.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084163559764,"sku":"00003783100","price":1053.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-00003783100-if-2550-iec1-interface-programmable.jpg?v=1782001829"},{"product_id":"simrad-pro-mx612-boitier-jonction-interface-donnees","title":"Simrad Pro MX612 Junction Box","description":"\u003cp\u003e\n    The Simrad Pro \u003cstrong\u003eMX612 junction box\u003c\/strong\u003e is a key component of the MX612 professional navigation system, IMO-certified. It is designed for professional mariners, serving as a centralized data hub for integrating various onboard equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This junction box provides extensive connectivity options, including SimNet, NMEA 2000, and NMEA 0183. It features 12 dedicated NMEA 0183 ports: 10 are available for distributing data to other systems, and 2 are reserved for antenna communications. This multi-port interface facilitates the connection of NMEA devices such as ECDIS, AIS, and gyro systems. The unit is powered by a local 12\/24 VDC source.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The Simrad Pro \u003cstrong\u003eMX612 junction box\u003c\/strong\u003e has an NMEA 2000 Load Equivalency Number (LEN) of 1, consuming approximately 50 mA from the NMEA 2000 network. It weighs about 4 kg (approximately 8.8 lbs). It features IPx4 environmental protection, making it splash-resistant. It operates within a temperature range of -30°C to +55°C and can be stored between -25°C and +70°C. It integrates with the MX612 Command and Display Unit (CDU) and is compatible with Simrad intelligent GPS\/DGPS antennas such as the MX521A, as well as other Simrad antennas like the MX575C DGPS compass, GS70 antenna, or HS80 GPS compass. It is important to note that this junction box is not a standalone device and requires the rest of the navigation system to function.\n\u003c\/p\u003e","brand":"Simrad Pro","offers":[{"title":"Default Title","offer_id":56125988045140,"sku":"000-10916-001","price":1414.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/simrad-mx612-junction-box_000-10916-001-01.png?v=1781618651"},{"product_id":"navico-naviop-loop-m-plus-systeme-commutation-numerique","title":"Navico Naviop LOOP M+ Digital Switching System Kit","description":"\u003cp\u003e\n    The \u003cstrong\u003eNavico Naviop LOOP M+ Digital Switching System kit\u003c\/strong\u003e is a customizable monitoring and control solution designed for onboard electrical systems. This system integrates a processing unit and protocols, along with two Egon+ power distribution boards, enabling detailed management of the electrical panel down to individual fuses or relays.\n\u003c\/p\u003e\n\n\u003ch3\u003eExtended control capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    The LOOP M+ system offers 16 controlled fuse relay channels and 16 fuse channels for comprehensive management of critical onboard functions. It allows monitoring and control of equipment such as navigation lights, bilge pumps, and sound alarms. The system is configured via the Naviop Loop SetApp web application, providing a dedicated user interface accessible through a compatible multifunction display (MFD).\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and marine robustness\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for seamless integration, the LOOP M+ is compatible with existing Simrad Pro systems and supports standard marine network protocols, including Naviop CAN, NMEA 2000, and Ethernet. It features two Ethernet ports (10\/100), one USB port (Host v. 2.0), two serial ports (RS-232, RS-485, RS-422, optically isolated), and two CAN bus ports (1 kV optical isolation). The system operates on 9 to 32 V DC power and its Egon+ board is spark-proof. The main unit has IPx7 protection, while the Egon+ board is rated IP66, ensuring resistance to demanding marine environments with operating temperatures ranging from -15°C to +55°C for the main unit and -40°C to +85°C for the Egon+ board.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56131429630292,"sku":"000-14663-001","price":2866.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513924731220-1000.jpg?v=1783626478"},{"product_id":"navico-naviop-loop-m-systeme-commutation-numerique-kit","title":"Navico Naviop LOOP M Digital Switching System Kit","description":"\u003cp\u003e\n    The \u003cstrong\u003eNavico Naviop LOOP M Digital Switching System\u003c\/strong\u003e kit from Navico is a digital switching and monitoring solution for mid-sized vessels, typically between 6 and 9 meters (20-30 feet). Designed to integrate with Lowrance, Simrad, and B\u0026G multifunction displays (MFDs), this system simplifies the control and monitoring of onboard equipment.\n\u003c\/p\u003e\n\u003ch3\u003eSystem components and capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    The kit includes the Naviop OP Box processing unit and the Egon+ power distribution board. The \u003cstrong\u003eNaviop LOOP M\u003c\/strong\u003e system manages 8 relay-controlled channels with fuses and 8 fuse-only channels. The Egon+ board operates on 12 V DC power and features IP66 protection, in addition to being ignition-protected with appropriate fuses. The OP Box operates within a 9 to 32 V DC range with a maximum consumption of 0.15 A at 24 V DC and has IPx7 protection. It includes 2 Ethernet ports (10\/100) and a USB 2.0 port (max. 100 mA). Serial ports (RS-232, RS-485, RS-422, optically isolated) and two CAN bus ports (1 kV optical isolation) are also included.\n\u003c\/p\u003e\n\u003ch3\u003eMonitoring and user interface\u003c\/h3\u003e\n\u003cp\u003e\n    This system provides detailed monitoring of essential vessel data, such as engine status and performance, tank levels (fuel, water), power management (DC and AC systems), and data from various sensors. The user interface is displayed via a side panel integrated into compatible MFDs, with information grouped by function (switching, propulsion, tanks) and shown in numerical or graphical format. An EGON synoptic page provides system layout information, including fuse and relay status, enabling quick diagnostics of issues.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and advanced features\u003c\/h3\u003e\n\u003cp\u003e\n    The system is designed for simplified installation with reduced wiring complexity. Connectivity is provided via an NMEA 2000 network and Ethernet. The system allows extensive customization of graphical elements (backgrounds, logos, boat names, day\/night color schemes) and offers secure remote access via compatible PCs, smartphones, and tablets. Its integrated design helps minimize technical redundancy and duplication of devices onboard. The system complies with CE EMC Directive 2014\/30\/EU and is designed for operating temperatures from -15°C to +55°C (OP Box) and -40°C to +85°C (Egon+).\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56131537830228,"sku":"000-14664-001","price":1807.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513925583188-1000.jpg?v=1783626483"},{"product_id":"navico-naviop-loop-s-plus-systeme-commutation-numerique-kit","title":"Navico Naviop LOOP S+ Digital Switching System Kit","description":"\u003cp\u003e\n    Designed for centralized management of marine equipment, the Navico Naviop LOOP S+ digital switching system kit provides integrated control and monitoring functions. This system enables simplified interaction with various onboard equipment via a dedicated sidebar on compatible multifunction displays (MFD).\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem Capabilities and Architecture\u003c\/h3\u003e\n\u003cp\u003e\n    The Naviop LOOP S+ features 16 fused relay channels and an additional 16 fused channels, totaling 32 channels for switching and monitoring. The kit includes a \u003cstrong\u003eNAVIOP ARC\u003c\/strong\u003e protocol converter, essential for converting NMEA 2000 to J1939 protocols, ensuring extended compatibility. It uses one or two Egon+ power distribution boards, each managing 8 channels. If included, the OP-BOX offers IPX7 protection, operates on 9 to 32 V DC power, and has 2 Ethernet ports and 1 USB port.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The system is powered by a 9 to 32 V DC range. Current consumption is up to 0.15 A at 24 V DC for the OP-BOX and 1.5 mA in standby mode for the Egon+ board. The Egon+ boards have IP66 protection, while the OP-BOX, if present, is rated IPX7. The system is designed to withstand operating temperatures from -15°C to +55°C for the OP-BOX and from -40°C to +85°C for the Egon+ boards. Connectivity is provided by 2 Ethernet ports (10\/100), 1 USB port (Host v. 2.0), 2 serial ports (RS-232, RS-485, RS-422 configurable) with optical isolation, and 2 CAN bus ports with 1kV optical isolation. The system is compatible with Lowrance, Simrad, and B\u0026G MFDs, as well as existing Simrad Pro marine systems and standard marine network protocols. Configuration is performed via the Naviop Loop SetApp web application.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    The Naviop LOOP S+ offers an intuitive interface with numerous customization options for displaying information in numerical and graphical formats. It enables comprehensive monitoring of key data such as engine status and performance, fuel and tank levels, power management (DC and AC systems), propulsion systems, and data from a variety of sensors. Secure remote access is possible via compatible PCs, smartphones, and tablets. The system is designed to adapt to various existing protocols, covering boat equipment from battery systems to courtesy lights.","brand":"Navico","offers":[{"title":"Default Title","offer_id":56131613229396,"sku":"000-14665-001","price":2017.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513926893908-1000.jpg?v=1783626489"},{"product_id":"navico-naviop-loop-s-digital-switching-system-kit","title":"Navico Naviop LOOP S Digital Switching System kit","description":"\u003cp\u003e\n    The \u003cstrong\u003eNavico Naviop LOOP S Digital Switching System\u003c\/strong\u003e kit is a compact and easy-to-install digital switching solution designed for small boats. It provides centralized control and monitoring of onboard systems via an integrated sidebar on a compatible multifunction display (Lowrance, Simrad, B\u0026G). This system can also serve as a backup solution for larger vessels.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications and Features\u003c\/h3\u003e\n\u003cp\u003e\n    The system is powered by a 9–32 V DC source for the OP-Box and 8–16 V DC for the overall system (12 V DC nominal). Current consumption is up to 0.15 A at 24 V DC (OP-Box) and 1.5 mA in standby for the Egon+ board. The total current limit is 200 A, with two M8 input terminals each supporting up to 100 A. The Egon+ distribution board, the core component of the LOOP S, features 8 fused relay channels and 8 fused channels without relay control. At 12 V DC, the fused channels support up to 30 A, while the relay and fused channels (resistive load) handle up to 20 A. The maximum load for the board is 200 A. Two LOOP S systems can be combined to control up to 16 relay channels.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNaviop LOOP S\u003c\/strong\u003e is equipped with two Ethernet ports (10\/100 Mbps), one USB 2.0 port (max. 100 mA), and two serial ports (RS-232, RS-485, RS-422, software-configurable with optical isolation). It also includes two CAN bus ports with 1 kV optical isolation, using a Naviop CAN bus and NMEA 2000 via a Naviop ARC protocol converter. System configuration is simplified using the Naviop Loop SetApp web application, which generates the required configuration files. The system integrates with Simrad Pro marine ecosystems and standard marine network protocols. Over 70 icons are available for customizing control and monitoring functions.\n\u003c\/p\u003e\n\u003ch3\u003eRobustness and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for the marine environment, the system features IPX7 protection for the OP-Box and IP66 for the Egon+ board, ensuring resistance to temporary immersion and high-pressure water jets. Operating temperatures range from -15°C to +55°C for the OP-Box and from -40°C to +85°C for the Egon+ board. Storage temperatures range from -20°C to +70°C for the OP-Box and from -40°C to +125°C for the Egon+ board. It withstands mechanical shocks (SAE J2030), vibrations (SAE J1455), salt spray (96 hours per ASTM B117-94), and various chemicals. Protections include reverse polarity (-24 V DC for 5 minutes) and short circuits. The product complies with the EMC directive 2014\/30\/EU.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56131745808724,"sku":"000-14666-001","price":1167.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513927778644-1000.jpg?v=1783626495"},{"product_id":"navico-naviop-at30-convertisseur-protocole-nmea2000-can","title":"Navico Naviop AT30 Protocol Converter","description":"\u003cp\u003e\n    Conçu pour l'intégration des systèmes de bord, le \u003cstrong\u003eNavico Naviop AT30 Protocol Converter\u003c\/strong\u003e (000-14991-001) est une passerelle essentielle qui établit une communication bidirectionnelle entre le réseau NMEA2000 d'un navire et le système de commutation numérique Naviop CAN. Ce convertisseur de protocole facilite l'échange de données, permettant ainsi une gestion centralisée et unifiée des fonctions du bateau.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntégration et Compatibilité Système\u003c\/h3\u003e\n\u003cp\u003e\n    Le Naviop AT30 est un composant clé du système Naviop Digital Switching, offrant la possibilité de contrôler et de surveiller diverses fonctions du navire via des écrans intégrés, telles que l'éclairage ou les pompes de cale. Il est compatible avec les systèmes marins Simrad Pro existants et prend en charge les protocoles de réseau marin standards, assurant une interopérabilité étendue. L'AT30 fait partie intégrante du système Naviop Loop, dont les composants opèrent généralement sur une alimentation de 12 V DC (8-16 V DC).\n\u003c\/p\u003e\n\n\u003ch3\u003eConception Adaptée à l'Environnement Marin\u003c\/h3\u003e\n\u003cp\u003e\n    Le Naviop AT30 s'inscrit dans un écosystème conçu pour les contraintes de l'environnement marin. Les composants du système Naviop Loop, auquel l'AT30 appartient, sont élaborés pour une protection robuste ; par exemple, la carte de distribution de puissance Egon+ du même système bénéficie d'une classification IP66, la protégeant contre la poussière et les jets d'eau puissants.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56132358406484,"sku":"000-14991-001","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513933709652-1000.jpg?v=1783626530"},{"product_id":"navico-command-4sar-start-kit-systeme-controle-numerique","title":"Navico Command 4SAR Starter Kit","description":"\u003cp\u003e\n    Designed specifically for search and rescue (SAR) vessels, the \u003cstrong\u003eNavico Command 4SAR Start kit\u003c\/strong\u003e is a power control and ship mode system. It aims to optimize operational efficiency by enabling quick mode selections for various onboard uses and scenarios, where time is a critical factor.\n\u003c\/p\u003e\n\u003ch3\u003eSystem capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    This starter kit for digital integration and switching can manage up to 8 distinct ship modes and control 16 relay channels. This capacity provides flexibility to configure rapid responses to changing search and rescue mission requirements.\n\u003c\/p\u003e\n\u003ch3\u003eNaviop integration\u003c\/h3\u003e\n\u003cp\u003e\n    Part of Navico’s Naviop family, the \u003cstrong\u003eCommand 4SAR Start kit\u003c\/strong\u003e is classified as a digital integration and switching component. It includes the necessary wiring accessories to establish the foundation for a centralized control system onboard.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56133381128532,"sku":"000-15935-001","price":1427.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513977880916-1000.jpg?v=1783626711"},{"product_id":"simrad-pro-rf14xu-module-electronique-capteur-barre","title":"Simrad PRO RF14XU Electronic Module","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad Pro RF14XU electronic module\u003c\/strong\u003e (SKU 22501605) is a robust rudder feedback unit designed for Simrad autopilot systems and rudder angle indicators. It provides accurate rudder position data via variable frequency signals and voltage signals.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The RF14XU module features a non-flammable fiberglass-reinforced polyester housing and a corrosion-resistant seawater-proof aluminum mounting plate. It contains a potentiometer, limit switches, and an electronic drive module. The module generates a variable frequency signal for Simrad autopilots, with a 3400 Hz reference at mid-position and a 20 Hz\/degree variation (increasing as the rudder moves to port). It also outputs a proportional voltage signal for indicators, varying ±9 volts around half the supply voltage.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    Signal control is effective for ±90 degrees from mid-position, though the shaft can rotate 360 degrees. The module requires a 24V DC power supply, with a tolerance of -10% to +30%. It is rated IP56 for environmental resistance and operates within a temperature range of -15°C to +55°C. Storage temperature ranges from -30°C to +70°C. Its weight is 2.8 kg.\n\u003c\/p\u003e\n\u003ch3\u003eIntegrated Features of the RF14XU\u003c\/h3\u003e\n\u003cp\u003e\n    Built for durability and long service life, the \u003cstrong\u003eSimrad Pro RF14XU\u003c\/strong\u003e includes a robust linkage transmission and dual limit switches. The latter can serve as electrical end stops for the steering mechanism. It is designed for 1:1 mechanical connection to the rudder and is Wheelmark certified for AP50 systems, attesting to compliance with certain maritime safety standards.\n\u003c\/p\u003e","brand":"Simrad Pro","offers":[{"title":"Default Title","offer_id":56137030402388,"sku":"22501605","price":975.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"navico-egon-plus-power-distribution-12v-8-canaux","title":"Navico EGON+ Power - 12V DC 8-channel Power Distribution Module","description":"\u003cp\u003e\n    The \u003cstrong\u003eNavico EGON+ Power - 12V DC 8 Ch\u003c\/strong\u003e is a power distribution board designed for marine electrical systems, integrating fuse and relay functions. This equipment is dedicated to managing and controlling circuits aboard vessels, whether recreational or professional.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    With a 12V DC power supply, the EGON+ Power has 8 channels, each equipped with a fuse and a relay. Each fuse channel can support a maximum load of 30 A at 12V, while the relay channels (resistive load) support up to 20 A at 12V, enabling precise management of various equipment. The unit weighs 1.2 kg.\n\u003c\/p\u003e\n\u003cp\u003e\n    This module is a central component of the Naviop Loop digital switching system, offering extended control and monitoring of the boat’s functions. It is compatible with existing Simrad Pro marine systems and supports the NMEA 2000 network protocol, as well as other standard marine protocols for seamless integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and safety\u003c\/h3\u003e\n\u003cp\u003e\n    The relay behavior is designed for safety: they are deactivated and open when the EGON+ board power supply is cut, and remain in the open state during restart. The board is ignition-protected, requiring the use of ignition-protected fuses to maintain this safety feature.\n\u003c\/p\u003e\n\u003cp\u003e\n    The system offers expansion capability; it is possible to combine up to two Loop S systems to manage 16 relay channels, and the Loop M system can integrate up to two EGON+ boards. Once integrated into a Naviop Loop system, it enables monitoring and control of functions such as navigation lights and bilge pumps via the multifunction display user interface.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and certifications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNavico EGON+ Power - 12V DC 8 Ch\u003c\/strong\u003e is CE-certified and compliant with EU Directive 2014\/30\/EU (Electromagnetic Compatibility). It has been tested according to IEC 60945:2002 for marine navigation and radiocommunication equipment and systems, ensuring compliance with general requirements and test methods for marine environments.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56137054519636,"sku":"31M-336-0","price":932.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15515043889492-1000.jpg?v=1783626927"},{"product_id":"navico-egon-power-24v-dc-8-canaux-distribution-electrique","title":"Navico EGON+ Power - 24V DC 8-Channel Power Distribution Module","description":"\u003cp\u003e\n    The \u003cstrong\u003eNavico EGON+ Power - 24V DC 8 Ch\u003c\/strong\u003e is a power distribution module designed for 24V DC marine applications. It provides advanced control and monitoring capabilities, integrating with the Naviop Loop system for centralized management of onboard functions.\n\u003c\/p\u003e\n\n\u003ch3\u003eDetailed Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This module operates on a 24V DC power supply, with an input range of 9 to 32 Vdc. It features a total of 16 channels: 8 channels are equipped with fuses and relays, and 8 channels are protected by fuses only. Channels with fuse and relay support a maximum load of 20A at 24V, while fuse-only channels can handle up to 30A at 24V. The board has a total current limit of 200A, with each power connector rated for a maximum of 100A.\n\u003c\/p\u003e\n\u003cp\u003e\n    The EGON+ Power module has a dielectric withstand voltage of 80 Vdc and is rated IP66 for protection against dust and powerful water jets. It is designed to operate within a temperature range of -40°C to 85°C and can be stored from -40°C to 125°C. It uses blade-type mini fuses and 4-pin relays with a 280 footprint. Its dimensions are 158 x 121 mm (LxW) with a weight of approximately 1.2 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    Integral to the Naviop Loop system, the EGON+ module enables seamless monitoring and control of essential boat functions via a dedicated user interface, often displayed on a multifunction display. Its communication is handled via a CAN bus network, ensuring integration with other marine electronic systems. It is compatible with existing Simrad Pro marine systems and adheres to standard marine network protocols. The module’s design is ignition-protected and complies with IEC 60945:2002 for marine navigation and radiocommunication equipment and systems. It holds CE certification.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56137054912852,"sku":"31M-337-0","price":932.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15515044151636-1000.jpg?v=1783626933"},{"product_id":"bep-lbl-set-contour-lock-module-etiquetage-modulaire","title":"BEP LBL SET CONTOUR LOCK MODULE labeling kit","description":"\u003cp\u003e\n    The \u003cstrong\u003eBEP LBL SET CONTOUR LOCK MODULE (714-RAW)\u003c\/strong\u003e is a key component designed to integrate with BEP Contour modular power distribution systems. This module is specifically engineered to accommodate an interchangeable labeling system, enabling clear and customizable identification of circuits and functions aboard.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Functionality\u003c\/h3\u003e\n\u003cp\u003e\n    This module is an integral part of the patented Contour locking system, which allows individual modules such as battery switches and circuit breaker modules to be securely assembled into modular power distribution configurations. The \u003cstrong\u003eLBL SET CONTOUR LOCK MODULE\u003c\/strong\u003e ensures each circuit or function is clearly labeled, facilitating maintenance, diagnostics, and daily use of the boat’s electrical system. Labeling kits are available separately for full customization.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Contour System Design\u003c\/h3\u003e\n\u003cp\u003e\n    While the labeling module itself is an accessory, it benefits from the overall robust design of BEP Contour products. Associated components are molded from fiber-reinforced plastic, offering resistance to high temperatures and chemicals—essential in a marine environment. This construction ensures durability and reliability for the entire power distribution system, including its identification elements.\n\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":56137164292436,"sku":"714-RAW","price":12.36,"currency_code":"EUR","in_stock":true}]},{"product_id":"czone-acoi-din-mnt-pca-kit-tail-230v-interface-ca","title":"CZone ACOI DIN MNT PCA kit with 230 V cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eCZone ACOI DIN MNT PCA kit C\/W TAIL 230V\u003c\/strong\u003e (reference 80-911-0082-00) AC output interface is designed for managing and controlling AC circuits onboard. This module facilitates networking, monitoring, and control of alternating current equipment, integrating protection and load management features.\n\u003c\/p\u003e\n\n\u003ch3\u003eAC circuit management and protection\u003c\/h3\u003e\n\u003cp\u003e\n    The CZone ACOI DIN MNT PCA kit is equipped with eight 50A relays for controlling multiple AC loads. It supports 230V voltages and 50 or 60 Hz frequencies. The design allows management of various pole configurations, including double, triple, and four-pole setups, as well as two separate bus power supplies within a single unit to handle separate load groups. Each channel includes integrated current monitoring, displaying circuit status and operating current.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified integration and installation\u003c\/h3\u003e\n\u003cp\u003e\n    This module is designed for easy integration into existing systems, particularly due to its compatibility with standard DIN rails. Components are pre-wired for quick connections, simplifying installation and configuration. Advanced load management features include staggered consumer startup and delayed circuit activation, optimizing generator operation. The module also includes status LEDs and a manual bypass option for easy maintenance or troubleshooting. It provides IPx5 protection when mounted at 0°, +\/-90°, ensuring resistance to marine environments. Certifications include CE, ABYC, and NMEA.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56141860340052,"sku":"80-911-0082-00","price":946.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/family-80-911-0069-00-80-911-0082-00-1.jpg?v=1781696787"},{"product_id":"czone-coi-module-commutation-numerique-sans-connecteurs","title":"CZone COI without connectors","description":"\u003cp\u003e\n    The \u003cstrong\u003eCZone COI (Combination Output Interface) without connectors\u003c\/strong\u003e is a compact, intelligent digital switching module designed to replace traditional fuse boxes and circuit breaker panels in marine and recreational vehicle applications. It centralizes the management of electrical systems, reducing installation complexity and wiring requirements. This high-density module provides a versatile control solution for onboard equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eExtended switching and monitoring capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    The COI module integrates a total of 30 channels, with 16 output channels for precise load management. It features 4 high-current 25A outputs and 12 low-current 10A outputs, the latter being dimmable for lighting control. For monitoring, it offers 8 analog inputs compatible with positive or negative switching signals, voltages from 0 to 32V, resistances from 0 to 1000 Ohm, and currents from 4 to 20mA, enabling monitoring of sensors such as fuel levels or battery voltage. Additionally, 6 digital inputs are available via a pigtail harness for functions like wipers or sounders.\n\u003c\/p\u003e\n\n\u003ch3\u003eProtection and NMEA 2000 communication\u003c\/h3\u003e\n\u003cp\u003e\n    With a supply voltage of 9-32V and a maximum continuous current of 150A at 40°C, the COI ensures reliable power distribution. Each output channel includes configurable electronic fuse protection, complemented by an ATC mechanical fuse and bypass function, meeting ABYC and CE safety standards. The unit is rated IPX5, providing protection against water jets from all angles, and includes a USB port for software updates via USB stick. Communication is handled via the NMEA 2000 network, enabling integration with dedicated CZone displays or compatible multifunction displays. Direct control of switching functions is possible via CZone displays or Simrad MFDs, while monitoring is compatible with other brands such as Raymarine, Garmin, and Furuno (for certain data). The 4 high-power bilge pump channels offer manual control and operational status feedback without additional wiring.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56141875118420,"sku":"80-911-0120-00","price":2093.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15516422668628-1000.jpg?v=1783606448"},{"product_id":"czone-control-1-module-commutation-numerique","title":"CONTROL 1","description":"\u003cp\u003e\n    The \u003cstrong\u003eCZone Control 1\u003c\/strong\u003e is an advanced digital switching module designed to simplify the integration of electrical systems aboard ships and recreational vehicles. It combines control and monitoring functions in a single unit, reducing clutter and making installation easier.\n\u003c\/p\u003e\n\n\u003ch3\u003eControl and monitoring capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    This module features 4 high-current output channels rated at 25A and 12 low-current dimmable output channels rated at 10A for lighting management. It also includes 8 versatile analog inputs compatible with positive or negative switching, 0–32V voltage ranges, 0–1000 Ohm resistance, and 4–20mA current sensors. Additional monitoring of voltage on the main positive stud is included.\n\u003c\/p\u003e\n\n\u003ch3\u003eProtection and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Circuit protection is provided by ABYC-compliant ATC fuses, with a mechanical bypass system for added redundancy and alarms for blown fuses or bypass activation. The \u003cstrong\u003eCZone Control 1\u003c\/strong\u003e handles a maximum continuous current of 150A at 40°C. Power is supplied via M8 (positive) and M6 (negative) studs with a voltage range of 9–32V. Communication with the onboard network is managed via NMEA 2000, consuming 100mA in operation (all channels active) and 75mA (all channels inactive) at 13.2V.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The module integrates advanced CZone features such as dimming and bilge pump operation detection on the 4 high-current channels. Its robust design provides IPx5 protection against water spray when mounted at 0° or +\/-90°. Firmware and system configuration updates can be performed via a USB port using USB keys up to 32GB formatted in FAT32. The module is certified CE, ABYC, NMEA, and ISO8846\/SAEJ1171 (ignition protection).\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56141892321620,"sku":"80-911-0122-00","price":1418.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/czone-czone-control-1_80-911-0122-00-01.webp?v=1781696937"},{"product_id":"czone-touch-5-kit-interface-controle-numerique-wifi-nmea2000","title":"Touch 5 Kit","description":"\u003cp\u003e\n    Designed for onboard digital management, the \u003cstrong\u003eCZone Touch 5 kit\u003c\/strong\u003e is a control and monitoring interface featuring a compact 5-inch touchscreen display. This system allows intuitive interaction with the boat's electrical and electronic systems via a wide-screen touch interface, offering an 800 x 480 pixel resolution and 1200 nits brightness for full sunlight visibility.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCZone Touch 5 kit\u003c\/strong\u003e integrates WiFi for wireless control and monitoring via a dedicated iPad application, simplifying CZone system management. It is fully compatible with NMEA 2000 networks, ensuring seamless integration with other marine electronic equipment. A Micro SD card slot is also included for data storage or updates. The unit is powered by 12 V DC, with an operating voltage range of 10 to 17 V DC and a consumption of 900 mA at 13.5 V. Its processor is a single-core iMX61.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    With its \"glass dash\" design, the \u003cstrong\u003eCZone Touch 5 kit\u003c\/strong\u003e offers a modern aesthetic and allows for a low-profile flush mount installation. Its PCB\/ABS housing provides IPX6 and IPX7 protection against immersion and water jets, making it suitable for marine environments. It operates within a temperature range of -15°C to +55°C. Weighing 526 grams (excluding mounting accessories), it complies with CE and C-Tick (RCM) standards.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56141899694420,"sku":"80-911-0124-00","price":912.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/czone-czone-touch-5-kit_80-911-0124-00-01.webp?v=1781696976"},{"product_id":"czone-coi-touch-5-suitcase-display-systeme-gestion-numerique","title":"CZone COI\/Touch 5 Suitcase Display","description":"\u003cp\u003e\n    The \u003cstrong\u003eCZONE COI\/TOUCH 5 SUITCASE DISPLAY\u003c\/strong\u003e (part number 80-911-0130-00) is a digital management solution designed for marine environments and recreational vehicles. It integrates a Control Output Interface (COI) module with a compact touchscreen, providing comprehensive control and monitoring capabilities for embedded systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eControl Output Interface (COI) Module\u003c\/h3\u003e\n\u003cp\u003e\n    The COI module offers extended electrical management and circuit control. It features a total of 30 channels, including 4 high-power 25A outputs and 12 dimmable 10A low-power outputs. For monitoring, it includes 8 analog inputs (compatible with 0-32V, 0-1000 Ohm, and 4-20mA) and 6 digital inputs via a Digital Breakout. All 16 output channels are equipped with current monitoring. Circuit protection is provided by configurable electronic fuses, supplemented by mechanical fuses and a bypass function. The COI supports a maximum continuous current of 150A at 40°C and operates on 9-32V. It is certified CE, ABYC, and NMEA, with IPx5 protection. Communication is via NMEA 2000, with a current draw of 250mA at 12V (180mA in standby). A USB port facilitates software updates. High-power bilge pump circuits allow manual control and operation detection without additional wiring. Connections are made via Deutsch connectors.\n\u003c\/p\u003e\n\n\u003ch3\u003eCZone Touch 5 Touchscreen\u003c\/h3\u003e\n\u003cp\u003e\n    The CZone Touch 5 touchscreen is a 5-inch capacitive touch display with LED backlighting. It offers a resolution of 800 x 480 pixels and a brightness of 1200 cd\/m² for visibility in full sunlight. Designed for discreet integration, it has an IPX7 rating, making it suitable for exposed locations. The display operates on 12V DC (range 10-17V DC) with a current draw of 900 mA at 13.5V. It features NMEA 2000 connectivity, a Micro SD card reader for software updates, and WiFi functionality. The screen provides a smooth interface. WiFi connectivity enables full control of system functions via the CZone iPad app, including mode selection, monitoring, and individual circuit control. This display is compatible with CZone modules and Mastervolt systems for comprehensive monitoring of loads, tank levels, and alarms.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56141913456980,"sku":"80-911-0130-00","price":5500.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15516440822100-1000.jpg?v=1783606453"},{"product_id":"czone-contact-6-plus-module-commutation-numerique","title":"Contact 6 PLUS with connectors and seal","description":"\u003cp\u003e\n    Designed for marine environments, recreational and specialized vehicles, the \u003cstrong\u003eCZone Contact 6 PLUS\u003c\/strong\u003e digital switching module provides a robust electrical management solution. It features 6 solid-state 15A outputs, spark-proof and suitable for 12V or 24V systems. The module handles a maximum total current of 60A and provides main power via a positive M6 (1\/4\") terminal within a 9 to 32V range, with an NMEA 2000 network power supply from 9 to 16V. Its dimensions are 202.5 x 128.5 x 45mm and it weighs 0.6 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features and protection\u003c\/h3\u003e\n\u003cp\u003e\n    Each output channel of the \u003cstrong\u003eContact 6 PLUS\u003c\/strong\u003e supports 100Hz PWM dimming, enabling precise control of light intensity and soft starts. Circuit protection is ensured by ATC fuses with blown-fuse alarms and mechanical bypass on all channels for increased redundancy. The module complies with CE, ABYC, NMEA and ISO8846\/SAEJ1171 standards, and is spark-proof. Its IPx5 rating ensures resistance to water spray when mounted vertically. The operating temperature range is from -15°C to +55°C.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and power management\u003c\/h3\u003e\n\u003cp\u003e\n    NMEA 2000 connectivity is provided via a Micro-C CAN port, enabling seamless integration with multifunction displays (MFD) from major manufacturers. This integration allows direct control of electrical systems, alert notifications and circuit status indication from the display. The \u003cstrong\u003eCZone Contact 6 PLUS\u003c\/strong\u003e also includes timer functions for specific circuits and load shedding to extend battery life. Its current draw is ultra-low, with a maximum of 75mA and 0.3mA in standby. Default configurations are built-in and selectable via a DIP switch, simplifying implementation. The \"Conn \u0026 Seal\" kit includes a connector and a gumboot sealing gasket.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56141929283924,"sku":"80-911-0160-00","price":549.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15516451701076-1000.jpg?v=1783606458"},{"product_id":"czone-contact-6-plus-commutation-numerique-marine","title":"CZ CONTACT 6 PLUS B\/SENSE with connector kit","description":"\u003cp\u003e\n    Designed for electrical management of marine systems and recreational vehicles, the \u003cstrong\u003eCZone CZ CONTACT 6 PLUS B\/SENSE W\/ CNCTR kit\u003c\/strong\u003e is a digital switching solution. It can operate autonomously or integrate into a larger CZone network, providing an alternative to conventional fuse panels and wiring.\n\u003c\/p\u003e\n\n\u003ch3\u003eSwitching and protection capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    This module features 6 solid-state 15 A outputs with ignition protection. Circuit protection is provided by ATC fuses with blown-fuse detection and warning capabilities. The maximum continuous current for all connected loads must not exceed 60 A. For ABYC applications, an external fuse may be required. The module also includes a load-shedding function, automatically disconnecting non-essential loads when battery voltage drops to preserve critical autonomy.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCZ CONTACT 6 PLUS\u003c\/strong\u003e is NMEA 2000® compatible and can be used with the CZone Smart Harness for simplified installations. It integrates with chartplotters and multifunction displays (MFD) from major manufacturers, enabling direct control and receipt of error notifications as well as circuit status. Communication is via NMEA 2000. Timer functions are integrated for specific circuits, such as live wells.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical and environmental specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The module has low current draw, optimized for small electrical systems. Output connectors accept cables from 24 AWG to 8 AWG (0.5 to 6 mm²). It has an IPX5 ingress protection rating, ensuring resistance to water spray. The operating temperature range is -15°C to 55°C (5°F to 131°F). Dimensions are 100 x 156 x 42 mm and weight is 257 g. Compliance includes CE, RCM, NMEA, and ISO8846\/SAEJ1171 (ignition protection).\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56141932200276,"sku":"80-911-0161-00","price":441.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15516453437780-1000.jpg?v=1783606465"},{"product_id":"czone-control-x-plus-module-commutation-numerique-connecteurs","title":"Control X PLUS with connectors","description":"\u003cp\u003e\n    Designed to modernize and centralize marine electrical systems, the \u003cstrong\u003eCZone Control X PLUS digital switching module with connectors\u003c\/strong\u003e (part number 80-911-0230-00) integrates advanced circuit management and network connectivity. This module is a solution for installations requiring high flexibility and precise control of onboard equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eDigital power management\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eControl X PLUS\u003c\/strong\u003e features 27 configurable input and output channels, allowing adaptation to various electrical needs. It incorporates MOSFET static switching technology for improved reliability and silent operation. Current monitoring is available on all output channels, with software-configurable fuse protection via the CZone configuration tool, eliminating the need for traditional physical fuses. A reverse voltage feedback detection function on the output channels monitors external circuit activation, useful for automatic bilge pump alerts, for example. Power is supplied via a positive M6 (1\/4\") terminal with a range of 9 to 32V, and maximum consumption is 200mA (less than 5mA in standby mode).\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced control features\u003c\/h3\u003e\n\u003cp\u003e\n    This module offers control for two RGBW zones for lighting, enabling color selection, brightness adjustments, and various lighting effects. It also includes control for two reversing motors via H-bridge outputs. For windshield wipers, the \u003cstrong\u003eControl X PLUS\u003c\/strong\u003e provides a dual-speed motor controller with synchronization for up to 8 motors and three configurable intermittent timer settings, including a braking option for compatible wiper motors. NMEA 2000 connectivity (1 Micro-C CAN port, 1 LEN) ensures seamless integration into existing marine networks. A capacitive touch panel allows electronic bypass of circuits for direct control.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCZone Control X PLUS\u003c\/strong\u003e is designed for the marine environment with IPx7 protection, allowing installation in various environments (provided it is mounted vertically on a bulkhead or flat). It is spark-proof and holds CE, RCM, NMEA 2000, and UK-CA certifications. Its dimensions are 246.5 mm (w) x 137.4 mm (h) x 54.0 mm (d), and it weighs 810g. Its footprint is reduced compared to traditional relays. Molded Deutsch connectors are included for secure and reliable connections. The operating temperature range is from -15°C to +55°C.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56141978075476,"sku":"80-911-0230-00","price":2026.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15516476080468-1000.jpg?v=1783606487"},{"product_id":"czone-control-x-commutation-numerique-connecteurs","title":"Control X with connectors","description":"\u003cp\u003e\n    Designed to optimize the management of electrical systems on board, the \u003cstrong\u003eCZone Control X with connectors (80-911-0231-00)\u003c\/strong\u003e is a compact and intelligent digital switching module. It integrates advanced features for monitoring and controlling DC circuits in marine environments and recreational vehicles, offering flexibility for the design and installation of electrical systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Control X provides 23 configurable input\/output channels, allowing adaptation to the specific needs of each installation. It includes an RGBW lighting controller and a dual-speed wiper control function with synchronization for up to 8 motors and three intermittent timing settings. Its 100% solid-state switching technology (MOSFET) delivers increased reliability, silent operation, and reduced footprint compared to traditional relay-based systems. This technology also includes temperature monitoring and configurable overcurrent protection, replacing physical fuses with software-based fusing.\n\u003c\/p\u003e\n\u003cp\u003e\n    The module also provides bilge pump operation monitoring and load shedding capabilities to preserve battery autonomy. It features a NMEA 2000 interface for seamless network integration and a manual touch panel for direct control. Current monitoring is available on all output channels, and additional inputs allow shunt\/battery state-of-charge monitoring and multiplex switch tracking.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e M6 (1\/4\") positive terminal (9-32V)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNetwork supply voltage:\u003c\/strong\u003e 9-16V via NMEA 2000\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaximum power consumption:\u003c\/strong\u003e 200mA\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStandby power consumption:\u003c\/strong\u003e \u0026lt;5mA\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaximum total module current:\u003c\/strong\u003e 120A\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCircuit protection:\u003c\/strong\u003e Software fuses (configurable via CZone configuration tool)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNMEA 2000 connectivity:\u003c\/strong\u003e 1 Micro-C CAN port, 1 LEN\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOutput cable cross-section range:\u003c\/strong\u003e 0.5 - 6mm² (24AWG – 8AWG)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRGBW zones:\u003c\/strong\u003e 1\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IPx7 (mounted vertically on bulkhead or flat), flame-resistant\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e CE, RCM, NMEA 2000, UK-CA (with connectors, connector plugs, and dipswitch cover installed)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOperating temperature range:\u003c\/strong\u003e -15°C to +55°C (-5°F to +131°F)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStorage temperature range:\u003c\/strong\u003e -40°C to +85°C (-40°F to +185°F)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 246.5mm x 137.4mm x 54.0mm\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 792g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56141989413204,"sku":"80-911-0231-00","price":1455.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/navico-control-x-with-connectors_80-911-0231-00-01.jpg?v=1781697754"},{"product_id":"czone-module-interrupteur-input-resistor","title":"CZONE switch INPUT RESISTOR MODULE","description":"\u003cp\u003e\n    Designed to optimize the input capabilities of CZone digital switching systems, the \u003cstrong\u003eCZone INPUT RESISTOR SWITCH module\u003c\/strong\u003e (ref. 80-911-0234-00) is an essential accessory for marine installations requiring flexible control management.\n\u003c\/p\u003e\n\u003ch3\u003eFunctionality and integration\u003c\/h3\u003e\n\u003cp\u003e\n    This module allows up to four switches to be connected to a single input channel of a CZone system, such as Control X or Control X Plus. It is compatible with a combination of momentary and latching switches, offering flexibility in control panel design. A distinctive feature of this module is its ability to process the simultaneous pressing of multiple switches, setting it apart from other multiplexing solutions. This functionality ensures precise responsiveness even in complex usage scenarios.\n\u003c\/p\u003e\n\u003ch3\u003eCompatibility and standards\u003c\/h3\u003e\n\u003cp\u003e\n    As a component of the CZone system, it integrates with certified NMEA 2000 master modules. The CZone Control X system, for which this module is an accessory, complies with ISO 8846:2017 and EN 60948:2002 standards, and features ignition protection. Compatibility with CZone systems ensures centralized management and data monitoring via the NMEA 2000 network.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56141998129492,"sku":"80-911-0234-00","price":29.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/80-911-0234-00.png?v=1788350884"},{"product_id":"czone-68ohm-resistor-ladder-module","title":"CZone 68 ohm resistor ladder module","description":"\u003cp\u003e\n    The \u003cstrong\u003eCZone 68 Ohms Resistor Module (80-911-0235-00)\u003c\/strong\u003e is a component designed for marine digital switching and integration systems. This module integrates into CZone architectures, offering a fixed resistance of 68 Ohms.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Functionality\u003c\/h3\u003e\n\u003cp\u003e\n    As an accessory within a CZone digital switching system, this resistor module allows for signal conditioning. Resistor ladder modules are typically used for applications such as digital-to-analog conversion or detecting multiple buttons on a single analog input by creating different voltage levels. The \u003cstrong\u003eCZone 68 Ohms Resistor Ladder Module\u003c\/strong\u003e facilitates the integration of various sensors or custom interfaces into the NMEA 2000 network via CZone digital switching units.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This module is specifically characterized by its 68 Ohms resistance. It is classified as a \"Digital Switching and Integration\" product and is part of the CZone accessories family, emphasizing its role as an extension or customization within an existing installation.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56142412644692,"sku":"80-911-0235-00","price":43.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/80-911-0235-00.png?v=1788350896"},{"product_id":"czone-connect-1-hub-telemetique-iot-marine","title":"CZONE CONNECT 1","description":"\u003cp\u003e\n    The \u003cstrong\u003eCZone Connect 1\u003c\/strong\u003e is a next-generation telematics and Internet of Things (IoT) hub designed for remote monitoring and control of marine systems and recreational vehicles. It integrates seamlessly with the CZone Mobile app, providing a digital platform for users and manufacturers.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Remote Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    This device enables monitoring and control of onboard systems from any location, enhancing user convenience. The Connect 1 is specifically designed for integration with the CZone Mobile app, ensuring a branded, user-focused experience. Users gain access to real-time data on their vessel or vehicle, including boat location, engine data, battery and fuel levels, and bilge status.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The platform enhances the user experience with educational content, marine weather forecasts, and route tracking functions. For manufacturers and dealers, the Connect 1, paired with CZone Mobile, provides access to real-time telematics data via a cloud service or web portal. Its retrofit capability allows adaptation to existing configurations using the current CZone architecture.\n\u003c\/p\u003e","brand":"CZone","offers":[{"title":"Default Title","offer_id":56142416347476,"sku":"80-911-0270-00","price":2299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/80-911-0270-00.png?v=1788350907"},{"product_id":"navico-naviop-se-nova-light-board-commande-eclairage-marine","title":"Naviop SE NOVA+ Light Chart","description":"\u003cp\u003e\n    Designed specifically for demanding marine environments, the \u003cstrong\u003eNaviop SE NOVA+ Light Board\u003c\/strong\u003e from Navico is a semiconductor lighting control panel. It enables dimmable management of lighting for up to 8 separate circuits. Each circuit is individually protected by a removable fuse, ensuring enhanced safety and simplified maintenance aboard.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNaviop SE NOVA+ Light Board\u003c\/strong\u003e integrates seamlessly with the Naviop monitoring and control system via its Naviop-CAN connection. It is exclusively compatible with Naviop LOOP-P systems, ensuring optimal synergy within this ecosystem.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Weighing approximately 0.9 kg, the \u003cstrong\u003eNaviop SE NOVA+ Light Board\u003c\/strong\u003e is designed for durable performance in marine conditions. Its clearly identified connection points and plug-and-play compatibility with LOOP-P systems simplify installation. It provides precise control of lighting ambiance and optimized energy management aboard vessels.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56144345956692,"sku":"NA05-0003","price":996.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15517394075988-1000.jpg?v=1784560918"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/687f76fee362b82889078c82e95d5289.png?v=1779976479","url":"https:\/\/skysat.fr\/en-ae\/collections\/marine-io-modules.oembed","provider":"Skysat","version":"1.0","type":"link"}