{"title":"Load cell","description":"\u003ch2\u003e Effort: sailing performance is measured and controlled.\u003c\/h2\u003e\n\n\n \u003cp\u003eOptimize your racing sailboat with Skysat's \"Effort\" load sensors, designed for unparalleled accuracy. These cutting-edge measuring instruments provide a clear, real-time view of the forces acting on your rigging, enabling you to make informed tactical decisions and avoid dangerous overloads. Gain performance and safety, and sail your way to victory.\u003c\/p\u003e\n\n\n\u003ch2\u003e precise analysis of the dynamic load\u003c\/h2\u003e\n\n\n\u003cp\u003e The \"Effort\" sensors don't just measure static load. They also capture dynamic variations, crucial for understanding how your rig behaves in changing wind conditions. This in-depth analysis allows you to anticipate stresses and adjust your settings accordingly.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e Real-time measurement of loads on stays, backstays, shrouds, etc.\u003c\/li\u003e\n\n\u003cli\u003e High sampling rate for accurate capture of load peaks.\u003c\/li\u003e\n\n     \u003cli\u003eIntegrated temperature compensation for optimal reliability in all conditions.\u003c\/li\u003e\n\n\u003cli\u003e Robust stainless steel construction for maximum resistance to corrosion and impacts.\u003c\/li\u003e\n\n\u003cli\u003e Different measurement ranges are available to suit the size and type of your sailboat.\u003c\/li\u003e\n\n\u003cli\u003e Advanced noise filtering algorithms for clear and accurate reading.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e Simplified NMEA 2000 calibration and integration\u003c\/h2\u003e\n\n\n\u003cp\u003e Calibrating the \"Effort\" sensors is quick and easy, allowing for seamless integration with your existing navigation system. NMEA 2000 compatibility ensures smooth communication and clear data visualization on your multifunction display.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e Calibration procedure guided via an intuitive application.\u003c\/li\u003e\n\n\u003cli\u003e Saving calibration data for easy restoration.\u003c\/li\u003e\n\n\u003cli\u003e NMEA 2000 plug-and-play compatibility for quick integration.\u003c\/li\u003e\n\n\u003cli\u003e View real-time charging data on your compatible multifunction display.\u003c\/li\u003e\n\n     \u003cli\u003eConfigurable overload alarms for increased safety.\u003c\/li\u003e\n\n\u003cli\u003e Possibility of integrating load data into your performance analysis software.\u003c\/li\u003e\n\n\u003cli\u003e On-board diagnostics for simplified maintenance.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cb\u003eSkysat Tip:\u003c\/b\u003e Regularly analyze the load data recorded during your training sessions and regattas. This will allow you to identify weaknesses in your rigging and optimize your settings for maximum performance. Don't hesitate to consult our team of experts for a personalized analysis and recommendations specific to your sailboat.\u003c\/p\u003e","products":[{"product_id":"cyclops-smartbatten-t1-capteur-effort-latte-voile","title":"Smartbatten T1 load sensor for sail battens","description":"\u003cp\u003e\n    The \u003cstrong\u003eCYCLOPS Smartbatten T1\u003c\/strong\u003e is a wireless load sensor designed to precisely measure compressive load on sail battens. Launched in 2023, this system provides real-time data essential for tuning and optimizing sail shape on performance and racing yachts.\n\u003c\/p\u003e\n\n\u003ch3\u003eLoad measurement and accuracy\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor is specifically designed for compressive loads up to 100 kg for size 1. It is factory-calibrated and guarantees an accuracy of ±1% of its maximum working load (MWL) within a temperature range of -10 to +40℃. The \u003cstrong\u003eSmartbatten T1\u003c\/strong\u003e enables sailors to achieve and reproduce fast, precise sail settings.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and battery life\u003c\/h3\u003e\n\u003cp\u003e\n    Weighing just 22g for the sensor and a net system weight of about 44g (including sensor, adapter, and compression block), the \u003cstrong\u003eSmartbatten T1\u003c\/strong\u003e is made of titanium (Ti6Al4V) for size 1, with a PC\/ABS housing ensuring lightweight construction. It features a 0.925Wh lithium polymer battery providing 80 days of battery life in normal use (1Hz) and up to 500 days in sleep mode (\"napping mode\"). Wireless charging takes less than one hour.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSmartbatten T1\u003c\/strong\u003e uses wireless technology to relay load data. It can connect directly to a smartphone via the Cyclops Smartfittings Manager app (available on iOS and Android), enabling live load visualization, session recording, and post-race analysis. For integration with onboard instruments, the sensor can connect via a Cyclops gateway (sold separately), offering NMEA2000, NMEA0183, NKE, UDP, and MQTT outputs, and supporting up to 50 sensors.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSmartbatten T1\u003c\/strong\u003e system is designed for \"Plug and Play\" installation in C-Tech CT22 battens, with other adapter sizes available. Installation requires shortening the batten to accommodate the sensing unit. Maintenance is limited to wireless recharging of the sensor using the supplied charger. The sensor has three operating modes: on (1Hz), extended use (0.25Hz for battery conservation), and off.","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723821048148,"sku":"SBS01","price":779.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d2e91f80-3516-484e-bf0b-6f856c26c8b7.png?v=1784728971"},{"product_id":"cyclops-smartbatten-t2-capteur-effort-latte-voile","title":"Smartbatten T2 load sensor on sail batten","description":"\u003cp\u003e\n    The \u003cstrong\u003eCYCLOPS Smartbatten T2\u003c\/strong\u003e (SBS02) is a wireless compression sensor designed for direct, real-time measurement of sail batten tension. This system enables optimization of sail trim and ensures reproducible batten tensions, contributing to consistent performance on the water.\n\u003c\/p\u003e\n\n\u003ch3\u003eWireless measurement technology\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartbatten T2 integrates wireless sensor technology to provide real-time load data. It transmits information via Bluetooth to the CYCLOPS Smartfittings Manager app (available on iOS and Android) or, via a dedicated gateway (sold separately), to compatible onboard instruments supporting NMEA2000, NMEA0183, NKE, UDP, and MQTT. Users can view and analyze live load data or record it for post-sailing analysis to identify areas for improvement.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Built for demanding marine environments, the Smartbatten T2 features a Ti6Al4V titanium alloy body and a PC\/ABS housing. It is calibrated with an accuracy of ±1% of the maximum working load (MWL) across a temperature range of -10 to +40°C. The sensor can measure loads up to 400 kg. Despite its robustness, the sensor alone weighs 62 g, with a net impact of 44 g per batten once installed (including adapter and compression block, excluding the removed batten section). It is powered by a 0.925 Wh lithium polymer battery, offering up to 80 days of battery life in \"Powered on\" mode (1 Hz) and up to 500 days in \"Extended use\" mode (0.25 Hz). Wireless inductive charging takes approximately 1 hour.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the Smartbatten T2 involves partial replacement of a batten section. The system is designed to fit directly onto C-Tech CT25 battens. The sensor offers three operating modes (powered, extended use, off) and can be activated or deactivated remotely via the CYCLOPS app. Real-time batten tension monitoring is critical for racing sailboats from 40 to 80 feet, large monohulls or multihulls, and performance sails, enabling precise sail shape control and increased safety by preventing overloads.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723821179220,"sku":"SBS02","price":1205.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_533bf285-e77f-4649-b892-f6c9faada870.png?v=1784728999"},{"product_id":"cyclops-smartlink2-10t-capteur-effort-sans-fil-marin","title":"Smartlink 2 10t load cell","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eCYCLOPS Smartlink² 10t\u003c\/strong\u003e is a wireless load cell for precise tension monitoring on various rigging elements. With a maximum load capacity of 10,000 kg (10 tonnes), it delivers accuracy within ±1% of maximum working load, ensuring reliable measurements for rigging tuning and safety at sea.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² 10t features a titanium body (Ti6Al4V), contributing to its light weight of approximately 360 g and high durability. Its compact dimensions of 93 x 74 x 25 mm allow for discreet integration. The housing is made of acetal and rated IP67, ensuring resistance to immersion. The device is powered by a 0.925 Wh lithium polymer battery, providing up to 2,000 hours of operation at a 1 Hz refresh rate and up to 8,000 hours in low-power mode. Wireless inductive charging takes 1 hour for a full charge.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Data Analysis\u003c\/h3\u003e\n\u003cp\u003e\n    The load cell wirelessly connects via Bluetooth to the Smartfittings mobile app (iOS and Android), enabling real-time load monitoring, data rate configuration (from 0.1 to 10 Hz), and sensor activation\/deactivation. It can also connect directly to Vakaros Atlas 2 and Sailmon wireless displays without requiring a gateway. For deeper integration, the Smartlink² 10t can relay data via a Cyclops gateway to onboard electronics using NMEA2000, NMEA0183, NKE, UDP, and MQTT interfaces. The app and gateway provide post-race data logging features, including 1-, 10-, and 30-minute averages, GPS data, and local time.\n\u003c\/p\u003e\n\n\u003ch3\u003eApplications and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² 10t is versatile and suitable for numerous applications on running rigging, such as cunningham, downhaul, jib sheet, mainsheet, backstays, checkstays, Code 0 stowage bags, halyards, and booms. It is designed for easy inline installation with flexible lines (ropes, webbing, textile shackles), with a recommended strop diameter of 12.4 mm for optimal accuracy. Its straightforward installation and compatibility with major electronic systems make it a tool for racers and cruisers aiming to optimize performance and rigging safety.","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723821343060,"sku":"SR13","price":2695.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5b4b2ada-d68a-4bb4-a319-2df2d3fbe3bd.png?v=1784729297"},{"product_id":"cyclops-smartlink2-10t-ee-capteur-effort-marine","title":"Smartlink² 10t ee load cell","description":"\u003cp\u003e\n    Designed for precise load measurement in marine environments, the \u003cstrong\u003eCYCLOPS Smartlink² 10t ee\u003c\/strong\u003e is a wireless load cell intended for eye-to-eye or shaft-to-shaft terminations. It targets demanding applications on yachts, superyachts, and racing sailboats, particularly for offshore racing and high-performance sailing.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    This load cell is manufactured with a Ti6Al4V titanium body and a PC\/ABS housing, giving it a mass of 710 g and dimensions of 140 x 72 x 28 mm. Its robustness is confirmed by a safety factor of x4 and IP68 waterproofing, ensuring resistance to prolonged immersion. The \u003cstrong\u003eSmartlink² 10t ee\u003c\/strong\u003e offers a maximum load capacity of 10 tonnes (10,000 kg) with an accuracy of ±1% of the maximum working load, maintained between -10 and +40°C. The recommended shaft diameter for optimal accuracy is 28.6 mm.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and battery life\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCYCLOPS Smartlink² 10t ee\u003c\/strong\u003e transmits load data in real time via Bluetooth. It can connect directly to the Cyclops smartphone app (iOS and Android) or to onboard electronics via an optional Cyclops gateway box. This gateway ensures compatibility with NMEA 2000, NMEA 0183, NKE, UDP, and MQTT interfaces. Data transmission frequency is adjustable from 0.1 to 10 Hz via the app, with a factory setting of 1 Hz. Powered by a 0.925 Wh lithium polymer battery, it offers a battery life of 2,000 hours in standard mode (1 Hz) and up to 8,000 hours in extended use mode (0.25 Hz). Charging is done wirelessly via induction.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and compliance\u003c\/h3\u003e\n\u003cp\u003e\n    This load cell is designed for integration into fixed systems such as forestays, running backstays, booms, halyards, headsail tack points, mainsail sheets, and hydraulic rams. It is intended for eye-to-eye or shaft-to-shaft mounting and is not recommended with textile shackles or soft strops. The \u003cstrong\u003eSmartlink² 10t ee\u003c\/strong\u003e complies with the EU Machinery Directive 2006\/42\/EC.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723821506900,"sku":"SE03","price":3102.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_fbc00ea2-c018-476b-9932-e5c28e9bcdb5.png?v=1784729082"},{"product_id":"cyclops-smartlink2-20t-capteur-effort-sans-fil","title":"Smartlink 2 20t load cell","description":"\u003cp\u003eDesigned for demanding marine environments, the wireless load cell \u003cstrong\u003eCYCLOPS Smartlink² 20t\u003c\/strong\u003e provides precise and real-time monitoring of dynamic loads on rigging. Ideal for superyachts, offshore racing sailboats, and high-performance cruising yachts, this sensor enables optimization of sail and rigging settings while ensuring equipment safety.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Robustness\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSmartlink² 20t\u003c\/strong\u003e features a maximum load capacity of 20,000 kg (20 tonnes) and an accuracy of ±1% of the maximum working load (MWL) across a temperature range of -10°C to +40°C. Its body is made of Ti6Al4V titanium, a material known for its strength and light weight, while the Acetal housing ensures IP67\/IP68+ waterproofing. These specifications ensure durability and reliability in the harshest marine conditions, including saltwater and offshore environments.\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003eThis sensor transmits data in real time via Bluetooth to the Cyclops Smartfittings app, available on iOS and Android. The app allows you to view loads, configure the sensor (adjustable data frequency from 0.1 to 10Hz), and log sessions for post-race analysis. The \u003cstrong\u003eSmartlink² 20t\u003c\/strong\u003e can also connect directly to Vakaros and Sailmon wireless displays, or integrate with onboard electronic systems via an optional Cyclops gateway compatible with NMEA2000, NMEA0183, NKE, UDP, and MQTT. The new internal antenna improves Bluetooth range by approximately 60% compared to previous versions.\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Installation\u003c\/h3\u003e\n\u003cp\u003eWith dimensions of 107 x 88 x 39 mm and a weight of 770 g, the \u003cstrong\u003eSmartlink² 20t\u003c\/strong\u003e is compact and lightweight, minimizing inertia on the rigging. It is designed for inline integration with flexible lines (ropes, straps, textile shackles), requiring a 15 mm strop diameter for optimal accuracy. Installation is simplified with a quick-release mounting system. The device is powered by a lithium polymer battery offering up to 2,000 hours of continuous use (1Hz) and up to 8,000 hours in extended use mode. Wireless inductive charging takes approximately 1 hour. Its design with no removable parts enhances robustness and practicality at sea.","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723821703508,"sku":"SR10","price":3407.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d35dc0bd-465c-4f6d-ba44-cb7c15fcca0d.png?v=1784729216"},{"product_id":"cyclops-smartlink2-20t-ee-capteur-effort-sans-fil-titanium","title":"Smartlink² 20t ee load cell","description":"\u003cp\u003e\n    Designed for precise measurement of dynamic loads in demanding marine environments, the \u003cstrong\u003eCYCLOPS Smartlink² 20t ee\u003c\/strong\u003e is a high-performance wireless load cell. Ideal for superyachts, offshore racing sailboats and cruisers, it provides real-time tension data for halyards, sheets and backstays, optimizing rigging adjustments.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² 20t ee is made from Ti6Al4V titanium, offering an exceptional strength-to-weight ratio. Its PC\/ABS housing is rated IP68, ensuring protection against water and dust. With dimensions of 156.9 x 80 x 40 mm and a weight of 770 g, this load cell is designed for direct integration into eye-to-eye or pin-to-pin assemblies, with a shaft diameter of 34.9 mm. Its Working Load Limit (WLL) is 20 tonnes.\n\u003c\/p\u003e\n\n\u003ch3\u003eMeasurement and accuracy\u003c\/h3\u003e\n\u003cp\u003e\n    This load cell delivers an accuracy of ±1% of WLL across a temperature range from -10°C to +40°C. It is optimized for extreme loads, ensuring reliable data collection for high-stress applications. The default data transmission frequency is 1 Hz, adjustable via the Smartfittings app between 0.1 and 10 Hz.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and features\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² 20t ee connects via Bluetooth to the Cyclops Marine mobile app, enabling real-time data visualization and recording. For integration with onboard electronic systems (B\u0026G, Sailmon, Garmin, nke), an optional Smartfittings gateway is required. Power is supplied by a 0.925 Wh Lithium Polymer battery, offering up to 8,000 hours of autonomy in extended use mode. Charging is performed wirelessly via induction, with a full charge in 1 hour. LED indicators display charge and operational status.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723821867348,"sku":"SE05","price":4902.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_95808ad5-5840-411a-a6b0-785fd42d396b.png?v=1784729109"},{"product_id":"cyclops-smartlink2-2t-capteur-effort-sans-fil","title":"Smartlink 2 2t load sensor","description":"\u003cp\u003e\n    Designed for performance sailing and safety at sea, the wireless load sensor \u003cstrong\u003eCYCLOPS Smartlink² 2t\u003c\/strong\u003e provides accurate, real-time measurement of loads on flexible lines. With a maximum capacity of 2,000 kg (2 tonnes), this sensor is a tool for sail tuning and rig integrity monitoring.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccuracy and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² 2t stands out for its accuracy of ±1% of the maximum working load, maintained within a temperature range of -10°C to +40°C. Its body is made of Ti6Al4V titanium, a material known for its lightness and strength, particularly suited to models rated for 2 tonnes and above. The acetal housing provides waterproofing beyond IP68, ensuring protection against prolonged immersion in demanding marine environments. Its compact dimensions (79 x 55 x 19 mm) and 160 g weight minimize impact on rig dynamics and wind drag.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and data management\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor integrates Bluetooth connectivity for wireless data transmission. It connects to the Cyclops Smartfittings app, available on iOS and Android, allowing real-time load monitoring, session recording, and adjustment of transmission frequency from 0.1 Hz to 10 Hz. The Smartlink² 2t can also sync directly with Vakaros and Sailmon displays. For full integration with onboard systems, it can be connected via a Cyclops gateway, offering NMEA2000, NMEA0183, NKE, UDP, and MQTT outputs. The internal 0.925Wh lithium polymer battery provides up to 2,000 hours of continuous use at 1 Hz, extendable to 8,000 hours in power-saving mode. Wireless inductive charging allows a full charge in 1 hour, with a full day’s operation after just 1 minute of charging.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified installation and maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² 2t is designed for easy inline installation on any flexible line (halyards, sheets, strops). It requires no major modifications to existing rigging. The Smartlink² design eliminates removable parts, enhancing robustness and reliability. Bluetooth range has been increased by approximately 60% compared to the previous version. For optimal accuracy, Cyclops Marine recommends using 9 mm diameter strops for calibration.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723822063956,"sku":"SR11","price":1969.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_24abea9f-51c1-4245-a7b0-3bdd02eb09eb.png?v=1784729243"},{"product_id":"cyclops-smartlink2-2t-ee-capteur-effort-sans-fil-titane","title":"Smartlink² 2t ee load cell","description":"\u003cp\u003e\n    The wireless load cell \u003cstrong\u003eCYCLOPS Smartlink² 2t ee\u003c\/strong\u003e is designed for precise load monitoring in marine and industrial applications. Made of titanium and featuring a PC\/ABS housing, it provides a lightweight, robust, and compact solution for eye-to-eye or axle-to-axle rigging setups.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and precision\u003c\/h3\u003e\n\u003cp\u003e\n    This load cell offers a working load limit (WLL) of 2 tonnes (2000 kg) with an accuracy of ±1% of WLL, maintained across a temperature range of -10°C to +40°C. Its design, with dimensions of 97 x 52 x 17 mm and a weight of 160g, minimizes impact on rigging dynamics. The \u003cstrong\u003eSmartlink² 2t ee\u003c\/strong\u003e enables precise rigging adjustments and repeatable optimal performance settings, contributing to speed and efficiency. It is compatible with standard shackles and axle diameters between 8 and 12 mm.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and battery life\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCYCLOPS Smartlink² 2t ee\u003c\/strong\u003e wirelessly connects via Bluetooth to the Cyclops Marine app, or integrates with onboard electronics via an optional Smartfittings gateway. The data transmission rate is adjustable from 0.1 Hz to 10 Hz (default 1 Hz). Equipped with a Lithium Polymer battery (0.925 Wh), it delivers up to 8,000 hours in extended use mode (0.25 Hz), 2,000 hours in active use (1 Hz), and 2 years in standby mode. Wireless inductive charging takes approximately 1 hour, with LED indicators for charge status. The load cell is waterproof and immersion-resistant, certified to IP68.\n\u003c\/p\u003e\n\n\u003ch3\u003eReliability and safety\u003c\/h3\u003e\n\u003cp\u003e\n    The robust construction is suited to demanding marine environments. It features a safety factor of x4. The \u003cstrong\u003eSmartlink² 2t ee\u003c\/strong\u003e allows data logging for post-race analysis. Designed for immediate and easy use without complex modifications, it must not exceed the 2-tonne WLL, as loads exceeding 150% of WLL may cause permanent damage and require recalibration. The load cell is not recommended for soft shackles or soft slings and must not be used to support personnel working at height.","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723822195028,"sku":"SE01","price":1893.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_30c0c3e2-c8f5-413e-bd91-075322820066.png?v=1784729027"},{"product_id":"cyclops-smartlink2-5t-capteur-effort-sans-fil-marine","title":"Smartlink 2 5t load sensor","description":"\u003cp\u003e\n    The \u003cstrong\u003eCYCLOPS Smartlink² 5t load sensor\u003c\/strong\u003e (SR12) is a wireless load cell designed for marine applications, capable of measuring dynamic loads on lines and rigging components. This sensor offers a maximum load capacity of 5 000 kg (5 tonnes), ensuring precise tension monitoring aboard.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccuracy and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² 5t guarantees an accuracy of ±1% of its Maximum Working Load (MWL) across a temperature range of -10°C to +40°C. Its body is made of titanium (Ti6Al4V) and its housing from acetal, providing resistance to harsh marine environments. It is rated IP67 for water ingress protection, ensuring durability even during prolonged immersion. Weighing 210 g and measuring 83 x 66 x 22 mm, it integrates discreetly into your rigging system.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and battery life\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor wirelessly transmits data via Bluetooth to the Cyclops Smartfittings Manager app, available on iOS and Android, allowing real-time load monitoring and data logging for later analysis. For full integration with the boat’s electronic systems, it can connect via a dedicated Cyclops gateway, compatible with NMEA2000, NMEA0183, NKE, UDP, and MQTT interfaces. The Smartlink² 5t is powered by a 0.925 Wh lithium polymer battery, offering up to 2 000 hours of operation in standard mode, 8 000 hours in power-saving mode, and 2 years in standby mode. Wireless inductive charging takes approximately 1 hour.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimization and safety\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² 5t enables precise sail trimming and performance optimization by providing continuous, real-time load data. It also enhances safety by allowing early detection of overloads, helping to prevent rigging failures. The mobile app allows adjustment of data transmission frequency up to 10 Hz and management of sensor activation\/deactivation.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723823735124,"sku":"SR12","price":2372.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c0b6ad1f-3713-4809-bdbf-e0a2bf3a2f49.png?v=1784729271"},{"product_id":"cyclops-smartlink2-5t-ee-capteur-effort-sans-fil","title":"Smartlink² 5t ee load sensor","description":"\u003cp\u003e\n    Designed for high-performance sailing, the \u003cstrong\u003eCYCLOPS Smartlink² 5t ee\u003c\/strong\u003e is a wireless load sensor for eye-to-eye or shaft-to-shaft connections. It provides real-time load data, essential for racing sailboats, offshore rigging, and high-stress one-designs. Its titanium construction combines lightness and robustness for efficient integration into existing rigging systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccuracy and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² 5t ee offers a maximum load capacity of 5,000 kg (5 tonnes) with an accuracy of ±1% of the working load limit (WLL) within a temperature range of -10°C to +40°C. Its titanium body (Ti6Al4V) and PC\/ABS housing ensure resistance and durability suited to the marine environment. The sensor is waterproof with IP68 certification, guaranteeing prolonged immersion without compromising performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and data analysis\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor transmits load data in real time via Bluetooth to the Cyclops Smartfittings app on a smartphone. For full integration with onboard systems, it can connect via an optional bridge gateway to compatible marine displays (B\u0026G, Garmin, NKE, Sailmon, etc.), supporting NMEA 2000, NMEA 0183, NKE, UDP, and MQTT interfaces. The data transmission frequency is adjustable from 0.1 Hz to 10 Hz via the app. Data can be logged for post-race analysis, enabling continuous optimization of rigging settings and better understanding of rigging stresses. The Smartlink² 5t ee is equipped with a 0.925 Wh lithium polymer battery offering up to 8,000 hours of autonomy in low-power mode and charges wirelessly in 1 hour.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723823898964,"sku":"SE02","price":2443.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_fe132336-8835-404e-8d81-65e80401649d.png?v=1784729052"},{"product_id":"cyclops-smartlink2-nano-capteur-effort-sans-fil","title":"Smartlink 2 nano load sensor","description":"\u003cp\u003e\n    Designed for fast and sensitive vessels, the \u003cstrong\u003eCYCLOPS Smartlink² nano\u003c\/strong\u003e is a compact wireless load sensor. It provides precise measurement of loads on textile lines, giving sailors dynamic data to optimize performance and safety. Weighing 72g and measuring 64 x 55 x 17 mm, it is suitable for dinghies, foilers, windsurf boards, and kiteboards.\n\u003c\/p\u003e\n\n\u003ch3\u003ePrecision and robustness for performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² nano offers a maximum working load (MWL) of 600 kg and an accuracy of ±1% of the MWL, i.e., ±6 kg. Its housing is made of acetal, ensuring robustness and waterproofing beyond IP68 standards. Designed without removable parts, it is suited to extreme marine conditions. The sensor’s design minimizes drag, an asset for racing sailboats.\n\u003c\/p\u003e\n\n\u003ch3\u003eWireless connectivity and extended integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Smartlink² nano connects wirelessly via Bluetooth to the Smartfittings app, available on iOS and Android, allowing real-time load monitoring and data recording for post-race analysis. It can also sync directly with Vakaros Atlas 2 and Sailmon MAX wireless displays. For full integration with onboard electronic systems, an optional Cyclops gateway enables data transmission via NMEA2000, NMEA0183, NKE, UDP, and MQTT, ensuring compatibility with brands such as B\u0026G, Garmin, Raymarine, and others. Its new internal antenna improves Bluetooth range by approximately 60% compared to previous models.\n\u003c\/p\u003e\n\n\u003ch3\u003ePower management and installation\u003c\/h3\u003e\n\u003cp\u003e\n    Powered by a lithium polymer battery, the Smartlink² nano offers up to 2000 hours of continuous use. Charging is done wirelessly via induction, with a full charge in 1 hour and 1 minute of charging providing a day of use. The sensor is designed to be installed inline on strops, halyards, or other soft textile lines. For optimal accuracy, Cyclops Marine recommends using Dyneema strops with a finished diameter of 4.0 mm.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723824095572,"sku":"SR09","price":1026.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_6f7d6196-f4ec-448c-958f-ec8427745cba.png?v=1784729187"},{"product_id":"cyclops-smarttoggle-4-5t-12-7mm-capteur-effort","title":"Smarttoggle 4.5t 12.7mm load sensor","description":"\u003cp\u003e\n    Developed in collaboration with headsail furling system manufacturers, the \u003cstrong\u003eCYCLOPS Smarttoggle 4.5t 12.7mm\u003c\/strong\u003e is a wireless load sensor designed for marine applications. It provides real-time load data, optimizing sail performance and onboard safety. This sensor is intended for inline installation between your headsail furler and the sail luff line.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Smarttoggle 4.5t 12.7mm offers a maximum working load (MWL) of 4.5 tonnes (4,500 kg) and features a 12.7 mm pin diameter. Its accuracy is ±1% of calibrated load, maintained between -10 and +40°C. The sensor body is made of aluminum Al6082-T6, with an acetal housing, and is IP67 certified for splash and dust resistance. It operates at a 1 Hz frequency.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and data analysis\u003c\/h3\u003e\n\u003cp\u003e\n    This wireless sensor uses Bluetooth technology to connect directly to the Cyclops Marine smartphone app (available on iOS and Android) or, via the optional Smartfittings Gateway, to onboard electronic systems. The app allows real-time load monitoring, configurable update rates up to 10 Hz, and sensor activation\/deactivation. It also includes a logging function for post-sail data analysis and a \"Load Talk\" feature to audibly monitor loads via headphones. The Gateway, designed for under-deck mounting and IP54 rated, wirelessly receives data from up to 50 sensors and transmits via NMEA2000, NMEA0183, NKE, UDP, and MQTT. It logs data for post-race analysis and can process load data with trigonometric functions to display the load-sharing percentage between the sail and rigging.\n\u003c\/p\u003e\n\n\u003ch3\u003ePower and usage\u003c\/h3\u003e\n\u003cp\u003e\n    The Smarttoggle is powered by an internal 0.925Wh lithium-polymer battery, offering 2,000 hours of operation in \"Powered on\" mode, 8,000 hours in \"Extended use\" mode (0.25 Hz), and up to 2 years in \"Powered off\" mode. Wireless charging is supported. An LED indicates battery status and operating mode.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723824521556,"sku":"FE-04","price":1629.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_2de47b93-7ed7-4002-a478-bf657eda5cee.png?v=1784728872"},{"product_id":"cyclops-smarttoggle-capteur-effort-4t5-12mm","title":"Smarttoggle 4.5t 12mm load cell","description":"\u003cp\u003e\n    Designed for non-structural headsail furling systems, the \u003cstrong\u003eCYCLOPS Smarttoggle 4.5t 12mm\u003c\/strong\u003e is a wireless load cell that provides real-time load data. It allows sailors to optimize sail trim for sails such as Code sails and reachers, ensuring efficient furling and safe sail changes. This instrument is manufactured in the United Kingdom.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccuracy and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSmarttoggle 4.5t 12mm\u003c\/strong\u003e offers a maximum working load (MWL) of 4500 kg and a 12 mm shaft diameter. It delivers an accuracy of ±1% of the maximum working load, maintained between -10 and +40℃. Its body is made of aluminium Al6082-T6 and its housing of Acetal, ensuring IP67 waterproofing. The sensor weighs 299 g and measures 140\/51\/35 mm.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and data management\u003c\/h3\u003e\n\u003cp\u003e\n    This wireless sensor connects directly to smartphones via the free Smartfittings app, enabling real-time load visualization and data logging. It is also compatible with Vakaros and Sailmon wireless displays. For integration with wired onboard electronic systems, a connection via the Cyclops gateway (NMEA2000 Gateway - Version 3) is possible. Data update rate is 1 Hz in standard use and 0.25 Hz in power-saving mode. A 0.925 Wh lithium polymer battery provides up to 2000 hours of runtime in standard mode and up to 8000 hours in extended mode. Wireless inductive charging takes approximately 1 hour. A smart button manages power modes to preserve battery life.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCYCLOPS Smarttoggle 4.5t 12mm\u003c\/strong\u003e is installed inline, replacing the toggle or swivel in the furling line. Its compact design allows direct installation without modifications. It is compatible with textile or hybrid furling systems, including Karver KF4.5, Selden CX25e, Ubi FR150 and Karver KF6.0 models.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723824750932,"sku":"FE-02","price":1629.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_814d4445-bed5-47d6-aa7c-b3ada320ecec.png?v=1784728819"},{"product_id":"cyclops-smarttoggle-7t-capteur-effort-sans-fil","title":"Smarttoggle 7t load cell","description":"\u003cp\u003e\n    The \u003cstrong\u003eCYCLOPS Smarttoggle 7t\u003c\/strong\u003e is a wireless load cell designed for real-time monitoring of halyard tension on non-structural flying sails such as Code Zeros and asymmetric spinnakers. It enables optimization of consistent furling and sail handling by providing accurate data for performance tuning.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This load cell offers a maximum working load (MWL) of 7 tonnes (7000 kg), with an accuracy of ±1% of MWL across a temperature range from -10°C to +40°C. The pin diameter is 14 mm, with overall dimensions of 160 x 55 x 50 mm and a weight of 530 g. The body is made from aluminum Al6082-T6, while the Acetal housing provides water and dust protection with an IP68 rating.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and battery life\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSmarttoggle 7t\u003c\/strong\u003e connects via Bluetooth to the Cyclops Marine mobile application for real-time monitoring and data logging. It can also integrate with onboard electronic systems via the Cyclops Marine Gateway (sold separately), offering compatibility with displays and chartplotters from brands such as B\u0026G, Sailmon, Garmin, and Raymarine. Powered by a Lithium Polymer battery (0.925Wh), it provides up to 2,000 hours of operation in standard mode, 8,000 hours in extended use mode, and 2 years in standby mode. Wireless charging takes approximately 1 hour. An integrated smart button allows mode management and battery life preservation.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for inline installation between the flying sail furler and the sail cable, the \u003cstrong\u003eSmarttoggle 7t\u003c\/strong\u003e requires a minimum clearance of 25 mm for the furler jaw. Its pin-locking mechanism ensures secure installation. The Cyclops Marine application enables real-time load monitoring, session recording, and data analysis for continuous improvement of sail settings.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723824882004,"sku":"FE-03","price":2033.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5bb13af2-3199-4055-bf60-c64ed5455dd4.png?v=1784728846"},{"product_id":"cyclops-smarttune-1-2-capteur-effort-ridoir","title":"Smarttune 1\/2\" load sensor turnbuckle","description":"\u003cp\u003e\n    Designed for precise measurement of rigging load, the \u003cstrong\u003eCYCLOPS Smarttune 1\/2\"\u003c\/strong\u003e is a wireless load sensor intended to replace existing turnbuckles. It provides real-time monitoring of standing rigging tension, including forestays, backstays, shrouds, and runners, for optimized performance and increased onboard safety.\n\u003c\/p\u003e\n\u003ch3\u003eAccuracy and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Smarttune 1\/2\" features a standard 1\/2-inch thread and is calibrated for a 2,500 kg load, with a breaking load of 6,200 kg. It weighs 390 g and measures 60x170x26 mm. It integrates Cyclops technology for wireless data transmission, with an accuracy of +\/- 1% of the calibrated load. The Acetal housing is rated IP67, ensuring resistance to marine conditions. Power is supplied by 2 AAA batteries, providing approximately 16 months of autonomy. The 1\/4\", 5\/16\" and 1\" versions include a rechargeable LiPo battery with on\/off button and control via the app.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Data Analysis\u003c\/h3\u003e\n\u003cp\u003e\n    Real-time load data is transmitted via Bluetooth to a smartphone running the Cyclops Smartfittings app, or directly to compatible onboard instruments via an optional Cyclops gateway. This gateway enables integration with NMEA2000, NMEA0183, NKE, UDP and MQTT systems. The mobile app allows data logging for detailed post-race analysis, including GPS data integration. Features such as \"Load Talk\" allow you to hear loads through headphones. The Smarttune is compatible with third-party wireless displays like the Vakaros Atlas 2 and Sailmon MAX, as well as displays from brands such as B\u0026G and Raymarine via the Cyclops gateway.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723825078612,"sku":"TS02","price":1366.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_86fe3ac3-a5f6-467d-96a7-e73ee6e80c17.png?v=1784729363"},{"product_id":"cyclops-smarttune2-capteur-effort-ridoir-1-4-pouce","title":"Smarttune² 1\/4\" rig tension sensor","description":"\u003cp\u003e\n    Designed for racing and cruising sailboats, the \u003cstrong\u003eCYCLOPS Smarttune² 1\/4\"\u003c\/strong\u003e is a wireless rig tension sensor that provides accurate, real-time measurements of rig tension. This instrument is essential for optimizing sail shape, improving race performance, and enhancing onboard safety by preventing overloads. It replaces existing turnbuckles for simple, quick integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccuracy and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSmarttune² 1\/4\"\u003c\/strong\u003e offers ±1% accuracy relative to the calibrated maximum load, within an operating temperature range of 0 to 40°C. Its Bluetooth connectivity enables direct pairing with the Cyclops Marine mobile app (available on iOS and Android) for live data visualization, recording, and post-sail analysis. For integration with onboard electronics systems (NMEA2000, NMEA0183, NKE, UDP, MQTT), an optional Cyclops gateway is required, allowing load data to be displayed on compatible screens from major brands.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust design and simplified installation\u003c\/h3\u003e\n\u003cp\u003e\n    Constructed with a 316L stainless steel body and brass threaded inserts, complemented by an Acetal housing, the \u003cstrong\u003eSmarttune² 1\/4\"\u003c\/strong\u003e is designed to withstand demanding marine environments. It features IP68 classification, ensuring protection against prolonged immersion and dust. With dimensions of 55x112x18mm and a weight of 180g, it has a compact footprint and minimal drag. The 1\/4\" model includes an internal LiPo battery offering up to 2,000 hours of continuous use and supports wireless charging. Its design allows direct replacement of standard imperial-thread turnbuckles, simplifying installation at the dock.","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723825209684,"sku":"TS07","price":1068.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_a52db268-478b-4a7b-b224-16c9fe5ab2f5.png?v=1784729447"},{"product_id":"cyclops-smarttune2-1-capteur-effort-ridoir","title":"Smarttune 2 1\" load sensor turnbuckle","description":"\u003cp\u003e\n    Designed for rigging on large vessels, the \u003cstrong\u003eCYCLOPS Smarttune² 1\"\u003c\/strong\u003e is a wireless load sensor turnbuckle that replaces existing turnbuckles. It provides real-time load data essential for optimizing headsail shape, rig balance, and achieving repeatable settings. Its design allows for easy retrofit installation without complex modifications or dismasting.\n\u003c\/p\u003e\n\u003ch3\u003eMeasurement and Accuracy\u003c\/h3\u003e\n\u003cp\u003e\n    With a 1-inch thread size, the \u003cstrong\u003eSmarttune² 1\"\u003c\/strong\u003e is suited for high-load applications on monohulls and multihulls up to 60 feet. It offers a maximum working load (MWL) of 12 tonnes (12 000 kg) and a nominal breaking load (NBL) of 22 tonnes (22 000 kg). Measurement accuracy is ±1% of MWL within a temperature range of 0 to 40°C. The sensor provides data for fatigue monitoring and load cycle history analysis, enabling rigging lifespan assessment.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCYCLOPS Smarttune² 1\"\u003c\/strong\u003e wirelessly connects to a smartphone via the Smartfittings app using Bluetooth technology. It is also compatible with marine electronics systems such as Vakaros Atlas 2 and Sailmon MAX (directly, without a gateway) or other systems via an optional Cyclops gateway, enabling live data streaming and recording. The Smartfittings app displays live loads, records data for post-sail analysis, adjusts data frequency (up to 10Hz), and manages sensor status. The optional gateway outputs data via NMEA2000, NMEA0183, NKE, UDP, and MQTT, and can handle up to 50 sensors with IP54 waterproofing.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The sensor measures 400 x 68 x 40 mm and weighs 1.9 kg. Its housing is rated IP68 for water resistance, ensuring durability in marine environments. It is constructed from 316L stainless steel body with brass threaded inserts and an Acetal housing. The \u003cstrong\u003eSmarttune² 1\"\u003c\/strong\u003e is powered by internal rechargeable batteries, offering up to 8 000 hours of battery life in extended mode and 2 000 hours in active mode. Charging is wireless via a Cyclops charging base.","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723825373524,"sku":"TS10","price":2442.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_33ab24b3-adbb-452c-9920-168b76f3fdd6.png?v=1784729499"},{"product_id":"cyclops-smarttune2-5-16-capteur-effort-ridoir","title":"Smarttune 2 5\/16\" load sensor turnbuckle","description":"\u003cp\u003e\n    Designed for precise and immediate measurement of rigging tension load, the \u003cstrong\u003eCYCLOPS Smarttune² 5\/16\"\u003c\/strong\u003e sensor is a wireless solution that replaces existing turnbuckles. It provides real-time load data, essential for optimizing sail shape and sailing performance in all conditions. The Smarttune² also includes a fatigue life monitoring function and load cycle recording, estimating cumulative fatigue and the operational lifespan of the rigging.\n\u003c\/p\u003e\n\n\u003ch3\u003eMeasurement and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The Smarttune² 5\/16\" provides real-time load measurement with an accuracy of ±1% of its maximum working load (MWL) of 1.0 tonne, within a temperature range of 0 to 40°C. Its sampling rate is 1Hz, with custom options available. Wireless connectivity is via the CYCLOPS smartphone app (iOS and Android) or, optionally, via a Smartfittings Gateway box for integration with marine electronics systems via NMEA 2000. This version is specifically adapted for 5\/16\" (7.9 mm) wires.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and design\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the \u003cstrong\u003eCYCLOPS Smarttune² 5\/16\"\u003c\/strong\u003e is done by simply replacing the existing turnbuckle, without requiring complex rigging modifications. The sensor body is made of 316L stainless steel with brass threaded inserts, and its housing is Acetal, IP68 certified for resistance to marine environments. With dimensions of 112 x 55 x 18 mm and a weight of 180g, it includes a CR2032 battery offering 2000 hours of autonomy, to be replaced according to instructions to maintain waterproofing. The sensor is designed to operate under tension only to ensure measurement reliability.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723825537364,"sku":"TS08","price":1116.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d3893bcf-48c5-4915-8ec2-79cde1468575.png?v=1784729473"},{"product_id":"cyclops-smarttune-5-8-capteur-effort-ridoir","title":"Smarttune 5\/8\" load sensor turnbuckle","description":"\u003cp\u003e\n    Designed for precise measurement of rigging tension load, the \u003cstrong\u003eCYCLOPS Smarttune 5\/8\"\u003c\/strong\u003e is a wireless load sensor turnbuckle integrating Bluetooth technology. It is specifically sized with a 5\/8\" (15.88 mm) thread and is intended to replace existing turnbuckles to provide real-time load data.\n\u003c\/p\u003e\n\u003ch3\u003eAccuracy and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Smarttune 5\/8\" offers calibrated load measurement up to 3,800 kg (3.8 tonnes), with a breaking load of 9,500 kg. Its accuracy is ±1% of the maximum working load within a temperature range of 0 to 40 °C. This data allows sailors to finely adjust rigging tension, optimizing sail shape and boat performance in racing or cruising. It is particularly suited to stays, backstays, shrouds, and diagonals on a variety of vessels, from Olympic dinghies to superyachts.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and integration\u003c\/h3\u003e\n\u003cp\u003e\n    Load data is wirelessly transmitted and can be viewed directly via the Cyclops Marine smartphone app (iOS and Android) or integrated into onboard electronic systems using the optional Cyclops Marine gateway. This gateway provides data output via NMEA2000, NMEA0183, NKE, UDP, and MQTT, ensuring compatibility with major navigation displays. The app offers live display functions, data logging for post-sailing analysis, and a 'Load Talk' feature for load monitoring via headphones.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and battery life\u003c\/h3\u003e\n\u003cp\u003e\n    The sensor is made from durable materials, including acetal, 316L stainless steel, and brass threaded inserts, ensuring durability in marine environments. It has an IP67 waterproof rating. With dimensions of 65x230x31 mm and a weight of 620 g, it features a compact profile and low drag. The Smarttune 5\/8\" is powered by two replaceable AAA batteries, providing approximately 16 months of battery life.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723825865044,"sku":"TS05","price":1893.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_15fe2cc9-aa47-47ba-b86e-aedf3932c74b.png?v=1784729420"},{"product_id":"cyclops-smarttune-7-16-cape-31-capteur-effort-ridoir","title":"Smarttune 7\/16\" Cape 31 stay load sensor","description":"\u003cp\u003e\n    Designed to optimize performance and safety for racing and cruising sailboats, the \u003cstrong\u003eCYCLOPS Smarttune 7\/16\" Cape 31\u003c\/strong\u003e stay load sensor integrates wireless tension measurement technology into a standard rigging turnbuckle. It allows sailors to replace their existing turnbuckle to obtain real-time load data on standing rigging such as forestays, backstays, shrouds, and intermediates.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccurate Measurement and Extended Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor delivers ±1% accuracy of calibrated load, providing reliable data to fine-tune rigging settings. With a calibrated load of 1900 kg, the \u003cstrong\u003eSmarttune 7\/16\"\u003c\/strong\u003e is suitable for a variety of applications. It connects wirelessly via Bluetooth to the Cyclops Smartfittings smartphone app (iOS\/Android) and can be directly integrated with Vakaros Atlas 2 and Sailmon MAX displays. For full integration into the onboard system, an optional Cyclops gateway enables data transmission via NMEA 2000, NMEA 0183, NKE, UDP, and MQTT.\n\u003c\/p\u003e\n\n\u003ch3\u003eAutonomy and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSmarttune 7\/16\"\u003c\/strong\u003e is powered by two AAA batteries, providing approximately 16 months of autonomy. Its acetal housing is rated IP67, ensuring protection against temporary immersion and dust, and is designed for durability in marine environments. Load data can be recorded and analyzed post-sailing via the app or gateway, enabling continuous performance improvement.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723826028884,"sku":"ST03","price":1366.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_0c9d4314-b3b7-4f86-bc7e-52a252512baa.png?v=1784729340"},{"product_id":"cyclops-smarttune-7-16-capteur-effort-ridoir","title":"Smarttune 7\/16\" load cell turnbuckle","description":"\u003cp\u003e\n    Designed for precise measurement of standing rigging tension, the \u003cstrong\u003eCYCLOPS Smarttune 7\/16\" load cell turnbuckle\u003c\/strong\u003e replaces an existing turnbuckle directly. This wireless solution provides real-time load data, essential for performance optimization and onboard safety.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Load Measurement\u003c\/h3\u003e\n\u003cp\u003e\n    The Smarttune 7\/16\" features a 7\/16\" thread (approximately 11.1 mm) and is rated for a maximum load of 1900 kg (1.9 tonnes). Its accuracy is +\/- 1% of the calibrated load, ensuring reliable readings for rigging adjustments. Weighing 390g and measuring 60 x 170 x 26 mm, it has a lightweight, low-drag design. Power is supplied by two AAA batteries, providing approximately 16 months of battery life. The housing is designed for harsh marine environments, with waterproofing exceeding IP68.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Smarttune transmits data wirelessly via Bluetooth to the Cyclops Smartfittings app, available on iOS and Android. This app allows real-time load monitoring, adjustment of update frequency (up to 10 Hz), and access to the \"Load Talk\" feature for voice announcements of loads. For full integration with boat navigation systems, an optional Cyclops gateway enables data output in NMEA2000, NMEA0183, NKE, UDP, and MQTT. The sensor can also connect directly to Vakaros Atlas 2 and Sailmon MAX displays without requiring a gateway.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimization and Analysis\u003c\/h3\u003e\n\u003cp\u003e\n    By providing real-time load data for elements such as the forestay, backstay, shrouds, and diagonals, the Smarttune enables sailors to make precise and repeatable adjustments. It contributes to sail shape optimization and reduces premature rigging wear. The Smartfittings app and Cyclops gateway log data, which can be exported for post-race analysis, including GPS data for comprehensive performance tracking. The construction uses 316L stainless steel, brass threaded inserts, and an acetal housing for marine-grade robustness.","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723826159956,"sku":"TS03","price":1366.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d1d15076-82f5-440f-ab61-9ec6870fbb9a.png?v=1784729393"},{"product_id":"pixel-interrogateur-exocet-luna-technology-monitoring-structurel-fibre-optique","title":"EXOCET Luna Technology FO interrogator by Pixel sur Mer","description":"\u003cp\u003eThe \u003cstrong\u003eEXOCET Luna Technology FO interrogator by Pixel sur Mer\u003c\/strong\u003e is a critical component designed for advanced structural monitoring using fiber Bragg grating sensors. Custom-built, it combines precision, reliability, and robustness, making it essential for the most demanding marine environments, as evidenced by its successful deployments on fast intervention rigid inflatables and during offshore racing competitions such as the Vendée Globe, Route du Rhum, and Arkea Ultim Challenge. Its engineering is specifically geared toward performance and efficiency, meeting the requirements of high-end markets that demand lightweight design, low power consumption, and resistance to extreme conditions.\u003c\/p\u003e\n\u003ch3\u003eTechnical features and performance\u003c\/h3\u003e\u003cp\u003eThe Exocet integrates three core functions: a light source transmitter, signal converter, and spectrum analyzer. Its operating principle is based on sending light through the optical fiber, where Bragg grating sensors reflect part of the light beam. The interrogator then receives this reflected light to determine the wavelength specific to each sensor, enabling data visualization via the Exocet Blue box. This system stands out for its power, offering the widest bandwidth on the market and the ability to accommodate up to 100 strain measurement points distributed across 4 interrogation channels. The wavelength resolution is 1 pm, equivalent to approximately 1.2 µε or 0.1 °C, with a sampling frequency of up to 100 Hz.\u003c\/p\u003e","brand":"Pixel sur Mer","offers":[{"title":"Default Title","offer_id":55746445934932,"sku":"PIX-EXOCET-INTERROGATEUR","price":25573.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/interrogateur-psm-2.png?v=1778230097"},{"product_id":"cyclops-smartlink2-atto-1-2t-capteur-effort","title":"Smartlink 2 Atto 1.2t load sensor","description":"\u003cp\u003e\n    The CYCLOPS \u003cstrong\u003esmartlink² Atto 1.2t\u003c\/strong\u003e wireless load sensor continuously measures rigging loads, with a working load of 1200 kg and an accuracy of ±1 % of the maximum load. It provides reliable data to optimize settings for racing as well as high-performance cruising, and to prevent overloads.\n\u003c\/p\u003e\n\u003ch3\u003ePosition in the smartlink² range\u003c\/h3\u003e\n\u003cp\u003e\n    The Atto 1.2t bridges the gap between the \u003cstrong\u003esmartlink² Nano\u003c\/strong\u003e (600 kg) and the \u003cstrong\u003esmartlink² 2t\u003c\/strong\u003e (2000 kg). While the original Atto (250 kg) targets dinghies and lightweight rigs, the 1.2t version — featuring a thicker stainless steel core — is designed for \u003cstrong\u003ekeelboats, dayboats, and small sailboats\u003c\/strong\u003e. It covers a wide range of applications: control lines, sheets, halyards, and secondary shrouds.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Mounting is done via pins or shackles, or by textile tie-down (lashing) with a maximum diameter of 12 mm — the use of textile tie-downs remains the user's responsibility. The sensor is supplied without specific mounting accessories.","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":55995471528276,"sku":"SG04","price":679.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/SG04_RHS.png?v=1780305225"},{"product_id":"cyclops-pack-2-smartlink-atto-sg02","title":"2x Smartlink 2 Atto","description":"\u003cp\u003e\u003cstrong\u003eThis pack includes two Cyclops Smartlink² Atto SG02 wireless load sensors for dynamic load monitoring on small sailboats and lightweight craft.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach sensor measures up to 250 kg working load, weighs 75 g, measures 68 × 79 × 15 mm, and accepts flexible mounting up to 12 mm. Accuracy is ±1 % of maximum working load, charging takes about one hour, and battery life can reach 1,800 hours.\u003c\/p\u003e\u003ch3\u003eCompatibility and selection\u003c\/h3\u003e\u003cp\u003eThe sensors communicate with the Cyclops app and can transmit data to Vakaros Atlas 2 and Sailmon MAX displays, or to wired electronics via a compatible Cyclops gateway.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eEach Atto must be sized and installed separately with the appropriate mounting hardware. The capacities of the two sensors must not be summed as if they were a single 500 kg sensor.\u003c\/p\u003e\u003ch3\u003eOffer conditions\u003c\/h3\u003e\u003cp\u003eThe pack is listed as a distinct commercial offer without creating a supplier SKU, stock nomenclature, or reseller cost. Commercial terms remain to be confirmed before publication.\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":56538176389460,"sku":"BUNDLE-2X-SG02","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cyclops-official-01-f853fb8ba15f.png?v=1784728761"},{"product_id":"cyclops-smarttoggle-4-5t-fe05-capteur-charge-sans-fil","title":"Smarttoggle 4.5t FE05","description":"\u003cp\u003e\n    Designed for non-structural furler systems, the \u003cstrong\u003eCYCLOPS smarttoggle 4.5t FE05\u003c\/strong\u003e is a wireless load sensor that measures tension on the textile stay cable. This device optimizes furling performance and extends the lifespan of textile cables by providing real-time tension data.\n\u003c\/p\u003e\n\u003ch3\u003eMeasurement and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The smarttoggle 4.5t FE05 offers a maximum load capacity of 4500 kg (4.5 tonnes) with an accuracy of ±1% of the maximum working load (MWL). Its dimensions are 140 x 50 x 35 mm and it weighs 230 g. The connection is wireless via Bluetooth to the Smartfittings app on a smartphone, available for iOS and Android. For integration with onboard marine electronics systems, an optional Cyclops gateway allows the sensor to link to Vakaros displays, Sailmon units, and NMEA networks. The Smartfittings app enables live load visualization, session data recording with local time and GPS data, and adjustment of data refresh rate.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and battery life\u003c\/h3\u003e\n\u003cp\u003e\n    The smarttoggle 4.5t FE05 is made of Al6082-T6 aluminum with an Acetal housing providing superior sealing to IP67\/IP68+ standards. It is designed to be compact, lightweight, and low-drag. The sensor is equipped with a 0.925Wh lithium polymer battery, offering approximately 2000 hours of battery life in general use and up to 8000 hours in power-saving mode. The battery recharges wirelessly via induction. An integrated \"smartbutton\" helps preserve battery life by ensuring the device is activated only when needed. The pin diameter is 10 mm, a critical specification for mechanical integration.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":56538188480852,"sku":"FE05","price":1610.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cyclops-official-01-29dd1720f2c9_b0d2778f-1704-4b78-a524-8d0e59d56e69.png?v=1784728908"},{"product_id":"cyclops-smarttoggle-4-5t-capteur-charge-marine","title":"Smarttoggle 4.5t FE06","description":"\u003cp\u003e\n    Designed for managing luff tension on non-structural headsails, the \u003cstrong\u003eCYCLOPS smarttoggle 4.5t FE06\u003c\/strong\u003e is a wireless load sensor. Made from aluminum, it provides a compact and robust solution for the marine environment, integrating inline load measurement capabilities.\n\u003c\/p\u003e\n\u003ch3\u003eLoad measurement and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The FE06 smarttoggle has a maximum working load (MWL) of 4.5 tonnes and a 12 mm pin diameter. It delivers real-time load data, essential for optimizing headsail performance and ensuring safe furler operation. Connectivity is direct via the Smart Fittings Manager smartphone app (iOS and Android), allowing live load display and session data recording. For full integration with marine navigation systems, the sensor can connect via an optional gateway, offering compatibility with brands such as B\u0026G, Sailmon, Garmin, nke, Yacht Devices, Expedition Marine, Raymarine, A+T, and Actisense.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and battery life\u003c\/h3\u003e\n\u003cp\u003e\n    The sensor body is made from Al6082-T6 aluminum with an acetal housing, ensuring resistance to marine conditions. Its waterproofing exceeds IP67 standards. The smarttoggle is equipped with a 0.925Wh lithium polymer battery, providing up to 2,000 hours of battery life in general use mode (1 Hz), 8,000 hours in extended use mode (0.25 Hz), and up to 500 days in standby mode. Wireless charging is supported. Measurement accuracy is ±1% of MWL within a temperature range of -10 to +40°C.\n\u003c\/p\u003e\n\u003ch3\u003eUsage precautions\u003c\/h3\u003e\n\u003cp\u003e\n    It is critical not to exceed the maximum working load (MWL) of 4.5 tonnes to avoid damaging internal instrumentation and voiding the warranty. Overloading or a shock exceeding 150% of MWL may cause permanent damage and require recalibration. The smarttoggle is not designed to support personnel working at height or structural rigging elements such as stays. Periodic checks of dimensions and sensor condition are recommended. In case of significant impact to the sensor body, return to Cyclops for inspection and recalibration is required.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":56538192576852,"sku":"FE06","price":1610.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cyclops-official-01-29dd1720f2c9_1ae1fb56-ed8c-4625-8e65-3d35ffa13343.png?v=1784728933"},{"product_id":"cyclops-lp03-load-pin-filaire-sur-mesure","title":"Custom wired load pin","description":"\u003cp\u003e\u003cstrong\u003eThe Cyclops LP03 is a custom wired instrumented shaft designed to measure force in a defined integration with the client.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe only common configuration confirmed is its wired principle. Load capacity, dimensions, mechanical interfaces, material, electrical output, and cable length depend on the quote and technical definition retained.\u003c\/p\u003e\u003ch3\u003eCompatibility and selection\u003c\/h3\u003e\u003cp\u003eCompatibility cannot be inferred from another Cyclops load pin. It must be validated based on drawings, loads, environment, and project-specific electronics.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eBefore manufacturing, the dimensions of the replaced shaft, load direction, mounting constraints, and wiring requirements must be provided. No electrical standard is guaranteed without written confirmation.\u003c\/p\u003e\u003ch3\u003eOffer conditions\u003c\/h3\u003e\u003cp\u003eLP03 remains a physical product on quote, not sellable online and without a predefined price. No maximum load, material, accuracy, or generic certification is published.","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":56538198606164,"sku":"LP03","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cyclops_marine_1b8bc215-14e1-41c3-b2e1-4d710203e5bd.png?v=1784729796"},{"product_id":"cyclops-smartlink2-atto-capteur-charge-sans-fil","title":"Smartlink 2 Atto","description":"\u003cp\u003e\n    Designed for marine applications requiring precise and compact load measurement, the \u003cstrong\u003eCYCLOPS smartlink² Atto\u003c\/strong\u003e is a lightweight and rugged wireless load cell. Made of 2Cr13 stainless steel, it is intended for marine applications requiring accurate load measurement, providing real-time load data for tuning and performance optimization.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The smartlink² Atto stands out with its compact dimensions of 79×68×3 mm and a weight of 75 g, positioning it as a discreet load cell. Its working load limit (WLL) is 250 kg with an accuracy of ±1% of WLL between -10 and +40°C. The housing is made of 2Cr13 stainless steel, ensuring resistance to marine environments. The integrated battery is wirelessly rechargeable, offering up to 200 hours of battery life in general use and up to 8,000 hours in power-saving mode.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and App Features\u003c\/h3\u003e\n\u003cp\u003e\n    The sensor wirelessly connects via Bluetooth to the Smart Fittings Manager smartphone app (available on iOS and Android) or directly to compatible wireless displays. For integration into wired onboard electronic systems, an optional Cyclops gateway is available. The app allows real-time load monitoring, adding sensors via a data key or QR code, and customizing the display (units, significant figures). It includes statistical features (minimum, maximum, average) and averages over 1, 10, and 30 minutes. Data can be saved and exported in .csv format, including local time and GPS data. On iOS, Siri voice announcements are available for real-time loads.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Safety\u003c\/h3\u003e\n\u003cp\u003e\n    The smartlink² Atto is designed to be mounted inline with textile shackles or carabiners with a 12 mm diameter for precise load measurement. It is imperative not to exceed the working load limit (WLL) of 250 kg to avoid damaging internal instrumentation and voiding the warranty. Overloading beyond 150% of WLL or a significant impact may cause permanent damage requiring recalibration. The sensor is not intended to support personnel working at height. Maintenance is limited to recharging the sensor with the supplied charger; any attempt at repair or disassembly must be avoided.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":56538265026900,"sku":"SG02","price":488.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cyclops-official-01-06b53c8d42c2.png?v=1784729138"},{"product_id":"cyclops-smarttune-7-8-capteur-charge-greement","title":"Smarttune 7\/8\"","description":"\u003cp\u003e\n    The CYCLOPS smarttune 7\/8” is an innovative wireless load sensor designed to provide accurate, real-time measurement of standing rigging tension. This solution replaces existing turnbuckles, enabling the recording and replication of optimal rigging settings to maximize sail shape and regatta performance in all conditions. It contributes to rig balance, headsail shape indication, and the impact of the backstay and mainsheet on the mainsail.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and advanced features\u003c\/h3\u003e\n\u003cp\u003e\n    The smarttune 7\/8” connects wirelessly via Bluetooth to the Smartfittings smartphone app (available on iOS and Android). It can also integrate with navigation electronics systems via an optional Smartfittings Gateway box, or connect directly to Vakaros Atlas 2 and Sailmon MAX displays. The mobile app allows real-time load monitoring, intuitive recording, and adjustment of data refresh rates. It provides load statistics (minimum, maximum, average) and averages over 1, 10, and 30 minutes, with the ability to export log files in .csv format, including local time and GPS data. A \"Load Talk\" function announces live loads via Siri every 10 seconds or every minute.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and durability\u003c\/h3\u003e\n\u003cp\u003e\n    Specifically for the 7\/8” model, the sensor offers a calibrated load of 8,000 kg and a breaking load of 17,000 kg. Its accuracy is ±1% of the Maximum Working Load (MWL). The smarttune 7\/8” is powered by 2 AAA batteries, providing approximately 16 months of autonomy. Its dimensions are 70 x 320 x 40 mm. The body is made of 316L stainless steel with threaded inserts, and the housing is Acetal, ensuring waterproofing beyond IP68. The sensor provides real-time data. It is designed to withstand harsh marine environments and features an optimized design for low weight and minimal drag. It is critical not to exceed the maximum working load, as exceeding 150% of the calibrated load may cause permanent damage and require recalibration.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":56538392363348,"sku":"TS11","price":2287.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cyclops-official-01-74a481eae809_263614ef-ca24-46e9-bd27-f4ca7329709d.png?v=1784729527"},{"product_id":"cyclops-smarttune-3-4-pouces-capteur-tension-greement","title":"Smarttune 3\/4\"","description":"\u003cp\u003e\n    The \u003cstrong\u003eCYCLOPS smarttune 3\/4\"\u003c\/strong\u003e is an innovative wireless load sensor designed to replace existing turnbuckles and provide accurate, real-time rig tension measurements. This solution is ideal for performance and cruising sailboats seeking to optimize mast tuning for better sail shape and improved racing performance in various conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eMeasurement and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The smarttune 3\/4\" enables instant and repeatable rig tension measurement. Load data is transmitted wirelessly via Bluetooth and can be viewed directly on a smartphone using the CYCLOPS Smart Fittings Manager app. For deeper integration with onboard navigation systems, the sensor can connect to a display via the optional smartfittings Gateway NMEA2000 box. It is also compatible with Vakaros Atlas 2 and Sailmon MAX displays.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and durability\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor is designed for 3\/4\" (19.1 mm) shrouds. It offers a calibrated load of 5.0 tonnes (5000 kg) with an accuracy of ±1% of the maximum working load (MWL). The sensor body is made from precision-machined plastic bodies and is IP67 certified, ensuring resistance to marine environments. Powered by two AAA batteries, it provides up to 16 months of battery life. Its dimensions are 70 x 275 x 40 mm with a weight of 1500 g. The sensor is factory-calibrated for immediate reliability.\n\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":56538400489812,"sku":"TS12","price":2129.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cyclops-official-01-74a481eae809_24ea9659-d5e6-44cf-9245-79d4538fa56f.png?v=1784729552"},{"product_id":"cyclops-wp01-load-pin-sans-fil-sur-mesure","title":"Custom wireless load pin","description":"\u003cp\u003e\u003cstrong\u003eThe Cyclops WP01 is a custom-manufactured wireless instrumented pin designed to measure loads in a customer-defined installation.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIts wireless load pin identity and custom manufacturing are confirmed. Nominal load, diameter, dimensions, materials, battery life, and exact performance data are not definitively linked to the WP01 code in available sources.\u003c\/p\u003e\u003ch3\u003eCompatibility and selection\u003c\/h3\u003e\u003cp\u003eA family guide describes the use of Cyclops wireless load pins but is insufficient to automatically assign all its specifications to WP01. Configuration must be validated via quote.\u003c\/p\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eDesign requires axle drawings, expected loads, rotational constraints, and environmental conditions. Assembly and data reception must be defined prior to manufacturing.\u003c\/p\u003e\u003ch3\u003eOffer conditions\u003c\/h3\u003e\u003cp\u003eWP01 remains a physical product available only via quote, not sold online and without predefined pricing. Values from another Cyclops sensor must not be copied to this sheet.","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":56538409042260,"sku":"WP01","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cyclops_marine_3ef71a98-67d7-47b6-a7a2-dd8120bb86f4.png?v=1784729821"}],"url":"https:\/\/skysat.fr\/en-bh\/collections\/load-cell.oembed","provider":"Skysat","version":"1.0","type":"link"}