{"title":"VHF\/AIS antenna","description":"\u003ch2\u003e VHF\/AIS antennas: capturing essential maritime information\u003c\/h2\u003e\n\n\n \u003cp\u003eThe VHF\/AIS antenna is a crucial component of your communication and safety system at sea. At Skysat, drawing on our experience in offshore racing, we know that a high-performance antenna means clear information and optimal range. Discover our selection of antennas, rigorously chosen for their robustness and efficiency, and find the one that meets your specific needs.\u003c\/p\u003e\n\n\n\u003ch2\u003e choosing the right VHF\/AIS antenna\u003c\/h2\u003e\n\n\n\u003cp\u003e Choosing a VHF\/AIS antenna depends on several factors, including the type of navigation you undertake, the size of your boat, and the marine environment. It is essential to consider the antenna's gain, polarization, and compatibility with your VHF radio and AIS transponder. A well-chosen antenna ensures clear communication and reliable AIS signal reception, thus contributing to your navigational safety.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eWhip antennas:\u003c\/strong\u003e Standard solution, suitable for most uses. Check the impedance (usually 50 ohms).\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eShort antennas:\u003c\/strong\u003e Ideal for small boats or cluttered environments. Compromise on range.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVHF\/AIS Splitters:\u003c\/strong\u003e Allow you to share a single antenna between VHF and AIS. Be aware of the resulting signal loss.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCoaxial cables:\u003c\/strong\u003e The choice of coaxial cable (RG-58, RG-213, etc.) influences signal loss. Choose a high-quality cable of appropriate length.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e the importance of installation and adjustment\u003c\/h2\u003e\n\n\n \u003cp\u003eInstalling and tuning your VHF\/AIS antenna are crucial steps for optimizing its performance. Incorrect positioning or faulty wiring can lead to reduced range and poor reception. It is important to follow the manufacturer's recommendations and ensure the antenna is properly grounded. A Standing Wave Ratio (SWR) test can be helpful for verifying impedance matching and optimizing transmission.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePositioning:\u003c\/strong\u003e Install the antenna as high as possible and away from metallic obstacles.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eWiring:\u003c\/strong\u003e Use waterproof connectors and check for corrosion.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGrounding:\u003c\/strong\u003e Ensure a good connection to the boat's ground to avoid interference.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSWR test:\u003c\/strong\u003e Check the impedance match between the antenna and the VHF\/AIS radio.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e GSM\/4G antennas: Stay connected at sea\u003c\/h2\u003e\n\n\n \u003cp\u003eTo stay connected to the mobile network during your coastal or offshore sailing trips, GSM\/4G antennas amplify the signal and allow you to use your mobile devices or Wi-Fi routers on board. The choice of antenna depends on the sailing area and the quality of the available network. It is important to check the antenna's compatibility with the frequencies used by your mobile operator.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eOmnidirectional antennas:\u003c\/strong\u003e Pick up the signal from all directions, ideal for areas with weak signal.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eDirectional antennas:\u003c\/strong\u003e Offer higher gain but require precise pointing towards the signal source.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMarine-grade 4G routers:\u003c\/strong\u003e A combination of a 4G antenna and a Wi-Fi router, allowing the creation of a local network on board.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eLow-loss cables:\u003c\/strong\u003e Essential for minimizing signal loss between the antenna and the router.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cstrong\u003eSkysat's advice\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eBefore choosing your VHF\/AIS antenna, map your usual navigation areas and anticipate typical weather conditions. An oversized antenna can be an advantage in areas with poor coverage, but an antenna well-suited to your regular use will offer better overall reliability.\u003c\/p\u003e","products":[{"product_id":"belden-cable-ethernet-categorie-5e-f-utp-gris-pvc-sans-terminaison","title":"Category 5e F\/UTP Ethernet Cable, Gray, PVC, Unterminated","description":"\u003cp\u003e\u003cstrong\u003eCategory 5e F\/UTP Ethernet cable, Gray, unsheathed PVC\u003c\/strong\u003e is an Ethernet cable designed for data or Ethernet connections aboard. It can be used to complete an existing installation or replace a worn cable while maintaining a reference compatible with marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet is part of the Marine Data\/Ethernet Network family. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact Iridium equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, route the cable separately from high-power lines and avoid tight bend radii. Also check the connector type, network category, and usable length between devices before sealing cable passages.\u003c\/p\u003e","brand":"Belden","offers":[{"title":"Default Title","offer_id":53723745911124,"sku":"4195477","price":2.1,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506539032916-1000.jpg?v=1783601182"},{"product_id":"navico-repartiteur-antenne-nspl-500-vhf-ais","title":"NSPL-500 Antenna Splitter","description":"\u003cp\u003eThe Navico NSPL-500 antenna splitter is a compact and lightweight solution designed to allow an AIS transponder and a VHF radio to share a single antenna. This equipment eliminates the need to install a second VHF antenna, saving space, reducing weight and windage, especially on sailboats. Its robust design and performance make it a preferred choice for new installations or refits.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Reliability\u003c\/h3\u003e\n\u003cp\u003eThe NSPL-500 stands out for its very low insertion loss, an essential criterion for not degrading VHF and AIS performance. When transmitting, the loss is typically 1 dB, thus preserving the range of your communications. When receiving, the loss is zero (0 dB), ensuring maximum sensitivity for receiving AIS targets and VHF calls. The splitter incorporates a \"failsafe\" design that gives absolute priority to the VHF radio; in case of power failure to the splitter, the connection of the VHF to the antenna is maintained to ensure safety communications. Its very low power consumption, less than 150 mA at 12 VDC, minimizes the impact on the vessel's power budget.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Integration\u003c\/h3\u003e\n\u003cp\u003eWith dimensions of 152 x 98 x 52 mm and weighing 260 g, the NSPL-500 can be discreetly installed in any technical space. It is compatible with a power supply from 9.6 to 31.2 VDC, thus adapting to 12V and 24V systems. The housing is fully waterproof to IP67 standard, ensuring complete protection against dust and immersion. The device has dedicated connectors for the antenna, VHF radio, AIS transponder (compatible with Class B up to 12.5 W), and even an output for an FM radio receiver. LED indicators allow visualization of the power status and the transmission activity of the VHF and AIS.\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723746337108,"sku":"000-13612-001","price":220.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_79dc0a6e-1c63-4fa7-8a4e-1464ac863f66.jpg?v=1772639627"},{"product_id":"iridium-cable-vehicule-power-harness-20ft","title":"Power Harness 20FT Vehicle Cable","description":"\u003cp\u003e\u003cstrong\u003ePower Harness 20FT Vehicle Cable\u003c\/strong\u003e is a power cable designed for technical connections in marine electronics. It complements an existing installation or replaces a worn cable while maintaining a reference compatible with marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet belongs to the Marine Manufacturer Cables family. Length specified: 20 ft. Signal or protocol: Power. Compatibility must be confirmed with the exact Iridium equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, ensure clean routing without mechanical tension on the connectors. Also verify the manufacturer reference, connector, and required length on board before sealing cable passages.\u003c\/p\u003e","brand":"Iridium","offers":[{"title":"Default Title","offer_id":53723769405780,"sku":"S24597","price":217.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506558693716-1000.jpg?v=1783601369"},{"product_id":"cyclops-cable-antenne-dome-120mm","title":"Dome antenna cable 120mm","description":"\u003cp\u003e\u003cstrong\u003eDome antenna cable 120mm\u003c\/strong\u003e is an antenna cable designed for antenna, coaxial or satellite link functions. It completes an existing installation or replaces a worn cable while maintaining a reference compatible with marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis datasheet is linked to the Antenna \/ coaxial \/ satellite family. Length specified: 120 m. Signal or protocol: RF. Compatibility must be confirmed with the exact Cyclops Marine equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, protect the connections, minimize splices, and maintain a dry service loop. Also check the connector, operating frequency, and acceptable losses over the installed length before sealing cable passages.\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723818426708,"sku":"AC05","price":46.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e97ae20f-9f32-4efc-8090-3aca5216cd09.jpg?v=1779306176"},{"product_id":"cyclops-cable-d-extension-de-10m-pour-antenne-dome","title":"10m extension cable for dome antenna","description":"\u003cp\u003e\u003cstrong\u003e10m extension cable for dome antenna\u003c\/strong\u003e is an antenna cable designed for antenna linking, coaxial or satellite. It complements an existing installation or replaces a worn cable while maintaining a reference suitable for marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet belongs to the Antenna \/ coaxial \/ satellite family. Specified length: 10 m. Signal or protocol: RF. Compatibility must be confirmed with the exact Cyclops Marine equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, protect the connectors, minimize splices, and maintain a dry service loop. Also check the connector, operating frequency, and acceptable losses over the installed length before sealing cable passages.\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723819049300,"sku":"AC07","price":81.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-web-cyclops-cable-family_png.webp?v=1779306608"},{"product_id":"cyclops-cable-d-extension-de-3m-pour-antenne-dome","title":"3m extension cable for dome antenna","description":"\u003cp\u003e\u003cstrong\u003e3m extension cable for dome antenna\u003c\/strong\u003e is an antenna cable designed for antenna linking, coaxial or satellite. It completes an existing installation or replaces a worn cable while maintaining a reference suitable for marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet is linked to the Antenna \/ coaxial \/ satellite family. Indicated length: 3 m. Signal or protocol: RF. Compatibility must be confirmed with the exact Cyclops Marine equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, protect the connectors, limit splices, and maintain a dry service loop. Also check the connector, the operating frequency, and the acceptable losses over the installed length before sealing cable passages.\u003c\/p\u003e","brand":"Cyclops Marine","offers":[{"title":"Default Title","offer_id":53723819213140,"sku":"AC06","price":66.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-web-cyclops-cable-family_png_e5b8197b-998c-443f-a2c9-8fceef9d5b37.webp?v=1779306625"},{"product_id":"ac-antennas-antenne-vhf-marine-celmar0-1-acier-inoxydable","title":"Marine VHF Antenna","description":"\u003cp\u003eThe CELmar0-1 marine VHF antenna from AC Antennas is a robust omnidirectional communication solution designed for demanding maritime environments. Made of stainless steel in a steel-gray color, this one-meter antenna stands out for its reliability and ability to maintain clear communications on the marine VHF band (156.0–162.5 MHz), while also covering DAB frequencies (160–250 MHz) and FM (88–108 MHz). Unlike traditional fiberglass models such as the CX4 series from the same brand, the CELmar0 features a metal whip offering excellent flexibility and minimal wind load for a weight of just 0.36 kg.\u003c\/p\u003e\n\u003ch3\u003eRadiofrequency performance\u003c\/h3\u003e\n\u003cp\u003eDesigned for optimal transmission, the CELmar0-1 operates at a nominal power of 100 watts. It delivers a marine gain of 3 dB (0 dBd) and a Voltage Standing Wave Ratio (VSWR) of less than 1.5:1, ensuring excellent signal efficiency without power loss. Its nominal impedance is 50 ohms with vertical polarization. Note that unlike certain specific models in the range, this antenna is not DC-shorted. Connection to the communication system is made via a standard female UHF socket.\u003c\/p\u003e\n\u003ch3\u003eMechanical design and installation\u003c\/h3\u003e\n\u003cp\u003eBuilt to withstand harsh offshore conditions, this antenna resists extreme winds up to 45 m\/s (101 mph). Certified to IP66 for waterproofing against breaking waves, it remains fully operational across an industrial temperature range from -55 °C to +60 °C. The CELmar0-1 version is supplied with the N163F mounting bracket, enabling immediate integration on board. The antenna base uses a standard 5\/8-inch thread with 24 threads per inch (TPI), ensuring a strong and durable mechanical attachment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e coaxial cable and connectors required for antenna connection are not included.\u003c\/p\u003e","brand":"AC ANTENNAS","offers":[{"title":"Default Title","offer_id":53723828781396,"sku":"AC-CELMAR0-1","price":58.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/antenne-vhf-marine_ac-celmar0-1-2.jpg?v=1776789885"},{"product_id":"ac-antennas-antenne-vhf-marine-celmar1-1-126m-ip66","title":"1.26m Marine VHF Antenna","description":"\u003cp\u003eL'antenne VHF marine CELMAR1-1 d'AC Antennas est une solution omnidirectionnelle de 1,26 mètre conçue pour les communications maritimes fiables. Sa taille compacte la rend idéale pour les voiliers, les bateaux à moteur et les navires de travail où l'espace est restreint, tout en maintenant une excellente qualité de réception et d'émission. Fabriquée au Danemark, elle se positionne comme un standard de robustesse face aux modèles concurrents d'entrée de gamme.\u003c\/p\u003e\n\n\u003ch3\u003ePerformances électriques et transmission\u003c\/h3\u003e\n\u003cp\u003eOpérant sur la plage de fréquences VHF marine de 149.0 à 162.5 MHz, cette antenne offre un gain de 3 dB (0 dBd) et supporte une puissance d'émission maximale de 100 watts. Son impédance nominale est de 50 ohms. Le rapport d'onde stationnaire (VSWR) est strictement maintenu en dessous de 1.5:1 sur l'ensemble de la bande, garantissant une transmission de puissance optimale vers l'émetteur-récepteur. La polarisation verticale et la conception en court-circuit continu (DC-shorted) assurent une protection efficace contre les décharges électrostatiques.\u003c\/p\u003e\n\n\u003ch3\u003eConception mécanique et résistance marine\u003c\/h3\u003e\n\u003cp\u003eConstruite autour d'un fouet en fibre de verre revêtu d'une laque polyuréthane blanche, la CELMAR1-1 résiste durablement aux UV et à l'environnement salin. Elle bénéficie d'une certification d'étanchéité IP66. Conçue pour les conditions extrêmes, elle reste opérationnelle dans une plage de températures allant de -55 °C à +60 °C et résiste à des vents atteignant 45 m\/s (162 km\/h). Pesant seulement 0,38 kg, elle se connecte via une embase standard UHF-femelle, facilitant son intégration sur la majorité des supports marins.\u003c\/p\u003e","brand":"AC Antennas","offers":[{"title":"Default Title","offer_id":53723829600596,"sku":"AC-CELMAR1-1","price":71.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_db160d46-7308-4109-9d2b-20a02378fd03.png?v=1792677686"},{"product_id":"adaptateur-antenne-ad-98fsc","title":"AD-98FSC antenna adapter","description":"\u003ch3\u003eIcom AD-98FSC antenna adapter for marine VHF\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eAD-98FSC\u003c\/strong\u003e antenna adapter developed by \u003cstrong\u003eIcom\u003c\/strong\u003e is a transition connector designed for portable marine transceivers. It allows connecting a handheld VHF, such as the IC-M37E model, to a fixed external ship antenna. This technical modification optimizes radio range by leveraging the device's 6 W RF output power through a mast-mounted installation, an ideal setup for offshore navigation or in case of failure of the main fixed equipment.\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and comparison within the marine radio range\u003c\/h3\u003e\n\u003cp\u003eWithin Icom's accessory catalog, the AD-98FSC meets a specific scalability need and stands out from the AD-92SMA adapter. While the AD-92SMA converts SMA\/BNC specifically for the IC-M73EURO series, the AD-98FSC model is calibrated for the connectivity of the new generation of handheld terminals like the IC-M37E. It temporarily replaces the original flexible antenna (FA-SC59V model) to provide tactical modularity. Unlike generic competitor solutions that may compromise the waterproofing of the high-frequency head, this original adapter preserves signal integrity and ensures a secure connection against ship vibrations.\u003c\/p\u003e\n\n\u003ch3\u003eDeployment specifications\u003c\/h3\u003e\n\u003cp\u003eIdentified by the AD-98FSC reference, this radio communication component is manufactured in Japan according to the brand's robustness standards. It is installed by direct screwing onto the antenna base of the transceiver. Deployment is particularly recommended for marine professionals, SNSM crews, and demanding navigators requiring immediate switching between a standalone portable configuration and a station connected to the ship's coaxial network.\u003c\/p\u003e","brand":"ICOM","offers":[{"title":"Default Title","offer_id":55608295915860,"sku":"AD-98FSC","price":31.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_22c147c2-faad-482b-bc43-c7e1d132099c.png?v=1778018200"},{"product_id":"antenne-flexible-fa-sc59v","title":"FA-SC59V flexible antenna","description":"\u003cp\u003e\n    The \u003cstrong\u003eFA-SC59V\u003c\/strong\u003e flexible antenna by \u003cstrong\u003eIcom\u003c\/strong\u003e is a marine radio communication component designed for portable maritime transceivers. Supplied as standard equipment with the 6 W IC-M37E portable marine VHF, it ensures transmission and reception of radio signals in a nautical environment. Its flexible structure is engineered to absorb mechanical stress, impacts, and torsions inherent to maneuvers aboard vessels, while maintaining the device's buoyancy capabilities.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This antenna is tuned specifically for the standard marine VHF frequency band (156 to 163 MHz), ensuring an optimal standing wave ratio (SWR) for the radio's maximum transmission power. It attaches to the transceiver via an SMA-type connector. The threading and base of the \u003cstrong\u003eFA-SC59V\u003c\/strong\u003e incorporate a compression seal that, once the antenna is screwed onto the chassis, ensures the radio's protection rating is maintained (such as the IP57 standard of the IC-M37E, corresponding to immersion at 1 meter for 30 minutes).\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and comparison within the marine ecosystem\u003c\/h3\u003e\n\u003cp\u003e\n    Within Icom's range, the \u003cstrong\u003eFA-SC59V\u003c\/strong\u003e differs from the FA-S59V model (which equips the IC-M73EURO series). While the FA-S59V offers a wide bandwidth of 150 to 174 MHz suitable for professionals using additional terrestrial channels, the FA-SC59V is strictly optimized for performance in the civil marine band. Compared to using an AD-98FSC adapter (which converts the SMA output to BNC to connect the radio to a fixed mast antenna), this flexible antenna prioritizes mobility and reduced footprint for the user on deck. Compared to generic replacement antennas or competing brands like Standard Horizon or Garmin, this original Icom model guarantees exact mechanical compatibility of the threading, a critical condition for preserving IPX7\/IP57 waterproofing and the \"Float'n Flash\" strobe light activation function in case of immersion.","brand":"ICOM","offers":[{"title":"Default Title","offer_id":55608331239764,"sku":"FA-SC59V","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15380671463764-1000.jpg?v=1783618275"},{"product_id":"icom-cable-antenne-opc-ba9018","title":"OPC-BA9018 antenna cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eICOM OPC-BA9018 antenna cable\u003c\/strong\u003e is a 10-metre connection solution designed for marine installations requiring reliable connectivity between the antenna and fixed VHF equipment or navigation instruments. This RG58-type cable is fitted with a PL male connector at one end and an FME connector at the other.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Adaptability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eOPC-BA9018\u003c\/strong\u003e configuration with a PL male connector and an FME connector offers installation flexibility. The compact FME connector makes it easier to route the cable through conduits or narrow passages before the final connection.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Installation\u003c\/h3\u003e\n\u003cp\u003e\n    To ensure extended compatibility, the \u003cstrong\u003eOPC-BA9018\u003c\/strong\u003e cable is supplied with an additional PL male adapter. This allows the FME connection to be converted into a second PL male connection, providing two PL male connection options or a combination of PL male \/ FME depending on installation requirements. It is suitable for fixed VHF systems and navigation instruments.\n\u003c\/p\u003e","brand":"ICOM","offers":[{"title":"Default Title","offer_id":55718276202836,"sku":"OPC-BA9018","price":32.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_7108db79-4139-4915-b7bc-2ed5b06ea1d1.webp?v=1778019914"},{"product_id":"garmin-antenne-vhf","title":"VHF antenna","description":"\u003cp\u003e\n    The Garmin VHF antenna (010-12998-08) is a component designed for receiving and transmitting radio communication signals. Integrated into the Garmin ecosystem, it ensures clear and reliable connectivity for compatible devices.\n\u003c\/p\u003e\n\u003cp\u003e\n    This antenna is intended to complement existing communication systems, providing a solution to maintain essential connectivity. Its design aligns with Garmin accessories, focused on functional integration and compatibility with various equipment from the brand.\n\u003c\/p\u003e\n\u003cp\u003e\n    For optimal performance, the Garmin VHF antenna 010-12998-08 is engineered to operate within the technical specifications of Garmin radios and receivers, though precise details of its range or specific usage conditions are not provided for this model.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56009466249556,"sku":"010-12998-08","price":19.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_06e6a288-7c3b-4554-a615-139b9dfa1368.jpg?v=1780440000"},{"product_id":"raymarine-a80590-antenne-vhf-ais4000-ais5000","title":"VHF AIS Antenna 4000\/5000 (with mounts)","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine A80590 VHF AIS antenna\u003c\/strong\u003e is designed for Raymarine 4000\/5000 AIS installations. It provides the VHF antenna required for AIS transmission and reception and comes with mounts for clean deck integration.\u003c\/p\u003e\n\u003ch3\u003eMain use\u003c\/h3\u003e\n\u003cp\u003eThis part number covers the antenna and mounts only, not the complete AIS transponder. It is used for new AIS installations, antenna replacements, or upgrades on compatible Raymarine systems.\u003c\/p\u003e\n\u003ch3\u003eInstallation advice\u003c\/h3\u003e\n\u003cp\u003eProper antenna placement and cable routing are critical for AIS range. Verify connector and cable compatibility with your installation before assembly.","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076537626964,"sku":"A80590","price":356.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_1f367c97-0a20-406b-bac2-18d814a87da4.jpg?v=1781129221"},{"product_id":"ac-antennas-kum603-antenne-blu-hf-6m-750w","title":"KUM603 — HF whip antenna (BLU) fiberglass \/ 3 sections - 750W - Length 6m - Tx\/Rx - Cable not included","description":"\u003cp\u003e\n    The AC Antennas \u003cstrong\u003eKUM603\u003c\/strong\u003e is an HF whip antenna, 6 meters long, designed for HF (BLU) communication systems. This three-section antenna has a maximum input power of 750 Watts.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Materials\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eKUM603\u003c\/strong\u003e is made of fiberglass.\n\u003c\/p\u003e\n\u003ch3\u003eEnvironmental Resistance and Electrical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eKUM603\u003c\/strong\u003e supports both transmission and reception (Tx\/Rx). The antenna is designed for mast mounting; mounting accessories such as clamps (e.g., AC-N095F) are not included and must be ordered separately.\n\u003c\/p\u003e","brand":"Ac Antennas","offers":[{"title":"Default Title","offer_id":56090892042580,"sku":"AC-KUM603","price":344.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15503925739860-1000.jpg?v=1783621039"},{"product_id":"ac-antennas-kum803mwm-antenne-blu-hf-fibre-8m-1200w","title":"KUM803MWM - 8 m 1200 W HF SSB Antenna with MWM Bracket","description":"\u003cp\u003e\n    Designed for HF (HF) communications aboard commercial and recreational vessels, the AC Antennas \u003cstrong\u003eKUM803MWM\u003c\/strong\u003e is a 7.88-meter (approximately 8-meter) fiberglass whip antenna. This 3-section omnidirectional antenna is specifically engineered to operate with automatic antenna tuner systems, covering a frequency range of 1.4 to 30 MHz in transmit and receive (Tx\/Rx).\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eKUM803MWM\u003c\/strong\u003e antenna handles a maximum input power of 1200 Watts PEP (Peak Envelope Power), making it suitable for high-power HF transmitters. Its design incorporates copper radiating elements to prevent galvanic corrosion and a crimp construction that enhances structural robustness. The antenna supports a maximum RF voltage of 18 kV, while the included insulator can withstand a maximum voltage of 100 kV over a length of 210 mm. The characteristic impedance is 50 Ohms, with insulation resistance exceeding 10\u003csup\u003e9\u003c\/sup\u003e Ohms and a static capacitance of 100 pF. The polarization is vertical, and the antenna is not DC-shorted.\n\u003c\/p\u003e\n\n\u003ch3\u003eDurability and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Constructed from fiberglass with a white polyurethane lacquer finish, this antenna weighs 8 kg. It is designed to withstand harsh marine environmental conditions, with an operating temperature range of -55°C to +60°C and an IP66 protection rating. The \u003cstrong\u003eKUM803MWM\u003c\/strong\u003e can endure winds of 200 km\/h (44 m\/s) and generates a wind load of 293 N at 160 km\/h. The antenna is supplied with an integrated MWM mounting bracket, compatible with masts of 30 to 100 mm diameter using stainless steel hose clamps. Connection is via a side M8x1.25 bolt. The AC Antennas KUM803MWM has been established in the market for over five decades, attesting to its reliability.\n\u003c\/p\u003e","brand":"Ac Antennas","offers":[{"title":"Default Title","offer_id":56090909671764,"sku":"AC-KUM803MWM","price":674.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15503928656212-1000.jpg?v=1783621044"},{"product_id":"glomex-antenne-ais-1db-cable-9m-support","title":"AIS antenna 1 dB with 9 m coaxial cable and mounting bracket","description":"\u003cp\u003e\n    Designed specifically for Automatic Identification System (AIS) applications, the \u003cstrong\u003eGlomex RA111AIS\u003c\/strong\u003e antenna is a compact solution for receiving and transmitting AIS signals. With a gain of 1 dB, this antenna is precisely tuned for AIS frequencies from 161.975 to 162.025 MHz, ensuring optimal performance for maritime safety and situational awareness.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGlomex RA111AIS\u003c\/strong\u003e antenna features a compact size of 140 mm and a weight of 220 g, allowing discreet installation even in confined spaces. Its construction includes an antenna element encapsulated in a conical rubber tube, providing flexibility and resistance to shocks and marine conditions. The impedance is 50 ohms and the VSWR (Voltage Standing Wave Ratio) is less than or equal to 1.2 at 162 MHz, with a maximum input power of 50 W.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGlomex RA111AIS\u003c\/strong\u003e comes with a 9-meter coaxial cable, facilitating connection to AIS equipment. A polished stainless steel mounting bracket is included, designed for vertical or horizontal installation on rails and balconies with diameters from 22 mm to 30 mm. The package also includes a BNC connector for AIS receivers\/transponders, a PL259 connector for the antenna, and a rubber protector for the latter, simplifying the installation process.\n\u003c\/p\u003e","brand":"Glomex","offers":[{"title":"Default Title","offer_id":56098574205268,"sku":"GL-RA111AIS","price":100.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15507199492436-1000.jpg?v=1783605617"},{"product_id":"garmin-antenne-gsm-externe-cortex-gpa680","title":"Cortex® GPA680 external GSM antenna","description":"\u003cp\u003e\n    Designed to enhance cellular connectivity at sea, the \u003cstrong\u003eGarmin Cortex GPA680 external GSM antenna\u003c\/strong\u003e (part number 010-13266-20) is an accessory for Garmin Cortex M1\/V1 systems. It extends the cellular signal range of your Cortex Hub, which is critical for remote monitoring and communication functions.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    This antenna comes with a 5-metre (16-foot) Cortex cellular antenna patch cable. The cable features an SMA male connector on the antenna side and an SMA female connector for connection to the Cortex Hub. This cable length provides flexibility for positioning the antenna on the boat.\n\u003c\/p\u003e\n\u003ch3\u003eMounting Options\u003c\/h3\u003e\n\u003cp\u003e\n    The Garmin Cortex GPA680 antenna includes mounting hardware for various installation setups. It can be mounted on deck, flush-mounted, or attached to a vertical surface, making it adaptable to different vessel types. As an original Garmin product, it ensures compatibility and seamless integration with Cortex M1\/V1 systems.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56137475555668,"sku":"010-13266-20","price":92.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_6e4743a9-2d0c-436b-b763-4d9b78b1ede4.jpg?v=1781653205"},{"product_id":"garmin-antenne-wi-fi-externe-cortex","title":"Garmin Cortex external Wi-Fi antenna","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin Cortex external Wi-Fi antenna\u003c\/strong\u003e (part number 010-13266-30) is designed to extend the Wi-Fi capabilities of Garmin Cortex M1 and V1 hubs. Operating on the 2.4 GHz frequency band, it ensures improved connectivity for your marine communication system.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This antenna uses a standard RP-SMA connector, allowing a direct connection to the \"Wi-Fi\" port of the Cortex Hub. Its design is optimized for specific integration with Cortex M1 and V1 models, ensuring compatibility and adequate performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and optimization\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the antenna is straightforward: it screws directly into the dedicated port on the Cortex Hub. To maximize Wi-Fi range and performance, it is recommended to position the antenna vertically. It is also advisable to avoid installing it near potential interference sources such as radars, HF antennas, high-power satellite communication systems, or other electronic equipment. While the Cortex Hub has an internal Wi-Fi antenna, adding this external antenna can be beneficial for installations requiring extended range or to compensate for obstacles. RP-SMA extension cables, less than 2 meters in length, can be used for optimal positioning.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56137477488980,"sku":"010-13266-30","price":17.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_b5b693ff-b5f5-4cc7-81df-804913c77c09.jpg?v=1781653224"},{"product_id":"navico-antenne-vhf-quick-fit-2-5m-fibre-verre","title":"Quick-Fit white fiberglass VHF antenna 2.5 m (8 ft)","description":"\u003cp\u003e\n    Designed for marine navigation, the \u003cstrong\u003eNavico Quick-Fit 2.5 m (8 ft) VHF antenna\u003c\/strong\u003e in fiberglass provides a reliable communication solution and simplified installation. This white antenna, made of Ultraglass, ensures stable VHF reception thanks to its 6 dB gain.\n\u003c\/p\u003e\n\n\u003ch3\u003eInnovative Quick-Fit Design\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNavico Quick-Fit antenna\u003c\/strong\u003e stands out with its modular two-part design that can be interchanged. This feature allows for quick replacement or removal of the antenna without cutting or handling the cable. The cable is directly connected to the antenna mounting base, simplifying maintenance and replacement of the radiating element.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Installation is simplified thanks to the Fast-Fit cable connector, which reduces the size of the hole needed in bulkheads. The antenna is compatible with various mounting systems, whether in stainless steel or nylon. It integrates with marine systems from brands B\u0026G, Lowrance, and Simrad, offering flexibility across different platforms.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56143113421140,"sku":"AA000355","price":95.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/navico-aa000355-antenne-vhf-quick-fit-blanche-2-5m.jpg?v=1781790928"},{"product_id":"navico-antenne-vhf-quick-fit-1m-fibre-verre-quick-fit","title":"Quick-Fit white fiberglass VHF antenna 1 m (3.3 ft)","description":"\u003cp\u003e\n    The \u003cstrong\u003eNavico 1m (3.3-ft) White Fiberglass Quick-Fit VHF Antenna\u003c\/strong\u003e (reference AA000358) is designed for marine communications. Measuring 1 meter (3.3 ft) in length, it is made of white Ultraglass fiberglass, providing a 3dB gain.\n\u003c\/p\u003e\n\n\u003ch3\u003eQuick-Fit system and installation\u003c\/h3\u003e\n\u003cp\u003e\n    This antenna features a Quick-Fit system for quick removal without disconnecting the cable. The cable is directly wired to the mount, not the antenna, simplifying removal or replacement without modifying existing wiring. Installation is made easier by a FastFit cable connector, allowing smaller holes to be drilled through bulkheads for the 5-meter cable.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The antenna is compatible with stainless steel and nylon mounts, offering flexible mounting options. It comes with a 5-meter cable and integrated FastFit plugs, ensuring immediate connectivity to marine VHF systems.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56144136765780,"sku":"AA000358","price":52.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/navico-1m-3-3-ft-white-fiberglass-quick-fit-vhf-antenna_AA000358-01.jpg?v=1781708204"},{"product_id":"navicom-antenne-vhf-ah-031-rechange","title":"Antenna for VHF RT311","description":"\u003cp\u003e\n    The Navicom AH-031 antenna is specifically designed as a replacement part for the brand’s portable VHF radios. It maintains the transmission and reception capabilities of your maritime communication equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Functionality\u003c\/h3\u003e\n\u003cp\u003e\n    This AH-031 replacement antenna is compatible with several Navicom portable VHF models. It is notably suited for the RT 311, RT 212, RT 211, and RT211C models. Using an original antenna ensures perfect integration and radio performance compliant with the initial specifications of these devices.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The Navicom AH-031 antenna is designed for direct and easy replacement. Its design allows for quick installation, restoring the VHF’s functionality without requiring tools or specific technical skills. It is an essential component for the reliability of your communications at sea.\n\u003c\/p\u003e","brand":"Navicom","offers":[{"title":"Default Title","offer_id":57645738885460,"sku":"AH-031","price":19.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/e6g6zxzv_AH-031-AH-031-official.png?v=1792142609"},{"product_id":"amec-cubo-162-splitter-antenne-vhf-ais-sans-perte","title":"CUBO-162: VHF\/AIS Antenna Splitter with No Loss","description":"\u003cp\u003e\n    The AMEC CUBO-162 antenna splitter is designed to optimize the installation of your marine communication and safety equipment. It allows sharing a single VHF antenna between your VHF radio, AIS transponder, and FM radio, reducing clutter and wiring complexity aboard. This device ensures smooth signal integration across the frequency range from 156.025 MHz to 162.025 MHz.\n\u003c\/p\u003e\n\n\u003ch3\u003eRF Performance and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The CUBO-162 stands out for its minimal insertion losses, with a typical loss of 0 dB on AIS and VHF radio reception paths, and a typical loss of 1 dB on transmission paths. It is compatible with 12V to 24V DC power, consuming 100mA in reception and 150mA in transmission at 12VDC. The AIS port is BNC type and supports up to 12.5W (50Ω), while the VHF radio port is SO-239 type for powers up to 25W (50Ω). An SO-239 antenna port is also integrated, and the FM radio connection is made via a cable with a Motorola plug.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    With compact dimensions of 128 mm (width), 36 mm (height), and 88 mm (depth, without connectors), and a weight of 230 g, the AMEC CUBO-162 fits easily into various marine environments. It is equipped with several LED indicators: a green LED for power, a red LED for errors (antenna issue or VHF transmission \u003e 25W), and two distinct green LEDs for AIS and VHF radio transmissions. Its water resistance complies with IPX2 standards, and it operates within a temperature range of -15°C to 55°C, with an operational humidity of 95% RH at 40°C. The device is certified CE, RED 2014\/53\/EU, IEC 60945, and EN 62368-1.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cp\u003e\n    It is imperative to connect the CUBO-162 to a suitable VHF antenna before powering it on. To optimize performance and minimize exposure to RF energy, the antenna should be mounted at least 3 meters away from the device. The splitter can be installed on a flat surface or bulkhead using the four provided screws.\n\u003c\/p\u003e","brand":"AMEC","offers":[{"title":"Default Title","offer_id":57646038155604,"sku":"MCT-AMEC-C162","price":275.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/616hl7o9_MCT-AMEC-C162-MCT-AMEC-C162-official.png?v=1792143719"},{"product_id":"em-trak-s300-splitter-antenne-vhf-ais","title":"S300: Splitter for VHF\/AIS Antenna with no loss","description":null,"brand":"EM-Trak","offers":[{"title":"Default Title","offer_id":57648390472020,"sku":"MCT-EMTR-S300","price":319.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/jbw3voqn_MCT-EMTR-S300-MCT-EMTR-S300-official.jpg?v=1792155556"},{"product_id":"connecteur-pl259-male-cable-rg213","title":"PL-259 male connector for RG-213 cable (PL259\/10)","description":"\u003cp\u003e\n    The Banten BA-PL259\/10 PL-259 male connector is designed to establish a reliable and standardized connection in marine communication systems. This connector is specifically adapted for use with RG-213 coaxial cables.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and use\u003c\/h3\u003e\n\u003cp\u003e\n    This PL-259 male connector is intended for terminating RG-213 cables, ensuring the interface between the cable and various radiofrequency equipment or marine antennas. Its design guarantees compliance with standards for installations requiring this type of connection.\n\u003c\/p\u003e","brand":"Navicom","offers":[{"title":"Default Title","offer_id":57651459424596,"sku":"BA-PL259\/10","price":2.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lyh35skq_BA-PL259-10-BA-PL259-10-official.jpg?v=1792166378"},{"product_id":"cable-vhf-b9vhf","title":"B9VHF: VHF cable for B900, S100, S300","description":"\u003cp\u003e\n    The B9VHF VHF cable is designed to ensure essential connectivity between your VHF antenna system and a compatible device. This component is indispensable for maintaining optimal transmission and reception of VHF signals.\n\u003c\/p\u003e\n\u003ch3\u003eReliable Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is a VHF cable. Its role is to maintain signal integrity between the antenna and the connected device, a critical factor for communication performance.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    Using a VHF cable such as the B9VHF contributes to compliant and reliable installation. It ensures that the electrical characteristics required for effective VHF transmission are met, thereby avoiding signal loss.\n\u003c\/p\u003e","brand":"EM-Trak","offers":[{"title":"Default Title","offer_id":57651563528532,"sku":"MCT-EMTR-B9VF","price":29.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/srpc4h2g_MCT-EMTR-B9VF-MCT-EMTR-B9VF-official.jpg?v=1792166822"},{"product_id":"standard-horizon-sma-bnc-connecteur","title":"SMA\/BNC connector","description":"\u003cp\u003e\n    The reference document provided for SKU STH-CN3 describes the user manual for the Standard Horizon HX300E portable VHF radio. Information regarding an SMA\/BNC connector cannot be validated by the admissible source.\n\u003c\/p\u003e\n\u003ch3\u003eInterface functionality\u003c\/h3\u003e\n\u003cp\u003e\n    The reference document provided contains no information on a connector or adapter. Therefore, this functionality description cannot be validated by the admissible source.\n\u003c\/p\u003e","brand":"Standard Horizon","offers":[{"title":"Default Title","offer_id":57651867484500,"sku":"STH-CN3","price":15.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/92rfcj73_STH-CN3-STH-CN3-official.jpg?v=1792167288"},{"product_id":"standard-horizon-antenne-vhf-portable-rechange-hx","title":"Spare VHF antenna for any HX\/RT320\/RT330 series portable VHF","description":"\u003cp\u003e\n    Specifically designed for Standard Horizon portable VHF radios, the \u003cstrong\u003eSTH-CAT460\u003c\/strong\u003e replacement antenna is a critical component for maintaining the performance of your marine communication equipment. This antenna ensures optimal transmission and reception, essential for safety and efficiency at sea.\n\u003c\/p\u003e\n\n\u003ch3\u003eExtended compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSTH-CAT460\u003c\/strong\u003e antenna is compatible with a wide range of Standard Horizon portable VHF models, including the HX series. Its seamless integration guarantees compliance with your transceiver’s original specifications, preserving its range and communication clarity.\n\u003c\/p\u003e\n\n\u003ch3\u003eStandard Horizon quality\u003c\/h3\u003e\n\u003cp\u003e\n    As an original replacement part, the \u003cstrong\u003eSTH-CAT460\u003c\/strong\u003e antenna benefits from Standard Horizon’s manufacturing quality. It is engineered to withstand marine environments, ensuring long-term durability and reliability critical for offshore use.\n\u003c\/p\u003e","brand":"Standard Horizon","offers":[{"title":"Default Title","offer_id":57769458041172,"sku":"STH-CAT460","price":12.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/4e8ca031_STH-CAT460-CAT460-official.jpg?v=1792621716"},{"product_id":"antenne-vhf-rechange-sth-sra-19b","title":"Spare VHF antenna for HX320E","description":"\u003cp\u003e\n    The STH-SRA-19B spare VHF antenna is a replacement component designed to substitute for an existing antenna. It is engineered for integration into compatible communication systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eFunctionality and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This antenna is a spare part. It is designed for VHF signal reception and transmission. Its installation is intended for seamless integration with compatible equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration\u003c\/h3\u003e\n\u003cp\u003e\n    Using a spare antenna is a critical factor in maintaining the integrity of a communication system. It ensures continuity of transmission and reception operations.\n\u003c\/p\u003e","brand":"Standard Horizon","offers":[{"title":"Default Title","offer_id":57769482027348,"sku":"STH-SRA-19B","price":12.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/17e44122_STH-SRA-19B-SRA-19B-official.jpg?v=1792621875"},{"product_id":"navicom-antenne-vhf-rechange-ah420","title":"Spare VHF antenna for RT411, RT440, RT420, RT420 DSC and RT430","description":"\u003cp\u003e\n    The Navicom AH420 spare VHF antenna is a dedicated component for restoring communication capabilities of Navicom handheld VHF radios. It ensures reception and transmission compliant with original specifications, essential for safety at sea and reliable exchanges. Its design allows direct replacement, keeping the equipment operational.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility with Navicom handheld VHF radios\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAH420\u003c\/strong\u003e antenna is designed for specific compatibility with several Navicom handheld VHF radio models. It integrates with the RT420 DSC MAX, RT420 MAX, RT440, RT 411 +, RT 430 BT, RT 420 DSC and RT 420 models. This compatibility ensures optimal radio operation, preserving range and communication clarity.\n\u003c\/p\u003e\n\n\u003ch3\u003eMaintaining communication performance\u003c\/h3\u003e\n\u003cp\u003e\n    As an original spare antenna, the \u003cstrong\u003eAH420\u003c\/strong\u003e is manufactured to Navicom quality standards. Its role is to replace a damaged or worn antenna, thus avoiding any degradation of VHF radio performance, particularly in terms of range and signal quality. Using a compliant antenna is crucial for the reliability of your marine communication equipment.\n\u003c\/p\u003e","brand":"Navicom","offers":[{"title":"Default Title","offer_id":57778978292052,"sku":"AH420","price":15.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/e3a6426f_AH420-AH420-official.png?v=1792654507"},{"product_id":"navicom-adaptateur-ay420-antenne-vhf-radio-portable","title":"Adapter for RT420, RT420DSC, RT430BT for external antenna connection","description":"\u003cp\u003e\n    The Navicom AY420 adapter is designed to extend the communication capabilities of several Navicom handheld VHF models. It allows connecting an external fixed VHF antenna to your handheld radio, thereby enhancing its range and reception potential.\n\u003c\/p\u003e\n\n\u003ch3\u003eExtended compatibility for your Navicom handheld VHF radios\u003c\/h3\u003e\n\u003cp\u003e\n    This adapter is compatible with a wide range of Navicom handheld VHF radios, including the \u003cstrong\u003eRT420, RT420 DSC, RT420 MAX, RT420 DSC MAX, RT430 BT, RT440 and RT 411+\u003c\/strong\u003e models. It provides a simple solution to improve the communication performance of these devices at sea or at the dock, by enabling them to benefit from the power and stability of an external antenna.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified installation and improved range\u003c\/h3\u003e\n\u003cp\u003e\n    The AY420 adapter facilitates the integration of your Navicom handheld VHF into a more complete marine radio setup. By using an external fixed antenna, users can expect a significant improvement in transmission range and reception quality, essential for safety and communication at sea. This accessory is particularly useful for boats where a fixed VHF is not installed, or as a backup solution for a primary handheld VHF.\n\u003c\/p\u003e","brand":"Navicom","offers":[{"title":"Default Title","offer_id":57778985402708,"sku":"AY420","price":11.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/080114ed_AY420-AY420-official.png?v=1792654526"},{"product_id":"raccord-femelle-femelle-pl259","title":"Female\/female adapter for PL-259","description":null,"brand":"Navicom","offers":[{"title":"Default Title","offer_id":57778991071572,"sku":"BA-PL258","price":2.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/33301a6d_BA-PL258-BA-PL258-official.png?v=1792654547"},{"product_id":"ac-antennas-celmar2-1-antenne-vhf-fibre","title":"CELmar2-1 - VHF fiber antenna 1.04 m with 6 m cable","description":"\u003cp\u003e\n    Designed for marine and terrestrial communication, the VHF fiber \u003cstrong\u003eAC ANTENNAS CELmar2-1\u003c\/strong\u003e antenna delivers stable performance across VHF, FM, and DAB bands. This coaxial dipole antenna covers a frequency range of 156.0–162.5 MHz for VHF, with reception capabilities for FM (88–108 MHz) and DAB (160–250 MHz).\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    With a maximum input power of 100 Watts for VHF, the CELmar2-1 model features a gain of 0 dBd (2.15 dBi or 3 Marine dB). Its VSWR is less than 1.5:1, ensuring a 50 Ohm impedance match. The antenna measures 1.04 meters in length and weighs 0.60 kg (or 0.52 kg depending on the source). It operates within a temperature range of -40 to +60 °C and has IP66 protection against water and dust intrusion.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and materials\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAC ANTENNAS CELmar2-1\u003c\/strong\u003e is constructed from fiberglass with radiating elements in copper. It incorporates a crimping technology that strengthens its structure. The vertically polarized design and the absence of DC short circuits or grounding contribute to its reliability. The thread type is 1\"-14TPI female. The antenna can withstand winds up to 200 km\/h. It is supplied with 6 meters of RG58C\/U cable.\n\u003c\/p\u003e","brand":"AC Antennas","offers":[{"title":"Default Title","offer_id":57792059015508,"sku":"AC-CELmar2-1","price":63.97,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/ac-antennas-celmar2-1-antenne-vhf-fibre-156162mhz-3db-100w-longueur-104m-livre-avec-6m-de-cable-rg58-1.jpg?v=1792677529"},{"product_id":"ac-antennas-celmar2-2-antenne-vhf-fibre-156-162mhz-3db-100w-1m04-18m-cable","title":"CELmar2-2 - Marine VHF fiber antenna 1.04 m with 18 m cable","description":"\u003cp\u003e\n    Designed for reliable marine communications, the \u003cstrong\u003eAC Antennas CELmar2-2\u003c\/strong\u003e fiber VHF antenna operates over a wide frequency band from 156.0 to 162.5 MHz for VHF, 88 to 108 MHz for FM, and 160 to 250 MHz for DAB. It delivers a gain of 0 dBd (3 Marine dB) for omnidirectional performance and supports a maximum input power of 100 Watts in the VHF band.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications of the AC Antennas CELmar2-2\u003c\/h3\u003e\n\u003cp\u003e\n    With a nominal impedance of 50 Ohms and a VSWR below 1.5:1 across the VHF band, this antenna ensures stable signal transmission. Its polarization is vertical. The \u003cstrong\u003eCELmar2-2\u003c\/strong\u003e has a length of 1.04 meters (3.4 feet) and weighs approximately 1.05 kg. It is manufactured from high-quality fiberglass with copper radiating elements for resistance to galvanic corrosion and marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The antenna comes with 18 meters of pre-installed RG58C\/U coaxial cable. It mounts via a 1\"-14 TPI female ferrule, compatible with standard marine antenna mounts (mount not included). IP66 certified, it is protected against dust and powerful water jets. Its operating temperature range is from -40°C to +60°C, and it is designed to withstand winds up to 55 m\/s (124 mph), ensuring versatile use on commercial vessels, pleasure craft, or coastal installations.\n\u003c\/p\u003e","brand":"AC Antennas","offers":[{"title":"Default Title","offer_id":57792257589588,"sku":"AC-CELmar2-2","price":85.93,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/ac-antennas-celmar2-2-antenne-vhf-fibre-156162mhz-3db-100w-longueur-104m-livre-avec-18m-de-cable-rg5-1.png?v=1792677924"},{"product_id":"ac-antennas-celmar3-10-antenne-vhf-fibre-6db-2-70m","title":"CELmar3-10 - Fiber VHF antenna 2.70 m with 6 m cable","description":"\u003cp\u003e\n    Designed for marine communication, the fiber VHF antenna \u003cstrong\u003eAC ANTENNAS CELmar3-10\u003c\/strong\u003e provides a reliable communication solution. It covers marine VHF frequencies (156.0-162.5 MHz), FM (88-108 MHz), and DAB (160-250 MHz), with a maximum power of 100 W for the VHF band. This lightweight omnidirectional antenna features a gain of 3 dBd (5.15 dBi), ensuring extended communication range.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and durability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCELmar3-10\u003c\/strong\u003e antenna measures 2.70 meters in length and weighs 0.90 kg. Its fiberglass construction with brass radiating elements protects against galvanic corrosion. The crimping technology used in its manufacturing enhances robustness. It is designed to withstand demanding marine conditions, with an IP66 protection rating and wind resistance up to 55 m\/s (124 mph). Its operating temperature range is from -40 to +60 °C.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and performance\u003c\/h3\u003e\n\u003cp\u003e\n    With a nominal impedance of 50 Ohm and a VSWR below 1.5:1 for the VHF band, this antenna ensures efficient signal transmission. It comes with a 6-meter RG58C\/U cable. The mounting base features a 1\" 14TPI female ferrule, allowing direct installation on compatible AC Antennas threaded mounts (mount not included; the N285F 2-axis swivel is an optional accessory). The \u003cstrong\u003eCELmar3-10\u003c\/strong\u003e stands out from shorter models like the AC-CELmar4 (1.26 m, 3 dBd) due to its length, optimizing communication range.\n\u003c\/p\u003e","brand":"AC Antennas","offers":[{"title":"Default Title","offer_id":57792270958932,"sku":"AC-CELmar3-10","price":130.33,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/ac-antennas-celmar3-10-antenne-vhf-fibre-156162mhz-6db-100w-longueur-270m-livree-avec-6m-de-cable-rg-1.jpg?v=1792677961"},{"product_id":"ac-antennas-celmar4-antenne-dipolaire-coaxiale-vhf-fibre","title":"CELmar4 - VHF dipole antenna 1.26 m with 18 m cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eAC Antennas CELmar4\u003c\/strong\u003e is a coaxial VHF dipole antenna designed for marine and terrestrial communication, featuring a robust fiberglass construction. It operates over a VHF frequency range of 146.0 to 162.5 MHz (band A), providing a gain of 3 dB (2.15 dBi or 3 Marine dB) and supporting a maximum input power of 100 Watts. Its nominal impedance is 50 Ohms with a VSWR below 1.5:1 on band A, ensuring efficient transmission.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Environmental Resistance\u003c\/h3\u003e\n\u003cp\u003e\n    At 1.26 meters in length and weighing 1.25 kg, the CELmar4 incorporates copper radiating elements and a chrome-plated brass ferrule, engineered to prevent galvanic corrosion. Its construction uses a crimping technology that, according to the manufacturer, makes it 4 to 5 times more resistant. The antenna is rated IP66 for protection against water and dust and can operate within a temperature range of -55 to +60 °C. It is designed to withstand winds up to 200 km\/h, with a wind load of 28 N at 160 km\/h, attesting to its robustness in harsh marine conditions.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The CELmar4 antenna is omnidirectional and features a standard 1\"-14TPI female thread for mounting. It comes supplied with 18 meters of RG58 cable. Beyond its VHF transmission capabilities, it can also receive on FM (88-108 MHz) and 160-250 MHz bands, expanding its reception functionality. Its single-section design simplifies installation.\n\u003c\/p\u003e","brand":"AC Antennas","offers":[{"title":"Default Title","offer_id":57792285049172,"sku":"AC-CELmar4","price":105.94,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/ac-antennas-celmar4-antenne-dipolaire-coaxiale-vhf-fibre-156162mhz-3db-100w-longueur-126-m-livre-ave-1.jpg?v=1792678001"},{"product_id":"ac-antennas-cx3-5-8-antenne-vhf-fibre-marine-6db-150w","title":"CX3-5\/8 - VHF fiber antenna 2.63 m 6 dB","description":"\u003cp\u003e\n    Designed for demanding maritime communications, the \u003cstrong\u003eAC Antennas CX3-5\/8\u003c\/strong\u003e VHF fiber antenna is a robust omnidirectional solution for commercial vessels, fishing boats, and large recreational craft. It provides reliable VHF communication across the frequency range of 156.0 to 162.5 MHz, with a bandwidth of 6.5 MHz.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Performance and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAC Antennas CX3-5\/8\u003c\/strong\u003e antenna delivers a gain of 3 dBd (5.15 dBi or 6 dB marine gain) and supports a maximum input power of 150 W, with a nominal impedance of 50 Ohm and a VSWR below 1.5:1. It features vertical polarization and is DC-shorted\/grounded for electrostatic discharge protection. The connector is a female UHF type.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Marine-Grade Design\u003c\/h3\u003e\n\u003cp\u003e\n    Constructed with corrosion-resistant materials, including brass radiating elements, this antenna prevents galvanic corrosion. Its fiber construction, reinforced by AC Antennas’ crimping technology, ensures mechanical durability suited for extreme marine conditions. It withstands winds up to 200 km\/h and operates within a temperature range of -40°C to +60°C. At 2.63 m in length, it features IP68 protection. Installation is simplified by a dual threading system (1″ 14TPI male and ISO 228\/1-G1 female), enabling versatile mounting. It is also recommended for AIS solutions.\n\u003c\/p\u003e","brand":"AC Antennas","offers":[{"title":"Default Title","offer_id":57792299827540,"sku":"AC-CX3-5\/8","price":171.55,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/ac-antennas-cx3-58-antenne-vhf-fibre-1561625mhz-6db-100w-longueur-263m-livree-avec-support-de-cabl_a-1.jpg?v=1792678030"},{"product_id":"glomex-rallonge-antenne-inox-150mm-gps-vhf","title":"Stainless steel 150mm antenna extension (GPS\/VHF antenna)","description":"\u003cp\u003e\n    Designed to optimize marine signal reception, the \u003cstrong\u003eGlomex GL-RA103\/15\u003c\/strong\u003e antenna extension is an essential accessory for enhancing the performance of your communication and navigation equipment. Made from electropolished marine-grade stainless steel, this 150 mm extension features a standard 1\" x 14 thread at both ends (male and female), ensuring universal compatibility with most Glomex antennas and marine mounts, as well as a wide range of other brands using this industrial thread specification.\n\u003c\/p\u003e\n\n\u003ch3\u003eSignal performance optimization\u003c\/h3\u003e\n\u003cp\u003e\n    By raising the antenna by 150 mm, the \u003cstrong\u003eGlomex GL-RA103\/15\u003c\/strong\u003e clears the line of sight from common onboard obstructions such as radar arches, biminis, flybridges, or solar panels. This elevation significantly improves the range and clarity of communication signals for VHF, AIS, GPS, CB, and AM\/FM systems, ensuring more reliable connections.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust design and simplified installation\u003c\/h3\u003e\n\u003cp\u003e\n    The robust stainless steel construction of this extension provides resistance to rust, corrosion, saltwater, and UV rays, ensuring long-term durability in demanding marine environments. Its electropolished finish also delivers a professional marine aesthetic, blending seamlessly with other stainless steel deck equipment. Installation is straightforward, as the extension screws easily between the antenna and its mount without requiring specialized tools or complex modifications.\n\u003c\/p\u003e","brand":"Glomex","offers":[{"title":"Default Title","offer_id":57792503775572,"sku":"GL-RA103\/15","price":61.72,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/glomex-rallonge-ant-inox-150mm-antgps-vhf_gl-ra10315-1.jpg?v=1792678483"},{"product_id":"glomex-rallonge-antenne-aluminium-nylon-100mm-vhf-gps","title":"White 100mm front antenna extension alu\/plastic (GPS\/VHF antenna)","description":"\u003cp\u003e\n    Designed to optimize the range of your communication and navigation equipment, the \u003cstrong\u003eGlomex GL-RA147EXT\u003c\/strong\u003e antenna extension provides a 100 mm (4 inch) elevation solution for your VHF and GPS antennas. This extension improves the line of sight of the antennas, essential for optimal signal reception and transmission at sea.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Materials\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGlomex GL-RA147EXT\u003c\/strong\u003e is made from white lacquered aluminum for the extension itself and UV-resistant nylon for the associated bases, ensuring resistance to marine conditions. This combination of materials gives the product durability against UV rays, saltwater, and extreme weather variations, preventing degradation and embrittlement. Its discreet white design blends with the aesthetics of vessels.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This extension features a standard 1\"x14 threading, ensuring broad compatibility with a variety of VHF and GPS antennas. For installations on articulated bases, it fits tubes with a diameter of Ø 22\/25 mm. The locking mechanism with a knurled nut ensures secure and stable antenna mounting, minimizing vibrations during navigation. The design allows for cable routing, facilitating integration and cable management on deck.\n\u003c\/p\u003e","brand":"Glomex","offers":[{"title":"Default Title","offer_id":57792526287188,"sku":"GL-RA147EXT","price":29.17,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/glomex-rallonge-ant-aluplast-blanche-100mm-antgps-vhf_gl-ra147ext-1.jpg?v=1792678517"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/antenne-vhf-ais.png?v=1774465137","url":"https:\/\/skysat.fr\/en-bh\/collections\/vhf-ais-antenna.oembed","provider":"Skysat","version":"1.0","type":"link"}