{"title":"Sleeving and Protection","description":"\u003cp\u003eHeat shrink tubing, protective sleeving, and sleeves for onboard electrical wiring.\u003c\/p\u003e","products":[{"product_id":"te-connectivity-gaine-thermo-colle-3-1-40mm-protection-cable","title":"Heat shrink tubing with 3:1 adhesive; 40mm; L: 1.2m black","description":"\u003cp\u003eGaine thermorétractable à double paroi TE Connectivity Raychem ATUM, en polyoléfine réticulée par irradiation, avec paroi interne thermofusible. Diamètre 40 mm avant retreint, 13 mm après, rapport 3:1, longueur 1,2 m.\u003c\/p\u003e\n\n\u003ch3\u003eCe que fait la paroi interne\u003c\/h3\u003e\n\u003cp\u003eSous l'effet de la chaleur, la paroi externe se rétracte pendant que la paroi interne fond et flue. En refroidissant, elle solidarise la gaine et le support. Le résultat est un joint continu, sans point d'entrée pour l'humidité, là où une gaine simple paroi ne fait que serrer mécaniquement. L'adhésif prend sur le PVC, le polyéthylène, les caoutchoucs et l'aluminium.\u003c\/p\u003e\n\n\u003ch3\u003eTempératures de pose\u003c\/h3\u003e\n\u003cp\u003eLe retreint commence vers 80 °C, mais le recouvrement complet demande \u003cstrong\u003e125 °C\u003c\/strong\u003e. C'est la valeur à viser au décapeur : chauffer seulement jusqu'à 110 °C donne un retreint partiel et un collage incomplet. Une fois posée, la gaine tient en service continu de −55 °C à +110 °C.\u003c\/p\u003e\n\n\u003ch3\u003eCaractéristiques\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRapport de retreint : 3:1\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur fourni (expansé) : 40 mm\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur après retreint libre : 13 mm\u003c\/li\u003e\n  \u003cli\u003eÉpaisseur de paroi après retreint : 2,54 ± 0,55 mm, dont 1,00 mm de paroi thermofusible\u003c\/li\u003e\n  \u003cli\u003eLongueur : 1,2 m (conditionnement standard TE de 4 pieds)\u003c\/li\u003e\n  \u003cli\u003eMatière : polyoléfine réticulée par irradiation, paroi interne thermofusible\u003c\/li\u003e\n  \u003cli\u003eCouleur : noir\u003c\/li\u003e\n  \u003cli\u003eDébut de retreint : 80 °C — recouvrement complet : 125 °C\u003c\/li\u003e\n  \u003cli\u003eService continu : −55 °C à +110 °C\u003c\/li\u003e\n  \u003cli\u003eRigidité diélectrique : 300 V\/mil minimum\u003c\/li\u003e\n  \u003cli\u003eAbsorption d'eau : 0,5 % maximum (24 h à 23 °C)\u003c\/li\u003e\n  \u003cli\u003ePoids : 157,4 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpécifications et agréments\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRaychem RW-2063 (noir)\u003c\/li\u003e\n  \u003cli\u003eAMS-DTL-23053\/4, classe 3\u003c\/li\u003e\n  \u003cli\u003eUL E85381, 110 °C \/ 600 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCe que la fiche technique ne dit pas\u003c\/h3\u003e\n\u003cp\u003eTE qualifie la tenue aux fluides sur gazole, fluide hydraulique et huile de lubrification, 24 h à 23 °C. Aucune donnée de tenue aux UV n'est publiée pour cette gamme : en pont exposé, considérer la gaine comme un joint et non comme une protection de surface durable. La référence est produite en noir ; les autres teintes existent chez TE mais sur commande spéciale, pas sur stock.\u003c\/p\u003e","brand":"TE Connectivity","offers":[{"title":"Default Title","offer_id":53723831468372,"sku":"ATUM-40\/13-0-STK","price":57.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/product-high-res_72736a88-bda7-4383-aeba-fc75dadbf7e3.jpg?v=1787068734"},{"product_id":"te-connectivity-gaine-thermoretractable-colle-4-1-12mm-noir","title":"Heat shrink tubing with 4:1 adhesive; 12mm; L: 1.2m black","description":"\u003cp\u003eGaine thermorétractable à double paroi TE Connectivity Raychem ATUM, en polyoléfine réticulée par irradiation, avec paroi interne thermofusible. Diamètre 12 mm avant retreint, 3 mm après, rapport 4:1, longueur 1,2 m.\u003c\/p\u003e\n\n\u003ch3\u003eCe que fait la paroi interne\u003c\/h3\u003e\n\u003cp\u003eSous l'effet de la chaleur, la paroi externe se rétracte pendant que la paroi interne fond et flue. En refroidissant, elle solidarise la gaine et le support. Le résultat est un joint continu, sans point d'entrée pour l'humidité, là où une gaine simple paroi ne fait que serrer mécaniquement. L'adhésif prend sur le PVC, le polyéthylène, les caoutchoucs et l'aluminium.\u003c\/p\u003e\n\n\u003ch3\u003eTempératures de pose\u003c\/h3\u003e\n\u003cp\u003eLe retreint commence vers 80 °C, mais le recouvrement complet demande \u003cstrong\u003e125 °C\u003c\/strong\u003e. C'est la valeur à viser au décapeur : chauffer seulement jusqu'à 110 °C donne un retreint partiel et un collage incomplet. Une fois posée, la gaine tient en service continu de −55 °C à +110 °C.\u003c\/p\u003e\n\n\u003ch3\u003eCaractéristiques\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRapport de retreint : 4:1\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur fourni (expansé) : 12 mm\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur après retreint libre : 3 mm\u003c\/li\u003e\n  \u003cli\u003eÉpaisseur de paroi après retreint : 1,40 ± 0,28 mm, dont 0,61 mm de paroi thermofusible\u003c\/li\u003e\n  \u003cli\u003eLongueur : 1,2 m (conditionnement standard TE de 4 pieds)\u003c\/li\u003e\n  \u003cli\u003eMatière : polyoléfine réticulée par irradiation, paroi interne thermofusible\u003c\/li\u003e\n  \u003cli\u003eCouleur : noir\u003c\/li\u003e\n  \u003cli\u003eDébut de retreint : 80 °C — recouvrement complet : 125 °C\u003c\/li\u003e\n  \u003cli\u003eService continu : −55 °C à +110 °C\u003c\/li\u003e\n  \u003cli\u003eRigidité diélectrique : 300 V\/mil minimum\u003c\/li\u003e\n  \u003cli\u003eAbsorption d'eau : 0,5 % maximum (24 h à 23 °C)\u003c\/li\u003e\n  \u003cli\u003ePoids : 23,7 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpécifications et agréments\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRaychem RW-2063 (noir)\u003c\/li\u003e\n  \u003cli\u003eAMS-DTL-23053\/4, classe 3\u003c\/li\u003e\n  \u003cli\u003eUL E85381, 110 °C \/ 600 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCe que la fiche technique ne dit pas\u003c\/h3\u003e\n\u003cp\u003eTE qualifie la tenue aux fluides sur gazole, fluide hydraulique et huile de lubrification, 24 h à 23 °C. Aucune donnée de tenue aux UV n'est publiée pour cette gamme : en pont exposé, considérer la gaine comme un joint et non comme une protection de surface durable. La référence est produite en noir ; les autres teintes existent chez TE mais sur commande spéciale, pas sur stock.\u003c\/p\u003e","brand":"TE Connectivity","offers":[{"title":"Default Title","offer_id":53723831664980,"sku":"ATUM-12\/3-0-STK","price":12.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/product-high-res_050ee4de-6e2e-4cc4-a2ac-58e35e747baa.jpg?v=1787068735"},{"product_id":"te-connectivity-gaine-thermoretractable-colle-16mm-4-1","title":"Heat shrink tubing with 4:1 adhesive; 16mm; L: 1.2m black","description":"\u003cp\u003eGaine thermorétractable à double paroi TE Connectivity Raychem ATUM, en polyoléfine réticulée par irradiation, avec paroi interne thermofusible. Diamètre 16 mm avant retreint, 4 mm après, rapport 4:1, longueur 1,2 m.\u003c\/p\u003e\n\n\u003ch3\u003eCe que fait la paroi interne\u003c\/h3\u003e\n\u003cp\u003eSous l'effet de la chaleur, la paroi externe se rétracte pendant que la paroi interne fond et flue. En refroidissant, elle solidarise la gaine et le support. Le résultat est un joint continu, sans point d'entrée pour l'humidité, là où une gaine simple paroi ne fait que serrer mécaniquement. L'adhésif prend sur le PVC, le polyéthylène, les caoutchoucs et l'aluminium.\u003c\/p\u003e\n\n\u003ch3\u003eTempératures de pose\u003c\/h3\u003e\n\u003cp\u003eLe retreint commence vers 80 °C, mais le recouvrement complet demande \u003cstrong\u003e125 °C\u003c\/strong\u003e. C'est la valeur à viser au décapeur : chauffer seulement jusqu'à 110 °C donne un retreint partiel et un collage incomplet. Une fois posée, la gaine tient en service continu de −55 °C à +110 °C.\u003c\/p\u003e\n\n\u003ch3\u003eCaractéristiques\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRapport de retreint : 4:1\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur fourni (expansé) : 16 mm\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur après retreint libre : 4 mm\u003c\/li\u003e\n  \u003cli\u003eÉpaisseur de paroi après retreint : 1,78 ± 0,38 mm, dont 0,76 mm de paroi thermofusible\u003c\/li\u003e\n  \u003cli\u003eLongueur : 1,2 m (conditionnement standard TE de 4 pieds)\u003c\/li\u003e\n  \u003cli\u003eMatière : polyoléfine réticulée par irradiation, paroi interne thermofusible\u003c\/li\u003e\n  \u003cli\u003eCouleur : noir\u003c\/li\u003e\n  \u003cli\u003eDébut de retreint : 80 °C — recouvrement complet : 125 °C\u003c\/li\u003e\n  \u003cli\u003eService continu : −55 °C à +110 °C\u003c\/li\u003e\n  \u003cli\u003eRigidité diélectrique : 300 V\/mil minimum\u003c\/li\u003e\n  \u003cli\u003eAbsorption d'eau : 0,5 % maximum (24 h à 23 °C)\u003c\/li\u003e\n  \u003cli\u003ePoids : 47,7 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpécifications et agréments\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRaychem RW-2063 (noir)\u003c\/li\u003e\n  \u003cli\u003eAMS-DTL-23053\/4, classe 3\u003c\/li\u003e\n  \u003cli\u003eUL E85381, 110 °C \/ 600 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCe que la fiche technique ne dit pas\u003c\/h3\u003e\n\u003cp\u003eTE qualifie la tenue aux fluides sur gazole, fluide hydraulique et huile de lubrification, 24 h à 23 °C. Aucune donnée de tenue aux UV n'est publiée pour cette gamme : en pont exposé, considérer la gaine comme un joint et non comme une protection de surface durable. La référence est produite en noir ; les autres teintes existent chez TE mais sur commande spéciale, pas sur stock.\u003c\/p\u003e","brand":"TE Connectivity","offers":[{"title":"Default Title","offer_id":53723831828820,"sku":"ATUM-16\/4-0-STK","price":16.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/product-high-res_74a5623b-ba02-4d0d-817f-38fbb02fe661.jpg?v=1787068735"},{"product_id":"te-connectivity-gaine-thermo-adhesive-24mm-4-1-noir","title":"Heat shrink tubing with 4:1 adhesive; 24mm; L: 1.2m black","description":"\u003cp\u003eGaine thermorétractable à double paroi TE Connectivity Raychem ATUM, en polyoléfine réticulée par irradiation, avec paroi interne thermofusible. Diamètre 24 mm avant retreint, 6 mm après, rapport 4:1, longueur 1,2 m.\u003c\/p\u003e\n\n\u003ch3\u003eCe que fait la paroi interne\u003c\/h3\u003e\n\u003cp\u003eSous l'effet de la chaleur, la paroi externe se rétracte pendant que la paroi interne fond et flue. En refroidissant, elle solidarise la gaine et le support. Le résultat est un joint continu, sans point d'entrée pour l'humidité, là où une gaine simple paroi ne fait que serrer mécaniquement. L'adhésif prend sur le PVC, le polyéthylène, les caoutchoucs et l'aluminium.\u003c\/p\u003e\n\n\u003ch3\u003eTempératures de pose\u003c\/h3\u003e\n\u003cp\u003eLe retreint commence vers 80 °C, mais le recouvrement complet demande \u003cstrong\u003e125 °C\u003c\/strong\u003e. C'est la valeur à viser au décapeur : chauffer seulement jusqu'à 110 °C donne un retreint partiel et un collage incomplet. Une fois posée, la gaine tient en service continu de −55 °C à +110 °C.\u003c\/p\u003e\n\n\u003ch3\u003eCaractéristiques\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRapport de retreint : 4:1\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur fourni (expansé) : 24 mm\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur après retreint libre : 6 mm\u003c\/li\u003e\n  \u003cli\u003eÉpaisseur de paroi après retreint : 2,25 ± 0,55 mm, dont 0,76 mm de paroi thermofusible\u003c\/li\u003e\n  \u003cli\u003eLongueur : 1,2 m (conditionnement standard TE de 4 pieds)\u003c\/li\u003e\n  \u003cli\u003eMatière : polyoléfine réticulée par irradiation, paroi interne thermofusible\u003c\/li\u003e\n  \u003cli\u003eCouleur : noir\u003c\/li\u003e\n  \u003cli\u003eDébut de retreint : 80 °C — recouvrement complet : 125 °C\u003c\/li\u003e\n  \u003cli\u003eService continu : −55 °C à +110 °C\u003c\/li\u003e\n  \u003cli\u003eRigidité diélectrique : 300 V\/mil minimum\u003c\/li\u003e\n  \u003cli\u003eAbsorption d'eau : 0,5 % maximum (24 h à 23 °C)\u003c\/li\u003e\n  \u003cli\u003ePoids : 80,53 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpécifications et agréments\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRaychem RW-2063 (noir)\u003c\/li\u003e\n  \u003cli\u003eAMS-DTL-23053\/4, classe 3\u003c\/li\u003e\n  \u003cli\u003eUL E85381, 110 °C \/ 600 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCe que la fiche technique ne dit pas\u003c\/h3\u003e\n\u003cp\u003eTE qualifie la tenue aux fluides sur gazole, fluide hydraulique et huile de lubrification, 24 h à 23 °C. Aucune donnée de tenue aux UV n'est publiée pour cette gamme : en pont exposé, considérer la gaine comme un joint et non comme une protection de surface durable. La référence est produite en noir ; les autres teintes existent chez TE mais sur commande spéciale, pas sur stock.\u003c\/p\u003e","brand":"TE Connectivity","offers":[{"title":"Default Title","offer_id":53723832385876,"sku":"ATUM-24\/6-0-STK","price":16.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/product-high-res.jpg?v=1787068691"},{"product_id":"te-connectivity-gaine-thermoretractable-colle-4-1-32mm-noir","title":"Heat shrink tubing with 4:1 adhesive; 32mm; L: 1.2m black","description":"\u003cp\u003eGaine thermorétractable à double paroi TE Connectivity Raychem ATUM, en polyoléfine réticulée par irradiation, avec paroi interne thermofusible. Diamètre 32 mm avant retreint, 8 mm après, rapport 4:1, longueur 1,2 m.\u003c\/p\u003e\n\n\u003ch3\u003eCe que fait la paroi interne\u003c\/h3\u003e\n\u003cp\u003eSous l'effet de la chaleur, la paroi externe se rétracte pendant que la paroi interne fond et flue. En refroidissant, elle solidarise la gaine et le support. Le résultat est un joint continu, sans point d'entrée pour l'humidité, là où une gaine simple paroi ne fait que serrer mécaniquement. L'adhésif prend sur le PVC, le polyéthylène, les caoutchoucs et l'aluminium.\u003c\/p\u003e\n\n\u003ch3\u003eTempératures de pose\u003c\/h3\u003e\n\u003cp\u003eLe retreint commence vers 80 °C, mais le recouvrement complet demande \u003cstrong\u003e125 °C\u003c\/strong\u003e. C'est la valeur à viser au décapeur : chauffer seulement jusqu'à 110 °C donne un retreint partiel et un collage incomplet. Une fois posée, la gaine tient en service continu de −55 °C à +110 °C.\u003c\/p\u003e\n\n\u003ch3\u003eCaractéristiques\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRapport de retreint : 4:1\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur fourni (expansé) : 32 mm\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur après retreint libre : 8 mm\u003c\/li\u003e\n  \u003cli\u003eÉpaisseur de paroi après retreint : 2,54 ± 0,55 mm, dont 1,00 mm de paroi thermofusible\u003c\/li\u003e\n  \u003cli\u003eLongueur : 1,2 m (conditionnement standard TE de 4 pieds)\u003c\/li\u003e\n  \u003cli\u003eMatière : polyoléfine réticulée par irradiation, paroi interne thermofusible\u003c\/li\u003e\n  \u003cli\u003eCouleur : noir\u003c\/li\u003e\n  \u003cli\u003eDébut de retreint : 80 °C — recouvrement complet : 125 °C\u003c\/li\u003e\n  \u003cli\u003eService continu : −55 °C à +110 °C\u003c\/li\u003e\n  \u003cli\u003eRigidité diélectrique : 300 V\/mil minimum\u003c\/li\u003e\n  \u003cli\u003eAbsorption d'eau : 0,5 % maximum (24 h à 23 °C)\u003c\/li\u003e\n  \u003cli\u003ePoids : 107,5 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpécifications et agréments\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRaychem RW-2063 (noir)\u003c\/li\u003e\n  \u003cli\u003eAMS-DTL-23053\/4, classe 3\u003c\/li\u003e\n  \u003cli\u003eUL E85381, 110 °C \/ 600 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCe que la fiche technique ne dit pas\u003c\/h3\u003e\n\u003cp\u003eTE qualifie la tenue aux fluides sur gazole, fluide hydraulique et huile de lubrification, 24 h à 23 °C. Aucune donnée de tenue aux UV n'est publiée pour cette gamme : en pont exposé, considérer la gaine comme un joint et non comme une protection de surface durable. La référence est produite en noir ; les autres teintes existent chez TE mais sur commande spéciale, pas sur stock.\u003c\/p\u003e","brand":"TE Connectivity","offers":[{"title":"Default Title","offer_id":53723832582484,"sku":"ATUM-32\/8-0-STK","price":36.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/product-high-res_af7784a4-c11f-4711-aca4-1a9c51bb932e.jpg?v=1787068735"},{"product_id":"te-connectivity-gaine-thermo-colle-4-1-4mm-1-2m-noir","title":"Heat shrink tubing with 4:1 adhesive; 4mm; L: 1.2m black","description":"\u003cp\u003eGaine thermorétractable à double paroi TE Connectivity Raychem ATUM, en polyoléfine réticulée par irradiation, avec paroi interne thermofusible. Diamètre 4 mm avant retreint, 1 mm après, rapport 4:1, longueur 1,2 m.\u003c\/p\u003e\n\n\u003ch3\u003eCe que fait la paroi interne\u003c\/h3\u003e\n\u003cp\u003eSous l'effet de la chaleur, la paroi externe se rétracte pendant que la paroi interne fond et flue. En refroidissant, elle solidarise la gaine et le support. Le résultat est un joint continu, sans point d'entrée pour l'humidité, là où une gaine simple paroi ne fait que serrer mécaniquement. L'adhésif prend sur le PVC, le polyéthylène, les caoutchoucs et l'aluminium.\u003c\/p\u003e\n\n\u003ch3\u003eTempératures de pose\u003c\/h3\u003e\n\u003cp\u003eLe retreint commence vers 80 °C, mais le recouvrement complet demande \u003cstrong\u003e125 °C\u003c\/strong\u003e. C'est la valeur à viser au décapeur : chauffer seulement jusqu'à 110 °C donne un retreint partiel et un collage incomplet. Une fois posée, la gaine tient en service continu de −55 °C à +110 °C.\u003c\/p\u003e\n\n\u003ch3\u003eCaractéristiques\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRapport de retreint : 4:1\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur fourni (expansé) : 4 mm\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur après retreint libre : 1 mm\u003c\/li\u003e\n  \u003cli\u003eÉpaisseur de paroi après retreint : 1,00 ± 0,28 mm, dont 0,50 mm de paroi thermofusible\u003c\/li\u003e\n  \u003cli\u003eLongueur : 1,2 m (conditionnement standard TE de 4 pieds)\u003c\/li\u003e\n  \u003cli\u003eMatière : polyoléfine réticulée par irradiation, paroi interne thermofusible\u003c\/li\u003e\n  \u003cli\u003eCouleur : noir\u003c\/li\u003e\n  \u003cli\u003eDébut de retreint : 80 °C — recouvrement complet : 125 °C\u003c\/li\u003e\n  \u003cli\u003eService continu : −55 °C à +110 °C\u003c\/li\u003e\n  \u003cli\u003eRigidité diélectrique : 300 V\/mil minimum\u003c\/li\u003e\n  \u003cli\u003eAbsorption d'eau : 0,5 % maximum (24 h à 23 °C)\u003c\/li\u003e\n  \u003cli\u003ePoids : 11,1 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpécifications et agréments\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRaychem RW-2063 (noir)\u003c\/li\u003e\n  \u003cli\u003eAMS-DTL-23053\/4, classe 3\u003c\/li\u003e\n  \u003cli\u003eHors périmètre UL E85381 : la reconnaissance UL de la gamme ATUM exclut explicitement les tailles 3\/1 et 4\/1\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCe que la fiche technique ne dit pas\u003c\/h3\u003e\n\u003cp\u003eTE qualifie la tenue aux fluides sur gazole, fluide hydraulique et huile de lubrification, 24 h à 23 °C. Aucune donnée de tenue aux UV n'est publiée pour cette gamme : en pont exposé, considérer la gaine comme un joint et non comme une protection de surface durable. La référence est produite en noir ; les autres teintes existent chez TE mais sur commande spéciale, pas sur stock.\u003c\/p\u003e","brand":"TE Connectivity","offers":[{"title":"Default Title","offer_id":53723832746324,"sku":"ATUM-4\/1-0-STK","price":10.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/product-high-res_578ebb45-d311-4abc-9e8b-0097e6df9ab5.jpg?v=1787068737"},{"product_id":"te-connectivity-gaine-thermoretractable-colle-4-1-8mm-noir","title":"Heat shrink tubing with 4:1 adhesive; 8mm; L: 1.2m black","description":"\u003cp\u003eGaine thermorétractable à double paroi TE Connectivity Raychem ATUM, en polyoléfine réticulée par irradiation, avec paroi interne thermofusible. Diamètre 8 mm avant retreint, 2 mm après, rapport 4:1, longueur 1,2 m.\u003c\/p\u003e\n\n\u003ch3\u003eCe que fait la paroi interne\u003c\/h3\u003e\n\u003cp\u003eSous l'effet de la chaleur, la paroi externe se rétracte pendant que la paroi interne fond et flue. En refroidissant, elle solidarise la gaine et le support. Le résultat est un joint continu, sans point d'entrée pour l'humidité, là où une gaine simple paroi ne fait que serrer mécaniquement. L'adhésif prend sur le PVC, le polyéthylène, les caoutchoucs et l'aluminium.\u003c\/p\u003e\n\n\u003ch3\u003eTempératures de pose\u003c\/h3\u003e\n\u003cp\u003eLe retreint commence vers 80 °C, mais le recouvrement complet demande \u003cstrong\u003e125 °C\u003c\/strong\u003e. C'est la valeur à viser au décapeur : chauffer seulement jusqu'à 110 °C donne un retreint partiel et un collage incomplet. Une fois posée, la gaine tient en service continu de −55 °C à +110 °C.\u003c\/p\u003e\n\n\u003ch3\u003eCaractéristiques\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRapport de retreint : 4:1\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur fourni (expansé) : 8 mm\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur après retreint libre : 2 mm\u003c\/li\u003e\n  \u003cli\u003eÉpaisseur de paroi après retreint : 1,00 ± 0,28 mm, dont 0,50 mm de paroi thermofusible\u003c\/li\u003e\n  \u003cli\u003eLongueur : 1,2 m (conditionnement standard TE de 4 pieds)\u003c\/li\u003e\n  \u003cli\u003eMatière : polyoléfine réticulée par irradiation, paroi interne thermofusible\u003c\/li\u003e\n  \u003cli\u003eCouleur : noir\u003c\/li\u003e\n  \u003cli\u003eDébut de retreint : 80 °C — recouvrement complet : 125 °C\u003c\/li\u003e\n  \u003cli\u003eService continu : −55 °C à +110 °C\u003c\/li\u003e\n  \u003cli\u003eRigidité diélectrique : 300 V\/mil minimum\u003c\/li\u003e\n  \u003cli\u003eAbsorption d'eau : 0,5 % maximum (24 h à 23 °C)\u003c\/li\u003e\n  \u003cli\u003ePoids : 13,6 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpécifications et agréments\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRaychem RW-2063 (noir)\u003c\/li\u003e\n  \u003cli\u003eAMS-DTL-23053\/4, classe 3\u003c\/li\u003e\n  \u003cli\u003eUL E85381, 110 °C \/ 600 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCe que la fiche technique ne dit pas\u003c\/h3\u003e\n\u003cp\u003eTE qualifie la tenue aux fluides sur gazole, fluide hydraulique et huile de lubrification, 24 h à 23 °C. Aucune donnée de tenue aux UV n'est publiée pour cette gamme : en pont exposé, considérer la gaine comme un joint et non comme une protection de surface durable. La référence est produite en noir ; les autres teintes existent chez TE mais sur commande spéciale, pas sur stock.\u003c\/p\u003e","brand":"TE Connectivity","offers":[{"title":"Default Title","offer_id":53723833008468,"sku":"ATUM-8\/2-0-STK","price":13.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/product-high-res_20604b4a-9fa5-4148-9b6c-bda96b857d40.jpg?v=1787068735"},{"product_id":"gaine-thermo-colle-12mm-noire-au-metre","title":"null","description":"\u003cp\u003eGaine thermorétractable noire avec paroi interne adhésive, Ø 12 mm avant retreint et Ø 4 mm après retreint libre, rapport \u003cstrong\u003e3:1\u003c\/strong\u003e, vendue \u003cstrong\u003eau mètre\u003c\/strong\u003e. La quantité panier est la longueur en mètres.\u003c\/p\u003e\n\n\u003ch3\u003eCe que fait la colle\u003c\/h3\u003e\n\u003cp\u003eÀ la pose, la paroi interne fond et vient combler l'espace entre la gaine et le support. Le résultat est un manchon solidaire du câble, plus résistant à l'humidité qu'une gaine simple paroi qui ne fait que serrer.\u003c\/p\u003e\n\n\u003ch3\u003eChoisir le bon diamètre\u003c\/h3\u003e\n\u003cp\u003eLe Ø 12 mm doit passer sur le point le plus large à couvrir, et le Ø 4 mm après retreint doit être plus petit que le support pour que la gaine serre. Entre ces deux valeurs, le rapport 3:1 laisse une plage de rattrapage confortable — utile sur une jonction où le diamètre change.\u003c\/p\u003e\n\n\u003ch3\u003eCaractéristiques\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRapport de retreint : 3:1\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur avant retreint : 12 mm\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur après retreint libre : 4 mm\u003c\/li\u003e\n  \u003cli\u003eParoi interne adhésive (thermofusible)\u003c\/li\u003e\n  \u003cli\u003eCouleur : noir\u003c\/li\u003e\n  \u003cli\u003eVente au mètre — 1 quantité = 1 mètre\u003c\/li\u003e\n  \u003cli\u003eLivraison en tronçons de \u003cstrong\u003e1,2 m continu maximum\u003c\/strong\u003e (longueur d'approvisionnement)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCe que cette fiche ne dit pas\u003c\/h3\u003e\n\u003cp\u003eRéférence d'accastillage sans fiche technique fabricant publiée : le rapport de retreint et les diamètres ci-dessus proviennent du catalogue fournisseur, mais nous n'avons \u003cstrong\u003eni plage de température certifiée, ni agrément UL, ni norme de référence\u003c\/strong\u003e pour cette gamme. Pour un usage où ces garanties comptent — étanchéité spécifiée, faisceau moteur, application contractuelle — utiliser la gamme TE Connectivity ATUM du catalogue, documentée (UL E85381, AMS-DTL-23053\/4, −55 °C à +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":53723870462292,"sku":"TH124","price":6.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_63a36cb4-e3ad-42bf-8b5c-ed9fc3728138.png?v=1787061415"},{"product_id":"gaine-thermo-colle-18mm-noire-au-metre","title":"null","description":"\u003cp\u003eGaine thermorétractable noire avec paroi interne adhésive, Ø 18 mm avant retreint et Ø 6 mm après retreint libre, rapport \u003cstrong\u003e3:1\u003c\/strong\u003e, vendue \u003cstrong\u003eau mètre\u003c\/strong\u003e. La quantité panier est la longueur en mètres.\u003c\/p\u003e\n\n\u003ch3\u003eCe que fait la colle\u003c\/h3\u003e\n\u003cp\u003eÀ la pose, la paroi interne fond et vient combler l'espace entre la gaine et le support. Le résultat est un manchon solidaire du câble, plus résistant à l'humidité qu'une gaine simple paroi qui ne fait que serrer.\u003c\/p\u003e\n\n\u003ch3\u003eChoisir le bon diamètre\u003c\/h3\u003e\n\u003cp\u003eLe Ø 18 mm doit passer sur le point le plus large à couvrir, et le Ø 6 mm après retreint doit être plus petit que le support pour que la gaine serre. Entre ces deux valeurs, le rapport 3:1 laisse une plage de rattrapage confortable — utile sur une jonction où le diamètre change.\u003c\/p\u003e\n\n\u003ch3\u003eCaractéristiques\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eRapport de retreint : 3:1\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur avant retreint : 18 mm\u003c\/li\u003e\n  \u003cli\u003eDiamètre intérieur après retreint libre : 6 mm\u003c\/li\u003e\n  \u003cli\u003eParoi interne adhésive (thermofusible)\u003c\/li\u003e\n  \u003cli\u003eCouleur : noir\u003c\/li\u003e\n  \u003cli\u003eVente au mètre — 1 quantité = 1 mètre\u003c\/li\u003e\n  \u003cli\u003eLivraison en tronçons de \u003cstrong\u003e1,2 m continu maximum\u003c\/strong\u003e (longueur d'approvisionnement)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCe que cette fiche ne dit pas\u003c\/h3\u003e\n\u003cp\u003eRéférence d'accastillage sans fiche technique fabricant publiée : le rapport de retreint et les diamètres ci-dessus proviennent du catalogue fournisseur, mais nous n'avons \u003cstrong\u003eni plage de température certifiée, ni agrément UL, ni norme de référence\u003c\/strong\u003e pour cette gamme. Pour un usage où ces garanties comptent — étanchéité spécifiée, faisceau moteur, application contractuelle — utiliser la gamme TE Connectivity ATUM du catalogue, documentée (UL E85381, AMS-DTL-23053\/4, −55 °C à +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":53723870888276,"sku":"TH184","price":9.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_0f31f65f-6ab9-4e2c-a3b8-b168a79553ea.png?v=1787061425"},{"product_id":"gaine-thermo-colle-noire-3mm-au-metre","title":"Heat-shrink tubing with black adhesive 3mm per meter","description":"\u003cp\u003eBlack heat-shrink tubing with \u003cstrong\u003eadhesive inner wall\u003c\/strong\u003e, Ø 3 mm before shrinking and Ø 1 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the adhesive does\u003c\/h3\u003e\n\u003cp\u003eDuring installation, the inner wall melts and fills the gap between the tubing and the support. The result is a sleeve bonded to the cable, more resistant to moisture than a single-wall tubing that only tightens.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the right diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 3 mm must fit over the widest point to be covered, and the Ø 1 mm after shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInner diameter before shrinking: 3 mm\u003c\/li\u003e\n  \u003cli\u003eInner diameter after free shrinking: 1 mm\u003c\/li\u003e\n  \u003cli\u003eAdhesive inner wall (thermofusible)\u003c\/li\u003e\n  \u003cli\u003eColor: black\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in \u003cstrong\u003e1.2 m continuous sections maximum\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not say\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified waterproofing, engine harness, contractual use — use the TE Connectivity ATUM line from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839563968852,"sku":"TH304","price":3.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_b07d4d02-7b03-4821-8ea0-528977ff4b75.png?v=1787069256"},{"product_id":"gaine-thermo-noire-12mm-au-metre","title":"Black heat-shrink tubing 12mm per meter","description":"\u003cp\u003eBlack heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, Ø 12 mm before shrinking and Ø 4 mm after free shrinking, ratio \u003cstrong\u003e3:1\u003c\/strong\u003e, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eNon-adhesive tubing grips mechanically without sealing. Suitable for sheathing, identification, and insulation repair. For a junction requiring watertightness — crimped terminal exposed, wet bulkhead penetration — use adhesive tubing: adhesive version available in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003eSelecting the correct diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 12 mm must fit over the largest point to be covered, and the Ø 4 mm after shrinking must be smaller than the support for a tight grip. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInternal diameter before shrinking: 12 mm\u003c\/li\u003e\n  \u003cli\u003eInternal diameter after free shrinking: 4 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical grip, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: black\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in continuous sections of \u003cstrong\u003emaximum 1.2 m\u003c\/strong\u003e (procurement length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not cover\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839568228692,"sku":"TH121","price":5.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_5978a686-acef-4341-81bb-ba3055639d27.png?v=1787069257"},{"product_id":"gaine-thermo-rouge-12mm-au-metre","title":"Red 12 mm heat-shrink tubing per meter","description":"\u003cp\u003eRed heat-shrink tubing \u003cstrong\u003ewithout adhesive\u003c\/strong\u003e, Ø 12 mm before shrinking and Ø 4 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eWithout adhesive, the tubing mechanically grips the support without sealing it. This is suitable for polarity marking and circuit identification. For a junction that must remain watertight — crimped terminal exposed, wet bulkhead penetration — use adhesive-lined tubing: the adhesive version is available in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003ePolarity marking\u003c\/h3\u003e\n\u003cp\u003eRed is used to mark the positive on a DC installation. The color code is only valid if consistently applied throughout the vessel: a red sleeve on a negative is worse than no sleeve at all.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the correct diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 12 mm must fit over the widest point to be covered, and the Ø 4 mm after shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInternal diameter before shrinking: 12 mm\u003c\/li\u003e\n  \u003cli\u003eInternal diameter after free shrinking: 4 mm\u003c\/li\u003e\n  \u003cli\u003eNo adhesive — mechanical grip, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: red\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivered in \u003cstrong\u003econtinuous lengths up to 1.2 m maximum\u003c\/strong\u003e (procurement length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not cover\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839569277268,"sku":"TH123","price":5.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_fa8a642a-de95-44db-8d4c-df41298e82fb.png?v=1787069275"},{"product_id":"gaine-thermo-noire-18mm-au-metre","title":"Black heat-shrink tubing 18mm per meter","description":"\u003cp\u003eBlack heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, Ø 18 mm before shrinking and Ø 6 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eNon-adhesive tubing mechanically grips the support without sealing it. Suitable for sheathing, identification, and insulation repair. For a junction requiring watertightness — crimped terminal exposed, wet bulkhead penetration — use adhesive-lined tubing: adhesive version available in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003eSelecting the correct diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 18 mm must fit over the largest point to be covered, and the Ø 6 mm after shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInternal diameter before shrinking: 18 mm\u003c\/li\u003e\n  \u003cli\u003eInternal diameter after free shrinking: 6 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical grip, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: black\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in continuous sections up to \u003cstrong\u003e1.2 m maximum\u003c\/strong\u003e (procurement length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this listing does not cover\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above are sourced from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, fully documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839570391380,"sku":"TH181","price":8.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_35691b61-37b6-4bbe-a0e2-649ebf036dd2.png?v=1787069274"},{"product_id":"gaine-thermo-rouge-18mm-au-metre","title":"Red 18mm heat-shrink tubing per meter","description":"\u003cp\u003eRed heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, Ø 18 mm before shrinking and Ø 6 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eNon-adhesive tubing grips the support mechanically without sealing it. This is what is needed for polarity marking and circuit identification. For a junction that must remain watertight — crimped terminal exposed, wet bulkhead penetration — use adhesive-lined tubing: the adhesive version exists in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003ePolarity marking\u003c\/h3\u003e\n\u003cp\u003eRed is used to mark the positive on a DC installation. The color code only has value if it is maintained throughout the boat: a red sleeve on a negative is worse than no sleeve at all.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the right diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 18 mm must fit over the widest point to be covered, and the Ø 6 mm after shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInner diameter before shrinking: 18 mm\u003c\/li\u003e\n  \u003cli\u003eInner diameter after free shrinking: 6 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical grip, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: red\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivered in continuous \u003cstrong\u003e1.2 m maximum sections\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not cover\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839571046740,"sku":"TH183","price":8.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_643a9a2c-6623-480c-9625-aeede4d47250.png?v=1787069275"},{"product_id":"gaine-thermo-noire-24mm-au-metre","title":"Black 24mm heat-shrink tubing per meter","description":"\u003cp\u003eBlack heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, Ø 24 mm before shrinking and Ø 8 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eNon-adhesive tubing grips the support mechanically without sealing it. This is suitable for sheathing, identification, and insulation repair. For a junction requiring watertightness — crimped ferrule exposed, wet bulkhead passage — use adhesive tubing: the adhesive version is available in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003eSelecting the correct diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 24 mm must fit over the largest point to be covered, and the Ø 8 mm after shrinking must be smaller than the support for the tubing to grip. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInner diameter before shrinking: 24 mm\u003c\/li\u003e\n  \u003cli\u003eInner diameter after free shrinking: 8 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical grip, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: black\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in \u003cstrong\u003e1.2 m continuous sections maximum\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this listing does not cover\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this range. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839572193620,"sku":"TH241","price":11.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_9feb26e7-f168-428a-8792-a8f7f87596c1.png?v=1787069274"},{"product_id":"gaine-thermo-rouge-24mm-au-metre","title":"Red 24mm heat-shrink tubing per meter","description":"\u003cp\u003eRed heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, Ø 24 mm before shrinking and Ø 8 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eWithout adhesive, the tubing mechanically grips the support without sealing it. This is what is needed for polarity marking and circuit identification. For a junction that must remain watertight — crimped terminal exposed, wet bulkhead penetration — use adhesive-lined tubing: the adhesive version is available in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003ePolarity marking\u003c\/h3\u003e\n\u003cp\u003eRed is used to mark the positive on a DC installation. The color code only has value if it is consistently applied throughout the installation: a red sleeve on a negative is worse than no sleeve at all.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the right diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 24 mm must fit over the largest point to be covered, and the Ø 8 mm after free shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInside diameter before shrinking: 24 mm\u003c\/li\u003e\n  \u003cli\u003eInside diameter after free shrinking: 8 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical grip, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: red\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in continuous \u003cstrong\u003e1.2 m maximum sections\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not state\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, no UL approval, nor reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839572750676,"sku":"TH243","price":12.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_8e9e5eea-2ac4-462b-993f-b0d0af47a2d2.png?v=1787069276"},{"product_id":"gaine-thermo-colle-noire-24mm-au-metre","title":"Heat-shrink tubing with black adhesive 24mm per meter","description":"\u003cp\u003eBlack heat-shrink tubing with \u003cstrong\u003eadhesive inner wall\u003c\/strong\u003e, Ø 24 mm before shrinking and Ø 8 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the adhesive does\u003c\/h3\u003e\n\u003cp\u003eWhen installed, the inner wall melts and fills the gap between the tubing and the support. The result is a sleeve bonded to the cable, more resistant to moisture than a simple single-wall tubing that only tightens.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the right diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 24 mm must fit over the widest point to be covered, and the Ø 8 mm after shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInner diameter before shrinking: 24 mm\u003c\/li\u003e\n  \u003cli\u003eInner diameter after free shrinking: 8 mm\u003c\/li\u003e\n  \u003cli\u003eAdhesive inner wall (thermofusible)\u003c\/li\u003e\n  \u003cli\u003eColor: black\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in lengths of \u003cstrong\u003e1.2 m continuous maximum\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not say\u003c\/h3\u003e\n\u003cp\u003eFitting reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified waterproofing, engine harness, contractual use — use the TE Connectivity ATUM line from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839573373268,"sku":"TH244","price":13.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_b8ea72d9-afb7-4d26-ba20-6c4b93d1740d.png?v=1787069256"},{"product_id":"gaine-thermo-noire-3mm-au-metre","title":"Black 3 mm heat-shrink tubing per meter","description":"\u003cp\u003eBlack heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, Ø 3 mm before shrinking and Ø 1 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eNon-adhesive tubing mechanically clamps the support without sealing it. Suitable for sheathing, identification, and insulation repair. For a junction requiring watertightness — crimped terminal exposed, wet bulkhead penetration — use adhesive tubing: adhesive version available in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the right diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 3 mm must fit over the widest point to be covered, and the Ø 1 mm after shrinking must be smaller than the support so the tubing clamps. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInner diameter before shrinking: 3 mm\u003c\/li\u003e\n  \u003cli\u003eInner diameter after free shrinking: 1 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical clamping, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: black\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in continuous sections up to \u003cstrong\u003e1.2 m maximum\u003c\/strong\u003e (procurement length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not cover\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above are taken from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM line from the catalog, fully documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839574487380,"sku":"TH301","price":2.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_17c07454-a07f-48b8-9730-2721e6cd2492.png?v=1787069256"},{"product_id":"gaine-thermo-rouge-3mm-au-metre","title":"3 mm heat-shrink tubing red per meter","description":"\u003cp\u003eRed heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, 3 mm diameter before shrinking and 1 mm after free shrinking, 3:1 shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eNon-adhesive tubing grips the support mechanically without sealing it. This is suitable for polarity marking and circuit identification. For a junction that must remain watertight — crimped ferrule exposed, wet bulkhead penetration — use adhesive-lined tubing: the adhesive version exists in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003ePolarity marking\u003c\/h3\u003e\n\u003cp\u003eRed marks the positive on a DC installation. The color code only has value if applied consistently throughout the installation: a red sleeve on a negative is worse than no sleeve at all.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the correct diameter\u003c\/h3\u003e\n\u003cp\u003eThe 3 mm diameter must fit over the largest point to be covered, and the 1 mm diameter after shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInner diameter before shrinking: 3 mm\u003c\/li\u003e\n  \u003cli\u003eInner diameter after free shrinking: 1 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical grip, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: red\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in continuous lengths up to \u003cstrong\u003e1.2 m maximum\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not state\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839575306580,"sku":"TH303","price":2.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_7064b790-ba44-493e-aea5-894858987019.png?v=1787069275"},{"product_id":"gaine-thermo-noire-6mm-au-metre","title":"Black heat-shrink tubing 6mm per meter","description":"\u003cp\u003eBlack heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, Ø 6 mm before shrinking and Ø 2 mm after free shrinking, ratio \u003cstrong\u003e3:1\u003c\/strong\u003e, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eNon-adhesive tubing grips the support mechanically without sealing it. This is suitable for sheathing, identification, and insulation repair. For a junction requiring watertightness — crimped terminal exposed, wet bulkhead penetration — use adhesive tubing: the adhesive version is available in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the correct diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 6 mm must fit over the widest point to be covered, and the Ø 2 mm after shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInner diameter before shrinking: 6 mm\u003c\/li\u003e\n  \u003cli\u003eInner diameter after free shrinking: 2 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical grip, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: black\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in sections of \u003cstrong\u003e1.2 m continuous maximum\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not state\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above are sourced from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839576027476,"sku":"TH601","price":3.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_6bfe645f-030c-4ea0-9fea-630b7ed43d4b.png?v=1787069257"},{"product_id":"gaine-thermo-rouge-6mm-au-metre","title":"6mm red heat-shrink tubing per meter","description":"\u003cp\u003eRed heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, Ø 6 mm before shrinking and Ø 2 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eNon-adhesive tubing grips the support mechanically without sealing it. This is required for polarity marking and circuit identification. For a junction that must remain watertight — crimped terminal exposed, wet bulkhead penetration — use adhesive-lined tubing: the adhesive version is available in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003ePolarity marking\u003c\/h3\u003e\n\u003cp\u003eRed is used to mark the positive on a DC installation. The color code only has value if it is consistently applied throughout the installation: a red sleeve on a negative is worse than no sleeve at all.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the correct diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 6 mm must pass over the largest point to be covered, and the Ø 2 mm after shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInternal diameter before shrinking: 6 mm\u003c\/li\u003e\n  \u003cli\u003eInternal diameter after free shrinking: 2 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical grip, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: red\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in continuous lengths up to \u003cstrong\u003e1.2 m maximum\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not cover\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified waterproofing, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, fully documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839581630804,"sku":"TH603","price":3.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_66ce7026-5842-4405-961a-951aeab5f12d.png?v=1787069274"},{"product_id":"gaine-thermo-colle-noire-6mm-au-metre","title":"Heat-shrink tubing with black adhesive 6mm per meter","description":"\u003cp\u003eBlack heat-shrink tubing with \u003cstrong\u003eadhesive inner wall\u003c\/strong\u003e, Ø 6 mm before shrinking and Ø 2 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the adhesive does\u003c\/h3\u003e\n\u003cp\u003eWhen installed, the inner wall melts and fills the gap between the tubing and the support. The result is a sleeve that bonds to the cable, more resistant to moisture than a simple single-wall tubing that only constricts.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the right diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 6 mm must fit over the widest point to be covered, and the Ø 2 mm after shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInner diameter before shrinking: 6 mm\u003c\/li\u003e\n  \u003cli\u003eInner diameter after free shrinking: 2 mm\u003c\/li\u003e\n  \u003cli\u003eAdhesive inner wall (thermofusible)\u003c\/li\u003e\n  \u003cli\u003eColor: black\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivered in continuous lengths up to \u003cstrong\u003e1.2 m maximum\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not state\u003c\/h3\u003e\n\u003cp\u003eHardware fitting reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified waterproofing, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839582581076,"sku":"TH604","price":4.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_bf56a33e-db58-4439-a6d0-0aa6f9c1d010.png?v=1787069255"},{"product_id":"gaine-thermo-noire-9mm-au-metre","title":"Black 9mm heat-shrink tubing per meter","description":"\u003cp\u003eBlack heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, Ø 9 mm before shrinking and Ø 3 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eNon-adhesive tubing mechanically clamps the support without sealing it. This is suitable for sheathing, identification, and insulation repair. For a junction that must remain watertight — crimped terminal exposed, wet bulkhead passage — use adhesive tubing: the adhesive version is available in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003eSelecting the correct diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 9 mm must fit over the widest point to be covered, and the Ø 3 mm after shrinking must be smaller than the support so the tubing clamps. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInternal diameter before shrinking: 9 mm\u003c\/li\u003e\n  \u003cli\u003eInternal diameter after free shrinking: 3 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical clamping, no watertight seal\u003c\/li\u003e\n  \u003cli\u003eColor: black\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in lengths of \u003cstrong\u003e1.2 m continuous maximum\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not state\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this range. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM range from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839583695188,"sku":"TH901","price":4.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_010c57b0-7bad-4878-9a27-e142fcb80e9a.png?v=1787069257"},{"product_id":"gaine-thermo-rouge-9mm-au-metre","title":"9mm heat-shrink tubing, red, per meter","description":"\u003cp\u003eRed heat-shrink tubing \u003cstrong\u003enon-adhesive\u003c\/strong\u003e, Ø 9 mm before shrinking and Ø 3 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eSingle wall: implications\u003c\/h3\u003e\n\u003cp\u003eNon-adhesive tubing grips the support mechanically without sealing it. This is suitable for polarity marking and circuit identification. For a junction that must remain watertight — crimped terminal exposed, wet bulkhead penetration — use adhesive tubing: the adhesive version is available in the same diameter.\u003c\/p\u003e\n\n\u003ch3\u003ePolarity marking\u003c\/h3\u003e\n\u003cp\u003eRed is used to mark the positive on a DC installation. The color code is only valid if consistently applied throughout the installation: a red sleeve on a negative is worse than no sleeve at all.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the right diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 9 mm must fit over the largest point to be covered, and the Ø 3 mm after shrinking must be smaller than the support so the tubing grips. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInternal diameter before shrinking: 9 mm\u003c\/li\u003e\n  \u003cli\u003eInternal diameter after free shrinking: 3 mm\u003c\/li\u003e\n  \u003cli\u003eNon-adhesive — mechanical grip, no sealing\u003c\/li\u003e\n  \u003cli\u003eColor: red\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in \u003cstrong\u003e1.2 m continuous lengths maximum\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not cover\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM line from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839584710996,"sku":"TH903","price":4.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge.png?v=1787069219"},{"product_id":"gaine-thermo-colle-noire-9mm-au-metre","title":"Heat-shrink tubing with adhesive black 9mm per meter","description":"\u003cp\u003eBlack heat-shrink tubing with \u003cstrong\u003eadhesive inner wall\u003c\/strong\u003e, Ø 9 mm before shrinking and Ø 3 mm after free shrinking, \u003cstrong\u003e3:1\u003c\/strong\u003e shrink ratio, sold \u003cstrong\u003eper meter\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the adhesive does\u003c\/h3\u003e\n\u003cp\u003eWhen installed, the inner wall melts and fills the gap between the tubing and the support. The result is a sleeve bonded to the cable, more resistant to moisture than a single-wall tubing that only tightens.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing the right diameter\u003c\/h3\u003e\n\u003cp\u003eThe Ø 9 mm must fit over the widest point to be covered, and the Ø 3 mm after shrinking must be smaller than the support so the tubing tightens. Between these two values, the 3:1 ratio provides a comfortable adjustment range.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eShrink ratio: 3:1\u003c\/li\u003e\n  \u003cli\u003eInner diameter before shrinking: 9 mm\u003c\/li\u003e\n  \u003cli\u003eInner diameter after free shrinking: 3 mm\u003c\/li\u003e\n  \u003cli\u003eAdhesive inner wall (thermofusible)\u003c\/li\u003e\n  \u003cli\u003eColor: black\u003c\/li\u003e\n  \u003cli\u003eSold per meter — 1 quantity = 1 meter\u003c\/li\u003e\n  \u003cli\u003eDelivery in lengths of \u003cstrong\u003e1.2 m continuous maximum\u003c\/strong\u003e (supply length)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat this datasheet does not say\u003c\/h3\u003e\n\u003cp\u003eHardware reference without published manufacturer datasheet: the shrink ratio and diameters above come from the supplier catalog, but we have \u003cstrong\u003eno certified temperature range, UL approval, or reference standard\u003c\/strong\u003e for this line. For applications where these guarantees matter — specified watertightness, engine harness, contractual use — use the TE Connectivity ATUM line from the catalog, documented (UL E85381, AMS-DTL-23053\/4, −55 °C to +110 °C).\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"Default Title","offer_id":56839587070292,"sku":"TH904","price":4.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/gaine-thermo-kent-noire-rouge_adf216bb-a735-42ae-8ef5-da76ba1dd8af.png?v=1787069256"}],"url":"https:\/\/skysat.fr\/en-gb\/collections\/cable-protection.oembed","provider":"Skysat","version":"1.0","type":"link"}