{"title":"Ethernet","description":"\u003ch2\u003e Ethernet: the nervous system of your marine electronics\u003c\/h2\u003e\n\n\n \u003cp\u003eIn modern navigation, the Ethernet network forms the backbone of your electronic system. It enables fast and reliable communication between your instruments, chartplotters, radars, and onboard computers. At Skysat, drawing on our experience in offshore racing, we help you build a high-performance Ethernet network tailored to your needs. Here you'll find the essential components to interconnect your devices and optimize data flow on board.\u003c\/p\u003e\n\n\n\u003ch2\u003e Ethernet cables and connectors: the foundation of a reliable network\u003c\/h2\u003e\n\n\n\u003cp\u003e Choosing the right Ethernet cables and connectors is crucial for ensuring the stability and performance of your network. An unsuitable cable or a poor-quality connector can lead to signal loss, interference, and outages. We offer a selection of robust cables and connectors designed to withstand the most demanding marine conditions.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eCat 5e and Cat 6 Ethernet cables:\u003c\/strong\u003e Choose the category that best suits the data transfer speed required by your devices. Cat 6 offers better protection against interference for bandwidth-intensive applications.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eWaterproof RJ45 connectors:\u003c\/strong\u003e Essential for ensuring a reliable connection in humid and saline environments. Check compatibility with your cables.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eEthernet couplers:\u003c\/strong\u003e These allow you to extend an existing Ethernet cable or connect two cables together. Choose waterproof models for optimal protection.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eRJ45 crimping tools:\u003c\/strong\u003e A quality crimping tool is essential for making reliable and durable Ethernet connections.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e Ethernet switches: the control center of your network\u003c\/h2\u003e\n\n\n \u003cp\u003eAn Ethernet switch allows you to connect multiple devices to your network and manage the flow of data between them. It's important to choose a switch that's suitable for the number of devices you want to connect and the required data transfer speed. The switches we offer are designed for marine use and provide high reliability.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eUnmanaged Ethernet switches:\u003c\/strong\u003e Easy to install and use, they are suitable for simple networks not requiring advanced configuration.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eManaged Ethernet switches:\u003c\/strong\u003e Offer advanced features such as traffic prioritization, network segmentation, and performance monitoring.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePoE (Power over Ethernet) Ethernet switches:\u003c\/strong\u003e Allow certain devices (IP cameras, WiFi access points) to be powered via the Ethernet cable, thus simplifying installation.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eNumber of ports:\u003c\/strong\u003e Choose a switch with enough ports to connect all your devices, leaving room for future expansion.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e Ethernet adapters: connect your existing instruments\u003c\/h2\u003e\n\n\n\u003cp\u003e If you own older instruments that are not equipped with Ethernet ports, adapters can allow you to integrate them into your network. These adapters convert data from protocols such as NMEA 0183 or SeaTalk into Ethernet data, thus enabling it to be shared with other devices.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eNMEA 0183 to Ethernet Converters:\u003c\/strong\u003e Allow you to connect NMEA 0183 instruments to your Ethernet network. Check data rate compatibility (4800, 38400 baud).\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSeaTalk to Ethernet Gateways:\u003c\/strong\u003e Allow you to connect SeaTalk (Raymarine) instruments to your Ethernet network. Often require a separate 12V power supply.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eEthernet serial port servers:\u003c\/strong\u003e Convert data from RS-232 or RS-422 serial ports into Ethernet data. Useful for connecting remote control devices.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCompatibility check:\u003c\/strong\u003e Before purchasing an adapter, ensure that it is compatible with the protocols and data rates of your instruments.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cstrong\u003eSkysat's advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Before deploying your Ethernet network, accurately map the location of each device and the required cable lengths. A clear diagram will prevent wiring errors and facilitate future maintenance.\u003c\/p\u003e","products":[{"product_id":"navico-cable-ethernet-15-2m","title":"Ethernet cable 15.2 m","description":"\u003cp\u003eThe Navico 000-0127-37 Ethernet cable, measuring 15.2 meters in length, is a fundamental component for establishing a high-speed data network on your vessel. It is specifically designed to interconnect Navico group equipment, including Simrad, Lowrance, and B\u0026G multifunction displays (MFD), radar antennas, sonar modules such as the StructureScan 3D, and other Ethernet-compatible peripherals.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-performance networking\u003c\/h3\u003e\n\u003cp\u003eThis cable enables smooth and rapid sharing of critical information between your devices. Share marine charts, waypoints, routes, as well as sonar and radar data across multiple screens. Unlike NMEA 2000 networks designed for low-bandwidth data, the Ethernet network is essential for high-volume data streams such as radar imagery or complex sonar views, ensuring real-time updates without latency.\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and installation\u003c\/h3\u003e\n\u003cp\u003eEquipped with 5-pin yellow connectors, this cable ensures a watertight, secure, and vibration-resistant connection—a critical feature for reliability in marine environments. Its 15.2-meter (50-foot) length makes it ideal for installations on larger boats, allowing you to connect distant equipment, such as a radar antenna on a mast or a T-top to the helm console, without requiring couplers or extensions that could introduce failure points. This model is one of the longest lengths offered by Navico, alongside shorter versions of 1.8m, 4.5m, and 7.6m, providing a solution for every configuration.\u003c\/p\u003e","brand":"Navico","offers":[{"title":"","offer_id":53723741520212,"sku":"000-0127-37","price":96.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f3f7aa82-e575-4a8a-bb79-a18dea64e948.png?v=1772639330"},{"product_id":"navico-cable-ethernet-1-8m","title":"Ethernet cable 1.8 m","description":"\u003cp\u003eThe \u003cstrong\u003eNavico 1.8m Ethernet cable (reference 000-0127-51)\u003c\/strong\u003e is an essential component for establishing a reliable and high-performance marine network aboard. Designed specifically for Navico group equipment (B\u0026amp;G, Lowrance, Simrad), this cable ensures stable interconnection between your devices, whether chartplotters, radar modules, sonars, or other compatible navigation instruments. Its 1.8-meter length is ideal for short connections, reducing clutter and potential signal loss over long distances.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-performance connectivity for the Navico ecosystem\u003c\/h3\u003e\n\u003cp\u003eUnlike a standard Ethernet cable, this model is marine-grade to withstand harsh sea conditions: humidity, vibrations, and temperature variations. Its yellow 5-pin connectors provide a secure and watertight connection, preventing corrosion and unexpected disconnections. It is designed to support the high bandwidth required by modern technologies such as Broadband radar, StructureScan sonar, or high-resolution chart data, ensuring latency-free and corruption-free data transmission.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and compatibility\u003c\/h3\u003e\n\u003cp\u003eThis 1.8m cable is perfect for connecting devices close to each other, for example a multifunction display mounted in a console to a sounder module or a network hub like the Navico NEP-2 located nearby. Using Navico-branded cables is crucial to maintaining system integrity and performance. It is directly comparable to Raymarine’s RayNet cables or Garmin’s Marine Network cables, as each brand uses its own proprietary connectivity standard to ensure ecosystem reliability.\u003c\/p\u003e","brand":"Navico","offers":[{"title":"","offer_id":53723741716820,"sku":"000-0127-51","price":34.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f4767dd1-eb5f-43fd-8e91-1d496c3f9916.png?v=1772639323"},{"product_id":"amphenol-cable-ethernet-utp-slim-cat6-28awg-14ft","title":"14FT White CAT6 Slim UTP Ethernet\/Network Cables","description":"\u003cp\u003e\n    The Amphenol UTP SLIM CAT6 28AWG white Ethernet cable, 14 feet long, is designed for network applications requiring CAT6 connectivity in a compact format. This UTP (Unshielded Twisted Pair) cable ensures data transmission up to 1 Gbit\/s over short distances, compliant with Category 6 specifications for frequencies up to 250 MHz.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    With a 28AWG (American Wire Gauge) wire gauge, this Amphenol cable stands out for its slim profile compared to standard CAT6 cables, which typically use 24AWG. This reduced diameter makes it easier to route in tight spaces or crowded conduits without compromising CAT6 performance over its 14-foot (approximately 4.27-meter) length. It is equipped with male RJ45 connectors at each end, ensuring universal compatibility with Ethernet network devices.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and Applications\u003c\/h3\u003e\n\u003cp\u003e\n    This Amphenol UTP SLIM CAT6 28AWG cable is ideal for point-to-point connections between devices such as computers, routers, switches, or access points where space is a constraint. Unlike STP (Shielded Twisted Pair) cables, which provide better immunity to electromagnetic interference in noisy environments, the UTP format is suited for standard home or office installations. While CAT7 or CAT8 cables offer higher data rates (10 Gbit\/s and above), CAT6 remains a relevant and cost-effective solution for current Gigabit Ethernet infrastructures.\n\u003c\/p\u003e","brand":"Amphenol","offers":[{"title":"","offer_id":53723741749588,"sku":"MP-64RJ4528GW-014","price":18.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506535428436-1000.jpg?v=1783616472"},{"product_id":"amphenol-cables-ethernet-reseau-utp-slim-cat6-28awg-bleu-10ft","title":"10FT Blue UTP Slim CAT6 28AWG Ethernet\/Network Cables","description":"\u003cp\u003e\u003cstrong\u003eUTP SLIM CAT6 28AWG blue Ethernet\/network cables 10FT\u003c\/strong\u003e are Ethernet cables designed for data or Ethernet connections aboard. They complement an existing installation or replace a worn cable while maintaining a reference compatible with marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet belongs to the Marine Data Network\/Ethernet category. Length indicated: 10 ft. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact AMPHENOL equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, route cables away from high-power lines and avoid tight bends. Also check the connector type, network category, and usable length between devices before sealing cable passages.\u003c\/p\u003e","brand":"Amphenol","offers":[{"title":"","offer_id":53723741978964,"sku":"MP-64RJ4528GB-010","price":15.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506535592276-1000.jpg?v=1783616478"},{"product_id":"amphenol-cables-ethernet-reseau-utp-slim-cat6-28awg-jaune-1ft","title":"CAT6 28AWG Yellow UTP Slim Ethernet\/Network Cables 1FT","description":"\u003cp\u003e\u003cstrong\u003eUTP SLIM CAT6 28AWG yellow Ethernet\/network cable 1FT\u003c\/strong\u003e is an Ethernet cable designed for data or Ethernet linking onboard. It complements an existing installation or replaces a worn cable while maintaining a reference suitable for marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet belongs to the Marine data network \/ Ethernet family. Length indicated: 1 ft. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact AMPHENOL equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, route cables separately from high-power lines and avoid tight bend radii. Also check the connector type, network category, and usable length between devices before closing cable passages.\u003c\/p\u003e","brand":"Amphenol","offers":[{"title":"","offer_id":53723742208340,"sku":"MP-64RJ4528GY-001","price":6.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506535756116-1000.jpg?v=1783616489"},{"product_id":"amphenol-cables-ethernet-reseau-utp-slim-cat6-28awg-vert-3ft","title":"3FT Green UTP Slim CAT6 28AWG Ethernet\/Network Cables","description":"\u003cp\u003e\u003cstrong\u003eEthernet\/network UTP SLIM CAT6 28AWG green cable 3FT\u003c\/strong\u003e is an Ethernet cable designed for data or Ethernet connections aboard. It complements an existing installation or replaces a worn cable while maintaining a reference suitable for marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet is part of the Marine Data Network\/Ethernet family. Length indicated: 3 ft. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact AMPHENOL equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, route cables separately from high-power lines and avoid tight bend radii. Also check the connector type, network category, and usable length between devices before sealing cable passages.\u003c\/p\u003e","brand":"Amphenol","offers":[{"title":"","offer_id":53723742404948,"sku":"MP-64RJ4528GG-003","price":9.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506535952724-1000.jpg?v=1783616494"},{"product_id":"belden-cable-ethernet-categorie-5e-f-utp-gris-pvc-sans-terminaison","title":"Category 5e F\/UTP Ethernet Cable, Gray, PVC, Unterminated","description":"\u003cp\u003e\u003cstrong\u003eCategory 5e F\/UTP Ethernet cable, Gray, unsheathed PVC\u003c\/strong\u003e is an Ethernet cable designed for data or Ethernet connections aboard. It can be used to complete an existing installation or replace a worn cable while maintaining a reference compatible with marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet is part of the Marine Data\/Ethernet Network family. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact Iridium equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, route the cable separately from high-power lines and avoid tight bend radii. Also check the connector type, network category, and usable length between devices before sealing cable passages.\u003c\/p\u003e","brand":"Belden","offers":[{"title":"Default Title","offer_id":53723745911124,"sku":"4195477","price":2.1,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506539032916-1000.jpg?v=1783601182"},{"product_id":"victron-energy-cable-utp-rj45-1-8m","title":"UTP RJ45 cable 1.8m","description":"\u003cp\u003e\u003cstrong\u003eUTP RJ45 cable 1.8m\u003c\/strong\u003e is an Ethernet cable designed for data or Ethernet connections aboard. It complements an existing installation or replaces a worn cable while maintaining a reference suitable for marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis datasheet is linked to the Marine Data\/Ethernet Network family. Length: 1.8 m. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact Victron Energy equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, route the cable separately from high-power lines and avoid tight bends. Also check the connector type, network category, and usable length between devices before sealing cable passages.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723852931412,"sku":"ASS030064950","price":9.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506618200404-1000.jpg?v=1783602584"},{"product_id":"victron-energy-cable-utp-rj45-3m","title":"UTP RJ45 cable 3m","description":"\u003cp\u003e\u003cstrong\u003eUTP RJ45 cable 3m\u003c\/strong\u003e is an ethernet cable designed for data or Ethernet connections aboard. It complements an existing installation or replaces a worn cable while maintaining a reference compatible with marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet is linked to the Marine Data\/Ethernet Network family. Length: 3 m. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact Victron Energy equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, route the cable separately from high-power lines and avoid tight bends. Also check the connector type, network category, and usable length between devices before sealing cable passages.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723853128020,"sku":"ASS030064980","price":11.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506618397012-1000.jpg?v=1783602595"},{"product_id":"victron-energy-cable-ve-direct-3m","title":"VE.Direct Cable 3m","description":"\u003cp\u003e\u003cstrong\u003eVE.Direct Cable 3m\u003c\/strong\u003e is a ve.direct cable designed for data or Ethernet connectivity aboard. It complements an existing installation or replaces a worn cable while maintaining a reference compatible with marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet is linked to the Marine Data\/Ethernet Network category. Length specified: 3 m. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact Victron Energy equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, route the cable separately from high-power lines and avoid tight bend radii. Also check the connector type, network category, and usable length between devices before closing cable passages.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723853783380,"sku":"ASS030530230","price":14.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c5d4afe6-e600-40a0-a086-ae72fa04d0c5.jpg?v=1779306478"},{"product_id":"amphenol-cables-ethernet-reseau-utp-slim-cat6-28awg-noir-5ft","title":"5FT Black UTP Slim CAT6 28AWG Ethernet\/Network Cable","description":"\u003cp\u003e\u003cstrong\u003eUTP SLIM CAT6 28AWG black 5FT Ethernet\/network cables\u003c\/strong\u003e are designed for data or Ethernet connections aboard. They complement an existing installation or replace a worn cable while maintaining a reference compatible with marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis datasheet is linked to the Marine Data Network\/Ethernet family. Length indicated: 5 ft. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact AMPHENOL equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, route cables separately from high-power lines and avoid tight bend radii. Also check the connector type, network category, and usable length between devices before sealing cable passages.\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"","offer_id":53723874427220,"sku":"MP-64RJ4528GK-005","price":10.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506635174228-1000.jpg?v=1783617752"},{"product_id":"amphenol-cables-ethernet-reseau-utp-slim-cat6-28awg-rouge-7ft","title":"7FT Red UTP Slim CAT6 28AWG Ethernet\/Network Cable","description":"\u003cp\u003e\u003cstrong\u003eUTP SLIM CAT6 28AWG red Ethernet\/network cable 7FT\u003c\/strong\u003e is an Ethernet cable designed for data or Ethernet linking aboard. It complements an existing installation or replaces a worn cable while maintaining a reference suitable for marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet is part of the Marine Data Network\/Ethernet family. Length indicated: 7 ft. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact AMPHENOL equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, route the cable separately from high-power lines and avoid tight bend radii. Also check the connector type, network category, and usable length between equipment before closing cable passages.\u003c\/p\u003e","brand":"Skysat","offers":[{"title":"","offer_id":53723874591060,"sku":"MP-64RJ4528GR-007","price":9.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506635338068-1000.jpg?v=1783617759"},{"product_id":"auxicom-cable-ethernet-marine-cat6a-bl","title":"Black\/blue ethernet cable 4Px26\/7AWG","description":"\u003cp\u003e\n    The AUXICOM CATLine CAT 6A BL \u003cstrong\u003eEthernet cable\u003c\/strong\u003e, part number 16474621, is designed for demanding industrial and marine Ethernet applications. This halogen-free cable, with a 4x2x26\/7AWG construction, provides a reliable networking solution for modern embedded systems. It features a special black polymer jacket resistant to marine environments, and a shielding combining an aluminum foil and a tinned copper braid, ensuring optimal signal integrity.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    The AUXICOM CATLine CAT 6A BL cable meets high-frequency transmission and electrical requirements with a characteristic impedance of 100Ω ± 10Ω, in accordance with EN 50288-10-2 for CAT 6A cables. It supports a maximum operating voltage of 90 V and a UL voltage of 300 V, with a core-to-core and core-to-screen test voltage of 2000 V. Its design ensures good flexibility, with a minimum bending radius of 5xd in fixed installation and 10xd in flexible applications.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Environment Resistance\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is specifically suited for marine use thanks to its resistance properties. It is halogen-free per IEC 60754-1 and VDE 0482-754-1, flame-retardant and self-extinguishing per IEC 60332-1-2, and does not propagate flame per IEC 60332-3-22 Cat. A. Additionally, it does not emit corrosive combustion gases (IEC 60754-2) and has low smoke density (IEC 61034). With a temperature range of -40\/+70 °C in fixed installation and -30\/+70 °C in flexible applications, it delivers stable performance across varied conditions, from -30°C to +75°C (UL). Compared to CATLine CAT 5e BL cables, the CAT 6A BL model offers increased bandwidth and better immunity to interference, positioning it as a standard suited to current marine network needs, while providing a balanced alternative to CATLine CAT 7A BL cables, which may be oversized for some applications.\n\u003c\/p\u003e","brand":"Auxicom","offers":[{"title":"Default Title","offer_id":53723890090324,"sku":"16474621","price":1.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/sab_official-16474621-main.png?v=1779298548"},{"product_id":"navico-cable-ethernet-7-6m","title":"Ethernet cable 7.6 m","description":"\u003cp\u003eThe Navico 000-0127-30 Ethernet cable, 7.6 meters in length, is a fundamental component for creating an integrated onboard navigation network. It allows for the connection of multifunction displays (MFDs), sonar modules, radars, and other compatible peripherals from Navico group brands, including B\u0026G, Lowrance, and Simrad.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-Speed Connectivity for Critical Data\u003c\/h3\u003e\n\u003cp\u003eThis cable ensures high-speed data transfer, essential for sharing critical real-time information such as charts, sonar views (including StructureScan and CHIRP), radar targets, waypoints, and routes between multiple displays. Unlike an NMEA 2000 connection designed for low-bandwidth data, the Ethernet network is optimized for large data streams, guaranteeing a smooth, latency-free image on all displays in the network.\u003c\/p\u003e\n\n\u003ch3\u003eRobust and Standardized Marine Design\u003c\/h3\u003e\n\u003cp\u003eThe cable is equipped with the 5-pin yellow connector, the standard used for all Navico Ethernet networks. This connector is specifically designed for the marine environment, offering a secure and waterproof connection for maximum reliability against vibration and corrosion. The 7.6-meter (25-foot) length provides sufficient flexibility for most installations on small to medium-sized boats, allowing connection from a helm station to a radar radome on a radar arch or to a second navigation station.\u003c\/p\u003e","brand":"Navico","offers":[{"title":"","offer_id":53723891335508,"sku":"000-0127-30","price":70.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_8f5a977c-7deb-4190-987f-aa15f2304c02.png?v=1772639467"},{"product_id":"navico-cable-ethernet-5-broches-male-vers-rj45-femelle-2m","title":"Yellow 5-pin male to RJ45 female Ethernet cable, 2 m","description":"\u003cp\u003eThe Navico 000-0127-56 Ethernet adapter cable is an essential connectivity solution for interfacing Navico proprietary marine navigation systems with standard computer equipment. With a length of 2 meters, it converts the 5-pin yellow marine Ethernet connector, used on most Simrad, Lowrance, and B\u0026G devices, into a standard female RJ45 port.\u003c\/p\u003e\n\n\u003ch3\u003eNetwork Integration and Diagnostics\u003c\/h3\u003e\n\u003cp\u003eThis cable is specifically designed for applications such as direct software updates from a computer, network diagnostics, or advanced instrument configuration. It eliminates the need to transfer files via memory cards by creating a direct link between an MFD (multifunction display) and a PC. Unlike standard Navico Ethernet cables (ETHEXT series) used to connect marine equipment to each other, this adapter acts as a bridge to the external computer world.\u003c\/p\u003e\n\n\u003ch3\u003eComparison with Competing Solutions\u003c\/h3\u003e\n\u003cp\u003eWhile brands like Garmin (Garmin Marine Network) and Raymarine (RayNet) also offer their own adapters to RJ45, the Navico 000-0127-56 model is unique with its 5-pin yellow connector, ensuring perfect compatibility and easy identification within the Navico ecosystem. The female RJ45 port allows the use of any standard Ethernet cable length to reach a remote router or computer, offering maximum flexibility. It should be noted that the RJ45 connection must be made in a dry and protected environment, as it does not offer the waterproofing of the 5-pin marine connector.\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723891466580,"sku":"000-0127-56","price":35.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_21758304-0880-4a19-9709-9a3f0c6fd4cd.webp?v=1772639337"},{"product_id":"navico-cable-ethernet-4-5m-5-broches-marin","title":"Ethernet cable 4.5m (15ft)","description":"\u003cp\u003e\n    The Navico 4.5-meter (15-foot) Ethernet cable is a critical component for reliable interconnection of your marine electronics. Designed specifically for marine Ethernet networks, this yellow cable features 5-pin male-to-male connectors, ensuring compatibility with Navico systems, including Lowrance, Simrad, and B\u0026G.\n\u003c\/p\u003e\n\u003ch3\u003eRobust Marine Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This cable enables fast and continuous data transfer, essential for communication between devices connected on a network. Its construction incorporates high-quality materials such as plastic, rubber, and copper, providing resistance to moisture and solvents. This design ensures durable performance even in demanding marine environments.\n\u003c\/p\u003e\n\u003ch3\u003eSimplified Integration and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With its plug-and-play design, installation of the Navico Ethernet cable is straightforward, enabling quick networking of devices. It is intended for connecting end devices within a network, and as an Ethernet extension cable, it allows integration of various NMEA-certified sensors, such as fishfinders, GPS units, and multifunction displays, for shared data display across the network.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56047590244692,"sku":"000-0127-29","price":46.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lowrance-cable-ethernet-4-5m-15ft_000-0127-29-01.jpg?v=1780869418"},{"product_id":"navico-nmea-0183-interface-convertisseur","title":"NMEA 0183 Interface","description":"\u003cp\u003e\n    Navico’s NMEA 0183 interface, part number \u003cstrong\u003e000-15939-001\u003c\/strong\u003e, provides bidirectional communication between NMEA 2000® networks and NMEA 0183 devices. This converter enables existing NMEA 0183 equipment to integrate into a NMEA 2000® network or adds new NMEA 0183 devices to an existing NMEA 2000® infrastructure. It offers a solution for modernizing marine electronic systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eDetailed Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This device operates on a 12 V DC power supply with an operating voltage range of 9 V DC to 18 V DC. Power consumption is 0.48 W (40 mA at 12 V), equivalent to 2 LEN. It includes reverse-polarity protection. The interface supports configurable baud rates: 4,800 (default), 9,600, 19,200, 38,400, 57,600, and 115,200.\n\u003c\/p\u003e\n\u003cp\u003e\n    Designed for marine environments, the interface features IP67 waterproofing and operates in temperatures from -15 °C to +55 °C. Weight is 0.1 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The interface complies with NMEA 0183 version 4.1 and meets CE (EMC Directive 2014\/30\/EU) and UKCA (Electromagnetic Compatibility Regulations 2016) standards, having been tested to EN 60945:2002 – Sections 9 \u0026 10. It is compatible with multifunction displays (MFD) and instrument displays from Lowrance®, Simrad®, and B\u0026G®. The device allows filtering of NMEA 0183 sentences in transmission\/reception and configurable transmission frequency via compatible Navico® displays.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56047687205204,"sku":"000-15939-001","price":164.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lowrance-nmea-0183-interface_000-15939-001-01.webp?v=1780872503"},{"product_id":"simrad-autopilot-gateway-volvo-evc-ips","title":"AUTOPILOT GATEWAY FOR VOLVO","description":"\u003cp\u003e\n    Designed specifically for integrating Volvo Penta EVC and IPS steering systems, the \u003cstrong\u003eSimrad AUTOPILOT GATEWAY FOR VOLVO\u003c\/strong\u003e gateway (part number 000-15597-002) is an interface that enables Simrad autopilot systems, such as the NAC-D, SG05, AP24, and AP28 processors, to communicate with engine controls. This device ensures digital data transmission and power distribution within the autopilot system and with other Simrad Yachting products.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Key Features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAUTOPILOT GATEWAY FOR VOLVO\u003c\/strong\u003e acts as a steering computer. It is approved by Volvo Penta, guaranteeing compatibility and optimal operation with their EVC\/IPS systems. The module supports high-speed data transfer for integrated steering and navigation systems. It features two SimNet ports for proprietary network communication, with a SimNet network load (NL) factor of 2.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical and Environmental Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This gateway is powered at 12V via SimNet and has a power consumption of 0.9W. Its IP44 rating ensures resistance to water spray, making it suitable for mounting in a bulkhead onboard. The device is compatible with the NMEA 2000 network and weighs approximately 0.59 kg. It is required for connecting Simrad autopilot processors (NAC-D or SG05) to Volvo EVC and IPS controls, replacing the previous model 000-15597-001. Note that this product is a discontinued reference with potentially limited availability.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049687232852,"sku":"000-15597-002","price":2675.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/web-autopilot-gateway-for-volvo_000-15597-002-01.jpg?v=1780914999"},{"product_id":"navico-cable-ethernet-0-6m-5-broches-jaune","title":"Ethernet cable 0.6 m (2 ft)","description":"\u003cp\u003e\n    The Navico Ethernet cable 0.6 m (2 ft) is designed for extending and optimizing marine data networks. This cable provides a stable and reliable connection between compatible navigation devices, essential for the integrity of your system. Its 0.6-meter length allows for short and precise connections, optimizing space management on board.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and extended compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is specifically equipped with 5-pin male-to-male yellow connectors, a characteristic of Navico networks. It is compatible with displays and devices from Lowrance, Simrad, and B\u0026G brands that feature 5-pin yellow Ethernet ports. This compatibility ensures direct and seamless integration into an existing Navico ecosystem, facilitating the interconnection of chartplotters, fishfinders, and radars.\n\u003c\/p\u003e\n\n\u003ch3\u003eNetwork integration and performance\u003c\/h3\u003e\n\u003cp\u003e\n    Using this Ethernet cable allows you to establish or extend a dedicated Ethernet network for navigation, ensuring smooth and high-speed data transfer. It is a key component for implementing a coherent and high-performance navigation system capable of managing critical information flows between your boat's various electronic modules.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56050000691540,"sku":"000-16144-001","price":21.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495267451220-1000.jpg?v=1783619975"},{"product_id":"furuno-cable-radar-ethernet-alimentation-15m","title":"15M FRU-2P5S-FF-15M-A Cable FURUNO radar Ethernet\/power cable 15m (Multiposte RDP-157 (MOD","description":"\u003cp\u003e\n    The FURUNO FRU-2P5S-FF-15M-A 15-meter cable is an integrated solution for connecting marine radar systems. It combines power supply and Ethernet data transmission within a single cable, simplifying installation and cable management on board.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is specifically designed for optimal compatibility with a wide range of Furuno radar systems. It supports DRS (Digital Radar Sensor) radar sensors as well as NavNet 3D multi-station displays. Compatible models include the Multiposte RDP-157 (MODEL1815), and the DRS4DL+, DRS4DNXT, DRS6ANXT, DRS12A-NXT, DRS25A-NXT, DRS6A_XCLASS, DRS12A-XCLASS, and DRS25A-XCLASS radar units.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Design\u003c\/h3\u003e\n\u003cp\u003e\n    FURUNO’s FRU-2P5S-FF-15M-A cable is a \"siamese\" type cable, integrating both data and power lines. The data section (Ethernet) is fitted with RJ45 connectors at both ends for standardized network connections. The power section uses a 3-pin connector for the display unit, while the end intended for the radar sensor (DRS) is typically supplied without a connector, allowing for custom termination based on installation requirements. Manufactured with materials suited for marine environments, this cable is designed to withstand demanding offshore conditions.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56071909409108,"sku":"00151262000","price":135.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15499822432596-1000.jpg?v=1783603702"},{"product_id":"furuno-cable-radar-ethernet-alimentation-20m","title":"Cable 20M FRU-2P5S-FF-20M-A Radar Ethernet\/Power Cable 20m (Multipost RDP-157 (MOD","description":"\u003cp\u003e\n    Designed for integrating Furuno radar systems, the \u003cstrong\u003eFRU-2P5S-FF-20M-A\u003c\/strong\u003e 20-meter cable is a connectivity solution that combines Ethernet and power lines. This cable is an essential component for linking Furuno radar sensors to their chartplotters.\n\u003c\/p\u003e\n\u003ch3\u003eIntegrated and Simplified Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The cable integrates data and power functionalities into a dual-cable design, often referred to as \"Siamese.\" This architecture enables simultaneous transmission of data and power, reducing cable clutter and simplifying installation. The Ethernet section uses connectors at both ends for quick and standardized connection. For power, a connector is present on the chartplotter side, while the radar sensor end (DRS) is designed for on-site termination, allowing for custom and watertight installation.\n\u003c\/p\u003e\n\u003ch3\u003eExtended Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is compatible with a wide range of Furuno radars, including DRS4DL, DRS4DL+, DRS4DNXT, DRS6ANXT, DRS12A-NXT, DRS25A-NXT, DRS6A_XCLASS, DRS12A-XCLASS, and DRS25A-XCLASS models. It is also suitable for the RDP-157 multipost (MODEL1815). The connectors are designed to ensure reliable and robust connections in marine environments. The cable also supports multipost configurations for the RDP-157 (MODEL1815) chartplotter, allowing up to three chartplotters to connect to a single antenna via an Ethernet hub.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56071920288084,"sku":"00151264000","price":190.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15499824693588-1000.jpg?v=1783603707"},{"product_id":"furuno-kit-dgps-op20-56-antenne-gp021s-gp170","title":"DGPS kit OP20-56 with GP021S antenna for GP170","description":"\u003cp\u003e\n    Designed for professional navigation, the \u003cstrong\u003eFURUNO DGPS kit OP20-56 with GPA021S antenna\u003c\/strong\u003e is a precision augmentation solution for the GP-170 GNSS navigator. This kit enables the GP-170 to operate in DGNSS (Differential Global Navigation Satellite System) mode, providing enhanced stability and reliability for merchant ships, large yachts, ferries, and commercial vessels.\n\u003c\/p\u003e\n\n\u003ch3\u003eGNSS Precision and Reception\u003c\/h3\u003e\n\u003cp\u003e\n    The GP-170 system, enhanced by this kit, integrates a new GPS circuit and the GPA-021S antenna, ensuring improved positioning accuracy. It is compatible with GPS, GLONASS, DGNSS, SBAS (Satellite-Based Augmentation System), and SLAS (Sub-meter Level Augmentation Service) systems. The GPA-021S antenna is designed for better noise rejection and high tolerance to multipath fading, enabling position updates at 10 Hz (every 0.1 seconds) for stable vessel tracking. The GPA-021S antenna weighs approximately 1 kg and is typically supplied with a 10-meter cable.\n\u003c\/p\u003e\n\n\u003ch3\u003eGP-170 Display and User Interface\u003c\/h3\u003e\n\u003cp\u003e\n    The GP-170 features a 5.7-inch color LCD screen with a VGA resolution of 640 x 480 pixels and a brightness of 700 cd\/m². It offers seven different display modes, including two customizable ones, for clear visualization of navigation data. The GP-170’s memory capacity allows storage of 10,000 waypoints, 100 routes, and 3,000 tracks. It includes a front USB port for routing data and parameter import\/export, as well as an IEC 61162-450 compliant LAN interface for efficient network integration within a bridge system.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    The GP-170 provides extensive connectivity with four NMEA0183 ports, one Ethernet port, and one USB port. It supports Bridge Alert Management (BAM) alerts per IMO MSC.302 (87) and complies with IMO performance standards, including IACS UR E27, IMO MSC.112 (73) for GPS, MSC.113 (73) for GLONASS, MSC.114 (73) and IEC 61108-4 for DGNSS. The system supports dual configuration for backup needs, enabling navigation data sharing between units. It serves as a position sensor for other navigation and communication equipment such as radar, AIS, ECDIS, autopilot, and fishfinder.","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084175389012,"sku":"00003925100","price":744.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15502235894100-1000.jpg?v=1783604502"},{"product_id":"furuno-p5e-4ptx-bl-cordon-reseau-2m-rj45-fa40-fa70","title":"P5E-4PTX-BL L=2M Network Cable 2m RJ45\/RJ45 (FA40\/FA70)","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO P5E-4PTX-BL L=2M\u003c\/strong\u003e network cable is a 2-meter Ethernet cable designed for marine installations, ensuring reliable connectivity between Furuno equipment. This shielded (STP) Cat5e cable features modular RJ45 connectors on each end, simplifying integration into onboard networks.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Specifically developed for Furuno navigation systems, the P5E-4PTX-BL L=2M is compatible with AIS transponders FA-40 and FA-70, as well as NavNet VX2 systems. Its 4-pair design ensures stable and secure data transmission, critical for communication between multifunction displays and marine network hubs.\n\u003c\/p\u003e\n\u003ch3\u003eRobust Design and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Constructed with 26 AWG (0.13 mm²) stranded copper conductors, this cable is built to withstand marine environments. Its outer jacket is LSZH (Low Smoke Zero Halogen), providing enhanced safety in case of fire due to reduced smoke and toxic gas emissions. The cable operates within a temperature range of -20 to 60 °C and complies with RoHS 2011\/65\/EU directive.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084176568660,"sku":"00016463410","price":52.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix_ae04f33a-dd12-40ef-8b0b-cd3f45ec2e82.jpg?v=1783507517"},{"product_id":"furuno-tl-cat-012-raccordement-rallonge-cable-reseau-rj45-ethernet","title":"TL-CAT-012 RJ45 network cable extension connector (TL-CAT-012) for Ethernet network cables","description":"\u003cp\u003e\n    Designed to extend the range of Ethernet network cables, the \u003cstrong\u003eFURUNO TL-CAT-012\u003c\/strong\u003e is an RJ45 extension connector intended for marine installations. This accessory enables reliable extension of LAN cables in various Furuno navigation systems.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eTL-CAT-012\u003c\/strong\u003e connector facilitates the extension of RJ45 network cables, ensuring continuous connectivity for Furuno equipment. It is specifically used with the Furuno NavNet TZTouch series, Furuno multifunction displays (MFD), and radar sensors from the DRS-NXT and X-Class series. Its design makes it a supplementary component for extending existing LAN cables, such as the MOD-Z072.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation Advice\u003c\/h3\u003e\n\u003cp\u003e\n    To ensure optimal performance and durability in a marine environment, it is recommended to seal the connection of the \u003cstrong\u003eTL-CAT-012\u003c\/strong\u003e connector with vinyl tape after assembly. This measure provides protection against moisture and marine elements, extending the lifespan of the network installation.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084177584468,"sku":"00016714010","price":14.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15502237204820-1000.jpg?v=1783620587"},{"product_id":"furuno-mod-z072-020-cable-reseau-rj45-4-paires-2m","title":"MOD-Z072-020+ Ethernet cable RJ45 \u003c-\u003e RJ45 4 pairs - 2m","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO MOD-Z072-020+\u003c\/strong\u003e Ethernet cable is a connectivity solution designed specifically for Furuno marine electronic systems. With a length of 2 meters, it ensures reliable interconnection of equipment within an onboard network.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This cable features RJ45 connectors at each end, ensuring compatibility with standard LAN ports found on many Furuno devices. Its 4-pair wire configuration is suited for Ethernet data transmission, essential for the proper operation of navigation and communication systems at sea. It is identified by the manufacturer part number MOD-Z072-020+.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and applications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO MOD-Z072-020+\u003c\/strong\u003e is compatible with Furuno NavNet 3D systems, as well as a variety of other Furuno marine electronic devices requiring a LAN connection. This includes multifunction displays (MFD), radar sensors, and other networked devices. It is designed to facilitate the establishment of a stable network onboard vessels.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084183515476,"sku":"00116788010","price":46.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix_0e378c1e-5677-4b64-9da4-eda97ca4d875.jpg?v=1783507449"},{"product_id":"furuno-cable-reseau-rj45-4-paires-10m","title":"MOD-Z072-100+ RJ45 \u003c-\u003e RJ45 network cable 4 pairs - 10m","description":"\u003cp\u003e\n    The \u003cstrong\u003eFuruno MOD-Z072-100+ network cable\u003c\/strong\u003e is an Ethernet connectivity solution designed for Furuno marine electronics systems. With a length of 10 meters and a 4-pair construction, this RJ45-to-RJ45 cable facilitates the extension of onboard network infrastructures.\n\u003c\/p\u003e\n\n\u003ch3\u003eExtended connectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is compatible with a wide range of Furuno equipment, including NavNet VX1, VX2, and 3D systems. It supports communication between multifunction displays (MFDs) such as the FEA-2100, FEA-2105, DCU12, DCU8, MFD8, and MFD12, as well as network sounders DFF3 and DFF1. The \u003cstrong\u003eMOD-Z072-100+\u003c\/strong\u003e can also be used with the HUB-101 Ethernet hub and various marine radars, including the FAR-2167DS, 2167DS-BB, and 2167DS-D.\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecific applications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFuruno MOD-Z072-100+ network cable\u003c\/strong\u003e is a crossover LAN cable suitable for extending Ethernet radar connections. It is compatible with DRS2D, DRS4D, DRS4A, DRS6A, DRS12A, and DRS25A radar sensors. For specific configurations, such as with the DFF3-UHD network fishfinder, it can be used in combination with the TL-CAT-012 junction box.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084184400212,"sku":"00116790010","price":83.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix.jpg?v=1783507428"},{"product_id":"furuno-mod-z072-050-cable-reseau-rj45-5m-marine","title":"MOD-Z072-050+ RJ45 to RJ45 4-pair network cable - 5m","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eFURUNO MOD-Z072-050+\u003c\/strong\u003e is a 5-meter Ethernet network cable. This RJ45 to RJ45 cable features a 4-pair shielded twisted-pair construction, ensuring reliable data transmission and reduced interference in marine navigation and communication systems. Its outer jacket is designed to withstand abrasion, UV rays, corrosion, impacts, and moisture, ensuring extended durability at sea.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and extended compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMOD-Z072-050+\u003c\/strong\u003e cable provides plug-and-play connectivity, requiring no crimping tools for installation. It is specifically designed for a wide range of Furuno systems, including the NavNet VX1, VX2, 3D, 3X, and TZTouch series. It enables these systems to connect to a PC and extend Ethernet radar connections. Its compatibility extends to multifunction displays (MFD8, MFD12), network sounders (DFF3, DFF1), Ethernet hubs (HUB-101), and marine radars (FAR-2167DS, 2167DS-BB, 2167DS-D) from Furuno.\n\u003c\/p\u003e\n\n\u003ch3\u003eNetwork performance\u003c\/h3\u003e\n\u003cp\u003e\n    Thanks to its shielded twisted-pair design and high-quality RJ45 connectors, this Ethernet cable supports Gigabit speeds. This capability ensures low latency, essential for critical applications such as real-time chart plotting and radar overlays, optimizing onboard network performance.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084186235220,"sku":"00116789010","price":68.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix_d2d3422e-2161-47b3-8dcd-1e882f2ff54a.jpg?v=1783508646"},{"product_id":"furuno-cable-lan-10m-marine-etanche-non-etanche","title":"00164702000 — 10m LAN Cable - WATERPROOF - non-WATERPROOF","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eFURUNO 10m LAN cable\u003c\/strong\u003e (part number 00164700000) ensures reliable network connectivity for NavNet TZtouchXL systems. This 10-meter cable is specifically engineered to deliver stable and fast data transmission, essential for modern navigation equipment. It is optimized for Furuno multifunction displays and NavNet TZtouchXL systems, allowing connection between two TZtouchXL units or linking a unit to a network hub.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Marine-Grade Construction\u003c\/h3\u003e\n\u003cp\u003e\n    The FURUNO 10m LAN cable features marine-grade durability with shielding to counteract electromagnetic interference (EMI) generated by other onboard electronic equipment. Its precision-molded ends provide a secure fit resistant to weather conditions, designed to withstand vibrations, salt spray, and constant flexing. The cable also includes a low-smoke jacket, enhancing safety in confined boat spaces.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimal and Secure Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is equipped with a waterproof RJ45 connector and a non-waterproof RJ45 connector, offering flexibility for various installation setups. It delivers consistent performance and reliability even in harsh marine conditions. The \u003cstrong\u003eFURUNO 10m LAN cable\u003c\/strong\u003e supports high-speed data exchange, critical for real-time navigation, AIS tracking, and radar overlays, ensuring responsive and integrated marine electronic systems. It facilitates communication and data transfer between Furuno marine electronics components such as radars, chartplotters, and fishfinders.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089237356884,"sku":"00164700000","price":116.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix_f5e88ea6-a664-4373-ada5-3a25d93faee6.jpg?v=1783507552"},{"product_id":"furuno-cable-waterproof-rj45-ethernet-0-5m","title":"00020133610 — WATERPROOF RJ45 to RJ45 Ethernet Cable","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eFURUNO FE-WRJ-ADP-05M\u003c\/strong\u003e Ethernet cable is a waterproof RJ45-to-RJ45 connectivity solution. It provides reliable interconnection for FURUNO marine electronic systems.\n\u003c\/p\u003e\n\u003ch3\u003eRobust Marine Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is specifically engineered to maintain Ethernet network integrity onboard, even in the presence of moisture, saltwater, and dirt. Its waterproof design ensures stable and secure data transmission, essential for navigation and communication equipment. The \u003cstrong\u003eFE-WRJ-ADP-05M cable\u003c\/strong\u003e can connect various devices, including FURUNO Ethernet hubs HUB102 and other NavNet TZtouch-compatible systems.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    With a length of 0.5 meters, the \u003cstrong\u003eWATERPROOF 0.5M Ethernet cable\u003c\/strong\u003e fits installations requiring a short, protected connection. Made with marine-grade materials, it is built to withstand harsh offshore conditions, ensuring long-term durability and performance for your onboard network.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089249612116,"sku":"FE-WRJ-ADP-05M","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix_2c38f122-3fc4-41bd-908a-c0f9a4d1c3f3.jpg?v=1783507584"},{"product_id":"furuno-cable-reseau-rj45-poe-3m","title":"RJ45 network cable \u003c-\u003e RJ45 2-pair (PC\/HUB POE connection) - 3m","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO 3-meter RJ45 \u0026lt;-\u0026gt; RJ45 2-pair network cable\u003c\/strong\u003e is designed for reliable data transmission in demanding marine environments. Equipped with RJ45 connectors at both ends and configured with 2 pairs of wires, it is specifically suited for connections to computers or Power over Ethernet (POE) hubs.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Marine-Grade Construction\u003c\/h3\u003e\n\u003cp\u003e\n    This \u003cstrong\u003eFURUNO\u003c\/strong\u003e network cable features a marine-grade construction to ensure stable Ethernet connectivity even in harsh conditions. Its double shielded design reduces electromagnetic interference common aboard vessels, while gold-plated RJ45 connectors provide corrosion resistance and optimal signal integrity.\n\u003c\/p\u003e\n\n\u003ch3\u003eSecure and Durable Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The RJ45 connectors feature IP-rated protection against saltwater spray and vibrations, ensuring secure and durable connections. The UV-stabilized cable jacket offers both flexibility and robustness to withstand sun exposure and movement at sea, guaranteeing reliable performance without signal loss.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089251676500,"sku":"00158889000","price":44.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix_5729352e-2788-44ee-932d-877d9c641ce2.jpg?v=1783507468"},{"product_id":"furuno-cordon-reseau-10m-rj45-p5e-4ptx-bl","title":"00016463710 — P5E-4PTX-BL L=10M Network cable 10m RJ45\/RJ45 (FA40\/FA70)","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO P5E-4PTX-BL L=10M\u003c\/strong\u003e network cable is a 10-meter Ethernet cable designed for interconnections within Furuno marine electronic systems. This LAN-type cable, often identified as CAT5, is equipped with RJ45 connectors at each end, ensuring a standardized and reliable connection.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Functionality\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is specifically developed to ensure compatibility and optimal performance with a range of Furuno equipment. It is compatible with AIS transceivers\/receivers from the FA-30, FA-40, and FA-50 series. Additionally, it integrates with NavNet VX2, NavNet 3D navigation systems, as well as NavNet TZtouch, TZtouch2, and TZtouch3 multifunction displays and navigation systems.\n\u003c\/p\u003e\n\u003cp\u003e\n    The primary function of the \u003cstrong\u003eP5E-4PTX-BL L=10M\u003c\/strong\u003e network cable is to facilitate the exchange of navigation data and other critical information between connected devices. This contributes to improved situational awareness and safer offshore navigation by ensuring smooth and stable communication within the onboard network.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089259245908,"sku":"00159264000","price":88.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix_5f8e9339-e874-4c8d-a97e-d808ec9e9c9c.jpg?v=1783507500"},{"product_id":"furuno-cable-lan-5m-waterproof-001-646-980-00","title":"00164700000 — 5m LAN Cable - WATERPROOF - non WATERPROOF","description":"\u003cp\u003e\n    Designed for Furuno marine networks, the \u003cstrong\u003eFuruno 5m LAN cable (001-646-980-00)\u003c\/strong\u003e provides reliable Ethernet connectivity aboard. This cable is compatible with NavNet TZtouch3, TZT3, and NavNet systems, enabling integration of chartplotters, radars, fishfinders, and cameras. Its dual-connector design allows connection of equipment in both dry and wet areas of the vessel.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust and Versatile Marine Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The Furuno 5m LAN cable features a waterproof male RJ45 connector at one end, rated IPX6\/IPX7 for exposed environments such as the deck. The other end has a standard male RJ45 connector, suitable for connections in the console or dry areas. This setup provides a solution for wiring systems in various marine spaces, from the helm to exterior locations. The cable supports 10\/100\/1000Base-T Ethernet with data rates up to 1 Gbps.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    With Cat5e\/6 cabling, the cable ensures efficient data transmission for high-bandwidth marine applications. It includes EMI shielding to maintain signal integrity and minimize electromagnetic interference. The T568B \"straight-through\" pinout is used for full-duplex operation. This cable operates in a temperature range from -15°C to 55°C. Its 5m length is suitable for cabling runs on mid-sized vessels, supporting functions such as radar overlays, AIS targets, and video streams.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56097760182612,"sku":"00164698000","price":103.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix_e6c467bc-dc73-4784-b511-5d7503f9d20a.jpg?v=1783507534"},{"product_id":"furuno-cable-jumper-0-5m-hub102-reseau","title":"00020133610 — 5m jumper cable for connecting multiple HUB102 hubs","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO HUB-102-JMP\u003c\/strong\u003e jumper cable is designed for interconnecting multiple Furuno HUB102 units. This 0.5-meter cable facilitates the extension of marine electronic systems’ network capabilities by ensuring a reliable and direct connection between hubs.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a length of 0.5 meters, the \u003cstrong\u003eHUB-102-JMP jumper cable\u003c\/strong\u003e is suited for installations where HUB102 units are positioned close to one another. It integrates into a Furuno NavNet TZtouch network or other compatible systems, using connections such as NMEA 2000 or Ethernet, depending on the HUB102 architecture.\n\u003c\/p\u003e\n\n\u003ch3\u003eOriginal FURUNO Accessory\u003c\/h3\u003e\n\u003cp\u003e\n    As an original Furuno accessory, this jumper cable guarantees optimal compatibility and performance with HUB102 hubs. It enhances the stability and efficiency of data communication between the various nautical equipment connected to the network.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56097809989972,"sku":"FE-HUB-102-JMP","price":44.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix_b9e31fc2-c381-4bb1-9cef-07c5f92381f9.jpg?v=1783507568"},{"product_id":"furuno-cable-liaison-ethernet-6pf-vers-rj45-5m","title":"Ethernet cable 6PF \u003c-\u003e RJ45 2 pairs - 5m","description":"\u003cp\u003e\n    The \u003cstrong\u003eFuruno Ethernet cable 6PF \u0026lt;-\u0026gt; RJ45 2 pairs, 5m long\u003c\/strong\u003e is designed to provide reliable network connectivity for marine navigation systems, including NavNet networks. This 5-meter cable features a female 6-pin connector (6PF) at one end and a standard RJ45 connector at the other, enabling easy integration of Furuno equipment with compatible Ethernet devices.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and marine robustness\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is specifically engineered for demanding marine environments. Its construction incorporates durable materials resistant to salt exposure, UV rays, and constant vibrations. It is wired with 2 pairs, making it suitable for 10\/100Base-TX Ethernet connections, ensuring stable and fast data transfer. This design allows real-time updates of charts, sonar overlays, and radar images within a Furuno NavNet network.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    With its optimized connectors and technical design, the \u003cstrong\u003eFuruno 00158882000\u003c\/strong\u003e cable facilitates the connection of multifunction displays, radars, fishfinders, and other NavNet-compatible equipment to a PC or other network components via an RJ45 port. Its plug-and-play nature aims to minimize installation and maintenance time. The cable features a robust outer sheath to resist abrasion and secure connectors to prevent accidental disconnections at sea.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56097840464212,"sku":"00158882000","price":111.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cablefix_1dc00d86-f774-4b93-a476-0432965f5c0f.jpg?v=1783507484"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/ethernet.png?v=1774455797","url":"https:\/\/skysat.fr\/en-gb\/collections\/ethernet.oembed","provider":"Skysat","version":"1.0","type":"link"}