{"title":"Interfaces \u0026 Gateways","description":"\u003ch2\u003eInterfaces \u0026 bridges: making onboard networks communicate\u003c\/h2\u003e\n\u003cp\u003eAn interface or bridge translates data between two devices, two protocols or two networks. It is used to retrieve engine data, convert an NMEA stream, connect a computer, add Wi‑Fi monitoring or link an energy system to a control network.\u003c\/p\u003e\n\n\u003ch3\u003eNavigation, engine and NMEA\u003c\/h3\u003e\n\u003cp\u003eTo integrate engine and control data into the Raymarine ecosystem, the \u003ca href=\"\/en-gb\/products\/raymarine-interface-moteur-controle-universelle-eci-100\"\u003eECI-100 Universal Engine \u0026 Control Interface\u003c\/a\u003e links compatible networks. The \u003ca href=\"\/en-gb\/products\/raymarine-interface-nmea-sans-fil-t122\"\u003ewireless NMEA interface\u003c\/a\u003e, the \u003ca href=\"\/en-gb\/products\/raymarine-kit-convertisseur-stng-nmea183-vhf\"\u003eSTNG to NMEA183 VHF converter kit\u003c\/a\u003e, the \u003ca href=\"\/en-gb\/products\/raymarine-convertisseur-devicenet-nmea-0183\"\u003eDeviceNet to NMEA 0183 converter\u003c\/a\u003e and the \u003ca href=\"\/en-gb\/products\/raymarine-t12217-kit-cables-interface-nmea2000-cablage\"\u003eNMEA2000 Kit\/interface cables\u003c\/a\u003e cover conversion and connection needs between network generations.\u003c\/p\u003e\n\n\u003ch3\u003eEnergy monitoring and Victron configuration\u003c\/h3\u003e\n\u003cp\u003eVictron interfaces are used to configure, monitor or connect energy equipment. The \u003ca href=\"\/en-gb\/products\/victron-energy-mk3-usb-c-interface-vebus\"\u003eMK3-USB-C VE.Bus to USB-C\u003c\/a\u003e and the \u003ca href=\"\/en-gb\/products\/victron-energy-ve-direct-usb-c-interface\"\u003eVE.Direct to USB-C interface\u003c\/a\u003e connect devices to a computer. The \u003ca href=\"\/en-gb\/products\/victron-energy-smart-dongle-bluetooth-vebus-capteur-batterie\"\u003eVE.Bus Smart dongle\u003c\/a\u003e and the \u003ca href=\"\/en-gb\/products\/victron-energy-ve-direct-bluetooth-smart-dongle-adaptateur\"\u003eVE.Direct Bluetooth Smart dongle\u003c\/a\u003e add a mobile connection. For monitoring, the \u003ca href=\"\/en-gb\/products\/victron-energy-cerbo-gx-mk2-hub-communication-marine\"\u003eCerbo GX MK2\u003c\/a\u003e, \u003ca href=\"\/en-gb\/products\/victron-energy-ekrano-gx-centre-communication-marine\"\u003eEkrano GX\u003c\/a\u003e, \u003ca href=\"\/en-gb\/products\/victron-energy-color-control-gx-tableau-commande-gestion-energie\"\u003eColor Control GX\u003c\/a\u003e and \u003ca href=\"\/en-gb\/products\/victron-energy-globallink-520-passerelle-4g-lte-m\"\u003eGlobalLink 520\u003c\/a\u003e centralize system information.\u003c\/p\u003e\n\n\u003ch3\u003eMasterBus, USB and extended network\u003c\/h3\u003e\n\u003cp\u003eOn the Mastervolt side, the \u003ca href=\"\/en-gb\/products\/mastervolt-interface-usb-masterbus-czone\"\u003eUSB MasterBus interface\u003c\/a\u003e and the \u003ca href=\"\/en-gb\/products\/mastervolt-interface-serie-masterbus-passerelle-communication\"\u003eMasterBus serial interface\u003c\/a\u003e are used for exchanges with external systems. The \u003ca href=\"\/en-gb\/products\/mastervolt-masterbus-repeater-reseau-etendue\"\u003eMasterBus repeater\u003c\/a\u003e extends the network, the \u003ca href=\"\/en-gb\/products\/mastervolt-pc-link-isolation-galvanique-rs232-rj12\"\u003ePC-LINK with galvanic isolation\u003c\/a\u003e secures serial links, and the \u003ca href=\"\/en-gb\/products\/mastervolt-interface-masterbus-convertisseur\"\u003eMasterBus converter interface\u003c\/a\u003e integrates compatible converters.\u003c\/p\u003e\n\n\u003ch3\u003eActisense gateways\u003c\/h3\u003e\n\u003cp\u003eThe Actisense gateways meet diagnostic and inter-network connection needs. The \u003ca href=\"\/en-gb\/products\/actisense-usg-2-interface-nmea0183-usb-marine\"\u003eUSG-2 NMEA0183 to USB interface\u003c\/a\u003e connects an NMEA 0183 stream to a computer, the \u003ca href=\"\/en-gb\/products\/actisense-w2k-1-interface-nmea2000-wi-fi-enregistreur\"\u003eNMEA2000 to Wi‑Fi interface\u003c\/a\u003e makes network data accessible wirelessly, and the \u003ca href=\"\/en-gb\/products\/actisense-interface-nmea2000-nmea0183-bidirectionnel\"\u003ebidirectional NMEA2000 \/ NMEA0183 interface\u003c\/a\u003e links the two standards.\u003c\/p\u003e\n\n\u003ch3\u003eTo check before installation\u003c\/h3\u003e\n\u003cp\u003eIdentify the protocols to convert, the direction of data flow, the physical connector, the supply voltage, galvanic isolation requirements, software compatibility and monitoring method. To complete the architecture, see the \u003ca href=\"\/en-gb\/collections\/data-switching\"\u003edata switching\u003c\/a\u003e, \u003ca href=\"\/en-gb\/collections\/modules-io\"\u003eI\/O modules\u003c\/a\u003e, \u003ca href=\"\/en-gb\/collections\/electricite\"\u003eelectrical\u003c\/a\u003e, \u003ca href=\"\/en-gb\/collections\/cablage-electricite\"\u003eelectrical cabling\u003c\/a\u003e and \u003ca href=\"\/en-gb\/collections\/capteurs\"\u003esensors\u003c\/a\u003e collections.\u003c\/p\u003e","products":[{"product_id":"actisense-interface-nmea2000-nmea0183-bidirectionnel","title":"Bidirectional NMEA2000 \/ NMEA0183 interface","description":"\u003cp\u003e\n    Designed for the integration of marine electronic systems, the Actisense AS0120 interface provides bidirectional conversion between NMEA 2000 and NMEA 0183 standards. This device enables older equipment operating on NMEA 0183 to communicate with modern NMEA 2000 networks, and vice versa. It can also serve as a PC interface for the NMEA 2000 network, offering versatility for onboard data management and diagnostics.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The Actisense AS0120 interface stands out for its ability to handle high data transfer rates up to 230,400 baud, ensuring smooth and fast communication of information. The bidirectional conversion supports a wide range of NMEA 0183 sentences and NMEA 2000 PGNs, including the transmission of fast heading data (Fast Heading) at 10 Hz and AIS messages. For power supply, ISO variants such as the AS0120 are directly powered by the NMEA 2000 bus, simplifying installation by eliminating the need for a dedicated external power source. The device complies with NMEA 2000 certification and meets IEC 61162-1 \u0026 61162-2 requirements.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobustness and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The AS0120 design features opto-coupled isolation for the NMEA 0183 input and an ISO-Drive™ output for NMEA 0183, complemented by galvanic isolation on the NMEA 2000 bus connection (CAN bus). This architecture protects connected equipment from ground loops and voltage surges. The housing meets IP67 waterproofing standards, making it resistant to water and suitable for marine environments. It operates within a temperature range of -25°C to +70°C. Advanced configuration, including the definition of transmit (Tx) and receive (Rx) lists and data rates, is performed via the Actisense Toolkit or NMEA Reader software. Diagnostic LEDs facilitate network status monitoring and data reception checks. The AS0120, identified as a version of Actisense’s NGW-1 or NGX-1 series, is compatible with all NMEA 0183 versions without specific configuration and supports RS422, RS232, RS485 listeners on the output and RS422, RS232 transmitters on the input. Free software updates are available to keep the device current.\n\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":53723735753044,"sku":"AS0120","price":325.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_038bf6d3-b2fd-4c3f-af28-1b5f6b059bd6.png?v=1779962309"},{"product_id":"actisense-w2k-1-interface-nmea2000-wi-fi-enregistreur","title":"NMEA2000 to Wi-Fi Interface","description":"\u003cp\u003e\n    Designed for modern sailing, the \u003cstrong\u003eActisense W2K-1\u003c\/strong\u003e interface is a compact NMEA 2000 to Wi-Fi gateway optimized for data transfer to mobile devices such as laptops, tablets, and smartphones. It stands out for its ability to function simultaneously as an integrated voyage data logger, offering a two-in-one solution for connectivity and marine data analysis.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Data Versatility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eW2K-1\u003c\/strong\u003e provides bidirectional conversion of NMEA 2000 to NMEA 0183 data, ensuring broad compatibility with a wide range of navigation software and applications. It also supports broadcasting NMEA 2000 and RAW CAN data via Wi-Fi, using up to three separate data servers (TCP and UDP). Its IEEE 802.11 b\/g\/n Wi-Fi module operates on the 2.4 GHz band, with a range of approximately 30 meters in open space and a throughput of up to 150 Mbps. For power, the device uses the NMEA 2000 bus, with an average consumption of 70 mA at 12 VDC (2 LEN).\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated Voyage Data Logging\u003c\/h3\u003e\n\u003cp\u003e\n    A major feature of the \u003cstrong\u003eActisense W2K-1\u003c\/strong\u003e interface is its voyage data logging function. Supplied with a preinstalled 8 GB industrial micro SD card, it can be expanded up to 128 GB. This capacity allows for approximately 16 days of navigation data recording, with battery life ranging from 4 to 100 days depending on network load and configured filtering options. This feature is particularly useful for post-navigation analysis, troubleshooting, or optimizing vessel performance, positioning the W2K-1 as a more complete alternative than Wi-Fi gateways alone, which lack native logging capabilities.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eW2K-1\u003c\/strong\u003e interface is housed in a rugged IP67-rated enclosure, providing protection against temporary immersion and dust, making it suitable for demanding marine environments. Its compact dimensions of 106 mm x 73 mm x 24 mm and weight of 80 g facilitate discreet integration. The device offers flexible Wi-Fi operation, acting as an access point or connecting to an existing network in client mode. Diagnostic LEDs provide visual feedback on NMEA 2000 bus activity and Wi-Fi status. The included Actisense-i diagnostic tools allow checking NMEA 2000 bus voltage and the status of connected devices, while firmware updates can be performed remotely.\n\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":53723736080724,"sku":"AS0110","price":222.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_6b952078-c449-47ab-a402-1ae31ab4c4e0.jpg?v=1779962286"},{"product_id":"actisense-usg-2-interface-nmea0183-usb-marine","title":"USG-2 NMEA0183 to USB interface","description":"\u003cp\u003e\n    Designed to ensure a reliable and secure connection between NMEA 0183, RS422, RS232 devices and a PC USB port, the \u003cstrong\u003eActisense USG-2\u003c\/strong\u003e interface converts a standard USB port into a bidirectional serial port compliant with marine requirements. This interface is particularly suited to applications requiring advanced electrical protection and broad compatibility with various equipment. It stands out from generic USB-to-serial converters due to its isolation level and robust design.\n\u003c\/p\u003e\n\n\u003ch3\u003eIsolation and Electrical Protection\u003c\/h3\u003e\n\u003cp\u003e\n    The USG-2 features 2500 V galvanic isolation for the input and 1500 V for the output, achieved through Actisense’s ISO-Drive™ technology and opto-isolated circuits. This functionality is critical for eliminating ground loops and effectively protecting connected equipment, including the host PC, from electrical damage. Inputs and outputs are also protected against overvoltage, electrostatic discharge (ESD), and short circuits, ensuring superior system integrity compared to non-isolated adapters. Its input circuit can capture low-level signals, often too weak for standard PC serial ports.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This interface supports a wide range of baud rates, from 300 to 230400 bps, making it compatible with various NMEA 0183 architectures as well as RS232\/RS422 requirements. It includes an isolated NMEA 0183 Listener (input) and NMEA 0183 Talker (output) port. USB compatibility extends to versions 1.1, 2.0, and 3.0. Power is supplied directly via the USB bus, with a maximum consumption of 50 mA. The device creates a virtual COM port on the connected PC, ensuring compatibility with standard marine navigation and display software.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Design and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The USG-2 is designed for the marine environment, with encapsulated electronics providing IP67 protection. Its ABS (PA-765) housing is flame-retardant (UL94 V-0), as is the PCB encapsulant made of polyurethane. The interface operates within a temperature range of -25°C to +70°C. A 2.0 m high-quality shielded USB cable and a high-retention USB connector are included, ensuring a robust and vibration-resistant connection. The tool-free plug-and-play connector, featuring a locking latch and strain relief, enables quick and secure installation. Diagnostic LEDs (blue for power, green for receive, orange for transmit) allow for quick verification of connection status and data transfer. The interface weighs 65 g, and the USB cable 70 g. A 3-year warranty is provided, extendable to 5 years after registration.\n\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":53723736342868,"sku":"USG-2","price":132.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c0553ae6-33c8-4ac5-be32-43a490798d0a.png?v=1779967461"},{"product_id":"victron-energy-ekrano-gx-centre-communication-marine","title":"Ekrano GX","description":"\u003cp\u003e\n    Designed as the latest generation of communication center and system controller, the Victron Energy Ekrano GX offers centralized management of energy installations. This device, successor to the Color Control GX, features a 7-inch touchscreen with a resolution of 1024 x 600 pixels and a maximum brightness of 1000 cd\/m², dynamically adjustable via an ambient light sensor or manually. The touch function can be disabled with a button to prevent unauthorized manipulation.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and advanced management\u003c\/h3\u003e\n\u003cp\u003e\n    The Ekrano GX is equipped with a powerful processor and runs on the intuitive Venus OS operating system, ensuring efficient management of Victron and third-party connected devices. It has three isolated VE.Direct ports, an isolated VE.Bus bus with two parallel RJ45 sockets, and two VE.Can ports (one isolated, one non-isolated). Network connectivity is provided by an Ethernet port, integrated 2.4GHz Wi-Fi, and Bluetooth Smart for initial setup. Two USB-A ports (max. 1.5A combined) and a MicroSD slot (up to 32GB) complete its interfacing capabilities.\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem integration and control\u003c\/h3\u003e\n\u003cp\u003e\n    This controller features two programmable NO\/NC relays (30VDC\/3A, 125VAC\/1A) for functions such as alarms or generator start\/stop. It also includes three inputs for resistive tank level probes (compatible with Europe 0-180 Ohm or US 240-30 Ohm), two temperature inputs (-20°C to +70°C), and two digital inputs for status monitoring or pulse counting. Power is supported across a voltage range of 8 to 70V DC, with a consumption of 6.2W at 100% screen brightness (at 12V) and 2.6W with the screen off (at 12V). The Ekrano GX provides an instant overview of system status, energy consumption, and production, and offers remote management via the Victron Remote Management (VRM) portal or the VictronConnect app. Its robust design with an aluminum housing and front protection rated IP54 (with steel bracket) or IP31 (with clips) makes it suitable for an operating temperature range of -20°C to +50°C. All necessary mounting materials are included.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723851587924,"sku":"BPP900480100","price":459.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5157149d-5bce-43eb-a838-85a006403ee8.jpg?v=1772644772"},{"product_id":"victron-energy-ecran-tactile-gx-touch-50-cerbo-gx","title":"GX Touch 50","description":"\u003cp\u003e\n    The Victron Energy GX Touch 50 touchscreen is a 5-inch dedicated display designed to accompany the Cerbo GX, the communication hub of Victron Energy power systems. It provides a direct visual interface for monitoring and controlling the installation, distinguishing itself from remote access methods via the VRM portal or the VictronConnect app through its permanent display and responsive touchscreen.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and operation\u003c\/h3\u003e\n\u003cp\u003e\n    The GX Touch 50 connects to the Cerbo GX via a single 1.98-meter HDMI\/USB cable. This cable provides both power via USB and video and touch data transmission. This design simplifies installation by reducing cable clutter. Unlike older displays such as the Color Control GX, the GX Touch 50 is optimized for surface mounting, avoiding complex cutouts. It features a sleek, modern design. The standard version is rated IP54 (splash and dust resistant), while flush-mount versions carry an IP65 rating, making them resistant to water spray and humidity, suitable for marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntuitive monitoring and control\u003c\/h3\u003e\n\u003cp\u003e\n    This touchscreen provides an immediate and complete overview of your power system. Users can monitor battery charge state, power consumption, photovoltaic production, generator and grid status, tank levels, and temperature measurements. The interface uses gestures similar to modern mobile devices to facilitate navigation and quick parameter adjustments. The GX Touch 50 is exclusively compatible with the Cerbo GX and does not work with the Venus GX. Its robust design ensures reliability under varied conditions, including temperature fluctuations and vibrations, and an optional protective cover is available for enhanced durability against water, dust, and UV.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723860107604,"sku":"BPP900455050","price":168.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d9dc221c-6a3f-4a72-86c8-4461b6d6d0cb.png?v=1778609377"},{"product_id":"victron-energy-globallink-520-passerelle-4g-lte-m","title":"GlobalLink 520","description":"\u003cp\u003e\n    The \u003cstrong\u003eVictron Energy GlobalLink 520\u003c\/strong\u003e is a communication gateway designed for remote monitoring of Victron systems via the Victron Remote Management (VRM) portal. It targets installations requiring reliable cellular connectivity for tracking critical data. Unlike the GlobalLink 530, which supports LTE-M and NB-IoT networks, the GlobalLink 520 focuses on 4G LTE-M (LTE Cat-M1), optimized for IoT applications. This approach ensures low power consumption and stable connectivity even while moving, making it ideal for recreational vehicles such as motorhomes.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The device integrates two isolated VE.Direct communication ports, allowing wired connection of devices such as BMV battery monitors, SmartShunts, MPPT solar chargers, or Phoenix inverters. It also supports up to 10 Victron Smart products via Bluetooth Low Energy (BLE) and RuuviTag sensors, transmitting temperature, humidity, and barometric pressure data to the VRM portal. The GlobalLink 520 is also equipped with two configurable digital inputs (usable as pulse counters) and a remotely controllable relay, offering additional monitoring and control capabilities.\n\u003c\/p\u003e\n\n\u003ch3\u003eAutonomy and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Powered by a wide voltage range of 8 to 70 VDC, the GlobalLink 520 features minimal power consumption, ranging from 5 mA at 48V (Bluetooth disabled, relay open) to 64 mA at 12V (Bluetooth enabled, relay closed). It comes with a preinstalled and prepaid SIM card providing five years of 4G LTE-M connectivity at no additional cost, simplifying deployment. An internal antenna is integrated, supplemented by an SMA connector for an optional external antenna, enabling signal strength optimization even in poor reception areas. Configuration is streamlined via the VictronConnect app, making the device operational right out of the box.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723861123412,"sku":"ASS030543020","price":164.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e0d8e9bc-ac7a-4937-9bdc-fca073c9efac.jpg?v=1778604795"},{"product_id":"victron-energy-color-control-gx-tableau-commande-gestion-energie","title":"Color Control GX","description":"\u003cp\u003e\n    The Victron Energy \u003cstrong\u003eColor Control GX\u003c\/strong\u003e is a centralized control panel designed for comprehensive monitoring and control of marine and off-grid energy systems. It provides intuitive management of all connected Victron devices, including inverters, Multi\/Quattro units, MPPT solar charge controllers, and BMV battery monitors. This model serves as a proven predecessor to the Cerbo GX, offering a local interface with an integrated display and remote management capabilities via the VRM portal. It remains a reliable solution for installations requiring detailed supervision and direct interaction, distinguishing itself from screenless gateways through its visual console. The CCGX centralizes data to provide an instant overview of system status, from battery charge to solar production and energy consumption.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced monitoring and control\u003c\/h3\u003e\n\u003cp\u003e\n    The Color Control GX offers local monitoring and control directly from its 4.3-inch color screen. It also enables complete remote management via Victron Energy’s \u003cstrong\u003eVRM online portal\u003c\/strong\u003e, accessible from any Internet-connected device. This feature, called Remote Console, replicates the local interface for full control. For installations without a permanent Internet connection, the CCGX stores data internally for 48 hours, with the option to extend this capacity using a micro-SD card or USB drive. This data can then be downloaded and analyzed via the VictronConnect app. The CCGX also integrates an automatic generator start\/stop function, highly customizable based on battery state of charge, voltage, or power demand, with specific rules for quiet periods and optional monthly testing.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    This control panel is compatible with a wide range of Victron products. It features two isolated VE.Direct ports, two isolated VE.Can RJ45 connectors, two isolated VE.Bus RJ45 connectors, and two unisolated USB Host ports. Internet connectivity is provided via an isolated 10\/100\/1000 MB RJ45 Ethernet port or Wi-Fi using an external USB-Wi-Fi accessory, as the CCGX lacks an internal cellular modem. A USB GPS can be connected to display position and speed on the screen and transmit this data to the VRM portal. The CCGX can also act as a Modbus-TCP gateway for all connected Victron products and supports NMEA 2000 integration for tank sensors and integration with marine MFDs via an app. Software updates can be automatic via the Internet or manual via USB\/micro-SD. The system runs on Venus OS (embedded Linux) and supports multiple languages.\n\u003c\/p\u003e\n\n\u003ch3\u003eStrategic energy management (ESS)\u003c\/h3\u003e\n\u003cp\u003e\n    At the heart of energy storage systems (ESS), the Color Control GX acts as a central manager. It can maintain backup batteries at 100%, activate them during power outages, and direct excess solar energy for self-consumption. Its supply voltage range of 8 to 70V DC and operating temperature range of -20 to +50°C ensure robustness suited to marine and industrial environments. The CCGX dimensions are 130 x 120 x 28 mm with a weight of 0.3 kg. Its current consumption ranges from 40mA (screen off at 48V DC) to 245mA (maximum brightness screen at 12V DC).\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723864072532,"sku":"BPP010300100","price":330.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_1280b993-faf2-4361-9b46-212df90b058b.jpg?v=1778607940"},{"product_id":"mastervolt-interface-masterbus-convertisseur","title":"MasterBus converter interface","description":"\u003cp\u003e\n    The \u003cstrong\u003eMasterBus converter interface\u003c\/strong\u003e from MASTERVOLT, part number 77030700, is an essential module designed specifically to integrate Mastervolt Mass Sine converters into the MasterBus communication network. This device enables centralized management and monitoring of converters via displays such as the EasyView 5 or a PC, providing full visibility of operating status and alerts.\n\u003c\/p\u003e\n\n\u003ch3\u003eMastervolt System Integration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This interface converter is compatible with a wide range of Mass Sine converters, including models 12\/500, 12\/800, 12\/1200, 12\/2000, as well as 24\/800, 24\/1500, 24\/2500, 24\/5000, 24\/10kVA, and 24\/15kVA. Its role is to translate converter data into information understandable by the MasterBus network, allowing converters to be powered on or off and transferring their status (running, standby, alarm) to the central system. Unlike more general-purpose interfaces in the same MasterBus range (such as the USB or NMEA2000 interfaces) that handle external connectivity, the converter interface is dedicated to the internal integration of inverters—a key component for Mastervolt installations requiring precise energy management. The user manual dated June 2008 indicates this is a previous-generation component, but still relevant for existing systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The converter interface features a compact design with dimensions of 66 x 78 x 32 mm and a weight of approximately 80 g, facilitating installation. It is designed for mounting on a 30 mm (1.2 inch) DIN rail, ensuring clean and secure integration into electrical panels or technical enclosures. With an IP21 protection rating, it is suitable for protected environments typical of indoor electrical installations. Its power consumption is minimal at just 144 mW and it is powered directly by the MasterBus network, requiring no external power supply. The product ships with a MasterBus cable, a cross-over RS232 cable (RJ12), a MasterBus terminator, and the user manual for quick commissioning.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723887173972,"sku":"77030700","price":146.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/u8us1jdz_6047_masterbusinverterinterface_2.jpg?v=1778088862"},{"product_id":"mastervolt-interface-serie-masterbus-passerelle-communication","title":"MasterBus Serial Interface","description":"\u003cp\u003e\n    Conçue pour faciliter l'intégration des équipements Mastervolt de générations antérieures, l'interface série MasterBus (référence 77030450) de MASTERVOLT est un composant essentiel pour moderniser les systèmes énergétiques embarqués. Cette interface sert de pont de communication, rendant les données des produits Mastervolt conventionnels disponibles en permanence sur le réseau MasterBus pour une configuration, un fonctionnement et un monitoring centralisés via un écran EasyView 5 ou un PC.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntégration et compatibilité\u003c\/h3\u003e\n\u003cp\u003e\n    L'interface série MasterBus est adaptée pour connecter une gamme spécifique d'appareils Mastervolt, notamment les moniteurs Masterlink BTM-III, les convertisseurs DC-DC Mac et Magic, ainsi que les combinés Mass Combi et les chargeurs Mass Charger. Cette compatibilité assure que les systèmes existants peuvent être intégrés sans nécessiter un remplacement complet des équipements fonctionnels. Contrairement aux solutions génériques, cette interface est spécifiquement optimisée pour le protocole Mastervolt, garantissant une communication fiable et une gestion précise des données énergétiques.\n\u003c\/p\u003e\n\n\u003ch3\u003eSpécifications techniques et positionnement\u003c\/h3\u003e\n\u003cp\u003e\n    Avec des dimensions compactes de 66 x 78 x 32 mm (2,6 x 3,1 x 1,3 pouces) et un poids léger d'environ 0,08 kg, l'interface série MasterBus s'intègre facilement dans divers environnements. Son indice de protection IP21 la destine à une installation dans des zones protégées, où elle peut fonctionner de 0 à 40 °C. Sa consommation électrique de 144 mW est faible, minimisant son impact sur le bilan énergétique global. Il est important de noter que cette interface ne fournit pas d'alimentation au réseau MasterBus. Elle est conforme aux normes harmonisées EN 50081-1:1992, EN 50082-1:1997 et EN 60950: 2000. L'expédition inclut l'interface, un câble de connexion série, un câble MasterBus, un dispositif de terminaison MasterBus et un manuel de l'utilisateur. En se positionnant comme une passerelle entre l'ancienne génération d'appareils série et le réseau MasterBus basé sur CAN-bus, elle permet aux utilisateurs de Mastervolt de prolonger la durée de vie de leurs équipements tout en bénéficiant des avantages d'un système de gestion d'énergie moderne et unifié.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723887468884,"sku":"77030450","price":146.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/u8r2gxku_6030_masterbusserialinterface_2.jpg?v=1778088860"},{"product_id":"mastervolt-interface-usb-masterbus-czone","title":"Mastervolt MasterBus USB Interface","description":"\u003cp\u003e\n    The \u003cstrong\u003eMastervolt MasterBus USB interface\u003c\/strong\u003e (part number 77030100) is an essential communication bridge designed to connect a Windows PC to MasterBus and CZone energy management networks. This adapter enables users and installers to interact directly and in-depth with embedded systems, facilitating configuration, diagnostics, and real-time monitoring.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This device establishes a reliable link between your computer (laptop or notebook) and the MasterBus network via an included USB cable. For MasterBus systems, it requires the use of the free MasterAdjust software, downloadable from the Mastervolt website. This software provides comprehensive system configuration, live control of connected devices, and data logging for later analysis. For CZone installations, the interface supports the CZone configuration tool, available via the CZone portal, requiring a Mastervolt-CZone drop cable.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced energy management features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMastervolt MasterBus USB interface\u003c\/strong\u003e allows granular management of your electrical installation. Using MasterAdjust, it is possible to customize settings for the entire network and each connected device, including programming event-based commands. These commands enable automation of specific actions, such as disconnecting a DC load when the battery voltage reaches a predefined low threshold. This advanced programming capability positions the interface as an indispensable tool for optimizing the performance and reliability of Mastervolt energy systems, offering a level of control superior to simple dashboard monitors.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The interface integrates with the MasterBus network, which is based on robust and proven CAN-bus technology, similar to reliable automotive bus systems. Installation requires a standard UTP connection for the MasterBus network and a free USB 2.0 port on the PC. The interface is powered via the MasterBus when the PC is on. Its compact dimensions (66 x 78 x 32 mm) and lightweight (0.08 kg) facilitate integration. With an IP21 rating, it is designed for sheltered environments. The package includes a USB connection cable, a 6-meter MasterBus cable, a MasterBus terminator, and the user manual. Compared to generic NMEA 2000\/0183 interfaces that offer broader but less specific connectivity, the Mastervolt interface is fully optimized for the Mastervolt and CZone ecosystem, ensuring maximum compatibility and configuration depth for these proprietary systems. It is critical to follow MasterBus network rules, including the use of end devices and avoiding loops or T-couplings, to ensure system stability.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723887567188,"sku":"77030100","price":144.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_569e6e3b-0d48-43b8-b24f-5654bd1adc19.jpg?v=1778022470"},{"product_id":"mastervolt-masterbus-repeater-reseau-etendue","title":"MasterBus Repeater","description":"\u003cp\u003e\n    The \u003cstrong\u003eMasterBus Repeater Mastervolt\u003c\/strong\u003e (reference 77031100) is a critical component designed to optimize and extend the range of MasterBus communication networks, a proprietary protocol from Mastervolt dedicated to intelligent energy management aboard vessels. This device doubles the maximum length of your MasterBus network, ensuring the integrity and reliability of data transmission in extended installations where direct wiring solutions reach their performance limits.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Technical Features\u003c\/h3\u003e\n\u003cp\u003e\n    The MasterBus Repeater integrates two primary functions: data refresh and network power supply. For data refresh, it offers three operational modes: \"Off\" mode, which splits the MasterBus into two separate networks without data transfer, \"On\" mode, which refreshes all data passing through the repeater, and \"Smart\" mode, which refreshes data only if the receiver is located on the other side of the repeater, thereby minimizing unnecessary traffic. This capability is crucial for complex installations, preventing signal degradation over long distances. The repeater is recommended for cable lengths exceeding 250 m with fewer than 10 devices, 150 m with fewer than 25 devices, or 100 m with fewer than 50 connected devices. It is powered via the MasterBus or an external 8–35 V DC source.\n\u003c\/p\u003e\n\n\u003ch3\u003ePower Management and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    In addition to data refresh, the MasterBus Repeater contributes to powering the MasterBus network. It offers a choice between \"Low\" power mode (12 V, 8 V at full load) and \"High\" power mode (16 V, 8 V at full load). Both modes deliver the same power output, but the \"Low\" mode prioritizes \"High powering\" devices in case of need, which is particularly beneficial for small, unmonitored battery banks. These features are configurable via a MasterView display or the MasterAdjust software. With compact dimensions of 66 x 78 x 32 mm and a weight of just 0.09 kg, it integrates discreetly and can be mounted on a 30 mm DIN rail. Its IP21 protection rating makes it suitable for protected environments. Unlike NMEA 2000 repeaters that extend a generic data bus, the MasterBus Repeater is specifically optimized for the Mastervolt protocol, ensuring maximum compatibility and performance within the brand’s energy management systems, such as those integrating Mastervolt chargers, inverters, and lithium batteries.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723887796564,"sku":"77031100","price":304.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_cb5d7280-524e-4f4a-9e36-1f92e2b13e0b.jpg?v=1778022599"},{"product_id":"mastervolt-pc-link-isolation-galvanique-rs232-rj12","title":"PC-LINK galvanic isolation","description":"\u003cp\u003eThe \u003cstrong\u003egalvanically isolated PC-Link interface\u003c\/strong\u003e from \u003cstrong\u003eMastervolt\u003c\/strong\u003e is an essential diagnostic and configuration tool for embedded electrical systems. Designed to connect a computer (via RS232 serial port) to Mastervolt equipment (via RJ12 port), this module enables full utilization of the MasterAdjust software. It provides installers and experienced users with the ability to precisely adjust critical parameters such as voltage, current, cutoff thresholds, and charge algorithms.\u003c\/p\u003e\n\u003ch3\u003eGalvanic isolation protection\u003c\/h3\u003e\n\u003cp\u003eUnlike standard communication interfaces, this version of the \u003cstrong\u003ePC-Link\u003c\/strong\u003e features complete galvanic isolation. This technical characteristic is crucial in marine or mobile environments, as it prevents ground loops and destructive electrical interference between the computer and the vessel's power network. The interface requires an external 6 to 30V DC power supply to operate autonomously and safely.\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Mastervolt compatibility\u003c\/h3\u003e\n\u003cp\u003eThe kit includes all necessary wiring for immediate integration. It comprises a 1-meter DC power cable, a dedicated programming cable for the Masterlink BTM1, and a standard cable for other Mastervolt equipment compatible with QRS232. TTL logic levels are strictly managed (5V for high state, 0V for low state) on the transmission (Txd) and reception (Rxd) pins, ensuring perfect data integrity during MasterAdjust parameter settings.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723888582996,"sku":"21730300","price":125.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_160b486f-5372-4414-a985-107d00050eb5.jpg?v=1778019627"},{"product_id":"victron-energy-gx-touch-70-ecran-tactile-controle-cerbo","title":"GX Touch 70","description":"\u003cp\u003e\n    Designed as a local interface for the Cerbo GX communication hub, the \u003cstrong\u003eVictron Energy GX Touch 70\u003c\/strong\u003e color touchscreen provides instant control and overview of your energy system. This 7-inch display, with a resolution of 1024 x 600 pixels, is a dedicated display solution that connects via a single combined 2-meter HDMI and USB cable, simplifying wiring and integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem Design and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The GX Touch 70 stands out with its slim, modern, and waterproof design, featuring an IP65 rating for flush-mount versions, making it suitable for demanding marine environments. Its dimensions of 113 x 176 x 13.5 mm allow for discreet integration. It offers multiple mounting options, including surface mounting without precise cuts, flush-mount versions with rubber gaskets or double-sided adhesive for a flush finish, and an optional wall adapter for installation without visible cable routing.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and Positioning\u003c\/h3\u003e\n\u003cp\u003e\n    The GX Touch 70’s user interface is intuitive, using natural gestures and allowing customization of the main dashboard. As a complement to the Cerbo GX, it not only enables local monitoring and adjustment of parameters but also access to remote monitoring capabilities via the Victron Remote Management (VRM) portal or the VictronConnect app, using the Wi-Fi hotspot and Bluetooth integrated into the Cerbo GX. Compared to its counterpart, the GX Touch 50, the 70 model offers increased display area for better readability and easier interaction, particularly useful in complex systems integrating MultiPlus inverters, Lynx Smart BMS, or VE.Direct devices. It positions itself as a centralized local display for those who prioritize direct visualization and touch control of their Victron installation.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786842947924,"sku":"BPP900455070","price":254.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-detail-BPP900455070-GX-Touch-70-rear-mounted.jpg?v=1778604767"},{"product_id":"victron-energy-cerbo-gx-mk2-hub-communication-systeme-energie","title":"Cerbo GX MK2 (ref 0110)","description":"\u003cp\u003e\n    The \u003cstrong\u003eCerbo GX MK2\u003c\/strong\u003e from Victron Energy is an advanced communication hub designed for the integration and control of complex energy systems. It centralizes monitoring and management of various Victron components, such as inverters, solar chargers, and batteries, providing a real-time overview of system performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eEnhanced Connectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Compared to previous models in the GX range, the Cerbo GX MK2 includes several significant improvements. It features 3 VE.Direct ports, 2 VE.Bus ports, and 3 functional USB ports, an upgrade from earlier versions where one USB port was dedicated to powering a GX Touch display. The Cerbo GX MK2 also includes 2 VE.Can ports (VE.Can 1 and VE.Can 2), with isolation for VE.Can 1, a feature absent in previous models that only offered one VE.Can port and an unisolated BMS-Can port. This extended connectivity ensures seamless integration with a wide range of Victron products and third-party devices, including an NMEA 2000 output for chartplotters.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Monitoring and Control\u003c\/h3\u003e\n\u003cp\u003e\n    With the Cerbo GX MK2, users can instantly monitor battery state of charge, energy consumption, photovoltaic production, as well as tank levels and temperatures via 4 resistive level inputs and 4 temperature probe inputs. The 4 programmable digital inputs now support pulse counting in addition to state monitoring (open\/closed) for alarms. The device also enables automatic generator start\/stop and adjustment of shore power input current limits to optimize system performance. The 2 programmable relay ports can be configured for various control functions.\n\u003c\/p\u003e\n\n\u003ch3\u003eRemote Management and Flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    The Cerbo GX MK2 simplifies remote management via the Victron Remote Management (VRM) portal and the VictronConnect app, allowing tracking of alerts, diagnostics, and firmware updates. Its physical design includes 180-degree rotatable RJ-45 connectors for simplified cable handling and DIN rail compatibility for flexible installation. Integrated WiFi and Bluetooth provide wireless connectivity options. It can be paired with optional GX Touch 50 or GX Touch 70 touchscreens for a local user interface.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786942267732,"sku":"BPP900450110","price":201.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-Cerbo-GX-MK2-front-angle.jpg?v=1778605822"},{"product_id":"victron-energy-ekrano-gx-support-mural-installation-facile","title":"Ekrano GX Wall Mount","description":"\u003cp\u003e\n    The Victron Energy Ekrano GX wall mount, model BPP900495100, is designed to enable quick and secure installation of the Ekrano GX communication hub on a solid wall. This accessory provides a surface-mount solution, distinct from traditional flush-mount options that require precise panel cutting, such as the 176 x 111 mm cutout required for the Ekrano GX itself. It simplifies installation with just four screws, eliminating the need for complex drilling or specific cutouts.\n\u003c\/p\u003e\n\u003ch3\u003eDesigned for easy integration and maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    With housing dimensions of 187 x 128 x 80 mm, this wall mount ensures stable attachment of the Ekrano GX. Its smart design allows the housing to open from the top via two screws and tilt forward. This feature provides easy access to the Ekrano GX interfaces for connecting additional cables, whether they enter from the sides, top, bottom, or rear, without removing the device from the wall. This modularity is an advantage for scalable systems or setups requiring frequent cable access.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning and practical benefits\u003c\/h3\u003e\n\u003cp\u003e\n    While the Ekrano GX comes with a steel bracket for flush mounting, offering IP54 protection at the front, the Victron Energy BPP900495100 wall mount is intended for installations where panel cutting is not desired or feasible. It keeps the Ekrano GX accessible and visible without compromising the structural integrity of the wall. This solution is particularly relevant in environments where installation flexibility and easy access to connections are priorities, complementing the mounting options available in the Victron Energy GX range.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786979950932,"sku":"BPP900495100","price":17.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-BPP900495100-Ekrano-GX-Wall-Mount-front.jpg?v=1778606228"},{"product_id":"victron-energy-ve-direct-bluetooth-smart-dongle-adaptateur","title":"VE.Direct Bluetooth Smart dongle","description":"\u003cp\u003e\n    Designed to extend the connectivity of Victron Energy equipment without built-in Bluetooth, the \u003cstrong\u003eVE.Direct Bluetooth Smart dongle\u003c\/strong\u003e enables wireless interaction via the VictronConnect app. This adapter turns any Victron product with a VE.Direct port—except GX or GlobalLink devices—into a device accessible from iOS, Android, or macOS terminals. It provides simplified monitoring, configuration, and firmware update capabilities, essential for efficient management of your onboard energy system.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The dongle includes key features such as access to data from non-smart devices (battery status, solar panel power) and the VE.Smart Networking wireless communication network. It also supports Instant Readout for quick visualization of main data and alerts directly in the VictronConnect device list (requires firmware 2.41 or later). This device is compatible with a wide range of Victron Energy products, including BMV 700 and 702 battery monitors, Phoenix Inverter VE.Direct inverters, and BlueSolar MPPT solar charge controllers. It does not support Windows PCs, synchronized charging via VE.Smart Networking, stored trends, the \"Keep SOC\" option for battery SOC setting on reset, or the Bluetooth GATT service.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and updates\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the dongle is straightforward: it connects to the VE.Direct port of the compatible device and is powered by it. Status LEDs (blue for Bluetooth, red for errors) provide clear indications of its operational state and update requirements. The VictronConnect app automatically manages firmware updates for the dongle and often for the connected Victron product during initial use. This solution offers an economical and practical alternative to modernize existing installations without replacing functional equipment.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786991124820,"sku":"ASS030536011","price":30.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-VE-Direct-Bluetooth-Smart-Dongle.jpg?v=1778606427"},{"product_id":"victron-energy-cerbo-gx-mk2-hub-communication-marine","title":"Cerbo GX MK2 (ref 1100)","description":"\u003cp\u003e\n    The Victron Energy Cerbo GX MK2 is an advanced communication hub designed for centralized monitoring and control of marine and off-grid energy systems. Successor to the first-generation Cerbo GX, this MK2 version integrates a dual-core processor and significant connectivity improvements for optimized energy management.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This communication hub is equipped with three isolated VE.Direct ports, two parallel RJ45 VE.Bus ports (isolated), and two fully functional VE.Can CAN bus ports, one of which is isolated. This configuration represents an improvement over previous models, which had a single VE.Can port and a BMS-Can port. The Cerbo GX MK2 also features three fully functional USB ports, unlike earlier versions where one port was dedicated solely to power. For network connectivity, it includes an Ethernet port, an HDMI port, and a Micro SD card slot. Its inputs include four resistive tank levels and four temperature sensors (range -40°C to +70°C, sensors not included), as well as four digital inputs capable of pulse counting. Two programmable relays are available as outputs.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Monitoring and Control\u003c\/h3\u003e\n\u003cp\u003e\n    With the Cerbo GX MK2, users benefit from real-time monitoring of battery state of charge, power consumption, photovoltaic production, generator, and grid status. The system also enables remote control via the Victron Remote Management (VRM) portal or the VictronConnect app using integrated Bluetooth and Wi-Fi. Local access is possible via optional GX Touch 50 or GX Touch 70 touchscreens, or a compatible multifunction display (MFD). The Cerbo GX MK2 also supports NMEA 2000 output for easy integration into onboard networks and runs on Venus OS 3.0, offering an intuitive interface.\n\u003c\/p\u003e\n\n\u003ch3\u003eApplications and Optimization\u003c\/h3\u003e\n\u003cp\u003e\n    The Cerbo GX MK2 is suitable for various applications, including marine installations, off-grid systems, backup systems, motorhomes, and emergency vehicles. It facilitates parameter adjustment, management of shore power input limits, and automatic start\/stop of generators. Node-RED support enables the creation of automation flows. The RJ-45 ports have been rotated 180 degrees to simplify cable connection and disconnection. Its power input ranges from 8 to 70V DC, and its dimensions are 78 (W) x 154 (D) x 48 (H) mm, with an operating temperature range of -20°C to +50°C.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786998366548,"sku":"BPP900451100","price":188.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-Cerbo-GX-MK2-front-angle_06c72d08-236a-46dc-9143-1b40f9e1bbc2.jpg?v=1778606647"},{"product_id":"victron-energy-gx-touch-50-support-mural","title":"GX Touch 50 Wall Mount","description":"\u003cp\u003e\n    The Victron Energy GX Touch 50 wall mount (part number BPP900465050) is an accessory designed to simplify installation of the GX Touch 50 touchscreen monitor. It allows direct mounting to a wall or dashboard without requiring precise cutouts as needed for the flush-mounted versions of the GX Touch 50. This mounting solution is particularly suitable for installations where complex cutouts are not desired or feasible, providing a practical alternative to traditional mounting options.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and positioning\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike the flush-mounted versions of the GX Touch 50, which require precise dimensions (94.4 x 135.9 x 12.0 mm for the flush version) and sealed or bonded mounting methods, this wall mount enables simplified installation. It only requires securing the bracket to the surface using three screws, eliminating the need for drilling or complex cutouts. The GX Touch 50 then snaps into place on this bracket, providing instant overview and control of the Victron energy system when paired with a Cerbo GX. This method also differs from the standard GX Touch 50 mounting, which has outer dimensions of 128 mm x 87 mm x 12.4 mm and can be bolted to a dashboard without precise cutouts, but does not offer the same ease of integration on a vertical wall.\n\u003c\/p\u003e\n\u003ch3\u003eGX Touch 50 features\u003c\/h3\u003e\n\u003cp\u003e\n    While the bracket is the main focus here, it is essential to note that the GX Touch 50, when mounted, features a 5-inch touchscreen with a resolution of 800 x 480 pixels. It connects to the Cerbo GX via a single HDMI\/USB cable (typically 78 inches), with the USB port providing power and the HDMI transmitting video and touch data. With this bracket, the GX Touch 50 retains its features such as system overview and control, an IP65 waterproof rating for the flush versions, and UV protection can be ensured with dedicated covers. The wall mount does not affect the GX Touch 50's ability to integrate seamlessly with the Cerbo GX for remote monitoring and management via the VRM portal or VictronConnect app.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787002528084,"sku":"BPP900465050","price":14.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-BPP900465050-GX-Touch-50-Wall-Mount-front-angle.jpg?v=1778606793"},{"product_id":"victron-energy-ve-direct-usb-c-interface","title":"VE.Direct to USB-C","description":"\u003cp\u003e\n    The Victron Energy VE.Direct to USB-C interface (part number ASS030530030) is an adapter designed to facilitate communication and configuration of Victron devices equipped with a VE.Direct port. This accessory allows direct connection of a Victron device to a computer or another USB-C compatible device, providing access to performance data and settings via VictronConnect software.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This protocol converter is essential for users who need to interact locally with their Victron Energy systems. It bridges the proprietary VE.Direct communication protocol, found on many solar chargers, inverters, battery monitors, and charge controllers from the brand, with the USB-C interface, common on modern laptops and tablets. Unlike more integrated solutions such as the Cerbo GX, which centralizes monitoring and control of the entire system, the VE.Direct to USB-C interface is dedicated to point-to-point connection for direct diagnosis and configuration of a specific device.\n\u003c\/p\u003e\n\n\u003ch3\u003eUse and positioning\u003c\/h3\u003e\n\u003cp\u003e\n    This adapter serves as a diagnostic and configuration tool for technicians and end users. It complements the Bluetooth modules integrated into some Victron products, offering a wired alternative for environments where wireless connectivity is unstable or undesirable. While solutions like VE.Direct to USB-A are also available, this USB-C version aligns with current connectivity standards, ensuring compatibility with the latest equipment. The interface is a key component for maximizing management of Victron energy systems, enabling software updates and precise parameter adjustments.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787012981076,"sku":"ASS030530030","price":22.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-ASS030530030-VE-Direct-to-USB-C-interface-unit.jpg?v=1778606986"},{"product_id":"victron-energy-mk3-usb-c-interface-vebus","title":"MK3-USB-C (VE.Bus to USB-C) MK2","description":"\u003cp\u003e\n    The \u003cstrong\u003eVictron Energy MK2,2b MK3-USB-C (VE.Bus to USB-C)\u003c\/strong\u003e interface is a tool designed for configuration, monitoring, updating, and diagnostics of Victron products equipped with a VE.Bus port. It provides wired connectivity via USB-C, compatible with Android, Windows, and macOS X systems, but not with iOS.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and system compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This accessory allows installers to efficiently configure energy systems after wiring and perform firmware updates without requiring an internet connection. It is compatible with a wide range of Victron VE.Bus products, including MultiPlus (including Compact), MultiPlus-II, MultiPlus-II GX, MultiGrid, Quattros, EasySolar, EasySolar-II, EasySolar-II GX, as well as Phoenix inverters with a VE.Bus port.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical positioning and requirements\u003c\/h3\u003e\n\u003cp\u003e\n    The MK3-USB-C interface, used with VictronConnect, is gradually replacing the VEConfigure and VEFlash software, offering a more intuitive interface and multiplatform compatibility. However, some advanced features such as assistants (AC PV, ESS), the full Virtual Switch, network code modification, the Lithium Battery Wizard (for VE.Bus BMS), and support for the external current sensor of Multiplus-II still require the use of VEConfigure. For full functionality (data reading, parameter modification, firmware updates), VE.Bus products must have firmware version 415 or higher, identifiable by a 7-digit software number starting with 26 or 27. For products with an older microcontroller (number starting with 19 or 20), the minimum supported version is 19xx200 (for Europe) or 20xx200 (for 120V models), limited to data reading. Older products (18xxxxx) are not supported. Unlike the VE.Bus Smart Dongle, which allows basic monitoring and operation via Bluetooth, the MK3-USB-C is the essential tool for full access to parameters and firmware updates of Victron VE.Bus systems.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787028545876,"sku":"ASS030140030","price":48.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-ASS030140030-Interface-MK3-USB-C-VE-Bus-to-USB-C-front.jpg?v=1778607260"},{"product_id":"victron-energy-smart-dongle-bluetooth-vebus-capteur-batterie","title":"Smart dongle","description":"\u003cp\u003e\n    The Victron Energy Smart dongle is a Bluetooth accessory designed for inverters\/chargers and inverters equipped with a VE.Bus port. It enhances your system by providing remote monitoring and control capabilities via the VictronConnect app, directly from your smartphone or tablet. This dongle enables more interactive management of your installation by delivering critical data and simplified control options. It is compatible with single-device configurations as well as parallel or three-phase systems.\n\u003c\/p\u003e\n\u003ch3\u003eRemote monitoring and control\u003c\/h3\u003e\n\u003cp\u003e\n    With the Smart dongle, you can remotely operate your inverter\/charger via Bluetooth, allowing you to turn the device on or off, switch it to \"charger only\" mode, or adjust the AC input current limit. Monitoring AC and DC parameters, device status, warnings, and alarms is also accessible. The \"Instant Readout\" feature displays essential inverter\/charger data directly on the VictronConnect device list page, providing quick diagnostics of potential issues. Unlike more comprehensive GX devices such as the Cerbo GX, which offer extended connectivity and VRM portal access, the Smart dongle focuses on direct local Bluetooth interface. It allows users to leverage VictronConnect’s smart features for VE.Bus system management without requiring complex network installation, positioning it as an entry-level or complementary solution for nearby monitoring and control.\n\u003c\/p\u003e\n\u003ch3\u003eBuilt-in battery sensor and VE.Smart Networking\u003c\/h3\u003e\n\u003cp\u003e\n    The dongle integrates battery voltage and temperature measurement, acting as a sensor for the inverter\/charger or for the VE.Smart Networking system. It is also possible to connect an optional external temperature sensor (BMV-712 Smart and BMV-702 sensors, not included) for installation flexibility. Integration into the VE.Smart network allows the dongle to transmit this data to other compatible devices, optimizing charging and overall system performance. It is important to note that the dongle does not support configuration or firmware updates of the inverter\/charger. Additionally, charger-related features are inactive when used solely with an inverter.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787239047508,"sku":"ASS030537010","price":71.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-detail-VE-Bus-Smart-Dongle-right.jpg?v=1778609418"},{"product_id":"raymarine-convertisseur-devicenet-nmea-0183","title":"DeviceNet to NMEA 0183 Converter","description":"\u003cp\u003e\n    The Actisense NGW-1 converter (reference A80721), sold by Raymarine, is designed to facilitate interoperability between marine equipment using NMEA 0183 and NMEA 2000 (SeaTalkng®) protocols. It enables bidirectional data transmission and reception, a key feature for integrating heterogeneous systems aboard.\n\u003c\/p\u003e\n\u003ch3\u003eSystem integration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This device is particularly useful for connecting third-party NMEA 0183 equipment or older-generation Raymarine NMEA 0183 products to current Raymarine multifunction displays (MFDs) with an NMEA 2000 connection. It ensures seamless navigation data continuity without requiring a full system upgrade. Unlike unidirectional converters, the NGW-1 offers flexibility for complex configurations.\n\u003c\/p\u003e\n\u003ch3\u003eApplication scenarios and configuration\u003c\/h3\u003e\n\u003cp\u003e\n    The Actisense NGW-1 converter supports multiple integration scenarios. For example, it can link an NMEA 0183 AIS unit to an NMEA 2000 MFD, transmitting NMEA 0183 sentences such as VDO and VDM. It also allows an NMEA 2000 MFD to share GPS position data (RMC, DTM sentences) with an NMEA 0183 VHF radio. Conversely, an NMEA 0183 VHF radio can send Digital Selective Calling (DSC, DSE) data to an NMEA 2000 MFD. Finally, it enables autopilot data (APB) transmission from an NMEA 2000 MFD to an NMEA 0183 autopilot. The converter’s baud rate is set by default to 38400 but can be adjusted via the 'Actisense Toolkit' PC software to match the connected equipment’s specific requirements.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900193292628,"sku":"A80721","price":226.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_ae2037bb-634c-459b-8695-090f2d97815d.jpg?v=1779377241"},{"product_id":"raymarine-kit-convertisseur-stng-nmea183-vhf","title":"STNG to NMEA 0183 VHF Converter Kit (1xR52131, 2xA06031, 2xA06032, 1xA80265, 1xA06049, 1xA06039)","description":"\u003cp\u003e\n    The Raymarine STNG to NMEA 0183 VHF converter kit, part number E70196, is an interface solution designed to facilitate communication between modern SeaTalk NG networks and NMEA 0183 devices, specifically VHF radios. This kit enables the integration of existing VHF radios with an NMEA 0183 interface into a Raymarine navigation system based on SeaTalk NG, avoiding the need for a complete replacement of functional equipment.\n\u003c\/p\u003e\n\u003ch3\u003eFunctionality and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike fully NMEA 0183 systems that require complex point-to-point wiring, or NMEA 2000\/SeaTalk NG networks that offer native plug-and-play connectivity, this Raymarine E70196 kit bridges the gap. It allows essential data, such as GPS and AIS (if present on the STNG network), to be transmitted to an NMEA 0183 VHF radio, enabling functions such as Digital Selective Calling (DSC) with automatic positioning. This approach is comparable to generic NMEA 2000 to NMEA 0183 converters but is optimized for the Raymarine ecosystem and VHF data transmission.\n\u003c\/p\u003e\n\u003ch3\u003eKit E70196 contents\u003c\/h3\u003e\n\u003cp\u003e\n    The E70196 kit consists of several essential components for conversion and connectivity. It includes a SeaTalk NG to NMEA 2000 adapter cable (R52131). For connection to the SeaTalk NG network, the kit provides two SeaTalk NG blanking plugs (A06031) and two termination caps (A06032), required for proper configuration and bus integrity. The SeaTalk NG to NMEA 0183 converter (A80265) is the central component of the kit, handling protocol translation and physical connection to the VHF radio. Finally, various connection cables of different lengths, including a 1-meter SeaTalk NG backbone cable (A06049) and a 400 mm SeaTalk NG spur cable (A06039), complete the kit for flexible installation suited to common onboard configurations.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900656435540,"sku":"E70196","price":116.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_3c03e1d7-6dc7-4c43-9d4d-0ed59c9155fc.jpg?v=1779378554"},{"product_id":"raymarine-interface-moteur-controle-universelle-eci-100","title":"Raymarine ECI-100 Universal Engine and Control Interface","description":"\u003cp\u003e\n    The Raymarine ECI-100 universal engine and control interface, part number E70227, is designed to integrate engine data into SeaTalkng networks. It converts data from NMEA 2000 and J1939 engine buses for display on compatible Raymarine multifunction displays.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This bridge module centralizes propulsion data for single-engine or multi-engine setups (two or more engines) with shared or separate CAN buses. The ECI-100 supports NMEA 2000 and J1939 protocols, covering a wide range of engine types. It is compatible with Raymarine multifunction displays running LightHouse software version 8 or later, as well as legacy MFDs such as the C-Classic series (C70, C80, C120), A-Classic series (A50, A50D, A57D, A70, A70D), and E-Classic series (E80, E120).\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and installation\u003c\/h3\u003e\n\u003cp\u003e\n    Measuring 109.2 mm long, 67.5 mm wide, and 30.2 mm high, the ECI-100 fits discreetly. Installation requires proper grounding and adequate fuse protection. For multi-engine systems, a motor identification assistant is available via LightHouse MFDs to configure data display order. The unit complies with EMC directive 2004\/108\/EC for electromagnetic compatibility. It meets IPX sealing standards, but exposure to high-pressure cleaners is not covered under warranty.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900690186580,"sku":"E70227","price":323.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_1df1e737-8e7b-479c-a323-9200290a9a67.jpg?v=1779378647"},{"product_id":"raymarine-interface-nmea-sans-fil-t122","title":"Wireless NMEA interface","description":"\u003cp\u003e\n    The RAYMARINE T122 wireless NMEA interface is designed for converting and transmitting NMEA 0183 data to the Micronet wireless system. This device receives and sends NMEA 0183 sentences in version 2.30, enabling integration of existing equipment into a Micronet network. It is powered by a 12\/24V DC source, ensuring stable and long-lasting operation on board.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and NMEA 0183 compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The T122 interface handles a range of NMEA 0183 V2.30 sentences, both for receiving and transmitting. Received signals include DBT (depth), DPT (depth with offset), GLL (latitude\/longitude position), HDG (heading), HDM (magnetic heading), MTW (water temperature), MWV (wind), RMB (route to waypoint), RMC (minimum navigation data), VHW (speed and heading over ground), VLW (distance traveled) and VWR (relative wind). For transmission, it supports DPT, GLL, HDG, MTW, MWVR (true wind), MWVT (true wind), RMB, RMC, VHW, VLW and VWR. Only available data is transmitted, ensuring optimized data management.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and marine environment\u003c\/h3\u003e\n\u003cp\u003e\n    For optimal performance and increased durability, the RAYMARINE T122 must be mounted in a dry area of the boat to protect cables and connectors from corrosion. It is also advisable to avoid metallic surfaces or metallic objects between the interface housing and other Micronet instruments to optimize wireless signal quality. For ideal transmission, a transverse rather than longitudinal mounting relative to the boat’s axis is recommended. Connection to the ship’s 12\/24V DC power supply is advised for reliable long-term operation, compared to using auxiliary batteries. The installation kit includes a mounting template, three mounting screws, and a terminal screwdriver, facilitating precise and secure surface installation.","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55902152327508,"sku":"T122","price":307.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_71fe27a0-fea5-4ac1-9e46-9e3403691cf5.jpg?v=1779383601"},{"product_id":"raymarine-t12217-kit-cables-interface-nmea2000-cablage","title":"Interface cables NMEA2000 kit (1X A06039, 1X A06045, 1X A06064, 1X A06049, 2X A06031)","description":"\u003cp\u003e\n    The Raymarine T12217 NMEA2000 interface cable kit is designed to simplify the integration of your Raymarine devices into an existing NMEA2000 network or to initiate a new infrastructure. This kit provides the essential elements for connectivity and basic power supply, ensuring reliable communication between marine instruments and NMEA2000-compatible sensors.\n\u003c\/p\u003e\n\u003ch3\u003eSimplified NMEA2000 connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This kit is a practical solution compared to purchasing individual NMEA2000 components. It includes a 1-meter A06039 drop cable, a 5-meter A06045 backbone cable, a T-connector A06064, a power cable A06049, and two terminators A06031. These components are fundamental for establishing a stable NMEA2000 network, enabling data transmission between different electronic navigation, fishfinder, or engine equipment.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The T12217 kit is specifically intended for Raymarine installations, although the NMEA2000 components are interoperable with other brands complying with the standard. It is part of Raymarine's wiring accessory range, complementing systems such as Axiom chartplotters, Element displays, or i70s instruments. Unlike kits tailored for specific sensors or displays, this T12217 provides a generic base for extending or creating an NMEA2000 network.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55902157013332,"sku":"T12217","price":123.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_d5545e8e-0072-4598-8885-3f4234af7885.jpg?v=1779383626"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/6985e29d6b8327567eeccd21c7f0baa0.png?v=1779976672","url":"https:\/\/skysat.fr\/en-gb\/collections\/interfaces-gateways.oembed","provider":"Skysat","version":"1.0","type":"link"}