{"title":"Production","description":"\u003ch2\u003eOnboard power production: generating, regulating and distributing charge\u003c\/h2\u003e\n\u003cp\u003ePower production covers the equipment that charges batteries from the engine, solar panels, or coupling systems. The goal is not just to produce amps: it is also necessary to match the charge to the battery chemistry, limit losses, protect cables, and monitor the battery bank status.\u003c\/p\u003e\n\n\u003ch3\u003eSolar power production\u003c\/h3\u003e\n\u003cp\u003eSolar charge controllers convert the variable voltage from panels into usable charge for batteries. The \u003ca href=\"\/en-gb\/products\/mastervolt-regulateur-charge-solaire-scm60-mppt-mb\"\u003eMastervolt SCM60 MPPT-MB solar charge controller\u003c\/a\u003e covers MasterBus-oriented installations, while the \u003ca href=\"\/en-gb\/products\/mastervolt-regulateur-charge-solaire-mppt-scm25\"\u003eSCM25 MPPT\u003c\/a\u003e addresses more compact needs. Victron’s \u003ca href=\"\/en-gb\/products\/victron-energy-bluesolar-mppt-150-45-controleur-charge-solaire\"\u003eBlueSolar MPPT 150\/45\u003c\/a\u003e and \u003ca href=\"\/en-gb\/products\/victron-energy-smartsolar-mppt-250-60-mc4-controleur-charge-solaire\"\u003eSmartSolar MPPT 250\/60-MC4\u003c\/a\u003e represent MPPT ranges based on PV voltage, charge current, and connectivity.\u003c\/p\u003e\n\n\u003ch3\u003eEngine power production\u003c\/h3\u003e\n\u003cp\u003eThe alternator remains the primary charging source whenever the engine is running. High-output models such as the \u003ca href=\"\/en-gb\/products\/mastervolt-alternateur-alpha-compact-28-150-volvo-penta-24v\"\u003eAlpha Compact 28\/150 Volvo Penta\u003c\/a\u003e, the \u003ca href=\"\/en-gb\/products\/mastervolt-alternateur-alpha-compact-14-200-alpha-pro-iii-12v\"\u003eAlpha Compact 14\/200 with Alpha Pro III\u003c\/a\u003e, or the \u003ca href=\"\/en-gb\/products\/mastervolt-alternateur-alpha-12-130-iii-regulateur-alpha-pro\"\u003eAlpha 12\/130 III with Alpha Pro regulator\u003c\/a\u003e must be selected with the correct regulator, pulley, and adequate ventilation.\u003c\/p\u003e\n\n\u003ch3\u003eRegulation, transmission and accessories\u003c\/h3\u003e\n\u003cp\u003eReliable engine charging also depends on accessories. The \u003ca href=\"\/en-gb\/products\/mastervolt-regulateur-charge-alpha-pro-iii-electricite\"\u003eAlpha Pro III charge regulator\u003c\/a\u003e controls the charging curve, the \u003ca href=\"\/en-gb\/products\/mastervolt-capteur-temperature-alternateur-cable-2m\"\u003ealternator temperature sensor\u003c\/a\u003e prevents overheating, and the \u003ca href=\"\/en-gb\/products\/mastervolt-poulie-multi-gorges-8-diametre-56mm-alternateur\"\u003emulti-groove pulleys\u003c\/a\u003e adapt belt transmission to the alternator.\u003c\/p\u003e\n\n\u003ch3\u003eCoupling and battery bank management\u003c\/h3\u003e\n\u003cp\u003eOn boats with multiple batteries or engines, relays and charging clusters organize power flows between banks. The \u003ca href=\"\/en-gb\/products\/bep-cluster-batterie-714-140a-dvsr-gestion-batterie\"\u003e714-140A-DVSR battery cluster\u003c\/a\u003e, the \u003ca href=\"\/en-gb\/products\/bep-cluster-distribution-batterie-triple-moteur-4-parcs-719-140a-dvsr\"\u003e3-engine 4-bank DVSR 140 A cluster\u003c\/a\u003e, and the \u003ca href=\"\/en-gb\/products\/bep-vsr-dig-12-24v-mc20-relais-batterie\"\u003e12\/24 V 140 A digital VSR\u003c\/a\u003e distribute charge and prevent unwanted feedback between banks.\u003c\/p\u003e\n\n\u003ch3\u003eBefore sizing\u003c\/h3\u003e\n\u003cp\u003eStart with an electrical assessment: daily consumption, battery capacity, engine runtime, available solar area, system voltage, and wiring constraints. To refine your selection, consult the collections \u003ca href=\"\/en-gb\/collections\/regulateurs-solaires\"\u003esolar charge controllers\u003c\/a\u003e, \u003ca href=\"\/en-gb\/collections\/alternateurs\"\u003ealternators\u003c\/a\u003e, \u003ca href=\"\/en-gb\/collections\/accessoires-alternateurs\"\u003ealternator accessories\u003c\/a\u003e, \u003ca href=\"\/en-gb\/collections\/poulies\"\u003epulleys\u003c\/a\u003e, \u003ca href=\"\/en-gb\/collections\/batteries\"\u003ebatteries\u003c\/a\u003e, \u003ca href=\"\/en-gb\/collections\/stockage\"\u003estorage\u003c\/a\u003e, and \u003ca href=\"\/en-gb\/collections\/moniteurs-de-batterie\"\u003ebattery monitors\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"integrel-plaque-adaptation-yanmar-jh-cr-45-57","title":"Yanmar JH-CR 45\/57 adapter plate","description":"\u003cp\u003eThe \u003cstrong\u003eIntegrel adapter plate for Yanmar JH-CR 45\/57\u003c\/strong\u003e is a high-precision mechanical component essential for installing the Integrel power generation system on Yanmar marine engines with common rail injection rated at 45 and 57 horsepower. This part ensures the structural connection between the original engine block and the high-power generator.\u003c\/p\u003e\n\u003ch3\u003eCustom engineering for Yanmar engines\u003c\/h3\u003e\n\u003cp\u003eUnlike universal mounts often prone to vibration, this plate is specifically machined to fit the exact mounting points of the Yanmar JH-CR 45 and 57 models. It guarantees perfect geometric alignment of the drive belt. This level of precision is critical to efficiently transfer mechanical power to the Integrel system without imposing asymmetric loads on the engine or generator bearings.\u003c\/p\u003e\n\u003ch3\u003eMechanical reliability in marine environments\u003c\/h3\u003e\n\u003cp\u003eDesigned to meet the demands of high-capacity power management systems, this mounting plate withstands the high torque generated during rapid battery bank charging. It forms the fundamental foundation for reliable onboard electricity production, thereby securing your overall energy management installation investment.\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723759247700,"sku":"ISD0008","price":2650.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/integrel-edrive-cover_57725522-ddb9-4052-ad64-937726f183b6.png?v=1780004689"},{"product_id":"integrel-plaque-adaptation-yanmar-sail-drive-sd60-5","title":"Yanmar Sail Drive SD60-5 adapter plate","description":"\u003cp\u003eThe Integrel Yanmar Sail Drive SD60-5 adapter plate (reference ISD0013) is a mechanical transmission component designed for integrating the power generation system with your marine engine. Machined in the United Kingdom, it ensures a rigid mount and perfect alignment between the Integrel high-power generator and the Yanmar SD60-5 Sail Drive transmission.\u003c\/p\u003e\n\n\u003ch3\u003eReliability and mechanical integration\u003c\/h3\u003e\n\u003cp\u003eThe Integrel system replaces a traditional generator by harnessing the excess power from the propulsion engine. Unlike standard or universal alternator mounts that can generate vibrations, this plate is specifically sized to withstand the mechanical stresses and high torque of the Integrel system. It guarantees optimal energy transfer without compromising the integrity of the Yanmar engine.\u003c\/p\u003e\n\n\u003ch3\u003eMounting specifications for SD60-5\u003c\/h3\u003e\n\u003cp\u003eDesigned exclusively for Yanmar Sail Drive SD60-5 stern drives, this adapter plate prevents premature wear of belts and bearings. By ensuring exact mounting geometry, it secures the installation of your onboard energy management system for extended and demanding sailing.\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723759640916,"sku":"ISD0013","price":2564.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/integrel-edrive-cover_9f262098-39cf-4885-a240-098917128d8f.png?v=1780004692"},{"product_id":"victron-energy-controleur-charge-smartsolar-mppt-100-30","title":"SmartSolar MPPT 100\/30 Charge Controller","description":"\u003cp\u003e\n    Designed to maximize solar energy production, the SmartSolar MPPT 100\/30 charge controller from VICTRON ENERGY is a solution for 12V and 24V battery systems, capable of handling up to 440W at 12V and 880W at 24V with a nominal charge current of 30A. It features ultra-fast MPPT technology that optimizes energy harvesting, particularly under cloudy skies or partial shading, outperforming PWM controllers by 30% and slower MPPT controllers by 10%.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    This model stands out with its integrated Bluetooth Smart connectivity, enabling wireless configuration, monitoring, and updates via the VictronConnect app on smartphones or tablets. For wired integration, the VE.Direct port ensures connection with GX devices such as the Color Control GX, offering extended monitoring via the Victron Remote Management (VRM) portal or a LoRaWAN device for remote installations. This communication capability makes it a versatile choice compared to BlueSolar models, which require an external Bluetooth dongle.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Charge Management and Protections\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar MPPT 100\/30 features an adaptive multi-stage charging algorithm, fully programmable with eight selectable presets. It is compatible with AGM, Gel, Flooded, and Lithium (LiFePO4) batteries, including a recovery function for fully discharged batteries, including Li-ion batteries with built-in disconnect function. The conversion efficiency exceeds 98% without a cooling fan, ensuring maximum output current up to 40°C. Comprehensive electronic protections are integrated: overheating (with power reduction), PV short-circuit, PV polarity reversal, and PV reverse current. An internal temperature sensor compensates for absorption and floating voltages, and the ability to add external sensors (Smart Battery Sense or BMV-712 Smart Battery Monitor) via Bluetooth allows for more accurate battery voltage and temperature readings.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"SmartSolar MPPT 100\/30 — Bluetooth","offer_id":53723849195860,"sku":"SCC110030210","price":97.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_85aebae8-c25d-4be0-8aa1-ce03be25470b.png?v=1772644609"},{"product_id":"victron-energy-controleur-charge-pwm-bluesolar-12-24v-20a","title":"BlueSolar PWM-Light 12\/24V-20A charge controller","description":"\u003cp\u003e\n    The \u003cstrong\u003eBlueSolar PWM-Light 12\/24V-20A charge controller\u003c\/strong\u003e from VICTRON ENERGY is an economical and reliable solution for managing solar energy in 12V or 24V off-grid systems. This model uses PWM (Pulse Width Modulation) technology to regulate battery charging with a nominal current of 20A, automatically detecting system voltage. It features a three-stage (bulk, absorption, float) smart charging process to optimize battery life, though these stages are not programmable.\n\u003c\/p\u003e\n\n\u003ch3\u003eKey Features and Protections\u003c\/h3\u003e\n\u003cp\u003e\n    This controller stands out for its simplicity and comprehensive protections. It provides a load output with automatic disconnect in case of low battery voltage, preventing excessive discharge. A two-digit, seven-segment display allows quick configuration of load output functions, including a timer for lighting control. Built-in protections include reversed battery polarity (via fuse), output short circuits, overload, and overheating, ensuring safe operation. It features common positive grounding and operates in a temperature range from -20°C to +50°C.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and Comparison\u003c\/h3\u003e\n\u003cp\u003e\n    The BlueSolar PWM-Light 12\/24V-20A is positioned as a cost-effective alternative to VICTRON ENERGY’s more sophisticated MPPT controllers, such as the BlueSolar MPPT or SmartSolar MPPT series. While MPPT controllers maximize solar panel efficiency by continuously adapting voltage, the PWM-Light model is ideal for installations where cost optimization is critical and the power loss associated with PWM technology is acceptable. It suits applications such as standalone lighting, small solar setups for cabins, camper vans, or medium-capacity vans, and battery maintenance. Its IP20 rating indicates use in sheltered environments, similar to many electronic devices not directly exposed to weather.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723856863572,"sku":"SCC010020020","price":23.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_ba86b323-b45d-4b5f-b186-b950920249f1.jpg?v=1778608616"},{"product_id":"victron-energy-smartsolar-mppt-100-15-controleur-charge-solaire","title":"SmartSolar MPPT 100\/15","description":"\u003cp\u003e\n    The Victron Energy SmartSolar MPPT 100\/15 charge controller is designed to optimize solar panel energy harvesting and battery management. This model features ultra-fast MPPT technology, capable of improving energy collection by up to 30% compared to PWM controllers and up to 10% compared to slower MPPT controllers, particularly under cloudy skies or with fluctuating light intensity. It is suitable for 12 V and 24 V battery systems, with automatic voltage selection, and supports a nominal PV power of 220 W at 12 V and 440 W at 24 V. The maximum PV open-circuit voltage is 100 V, with a nominal charge current of 15 A.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and intelligent management\u003c\/h3\u003e\n\u003cp\u003e\n    This controller stands out for its integrated Bluetooth Smart module, enabling wireless configuration, monitoring, and updates via the VictronConnect app. For wired integration, the VE.Direct port ensures connection to GX devices such as the Color Control GX. Peak efficiency of 98% and standby consumption of 25 mA at 12 V or 15 mA at 24 V characterize this device. Charge temperature compensation is internal (-16 mV\/°C or -32 mV\/°C), with an option for external sensor input via Smart Battery Sense or BMV-712 Smart Battery Monitor for enhanced accuracy.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced features for battery longevity\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar MPPT 100\/15 is equipped with a smart load output that prevents battery over-discharge by disconnecting loads at a predetermined voltage. The BatteryLife algorithm dynamically adjusts the disconnection level to ensure a recharge of nearly 100% at least once per week, thereby extending the lifespan of lead-acid batteries. It also supports recovery of fully discharged batteries, including lithium-ion batteries with internal disconnect functionality. Its design is robust, with an IP43 rating for electronic components and IP22 for the connection area, and it operates within a temperature range of -30 to +60°C, delivering full power up to 40°C. Dimensions are 100 x 113 x 50 mm with a weight of 0.6 kg. This model sits between the 75\/15 and 100\/20 versions of the SmartSolar range, offering a balance between charging capacity and flexibility for medium-sized marine systems.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723857060180,"sku":"SCC110015060R","price":64.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_52b5d416-584f-40b9-9150-b7758d4cfffe.png?v=1778604845"},{"product_id":"victron-energy-regulateur-solaire-smart-mppt-100-20-12-24-48v","title":"Victron Energy Smart Solar MPPT 100\/20 12\/24\/48V Charge Controller","description":"\u003cp\u003e\n    Designed to optimize solar energy harvesting, the Victron Energy SmartSolar MPPT 100\/20 (SCC110020160R) charge controller is a versatile charging solution for 12V, 24V, and 48V systems. It manages a nominal charge current of 20A and accepts an open-circuit voltage from photovoltaic (PV) panels up to 100V, with a nominal PV power of 290W at 12V, 580W at 24V, and 1160W at 48V.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced MPPT technology and smart connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This charge controller features ultra-fast maximum power point tracking (MPPT) technology, capable of improving energy harvesting by up to 30% compared to PWM controllers and 10% compared to slower MPPT controllers, particularly under cloudy skies where light intensity varies constantly. Integrated Bluetooth Smart enables wireless configuration, monitoring, and updates via the VictronConnect app, eliminating the need for an external dongle. For wired integration, the VE.Direct port facilitates connection to a Color Control GX or other GX products, as well as to a PC.\n\u003c\/p\u003e\n\u003ch3\u003eBattery management and protection features\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar MPPT 100\/20 includes a smart charge output that prevents excessive battery discharge. The BatteryLife algorithm adjusts the load disconnection level to ensure near-full battery recharge at least once per week, extending battery life. The controller can recharge fully discharged batteries, even at 0 volts, provided the cells are not damaged. It also offers a programmable battery charge algorithm compatible with lithium, AGM, gel, and lead-acid batteries, with internal temperature compensation. External battery voltage and temperature sensors can be added via Bluetooth (Smart Battery Sense or BMV-712 Smart) for increased accuracy. The controller is protected against output short circuits, overheating, and battery polarity reversal (via fuse). With a peak efficiency of 98% and an operating temperature range of -30 to +60°C (full nominal output up to 40°C), this model stands as a robust and high-performance solution in Victron Energy’s SmartSolar range, offering superior capabilities compared to the 75\/10 or 75\/15 models, including its 48V compatibility and 20A charge current.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723862925652,"sku":"SCC110020160R","price":74.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_1efd70fc-1a52-40c5-8ac6-746fc2ca7662.jpg?v=1778606482"},{"product_id":"mastervolt-kit-6-bagues-isolation-alternateur-alpha-compact","title":"Kit of 6 insulation rings for Mastervolt Alpha Compact alternator","description":"\u003cp\u003eThis kit of 6 \u003cstrong\u003eMASTERVOLT\u003c\/strong\u003e insulation rings is an essential accessory for the correct installation of the Alpha Compact alternator. Designed to ensure optimal electrical isolation between the alternator and its engine mount, these rings prevent parasitic ground currents and electromagnetic interference that can disrupt sensitive onboard electronic systems. Made from high-quality composite insulating material, they provide mechanical and thermal resistance suited to the environment of an engine room.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and positioning within the Mastervolt range\u003c\/h3\u003e\n\u003cp\u003eThe insulation rings are specifically designed for the \u003cstrong\u003eMastervolt Alpha Compact\u003c\/strong\u003e alternator, a model from the Dutch manufacturer’s high-performance alternator range. This kit of 6 rings is the replacement solution to maintain the integrity of the electrical installation. Unlike older alternators or Beta range models, the Alpha Compact requires this type of isolation to operate reliably with Mastervolt battery chargers and regulators. This kit is an essential consumable for any owner of an Alpha Compact alternator.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723869315412,"sku":"48420242","price":162.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_e3e26631-8675-4e6d-a20e-d492e0382629.jpg?v=1778084028"},{"product_id":"mastervolt-regulateur-charge-solaire-mppt-scm25","title":"Solar charge regulator MPPT SCM25","description":"\u003cp\u003eThe \u003cstrong\u003eMastervolt Solar ChargeMaster MPPT SCM25 solar charge regulator\u003c\/strong\u003e is the smallest MPPT regulator in its range, yet remains powerful. With a maximum charge current of 25 A and intelligent energy management, it is perfectly suited for small to medium solar installations, whether on a sailboat, motorboat, or recreational vehicle. Mastervolt’s MPPT (Maximum Power Point Tracking) technology delivers peak efficiency exceeding 98 %, ensuring battery charging up to 30 % faster than traditional PWM regulators.\u003c\/p\u003e\n\n\u003ch3\u003eMPPT technology and extended compatibility\u003c\/h3\u003e\n\u003cp\u003eUnlike its larger siblings in the range, such as the SCM50 or SCM60, the SCM25 is designed for solar panel power ratings between 200 and 700 Wp. It is compatible with a wide variety of panels, including entry-level 60-cell models, making it highly versatile. Its automatic 12\/24 V detection simplifies installation. Mastervolt’s MPPT technology, with a maximum power point tracking accuracy of 99.9 %, continuously optimizes energy production, even in low light or changing light conditions.\u003c\/p\u003e\n\n\u003ch3\u003eSimplified installation and use\u003c\/h3\u003e\n\u003cp\u003eThe SCM25 comes with a battery temperature sensor, essential for adjusting charge voltages and extending battery life. It is suitable for all battery types: AGM, gel, flooded, and Mastervolt Lithium Ion. Battery charge profiles are selected with a single button press, and the backlit LCD screen provides clear visibility of charge status, current, and alarms. Its IP23 protection rating guards against water splashes and condensation, but it must be installed in a dry, well-ventilated location.\u003c\/p\u003e\n\n\u003ch3\u003eBuilt-in protections and reliability\u003c\/h3\u003e\n\u003cp\u003eThe SCM25 includes multiple protections: overcharge, short circuits, reverse polarity, overheating, and battery over\/under-voltage. An audible alarm sounds in case of malfunction. While the SCM25 is a robust regulator, it is important to note that it does not protect against overvoltage on the solar input or induced overvoltages from storms. Installing a surge protector upstream is therefore strongly recommended for optimal system protection.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723869479252,"sku":"131902500","price":200.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_d371ac6c-1c9a-438b-9cb9-4f378857c9a2.jpg?v=1778083928"},{"product_id":"mastervolt-alternateur-alpha-12-130-iii-regulateur-alpha-pro","title":"Alpha 12\/130 III Alternator with Alpha Pro III","description":"\u003cp\u003eDesigned to meet the energy requirements of modern vessels, the \u003cstrong\u003eAlpha 12\/130 III alternator\u003c\/strong\u003e from \u003cstrong\u003eMastervolt\u003c\/strong\u003e turns your engine into a high-performance energy source. Unlike standard alternators that require high engine speeds to deliver their rated capacity, this 130 A model is specifically optimized to provide full charging power even at low speeds. It offers a silent and efficient alternative to installing a generator, particularly when used as a secondary alternator in combination with a high-capacity battery bank.\u003c\/p\u003e\n\n\u003ch3\u003eSmart regulation with Alpha Pro III\u003c\/h3\u003e\n\u003cp\u003eThe integrated \u003cstrong\u003eAlpha Pro III\u003c\/strong\u003e charge regulator ensures optimal efficiency and extends battery life. With its 3-stage charging process (Absorption at 14.25 V and Float at 13.25 V), this system is compatible with lead-acid and lithium-ion battery banks. The regulator precisely controls output voltage and current, preventing overcharging while ensuring fast recharging. Adding a Battery Mate-type charge distributor allows simultaneous management of multiple banks (start and service) safely.\u003c\/p\u003e\n\n\u003ch3\u003eMechanical and thermal design for marine environments\u003c\/h3\u003e\n\u003cp\u003eWeighing 10.1 kg and featuring an insulated design, this 12 VDC alternator is built for harsh environments. Its bidirectional fan provides powerful forced cooling, enabling it to maintain high performance even in engine rooms where temperatures exceed 40 °C. Supplied as standard with a double V-belt pulley (2xA section, 89 mm nominal diameter) and featuring a \"six o'clock\" mounting type, it adapts to many engine mounts. Unlike the Alpha Compact range, the classic Alpha series offers bidirectional rotation, facilitating integration into a wider variety of mechanical configurations.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723874689364,"sku":"48612130","price":1035.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_838c21e8-4465-42fd-80c5-6672b3f34442.jpg?v=1778053269"},{"product_id":"mastervolt-alternateur-alpha-24v-110a-energie","title":"Alpha 24 V 110 A Alternator","description":"\u003cp\u003e\n    L'alternateur Mastervolt Alpha 24V 110A (référence 48224110) est conçu pour les systèmes énergétiques marins exigeants, offrant une solution de charge haute performance pour les parcs de batteries de servitude en 24V. Avec un courant de sortie de 110A, il assure une recharge rapide et efficace.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntégration et compatibilité moteur\u003c\/h3\u003e\n\u003cp\u003e\n    Cet alternateur se distingue par sa flexibilité d'intégration sur diverses motorisations. Il peut être monté comme second alternateur sur les moteurs Volvo Penta D4 (D4-180I-F à D4-300I-F) et D6 (D6-280I-A à D6-435I-WJ-F) avec le support Volvo Penta numéro 3584501. De même, sur les moteurs MD20 (MD2010C à MD2040D), il s'installe en tant que second alternateur via le support Volvo Penta numéro 3581049.\n\u003c\/p\u003e\n\u003cp\u003e\n    Pour les moteurs Volvo Penta D2 (D2-55C à D2-75F), l'alternateur Alpha 24V 110A peut remplacer l'alternateur standard. Cette configuration nécessite un kit spécifique (Volvo Penta numéro 3885212) qui permet de déplacer l'alternateur d'origine pour alimenter le moteur. Un faisceau de câbles supplémentaire (Volvo Penta numéro 3886482) est requis pour connecter l'alternateur 12V standard dans sa nouvelle position. Sur les moteurs de la série 2000 (2002, 2003, 2003T, etc.), l'alternateur Mastervolt Alpha peut également être monté en remplacement, avec des ajustements nécessaires. Le modèle 24V 110A pèse 10,1 kg, garantissant une construction robuste adaptée aux environnements marins.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositionnement dans la gamme Alpha\u003c\/h3\u003e\n\u003cp\u003e\n    L'alternateur Alpha 24V 110A s'inscrit dans la gamme complète d'alternateurs Alpha de Mastervolt, qui comprend également les modèles 12\/90A, 12\/130A, 24\/75A et 24\/150A. Cette diversité permet d'adapter la solution de charge aux besoins spécifiques de chaque installation, que ce soit en termes de tension ou de puissance. Bien que la documentation technique date de 2013, le produit est toujours référencé avec un tarif 2025 Q2, confirmant sa pertinence et sa disponibilité actuelle sur le marché, comme une alternative performante aux alternateurs d'origine ou pour l'ajout de capacité de charge dédiée à la servitude. Il n'est pas conçu comme une pièce de rechange universelle mais comme un composant d'optimisation énergétique, nécessitant des supports et kits d'installation spécifiques non inclus avec l'alternateur lui-même.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723874885972,"sku":"48224110","price":1048.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_17d4dda1-5702-4a71-8bca-df6eccff2394.jpg?v=1778059834"},{"product_id":"mastervolt-alternateur-alpha-24v-150a-evo-alpha-pro-iii-masterbus","title":"Alpha 24 V 150 A EVO Alternator with Alpha Pro III","description":"\u003cp\u003e\n    The \u003cstrong\u003eMastervolt Alpha 24V 150A EVO\u003c\/strong\u003e alternator, paired with the \u003cstrong\u003eAlpha Pro III\u003c\/strong\u003e charge regulator, is a high-efficiency marine power generation solution designed to replace the use of a diesel generator. Unlike first-fit models that require high engine RPM, this unit is specifically calibrated to deliver maximum charging current at low RPM and idle. This system ensures rapid and complete charging of service and starting battery banks.\n\u003c\/p\u003e\n\n\u003ch3\u003eElectrical performance and intelligent regulation\u003c\/h3\u003e\n\u003cp\u003e\n    This model delivers a total current of 150 A at a system voltage of 24 VDC. Control is provided by the Alpha Pro III regulator (firmware version 4.0 or higher), which enforces a 3+ stage intelligent charging cycle. Setpoint voltages are fixed at 28.5 V for absorption and 26.5 V for float (measured at 25°C). The system includes a temperature probe for thermal compensation of the charge, thus optimizing the lifespan of lead-acid and lithium-ion battery banks. It also integrates the \"Keep Alive\" function and natively communicates via the MasterBus protocol, enabling configuration, real-time monitoring, alarm management, and event history, particularly when paired with a MasterShunt. The connection between the alternator and the regulator is via a 1.5-meter hydrocarbon-resistant marine-grade cable supplied as standard.\n\u003c\/p\u003e\n\n\u003ch3\u003eMechanical specifications and thermal tolerance\u003c\/h3\u003e\n\u003cp\u003e\n    The alternator weighs 13.1 kg and operates with electrical isolation from ground. It features bidirectional rotation, adapting to various engine configurations. To efficiently transmit power without premature wear, it is equipped with a double pulley (2xA belt section) with a nominal diameter of 89 mm. Thermal management is ensured by a forced-cooling system via an integrated pulley fan, maintaining output power even in engine compartments where ambient temperature exceeds 40°C. Mounting options are flexible thanks to multiple mounting points (positions five to six, six o’clock, and five after six), facilitating installation on custom mounts.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and technical comparison\u003c\/h3\u003e\n\u003cp\u003e\n    Within the Mastervolt range, the Alpha 24\/150 EVO stands as the \"heavy-duty\" solution compared to lower-capacity models like the 24\/75, doubling the charging capacity for vessels with high energy demands (air conditioning, watermakers). Compared to standard OEM alternators, the Alpha EVO eliminates the issue of voltage collapse at high temperatures. When compared to direct competitors such as the Balmar XT or AT series, Mastervolt’s positioning stands out due to native and seamless integration with the MasterBus ecosystem without requiring additional gateways, as well as the systematic inclusion of the external Alpha Pro III regulator. Paired with a Battery Mate distributor, this alternator can simultaneously charge up to three separate battery banks with near-zero voltage drop.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723875082580,"sku":"48624152","price":1926.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_d08edc29-ac8d-45d2-b1be-13875cdee7c0.jpg?v=1778059840"},{"product_id":"mastervolt-alternateur-alpha-compact-14-120-alpha-pro-iii","title":"Alpha Compact 14\/120 Alternator with Alpha Pro III","description":"\u003ch3\u003eAlpha Compact 14\/120 Alternator with Alpha Pro III Regulator\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAlpha Compact 14\/120 Alternator\u003c\/strong\u003e by \u003cstrong\u003eMastervolt\u003c\/strong\u003e (reference 46614120) is a high-performance charging system designed for marine and mobile energy storage installations. Operating on a 12 V network (14 V charging voltage) with a 120 A output current, it is specifically optimized to deliver high power continuously, even at low engine speeds (idle). The unit weighs 6.7 kg and features an open construction with an integrated dual internal fan for optimal cooling, even in high ambient temperature environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eComparison with standard alternators and the Alpha range\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike OEM alternators installed by default by engine manufacturers, or Mastervolt’s standard Alpha range, the \u003cstrong\u003eAlpha Compact\u003c\/strong\u003e series stands out with a 25 % smaller footprint and 40 % lighter weight. Its patented magnetic design reduces fuel consumption by 30 to 40 % compared to equivalent competitors. Designed to fit directly onto factory power take-off (PTO) mounts, it offers a superior alternative to basic alternators, capable of handling the intensive charging cycles required by modern service battery banks.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and wiring\u003c\/h3\u003e\n\u003cp\u003e\n    This alternator features a clockwise rotation direction and is mounted using a swivel arm. It includes two M8 positive output studs, an isolated W (RPM) signal connection via Faston terminal, and a dedicated Mastervolt connector for excitation current. By default, the system is not galvanically isolated (negative pole connected to the housing), but isolated operation is possible by installing optional insulating sleeves. Cables and electronics are sealed against oil, moisture, and contaminants. Note that the multi-groove free-wheel pulley is not included, allowing selection of the exact diameter suited to the installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced regulation with Alpha Pro III and MasterBus compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The package includes the \u003cstrong\u003eAlpha Pro III\u003c\/strong\u003e charge regulator (firmware 4.0 or higher), which transforms this alternator into a true three-stage (Bulk, Absorption, Float) smart charger. It is compatible with lead-acid, Gel, AGM, and Lithium-Ion battery banks. The charging process is temperature-compensated via an integrated probe (RJ12 connection) to prevent overcharging. The Alpha Pro III is fully connectable to the MasterBus network for real-time monitoring of RPM, charge state, and alarm configuration. It also features an engine load balancing function to reduce mechanical wear and a \"Keep alive\" function ensuring reliable signal transmission to the onboard tachometer.","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723875246420,"sku":"46614120","price":2081.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_e9daf780-7bec-49ab-91a9-36c563fad4ae.jpg?v=1778053088"},{"product_id":"mastervolt-alternateur-alpha-compact-14-140-vp-alpha-pro-iii-12v","title":"Alpha Compact 14\/140 VP Alternator with Alpha Pro III","description":"\u003cp\u003eThe \u003cstrong\u003eAlpha Compact 14\/140 VP\u003c\/strong\u003e alternator from \u003cstrong\u003eMastervolt\u003c\/strong\u003e is a high-performance marine energy production solution, specifically designed to fit Volvo Penta engines via its saddle mount. Delivering a nominal current of 140 A at a 12 V system voltage, it stands out from the standard Alpha series with its reduced footprint and optimized cooling thanks to an integrated dual-fan system, allowing it to operate up to 120 °C. For its drive, this alternator requires a 4.8 kW power take-off (PTO) on the engine.\u003c\/p\u003e\n\u003ch3\u003eIntegrated Alpha Pro III smart regulator\u003c\/h3\u003e\n\u003cp\u003eThis kit includes the advanced \u003cstrong\u003eAlpha Pro III\u003c\/strong\u003e charge regulator, turning this alternator into a three-stage smart charger (Bulk, Absorption, Float). Unlike standard regulators, it automatically compensates the charging voltage based on temperature (-30 mV\/°C at 12 V) to effectively protect battery banks (lead, gel, AGM, or lithium-ion). Fully compatible with the MasterBus communication network via its two RJ-45 ports, it provides complete system monitoring, including alternator temperature, excitation current, and voltage alarms, facilitating integration with other equipment such as the MasterShunt.\u003c\/p\u003e\n\u003ch3\u003eReady for installation\u003c\/h3\u003e\n\u003cp\u003eThe Alpha Compact 14\/140 VP alternator is supplied ready-to-use with a standard pulley for 8-rib multi-groove belt (48.1 mm diameter). The kit also includes a hydrocarbon-resistant wiring harness, a battery temperature sensor, and robust connections, including an M8 stud for the positive terminal. While not isolated by default, an insulating bushing kit is available as an option for systems requiring strict galvanic isolation.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723875410260,"sku":"46614142","price":1997.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_643623ab-fed6-4f4b-a2c3-97445cd0887b.jpg?v=1778053117"},{"product_id":"mastervolt-alternateur-alpha-compact-14-200-alpha-pro-iii-12v","title":"Alpha Compact 14\/200 Alternator with Alpha Pro III","description":"\u003cp\u003eThe \u003cstrong\u003eAlpha Compact 14\/200\u003c\/strong\u003e alternator from \u003cstrong\u003eMastervolt\u003c\/strong\u003e is the ultimate solution for high-energy demands onboard. Designed specifically for demanding marine environments, it delivers a powerful nominal current of 200 A at 12 V, ensuring rapid charging of your battery banks, whether they are lead-acid (acid, gel, AGM) or lithium-ion. Unlike standard alternators that require high engine speeds, the Alpha Compact provides exceptional output even at low speeds (generation speed at 1350 rpm), making it ideal for harbor maneuvers or extended anchoring.\u003c\/p\u003e\n\u003ch3\u003eAlpha Pro III charge regulator included\u003c\/h3\u003e\n\u003cp\u003eThis model comes standard with the intelligent \u003cstrong\u003eAlpha Pro III\u003c\/strong\u003e charge regulator, which optimizes the process through its three-stage charging algorithm (Bulk, Absorption, Float). It automatically adjusts the voltage (up to 14.25 V in Bulk and Absorption) and compensates for temperature (-30 mV\/°C at 12 V) thanks to the supplied battery temperature sensor. This preserves the lifespan of your batteries while maximizing energy efficiency. Additionally, its full integration with the MasterBus network allows for advanced monitoring and configuration from a display or centralized system.\u003c\/p\u003e\n\u003ch3\u003eRobust design and thermal performance\u003c\/h3\u003e\n\u003cp\u003eEquipped with a patented magnetic design and optimized cooling, the Alpha Compact 14\/200 alternator supports a maximum operating temperature of 120 °C. With a compact weight of 7.5 kg and a power input of 5.6 kW (7.6 HP), it fits perfectly into compact engine compartments. Its ability to withstand rotation speeds up to 20,000 rpm makes it an extremely reliable and durable piece of equipment compared to standard Alpha models, positioning it as a top choice for demanding sailors.","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723875606868,"sku":"46614200","price":2226.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_d978d8b9-f4e2-472d-9893-601a0ddf7052.jpg?v=1778053146"},{"product_id":"mastervolt-alternateur-alpha-compact-28-110-24v","title":"Alpha Compact 28\/110 Alternator","description":"\u003cp\u003eMastervolt’s Alpha Compact 28\/110 alternator is a high-performance energy generation solution designed specifically for demanding marine environments. Capable of continuous operation under the high temperatures of an engine room, this 24V model delivers 110A to ensure rapid charging of your service and starter battery banks. Unlike standard alternators often limited by heat, the Alpha Compact series maintains optimal mechanical and electrical efficiency even at full load.\u003c\/p\u003e\n\u003ch3\u003eIntegration and charge regulation\u003c\/h3\u003e\n\u003cp\u003eThis model is designed to operate in synergy with the external Alpha Pro charge regulator (sold separately). This combination enables a precise 3-stage charging algorithm, essential for maximizing the lifespan and performance of lead-acid and lithium-ion (Li-ion) battery banks. Whether used as a primary or secondary alternator, it converts your engine’s mechanical power into a reliable and regulated electrical energy source.\u003c\/p\u003e\n\u003ch3\u003eMechanical specifications and installation\u003c\/h3\u003e\n\u003cp\u003eMastervolt’s Alpha Compact 28\/110 alternator weighs 7.4 kg and requires clockwise rotation (viewed from the pulley side) to ensure proper operation of its internal cooling fans. Unlike the classic Alpha series (such as the standard 24\/110), which features a bidirectional fan, rotation direction is critical here. Additionally, this model is supplied as standard non-insulated (grounded to the housing) and without a pulley. For engines requiring insulated mounting to protect onboard electronics, the optional insulating bushing kit (reference 48420242) must be used, which will reduce the diameter of the mounting holes when installed on the mounting bracket.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723875770708,"sku":"46228110","price":1636.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_3a1e59b6-e087-4a89-9e23-6557959eeb97.jpg?v=1778053003"},{"product_id":"mastervolt-alternateur-alpha-compact-28-110-alpha-pro-iii-24v","title":"Alpha Compact 28\/110 Alternator with Alpha Pro III","description":"\u003cp\u003e\n    The \u003cstrong\u003eMastervolt Alpha Compact 28\/110\u003c\/strong\u003e alternator (part number 46628110) is a 24 V DC charging system designed for marine, mobile, and industrial applications requiring continuous power supply. It is supplied as standard with the external Alpha Pro III charge regulator, forming a complete solution compatible with the MasterBus network. This equipment enables rapid charging of service battery banks while powering onboard electrical consumers.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and comparison\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike original alternators installed by engine manufacturers, which are often limited at low RPM, the Alpha Compact 28\/110 is specifically wound to deliver high charging current even at idle. Compared to the standard Mastervolt Alpha range, this Compact series features an automotive-style design that reduces volume by 25% and weight by 40%, while cutting fuel consumption by up to 30% thanks to improved efficiency. Within its own range, this standard model differs from the \"VP\" (Volvo Penta) version by the absence of an included pulley. This design choice allows the installation of a multi-groove free-wheel pulley with a diameter matching the target installation’s speed ratio.\n\u003c\/p\u003e\n\n\u003ch3\u003eElectrical and thermal specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This alternator delivers a nominal current of 110 A at 6,000 RPM and 25 °C. Its charging capacity at idle reaches approximately 41 A at 1,800 RPM. The startup speed is set at 1,400 RPM, with a maximum tolerated speed of 15,000 RPM. It requires a power take-off (PTO) of 6.2 kW (8.3 hp). The unit is designed to operate in confined engine rooms, with a maximum operating temperature of 120 °C. Cooling is provided by an open design featuring a dual internal fan and a patented magnetic circuit that optimizes thermal dissipation.\n\u003c\/p\u003e\n\n\u003ch3\u003eAlpha Pro III Regulation and MasterBus Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The alternator is controlled by the included Alpha Pro III regulator (firmware 4.0 or higher). This device uses a three-stage charging cycle (Bulk, Absorption, Float) that compensates for voltage drops and adjusts current based on real-time needs. The system supports all battery chemistries: flooded lead-acid, GEL, AGM, and Lithium-Ion. Native integration with the MasterBus protocol allows configuration of charging parameters, real-time monitoring, event history, and system alarm settings for the power production setup.\n\u003c\/p\u003e\n\n\u003ch3\u003eMechanical Design and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Weighing 7.4 kg, the alternator has a clockwise rotation direction and is mounted via a swivel arm, simplifying installation as a secondary alternator on original PTO mounts. The electronic components and wiring are protected against oil, moisture, and dust. The chassis is uninsulated by default; galvanic isolation requires optional rings. Connection interfaces include two M8 studs for the positive output, an insulated Fast-on terminal for the W signal (tachometer), a Mastervolt-specific port for excitation current, and an RJ12 port for connecting the alternator’s integrated temperature sensor.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723875934548,"sku":"46628110","price":1886.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_6f763b2e-db7b-4a65-b2f8-929446d36744.jpg?v=1778053176"},{"product_id":"mastervolt-alternateur-alpha-compact-28-110-vp-24v-110a","title":"Alpha Compact 28\/110 VP Alternator","description":"\u003cp\u003eThe Mastervolt Alpha Compact 28\/110 VP alternator is a high-performance charging solution designed specifically for demanding marine environments. Operating on a 24V system, it delivers a nominal current of 110 A with an impressive output of 6.2 kW (8.3 HP). Engineered to fit perfectly on Volvo Penta engines via its gimbal arm mounting, this alternator ensures rapid and efficient charging of your battery bank, starting from a generation speed of 1400 RPM and up to a maximum rotation speed of 15000 RPM. Note that this model is supplied without the Alpha Pro III charge regulator, which remains necessary for optimal voltage management.\u003c\/p\u003e\n\u003ch3\u003eThermal design and compactness\u003c\/h3\u003e\n\u003cp\u003eUnlike the classic Alpha series alternators, which are heavier and bulkier, the Alpha Compact range features a patented magnetic design that maintains compact dimensions while withstanding high temperatures. Weighing 7.4 kg, this model includes a dual cooling fan system, allowing it to operate safely up to a maximum temperature of 120 °C. This advanced thermal management ensures continuous energy production, even in the most confined and poorly ventilated engine compartments.\u003c\/p\u003e\n\u003ch3\u003eConnectivity and system integration\u003c\/h3\u003e\n\u003cp\u003eThe electrical installation of the Alpha Compact 28\/110 VP alternator is simplified by robust connections compliant with marine standards. It features two M8 positive output terminals, a W-signal connection via insulated lug, and a dedicated Mastervolt socket for induced current. Temperature monitoring is ensured by an integrated sensor with an RJ12 connector, enabling seamless communication with the electrical network once paired with the appropriate regulator. Although it is not galvanically isolated and rotates clockwise, its mechanical design makes it an ideal upgrade for propulsion systems requiring high charging capacity.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723876098388,"sku":"46228112","price":1655.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_6d912181-5d71-4677-8dcb-1e4cd0c03afe.jpg?v=1778053033"},{"product_id":"mastervolt-alternateur-alpha-compact-28-150-regulateur-alpha-pro-iii","title":"Alpha Compact 28\/150 alternator, Alpha Pro III regulator included","description":"\u003cp\u003e\n    The \u003cstrong\u003eMastervolt Alpha Compact 28\/150\u003c\/strong\u003e alternator (part number 46628150) is a high-capacity 24 V charging system designed for marine and industrial electrical installations. Supplied without a pulley, this model uses a specific magnetic design that reduces its volume by 25 % and its weight by 40 % compared to conventional alternators. It is provided with the external \u003cstrong\u003eAlpha Pro III\u003c\/strong\u003e charge regulator to ensure precise control of the charging cycle for all types of battery banks.\n\u003c\/p\u003e\n\n\u003ch3\u003eElectromechanical and thermal performance\u003c\/h3\u003e\n\u003cp\u003e\n    This model delivers a nominal current of 150 A at 6000 rpm (at 25 °C) and guarantees a production of 28 A at idle engine speed of 1800 rpm. The starting rotation speed is set at 1700 rpm, with a maximum tolerance of 16000 rpm. The mechanical power required on the power take-off (PTO) is 8.4 kW (11.4 hp). Cooled by a double internal fan within an open structure, the alternator supports an operating temperature of up to 120 °C. An integrated temperature probe with RJ12 connection ensures active thermal regulation. The electrical connections include two M8 positive output terminals, an isolated W-signal connection for the tachometer, and a proprietary Mastervolt connector for the excitation current. The net weight of the alternator is 7.9 kg, with a total packaged weight of 11.4 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eAlpha Pro III regulation and MasterBus integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAlpha Pro III\u003c\/strong\u003e regulator controls the output voltage via a three-stage charging algorithm (Bulk, Absorption, Float). This device compensates for temperature and optimizes charging for lead-acid, Gel, AGM, and lithium-ion batteries. The absorption phase is automatically timed (approximately 30 minutes for lithium-ion technology) before switching to float voltage. This regulator natively integrates the MasterBus communication protocol, enabling configuration of voltage thresholds, real-time charge data monitoring, and alarm management directly from the onboard network.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning within the range and comparison\u003c\/h3\u003e\n\u003cp\u003e\n    Within the \u003cstrong\u003eMastervolt\u003c\/strong\u003e catalog, the Alpha Compact series stands out from the standard Alpha range with an optimized power-to-size ratio and an estimated 30 % reduction in fuel consumption. Compared to competing equipment such as the 24 V Balmar XT series, the \u003cstrong\u003eMastervolt Alpha Compact 28\/150\u003c\/strong\u003e offers the advantage of direct software integration thanks to the regulator's native MasterBus network, eliminating the need for additional data conversion gateways. Its lightweight design is specifically intended for cramped engine compartments requiring high continuous charging power, where a traditional 150 A alternator would be too heavy or bulky.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723876294996,"sku":"46628150","price":2288.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_a3d5ed0c-6966-44f4-b8cd-0a0e7bb3e810.jpg?v=1778053194"},{"product_id":"mastervolt-alternateur-alpha-compact-28-150-sans-poulie","title":"Alpha Compact 28\/150 alternator (without pulley)","description":"\u003cp\u003eMastervolt’s Alpha Compact 28\/150 alternator is a high-performance charging solution designed for vessels equipped with large-capacity 24V battery banks. With a 150-amp output current, this model ensures fast and optimal recharging, even at low engine speeds.\u003c\/p\u003e\n\n\u003ch3\u003eCompact design and power-to-weight ratio\u003c\/h3\u003e\n\u003cp\u003eDistinct from the standard Alpha series due to its reduced footprint, the Alpha Compact range was developed to fit in tight engine compartments. Weighing just 7.9 kg, this 28\/150 model delivers exceptional power density. Its internal architecture promotes efficient thermal cooling, allowing it to sustain high continuous charging currents without overheating the generator.\u003c\/p\u003e\n\n\u003ch3\u003eSystem integration and compatibility\u003c\/h3\u003e\n\u003cp\u003eThis specific model ships without a pulley, providing the technical flexibility to install a custom pulley, such as a multi-groove (serpentine) belt, perfectly aligned with your engine’s mechanical configuration. To fully utilize its capabilities and ensure battery safety (especially for Lithium-Ion banks), this alternator must be paired with an external charge regulator such as the Mastervolt Alpha Pro, which guarantees a 3-stage smart charging cycle and rigorous thermal protection of the system.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723876458836,"sku":"46228150","price":1901.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/alternateur-alpha-compact-28150-sans-poulie_46228150-1.jpg?v=1776349492"},{"product_id":"mastervolt-alternateur-alpha-compact-28-150-volvo-penta-24v","title":"Alpha Compact 28\/150 Volvo Penta alternator","description":"\u003ch3\u003eOverview of the Alpha Compact 28\/150 alternator for Volvo Penta\u003c\/h3\u003e\n\u003cp\u003e\n    The Mastervolt Alpha Compact 28\/150 alternator (part number 46228152) is designed for continuous power generation in marine and industrial environments. This 24 VDC model is specifically sized for direct mounting on Volvo Penta engines in the D4 to D13 series. It can be used as a primary replacement alternator or as a secondary power take-off (PTO) alternator dedicated to charging a service battery bank. This unit is supplied without the Alpha Pro III charge regulator, which is a mandatory component for managing output voltage and current.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical performance and raw data\u003c\/h3\u003e\n\u003cp\u003e\n    The alternator delivers a nominal charge current of 150 A at 6,000 rpm (at 25 °C). Its excitation speed is set at 1,700 rpm, allowing it to provide a current of 28 to 30 A at an alternator rotation speed of 1,800 rpm (corresponding to engine idle speed). The maximum tolerated rotation speed is 16,000 rpm. The absorbed mechanical power (PTO) is 8.4 kW (11.4 hp), with a mechanical-to-electrical conversion efficiency of approximately 50 %. The maximum operating temperature reaches 120 °C, monitored by an integrated temperature probe with an RJ12 connection.\n\u003c\/p\u003e\n\n\u003ch3\u003eMechanical design and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Alpha Compact 28\/150 weighs 7.9 kg. Its internal architecture reduces weight by 40 % and volume by 25 % compared to conventional alternators of the same capacity. Cooling is provided by two internal fans, requiring installation with a clockwise rotation direction (viewed from the pulley side). This specific model includes a multi-groove belt pulley suitable for Volvo Penta blocks as standard and is mounted via a pivoting arm. The unit is non-insulated (the negative output is connected to the metal housing). For installations requiring galvanic isolation, an optional insulating bushing kit (part number 48420240) is available, changing the mounting hole diameter from M10 to M8 or from M12 to M10. Electrical connections are made via two M8 studs for the positive output, an insulated fast-on connector for the W signal (tachometer), and a proprietary Mastervolt connector for the excitation current.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the Mastervolt range and comparison\u003c\/h3\u003e\n\u003cp\u003e\n    Within the Navico Group offering, the Alpha Compact series stands out from standard Alpha alternators (such as the Alpha 24\/110 or Alpha 24\/150 IV models) due to its compact format, the use of unidirectional internal fans instead of an external bidirectional fan, and a non-insulated base design. Unlike universal Alpha Compact versions, which are supplied without a pulley, this VP variant is ready for use with Volvo Penta engines. Combined with the Alpha Pro III regulator (sold separately), this system differs from original equipment alternators by applying a 3-stage charging algorithm compatible with lead-acid and lithium-ion battery banks, while offering full integration with the MasterBus communication protocol.","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723876655444,"sku":"46228152","price":1875.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_0e514e82-3d7a-4d9c-83d3-24612f7e21fe.jpg?v=1778053068"},{"product_id":"mastervolt-capteur-temperature-alternateur-cable-2m","title":"Alternator temperature sensor 2 m cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eMastervolt alternator temperature sensor\u003c\/strong\u003e, part number 41500400, is an essential component for monitoring and protecting your marine charging system. Designed specifically to be used in conjunction with Mastervolt’s Alpha Pro charge regulator, it ensures optimal thermal management of your alternator, regardless of brand.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced protection against overheating\u003c\/h3\u003e\n\u003cp\u003e\n    This temperature sensor plays a critical role in preventing alternator overheating risks. When the Alpha Pro is paired with alternators from manufacturers other than Mastervolt, this sensor provides an additional layer of safety. It transmits real-time temperature data to the Alpha Pro regulator, enabling the latter to adjust the charging process to avoid thermal damage and extend equipment lifespan. This feature is particularly relevant for installations where thermal management is not natively integrated or sufficient on third-party alternators.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    With its 2-meter cable, the \u003cstrong\u003eMastervolt alternator temperature sensor\u003c\/strong\u003e offers installation flexibility to adapt to various engine compartment configurations. While its primary function is to protect the alternator, it also contributes to optimizing charging efficiency by allowing the Alpha Pro regulator to operate under ideal thermal conditions. Compared to a complete absence of temperature monitoring, this sensor significantly enhances the reliability of your boat’s electrical power system. It represents a minimal investment for maximum protection of costlier components such as the alternator and batteries.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723881046356,"sku":"41500400","price":22.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_4b687625-1b43-45df-bb5e-4dfd3790859e.jpg?v=1778020085"},{"product_id":"mastervolt-poulie-multi-gorges-6-alternateur-alpha","title":"Multi-groove pulley (6) for Alpha 24\/110 and Alpha 24\/150","description":"\u003cp\u003e\n    The \u003cstrong\u003eMastervolt 6-groove multi-groove pulley (6)\u003c\/strong\u003e is an essential replacement component designed specifically to maintain optimal performance of Alpha series marine alternators. This pulley, featuring six grooves, ensures reliable and efficient power transmission between the engine and the alternator, thereby contributing to stable onboard power generation.\n\u003c\/p\u003e\n\u003ch3\u003eCompatibility and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Designed as a direct replacement part, this pulley is compatible with several Mastervolt Alpha alternator models, including versions \u003cstrong\u003eAlpha 12\/130\u003c\/strong\u003e, \u003cstrong\u003eAlpha 24\/75\u003c\/strong\u003e, \u003cstrong\u003eAlpha 24\/110\u003c\/strong\u003e, and \u003cstrong\u003eAlpha 24\/150\u003c\/strong\u003e. Unlike complete alternators such as the Mastervolt Alpha Pro models or competing ranges from Balmar or Victron Energy, this pulley serves as a preventive or corrective maintenance component, essential for extending the lifespan of your existing equipment. It ensures precise adaptation and performance compliant with the manufacturer's original specifications.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Importance\u003c\/h3\u003e\n\u003cp\u003e\n    Using an \u003cstrong\u003eoriginal Mastervolt\u003c\/strong\u003e pulley is crucial to avoid misalignments, premature belt wear, and efficiency losses. A worn or damaged pulley can lead to inefficient battery charging and potential failures in the electrical system. This component is therefore vital for the reliability of your marine electrical installation, ensuring that your Alpha alternator continues to operate at full capacity under the demanding conditions of the marine environment.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723888845140,"sku":"48400030","price":26.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_de2f28ac-18c7-40c1-8dfd-70c379f00a01.jpg?v=1778021497"},{"product_id":"mastervolt-poulie-multi-gorges-8-48-1mm-electricite-marine","title":"Multi-groove pulley (8) Ø 48.1 mm","description":"\u003cp\u003e\n    The \u003cstrong\u003eMastervolt 8-groove pulley (Ø 48.1mm)\u003c\/strong\u003e is a critical mechanical component designed for power generation systems aboard vessels. Manufactured by Mastervolt, a recognized leader in marine electrical solutions, this pulley is specifically engineered to ensure reliable and efficient power transmission.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This pulley features an \u003cstrong\u003e8-groove configuration\u003c\/strong\u003e, optimized for stable belt drive operation and minimal slippage, which is crucial for alternators and other rotating equipment. With a \u003cstrong\u003ediameter of 48.1 mm\u003c\/strong\u003e and a \u003cstrong\u003ewidth of 39.4 mm\u003c\/strong\u003e, it is sized for precise integration into Mastervolt charging systems. Its robust design ensures excellent durability and resistance to common mechanical stresses in marine environments.\n\u003c\/p\u003e\n\u003ch3\u003ePosition in the Mastervolt Range\u003c\/h3\u003e\n\u003cp\u003e\n    As a spare part, this pulley is part of Mastervolt’s energy solutions ecosystem, ensuring compatibility and optimal performance with the brand’s alternators and energy management systems. Unlike more complex units such as Alpha alternators or Mass Combi chargers, this pulley is a fundamental component of the drivetrain, providing the essential mechanical link. Its role is comparable to that of an alternator pulley in competitors like Balmar or Victron Energy, but it is specifically tailored to the high-performance and reliability requirements of Mastervolt equipment. It is not an obsolete product but a maintenance or replacement component for existing systems or new installations.","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723888910676,"sku":"48420170","price":58.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_a8ab84ba-7d18-49dd-bfd0-19db0bdd3a8f.jpg?v=1778021525"},{"product_id":"mastervolt-poulie-multi-gorges-8-diametre-56mm-alternateur","title":"Multi-groove pulley (8) Ø 56 mm","description":"\u003cp\u003e\n    The Mastervolt \u003cstrong\u003e8-groove multi-groove pulley (8) Ø56mm\u003c\/strong\u003e, part number 48420140, is a precision mechanical component designed for marine power generation systems. This pulley is specifically sized with a 56 mm diameter and a 38.9 mm width, featuring eight grooves for optimal and stable power transmission. It aligns with Mastervolt’s philosophy of ensuring energy independence aboard vessels.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    Manufactured in Germany, this Mastervolt pulley is a critical spare part for the brand’s alternators. Its multi-groove design ensures better grip and uniform load distribution, reducing belt wear and extending the lifespan of the entire drive system. Compared to simpler pulley designs or those with fewer grooves, this configuration delivers increased efficiency and superior reliability in demanding marine environments. While Mastervolt offers an extensive range of electrical equipment, this pulley serves as a specific replacement part, ensuring compatibility and original performance for existing Mastervolt installations.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Integrating this pulley into an existing Mastervolt system is straightforward, as it is designed as an exact replacement part. Mastervolt is recognized for the robustness and reliability of its equipment, and this pulley is no exception. It is essential for maintaining the performance of Mastervolt alternators and generators, preventing failures caused by wear in transmission components. Unlike generic brands, using original Mastervolt parts ensures that technical specifications and manufacturing tolerances are met, which is critical for the longevity and safety of marine electrical installations. This product is offered without additional accessories, focusing solely on providing the replacement part itself.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723889074516,"sku":"48420140","price":214.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_44be13cf-6101-4d9c-b195-9448917b20f7.jpg?v=1778021512"},{"product_id":"mastervolt-regulateur-charge-alpha-pro-iii-electricite","title":"Alpha Pro III Charge Controller","description":"\u003cp\u003e\n    The \u003cstrong\u003eAlpha Pro III charge regulator\u003c\/strong\u003e from Mastervolt (reference 45513000) is a sophisticated charge management solution designed to optimize the performance of standard and high-performance alternators in marine and vehicle systems. Based on ten years of experience and evolution, this regulator provides fast and safe charging of service batteries from the propulsion engine while protecting the entire system. It features a modernized style, increased power, and improved ease of use compared to previous Alpha Pro generations.\n\u003c\/p\u003e\n\n\u003ch3\u003eCharge performance optimization and system protection\u003c\/h3\u003e\n\u003cp\u003e\n    The Alpha Pro III converts any alternator into an advanced 3-stage charger (Bulk, Absorption, Float) with thermal control, compatible with lead-acid (flooded, gel, AGM) and lithium-ion batteries. Unlike standard alternator regulators, which are often undersized for charging service batteries, the Alpha Pro III ensures optimal charging, preventing overheating and overcharging to extend battery life. It can handle induced currents up to 20 A, allowing it to control high-power alternators, including models from 200 A to 400 A, and even up to 600 A for certain tested Delstar alternators.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features and MasterBus integration\u003c\/h3\u003e\n\u003cp\u003e\n    This advanced regulator continuously measures battery temperature and voltage for temperature-compensated charging, with an adjustment of -30 mV\/°C (-17 mV\/°F) and voltage drop compensation up to 3 V in DC cables. The absorption time is adjustable from 2 minutes to 12 hours, with a default setting of 4 hours. An intelligent \"keep alive\" function ensures reliable tachometer readings by sending engine RPM values over the MasterBus network, alongside alternator status and charge level. The Alpha Pro III is compatible with 12 V and 24 V systems and fully integrates with Mastervolt’s MasterBus, simplifying wiring and optimizing cooperation with other Mastervolt equipment. It comes with 6-meter battery temperature sensors and dedicated connections for Mastervolt and Bosch alternators (via adapter 45510500). Its compact dimensions (90 x 109 x 30 mm) and 0.4 kg weight, combined with fanless cooling, make installation in demanding marine environments straightforward.","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723889500500,"sku":"45513000","price":331.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_a7fe6e8f-62d7-4643-85f9-51bce6ba5517.jpg?v=1778021342"},{"product_id":"mastervolt-regulateur-charge-solaire-scm60-mppt-mb","title":"SCM60 MPPT-MB Solar Charge Controller","description":"\u003cp\u003e\n    The \u003cstrong\u003eMastervolt SCM60 MPPT-MB solar charge controller\u003c\/strong\u003e is the most powerful in its range, designed for medium to large-scale marine solar installations. This MPPT (Maximum Power Point Tracking) controller optimizes the energy production of your solar panels, enabling battery charging up to 30% faster than conventional controllers with equivalent solar modules. It automatically adapts to 12, 24, or 48 V battery systems and accepts a solar input power ranging from 600 to 3600 Wp.\n\u003c\/p\u003e\n\n\u003ch3\u003eExtended performance and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    With a maximum PV input voltage of 145 V, the SCM60 MPPT-MB supports various types of solar panels, including 36, 60, and 72-cell models. This ability to connect multiple panels in series significantly reduces the required cable lengths, minimizing power losses and simplifying installation. Its maximum efficiency exceeds 98%, with a maximum power point (MPP) efficiency of 99.9%, ensuring optimal energy conversion. The maximum charge current is 60 A at 40°C, with a nominal PV current of 50 A at the same temperature. It is protected against overvoltages on the solar input and induced overvoltages from storms.\n\u003c\/p\u003e\n\n\u003ch3\u003eMasterBus integration and advanced safety\u003c\/h3\u003e\n\u003cp\u003e\n    The SCM60 MPPT-MB natively integrates with Mastervolt’s \u003cstrong\u003eMasterBus\u003c\/strong\u003e network, offering advanced centralized monitoring and control functions. This connectivity enables advanced automation of your energy system, such as triggering a water heater or direct management of lithium-ion batteries without external relays. The controller features a robust housing with an IP23 protection rating, protecting it against condensation. It includes comprehensive protections against overcharging, battery voltage drops and spikes, overheating, short circuits, reverse polarity, and transient overvoltages, ensuring high operational safety. A battery temperature sensor is included to optimize charge profiles and extend battery life.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and ease of use\u003c\/h3\u003e\n\u003cp\u003e\n    This charge controller is designed for passive cooling, ensuring silent operation. Its backlit LCD display provides clear information on PV power, charging status, battery voltage, charge current, alarms, and state of charge. Charge profiles are pre-programmed for AGM, gel, flooded, and lithium-ion batteries and can be selected via the display or the MasterBus network. The SCM60 MPPT-MB is a reliable and high-performance solution for optimizing your onboard solar energy production, with an ambient temperature range of -20°C to 55°C.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723889959252,"sku":"131906000","price":509.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d640b49b-066f-4080-b2ad-1cbb295bce3e.jpg?v=1778019582"},{"product_id":"bep-vsr-dig-12-24v-mc20-relais-batterie","title":"VSR digital 12\/24 V 140 A","description":"\u003cp\u003eThe \u003cstrong\u003eBEP VSR DIG 12\/24V MC20\u003c\/strong\u003e is a digital voltage sensing relay (DVSR) designed for automatic and reliable management of dual batteries aboard. Unlike older analog relays such as the BEP 710-125A it replaces, this model integrates digital technology that provides increased precision in trigger thresholds and reduced power consumption. It ensures priority charging of the starter battery before automatically combining the service battery, thus protecting the engine against unintended discharge.\u003c\/p\u003e\n\n\u003ch3\u003eDigital technology and voltage versatility\u003c\/h3\u003e\n\u003cp\u003eThe DVSR stands out for its ability to operate in both 12V and 24V DC with automatic selection, making it ideal for a wide range of vessels, from small sailboats to motorboats. Its digital design guarantees precise switching at programmed voltages: engagement at 13.4V (12V) \/ 26.8V (24V) and disengagement at 12.8V (12V) \/ 25.6V (24V). Compared to a simple coupler or diode isolator, it introduces no voltage drop, maximizing alternator charging efficiency.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and current capacity\u003c\/h3\u003e\n\u003cp\u003eWith a continuous current capacity of \u003cstrong\u003e125 A\u003c\/strong\u003e and an intermittent current of \u003cstrong\u003e140 A\u003c\/strong\u003e, this relay is suitable for most onboard charging systems. Its robust design, certified to UL 1107 and CE standards, ensures long-term reliability in demanding marine environments.\u003c\/p\u003e\n\n\u003ch3\u003eLow standby consumption and storage mode\u003c\/h3\u003e\n\u003cp\u003eA key advantage of this digital model is its extremely low standby consumption of just \u003cstrong\u003e1.8 mA\u003c\/strong\u003e (1.6 mA at 24V). Additionally, thanks to an optional switching circuit, it can be placed in storage mode at \u003cstrong\u003e0 W\u003c\/strong\u003e, which is essential for preserving the battery during winter storage or long periods of inactivity—a feature absent in older models.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and system integration\u003c\/h3\u003e\n\u003cp\u003eThe VSR DIG 12\/24V MC20 connects simply with three wires, leaving the alternator wiring intact. It comes with an optional output for a remote status LED indicator, enabling easy monitoring of battery combination status. It can also be paired with an ignition switch to activate storage mode, offering maximum integration flexibility.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721049489748,"sku":"710-140A","price":70.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/fvdffwhd_710-140A_HR.jpg?v=1778055432"},{"product_id":"bep-cluster-batterie-714-140a-dvsr-gestion-batterie","title":"Battery cluster 714-140A-DVSR","description":"\u003cp\u003eThe \u003cstrong\u003eBEP 714-140A-DVSR battery distribution cluster\u003c\/strong\u003e is an all-in-one solution for power management on single-engine vessels equipped with two battery banks. By integrating a dual voltage sensing relay (DVSR) directly into a compact housing, this system advantageously replaces the separate installation of a battery switch and a charging relay. The result is simplified wiring, reduced footprint, and increased reliability, all in a design built to withstand the most demanding marine environments. This model is part of BEP’s 700 series, known for its modularity and compliance with ABYC standards.\u003c\/p\u003e\n\n\u003ch3\u003eAutomatic and intelligent charge management\u003c\/h3\u003e\n\u003cp\u003eThe core of the system is the integrated DVSR (Dual Sensing Voltage Sensitive Relay). When the engine is running and the service battery voltage reaches 13.4 V (12 V system), the relay automatically closes, connecting both battery banks for simultaneous charging. As soon as the voltage drops to 12.8 V (engine off), the relay opens, isolating the reserve battery. This automatic management ensures you always have a fully charged reserve battery for engine starting or powering safety equipment. The system is designed to operate in both 12 V and 24 V systems, with automatic voltage selection.\u003c\/p\u003e\n\n\u003ch3\u003eSimplified installation and marine-grade robustness\u003c\/h3\u003e\n\u003cp\u003eWith dimensions of 138 x 69 x 75 mm, the 714-140A-DVSR cluster is significantly more compact than traditional solutions consisting of separate switches and relays. It is molded from high-strength fiber-reinforced plastic, offering excellent heat resistance and chemical resistance, ideal for marine environments and recreational vehicles. The system can be configured to operate only when the engine ignition is on, reducing electrical consumption to zero amperes when the engine is off. This feature is a major advantage for battery preservation during storage periods.\u003c\/p\u003e\n\n\u003ch3\u003eComparison with competitors\u003c\/h3\u003e\n\u003cp\u003eCompared to basic solutions like a simple manual battery switch (e.g., BEP 701-S), this cluster provides complete automation of charging, eliminating the risk of oversight and ensuring a reserve battery is always ready. Compared to more complex systems like multi-bank chargers, the 714-140A-DVSR offers a simpler and more economical solution for single-engine boats, focusing on the essential function of load sharing. It stands out for its integrated design and UL 1107 certification, a mark of safety and compliance.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721049948500,"sku":"714-140A-DVSR","price":110.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/b30435t7_img-02.jpg?v=1778055446"},{"product_id":"bep-cluster-distribution-batterie-triple-moteur-4-parcs-719-140a-dvsr","title":"Cluster 3 engines 4 banks DVSR 140 A","description":"\u003cp\u003e\n    The BEP 719-140A-DVSR battery distribution cluster is an integrated solution designed for complex marine installations, specifically for boats equipped with three outboards and four battery banks. This centralized system simplifies power management by integrating a 701 battery switch and three 710-125A voltage-sensitive relays (VSR), enabling automated distribution and charging of starting and service batteries.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and robustness of the BEP 719-140A-DVSR\u003c\/h3\u003e\n\u003cp\u003e\n    The 719-140A-DVSR cluster is rated for demanding applications, with a nominal voltage of 48 Volts DC. The integrated main switch offers a continuous DC current capacity of 275 amperes, 455 amperes intermittent, and a starting capacity of 1250 amperes DC. Each 710-125A VSR relay handles a nominal current of 125 amperes DC, ensuring efficient and secure charging. The entire cluster has a nominal current of 100 amperes DC. The design ensures water resistance, non-submersibility, and hermetic sealing, making it suitable for the marine environment. It is also UL 1107 certified, attesting to its compliance with safety and performance standards. Installation is flexible, allowing flush or surface mounting via 2 x 3\/8” (10mm) mounting studs.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and market positioning\u003c\/h3\u003e\n\u003cp\u003e\n    Compared to modular solutions where each component (switch, VSR) would be installed separately, the BEP 719-140A-DVSR offers a pre-wired integration, reducing installation time and complexity. While the context does not provide details on other BEP clusters or direct competitors, this product positions itself as a high-end solution for multi-engine and multi-battery configurations, offering reliable and automated power management. It is particularly suited to vessels requiring high energy availability and simplified wiring, where systems such as those from Victron Energy or Mastervolt may offer more complex architectures or individual components. The 719-140A-DVSR stands out for its all-in-one proposition for a specific and demanding use case.\n\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721059615060,"sku":"719-140A-DVSR","price":559.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/b3044a9s_img-01.jpg?v=1778055590"},{"product_id":"victron-energy-smartsolar-mppt-rs-450-100-mc4-controleur-solaire","title":"SmartSolar MPPT RS 450\/100-MC4","description":"\u003cp\u003e\n    The Victron Energy SmartSolar MPPT RS 450\/100-MC4 solar charge controller is designed for large-scale photovoltaic systems using panels connected in series to charge 48 V batteries. It features ultra-fast MPPT technology to optimize solar energy harvesting under various conditions, making it suitable for both standalone and grid-connected installations.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Capabilities and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This model supports a battery voltage of 48 V and a nominal charge current of 100 A, allowing continuous charging power up to 5,760 W at 57.6 V. It handles a maximum DC PV voltage of 450 V and features two independent MPPT trackers, each with a maximum operating PV input current of 16 A and a maximum PV short-circuit current of 20 A. The maximum PV array size per tracker is 7,200 Wp. Maximum efficiency reaches 96%.\n    Unlike BlueSolar models that require an external Bluetooth dongle, the SmartSolar MPPT RS 450\/100-MC4 has integrated Bluetooth for configuration and monitoring via the VictronConnect app. It also includes VE.Can bus ports for daisy-chaining up to 25 units and communication with a GX device, as well as a VE.Direct port. An integrated display on the front panel provides essential information.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and Installation Flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    The controller ensures galvanically isolated PV connections for enhanced safety. It provides protection against PV reverse polarity, output short circuits, and overheating. An active cooling system with variable-speed fans maintains full nominal power up to an ambient temperature of 40°C. Its protection class is IP21.\n    Battery charge parameters are fully programmable, adapting to various battery chemistries, including lead-acid and lithium, with adjustable absorption, float, and equalization voltages. It includes a programmable relay, auxiliary inputs\/outputs, a digital input, and connections for a voltage sensor. Continuous monitoring of PV insulation resistance detects potential faults, reporting errors to a connected GX device if present. Its dimensions are 440 x 313 x 126 mm and it weighs 7.9 kg.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786771611988,"sku":"SCC145110512","price":882.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-iPhone-SmartSolar-settings.jpg?v=1778604039"},{"product_id":"victron-energy-smartsolar-mppt-150-35-regulateur-charge-solaire","title":"SmartSolar MPPT 150\/35","description":"\u003cp\u003e\n    Designed to optimize solar energy harvesting, the VICTRON ENERGY SmartSolar MPPT 150\/35 charge controller is an advanced solution for 12V, 24V, 36V, and 48V systems. It stands out for its ultra-fast MPPT technology, capable of improving energy recovery by up to 30% compared to PWM controllers and up to 10% compared to slower MPPT controllers, especially under cloudy skies or during light intensity variations. Its advanced maximum power point (MPP) tracking ensures optimized energy production, even in partial shading, by identifying the global MPP rather than local points.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced efficiency and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar MPPT 150\/35 offers a conversion efficiency above 98%, with no cooling fan, and maintains its nominal output current up to 40 °C. Its built-in Bluetooth Smart connectivity enables configuration, control, and firmware updates via the VictronConnect app. For wired integration, a VE.Direct port is available, allowing communication with Victron Energy GX products, PCs, or other devices. These communication options provide superior flexibility compared to more basic controllers that only offer a local or proprietary interface.\n\u003c\/p\u003e\n\u003ch3\u003eFlexible charging algorithm and protections\u003c\/h3\u003e\n\u003cp\u003e\n    The charging algorithm is fully programmable and offers eight pre-programmed options selectable via a rotary switch, providing adaptability to various battery types, including lithium, AGM, gel, and open lead-acid. It includes a function for recovering fully discharged batteries, even at zero volts, and can reconnect Li-ion batteries with an integrated disconnect function. The controller features comprehensive electronic protections: against overheating (with power reduction), PV short circuits, PV polarity reversal, and PV reverse current. An internal temperature sensor adjusts absorption and floating charge voltages to optimize battery lifespan. External battery voltage and temperature sensors are also supported via Bluetooth (Smart Battery Sense or BMV-712 Smart Battery Monitor) for increased accuracy.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786776068436,"sku":"SCC115035210","price":140.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-35-front.jpg?v=1778604180"},{"product_id":"victron-energy-smartsolar-mppt-ve-can-controleur-charge","title":"SmartSolar MPPT VE.Can 250\/70 Tr RS","description":"\u003cp\u003e\n    The Victron Energy SmartSolar MPPT VE.Can charge controller, identified by SKU SCC125070521, is designed to optimize solar panel energy harvesting and ensure efficient charging of battery banks. This model features ultra-fast MPPT technology that, in cloudy conditions or varying light intensity, can improve energy production by up to 30% compared to PWM controllers and up to 10% compared to slower MPPT controllers.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Solar Energy Management\u003c\/h3\u003e\n\u003cp\u003e\n    This controller is equipped with advanced maximum power point (MPP) tracking, essential in cases of partial shading where multiple MPPs may exist. Its innovative algorithm ensures constant locking onto the optimal MPP, maximizing energy input. With a conversion efficiency exceeding 98%, the SmartSolar MPPT VE.Can operates without a cooling fan, ensuring increased durability and low standby consumption (less than 35 mA at 12 V and 20 mA at 48 V). It manages battery voltages of 12 V, 24 V, 36 V (manual), and 48 V with automatic detection, and accepts maximum PV open-circuit voltages of 150 V.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The VE.Can functionality allows synchronization of up to 25 charge controllers for coordinated battery bank management, offering significant expansion capacity. This interface also facilitates connection to a Color Control GX or other GX devices for individual monitoring and integration with the Victron Remote Management (VRM) portal. Additionally, integrated Bluetooth Smart enables wireless configuration and monitoring via the VictronConnect app, as well as synchronization of up to 10 units. A VE.Direct connection is also available for wired communications with GX devices or PCs. SmartSolar MPPT VE.Can models differ from non-VE.Can SmartSolar models by their ability to form larger controller networks and integrate more deeply into complex systems requiring the CAN-bus protocol, such as managing third-party smart batteries via VE.Can to CAN-bus BMS cables.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and Protections\u003c\/h3\u003e\n\u003cp\u003e\n    The controller offers a fully programmable charging algorithm, complemented by eight selectable presets. It can recover fully discharged batteries, including Li-ion batteries with integrated disconnect function. Comprehensive electronic protections are included: overheating protection with power reduction, PV short-circuit, PV reverse polarity, and PV reverse current. An internal temperature sensor and the ability to connect external voltage\/temperature\/current sensors (via Smart Battery Sense, BMV-712 Smart, or SmartShunt) ensure compensated and optimized charging. A programmable relay and remote on\/off function complete the feature set.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786792550740,"sku":"SCC125070521","price":398.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-85-MC4-VE-Can-front-angle.jpg?v=1778604294"},{"product_id":"victron-energy-smartsolar-mppt-250-60-tr-regulateur-solaire","title":"SmartSolar MPPT 250\/60-Tr","description":"\u003cp\u003e\n    The Victron Energy SmartSolar MPPT 250\/60-Tr charge controller is designed to optimize solar panel energy harvesting and battery charging. It features ultra-fast MPPT technology that improves energy recovery by up to 30% compared to PWM controllers and up to 10% compared to slower MPPT controllers, particularly under cloudy skies or during light intensity changes. Its advanced maximum power point (MPP) tracking algorithm ensures maximum power output even in partial shading, avoiding lock-in on suboptimal local MPPs.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    This 250\/60-Tr model handles maximum PV voltages of 250 VDC and a nominal charge current of 60 A. It supports nominal PV power ratings up to 860 W for 12 V systems, 1720 W for 24 V, 2580 W for 36 V, and 3440 W for 48 V. Conversion efficiency exceeds 99%, with no cooling fan required, ensuring silent operation. Flexibility is provided by a fully programmable charging algorithm, complemented by eight selectable presets via a rotary switch. It includes extensive electronic protection against overheating (with power derating), PV short circuits, PV polarity reversal, and PV reverse current.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar MPPT 250\/60-Tr features integrated Bluetooth Smart for configuration, monitoring, and firmware updates via the VictronConnect app. The VE.Direct port enables wired connection to devices such as the Color Control GX, other GX products, or a PC. An internal temperature sensor compensates for charging voltages, and a programmable relay can be configured to trigger alarms or other events. The fully discharged battery recovery function allows charging to begin even if the battery is at zero volts. This model can be synchronized with up to 10 units via Bluetooth for parallel charging and is compatible with lithium batteries. It is also compatible with an optional plug-in SmartSolar Control LCD display for direct monitoring and configuration.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786800939348,"sku":"SCC125060221","price":323.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-250-60-Tr-PT01.jpg?v=1778604453"},{"product_id":"victron-energy-smartsolar-pluggable-display-afficheur","title":"SmartSolar Pluggable Display","description":"\u003cp\u003e\n    The \u003cstrong\u003eSmartSolar Pluggable Display\u003c\/strong\u003e by VICTRON ENERGY (reference SCC900650010) is an optional display designed for direct monitoring of SmartSolar MPPT solar charge controllers. This accessory plugs natively and without additional wiring into the housing of larger SmartSolar models, providing immediate visualization of photovoltaic system performance data.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and positioning within the Victron Energy range\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar Pluggable Display differs from other monitoring solutions offered by VICTRON ENERGY by its direct physical integration. Unlike the VictronConnect app, which uses the SmartSolar controllers' built-in Bluetooth or a VE.Direct Bluetooth Smart dongle for BlueSolar models, this display provides a visual interface without wireless or external connection. It also differs from the MPPT Control display, which requires a VE.Direct cable for connection. The SmartSolar Pluggable Display is specifically compatible with higher-power SmartSolar MPPT controllers, such as the 150\/60-Tr, 150\/70-Tr VE.Can, or 250\/60-Tr models, which support both MPPT Control and SmartSolar Control Display, unlike more compact models like the 75\/10 or 100\/15, which only list the MPPT Control as a display option.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and use cases\u003c\/h3\u003e\n\u003cp\u003e\n    This display allows users to quickly access essential charge information without needing a smartphone, tablet, or external GX device (such as a Color Control GX, Venus GX, Octo GX, or Cerbo GX). It is ideal for installations where local and instant visual control is prioritized, complementing remote monitoring capabilities via the VE.Direct port or VE.Can port (on certain models) to a GX device and the VRM portal. The SmartSolar Pluggable Display simplifies access to solar production data and battery status directly on the equipment, improving ergonomics for daily checks or on-site adjustments.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786864640340,"sku":"SCC900650010","price":24.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-100-15-front.jpg?v=1778605014"},{"product_id":"victron-energy-ve-can-interface-communication-mppt","title":"SmartSolar MPPT VE.Can 150\/70 MC4","description":"\u003cp\u003e\n    Victron Energy’s \u003cstrong\u003eVE.Can\u003c\/strong\u003e communication protocol is an advanced interface designed to optimize the management of marine and standalone power systems. It enables robust interconnection and precise coordination between Victron Energy components, particularly SmartSolar MPPT charge controllers. This networking capability is critical for complex installations requiring unified energy management.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced synchronization and management\u003c\/h3\u003e\n\u003cp\u003e\n    Integrating \u003cstrong\u003eVE.Can\u003c\/strong\u003e into SmartSolar MPPT solar charge controllers, such as the 150\/70, 150\/85, or 150\/100 models, provides parallel synchronization features. This interface allows up to 25 units to be daisy-chained, ensuring all controllers operate in phase—whether in bulk, absorption, or float charging. This functionality exceeds Bluetooth synchronization limits (10 units) and enables efficient load distribution. Unlike standalone controller setups that may not coordinate charging phases, this approach extends battery life and improves overall system efficiency. Monitoring and control are centralized via a GX device like the Color Control GX or remotely via the Victron Remote Management (VRM) portal.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Products integrating \u003cstrong\u003eVE.Can\u003c\/strong\u003e, such as SmartSolar MPPT chargers, deliver over 98% conversion efficiency and ultra-fast maximum power point tracking (MPPT) technology. The latter improves energy harvest by up to 30% compared to PWM controllers and 10% compared to slower MPPT controllers, particularly under cloudy conditions or partial shading. \u003cstrong\u003eVE.Can\u003c\/strong\u003e also facilitates the transmission of critical data (voltage, temperature, battery current) from external sensors or smart battery monitors (Smart Battery Sense, BMV-712 Smart, SmartShunt) to charge controllers, enabling fully programmable or pre-set adaptive charging algorithms (8 selectable presets). Extended electronic protections against overheating, PV short-circuit, and PV polarity reversal ensure system reliability. The VE.Can protocol is thus a cornerstone for Victron Energy systems requiring high performance and scalability.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786884727124,"sku":"SCC115070411","price":315.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-85-MC4-VE-Can-front-angle_7be6d750-7a08-4136-add7-511679a7fda1.jpg?v=1778605250"},{"product_id":"victron-energy-smartsolar-mppt-250-70-tr-regulateur-solaire","title":"SmartSolar MPPT 250\/70-Tr","description":"\u003cp\u003e\n    Designed to optimize solar energy harvesting, the Victron Energy SmartSolar MPPT 250\/70-Tr charge controller is a solution for marine and land-based photovoltaic systems requiring efficient management. This controller features ultra-fast MPPT (Maximum Power Point Tracking) technology, capable of improving energy production by up to 30% compared to PWM controllers and up to 10% compared to slower MPPT controllers, particularly under cloudy skies where light intensity varies constantly.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Energy Efficiency\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar MPPT 250\/70-Tr automatically manages battery voltages of 12V, 24V, or 48V, with manual configuration possible for 36V systems. It delivers a nominal charging current of 70 A and supports PV power up to 1000 W for 12V batteries, 2000 W for 24V, 3000 W for 36V, and 4000 W for 48V. Its maximum PV input voltage is 250 VDC, with a maximum start-up and operating voltage of 245 V. Conversion efficiency exceeds 99%, without the need for a cooling fan, ensuring increased reliability and standby consumption below 35 mA at 12V and 20 mA at 48V.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Battery Management and Protection\u003c\/h3\u003e\n\u003cp\u003e\n    This controller integrates a fully programmable multi-stage adaptive charging algorithm, complemented by eight pre-programmed algorithms selectable via a rotary switch. Default charging voltages include 14.4 V (absorption) and 13.8 V (float) for 12V systems, adjustable for other voltages. It includes a recovery function for fully discharged batteries, including Li-ion batteries with built-in disconnect function. In terms of protection, the SmartSolar MPPT 250\/70-Tr offers protection against PV and battery polarity reversal, PV and output short circuits, as well as overheating protection with power derating.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The controller is equipped with built-in Bluetooth Smart, enabling wireless configuration, monitoring, and updates via the VictronConnect app. It also features VE.Direct and VE.Can ports for wired connections to GX devices such as the Color Control GX, facilitating remote monitoring via the VRM portal. Up to 25 units can be synchronized in parallel via VE.Can, and up to 10 units via Bluetooth, offering flexibility for large installations. An optional plug-in LCD display is available for direct control. The programmable relay can trigger alarms or other events.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the Victron SmartSolar MPPT Range\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar MPPT 250\/70-Tr is positioned as a versatile model within Victron Energy's 250V series. Compared to its counterparts such as the SmartSolar MPPT 250\/85 and 250\/100 VE.Can, it offers a 70 A charging capacity, making it suitable for medium to large systems that benefit from a high PV input voltage (up to 250 V) to optimize cable lengths and reduce losses, but do not require the higher output currents of 85 A or 100 A. This 250V input specification is a significant advantage over lower-range models (e.g., 100V or 150V), allowing for more flexible panel configurations and larger-scale installations. Its 5-year warranty underscores Victron Energy's commitment to equipment durability.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786887577940,"sku":"SCC125070221","price":364.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-250-70-Tr-VE-Can-front.jpg?v=1778605279"},{"product_id":"victron-energy-smartsolar-mppt-150-45-controleur-charge-solaire","title":"SmartSolar MPPT 150\/45","description":"\u003cp\u003e\n    Designed for efficient solar power management in marine environments, the Victron Energy SmartSolar MPPT 150\/45 charge controller optimizes energy harvesting from solar panels for battery charging. This model sits as an intermediate solution in the SmartSolar range, offering a balance between power and flexibility for 12V, 24V, 36V (software-configurable) or 48V systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced MPPT technology for maximum energy harvesting\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar MPPT 150\/45 integrates ultra-fast maximum power point tracking (MPPT) technology. This capability is critical for maximizing energy input, particularly under cloudy skies where light intensity varies constantly. It improves energy harvesting by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers. In cases of partial shading, the innovative BlueSolar algorithm detects the global maximum power point, ensuring continuous optimization.\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem connectivity and flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    With a maximum PV open-circuit voltage of 150 V and a nominal charge current of 45 A, this controller supports nominal PV power ratings up to 650 W at 12 V and 2600 W at 48 V. Its conversion efficiency exceeds 98%. The SmartSolar MPPT 150\/45 features integrated Bluetooth Smart for configuration and monitoring via the VictronConnect app, as well as a VE.Direct port for wired connection to other GX devices or a PC. It includes extensive electronic protection against overheating, PV short circuits, PV polarity reversal, and PV reverse current. An internal temperature sensor automatically compensates absorption and float charge voltages. The controller can initiate charging even if the battery has been discharged to zero volts and can reconnect to a fully discharged Li-ion battery with integrated disconnect function.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786899571028,"sku":"SCC115045212","price":166.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-45-front.jpg?v=1778605401"},{"product_id":"victron-smartsolar-mppt-150-70-ve-can-regulateur-charge","title":"SmartSolar MPPT VE.Can 150\/70 Tr RS","description":"\u003cp\u003e\n    The Victron Energy SmartSolar MPPT 150\/70 VE.Can solar charge controller is designed to optimize energy harvesting in marine photovoltaic systems. It features an ultra-fast maximum power point tracking (MPPT) algorithm, improving energy production by up to 30% compared to PWM controllers and 10% compared to slower MPPT controllers, particularly under cloudy skies or partial shading conditions thanks to its advanced power point detection. With a maximum conversion efficiency exceeding 98%, this controller operates without a cooling fan.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with \u003cstrong\u003eVE.Can\u003c\/strong\u003e and \u003cstrong\u003eBluetooth Smart\u003c\/strong\u003e interfaces, the SmartSolar MPPT 150\/70 VE.Can enables flexible management of the installation. The VE.Can protocol supports synchronization of up to 25 units for large-scale systems, and a wired connection to GX devices such as the Color Control GX for centralized monitoring and control. The Bluetooth Smart connectivity provides a wireless solution for configuration, monitoring, updates, and synchronization of up to 10 controllers, including via the VictronConnect app. The controller can also integrate external battery voltage and temperature data via Bluetooth, from a Smart Battery Sense, BMV-712 Smart, or SmartShunt.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and Protections\u003c\/h3\u003e\n\u003cp\u003e\n    This model features a fully programmable charging algorithm with eight presets selectable via a rotary switch, as well as a fully discharged battery recovery function. It includes extensive electronic protections against overheating (with power reduction), PV short circuits, PV polarity reversal, and PV reverse current. A programmable relay and remote on\/off function are also available, enabling deep integration into complex systems such as those managed by a VE.BUS BMS. The \u003cstrong\u003eSmartSolar MPPT 150\/70 VE.Can\u003c\/strong\u003e is part of the SmartSolar range alongside the 150\/85 and 150\/100 VE.Can models, offering a nominal charge current of 70A for auto-selectable 12\/24\/48V battery voltage and a nominal PV power of up to 4000W at 48V, making it suitable for medium to large solar installations. Its PV terminals are compatible with cables up to 35 mm² \/ AWG2 (Tr models) and support a maximum PV voltage of 150V.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786971529556,"sku":"SCC125085511","price":445.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-85-MC4-VE-Can-front-angle_7499d197-4aab-462b-a2c0-64d260a04f35.jpg?v=1778606108"},{"product_id":"victron-energy-ve-can-interface-communication-marine","title":"SmartSolar MPPT VE.Can 250\/100 Tr RS","description":"\u003cp\u003e\n    The Victron Energy VE.Can communication interface is designed for the integration and advanced management of marine energy systems. It enables the connection and synchronization of multiple devices within a unified network, facilitating supervision and performance optimization.\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem integration and synchronization\u003c\/h3\u003e\n\u003cp\u003e\n    The VE.Can protocol allows up to 25 units to be connected, such as SmartSolar MPPT solar charge controllers, for precise synchronization. This networking capability ensures coordinated battery charging management, which is particularly advantageous for large-scale solar installations where multiple controllers operate in parallel. Unlike solutions limited to a few devices via Bluetooth (up to 10 units for SmartSolar models), VE.Can offers superior scalability for complex systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced connectivity and monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    With VE.Can ports, devices can be connected to a Color Control GX or other GX products, as well as to a PC, for wired data transmission. This wired connectivity ensures higher reliability compared to wireless links in potentially disrupted environments. Remote monitoring is possible via the Victron Remote Management (VRM) portal when the system is connected to a GX device with internet access, providing full access to real-time and historical solar controller data. Information such as PV voltage and current, battery voltage, current, and temperature is stored for 46 days, enabling in-depth system performance analysis.\n\u003c\/p\u003e\n\n\u003ch3\u003eSmartSolar MPPT charge controller features compatible with VE.Can\u003c\/h3\u003e\n\u003cp\u003e\n    SmartSolar MPPT solar charge controllers featuring the VE.Can interface utilize ultra-fast MPPT technology that maximizes energy harvesting, even in cloudy conditions or partial shading. They achieve conversion efficiencies exceeding 98% without cooling fans. These controllers are compatible with 12V, 24V, 36V, and 48V battery systems (automatic or manual 36V selection) and can handle PV open-circuit voltages up to 150V. They include extensive electronic protection against overheating, PV short circuits, PV reverse polarity, and PV reverse current, as well as a fully programmable flexible charging algorithm with eight presets. The fully discharged battery recovery function can initiate charging even if the battery has reached zero volts or reconnect a discharged Li-ion battery with built-in disconnect function. A programmable relay and remote on\/off function complete the capabilities of these controllers.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787000987988,"sku":"SCC125110512","price":497.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-85-MC4-VE-Can-front-angle_584b354a-382a-4670-b464-8b284c3aea66.jpg?v=1778606705"},{"product_id":"victron-energy-ve-can-interface-chargeur-solaire-mppt","title":"SmartSolar MPPT VE.Can 150\/100","description":"\u003cp\u003e\n    Victron Energy’s VE.Can communication system is a cornerstone for integrating and managing advanced marine energy installations. Primarily integrated with SmartSolar MPPT charge controllers, such as the 150\/70, 150\/85, and 150\/100 models, it enables a robust and synchronized multi-controller architecture.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced Performance and Synchronization\u003c\/h3\u003e\n\u003cp\u003e\n    The VE.Can technology allows synchronization of up to 25 SmartSolar MPPT charge controllers. This feature is critical for large-scale solar systems, ensuring coordinated charge management and overall energy optimization. Unlike Bluetooth, which is limited to 10 units, VE.Can significantly expands expansion possibilities, enabling maximum solar energy harvesting, especially in cloudy conditions or partial shading where light intensity varies constantly. The ultra-fast MPPT algorithms and advanced maximum power point detection ensure conversion efficiency exceeding 98%.\n\u003c\/p\u003e\n\u003ch3\u003eSystem Integration and Flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    In addition to synchronization, the VE.Can interface facilitates wired connection to other Victron Energy GX devices, such as the Color Control GX, for centralized monitoring and in-depth control. This connectivity complements the VE.Direct interface and integrated Bluetooth Smart, offering versatile communication options. VE.Can-compatible controllers feature a fully programmable charging algorithm with eight selectable presets via a rotary switch. They also include extended electronic protections against overheating, PV short circuits, and polarity reversal, ensuring the longevity and safety of the installation. Features such as fully discharged battery recovery and a programmable relay complete the offering of these systems.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787021336916,"sku":"SCC115085411","price":363.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-85-MC4-VE-Can-front-angle_0877fedd-14ca-4c58-b7b7-37f1362e706e.jpg?v=1778607092"},{"product_id":"victron-energy-ve-can-smartsolar-mppt-chargeur-solaire","title":"SmartSolar MPPT VE.Can 150\/85","description":"\u003cp\u003e\n    The Victron Energy VE.Can solar charge controller is part of the SmartSolar MPPT range, known for optimizing photovoltaic energy harvesting. It features an ultra-fast MPPT (Maximum Power Point Tracking) algorithm capable of improving energy production by up to 30% compared to PWM controllers and up to 10% compared to slower MPPT controllers, particularly under cloudy skies where light intensity varies continuously.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and energy management\u003c\/h3\u003e\n\u003cp\u003e\n    This controller integrates advanced maximum power point detection, even under partial shading conditions, ensuring the system always locks onto the optimal MPP. With a maximum conversion efficiency exceeding 98% and no cooling fan, it operates silently and efficiently. It supports battery voltages of 12 V, 24 V, and 48 V with automatic detection (36 V can be manually configured), and the SCC115085511 model offers a nominal charge capacity of 85 A. It is part of the SmartSolar MPPT 150\/70 to 150\/100 VE.Can series, which provides charge currents from 70 A to 100 A. The supported nominal PV power ranges from 1000 W to 5800 W depending on system voltage. Compared to SmartSolar MPPT models without VE.Can interface, this series allows for more extensive networking and advanced synchronization.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Victron Energy VE.Can solar charge controller is equipped with built-in Bluetooth Smart for configuration, monitoring, and updates via the VictronConnect app. It also features VE.Direct and VE.Can ports for wired connection to GX devices such as the Color Control GX or other Victron Energy products. The VE.Can function enables synchronization of up to 25 units in parallel for large-scale solar installations, offering a far more scalable solution than systems limited to a few units via Bluetooth (max. 10 units). It includes comprehensive electronic protections, such as protection against overheating, PV short circuits, and PV polarity reversal. A programmable relay and a fully discharged battery recovery function, including Li-ion batteries with integrated disconnection, complete its features. An optional plug-in LCD screen is available for direct local monitoring on the device.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787047878996,"sku":"SCC115085511","price":352.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-85-MC4-VE-Can-front-angle_7a2eca70-7c4e-4f18-9499-bbc23d662408.jpg?v=1778607547"},{"product_id":"victron-energy-smartsolar-mppt-250-60-mc4-controleur-charge-solaire","title":"SmartSolar MPPT 250\/60-MC4","description":"\u003cp\u003e\n    Designed to maximize solar energy harvesting, the \u003cstrong\u003eSmartSolar MPPT 250\/60-MC4\u003c\/strong\u003e charge controller from Victron Energy features ultra-fast MPPT technology. It automatically manages battery voltages of 12 V, 24 V, and 48 V, with a 36 V option via software tool, and delivers a nominal charging current of 60 A. This model stands out for its ability to optimize production even under cloudy skies, outperforming PWM controllers by 30 % and slower MPPT controllers by 10 %.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced optimization and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSmartSolar MPPT 250\/60-MC4\u003c\/strong\u003e can identify the optimal maximum power point (MPP) even with partial shading, avoiding lock-in on local MPPs. Its conversion efficiency exceeds 99 %, without requiring a cooling fan. Equipped with built-in Bluetooth Smart, it enables wireless configuration, monitoring, and updates via the VictronConnect app, as well as synchronization of up to 10 units for larger systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eBuilt-in features and protections\u003c\/h3\u003e\n\u003cp\u003e\n    This charge controller offers a flexible charging algorithm, fully programmable or selectable from eight presets via a rotary switch. It includes comprehensive electronic protections against overheating, PV short circuits, PV polarity reversal, and PV reverse current. A recovery function allows recharging of fully discharged batteries, including Li-ion batteries with built-in disconnection function. Connectivity is provided by a VE.Direct port for integration with GX devices, a programmable relay, and a remote on\/off function. Compared to the 250\/70 model in the same range, the 250\/60 offers a nominal current capacity of 60 A versus 70 A, while retaining the same advanced tracking and management features.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787058299220,"sku":"SCC125060321","price":322.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-250-60-MC4-PT01.jpg?v=1778607659"},{"product_id":"victron-energy-ve-can-regulateur-charge-solaire","title":"SmartSolar MPPT VE.Can 250\/70 MC4 RS","description":"\u003cp\u003e\n    The VE.Can term from Victron Energy refers to the advanced communication interface used within its systems, particularly on the SmartSolar MPPT VE.Can solar charge controller range. This interface is designed to optimize energy management by enabling the interconnection and synchronization of multiple devices. SmartSolar MPPT VE.Can charge controllers, such as the 150\/70 to 250\/100 models, integrate this technology for maximized solar energy harvesting and sophisticated battery management.\n\u003c\/p\u003e\n\n\u003ch3\u003eMPPT Technology and Efficiency\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar MPPT VE.Can series stands out for its ultra-fast maximum power point tracking (MPPT) technology. This feature is critical, especially under cloudy skies, where light intensity fluctuates constantly, improving energy harvesting by up to 30% compared to PWM controllers and 10% compared to slower MPPT controllers. In partial shading conditions, the SmartSolar’s innovative algorithm always identifies the global maximum power point, avoiding being stuck on a suboptimal local MPP. These controllers achieve over 98% conversion efficiency without cooling fans, ensuring optimized thermal dissipation.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The VE.Can interface allows up to 25 SmartSolar VE.Can charge controllers to be synchronized in series, providing a scalable solution for large-scale solar installations. This connectivity facilitates integration with a GX device (such as a Color Control GX) for centralized monitoring and remote management via the Victron Remote Management (VRM) portal. Additionally, integrated Bluetooth Smart technology enables configuration, monitoring, and firmware updates for controllers via the VictronConnect app, even for synchronization of up to 10 units. VE.Direct and VE.Can ports offer wired connection options for PCs or other devices. The product can also interface with third-party CAN-bus compatible batteries using specific VE.Can to CAN-bus BMS cables (types A or B), allowing the Victron system to monitor and manage these batteries.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Features and Protection\u003c\/h3\u003e\n\u003cp\u003e\n    SmartSolar MPPT VE.Can controllers support automatic battery voltage detection (12\/24\/48 V, with 36 V configurable manually) and can recharge fully discharged batteries (down to zero volts for undamaged batteries). They offer a flexible, fully programmable charging algorithm with eight preset profiles selectable via a rotary switch, including temperature compensation of -16 mV \/ -32 mV \/ -64 mV \/ °C. Electronic protection is extensive, covering PV polarity reversals, output short circuits, and overheating. A programmable relay allows triggering alarms or other events, and a remote on\/off function is available for integration with systems like the VE.BUS BMS. PV terminals (35 mm² \/ AWG2 for Tr models, or two to three pairs of MC4 connectors for MC4 models) and battery terminals (35 mm² \/ AWG2) ensure robust connections. The protection category is IP43 for electronic components and IP22 for the connection area.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787073372500,"sku":"SCC125070441","price":411.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-85-MC4-VE-Can-front-angle_597966e0-dcb4-4a17-b78e-51770ac92a46.jpg?v=1778607868"},{"product_id":"victron-energy-smartsolar-mppt-150-70-ve-can-regulateur-solaire","title":"SmartSolar MPPT VE.Can 150\/70 Tr RS","description":"\u003cp\u003e\n    The Victron Energy SmartSolar MPPT 150\/70 VE.Can charge controller (part number SCC115110511) is designed to optimize energy harvesting for marine and land-based photovoltaic installations. This controller integrates an ultra-fast maximum power point tracking (MPPT) algorithm, capable of improving energy production by up to 30% compared to PWM controllers, and 10% compared to slower MPPT units, particularly under cloudy conditions where light intensity fluctuates constantly. Its ability to detect the optimal maximum power point even under partial shading ensures consistent energy efficiency.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Efficiency of the SmartSolar MPPT 150\/70 VE.Can\u003c\/h3\u003e\n\u003cp\u003e\n    With a maximum conversion efficiency exceeding 98% and no cooling fan, the MPPT 150\/70 VE.Can maintains stable performance. It is compatible with battery voltages of 12 V, 24 V, 36 V, and 48 V (auto-select, 36 V manual). Its nominal PV power reaches 1000 W at 12 V, 2000 W at 24 V, 3000 W at 36 V, and 4000 W at 48 V. The maximum PV open-circuit voltage is 150 V, with a maximum start-up and operating voltage of 145 V. The controller includes extensive electronic protection against overheating, PV short-circuit, PV reverse polarity, and PV reverse current, ensuring installation safety.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartSolar MPPT 150\/70 VE.Can stands out for its comprehensive communication options. It features built-in Bluetooth Smart for configuration, monitoring, and updates via the VictronConnect app. The VE.Direct interface enables wired connection to a Color Control GX or other GX products, while the VE.Can port provides a solution for multi-controller systems, allowing synchronization of up to 25 units in a daisy-chain and individual monitoring via a GX device or the VRM portal. This advanced networking capability positions the 150\/70 VE.Can as a flexible solution for complex energy systems, distinguishing it from SmartSolar models without a VE.Can interface, which do not offer this synchronized multi-controller scalability. It also supports recovery of fully discharged batteries, including Li-ion batteries with built-in disconnect function. A programmable relay and remote on\/off function complete its system integration capabilities.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787081171284,"sku":"SCC115110511","price":400.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-85-MC4-VE-Can-front-angle_4f3a6ebf-3e16-4a13-b652-ae3b399a3934.jpg?v=1778608106"},{"product_id":"victron-energy-smartsolar-mppt-150-70-tr-controleur-charge-solaire","title":"SmartSolar MPPT 150\/70-Tr","description":"\u003cp\u003e\n    The Victron Energy SmartSolar MPPT 150\/70-Tr charge controller is designed to optimize energy harvesting from photovoltaic panels and manage battery charging in marine and standalone systems. This model, part of the SmartSolar MPPT 150\/X0 VE.Can series, delivers a nominal charging current of 70 A and is compatible with battery voltages of 12 V, 24 V, 36 V (manual setting), and 48 V. It can handle up to 1000 W at 12 V, 2000 W at 24 V, 3000 W at 36 V, and 4000 W at 48 V, with a maximum open-circuit voltage of 150 V for the PV array.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced MPPT technology for maximum efficiency\u003c\/h3\u003e\n\u003cp\u003e\n    Thanks to its ultra-fast maximum power point tracking (MPPT) technology, the SmartSolar MPPT 150\/70-Tr improves energy recovery by up to 30% compared to PWM controllers and 10% compared to slower MPPT controllers, particularly under cloudy conditions or with fluctuating light intensity. Its innovative algorithm ensures advanced maximum power point detection even in partial shading scenarios, locking onto the optimal MPP to maximize output. It achieves a conversion efficiency exceeding 98% without requiring a cooling fan and maintains full power up to 40 °C, with an operating range of -30 to +60 °C.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and flexibility for system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The controller integrates Bluetooth Smart for wireless configuration, monitoring, and updates via the VictronConnect app. For centralized management, it can be synchronized with up to 25 units via its VE.Can interface, or 10 units via Bluetooth, and connect to a Color Control GX or other GX devices via VE.Direct. The SmartSolar MPPT 150\/70-Tr supports a fully programmable charging algorithm with eight presets, a fully discharged battery recovery function, and extensive electronic protection against PV reverse polarity, output short circuits, and overheating. A programmable relay and a remote on\/off input complete its features, providing flexibility for various configurations. Compared to the SmartSolar MPPT 150\/100 VE.Can, the 150\/70-Tr model is suited for systems requiring a 70 A charging current while retaining the same PV voltage and advanced connectivity capabilities, positioning it for mid-power installations within the SmartSolar MPPT 150V range.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787089166676,"sku":"SCC115070211","price":291.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-70-Tr-VE-Can-front-conn.jpg?v=1778608268"},{"product_id":"victron-energy-ve-can-protocole-communication-marine","title":"SmartSolar MPPT VE.Can 250\/100 MC4 RS","description":"\u003cp\u003e\n    Victron Energy’s \u003cstrong\u003eVE.Can protocol\u003c\/strong\u003e is an advanced solution for integrating and managing marine energy systems, particularly through SmartSolar MPPT charge controllers. Designed for installations requiring robust communication and multi-device synchronization, it optimizes energy harvesting and network stability.\n\u003c\/p\u003e\n\n\u003ch3\u003eKey features of the VE.Can protocol\u003c\/h3\u003e\n\u003cp\u003e\n    The VE.Can protocol enables extended network synchronization and monitoring. Up to 25 SmartSolar charge controllers can be interconnected via VE.Can, ensuring coordinated battery charging. Unlike older CAN-bus models, VE.Can allows individual monitoring of each controller via a GX device (such as a Color Control GX or Cerbo GX) and the VRM portal, providing detailed performance data for each PV string. This capability is critical for diagnosing and optimizing large solar installations.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and performance of SmartSolar MPPT VE.Can controllers\u003c\/h3\u003e\n\u003cp\u003e\n    SmartSolar MPPT solar charge controllers integrating VE.Can feature ultra-fast Maximum Power Point Tracking (MPPT) technology, improving energy harvesting by up to 30% compared to PWM controllers and 10% compared to slower MPPT controllers, particularly under cloudy or partially shaded conditions. They detect optimal maximum power points even in partial shading, maximizing efficiency. These controllers achieve conversion efficiencies exceeding 98% without requiring cooling fans. They support battery voltages of 12V, 24V, 36V, and 48V (auto-detection except for 36V) and can handle nominal charging currents from 70A to 100A, with nominal PV power ratings up to 5800W for 48V systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    In addition to VE.Can, these devices include VE.Direct and Bluetooth Smart communication, facilitating configuration, monitoring, and updates via the VictronConnect app. Support for Energy Storage Systems (ESS) and control via smart batteries (CAN-bus) are key features absent in previous generations. They feature extensive electronic protection, including against PV short circuits and reverse polarity, as well as overheat protection. A programmable relay and remote on\/off function are also included. The enclosure is blue (RAL 5012) with IP43 protection for electronic components and IP22 for the connection area.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787151819092,"sku":"SCC125110441","price":488.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-85-MC4-VE-Can-front-angle_1f8dc43b-176d-4ff2-b3ce-255f299539da.jpg?v=1778608641"},{"product_id":"victron-energy-smartsolar-mppt-150-60-mc4-regulateur-solaire","title":"SmartSolar MPPT 150\/60-MC4","description":"\u003cp\u003e\n    Designed to optimize solar energy harvesting, the \u003cstrong\u003eSmartSolar MPPT 150\/60-MC4\u003c\/strong\u003e solar charge controller from Victron Energy is a solution for marine and land-based photovoltaic systems. This model, part of the SmartSolar MPPT 150V range, delivers a nominal charge current capacity of 60A and supports battery voltages of 12V, 24V, 36V, and 48V, with automatic detection and software configuration for 36V. Its conversion efficiency exceeds 98%, ensuring maximum utilization of solar panel energy.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced MPPT technology for enhanced performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSmartSolar MPPT 150\/60-MC4\u003c\/strong\u003e integrates an ultra-fast maximum power point tracking (MPPT) algorithm. This technology improves energy harvesting by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers, particularly under cloudy skies or during continuous light intensity variations. In cases of partial shading, its innovative algorithm always identifies the global maximum power point (MPP) to optimize production, unlike conventional MPPTs that may get stuck on a local MPP.\n\u003c\/p\u003e\n\n\u003ch3\u003eFlexible connectivity and management\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with integrated Bluetooth Smart technology, this controller enables wireless configuration, control, and updates via the VictronConnect app from a smartphone or tablet. For wired integration, the VE.Direct port ensures communication with a Color Control GX, other GX products, or a PC. The synchronized parallel charging function via Bluetooth allows up to 10 units to be connected for larger-scale installations. The \u003cstrong\u003eSmartSolar MPPT 150\/60-MC4\u003c\/strong\u003e also includes comprehensive electronic protection against overheating, PV short circuits, PV polarity reversal, and PV reverse current. It manages the recovery of deeply discharged batteries, even at 0V, and can reconnect a discharged Li-ion battery with integrated disconnect function.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787204477268,"sku":"SCC115060311","price":289.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-60-MC4-PT01.jpg?v=1778609022"},{"product_id":"victron-energy-smartsolar-mppt-75-10-regulateur-charge-solaire","title":"SmartSolar MPPT 75\/10","description":"\u003cp\u003e\n    The Victron Energy SmartSolar MPPT 75\/10 solar charge controller is designed to optimize energy harvesting from photovoltaic panels to batteries in standalone systems. It features ultra-fast MPPT technology, improving energy harvesting by up to 30% compared to PWM controllers and 10% over slower MPPT controllers. This model is suitable for 12V and 24V battery systems, with a nominal charge current of 10 amperes and a maximum PV open-circuit voltage of 75 volts. Its nominal PV power reaches 145W at 12V and 290W at 24V, with a peak efficiency of 98%.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated Features and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Compared to Victron Energy’s BlueSolar range, the SmartSolar MPPT 75\/10 stands out with its integrated Bluetooth Smart module. This feature enables wireless configuration, monitoring, and updates via the VictronConnect app, simplifying system management. The VE.Direct port provides wired connectivity for integration with other Victron products, such as GX devices (Color Control GX, Cerbo GX) or the VRM portal for remote monitoring. The device also includes a smart load output with a 15A capacity and a BatteryLife algorithm to extend battery lifespan by adjusting disconnection levels.\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem Protection and Adaptability\u003c\/h3\u003e\n\u003cp\u003e\n    This charge controller offers extensive electronic protection, including temperature compensation via an internal sensor, protection against overheating, PV short circuits, and polarity reversal. Its 3-stage adaptive charging algorithm is programmable to suit various battery types, including the ability to recharge deeply discharged batteries (down to 0 volts if undamaged). With compact dimensions of 100 x 113 x 40 mm and a weight of 0.5 kg, along with IP43 protection, it is designed for space-limited installations, such as small recreational vehicles or boats, while ensuring reliable performance and a 5-year warranty. Higher-power SmartSolar models, such as the 150\/60 or 250\/100, offer additional features like the VE.Can port, remote on\/off input, and a programmable relay, suitable for more complex systems.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787233411412,"sku":"SCC075010060R","price":44.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-75-10-front.jpg?v=1778609286"},{"product_id":"victron-energy-ve-can-protocole-communication","title":"SmartSolar MPPT VE.Can 150\/70 Tr RS","description":"\u003cp\u003e\n    The Victron Energy VE.Can is a robust communication protocol based on the CAN bus standard, essential for data exchange and advanced control within Victron energy systems. Designed for complex installations, it enables reliable and fast interconnection between various compatible devices, offering centralized management and optimized performance of the entire system. Its ability to manage multi-controller architectures distinguishes it from VE.Direct solutions, which are better suited to single-device or smaller-scale configurations.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced integration and synchronization\u003c\/h3\u003e\n\u003cp\u003e\n    The VE.Can protocol facilitates the synchronization of charging stages (bulk, absorption, float) for up to 25 compatible charge controllers, such as the SmartSolar MPPT 150\/70 to 150\/100 VE.Can ranges. This feature ensures efficient coordination of battery recharging, preventing imbalances and maximizing solar energy production. For physical connectivity, VE.Can uses standard RJ45 cables for daisy-chaining, simplifying wiring and system expansion. VE.Can ports support data rates of 250 kb\/s, ensuring smooth and responsive communication. Some specific CAN-bus systems, such as BMS-CAN, may operate at 500 kb\/s.\n\u003c\/p\u003e\n\n\u003ch3\u003eExtended monitoring and control\u003c\/h3\u003e\n\u003cp\u003e\n    Thanks to VE.Can integration, each compatible controller can be individually monitored via a Victron GX device (such as the Color Control GX) and the VRM portal (Victron Remote Management). The protocol also allows seamless integration of VE.Direct devices via a dedicated interface, consolidating data from the entire system. Compatibility with smart batteries (CAN-bus) and ESS (Energy Storage Systems) extends control and management capabilities. The VE.Can protocol is designed for increased robustness against electronic interference, enhancing system reliability in marine environments.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787252416852,"sku":"SCC115070511","price":321.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-85-MC4-VE-Can-front-angle_d4db776a-7ce1-447c-8c9f-670d9712473c.jpg?v=1778609513"},{"product_id":"victron-energy-bluesolar-mppt-150-45-controleur-charge-solaire","title":"BlueSolar MPPT 150\/45","description":"\u003cp\u003e\n    Designed to optimize solar energy harvesting, the \u003cstrong\u003eBlueSolar MPPT 150\/45\u003c\/strong\u003e charge controller from VICTRON ENERGY is an MPPT regulator that efficiently manages battery charging from photovoltaic panels. This model ensures energy conversion with a maximum efficiency of over 98%, without requiring a cooling fan, and maintains its full output power up to 40 °C.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced MPPT Technology for Maximum Harvesting\u003c\/h3\u003e\n\u003cp\u003e\n    The BlueSolar MPPT 150\/45 features ultra-fast maximum power point tracking (MPPT) technology. This function is particularly advantageous under cloudy skies or when light intensity varies rapidly, improving energy harvesting by up to 30% compared to PWM controllers and up to 10% compared to slower MPPT controllers. Its innovative maximum power point detection algorithm manages partial shading conditions by identifying the optimal MPP, thus avoiding getting stuck on a less efficient local power point. It supports a maximum PV open-circuit voltage of 150 V and a maximum PV short-circuit current of 50 A.\n\u003c\/p\u003e\n\u003ch3\u003eFlexibility and System Protection\u003c\/h3\u003e\n\u003cp\u003e\n    This controller is compatible with 12 V, 24 V, and 48 V battery systems (with 36 V option via software) and provides a nominal charging current of 45 A. The supported nominal PV power is 650 W for a 12 V system, 1300 W for 24 V, 1950 W for 36 V, and 2600 W for 48 V. The BlueSolar MPPT 150\/45 has a fully programmable charging algorithm, complemented by eight pre-programmed algorithms selectable via a rotary switch, suitable for various battery types (AGM, Gel, Lithium). It includes electronic protections against overheating (with power derating), short circuits, and PV polarity reversal, as well as PV reverse currents. An internal temperature sensor ensures compensation of absorption and float charge voltages.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    The controller integrates Bluetooth Smart, enabling configuration, monitoring, and updates via the VictronConnect app. The VE.Direct port provides a wired connection to devices such as the Color Control GX or other GX products, as well as to a PC. External voltage and battery temperature sensing options via Bluetooth are available with the Smart Battery Sense or a BMV-712 Smart battery monitor. It supports recovery of fully discharged batteries, including Li-ion batteries with integrated disconnect function. Its own consumption is 20 mA at 12 V, 15 mA at 24 V, and 10 mA at 48 V. The enclosure is rated IP43 for electronic components and IP22 for the connection area, ensuring robustness for marine and off-grid environments.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55787253793108,"sku":"SCC115045222","price":162.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-SmartSolar-MPPT-150-45-front_ea064ec7-c43f-4da6-bf2d-9f205a7fea64.jpg?v=1778609627"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/d9ac487a26ac66e0505ddb0e30deb58f.png?v=1779975991","url":"https:\/\/skysat.fr\/en-gb\/collections\/onboard-power-production.oembed?page=2","provider":"Skysat","version":"1.0","type":"link"}