{"title":"Veratron","description":"\u003cp\u003eVeratron consolidates marine instrumentation solutions to modernize or supplement an engine dashboard: VMH and VL Flex displays, LinkUp modules for NMEA 2000, data gateways, fuel gauges, and EasyLink accessories.\u003c\/p\u003e\n\u003cp\u003eThis selection is intended for analog engine installations that need to retain existing sensors while transmitting essential data to a modern network: RPM, temperature, pressure, fuel level, and alarms based on the chosen architecture.\u003c\/p\u003e","products":[{"product_id":"veratron-oceanlink-7-tft-ecran-moteur-multifonction","title":"OceanLink 7\" TFT - multifunction engine display","description":"\u003cp\u003eThe \u003cstrong\u003eVeratron OceanLink 7\" TFT\u003c\/strong\u003e is a multifunction engine display designed to consolidate engine monitoring and navigation data in one place. It can display information received from various sources and manage up to ten configurable data pages.\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated engine gateway\u003c\/h3\u003e\n\u003cp\u003eThe Veratron datasheet states that the OceanLink Master 7\" can monitor up to four engines. Its integrated gateway acquires engine data via analog signals or SAE J1939, then converts and distributes it over the NMEA 2000 network. Reported inputs include six resistive sensors, three voltage sensors, two capacitive sensors, and one digital alarm.\u003c\/p\u003e\n\n\u003ch3\u003eOceanLink ecosystem\u003c\/h3\u003e\n\u003cp\u003eThe product can also distribute data over two EasyLink channels, each capable of powering OceanLink 52 mm displays. It can display data from the NMEA 2000 network, such as wind, compass, GPS, speed, or depth.\u003c\/p\u003e\n\n\u003ch3\u003eCatalogue positioning\u003c\/h3\u003e\n\u003cp\u003eThis is a suitable solution when modernizing analog engine instrumentation without adding separate gateways. The point to verify before publication is the Skysat supplier price and availability, as no local price list was found in Nexus.","brand":"Veratron","offers":[{"title":"Default Title","offer_id":56384595165524,"sku":"A2C1865330001","price":1266.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15589623234900-1000.jpg?v=1783606568"},{"product_id":"veratron-vmh-70-7-pouces-ecran-moteur-tactile","title":"VMH 70 7\" - Touchscreen multifunction engine display","description":"\u003cp\u003eThe \u003cstrong\u003eVeratron VMH 70\u003c\/strong\u003e is the 7-inch display from the premium VMH series. It targets installations where you want to consolidate a large volume of engine and boat data into a customizable touch interface, with fast startup and readability suited for outdoor environments.\u003c\/p\u003e\n\n\u003ch3\u003e7-inch touchscreen and embedded bridge\u003c\/h3\u003e\n\u003cp\u003eVeratron announces a 7\" IPS TFT display readable in sunlight, a mineral glass front, an aluminum\/PBT housing, and IPX7 protection when cables are connected. The integrated NMEA 2000 bridge allows reading analog sensor data and alarms without necessarily adding a separate converter.\u003c\/p\u003e\n\n\u003ch3\u003eEngine data, analog inputs, and J1939\u003c\/h3\u003e\n\u003cp\u003eThe VMH 70 can be configured to display up to four engines via NMEA 2000, or two engines via J1939 or analog inputs. Inputs include six resistive, two frequency, three voltage, two capacitive, and one alarm input. Outputs cover NMEA 2000, EasyLink, and alarm output.\u003c\/p\u003e\n\n\u003ch3\u003eModern Solution A vs. a separate bridge\u003c\/h3\u003e\n\u003cp\u003eFor an engine refit, the VMH 70 can be a consistent alternative to a separate analog bridge when the customer also wants to replace the display. However, before publication, the Skysat supplier price, target margin, and final catalog collection must be confirmed.","brand":"Veratron","offers":[{"title":"Default Title","offer_id":56384821035348,"sku":"B00129201","price":909.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15589687558484-1000.jpg?v=1784561030"},{"product_id":"veratron-linkup-gateway-resistif-nmea-2000","title":"LinkUp Gateway resistive to NMEA 2000","description":"\u003cp\u003eDesigned for marine environments, the \u003cstrong\u003eVeratron LinkUp resistive gateway\u003c\/strong\u003e (reference B00042201) is an interface that converts resistive sensor signals into NMEA 2000® data. This device allows essential information such as fluid levels, temperatures, or pressures to be integrated directly into an NMEA 2000 network, making it easy to display on compatible screens.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and configuration\u003c\/h3\u003e\n\u003cp\u003eThe gateway is configurable via the AirWave-based Airlink interface or via NMEA 2000 using the Veratron configuration tool. Its design enables contactless configuration using a smartphone, eliminating the need for additional hardware. The LinkUp gateway is powered directly by the NMEA 2000 network, reducing the necessary wiring.\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and technical specifications\u003c\/h3\u003e\n\u003cp\u003eApproved for installation in engine compartments according to ISO 8846:1990, the Veratron LinkUp resistive gateway ensures reliability in these environments. Sensor-side connection is made via a 2-pin AMP SuperSeal connector, compatible with Veratron level sensors for a plug-and-play installation. Its specifications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 6 – 16.5 V\u003c\/li\u003e\n\u003cli\u003eProtection class: IP X9\/K\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 12 V \/ 24 V\u003c\/li\u003e\n\u003cli\u003ePower consumption: ≤ 15 mA (normal mode), ≤ 120 μA (sleep mode)\u003c\/li\u003e\n\u003cli\u003eOutput signal: NMEA 2000®\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 °C to 80 °C\u003c\/li\u003e\n\u003cli\u003eFlammability: compliant with UL94\u003c\/li\u003e\n\u003cli\u003eCompliance: CE, Reach, RoHS\u003c\/li\u003e\n\u003cli\u003eHousing material: PC-FR\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility and applications\u003c\/h3\u003e\n\u003cp\u003eThe gateway supports various NMEA 2000 PGNs, including 127245 (rudder), 127505 (fluid level), 127488 and 127489 (engine parameters), as well as 130576 (flap status). It is compatible with configurations for fuel levels, fresh and waste water, coolant and oil temperatures, oil and boost pressures, rudder angles, and trim positions.\u003c\/p\u003e\n\u003cp\u003eThis gateway complements VMH\/OceanLink systems when specific measurements need to be relayed or when built-in inputs are already in use. It is suitable for resistive level, temperature, or pressure sensors depending on the required configuration. It is designed for isolated resistive sensors to be integrated into an NMEA 2000 network and should not be considered a complete housing for a twin-engine architecture.","brand":"Veratron","offers":[{"title":"Default Title","offer_id":56544458309972,"sku":"B00042201","price":128.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/veratron-linkup-resistive-kent.webp?v=1784803630"},{"product_id":"veratron-linkup-gateway-pyrometre-nmea-2000","title":"LinkUp Gateway pyrometer to NMEA 2000","description":"\u003cp\u003e\n    Designed for marine engine instrumentation, the \u003cstrong\u003eVeratron LinkUp Gateway pyrometer\u003c\/strong\u003e (SKU B00042301) converts exhaust gas temperature (EGT) measurements into NMEA 2000 data. This bridge enables precise monitoring of exhaust gases, essential for engine performance and safety. Its design ensures direct and efficient integration into existing NMEA 2000 networks.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Key Features\u003c\/h3\u003e\n\u003cp\u003e\n    The Veratron LinkUp range simplifies sensor integration into the NMEA 2000 network. This pyrometer-specific gateway eliminates the need for an additional NMEA 2000 converter, reducing wiring and facilitating installation where required. It is powered directly by the NMEA 2000 network, eliminating the need for external power. Its compliance with ISO 8846:1990 allows installation in engine compartments.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Configuration and Advanced Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    Configuration of the \u003cstrong\u003eLinkUp Gateway pyrometer\u003c\/strong\u003e is contactless via smartphone using the integrated AirWave\/Airlink interface, which uses a passive NFC antenna. This allows setting the sensor type, instance, and alarm thresholds without requiring expensive equipment or power. The gateway is optimized to interface with the Veratron pyrometer thermocouple (N03-320-264), providing a high-precision probe for measuring exhaust gas temperature. The wires are electrically compensated, and the probe has high temperature resistance, enabling early warning of potentially dangerous situations for the engine and helping to prevent severe damage. It can also serve as a guide to optimize fuel consumption. The supported NMEA 2000 PGN is 130316 for exhaust temperature.\n\u003c\/p\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":56544458539348,"sku":"B00042301","price":333.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/veratron-linkup-pyrometer-kent.webp?v=1784804009"},{"product_id":"veratron-capteur-temperature-150c-1-4-18-nptf-isole","title":"Temperature sensor 150°C 1\/4-18 NPTF insulated","description":"\u003cp\u003e\n    Designed for engine temperature measurement, the \u003cstrong\u003eVeratron A2C1988490001\u003c\/strong\u003e sensor is an insulated resistive model with a 1\/4-18 NPTF thread. It is specifically calibrated for a temperature range up to 150°C, making it suitable for applications where high temperatures are encountered.\n\u003c\/p\u003e\n\n\u003ch3\u003eEngine integration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor can be connected to a Veratron\/EMU analog input for integration into marine engine instrumentation systems. It is relevant in twin-diesel engine setups, where it can provide accurate temperature data for water or oil, provided its thread specifications and response curve match the engine's requirements.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical considerations before installation\u003c\/h3\u003e\n\u003cp\u003e\n    Before ordering or installing, it is imperative to validate the compatibility of this sensor with the existing thread on the engine block and the expected temperature range for the specific application. The 150°C range indicated by Veratron suggests this is not the standard choice for diesel engine water circuits, which typically operate around 120°C. A careful review of the engine specifications is therefore necessary to ensure reliable and accurate measurement.\n\u003c\/p\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":56544471253332,"sku":"A2C1988490001","price":46.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/veratron-capteur-temperature-150-1-4-18-nptf-isole-kent.webp?v=1784804096"},{"product_id":"veratron-jauge-levier-carburant-10-180-ohms-150-600mm","title":"Fuel level sender 10-180 ohms 150 to 600 mm","description":"\u003cp\u003e\n    Designed for accurate fuel level measurement, the \u003cstrong\u003eVeratron 10-180 ohms lever-type fuel level sender\u003c\/strong\u003e offers adaptability for tanks ranging from 150 to 600 mm in depth. This sender is a critical component for marine engine instrumentation, ensuring reliable readings of available fuel quantity.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration in engine monitoring systems\u003c\/h3\u003e\n\u003cp\u003e\n    In a twin diesel engine setup, this sender provides a solution for tanks requiring an adjustable lever-type probe with a 10-180 ohms resistance curve. Its adjustable capacity makes it compatible with a variety of tank configurations, offering installation flexibility.\n\u003c\/p\u003e\n\n\u003ch3\u003eSelection criteria for successful installation\u003c\/h3\u003e\n\u003cp\u003e\n    For optimal integration, this sender should be selected if the tank height is between 150 and 600 mm and if the existing or planned instrumentation is compatible with a 10-180 ohms resistance curve. These specifications ensure compatibility and accurate fuel level readings.\n\u003c\/p\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":56544473481556,"sku":"226-801-015-001C","price":61.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/veratron-jauge-carburant-10-180-150-600mm-kent.webp?v=1784804126"}],"url":"https:\/\/skysat.fr\/en-gb\/collections\/veratron.oembed","provider":"Skysat","version":"1.0","type":"link"}