{"product_id":"victron-energy-battery-protect-12-24v-220a-protection-batterie","title":"Battery Protect 12\/24V 220A","description":"\u003cp\u003e\n    Designed to extend the lifespan of your batteries, the \u003cstrong\u003eBattery Protect 12\/24V 220A\u003c\/strong\u003e from VICTRON ENERGY disconnects non-essential loads before complete discharge or a level too low for engine start. This device automatically manages 12V or 24V system voltages and supports a maximum continuous charging current of 220A, with a peak current of 600A for 30 seconds. It differs from lower models such as the BP-65 (65A) and BP-100 (100A) by its ability to handle higher loads. A key distinction from the Smart BatteryProtect is its programming method via the PROG pin to GND, rather than a Bluetooth interface.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features and protection\u003c\/h3\u003e\n\u003cp\u003e\n    The Battery Protect 12\/24V 220A features a 7-segment LED display for simplified configuration of engagement and disengagement thresholds. It offers a specific mode for Li-ion batteries, allowing direct control via an external BMS such as the VE.Bus BMS or the Lynx Smart BMS, and can also function as a charging switch. Its current consumption is ultra-low, at 1.5 mA in operation and 0.6 mA in standby or low-voltage cut-off mode, a benefit for autonomous systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Overvoltage protection is integrated, disconnecting the load if DC voltage exceeds 16V (for a 12V system) or 32V (for a 24V system). The device uses MOSFET switches, ensuring spark-free operation and resistance to ignition. A timed alarm output activates after 12 seconds of low voltage, without nuisance triggering during engine start, and supports up to 50 mA. Load disconnection is also timed at 90 seconds (immediate if controlled by VE.Bus BMS), with reconnection after 30 seconds when voltage recovers. The Battery Protect 12\/24V 220A is rated IP67 for its electronics (potted) and IP00 for its connections, and is mounted with a torque of 9 Nm, weighing 0.8 kg with dimensions of 62 x 123 x 120 mm. It is important to note that this is a unidirectional device, designed for current flow from the input (battery) to the output (load) only, and is not suitable for reverse currents from charging sources.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723840577876,"sku":"BPR000220400","price":63.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_60a2a081-3163-4fe7-bcaf-fbc7acbc7f9e.jpg?v=1772644431","url":"https:\/\/skysat.fr\/en-gb\/products\/victron-energy-battery-protect-12-24v-220a-battery-protection","provider":"Skysat","version":"1.0","type":"link"}