{"title":"Actisense","description":"\u003ch2\u003eActisense: choosing the right NMEA interface aboard\u003c\/h2\u003e\n\u003cp\u003eA Wi-Fi bridge, a USB interface, and an engine data converter do not serve the same purpose. To select from the Actisense models offered here, start with the protocol of your device, the available physical connection, and the destination of the data.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Actisense model for which use?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNMEA 2000 and wired NMEA 0183 device, with Wi-Fi:\u003c\/strong\u003e the \u003ca href=\"\/en-om\/products\/actisense-interface-nmea2000-nmea0183-bidirectionnel\"\u003eWGX-1-ISO\u003c\/a\u003e connects the wired device to the NMEA 2000 bus and broadcasts data to Wi-Fi-connected equipment. Its bidirectional conversion depends on the supported messages and configuration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNMEA 2000 network to tablet or computer via Wi-Fi:\u003c\/strong\u003e the \u003ca href=\"\/en-om\/products\/actisense-w2k-1-interface-nmea2000-wi-fi-enregistreur\"\u003eW2K-1\u003c\/a\u003e wirelessly transmits data from the bus and can log navigation data. It can also convert data between NMEA 2000 and NMEA 0183 for Wi-Fi-connected software, depending on the supported messages, but has no wired NMEA 0183 port.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNMEA 0183 device to computer via USB:\u003c\/strong\u003e the \u003ca href=\"\/en-om\/products\/actisense-usg-2-interface-nmea0183-usb-marine\"\u003eUSG-2\u003c\/a\u003e creates a bidirectional, isolated serial link with the PC. It is not a gateway for conversion to NMEA 2000.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnalog engine sensors and gauges to NMEA 2000:\u003c\/strong\u003e the \u003ca href=\"\/en-om\/products\/actisense-emu-1-bas-passerelle-analogique-moteur-nmea-2000\"\u003eEMU-1\u003c\/a\u003e digitizes compatible analog signals for publication on the NMEA 2000 network. Installation requires configuration tailored to the engine and sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eW2K-1 or WGX-1: what’s the difference?\u003c\/h3\u003e\n\u003cp\u003eThe W2K-1 is suitable if your data already comes from the NMEA 2000 network and you want to use it via Wi-Fi, with logging capability. The WGX-1 adds a wired NMEA 0183 connection: this is the key criterion when an existing device must be physically linked to the NMEA 2000 network.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to check before ordering\u003c\/h3\u003e\n\u003cp\u003eIdentify the protocol and connector of each device, the desired data flow direction, the NMEA 0183 sentences or NMEA 2000 PGNs required by the software or display, and the network power supply. For the EMU-1, Actisense requires a PC-to-NMEA 2000 interface such as the NGX-1 or NGT-1 for configuration via Toolkit; it is not included in this selection. \u003ca href=\"\/en-om\/pages\/contact\"\u003eContact Skysat\u003c\/a\u003e with your device references if you are planning a refit or if message compatibility is not confirmed.\u003c\/p\u003e\n\n\u003cp\u003eTechnical manufacturer sources: \u003ca href=\"https:\/\/actisense.com\/products\/wgx-1\/\"\u003eWGX-1\u003c\/a\u003e, \u003ca href=\"https:\/\/actisense.com\/products\/w2k-1-nmea-2000-wifi-gateway\/\"\u003eW2K-1\u003c\/a\u003e, \u003ca href=\"https:\/\/actisense.com\/products\/usg-2-nmea-0183-converter\/\"\u003eUSG-2\u003c\/a\u003e and \u003ca href=\"https:\/\/actisense.com\/products\/emu-1-nmea-2000-engine-data\/\"\u003eEMU-1\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"actisense-interface-nmea2000-nmea0183-bidirectionnel","title":"Actisense WGX-1-ISO - NMEA 2000 \/ NMEA 0183 Wi-Fi bridge","description":"\u003cp\u003e\n    Designed for the integration of marine electronic systems, the Actisense AS0120 interface provides bidirectional conversion between NMEA 2000 and NMEA 0183 standards. This device enables older equipment operating on NMEA 0183 to communicate with modern NMEA 2000 networks, and vice versa. It can also serve as a PC interface for the NMEA 2000 network, offering versatility for onboard data management and diagnostics.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The Actisense AS0120 interface stands out for its ability to handle high data transfer rates up to 230,400 baud, ensuring smooth and fast communication of information. The bidirectional conversion supports a wide range of NMEA 0183 sentences and NMEA 2000 PGNs, including the transmission of fast heading data (Fast Heading) at 10 Hz and AIS messages. For power supply, ISO variants such as the AS0120 are directly powered by the NMEA 2000 bus, simplifying installation by eliminating the need for a dedicated external power source. The device complies with NMEA 2000 certification and meets IEC 61162-1 \u0026 61162-2 requirements.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobustness and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The AS0120 design features opto-coupled isolation for the NMEA 0183 input and an ISO-Drive™ output for NMEA 0183, complemented by galvanic isolation on the NMEA 2000 bus connection (CAN bus). This architecture protects connected equipment from ground loops and voltage surges. The housing meets IP67 waterproofing standards, making it resistant to water and suitable for marine environments. It operates within a temperature range of -25°C to +70°C. Advanced configuration, including the definition of transmit (Tx) and receive (Rx) lists and data rates, is performed via the Actisense Toolkit or NMEA Reader software. Diagnostic LEDs facilitate network status monitoring and data reception checks. The AS0120, identified as a version of Actisense’s NGW-1 or NGX-1 series, is compatible with all NMEA 0183 versions without specific configuration and supports RS422, RS232, RS485 listeners on the output and RS422, RS232 transmitters on the input. Free software updates are available to keep the device current.\n\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":53723735753044,"sku":"AS0120","price":304.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_038bf6d3-b2fd-4c3f-af28-1b5f6b059bd6.png?v=1779962309"},{"product_id":"actisense-w2k-1-interface-nmea2000-wi-fi-enregistreur","title":"Actisense W2K-1 - NMEA 2000 to Wi-Fi Interface","description":"\u003cp\u003e\n    Designed for modern sailing, the \u003cstrong\u003eActisense W2K-1\u003c\/strong\u003e interface is a compact NMEA 2000 to Wi-Fi gateway optimized for data transfer to mobile devices such as laptops, tablets, and smartphones. It stands out for its ability to function simultaneously as an integrated voyage data logger, offering a two-in-one solution for connectivity and marine data analysis.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Data Versatility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eW2K-1\u003c\/strong\u003e provides bidirectional conversion of NMEA 2000 to NMEA 0183 data, ensuring broad compatibility with a wide range of navigation software and applications. It also supports broadcasting NMEA 2000 and RAW CAN data via Wi-Fi, using up to three separate data servers (TCP and UDP). Its IEEE 802.11 b\/g\/n Wi-Fi module operates on the 2.4 GHz band, with a range of approximately 30 meters in open space and a throughput of up to 150 Mbps. For power, the device uses the NMEA 2000 bus, with an average consumption of 70 mA at 12 VDC (2 LEN).\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated Voyage Data Logging\u003c\/h3\u003e\n\u003cp\u003e\n    A major feature of the \u003cstrong\u003eActisense W2K-1\u003c\/strong\u003e interface is its voyage data logging function. Supplied with a preinstalled 8 GB industrial micro SD card, it can be expanded up to 128 GB. This capacity allows for approximately 16 days of navigation data recording, with battery life ranging from 4 to 100 days depending on network load and configured filtering options. This feature is particularly useful for post-navigation analysis, troubleshooting, or optimizing vessel performance, positioning the W2K-1 as a more complete alternative than Wi-Fi gateways alone, which lack native logging capabilities.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eW2K-1\u003c\/strong\u003e interface is housed in a rugged IP67-rated enclosure, providing protection against temporary immersion and dust, making it suitable for demanding marine environments. Its compact dimensions of 106 mm x 73 mm x 24 mm and weight of 80 g facilitate discreet integration. The device offers flexible Wi-Fi operation, acting as an access point or connecting to an existing network in client mode. Diagnostic LEDs provide visual feedback on NMEA 2000 bus activity and Wi-Fi status. The included Actisense-i diagnostic tools allow checking NMEA 2000 bus voltage and the status of connected devices, while firmware updates can be performed remotely.\n\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":53723736080724,"sku":"AS0110","price":233.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_6b952078-c449-47ab-a402-1ae31ab4c4e0.jpg?v=1779962286"},{"product_id":"actisense-usg-2-interface-nmea0183-usb-marine","title":"Actisense USG-2 - NMEA 0183 to USB Interface","description":"\u003cp\u003e\n    Designed to ensure a reliable and secure connection between NMEA 0183, RS422, RS232 devices and a PC USB port, the \u003cstrong\u003eActisense USG-2\u003c\/strong\u003e interface converts a standard USB port into a bidirectional serial port compliant with marine requirements. This interface is particularly suited to applications requiring advanced electrical protection and broad compatibility with various equipment. It stands out from generic USB-to-serial converters due to its isolation level and robust design.\n\u003c\/p\u003e\n\n\u003ch3\u003eIsolation and Electrical Protection\u003c\/h3\u003e\n\u003cp\u003e\n    The USG-2 features 2500 V galvanic isolation for the input and 1500 V for the output, achieved through Actisense’s ISO-Drive™ technology and opto-isolated circuits. This functionality is critical for eliminating ground loops and effectively protecting connected equipment, including the host PC, from electrical damage. Inputs and outputs are also protected against overvoltage, electrostatic discharge (ESD), and short circuits, ensuring superior system integrity compared to non-isolated adapters. Its input circuit can capture low-level signals, often too weak for standard PC serial ports.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This interface supports a wide range of baud rates, from 300 to 230400 bps, making it compatible with various NMEA 0183 architectures as well as RS232\/RS422 requirements. It includes an isolated NMEA 0183 Listener (input) and NMEA 0183 Talker (output) port. USB compatibility extends to versions 1.1, 2.0, and 3.0. Power is supplied directly via the USB bus, with a maximum consumption of 50 mA. The device creates a virtual COM port on the connected PC, ensuring compatibility with standard marine navigation and display software.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Design and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The USG-2 is designed for the marine environment, with encapsulated electronics providing IP67 protection. Its ABS (PA-765) housing is flame-retardant (UL94 V-0), as is the PCB encapsulant made of polyurethane. The interface operates within a temperature range of -25°C to +70°C. A 2.0 m high-quality shielded USB cable and a high-retention USB connector are included, ensuring a robust and vibration-resistant connection. The tool-free plug-and-play connector, featuring a locking latch and strain relief, enables quick and secure installation. Diagnostic LEDs (blue for power, green for receive, orange for transmit) allow for quick verification of connection status and data transfer. The interface weighs 65 g, and the USB cable 70 g. A 3-year warranty is provided, extendable to 5 years after registration.\n\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":53723736342868,"sku":"USG-2","price":119.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c0553ae6-33c8-4ac5-be32-43a490798d0a.png?v=1779967461"},{"product_id":"actisense-emu-1-bas-passerelle-analogique-moteur-nmea-2000","title":"EMU-1-BAS - analog engine gateway to NMEA 2000","description":"\u003cp\u003eThe \u003cstrong\u003eActisense EMU-1-BAS\u003c\/strong\u003e is a specialized gateway for analog engine installations. It measures signals from existing gauges or sensors and then publishes the corresponding data on the NMEA 2000 network so that a compatible display, chartplotter, or instrument like a GMI can use it.\u003c\/p\u003e\n\n\u003ch3\u003eAnalog to NMEA 2000 conversion\u003c\/h3\u003e\n\u003cp\u003eActisense presents the EMU-1 as an analog-to-NMEA 2000 gateway for engine data. The module can handle parameters such as temperature, pressure, engine RPM, and fluid levels. It features six gauge\/parameter inputs, four alarm inputs, two auxiliary inputs, and two tachometer inputs.\u003c\/p\u003e\n\n\u003ch3\u003eMandatory configuration\u003c\/h3\u003e\n\u003cp\u003eThe EMU-1 is not a fully plug-and-play device. Actisense states that each EMU-1 must be configured for the installation, and an Actisense PC-to-NMEA 2000 gateway (\u003cstrong\u003eNGX-1 or NGT-1\u003c\/strong\u003e) is required to use the Actisense Toolkit, update the firmware, or diagnose data with NMEA Reader.\u003c\/p\u003e\n\n\u003ch3\u003eSolution B with existing display\u003c\/h3\u003e\n\u003cp\u003eIn an architecture where an NMEA 2000 display is already present, for example a Garmin GMI from the catalog, the EMU-1 is a relevant alternative to an integrated engine display. However, you must validate sensor compatibility, common engine grounds, and the number of required inputs before purchase.","brand":"Actisense","offers":[{"title":"Default Title","offer_id":56384595853652,"sku":"EMU-1-BAS","price":520.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/actisense-emu-1-bas-official.png?v=1783502009"}],"url":"https:\/\/skysat.fr\/en-om\/collections\/actisense.oembed","provider":"Skysat","version":"1.0","type":"link"}