{"title":"FT Technologies","description":"\u003cp\u003e\u003ca href=\"https:\/\/skysat.fr\/collections\/ft-technologies-capteurs\"\u003eSee FT sensor selection\u003c\/a\u003e · \u003ca href=\"https:\/\/skysat.fr\/blogs\/news\/choisir-anemometre-voilier-mecanique-ultrasonique-2026\"\u003eChoose between mechanical and ultrasonic\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eThree references to distinguish before choosing\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalog Reference\u003c\/th\u003e\n\u003cth\u003eDocumented selection identifier\u003c\/th\u003e\n\u003cth\u003eNext Verification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/skysat.fr\/products\/ft-technologies-ft602-d-sm-ev\"\u003eFT602-D-SM-EV\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eThe FT602-D-SM documentation describes serial and NMEA 2000 communications over CAN, configurable\u003c\/td\u003e\n\u003ctd\u003eVerify the delivered configuration and the contents of the EV packaging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/skysat.fr\/products\/ft-technologies-ft742-a-dm\"\u003eFT742-A-DM\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eAnalog variant: speed and direction outputs on 4–20 mA current loops; Direct Mount installation\u003c\/td\u003e\n\u003ctd\u003eVerify the receiver system inputs, loop scales, and mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/skysat.fr\/products\/ft-technologies-ft743-d-sm\"\u003eFT743-D-SM\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eDigital Surface Mount variant; data sheet FT743-SM describes RS422\/RS485 and NMEA 0183\u003c\/td\u003e\n\u003ctd\u003eVerify the mode, cable, power supply, and receiving device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSources: FT602 documentation 9000937 Rev A01, FT742-DM A4157-6-EN and FT743-SM 9000580 Rev A02, listed below. These references do not constitute validated compatibility with your installation.\u003c\/p\u003e\n\u003ch2\u003eSensor alone or FT743 kit?\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/skysat.fr\/products\/ft-technologies-ft743-d-sm\"\u003eFT743-D-SM\u003c\/a\u003e and the \u003ca href=\"https:\/\/skysat.fr\/products\/ft-technologies-ft743-d-sm-kit-1-5m\"\u003ekit FT743-D-SM KIT-1.5\u003c\/a\u003e are two distinct offers. Check the packaging details before comparing the overall cost. The name « kit » does not mean that all elements for your installation are included.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer's data sheet FT009 describes a connection cable for FT74X-SM, with one end having bare wires. This is not proof that the commercial kit contains all necessary adapters, protections, fasteners, or test equipment. \u003ca href=\"https:\/\/fttechnologies.com\/hubfs\/FT%20Tech%20-%20Blend\/Datasheet\/9000579_Datasheet%20for%20FT009%20Cable.pdf\"\u003eData sheet FT009, 9000579 Rev A01\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOne technology, several possible installations\u003c\/h2\u003e\n\u003cp\u003eAcoustic resonance is an ultrasonic approach different from time-of-flight. This distinction explains the sensor's principle; it is not sufficient to designate a model for a sailboat, a fixed station, or a mobile platform. \u003ca href=\"https:\/\/fttechnologies.com\/resources\/mechanical-vs-ultrasonic-wind-sensors-key-differences-acu-res\"\u003ePrinciple Acu-Res explained by FT\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor a boat, start with the expected data, mounting, and receiving electronics. For a fixed measurement, also examine the installation and data acquisition. For wind power or a drone, the specifications must identify the intended variant: an application cited by the manufacturer does not make all its references interchangeable.\u003c\/p\u003e\n\u003cp\u003eThis page presents the models linked above. It does not promise online availability of FT702LT or FT205.\u003c\/p\u003e\n\u003ch2\u003eCables, connectors and test equipment\u003c\/h2\u003e\n\u003cp\u003eChoose each accessory based on the sensor's reference, its interface, and its manual. A cable intended for one variant is not automatically suitable for another. Similarly, « Acu-Test » designates test equipment to be selected according to the interface, not a universal pack for the entire range.\u003c\/p\u003e\n\u003cp\u003eCables and associated equipment remain accessible in the grid. A Bulgin connector retains its brand: its presence in this collection does not transform it into an FT Technologies product and does not validate an association solely by its title.\u003c\/p\u003e\n\u003ch2\u003eDocumentation and guides\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel or Accessory\u003c\/th\u003e\n\u003cth\u003eManufacturer documentation used\u003c\/th\u003e\n\u003cth\u003eScope\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFT602\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/fttechnologies.com\/hubfs\/FT%20Tech%20-%20Blend\/Manuals\/FT602%20Manuals\/9000937_User_Manual_for_FT602-D-SM.pdf\"\u003eManual FT602-D-SM, 9000937 Rev A01, August 2026\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eBasic model, communication, and configuration; EV composition to be checked separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFT742-A-DM\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/app-na1.hubspotdocuments.com\/documents\/5925929\/view\/974525934?accessId=ca0df1\"\u003eData Sheet FT742-DM, A4157-6-EN\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRead the analog section for variant A, not the digital model section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFT743-D-SM\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/app-na1.hubspotdocuments.com\/documents\/5925929\/view\/1509532953?accessId=c31eb1\"\u003eData Sheet FT743-SM, 9000580 Rev A02\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSensor characteristics; not an inventory of a commercial kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFT009\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/fttechnologies.com\/hubfs\/FT%20Tech%20-%20Blend\/Datasheet\/9000579_Datasheet%20for%20FT009%20Cable.pdf\"\u003eCable Data Sheet, 9000579 Rev A01\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFT74X-SM cable, to be distinguished from the purchased pack composition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eTo broaden your choice: \u003ca href=\"https:\/\/skysat.fr\/blogs\/news\/choisir-anemometre-voilier-mecanique-ultrasonique-2026\"\u003emechanical or ultrasonic on a sailboat\u003c\/a\u003e, \u003ca href=\"https:\/\/skysat.fr\/pages\/comparateur-anemometres-voilier\"\u003emulti-brand comparator\u003c\/a\u003e and \u003ca href=\"https:\/\/skysat.fr\/blogs\/news\/nmea-2000-voilier-architecture-backbone-drops-terminateurs\"\u003eNMEA 2000 architecture\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eBefore Ordering\u003c\/h2\u003e\n\u003cp\u003eGather the exact reference, receiver interface, desired configuration, mounting, cable length and termination, power supply, and list of included items. If a compatibility point remains open, have it confirmed before purchase. Prices and availability information remain on the product pages; this page does not announce any lead times.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo the FT602, FT742, and FT743 have the same outputs?\u003c\/h3\u003e\n\u003cp\u003eNo. Reference FT742-A-DM is analog. Documents FT602-D-SM and FT743-SM describe other interfaces and formats, to be verified with their configuration. The family name is not sufficient.\u003c\/p\u003e\n\u003ch3\u003eDoes the FT743 kit contain everything for my installation?\u003c\/h3\u003e\n\u003cp\u003eDo not assume so. Check the exact contents of the pack and the needs of the receiver system. A cable data sheet does not prove the complete inventory of a commercial kit.\u003c\/p\u003e\n\u003ch3\u003eAre there documents in French?\u003c\/h3\u003e\n\u003cp\u003eFrench data sheets for FT602, FT742-DM, and FT743-SM are in the verified documentation folder. Consult the manufacturer's directory and check the model and revision; a translation does not replace the manual for another variant.\u003c\/p\u003e\n\u003ch3\u003eIs Acu-Test equipment suitable for all FT models?\u003c\/h3\u003e\n\u003cp\u003eNot by default. The pack reference and its interface must match the sensor. Check the equipment documentation before associating it.\u003c\/p\u003e\n\u003cp\u003eDocumentation verified on 16 October 2026. \u003ca href=\"https:\/\/fttechnologies.com\/ftsensor-datasheets\"\u003eOfficial FT directory\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommercial Transparency.\u003c\/strong\u003e Skysat markets the references presented. No exclusive distribution, universal compatibility, or immediate availability is claimed.\u003c\/p\u003e\n","products":[{"product_id":"cable-100-metres-default776","title":"FT Technologies - 100 Meter Cable","description":"\u003cp\u003e\n    This product is a 100-meter cable. It is designed for applications requiring extended cabling length, offering flexibility for various installations.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eCharacteristic\u003c\/th\u003e\n            \u003cth\u003eDetail\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eProduct Type\u003c\/td\u003e\n            \u003ctd\u003eCable\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLength\u003c\/td\u003e\n            \u003ctd\u003e100 meters\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eAdditional Information\u003c\/h3\u003e\n\u003cp\u003e\n    It is recommended to perform a thorough technical verification and confirm the suitability of this cable for the intended application before any integration into a system.\n\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723826520404,"sku":"DEFAULT776","price":1260.1,"currency_code":"EUR","in_stock":true}]},{"product_id":"ft-technologies-ft005-cable-analogique-15m","title":"FT Technologies FT005 - 15m Cable for 4-20mA Sensor","description":"\u003cp\u003e\nDesigned for industrial environments, the FT005 cable from FT Technologies is a 15-meter interconnection cable for 4-20 mA analog wind sensors.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\nThe FT005 cable is compatible with FT Technologies' FT702LT\/D, FT722-A, and FT742-A 4-20 mA analog wind sensors.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\nThe following table summarizes the technical characteristics of the FT005 cable:\n\u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eCharacteristic\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFT005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e15 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Range\u003c\/td\u003e\n\u003ctd\u003e-40 to +85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Bending Radius\u003c\/td\u003e\n\u003ctd\u003e57 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Permissible Current\u003c\/td\u003e\n\u003ctd\u003e6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Gauge\u003c\/td\u003e\n\u003ctd\u003e0.5mm² \/ AWG21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse with\u003c\/td\u003e\n\u003ctd\u003e4-20mA Wind Sensors FT702LT\/D, FT722-A \u0026amp; FT742-A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723826717012,"sku":"FT005","price":341.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cet9av5b_FT005-official-ft-technologies.jpg?v=1790065563"},{"product_id":"cable-200-metres-8-fils-default775","title":"FT Technologies Cable 200 meters 8 wires - Connectivity","description":"\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is a component whose detailed specifications must be validated by the integrator.\n\u003c\/p\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eFeature\u003c\/th\u003e\n            \u003cth\u003eDetail\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLength\u003c\/td\u003e\n            \u003ctd\u003e200 meters\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNumber of conductors\u003c\/td\u003e\n            \u003ctd\u003e8 wires\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eIntegration and conformity\u003c\/h3\u003e\n\u003cp\u003e\n    The precise electrical characteristics, shielding, and compatibilities with specific equipment must be determined by the end-user based on their application.\n\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723826880852,"sku":"DEFAULT775","price":2325.7,"currency_code":"EUR","in_stock":true}]},{"product_id":"ft-technologies-ft602-d-sm-ev","title":"FT Technologies FT602-D-SM-EV - Ultrasonic Anemometer","description":"\u003cp\u003e\n    The FT Technologies \u003cstrong\u003eFT602-D-SM-EV\u003c\/strong\u003e ultrasonic anemometer is a compact wind sensor designed for demanding applications. It uses patented Acu-Res® technology for precise wind speed and direction measurements without any moving parts.\n\u003c\/p\u003e\n\n\u003ch3\u003eAcu-Res® Technology\u003c\/h3\u003e\n\u003cp\u003e\n    Acu-Res® technology is distinguished by the use of acoustic wave resonance within a narrow cavity. The Acu-Res® software integrates automatic compensation for variations in temperature, pressure, and air humidity, ensuring data reliability.\n\u003c\/p\u003e\n\n\u003ch3\u003eMeasurement Performance and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFT602-D-SM-EV\u003c\/strong\u003e sensor measures wind speed from 0 to 75 m\/s with an accuracy of ±1% (at 25 m\/s) and wind direction from 0 to 360 degrees with an accuracy of ±1° (at 25 m\/s). It provides data at a frequency of 10 Hz, allowing real-time adjustment of connected systems. Each sensor is individually calibrated in a wind tunnel.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Environment\u003c\/h3\u003e\n\u003cp\u003e\n    With a weight of 170 g and a height of 57,5 mm, the \u003cstrong\u003eFT602-D-SM-EV\u003c\/strong\u003e is a lightweight and compact sensor, ideal for integrations where size and weight are critical factors. It is constructed from a UV-stabilized polycarbonate blend and benefits from IP67 protection, making it waterproof and weather-resistant. The sensor operates within a temperature range of -20°C to +60°C and can be stored from -40°C to +60°C. Its power supply is compatible with a range of 5 to 24 VDC. Mounting is surface-based.\n\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723827044692,"sku":"FT602-D-SM-EV","price":1428.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/5daui9r9_FT602-D-SM-EV-official-ft-technologies.png?v=1791816537"},{"product_id":"ft-technologies-ft058-acu-test-rs422","title":"FT Technologies FT058 Acu-Test - RS422 Test Pack","description":"\u003cp\u003e\n    The Acu-Test FT058 pack from FT Technologies is designed to facilitate the testing and configuration of digital wind transducers in a laboratory or office environment. It allows verification of the functionality of FT74X-D-SM (RS422) wind transducers, including wind speed and direction, and modification of common parameters such as heater setpoint and averaging filters.\n\u003c\/p\u003e\n\n\u003ch3\u003ePack Composition and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The Acu-Test FT058 pack includes the FT058 cable and FT Acu-Vis software. Each cable is identified by a unique serial number and manufacturing date for traceability.\n\u003c\/p\u003e\n\u003cp\u003e\n    This pack is used to test FT74X-D-SM (RS422) wind transducers. The Acu-Vis software is compatible with Windows XP, Vista, 7, 8, 8.1, 10, and 11 operating systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eRequired Items Not Included\u003c\/h3\u003e\n\u003cp\u003e\n    For full use of the Acu-Test FT058 pack, the following items are required and are not included:\n\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003eA FT74X-D-SM (RS422) wind transducer.\u003c\/li\u003e\n    \u003cli\u003eA laboratory power supply from 6 to 30 VDC (2A minimum) or a FT062 power supply (24VDC).\u003c\/li\u003e\n    \u003cli\u003eA computer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUsage Precautions\u003c\/h3\u003e\n\u003cp\u003e\n    It is imperative to avoid connecting or disconnecting sensors or power while energized during operation, as well as any incorrect wiring of power leads. Such actions could damage the equipment and are not covered by FT Technologies's standard warranty conditions.\n\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723827372372,"sku":"FT058","price":287.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/5fbq70xa_FT058-acu-test-rs422-official-ft-technologies.jpg?v=1791819937"},{"product_id":"ft-technologies-ft055-acu-test-analogique","title":"FT Technologies Acu-Test FT055 Pack - 4-20 mA analog sensor","description":"\u003cp\u003e\n    The Acu-Test Pack (Analog 4-20mA) FT055 from FT Technologies is designed to test, evaluate, and modify the settings of analog output FT wind sensors. It allows interfacing sensors with a computer for diagnostics and configuration.\n\u003c\/p\u003e\n\u003ch3\u003ePack contents and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This pack includes the FT055 cable and the FT Acu-Vis software. The FT055 test cable supports the following wind sensors:\n\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003eFT702LT\/D Wind Sensors (4-20mA) versions V20 and V22\u003c\/li\u003e\n    \u003cli\u003eFT722-A and FT742-A Sensors (FF, PM, DM, and DM50 variants) 4-20mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n    Each cable is identified by a unique serial number and manufacturing date to ensure traceability.\n\u003c\/p\u003e\n\u003ch3\u003eRequired items not included\u003c\/h3\u003e\n\u003cp\u003e\n    To use the Acu-Test FT055 pack, the following equipment is required and not included:\n\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003eAn analog output FT wind sensor.\u003c\/li\u003e\n    \u003cli\u003eA power supply: a laboratory power supply of 12-30 VDC (current limit up to 4A), or the FT062 power supply (24 VDC) which requires a regional C13 mains power cord.\u003c\/li\u003e\n    \u003cli\u003eA multimeter (ammeter, voltmeter, or oscilloscope) to measure sensor current loops, OR a compatible computer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAcu-Vis Software features\u003c\/h3\u003e\n\u003cp\u003e\n    The Acu-Vis software, compatible with Windows XP, Vista, 7, 8, 8.1, 10, and 11, provides a means to test the wind speed and direction functionality of analog FT sensors. It also allows modifying settings related to heating, filters, and direction offsets.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation considerations\u003c\/h3\u003e\n\u003cp\u003e\n    Any connection or disconnection of sensors or power during operation, or incorrect wiring of power leads, may damage the equipment and is not covered by FT Technologies's standard warranty conditions.\n\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723827568980,"sku":"FT055","price":279.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/5fadxrd6_FT055-acu-test-analogue-official-ft-technologies.jpg?v=1791819875"},{"product_id":"ft-technologies-ft064-acu-test-ft602-rs422","title":"FT Technologies FT064 - Acu-Test Pack for FT602 RS422 Sensor","description":"\u003cp\u003e\n    The Acu-Test \u003cstrong\u003eFT064\u003c\/strong\u003e pack from FT Technologies is designed to facilitate the testing and configuration of digital wind transducers in a laboratory or office environment. It allows diagnosis and adjustment of parameters for compatible sensors.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Function\u003c\/h3\u003e\n\u003cp\u003e\n    This pack is specifically for the FT602-D-SM wind transducer using the RS422 interface. It includes an Acu-Test cable and FT Acu-Vis software. The cable is identified by a serial number and manufacturing date for traceability. The FT Acu-Vis software is compatible with Windows XP, Vista, 7, 8, 8.1, 10, and 11 operating systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eUsage and Precautions\u003c\/h3\u003e\n\u003cp\u003e\n    The FT Acu-Vis software offers a simple method for verifying the functionality and modifying the settings of FT Technologies wind transducers. For detailed use of the software and configuration options, it is recommended to consult the FT602 user manual or contact FT Technologies technical support. Particular attention must be paid to connections: connecting or disconnecting sensors during operation can damage the equipment and is not covered by FT Technologies's standard warranty.\n\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723862761812,"sku":"FT064","price":304.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cexn8sl5_FT064-official-ft-technologies.jpg?v=1790065767"},{"product_id":"ft-technologies-ft016-cable-1-5m-ft602-sm","title":"FT Technologies FT016 - 1.5m Cable for FT602","description":"\u003cp\u003e\n    The \u003cstrong\u003eFT016 cable\u003c\/strong\u003e from FT Technologies is designed for FT602-D-SM wind sensor installations, including wind measurement systems in harsh environments and outdoor industrial monitoring. This 1,5-meter operating cable integrates 12 shielded conductors, providing robust and reliable connectivity for various communication interfaces.\n\u003c\/p\u003e\n\n\u003ch3\u003eDetailed Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eCharacteristic\u003c\/th\u003e\n            \u003cth\u003eDetail\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eProduct Name\u003c\/td\u003e\n            \u003ctd\u003eFT602 1.5 m Operating Cable\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eConnector Type (A side)\u003c\/td\u003e\n            \u003ctd\u003e12-pin (Bulgin PX0410\/12S\/6065)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCable Type\u003c\/td\u003e\n            \u003ctd\u003e12 shielded conductors\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCommunication Interfaces\u003c\/td\u003e\n            \u003ctd\u003eRS485, RS422, CANBus, UART\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOuter Diameter\u003c\/td\u003e\n            \u003ctd\u003e6,0 to 6,5 mm\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature Range\u003c\/td\u003e\n            \u003ctd\u003e-20°C to +85°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n\n        \u003ctr\u003e\n            \u003ctd\u003eCable Length\u003c\/td\u003e\n            \u003ctd\u003e1500 mm (±250 mm)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eEnd B\u003c\/td\u003e\n            \u003ctd\u003eUnterminated, stripped by 10 mm (±5 mm)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eQuality Compliance\u003c\/td\u003e\n            \u003ctd\u003eElectrical tests (open\/short circuit), crimping and connector compliant with IPC\/WHMA-A-620 Class 3\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eElectrical Interface and Pinout\u003c\/h3\u003e\n\u003cp\u003e\n    The pinout of the FT016 cable is detailed to facilitate integration with the FT602 sensor, supporting power, data ground, and multiple communication protocols.\n\u003c\/p\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003eFunction\u003c\/th\u003e\n            \u003cth\u003eFT016 Wire Color\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003e5-26VDC\u003c\/td\u003e\n            \u003ctd\u003eRED\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n            \u003ctd\u003e0V\u003c\/td\u003e\n            \u003ctd\u003eBLACK\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e3\u003c\/td\u003e\n            \u003ctd\u003eDATA GROUND\u003c\/td\u003e\n            \u003ctd\u003eGREY\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003eRS422 TX DATA A -\u003c\/td\u003e\n            \u003ctd\u003eYELLOW\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n            \u003ctd\u003eRS422 TX DATA B +\u003c\/td\u003e\n            \u003ctd\u003eGREEN\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n            \u003ctd\u003eRS485\/RS422 RX DATA B +\u003c\/td\u003e\n            \u003ctd\u003eRED-BLUE\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e7\u003c\/td\u003e\n            \u003ctd\u003eRS485\/RS422 RX DATA A -\u003c\/td\u003e\n            \u003ctd\u003eVIOLET\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e8\u003c\/td\u003e\n            \u003ctd\u003eUART RX\u003c\/td\u003e\n            \u003ctd\u003eWHITE\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e9\u003c\/td\u003e\n            \u003ctd\u003eUART TX\u003c\/td\u003e\n            \u003ctd\u003ePINK-GREY\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e10\u003c\/td\u003e\n            \u003ctd\u003eN\/C (not connected)\u003c\/td\u003e\n            \u003ctd\u003eBROWN\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e11\u003c\/td\u003e\n            \u003ctd\u003eCAN-LOW\u003c\/td\u003e\n            \u003ctd\u003eBLUE\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e12\u003c\/td\u003e\n            \u003ctd\u003eCAN-HIGH\u003c\/td\u003e\n            \u003ctd\u003ePINK\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723862892884,"sku":"FT016","price":178.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cex2xdtn_FT016-official-ft-technologies.jpg?v=1790065747"},{"product_id":"ft-technologies-ft018-cable-35m-ft602-rs422","title":"FT Technologies FT018 - RS422 35 m cable for FT602","description":"\u003cp\u003e\nThe FT018 cable from FT Technologies is specifically designed for FT602-D-SM ultrasonic wind sensor installations requiring RS422 data transmission over a distance of 35 meters. This 4-conductor shielded cable ensures dedicated and reliable connectivity, even in demanding environments, thanks to its resistance characteristics and optimized communication interface.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications of the FT018 cable\u003c\/h3\u003e\n\u003cp\u003e\nThe FT018 is a RS422 operating cable for FT602 sensors, characterized by a robust design and controlled electrical performance. It integrates a 12-pin connector at one end and offers preparation for connection at the other.\n\u003c\/p\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eCharacteristic\u003c\/th\u003e\n            \u003cth\u003eDetail\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eProduct type\u003c\/td\u003e\n            \u003ctd\u003eFT602 RS422 operating cable\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCable length\u003c\/td\u003e\n            \u003ctd\u003e35000 mm (35 m)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eConnector type (A end)\u003c\/td\u003e\n            \u003ctd\u003eBulgin PX0410\/12S\/4045, 12 pins\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCable type\u003c\/td\u003e\n            \u003ctd\u003e4 conductors, shielded, AWG24-28\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCommunication interface\u003c\/td\u003e\n            \u003ctd\u003eRS422\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOuter diameter\u003c\/td\u003e\n            \u003ctd\u003e4,0 to 4,5 mm\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOperating temperature range\u003c\/td\u003e\n            \u003ctd\u003e-20°C to +85°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \n        \u003ctr\u003e\n            \u003ctd\u003eStripping length (B end)\u003c\/td\u003e\n            \u003ctd\u003e10 mm ±5 mm\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatible crimp terminals\u003c\/td\u003e\n            \u003ctd\u003eBulgin SA3179\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eQuality compliance\u003c\/td\u003e\n            \u003ctd\u003eAll cables are electrically tested for open circuit and short circuit conditions.\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications and integration\u003c\/h3\u003e\n\u003cp\u003e\nThis cable is primarily intended for FT602-D-SM sensor installations requiring RS422 data transmission over long distances. It is suitable for wind measurement systems in harsh environments and outdoor industrial monitoring where connection durability and reliability are essential. \n\u003c\/p\u003e\n\n\u003ch3\u003eElectrical interface of the FT018\u003c\/h3\u003e\n\u003cp\u003e\nThe FT018 cable uses a specific pinout configuration for the essential communication and power functions of the FT602-D-SM sensor:\n\u003c\/p\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003ePin\u003c\/th\u003e\n            \u003cth\u003eFunction\u003c\/th\u003e\n            \u003cth\u003eFT018 wire color\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e1\u003c\/td\u003e\n            \u003ctd\u003e5-26VDC\u003c\/td\u003e\n            \u003ctd\u003eBROWN\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e2\u003c\/td\u003e\n            \u003ctd\u003e0V\u003c\/td\u003e\n            \u003ctd\u003eWHITE\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e4\u003c\/td\u003e\n            \u003ctd\u003eRS422 TX DATA A -\u003c\/td\u003e\n            \u003ctd\u003eYELLOW\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003e5\u003c\/td\u003e\n            \u003ctd\u003eRS422 TX DATA B +\u003c\/td\u003e\n            \u003ctd\u003eGREEN\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723863089492,"sku":"FT018","price":232.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cexfi91l_FT018-official-ft-technologies.jpg?v=1790065757"},{"product_id":"ft-technologies-ft743-d-sm","title":"FT Technologies FT743-D-SM - digital ultrasonic anemometer","description":"\u003cp\u003eDesigned for demanding environments, the \u003cstrong\u003eFT Technologies FT743-SM\u003c\/strong\u003e ultrasonic anemometer uses patented Acu-Res® technology to provide reliable wind data. This digital surface-mount sensor measures wind speed and direction with data availability greater than 99,9 %, even in the presence of significant vibration or electrical noise. Its corrosion-resistant, IP67 sealed anodized aluminum casing incorporates a heating system to ensure performance in extreme conditions.\u003c\/p\u003e\n\n\u003ch3\u003eSensor Measurements and Performance\u003c\/h3\u003e\n\u003cp\u003eThe FT743-SM is a digital sensor that provides wind, direction, acoustic temperature, and pressure data. It stands out for its instantaneous response of 10 Hz and shock resistance of 50 g.\u003c\/p\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eFeature\u003c\/th\u003e\n            \u003cth\u003eSpecification\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Speed Range\u003c\/td\u003e\n            \u003ctd\u003e0 to 75 m\/s (0 to 270 km\/h, 0 to 145,8 knots)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Speed Resolution\u003c\/td\u003e\n            \u003ctd\u003e0,1 m\/s (0,1 km\/h, 0,1 knot)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Speed Accuracy\u003c\/td\u003e\n            \u003ctd\u003e±0,3 m\/s (0-16 m\/s), ±2 % (16-40 m\/s), ±4 % (40-75 m\/s)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Direction Range\u003c\/td\u003e\n            \u003ctd\u003e0 to 360°\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Direction Resolution\u003c\/td\u003e\n            \u003ctd\u003e1°\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Direction Accuracy\u003c\/td\u003e\n            \u003ctd\u003e4° RMS\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompass Accuracy\u003c\/td\u003e\n            \u003ctd\u003e5° RMS\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePressure Measurement Range\u003c\/td\u003e\n            \u003ctd\u003e260 to 1260 hPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePressure Measurement Resolution\u003c\/td\u003e\n            \u003ctd\u003e0,0001 hPa\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003ePressure Measurement Accuracy\u003c\/td\u003e\n            \u003ctd\u003e±0,5 %\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eAcoustic Temperature Resolution\u003c\/td\u003e\n            \u003ctd\u003e0,1 °C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eAcoustic Temperature Accuracy\u003c\/td\u003e\n            \u003ctd\u003e±2 °C (for speed 5-60 m\/s, op. temp. -20°C to +60°C, temp. diff. \u0026lt;10°C)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eMeasurement Principle\u003c\/td\u003e\n            \u003ctd\u003eAcoustic resonance (auto. temp., pressure, humidity compensation)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOperating Altitude\u003c\/td\u003e\n            \u003ctd\u003e0 to 4000 m\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature Range (op. and storage)\u003c\/td\u003e\n            \u003ctd\u003e-40° to +85 °C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eHumidity\u003c\/td\u003e\n            \u003ctd\u003e0 to 100 %\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eProtection Rating\u003c\/td\u003e\n            \u003ctd\u003eIP67 (with supplied O-ring)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eHeating Parameters\u003c\/td\u003e\n            \u003ctd\u003e0° to 55 °C (user configurable)\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eIntegration and Power Supply\u003c\/h3\u003e\n\u003cp\u003eThe FT743-SM features a universal M12 8-pole circular connector for input\/output. It operates with a supply voltage of 6 V to 30 V DC, supporting battery operation with reduced heating capacity. Current consumption is 26 mA without heating and can reach 2 A with heating activated, for a maximum power of 60 W at 30 V.\u003c\/p\u003e\n\u003cp\u003eThe RS422 (full-duplex) and RS485 (half-duplex) digital interfaces allow flexible integration. Data is available in ASCII format, in polled or continuous output modes, and supports Polar and NMEA 0183 formats. The data update frequency is 10 Hz. The sensor includes error management with an indicator for invalid readings and an overspeed warning disabled by default if the wind exceeds 75 m\/s.\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723863220564,"sku":"FT743-D-SM","price":2737.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/5fbvp88u_FT743-D-SM-packshot.png?v=1791819945"},{"product_id":"ft-technologies-ft742-a-dm","title":"FT Technologies FT742-A-DM - Analog Ultrasonic Anemometer","description":"\u003cp\u003e\n    The \u003cstrong\u003eFT Technologies FT742-A-DM ultrasonic anemometer\u003c\/strong\u003e is designed for measuring wind speed and direction in a wide range of meteorological applications, including harsh environments such as icing, sand, dust, and offshore installations. This sensor uses acoustic resonance airflow detection technology for reliable measurement without moving parts, ensuring high data availability (greater than 99,9 %). Its hard-anodized aluminum alloy body offers resistance to corrosion, shocks, vibrations, solar radiation, and bird attacks.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technology\u003c\/h3\u003e\n\u003cp\u003e\n    The FT742-A-DM incorporates a thermostat-controlled three-element heating system, ensuring uniform heat distribution across its entire surface for efficient operation in icing-prone areas. The acoustic resonance measurement principle automatically compensates for variations in temperature, pressure, and humidity, ensuring accurate readings. The direct mounting design fits a tube with 33,7 mm outer diameter (EN10255 standard), secured by four M6 screws.\n\u003c\/p\u003e\n\n\u003ch3\u003eMeasurement Performance\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor provides precise wind speed and direction data. For speed, the range is 0 to 75 m\/s with a resolution of 0,1 m\/s and an accuracy of ±0,3 m\/s (from 0 to 16 m\/s), ±2 % (from 16 to 40 m\/s) and ±4 % (from 40 to 75 m\/s). Direction is measured over a range of 0 to 360° with a resolution of 1° and an accuracy of 4° RMS. Outputs are managed by two 4-20 mA analog current loops, one for speed and one for direction, updated 10 times per second and galvanically isolated. A semi-duplex RS485 configuration port is available for internal settings and temporary diagnostics.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Environment\u003c\/h3\u003e\n\u003cp\u003e\n    Required power supply ranges from 12 to 30 V DC (nominal 24 V DC), with a typical consumption of 31 mA (heater off) and a maximum of 6 A (heater on, limited to 4 A by default). The sensor is certified IP66, IP67, and IPX6K, ensuring protection against dust and powerful water jets, including high-pressure jets. Its operating and storage temperature range extends from -40°C to +85°C, and it operates in humidity conditions of 0 to 100 % and at altitudes up to 4000 m. The FT742-A-DM has passed over 30 environmental tests, including corrosion, icing, shock, and electromagnetic interference.\n\u003c\/p\u003e\n\n\u003ch3\u003eDetailed Technical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eFeature\u003c\/th\u003e\n            \u003cth\u003eValue\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eMeasurement Principle\u003c\/td\u003e\n            \u003ctd\u003eAcoustic resonance (automatic temperature, pressure, humidity compensation)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Speed Range\u003c\/td\u003e\n            \u003ctd\u003e0 to 75 m\/s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Speed Resolution\u003c\/td\u003e\n            \u003ctd\u003e0,1 m\/s\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Speed Accuracy\u003c\/td\u003e\n            \u003ctd\u003e±0,3 m\/s (0-16 m\/s), ±2% (16-40 m\/s), ±4% (40-75 m\/s)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Direction Range\u003c\/td\u003e\n            \u003ctd\u003e0 to 360°\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Direction Resolution\u003c\/td\u003e\n            \u003ctd\u003e1°\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWind Direction Accuracy\u003c\/td\u003e\n            \u003ctd\u003e4° RMS\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature Range (operating and storage)\u003c\/td\u003e\n            \u003ctd\u003e-40°C to +85°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eHumidity\u003c\/td\u003e\n            \u003ctd\u003e0-100 %\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOperating Altitude\u003c\/td\u003e\n            \u003ctd\u003e0-4000 m\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface\u003c\/td\u003e\n            \u003ctd\u003e2x 4-20 mA current loops (speed and direction), galvanically isolated\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eData Update Rate\u003c\/td\u003e\n            \u003ctd\u003e10 Hz\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eSupply Voltage\u003c\/td\u003e\n            \u003ctd\u003e12 V to 30 V DC (nominal 24 V DC)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eSupply Current (heater off)\u003c\/td\u003e\n            \u003ctd\u003eTypical 31 mA\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eSupply Current (heater on)\u003c\/td\u003e\n            \u003ctd\u003eMax 6 A (limited to 4 A and 99 W by default)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWeight\u003c\/td\u003e\n            \u003ctd\u003e380 g\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eMaterial\u003c\/td\u003e\n            \u003ctd\u003eAluminum alloy (hard anodized)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eI\/O Connector\u003c\/td\u003e\n            \u003ctd\u003e8-way\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eMounting Method\u003c\/td\u003e\n            \u003ctd\u003eScrew fixation for 33,7 mm outer diameter tube\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eProtection Rating\u003c\/td\u003e\n            \u003ctd\u003eIP66, IP67, IPX6K\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eSensor Height\u003c\/td\u003e\n            \u003ctd\u003e161 mm\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eMaximum Sensor Width\u003c\/td\u003e\n            \u003ctd\u003e56 mm\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eMaximum I\/O Connector Width\u003c\/td\u003e\n            \u003ctd\u003e22,1 mm\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eOuter Width of Mounting Tube\u003c\/td\u003e\n            \u003ctd\u003e33,7 mm\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eMounting Flange Width\u003c\/td\u003e\n            \u003ctd\u003e45 mm\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723863777620,"sku":"FT742-A-DM","price":2785.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_65a3999d-a387-4611-89bb-3686929c56f6.jpg?v=1790032064"},{"product_id":"bulgin-px0410-12s-6065-connecteur-compatible-ft602-sm","title":"Bulgin PX0410\/12S\/6065 connector compatible with FT602-SM","description":"\u003cp\u003eBulgin PX0410\/12S\/6065 connector compatible with FT602-SM is designed to provide a 12-contact female cable connection in demanding environments.\u003c\/p\u003e\u003ch3\u003eCompatibility and contents\u003c\/h3\u003e\u003cp\u003eCompatibility for use with FT602-SM connection as indicated by Skysat; this is not an original FT Technologies part.\u003c\/p\u003e\u003cp\u003eOne Bulgin PX0410\/12S\/6065 connector; contacts and tooling to be confirmed depending on packaging.\u003c\/p\u003e\u003ch3\u003eConfirmed specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003emanufacturer Bulgin\u003c\/li\u003e\n\u003cli\u003emanufacturer reference PX0410\/12S\/6065\u003c\/li\u003e\n\u003cli\u003e12 female contacts\u003c\/li\u003e\n\u003cli\u003eBuccaneer 400 series\u003c\/li\u003e\n\u003cli\u003eIP68 protection when correctly mated\u003c\/li\u003e\n\u003cli\u003e1 A and 50 V for this configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCaution point\u003c\/h3\u003e\u003cp\u003eCheck pinout, required contacts, and mechanical mating before use with an FT602-SM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTechnical source:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.bulgin.com\/products\/pub\/media\/bulgin\/data\/400_series_buccaneer.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003econsult the official documentation for the reference or family published by the manufacturer\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bulgin","offers":[{"title":"Default Title","offer_id":53723863941460,"sku":"4260997","price":17.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/capture_doc2_e304d948-71fd-4b00-8d4c-e9f6814fb310.png?v=1790032052"},{"product_id":"ft-technologies-ft743-d-sm-kit-1-5m","title":"FT Technologies FT743-D-SM KIT-1.5 | ultrasonic anemometer kit","description":"\u003cp\u003e\nDesigned for demanding environments, the \u003cstrong\u003eFT743-D-SM\u003c\/strong\u003e anemometer kit integrates an acoustic resonance wind sensor and a FT009 connection cable of 1,5 m. This system provides accurate wind speed, direction, temperature, and pressure data, with a digital architecture suitable for marine and industrial applications.\n\u003c\/p\u003e\n\n\u003ch3\u003eMeasurement Technology and Performance\u003c\/h3\u003e\n\u003cp\u003e\nThe FT743-D-SM sensor uses FT Technologies's exclusive Acu-Res® technology, which automatically compensates for variations in temperature, pressure, and humidity. This method ensures data availability greater than 99,9 % and a high signal-to-noise ratio. The sensor measures wind speed from 0 to 75 m\/s with a resolution of 0,1 m\/s and an accuracy of ±0,3 m\/s (0-16 m\/s), ±2 % (16-40 m\/s), and ±4 % (40-75 m\/s). Wind direction is measured over 360° with a resolution of 1° and an accuracy of 4° RMS. An integrated compass offers an accuracy of 5° RMS. Pressure measurement extends from 260 to 1260 hPa with a resolution of 0,0001 hPa and an accuracy of ±0,5 %. Acoustic temperature is measured with a resolution of 0,1 °C and an accuracy of ±2 °C under specific conditions (speed range 5-60 m\/s, -20 to +60 °C, temperature difference \u0026lt;10 °C).\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Integration\u003c\/h3\u003e\n\u003cp\u003e\nMade of corrosion-resistant anodized aluminum, the FT743-D-SM is watertight with an IP67 protection rating when properly installed with its O-ring. It integrates an adjustable thermostatic heating system from 0° to 55 °C for operation in extreme conditions. The sensor weighs 252 g and has a height of 71,2 mm. It withstands shocks up to 50 g and operates within a temperature range of -40° to +85 °C and humidity of 0 to 100 %, up to 4 000 m altitude. Power required is 6 to 30 V DC (nominal 24 V DC), with a current of 26 mA (heater off) or 2 A (heater on). The I\/O connector is a 8-pin M12 circular. The digital interface is RS422 (full-duplex) and RS485 (half-duplex) compatible, with data in ASCII, Polar, and NMEA 0183 formats (km\/h and knots only in NMEA 0183) at an update frequency of 10 Hz. The included FT009 cable of 1,5 m is designed for FT74X-SM sensors, with 8 conductors 24AWG (6 active) and a diameter of 7 mm. Its temperature range is -40 to +80 °C, its weight 0,1 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications Table\u003c\/h3\u003e\n\u003ctable border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eFT743-D-SM Sensor\u003c\/th\u003e\n\u003cth\u003eFT009 Cable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor Type\u003c\/td\u003e\n\u003ctd\u003eAcoustic resonance, digital anemometer\u003c\/td\u003e\n\u003ctd\u003e8-pin connection cable (6 active)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWind Speed Range\u003c\/td\u003e\n\u003ctd\u003e0 to 75 m\/s\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWind Speed Accuracy\u003c\/td\u003e\n\u003ctd\u003e±0,3 m\/s (0-16 m\/s), ±2 % (16-40 m\/s), ±4 % (40-75 m\/s)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWind Direction Range\u003c\/td\u003e\n\u003ctd\u003e0 to 360°\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWind Direction Accuracy\u003c\/td\u003e\n\u003ctd\u003e4° RMS (compass 5° RMS)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure Measurement Range\u003c\/td\u003e\n\u003ctd\u003e260 to 1260 hPa (accuracy ±0,5 %)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-40° to +85 °C\u003c\/td\u003e\n\u003ctd\u003e-40 to +80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e6 V to 30 V DC\u003c\/td\u003e\n\u003ctd\u003e30VDC \/ 2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent (heater off)\u003c\/td\u003e\n\u003ctd\u003e26 mA\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent (heater on)\u003c\/td\u003e\n\u003ctd\u003e2 A (max 60W at 30V)\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eRS422 (full-duplex), RS485 (half-duplex), NMEA 0183\u003c\/td\u003e\n\u003ctd\u003eRS422, RS485 (wiring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpdate Frequency\u003c\/td\u003e\n\u003ctd\u003e10 Hz\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O Connector\u003c\/td\u003e\n\u003ctd\u003eUniversal 8-pin M12 circular\u003c\/td\u003e\n\u003ctd\u003e8-pin (6 active) to sensor, bare wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e252 g\u003c\/td\u003e\n\u003ctd\u003e0,1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003e1,5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Bend Radius\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003ctd\u003e70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":53723864138068,"sku":"FT743-D-SM KIT-1.5","price":3418.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506627408212-1000.jpg?v=1783602811"},{"product_id":"ft-technologies-ft001-cable-numerique-15m","title":"FT Technologies FT001 - 15 m Digital Cable","description":"\u003cp\u003e\n    The FT001 cable by FT Technologies is a high-performance interconnection solution, designed for industrial environments. With a length of 15 meters, it provides the digital link for FT Technologies wind sensors compatible with RS485.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This cable is specifically designed for use with RS485 wind sensors FT702LT, FT722-D, and FT742-D. \n\u003c\/p\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eCharacteristic\u003c\/th\u003e\n            \u003cth\u003eValue\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLength\u003c\/td\u003e\n            \u003ctd\u003e15 m\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWeight\u003c\/td\u003e\n            \u003ctd\u003e1,3 kg\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eUse with\u003c\/td\u003e\n            \u003ctd\u003eRS485 Wind Sensors FT702LT, FT722-D \u0026amp; FT742-D\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eTemperature Range\u003c\/td\u003e\n            \u003ctd\u003e-40 to +85°C\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eMinimum Bending Radius\u003c\/td\u003e\n            \u003ctd\u003e57 mm\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eMaximum Current\u003c\/td\u003e\n            \u003ctd\u003e6 A\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eWire Gauge\u003c\/td\u003e\n            \u003ctd\u003e0,5 mm² \/ AWG21\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eIntegration and Environment\u003c\/h3\u003e\n\u003cp\u003e\n    The FT001 is designed for applications requiring a robust and reliable connection over a distance of 15 meters. Its extended temperature range and minimal bending radius make it suitable for demanding industrial installations.\n\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":57231599141204,"sku":"FT001","price":242.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cgh91i74_FT001-official-ft-technologies.jpg?v=1790068361"},{"product_id":"ft-technologies-ft009-cable-1-5m-ft74x-sm","title":"FT Technologies FT009 - 1,5 m connection cable for FT74X-SM","description":"\u003cp\u003eThe FT009 cable from FT Technologies is a 1,5-meter connection solution specifically designed for FT74X-SM wind sensors. \u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cp\u003eThis cable consists of 8 conductors of 24 AWG gauge. The entire cable has an outer diameter of 7 mm. It is designed to support power up to 30 VDC and a current of 2 A. Its operating temperature range extends from -40 to +80 °C, and its minimum bend radius is 70 mm. With a weight of 0,1 kg, it complies with the RoHS2 directive (2011\/65\/EU).\u003c\/p\u003e\u003ch3\u003eConnectivity and Cabling\u003c\/h3\u003e\u003cp\u003eThe FT009 cable is equipped with an 8-pin connector (of which 6 are active) on the FT74X-SM sensor side, and bare wires at the other end for custom termination. \u003c\/p\u003e\u003cp\u003ePins 7 and 8 are not connected.\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":57231602188628,"sku":"FT009","price":137.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cewvzgzs_FT009-official-ft-technologies.jpg?v=1790065731"},{"product_id":"ft-technologies-ft020-cable-numerique-15m-ft74x-sm","title":"FT Technologies FT020 - 15m FT74X-SM Digital Cable","description":"\u003cp\u003e\n    This FT020 cable is designed for connecting a FT74X-SM digital sensor. With a length of 15 meters, it allows for the integration of this sensor into various installation configurations.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This table summarizes the confirmed specifications of the FT020 cable:\n\u003c\/p\u003e\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eCharacteristic\u003c\/th\u003e\n            \u003cth\u003eValue\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInternal Reference\u003c\/td\u003e\n            \u003ctd\u003eFT020\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eProduct Type\u003c\/td\u003e\n            \u003ctd\u003eDigital Cable\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLength\u003c\/td\u003e\n            \u003ctd\u003e15 meters\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eCompatibility\u003c\/td\u003e\n            \u003ctd\u003eFT74X-SM Digital Sensor\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eIntegration and Limitations\u003c\/h3\u003e\n\u003cp\u003e\n    A verification of the pinout and electrical characteristics is required before any integration to ensure optimal compatibility with the FT74X-SM sensor and the host system.\n\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":57231602319700,"sku":"FT020","price":207.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cg6ehrrv_FT020-official-ft-technologies.jpg?v=1790067854"},{"product_id":"ft-technologies-ft022-cable-15m-rs422-ft602","title":"FT Technologies FT022 - RS422 Full Duplex 15m Cable for FT602-SM","description":"\u003cp\u003e\n    The FT022 cable from FT Technologies is designed for connecting FT602-SM sensors. With a length of 15 meters, it provides a RS422 Full Duplex serial data link.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications of the FT022 cable\u003c\/h3\u003e\n\u003cp\u003e\n    This cable integrates 6 conductors. It is specifically adapted for a RS422 Full Duplex interface, allowing complete bidirectional communication with the FT602-SM sensor.\n\u003c\/p\u003e\n\n\u003ctable\u003e\n    \u003cthead\u003e\n        \u003ctr\u003e\n            \u003cth\u003eCharacteristic\u003c\/th\u003e\n            \u003cth\u003eDetail\u003c\/th\u003e\n        \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eFT Technologies Reference\u003c\/td\u003e\n            \u003ctd\u003eFT022\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eLength\u003c\/td\u003e\n            \u003ctd\u003e15 meters\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eInterface type\u003c\/td\u003e\n            \u003ctd\u003eRS422 Full Duplex\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eNumber of conductors\u003c\/td\u003e\n            \u003ctd\u003e6\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n            \u003ctd\u003eSensor compatibility\u003c\/td\u003e\n            \u003ctd\u003eFT602-SM\u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eIntegration and points of attention\u003c\/h3\u003e\n\u003cp\u003e\n    The FT022 cable is an essential component for installing a FT602-SM sensor requiring a RS422 connection over a distance of 15 meters. Verification of pinout and electrical characteristics is recommended before any system integration, especially for critical applications or custom installations.\n\u003c\/p\u003e","brand":"FT Technologies","offers":[{"title":"Default Title","offer_id":57231602418004,"sku":"FT022","price":227.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cg6lrhlr_FT022-official-ft-technologies.jpg?v=1790067864"}],"url":"https:\/\/skysat.fr\/en-qa\/collections\/ft-technologies.oembed","provider":"Skysat","version":"1.0","type":"link"}