{"title":"Environmental sensors","description":"\u003ch2\u003eEnvironmental sensors: measuring conditions that influence the boat and its systems\u003c\/h2\u003e\n\u003cp\u003eEnvironmental sensors enhance onboard electronics by measuring physical conditions around the boat or technical installations: solar irradiance, temperature, pressure, humidity, brightness, or parameters useful for diagnostics. This collection includes sensors that are neither standard navigation probes nor fluid level sensors, but provide contextual data that can be used by a monitoring system.\u003c\/p\u003e\n\n\u003ch2\u003eFor solar, local weather, and technical monitoring\u003c\/h2\u003e\n\u003cp\u003eA sensor such as the Victron SolarSense allows tracking solar production by measuring actual sunlight and associated temperatures. This data helps interpret the performance of \u003ca href=\"\/en-tr\/collections\/panneaux-solaires\"\u003esolar panels\u003c\/a\u003e and \u003ca href=\"\/en-tr\/collections\/regulateurs-solaires\"\u003esolar charge controllers\u003c\/a\u003e: an MPPT that charges little does not have the same meaning under overcast skies, a hot panel, or a wiring fault.\u003c\/p\u003e\n\n\u003ch2\u003eConnection to onboard networks\u003c\/h2\u003e\n\u003cp\u003eDepending on the product, data can be transmitted to an NMEA 2000 network, VE.Can, a GX device, or a proprietary interface. The choice of sensor therefore depends as much on the measured parameter as on its integration with the existing ecosystem: chartplotter, gateway, display, Cerbo GX, cloud supervision, or diagnostic software.\u003c\/p\u003e\n\n\u003ch2\u003eSelection criteria\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMeasured parameters:\u003c\/strong\u003e irradiance, ambient temperature, panel temperature, pressure, humidity, or brightness.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible network:\u003c\/strong\u003e NMEA 2000, VE.Can, GX, Bluetooth, USB, or analog output.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRange and accuracy:\u003c\/strong\u003e verify according to use, especially for comparing solar output and actual conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e outdoor mounting, UV exposure, IP rating, cables, and connectors suitable for the marine environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSkysat advice\u003c\/h2\u003e\n\u003cp\u003eAn environmental sensor is most useful when it informs a decision: solar production diagnostics, energy bank monitoring, temperature alarm, or performance analysis. Before adding one, check where the data will be displayed and how it will be processed by the onboard system.\u003c\/p\u003e","products":[{"product_id":"airmar-weatherstation-220wx-htr-nmea-0183-rs422","title":"WeatherStation 220WX-HTR NMEA 0183 RS422","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":53723738669396,"sku":"44-856-1-01","price":2621.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506534314324-1000.jpg?v=1783601135"},{"product_id":"nke-barometre-hr-100-nmea-topline-alarmes","title":"HR 100 barometer with NMEA outputs and alarms","description":"\u003cp\u003e\n    Designed for demanding navigation, the NKE HR 100 barometer (reference 90-60-358) provides precise atmospheric pressure and trend measurements. This instrument delivers instant data on pressure and its variation over the last 10 hours, critical information for anticipating weather at sea. With a resolution of 0.01 mbar and a relative accuracy of +\/-0.5 mbar (at 25°C, from 800 to 1100 mbar), it is a reliable sensor for onboard systems. It also integrates air temperature measurement with a resolution of 0.01 °C and an accuracy of +\/-0.8 °C at 20°C.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced integration and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The HR 100 barometer stands out for its dual connectivity. It features NMEA 0183 outputs (yellow wire) transmitting MMB, MTA, and XDR sentences for atmospheric pressure and air temperature, ensuring broad compatibility with marine electronic equipment. Simultaneously, it integrates into the Topline bus of NKE systems, enabling centralized data management and settings. These dual connections can operate simultaneously, providing installation and usage flexibility. For users of NKE systems, parameters such as offset and damping are managed via the Topline display, optimizing data consistency.\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecific features and durability\u003c\/h3\u003e\n\u003cp\u003e\n    Beyond its barometric functions, the HR 100 offers an additional engine hours logging feature. By connecting a red wire to the engine switch (+12V after ignition), the device records engine runtime in tenths of an hour. Configurable alarms are available for pressure variation, high and low pressure thresholds, and exceeding a critical engine hours duration. Weighing 270 grams (5-meter cable included), operating on 10 to 16Vdc power, and consuming 25mA, it is designed for the marine environment. Its IP54 waterproofing provides protection against water splashes and dust, making it suitable for protected installations aboard. For full integration into an NKE system, the TOPLINE connection box (ref. 90-60-121) is available as an accessory.\n\u003c\/p\u003e","brand":"Nke","offers":[{"title":"Default Title","offer_id":53723751121236,"sku":"PF000126","price":285.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f64361f4-15a7-4f69-a501-f9a17570b8dd.jpg?v=1779962869"},{"product_id":"b-g-cable-ws300-700-20m","title":"WS300\/700 20m Cable","description":"\u003ch3\u003e \u003cstrong\u003eB\u0026amp;G 20m mast cable for WS300\/700 wind sensors\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n \u003cp\u003eThe 20-meter B\u0026amp;G mast cable is an essential component for ensuring the performance and reliability of your navigation system. Specifically designed for the \u003cstrong\u003eB\u0026amp;G WS310 and WS700\u003c\/strong\u003e series wired wind sensors, this cable provides a stable and durable connection between the masthead sensor and its interface, allowing for seamless integration into your NMEA 2000® network.\u003c\/p\u003e\n\n\n\u003ch3\u003e Reliable connection for accurate wind data\u003c\/h3\u003e\n\n\u003cp\u003e The accuracy of your wind data depends directly on the quality of the connection between the sensor and your instruments. This 20-meter (65-foot) cable uses pre-molded connectors and a robust thermoplastic sheath to withstand the harshest marine conditions. It ensures interference-free signal transmission, providing you with the reliable and consistent wind information you need for cruising or racing.\u003c\/p\u003e\n\n\n\u003ch3\u003e Simplified installation and optimized performance\u003c\/h3\u003e\n\n \u003cp\u003eAs a genuine B\u0026amp;G part, this cable is designed for optimal compatibility and performance. Pre-assembled connectors simplify installation, ensuring quick and hassle-free commissioning. The 20-meter length is suitable for a wide range of sailboats, providing a professional and durable wiring solution for your B\u0026amp;G anemometer.\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723755872596,"sku":"000-14396-001","price":97.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/d38851d1-05f8-4b31-a590-c3a3f6592403.jpg?v=1772037450"},{"product_id":"garmin-adaptateur-nmea-2000-capteur-vitesse-temperature-eau-gst-10","title":"NMEA 2000 adapter for Garmin GST™ 10 surface speed\/temperature water sensor","description":"\u003cp\u003e\n    Designed for marine system upgrades, the Garmin GST™ 10 NMEA 2000 adapter (part number 010-11328-00) converts analog data from speed and water temperature sensors into a digital NMEA 2000® signal. This solution allows boat owners to integrate existing sensors, such as the Garmin through-hull speed\/temperature sensor (Airmar ST850) 010-11413-00 or the Garmin transom-mount speed sensor 010-10279-02, into their NMEA 2000 network without requiring a full instrumentation replacement.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    The GST™ 10 adapter connects directly to compatible sensors, eliminating the need for additional wiring or cutting. It transmits water speed and surface temperature data to compatible Garmin displays, such as the GPSMAP series or the GMI™ 20 marine instrument display, via the NMEA 2000 network. The device supports an operating temperature range of -15°C to 70°C and is waterproof to IEC 60529 IPX7 standards, ensuring immersion up to 1 meter for 30 minutes. Its compact dimensions (24.7 x 17.0 x 78.6 mm) and weight of 380 g facilitate installation within 4.4 meters of the sensor.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Garmin positioning\u003c\/h3\u003e\n\u003cp\u003e\n    While newer products often integrate NMEA 2000 connectivity directly into sensors, the GST™ 10 targets the upgrade market specifically. It stands as a cost-effective solution to extend the lifespan of existing Garmin analog sensors rather than replacing them with native NMEA 2000 models such as the Airmar DST810 through-hull speed\/temperature transducer, which includes direct NMEA 2000 connectivity. With a maximum power consumption of 0.9 W and a LEN of 1, it integrates discreetly into the network without overloading the bus. Data configuration, including speed calibration and temperature source assignment, is performed via connected Garmin display units.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008763310420,"sku":"010-11328-00","price":121.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_f1b0f314-60d4-4aab-b28e-beceeae9bf10.jpg?v=1780435295"},{"product_id":"garmin-gtemp-10-th-capteur-temperature-traversant","title":"GTEMP 10-TH Through-hull Temperature Sensor","description":"\u003cp\u003e\n    Designed for accurate and rapid monitoring of water temperature, the \u003cstrong\u003eGTEMP 10-TH\u003c\/strong\u003e through-hull sensor from Garmin is a dedicated solution for marine environments. It integrates via the NMEA 2000® network, enabling smooth data transmission to compatible displays. This sensor is particularly useful for monitoring live wells, bait wells, and fishing zones.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccuracy and NMEA 2000 Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin GTEMP 10-TH\u003c\/strong\u003e offers a temperature detection range from -25 to 60 °C, with fast response and high sensitivity, essential for applications where thermal variation is a key factor. Unlike temperature sensors integrated into multifunction probes, the GTEMP 10-TH is a dedicated sensor, which can result in faster response and targeted measurement in its installation environment. Its NMEA 2000® integration ensures plug-and-play connectivity with existing systems, simplifying the addition of temperature data to a Garmin, B\u0026G, or Raymarine navigation network.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With compact dimensions, a length of 70 mm, and a thread diameter of 25.1 mm, the \u003cstrong\u003eGTEMP 10-TH\u003c\/strong\u003e sensor is designed for through-hull installation. It is compatible with hull thicknesses ranging from 0 to 57 mm. Its flush design minimizes turbulence under the hull. The device consumes 0.24 W (20 mA at 12V) and operates within a voltage range of 9 to 32 Vdc. It allows each sensor to be individually named on the display, a practical feature for distinguishing data from multiple live wells, for example. The sensor comes with a 1.8 m cable and an NMEA 2000® T-connector.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008764293460,"sku":"010-11413-10","price":106.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_452a563f-5493-4c92-8da1-29a60e38771b.jpg?v=1780435423"},{"product_id":"garmin-capteur-temperature-ondeck-surveillance-marine","title":"OnDeck™ Temperature Sensor","description":"\u003cp\u003e\n    Designed for remote monitoring, the \u003cstrong\u003eGarmin OnDeck™ temperature sensor\u003c\/strong\u003e (part number 010-13009-02) integrates with the Garmin OnDeck™ Hub to provide accurate temperature condition tracking. It allows monitoring temperature variations via the ActiveCaptain® app, offering constant visibility of onboard environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eMonitoring capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    This temperature sensor can measure temperatures across a wide range from -50°C to 105°C (-58°F to 221°F). This range makes it suitable for various applications, from managing temperature-sensitive cargo to monitoring equipment or boat compartments.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and applications\u003c\/h3\u003e\n\u003cp\u003e\n    The sensor seamlessly integrates with an existing Garmin OnDeck™ hub, simplifying its addition to a marine monitoring system. Its design ensures accurate readings and resistance to external conditions. It is a tool for monitoring environmental conditions on a boat.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56009466675540,"sku":"010-13009-02","price":22.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_d1cf76b4-c459-489d-b9ff-704fa69c238a.jpg?v=1780440036"},{"product_id":"navico-carburant-data-manager-nmea2000","title":"NMEA 2000 Fuel Data Manager","description":"\u003cp\u003e\n    Designed for precise fuel management aboard, the Navico 000-11522-001 fuel data manager is an essential module for modern navigation systems. It replaces the previous EP-85 model, offering improved fuel consumption monitoring via the NMEA 2000 network.\n\u003c\/p\u003e\n\u003ch3\u003eComprehensive Fuel Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    This fuel data manager monitors fuel flow and consumption directly from NMEA 2000-compatible engines. It compiles this information into \"fuel used\" readings, providing detailed data for seasonal use, per trip, and cumulative totals. The integrated flash memory ensures these data are retained, preventing loss after engine shutdown.\n\u003c\/p\u003e\n\u003ch3\u003eAccuracy and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The fuel data manager can also accurately indicate the remaining fuel level in the tank if the multifunction display (MFD) is updated after each refuel. It calculates tank level by comparing remaining fuel with the configured capacity. A single module can monitor up to three engines, and additional units can be added for more complex multi-engine configurations. It is compatible with Lowrance, B\u0026G, and Simrad displays, ensuring seamless integration into your existing navigation system. The module comes with a 0.5 m cable. It weighs 0.7 kg. The box dimensions are 7.6 cm (H) x 10.2 cm (L) x 25.4 cm (W) with a weight of 0.14 kg.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56047615803732,"sku":"000-11522-001","price":107.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15494625296724-1000.jpg?v=1783619055"},{"product_id":"navico-capteur-vitesse-tableau-arriere-nmea2000","title":"speed sensor","description":"\u003cp\u003e\n    The Navico 000-11519-001 speed sensor is a paddlewheel sensor designed to provide accurate speed-through-water measurements. It installs on the boat’s transom, making installation and use straightforward. This model is an effective replacement for the older EP-70 sensor.\n\u003c\/p\u003e\n\u003ch3\u003eAccuracy and NMEA 2000 Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Navico speed sensor excels at delivering precise readings at slow trolling speeds, where GPS accuracy may be limited. It comes with a 3.1 m (10 ft) cable and a Micro-C connector, ensuring a reliable connection to the NMEA 2000 network. Its ability to share paddlewheel speed data with any display connected to the network sets it apart from traditional sonar-based sensors.\n\u003c\/p\u003e\n\u003ch3\u003eExtended Features\u003c\/h3\u003e\n\u003cp\u003e\n    The 000-11519-001 speed sensor integrates into the NMEA 2000 network via a male connector. Paired with a fuel flow sensor on the same NMEA 2000 network, it enables fuel consumption calculation, adding a useful feature for navigation management. A NMEA 2000 T-connector is included for simplified integration.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56048775037268,"sku":"000-11519-001","price":90.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15494895042900-1000.jpg?v=1783619512"},{"product_id":"navico-capteur-temperature-nmea2000","title":"temperature sensor","description":"\u003cp\u003e\n    Designed for easy integration into marine systems, the Navico temperature sensor (part number 000-11520-001) provides versatile onboard temperature monitoring. It is NMEA 2000 network-compatible, allowing data display on compatible Navico multifunction displays (Simrad, Lowrance, and B\u0026G).\n\u003c\/p\u003e\n\n\u003ch3\u003eAccurate and Versatile Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor measures temperatures ranging from -20 °C to 80 °C (4 to 176 °F). Pre-configured for water temperature, it can be reconfigured via a Navico multifunction display to monitor other temperature types, such as outside air, interior, engine room, cabin, live wells, bait wells, refrigeration systems, or heating systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and NMEA 2000 Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The Navico temperature sensor is a standard or transom-mount solution. It features a total cable length of 3.45 meters, including 45 cm from the connector to the smart module and 3 meters from the module to the cable end. Integration into the NMEA 2000 network is simplified by the included NMEA 2000 T-connector.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56048775496020,"sku":"000-11520-001","price":102.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15494895501652-1000.jpg?v=1783619518"},{"product_id":"furuno-ss54-sonde-inox-traversante-dff3d","title":"SS54 — Compact through-hull stainless steel depth sounder with fairing and temperature\/motion sensor","description":"\u003cp\u003e\n    Specifically designed for the Furuno DFF3D multibeam sonar system, the \u003cstrong\u003eFURUNO SS54 through-hull compact stainless steel depth sounder\u003c\/strong\u003e provides detailed and stabilized underwater visualization. This depth sounder operates at a frequency of 165 kHz, delivering a 120° side beam for extended underwater coverage and a 10° longitudinal beam for targeted detection.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Detection Technology\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO SS54\u003c\/strong\u003e integrates temperature and motion sensors, essential for data accuracy. The motion sensor compensates for the boat’s pitch and roll, ensuring clear and stable sonar imagery even in rough sea conditions. The DFF3D system, to which the SS54 depth sounder is connected, offers display modes such as '3D Sounder History' and 'Triple\/Single Beam Sounder' for target tracking and seabed analysis. The depth sounder can operate down to a depth of 300 meters, with a power output of 1000 Watts.\n\u003c\/p\u003e\n\n\u003ch3\u003eConstruction and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Manufactured in 316 stainless steel, the \u003cstrong\u003eSS54 depth sounder\u003c\/strong\u003e is designed to withstand harsh marine environments. Its compact design simplifies installation. It can be mounted as a through-hull depth sounder with a fairing (shoe included) to minimize drag and optimize performance at high speeds, or flush-mounted in the keel without the fairing for a more discreet installation. It is supplied with two 10-meter cables: a bare cable for connection to the DFF3D sonar and a 7-pin cable for the motion sensor.\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO SS54 depth sounder\u003c\/strong\u003e is specifically developed for the Furuno DFF3D sounder module. It is compatible with the NavNet TZtouch 3, NavNet TZtouch 2, and NavNet TZtouch multifunction displays, as well as PC systems equipped with the TZ professional software running on Windows OS.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56076299403604,"sku":"00003537300","price":2324.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15500567544148-1000.jpg?v=1783620216"},{"product_id":"raymarine-transducteur-pression-0-1000-psi-4-20-ma","title":"Pressure transducer 0 to 1,000 PSI - 4-20 mA","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine 0 to 1,000 PSI pressure transducer\u003c\/strong\u003e is designed for precise fluid monitoring aboard vessels. This sensor measures pressure within a range of 0 to 1,000 PSI (pounds per square inch) and outputs a standard 4-20 mA analog signal. This output allows flexible integration with various existing marine monitoring systems, including those equipped with compatible NMEA 2000 current loop monitors.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Monitoring of Marine Systems\u003c\/h3\u003e\n\u003cp\u003e\n    With its 4-20 mA output, this transducer can be connected to compatible monitoring modules, such as the Maretron CLM100 (Current Loop Monitor) referenced in the technical documentation. Such a setup converts the analog signal into NMEA 2000 digital data, making pressure information available across the entire onboard network and viewable on multifunction displays. It enables monitoring of critical parameters such as engine oil pressure, hydraulic pressure, or fluid levels.\n\u003c\/p\u003e\n\u003ch3\u003eMarine Environment Design\u003c\/h3\u003e\n\u003cp\u003e\n    While specific material details are not provided, products of this type are engineered to withstand the demanding conditions of the marine environment. The Raymarine 0 to 1,000 PSI pressure transducer - 4-20 mA offers a technical solution for adding pressure measurement capabilities to a vessel management system.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076996739412,"sku":"PT-0-1000PSI-01","price":152.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_90d0b3d9-5839-4d72-8cdd-41c44f57fcb0.jpg?v=1781134722"},{"product_id":"raymarine-transducteur-pression-0-100-psi-4-20-ma","title":"Pressure transducer 0 to 100 PSI - 4-20 mA","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine PT-0-100PSI-01\u003c\/strong\u003e pressure transducer is designed for monitoring fluid pressures aboard vessels. This sensor provides accurate measurement within a 0 to 100 PSI range, suitable for various marine monitoring applications.\n\u003c\/p\u003e\n\u003ch3\u003eEssential fluid monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    With its standard 4-20 mA output, this transducer integrates with fluid management and monitoring systems. It enables control of critical parameters such as engine oil pressure, freshwater pressure, or other hydraulic circuits, ensuring reliable data collection for vessel safety and performance.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration with onboard systems\u003c\/h3\u003e\n\u003cp\u003e\n    The 4-20 mA output signal from the \u003cstrong\u003ePT-0-100PSI-01\u003c\/strong\u003e is an industry standard, facilitating connection to compatible monitoring modules, such as fluid pressure monitors (FPM100) or current loop monitoring modules (CLM100) that convert this analog data into digital information, for example for NMEA 2000 networks. This approach ensures flexible integration into existing vessel monitoring architectures.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076998639956,"sku":"PT-0-100PSI-01","price":149.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/PT-0-100PSI-01-family-01.jpg?v=1781134748"},{"product_id":"raymarine-transducteur-pression-0-10-psi-4-20-ma","title":"Pressure transducer 0 to 10 PSI - 4-20 mA","description":"\u003cp\u003e\n    Designed for fluid monitoring aboard, the \u003cstrong\u003eRaymarine pressure transducer 0 to 10 PSI - 4-20 mA\u003c\/strong\u003e is an industrial sensor for measuring low pressures. Its measurement range spans from 0 to 10 pounds per square inch (PSI), making it suitable for various marine applications such as monitoring freshwater, gray water, or fuel tank levels, or tracking low-pressure hydraulic systems.\n\u003c\/p\u003e\n\u003ch3\u003e4-20 mA technology for reliable integration\u003c\/h3\u003e\n\u003cp\u003e\n    This transducer uses a standard 4-20 mA current output. This type of signal is known for its robustness and low sensitivity to electromagnetic interference over long distances, ensuring stable and accurate data transmission. The 4-20 mA output is compatible with a wide range of monitoring modules and analog-to-digital interfaces, simplifying integration into vessel management and control systems.\n\u003c\/p\u003e\n\u003ch3\u003eVersatile marine applications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eRaymarine pressure transducer 0 to 10 PSI\u003c\/strong\u003e is an essential component for embedded monitoring systems. It provides boat owners with precise data on pressures in critical circuits, contributing to better resource management and early detection of potential malfunctions. This transducer is suited for marine applications, delivering performance for continuous monitoring of key vessel parameters.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077000048980,"sku":"PT-0-10PSI-01","price":148.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/PT-0-10PSI-01-family-01.jpg?v=1781134775"},{"product_id":"raymarine-transducteur-pression-0-3-psi-4-20-ma","title":"Pressure transducer 0 to 3 psi - 4-20 mA","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine 0 to 3 psi pressure transducer\u003c\/strong\u003e with 4-20 mA output is a sensor designed for fluid monitoring aboard vessels. This device measures pressure within a 0 to 3 psi range, providing a stable and precise 4 to 20 mA current signal for integration into marine monitoring systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The 4-20 mA output interface of the \u003cstrong\u003ePT-0-3PSI-01\u003c\/strong\u003e transducer is an industrial standard, simplifying its connection to compatible monitoring modules. Its 4-20 mA signal, an industry standard, facilitates connection to compatible monitoring modules for conversion to digital networks such as NMEA 2000, enabling integration into various fluid control and monitoring architectures.\n\u003c\/p\u003e\n\n\u003ch3\u003eMonitoring applications\u003c\/h3\u003e\n\u003cp\u003e\n    This pressure sensor is suited for various onboard monitoring applications, such as fluid level in low-pressure tanks or pressure detection in specific systems. It supports proactive management of vessel systems by providing accurate data on fluid conditions.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077001490772,"sku":"PT-0-3PSI-01","price":147.76,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/PT-0-3PSI-01-family-01.jpg?v=1781134798"},{"product_id":"raymarine-transducteur-pression-0-5000-psi-4-20-ma","title":"Pressure transducer 0 to 5,000 PSI - 4-20 mA","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine 0 to 5,000 PSI pressure transducer\u003c\/strong\u003e is designed for monitoring fluid systems on board. It converts a pressure ranging from 0 to 5,000 PSI into a standard 4-20 mA electrical signal. This type of output is recognized for its robustness and reliability in demanding environments, ensuring stable data transmission over long cable lengths.\n\u003c\/p\u003e\n\u003ch3\u003eEssential fluid monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    This transducer integrates into monitoring architectures for various applications, such as engine oil pressure, hydraulic pressure, or other critical fluid circuits. The 4-20 mA current signal, less sensitive to electromagnetic interference than voltage signals, allows for precise data acquisition for onboard management systems.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eRaymarine pressure transducer\u003c\/strong\u003e is an essential component for systems requiring continuous and reliable pressure measurement. It provides a stable analog output, ready to be interpreted by a compatible conversion module (not included) for integration into an NMEA 2000 network or a custom control system.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077002867028,"sku":"PT-0-5000PSI-01","price":154.53,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/PT-0-5000PSI-01-family-01.jpg?v=1781134824"},{"product_id":"raymarine-transducteur-pression-0-500-psi-4-20-ma","title":"Pressure transducer 0 to 500 PSI - 4-20 mA","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine PT-0-500PSI-01\u003c\/strong\u003e pressure transducer is designed for monitoring fluid systems aboard vessels. The device measures pressure within a range of 0 to 500 PSI and converts this measurement into a standard 4-20 mA current signal.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The 4-20 mA output signal allows integration with compatible marine monitoring systems, such as the Maretron FPM100 fluid pressure monitors or the CLM100 loop current monitoring modules. These modules, NMEA 2000-certified, digitize the pressure data for display on multifunction displays or centralized control systems. The 4-20 mA standard is recognized for its robustness and reliability in long-distance data transmission, minimizing potential electrical interference in marine environments.\n\u003c\/p\u003e\n\u003ch3\u003eMarine applications\u003c\/h3\u003e\n\u003cp\u003e\n    This transducer is suitable for monitoring various critical pressures aboard, including engine oil pressure, hydraulic system pressure, or other high-pressure fluid circuits. It fits into a comprehensive boat system monitoring approach, contributing to better management and predictive maintenance of essential equipment.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077002998100,"sku":"PT-0-500PSI-01","price":158.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_f72e9b70-c23d-4003-b2f7-e04f7943737e.jpg?v=1781134851"},{"product_id":"raymarine-transducteur-pression-0-50-psi-4-20-ma","title":"Pressure transducer 0 to 50 PSI - 4-20 mA","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine PT-0-50PSI-01\u003c\/strong\u003e pressure transducer is a sensor for monitoring fluids aboard vessels. It measures pressure in the 0 to 50 PSI range, providing a standard 4-20 mA analog output. This interface allows integration into existing marine monitoring systems, including those compatible with NMEA 2000 via an appropriate signal conversion module.\n\u003c\/p\u003e\n\n\u003ch3\u003eMonitoring and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With its 4-20 mA output, this transducer can interface with current loop monitors or compatible fluid pressure monitors to convert the analog signal into NMEA 2000 digital data. This capability ensures reliable transmission of pressure data to the onboard network, allowing users to view and manage fuel, water, oil, or other fluid levels via multifunction displays or monitoring software.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Environment Design\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for marine use, the \u003cstrong\u003eRaymarine PT-0-50PSI-01\u003c\/strong\u003e provides consistent and reliable pressure measurements. It contributes to boat safety and predictive maintenance of equipment by supplying essential data on the condition of fluid systems. Its standardized format facilitates replacement or addition of sensors in an existing installation.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077003915604,"sku":"PT-0-50PSI-01","price":159.71,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/PT-0-50PSI-01-family-01.jpg?v=1781134877"},{"product_id":"raymarine-transducteur-pression-0-5-psi-4-20-ma","title":"Pressure transducer 0 to 5 psi - 4-20 mA","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine PT-0-5PSI-01 pressure transducer\u003c\/strong\u003e is designed for fluid monitoring aboard vessels. This sensor measures pressure in the 0 to 5 psi range and outputs a 4-20 mA analog signal.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccurate Monitoring and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This pressure transducer is a component for ship monitoring and control systems, converting a physical pressure measurement into a standardized electrical signal. The 4-20 mA signal is known for its robustness and ability to transmit data over long cable lengths, minimizing interference.\n\u003c\/p\u003e\n\u003cp\u003e\n    It integrates with general system monitoring solutions, particularly for tracking fluid levels when paired with a fluid pressure monitoring module such as the Maretron FPM100 mentioned in the documentation. Compatibility with NMEA 2000-based systems is ensured via appropriate interface modules, enabling centralized pressure data display on navigation displays.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077005685076,"sku":"PT-0-5PSI-01","price":160.34,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/PT-0-5PSI-01-family-01.jpg?v=1781134901"},{"product_id":"raymarine-transducteur-pression-vide-1-bar-4-20ma","title":"Pressure transducer for vacuum up to 1 bar - 4-20 mA","description":"\u003cp\u003e\n    Designed for marine system monitoring, the \u003cstrong\u003eRaymarine PT-V-0-1BAR-01\u003c\/strong\u003e pressure transducer accurately measures vacuum up to 1 bar. This sensor is suitable for applications requiring negative pressure monitoring in various onboard installations.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003ePT-V-0-1BAR-01\u003c\/strong\u003e provides a standard 4-20 mA analog output signal. This interface ensures reliable integration with compatible monitoring modules and control systems, enabling stable data transmission over long distances and in electrically demanding environments.\n\u003c\/p\u003e\n\u003ch3\u003eMarine applications\u003c\/h3\u003e\n\u003cp\u003e\n    This pressure transducer is a component for fluid pressure monitoring systems. It is relevant for installers seeking to integrate a specific vacuum measurement into a dashboard or embedded monitoring system, particularly for engine circuits, water management systems, or auxiliary equipment.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077006995796,"sku":"PT-V-0-1BAR-01","price":154.77,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/PT-V-0-1BAR-01-family-01.jpg?v=1781134927"},{"product_id":"raymarine-transducteur-pression-submersible-0-3-psi-4-20-ma","title":"Submersible pressure transducer 0-3 psi - 4-20 mA","description":"\u003cp\u003e\n    Designed for precise pressure measurement in marine environments, the \u003cstrong\u003eRaymarine submersible pressure transducer PTS-0-3PSI-02\u003c\/strong\u003e offers an operating range of 0 to 3 psi. This sensor is equipped with a standard 4-20 mA current output, facilitating integration into various monitoring and control systems. Its submersible design makes it suitable for applications requiring direct immersion in the fluid to be measured.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003ePTS-0-3PSI-02\u003c\/strong\u003e transducer is intended for use in fluid monitoring systems. This transducer, with its 4-20 mA output, is designed to be integrated into existing fluid monitoring systems or analog data acquisition modules. For integration into an NMEA 2000® network, a 4-20 mA to NMEA 2000® signal converter module would be required.\n\u003c\/p\u003e\n\u003ch3\u003eMaritime applications\u003c\/h3\u003e\n\u003cp\u003e\n    This transducer is suitable for monitoring tanks and fluid lines aboard vessels. It can be used to monitor fuel levels, fresh water, wastewater, oil, or gasoline, contributing to optimized boat resource management. The 4-20 mA output is an industry standard that ensures reliable signal transmission and broad compatibility with existing equipment.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077008765268,"sku":"PTS-0-3PSI-02","price":247.13,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/PTS-0-3PSI-02-family-01.jpg?v=1781134952"},{"product_id":"raymarine-transducteur-pression-submersible-0-5-psi-4-20-ma","title":"Submersible pressure transducer 0-5 PSI - 4-20 mA","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine PTS-0-5PSI-02\u003c\/strong\u003e is a submersible pressure transducer with a 0-5 PSI measurement range and 4-20 mA output.\u003c\/p\u003e\n\u003cp\u003eIts low pressure range is designed for level or low-pressure measurements in marine environments. Integration into the onboard network requires a module compatible with a 4-20 mA input.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077012533588,"sku":"PTS-0-5PSI-02","price":389.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_f1c74ce0-2097-4816-9c35-7c9b806689da.jpg?v=1781134976"},{"product_id":"raymarine-sh-003-kit-detecteur-fumee-chaleur","title":"High-temperature smoke\/heat detector kit","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine SH-003\u003c\/strong\u003e is a high-temperature smoke\/heat detector kit designed for onboard safety. It monitors the risk of smoke or abnormal temperature rise in technical or living areas, depending on installation.\u003c\/p\u003e\u003ch3\u003eIntegration\u003c\/h3\u003e\u003cp\u003eThis model integrates with a compatible monitoring system, typically via an appropriate interface module. Proper placement, wiring, and regular testing are critical for reliable alerts.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077035602260,"sku":"SH-003","price":204.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/raymarine-sh-003-detecteur-fumee-chaleur.jpg?v=1781786179"},{"product_id":"raymarine-kit-detecteur-fumee-chaleur-nmea2000","title":"Smoke\/heat detector kit","description":"\u003cp\u003e\n    Designed for smoke and heat detection on board, the \u003cstrong\u003eRaymarine SH-004 smoke\/heat detector kit\u003c\/strong\u003e provides an essential marine safety solution. This sensor is intended to integrate with NMEA 2000-compatible vessel monitoring systems via a switching indicator module. It enables proactive monitoring of fire risks, contributing to crew and boat safety.\n\u003c\/p\u003e\n\u003ch3\u003eNMEA 2000 Integration for Comprehensive Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    Integrating the \u003cstrong\u003eRaymarine SH-004 smoke\/heat detector kit\u003c\/strong\u003e into an NMEA 2000 network is facilitated by compatible monitoring modules, such as the Maretron SIM100, which manages various switch inputs, including smoke and heat. The SIM100, like all Maretron products, is NMEA 2000-certified, meaning it has been tested and verified to meet critical safety criteria and to correctly implement network management and messaging. This module certification ensures reliable interoperability and secure transmission of detection data across the NMEA 2000 network.\n\u003c\/p\u003e\n\u003ch3\u003eReliability and Marine Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    When paired with NMEA 2000-certified modules like the SIM100, the NMEA 2000 network ensures that high-priority messages are always transmitted, and automatic addressing allows interference-free connection. NMEA 2000-certified modules comply with EMI and noise immunity requirements, as well as electrical isolation, to prevent network disruption. The \u003cstrong\u003eRaymarine SH-004 smoke\/heat detector kit\u003c\/strong\u003e fits into a holistic vessel monitoring approach compliant with maritime standards.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077037764948,"sku":"SH-004","price":251.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/SH-004-family-01.jpg?v=1781135342"},{"product_id":"raymarine-module-temperature-6-canaux-nmea2000","title":"Temperature module - 6-channel module converting temperature sensors to NMEA2000","description":"\u003cp\u003eThe \u003cstrong\u003eTMP100-01\u003c\/strong\u003e is a 6-channel temperature module designed to convert temperature sensor measurements into data usable on an NMEA 2000 network.\u003c\/p\u003e\u003ch3\u003eMulti-point temperature monitoring\u003c\/h3\u003e\u003cp\u003eWith its six channels, it centralizes multiple thermal measurement points on board: technical compartment, engine, refrigeration, tank, or any other area requiring monitoring based on the installation. Data can then be viewed on a display or a system compatible with NMEA 2000.\u003c\/p\u003e\u003ch3\u003eNetwork integration\u003c\/h3\u003e\u003cp\u003eThis product is a measurement and interface module, not a cable. It integrates into the boat's monitoring architecture to make temperatures available on the onboard network.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077082984788,"sku":"TMP100-01","price":260.31,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15500712214868-1000.jpg?v=1783604379"},{"product_id":"raymarine-sonde-temperature-gaz-echappement-egt-moteur","title":"Exhaust gas temperature (EGT) sensor","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine exhaust gas temperature (EGT) sensor\u003c\/strong\u003e is designed for monitoring marine engines. This equipment allows navigators to track a critical data point for engine condition and performance, contributing to better propulsion management on board.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    The concept of marine engine monitoring, as generally accepted in ship monitoring, highlights the importance of sensors such as the EGT probe. Integration within an embedded control and monitoring system enables centralization of engine data. Modern ship monitoring systems are designed for seamless data communication across the onboard network, allowing users to access vital information on dedicated displays or interfaces.\n\u003c\/p\u003e\n\n\u003ch3\u003eEngine Data Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Monitoring exhaust gas temperature is a key indicator of combustion and engine load. An EGT sensor, by providing real-time data, helps identify potential imbalances, overloads, or tuning issues that could affect engine longevity and efficiency. The approach of modern monitoring systems aims to collect accurate data for analysis and informed decision-making by the crew.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077085311316,"sku":"TP-EGT-1","price":124.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_a14f854c-455b-4a04-8809-d083d67f394a.jpg?v=1781136063"},{"product_id":"raymarine-sonde-temperature-immersion-nmea2000","title":"Temperature immersion probe","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine TP-IP-1\u003c\/strong\u003e is a temperature immersion probe designed to measure the temperature of a liquid or an immersed environment aboard a vessel. It must be integrated with the compatible measurement module or system specified in the installation.\u003c\/p\u003e\u003ch3\u003eTemperature sensor, not a fishfinder probe\u003c\/h3\u003e\u003cp\u003eThis reference should not be treated as a through-hull fishing transducer or a sonar transducer. Its purpose is temperature measurement for a monitoring or instrumentation installation.\u003c\/p\u003e\u003ch3\u003eCheck before ordering\u003c\/h3\u003e\u003cp\u003eThe critical point is compatibility with the data acquisition module used aboard, as well as the mounting type and cable routing in the area to be measured.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077088489812,"sku":"TP-IP-1","price":100.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_c9f3ebad-c5b1-42c4-aead-7a78b5159549.jpg?v=1781136102"},{"product_id":"raymarine-sonde-temperature-tr3k-anneau-boulon","title":"Temperature sensor with ring\/under-bolt mounting","description":"\u003cp\u003e\n    Designed for thermal data acquisition in marine environments, the \u003cstrong\u003eRaymarine TR3K\u003c\/strong\u003e temperature sensor is a reliable sensor for monitoring various critical points. Its ring\/under-bolt format allows for direct and secure mechanical attachment, ideal for installations on engine blocks, tanks, or pipes, ensuring accurate temperature measurement. This mounting method contributes to stable and durable integration on the boat.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration with the Monitoring System\u003c\/h3\u003e\n\u003cp\u003e\n    It is designed to provide temperature readings to a compatible temperature module, which then converts these analog data into digital information. This information can then be transmitted over a compatible monitoring network, enabling centralized visualization and analysis of temperatures on multifunction displays and embedded control systems.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The operating principle of the \u003cstrong\u003eRaymarine TR3K\u003c\/strong\u003e sensor is based on a simple and efficient thermal measurement. While detailed specifications for its measurement range or accuracy are not provided, its ring\/under-bolt design indicates a focus on robustness and ease of installation in demanding environments. Integrating this type of sensor into a compatible monitoring system via an appropriate module ensures monitoring that meets maritime safety and reliability requirements.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077101826388,"sku":"TR3K","price":28.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/TR3K-family-01.jpg?v=1781136316"},{"product_id":"raymarine-station-meteorologique-ultrasons-vent-temperature-humidite","title":"Ultrasonic weather station - Wind speed and direction, temperature and humidity","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine WSO200-01 ultrasonic weather station\u003c\/strong\u003e is a multifunction sensor designed to provide accurate weather data on vessels. This system integrates wind speed and direction, air temperature, and humidity measurements, all from a single unit installed at the masthead.\n\u003c\/p\u003e\n\n\u003ch3\u003eUltrasonic technology and SeaTalk NG integration\u003c\/h3\u003e\n\u003cp\u003e\n    The WSO200-01 uses ultrasonic technology for wind measurement, eliminating moving parts and reducing maintenance requirements. The short-arm transducer is designed for masthead installation, while the dedicated bridge ensures simplified connection to the vessel’s SeaTalk NG network. This integration allows chartplotters, multifunction displays, and Raymarine-compatible instruments to display and use real-time weather data.\n\u003c\/p\u003e\n\n\u003ch3\u003eData accuracy for navigation\u003c\/h3\u003e\n\u003cp\u003e\n    With its apparent wind measurement capabilities and true wind calculation (when paired with other boat speed sensors), the WSO200-01 provides critical information for navigation decision-making. Ambient temperature and humidity measurements complete the weather picture, contributing to a better understanding of environmental conditions. The unit is designed for straightforward installation and configuration, compatible with LightHouse 4 displays and i70 \/ i70s instruments.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56077118374228,"sku":"WSO200-01","price":499.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/maretron-wso200-01-ultrasonic-wind-weather-station.jpg?v=1782002338"},{"product_id":"raymarine-tp-aap-1-sonde-temperature-ambiante","title":"Ambient temperature sensor","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine TP-AAP-1 ambient temperature sensor\u003c\/strong\u003e measures ambient air temperature for onboard monitoring. It is used with a compatible module or system to display or process this measurement.\u003c\/p\u003e\u003ch3\u003ePositioning\u003c\/h3\u003e\u003cp\u003eThis is an environmental sensor, not a through-hull sensor or depth sounder transducer. Its location must be chosen to accurately represent the monitored area.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56081446109524,"sku":"TP-AAP-1","price":22.08,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/raymarine-tp-aap-1-sonde-temperature-ambiante.jpg?v=1781786182"},{"product_id":"maretron-pressostat-fluide-6-canaux-nmea-2000","title":"6-channel fluid pressure switch for monitoring reservoir level pressure using 4-20 mA pressure sensors","description":"\u003cp\u003e\n    The \u003cstrong\u003eMaretron FPM100-01\u003c\/strong\u003e is a 6-channel fluid pressure switch designed for monitoring tank levels aboard vessels. This module collects pressure data via 4-20 mA sensors, providing a solution for precise management of essential fluids.\n\u003c\/p\u003e\n\u003ch3\u003eMarine integration and compliance\u003c\/h3\u003e\n\u003cp\u003e\n    Fully NMEA 2000 certified, the FPM100-01 integrates directly into the onboard network, enabling data visualization on compatible displays. This certification ensures reliable interoperability with other NMEA 2000 equipment. Additionally, the module is tested and compliant with IEC 60945 for marine navigation and radio communication equipment, attesting to its robustness and reliability in the marine environment.\n\u003c\/p\u003e\n\u003ch3\u003eVersatile applications\u003c\/h3\u003e\n\u003cp\u003e\n    With its six-channel capability, the \u003cstrong\u003eMaretron FPM100-01\u003c\/strong\u003e is suitable for simultaneously monitoring multiple types of tanks, such as fuel, fresh water, wastewater, oil, or gasoline. It contributes to better awareness of the vessel's system status and proactive resource management onboard.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56082304663892,"sku":"FPM100-01","price":329.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15502026080596-1000.jpg?v=1783620485"},{"product_id":"furuno-materiel-installation-cp26-00300-cable-girouette-anemometre-30m","title":"CP26-00300 (30m) installation kit containing: FI50-SENSOR-30 cable 30m wind transducer\/vane anemometer","description":"\u003cp\u003e\n    The \u003cstrong\u003eCP26-00300 (30m)\u003c\/strong\u003e installation kit from FURUNO is designed for connecting FI-5001 and FI-5001L wind transducers\/vane anemometers. This kit includes a 30-meter cable and a mast foot junction box.\n\u003c\/p\u003e\n\n\u003ch3\u003eCable and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The FI50-SENSOR-30 cable, 30 meters long, is specifically designed for FURUNO FI-5001 and FI-5001L wind sensors. These sensors are analog wind transducers providing essential data on wind direction and speed. The FI-5001 sensor has an accuracy of better than ±10° for wind angle and ±5% (at 20 knots) for wind speed. It draws less than 40 mA on a 12V DC system. The kit is compatible with FURUNO FI-50 and FI-70 instrument displays and can be integrated into a NavNet 3D system or operate as standalone instruments via NMEA2000 protocol.\n\u003c\/p\u003e\n\n\u003ch3\u003eMast foot junction box\u003c\/h3\u003e\n\u003cp\u003e\n    The M03-9373 (Terminal Box) and its cover M03-9372 (Terminal Box Cover) are included to secure connections at the mast foot. This component neatly terminates the sensor cable, protecting connections in the marine environment. It facilitates integration of the FI-5001 analog wind transducer into the boat’s system, which may include displays and other NMEA2000 devices.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084155564372,"sku":"00001051100","price":66.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15502228652372-1000.jpg?v=1783620497"},{"product_id":"furuno-materiel-installation-cp26-00400-cable-girouette-50m","title":"CP26-00400(50m) installation kit containing: FI50-SENSOR-50 cable 50m wind transducer\/","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO CP26-00400 (50m) installation kit\u003c\/strong\u003e is designed for interconnecting Furuno FI-5001 and FI-5001L wind transducers\/vane anemometers with compatible display units. This kit ensures reliable wind data transmission, essential for navigation and offshore performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eKit contents and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This kit includes a \u003cstrong\u003e50-meter FI50-SENSOR-50 cable\u003c\/strong\u003e, a mast-foot junction box M03-9373 (Terminal Box) and its cover M03-9372 (Terminal Box Cover). It is specifically designed for Furuno FI-5001 and FI-5001L wind sensors. The system is compatible with FI-50 series instruments and can also be used with FI-70 displays when paired with an analog-to-NMEA converter (IF-NMEAFI).\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and performance\u003c\/h3\u003e\n\u003cp\u003e\n    Thanks to NMEA2000 compatibility and CAN bus connectors, the system offers a \"Plug and Play\" installation, simplifying wiring and integration into the onboard network. Wind data is transmitted as standard NMEA2000 PGNs. The FI-5001 wind sensor draws less than 40 mA at 12VDC and provides an angular accuracy of ±10° and a speed accuracy of ±5% at 20 knots. The cable and junction box design is suited for marine environments, ensuring durable construction.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084155662676,"sku":"00001061800","price":131.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15502228750676-1000.jpg?v=1783620509"},{"product_id":"furuno-fax-5-antenne-active-reception-meteo-marine","title":"FAX-5 Active antenna FAX5 for FAX 30\/410 without whip + 15m cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO FAX-5\u003c\/strong\u003e active antenna is a pre-amplification unit designed to enhance reception capability for FURUNO weather facsimile receivers. It is specifically compatible with models FAX-30, FAX-410, FAX-207, FAX-208A, FAX-210, and FAX-214, and can also interface with Furuno GPS and chartplotters.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications of the FAX-5 antenna\u003c\/h3\u003e\n\u003cp\u003e\n    This antenna operates over a wide frequency range from 80 kHz to 30 MHz, enabling full reception of weather facsimile and NAVTEX frequencies. The unit is supplied with a 15-meter coaxial interconnect cable. For full operation, a separate antenna whip must be added. The pre-amplification unit is mounted, and the antenna whip is screwed onto it. Proper grounding is recommended to optimize performance.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The FAX-5 antenna is an optional component for FAX-30 and FAX-410 receivers. The \u003cstrong\u003eFURUNO FAX-30\u003c\/strong\u003e receiver is a \"black box\" unit that turns any NavNet display or PC into a Weatherfax and NAVTEX receiver. It connects directly to a 10.4-inch NavNet display or an Ethernet hub, allowing weather charts to be viewed on a PC via an internet browser. It stores up to 12 weather facsimile images and 130 NAVTEX messages. The \u003cstrong\u003eFURUNO FAX-410\u003c\/strong\u003e integrates a thermal print head system on 10-inch thermal paper, offering 9 grayscale levels for clear charts. It features automatic channel selection and an integrated scheduler for fully automatic operation.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084156088660,"sku":"00001170200","price":559.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15502228980052-1000.jpg?v=1783604452"},{"product_id":"lcj-capteurs-cv3f-girouette-anemometre-ultrasons-nmea0183","title":"CV3F — Ultrasonic wind transducer \/ vane anemometer 12V for workboats.","description":"\u003cp\u003e\n    Designed for harsh marine environments, the \u003cstrong\u003eCV3F by LCJ CAPTEURS\u003c\/strong\u003e is an ultrasonic wind transducer \/ vane anemometer for workboats and commercial vessels. This instrument measures apparent wind using solid-state technology with no moving parts, ensuring reliable and accurate readings in varied conditions. It provides wind speed and direction data, along with air temperature.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnology and Accurate Measurements\u003c\/h3\u003e\n\u003cp\u003e\n    The CV3F uses four electro-acoustic transducers communicating via ultrasonic signals. Wind speed and direction are determined by analyzing the transit time differences of waves induced by airflow. An integrated temperature sensor refines data calibration.\n    \u003c\/p\u003e\u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWind speed range:\u003c\/strong\u003e 0.5 to 99.5 knots\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWind speed resolution:\u003c\/strong\u003e 0.1 knot\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWind speed sensitivity:\u003c\/strong\u003e 0.5 knot\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWind direction range:\u003c\/strong\u003e 0 to 359°\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWind direction resolution:\u003c\/strong\u003e 1 degree\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eWind direction sensitivity:\u003c\/strong\u003e ± 1.5 degrees\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eTemperature range:\u003c\/strong\u003e -10°C (no icing) to +50°C\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eTemperature sensitivity:\u003c\/strong\u003e ± 0.5°C\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n\n\u003ch3\u003eIntegration and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The CV3F operates on 10 to 14 Vdc (12V nominal) with a 25 mA current draw. The sensor transmits data via an NMEA 0183 digital output at 4800 baud. NMEA sentences include MWV (wind angle and speed, validity) updated twice per second, and XDR (air temperature). For NMEA 2000 compatibility, the CV3F can be paired with an optional WindyPlug interface.\n\u003c\/p\u003e\n\u003cp\u003e\n    The sensor ships with a 25 m RG58 coaxial cable and a junction box for power and display connections. Its solid-state design eliminates mechanical wear, making the unit shock-resistant and suitable for harsh marine conditions. The vertical sensor arm measures 31 cm.\n\u003c\/p\u003e","brand":"Lcj Capteurs","offers":[{"title":"Default Title","offer_id":56090834436436,"sku":"LC-CV3F","price":553.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15503888384340-1000.jpg?v=1783620964"},{"product_id":"lcj-capteurs-cv3f-baro-girouette-anemometre-barometre-ultrasons","title":"CV3F-BARO — Ultrasonic wind transducer \/ vane anemometer with barometer 12V for workboats.","description":"\u003cp\u003e\n    Designed for workboats and commercial vessels, the \u003cstrong\u003eLCJ CAPTEURS CV3F-BARO\u003c\/strong\u003e is an ultrasonic wind transducer \/ vane anemometer with barometer providing accurate and reliable weather data. This sensor measures wind speed and direction, air temperature, and atmospheric pressure without any moving parts, ensuring consistent performance and high durability in demanding marine conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccurate and reliable measurements\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCV3F-BARO\u003c\/strong\u003e uses ultrasonic technology to determine apparent wind speed and direction, with a measurement range of 0.5 to 99 knots and a resolution of 0.1 knot. Wind angle is measured from 0 to 359° with a resolution of 1° and a sensitivity of +\/- 1.5°. The sensor also integrates air temperature measurement over a range of -10°C to +50°C (frost-free) with a sensitivity of +\/- 0.5°C. Barometric pressure is provided with a resolution of 0.001 bar over a range of 0.900 to 1.100 bar. These data are updated once per second.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor operates on a 12V DC power supply (range 9 to 16 V DC, 24 or 25mA) and transmits its data via NMEA0183® sentences at 4800 baud. Output sentences include IIMWV for wind, WIMDA for atmospheric pressure, and WIXDR for temperature. Its NMEA0183® connectivity ensures broad compatibility with various navigation software and displays, including FURUNO systems (RD30, RD33, NavNet, TZT), GARMIN, and software such as Adrena, MaxSea, TimeZéro, OpenCPN, ScanNav, and SeaPro. The sensor comes with a 25-meter RG58 coaxial cable that connects to a 68 x 58 x 22 mm junction box, where connections are made via screw terminals. Integrated temperature compensation refines wind data calibration.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLCJ CAPTEURS CV3F-BARO\u003c\/strong\u003e is designed and manufactured in France, in the Nantes region. It comes with a 31 cm vertical arm and two stainless steel mounting clamps, facilitating installation on the mast. Weighing approximately 0.27 kg, it complies with the European CE standard.\n\u003c\/p\u003e","brand":"Lcj Capteurs","offers":[{"title":"Default Title","offer_id":56090836205908,"sku":"LC-CV3F-BARO","price":660.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15503889727828-1000.jpg?v=1783605106"},{"product_id":"lcj-capteurs-cv7v-baro-girouette-anemometre-ultrason-barometre-vertical","title":"CV7V-BARO — Ultrasonic wind transducer\/vane anemometer with vertical arm CV7V + barometer for powerboats.","description":"\u003cp\u003e\n    Designed for powerboats and adaptable to sailboats, the \u003cstrong\u003eLCJ Capteurs CV7V-BARO ultrasonic wind transducer\/vane anemometer\u003c\/strong\u003e provides apparent wind data and atmospheric pressure. This sensor uses ultrasonic technology, with no moving parts, ensuring robustness and long-term accuracy. It integrates a barometer for measuring atmospheric pressure and ambient temperature, useful for marine weather analysis.\n\u003c\/p\u003e\n\u003ch3\u003eAccurate and reliable measurements\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCV7V-BARO\u003c\/strong\u003e measures wind speed from 0.25 to 80 knots (0.13 to 41.16 m\/s) with a sensitivity of 0.25 knots and a resolution of 0.1 knots. Wind direction is measured with an accuracy of ±1° and a resolution of 1°, using four ultrasonic measurement vectors. Wind and temperature data are transmitted at a rate of 2 Hz. The device communicates via NMEA 0183 (MWV, XDR sentences) with a configurable baud rate of 4800 or 38400 baud\/sec.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and integration\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor features a 30 cm (Ø 16 mm) vertical aluminum arm, facilitating installation on horizontal surfaces such as cabin roofs, radar arches, or flybridges. The mount is compatible with Glomex© fittings. The \u003cstrong\u003eLCJ Capteurs CV7V-BARO\u003c\/strong\u003e operates on 8 to 30 V DC power, with a consumption of 9 to 12 mA. It is designed to function in temperatures from -15°C to +55°C and has an IP67 waterproof rating. The integrated barometer can be calibrated using a local reference weather station. Manufactured in France, this sensor comes with a 25-meter cable.\n\u003c\/p\u003e","brand":"Lcj Capteurs","offers":[{"title":"Default Title","offer_id":56090837778772,"sku":"LC-CV7V-BARO","price":746.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lcj-capteurs-lc-cv7v-baro-cv7-v-packshot-official.jpg?v=1781999772"},{"product_id":"airmar-200wx-station-meteo-ultrasons-vent-gps","title":"200WX — AIRMAR ultrasonic weather station for wind speed and direction, designed for professional fishing","description":"\u003cp\u003e\n    The \u003cstrong\u003eAIRMAR 200WX ultrasonic weather station\u003c\/strong\u003e is designed for professional boats and marine or land applications requiring accurate real-time weather data. This compact and robust station measures multiple environmental parameters without moving parts, improving durability and reducing maintenance requirements.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccurate and dynamic wind measurements\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAIRMAR 200WX\u003c\/strong\u003e uses ultrasonic technology for wind measurement, offering a speed range of 0 to 40 m\/s with a resolution of 0.1 m\/s and an accuracy of 5% at 10 m\/s across 4 angles. Wind direction is measured from 0° to 359.9° with a resolution of 0.1° and an accuracy of ±3° at 10 m\/s. It calculates true wind by integrating apparent wind data with vehicle speed and heading, provided by its internal 10 Hz GPS and 3-axis electronic compass.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated sensors and versatile connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with a 10 Hz GPS, the station provides position, speed over ground (SOG), and course over ground (COG) data with an accuracy of 3 meters CEP. It integrates a 3-axis electronic compass with a static heading accuracy of 1° and dynamic heading accuracy of 2°, featuring dynamic stabilization. A 3-axis gyrometer provides yaw rate data, and a 3-axis accelerometer offers pitch and roll information with an accuracy of ±1° within a range of ±30°.\n\u003c\/p\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAIRMAR 200WX\u003c\/strong\u003e also measures barometric pressure from 300 to 1100 hPa (accuracy ±0.5 hPa at 25°C) and air temperature from -40 to 80°C (accuracy ±1.1°C at 20°C). A relative humidity sensor option is available. The station is powered by 9 to 40 VDC with a consumption of less than 75 mA (\u003c0.9 W) at 12 VDC. It provides RS-232, RS-422, and CAN communication interfaces, supporting NMEA 0183\/ASCII and NMEA 2000 protocols for extended system integration. Its housing is rated IPX6 (IPX4 with the optional relative humidity sensor), weighs 300 g, and mounts on a standard 1\"-14 UNS thread. Its operating temperature range is -25 to 55°C.\n\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":56098344534356,"sku":"AI-200WXFU-RS422-01","price":1507.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15506992693588-1000.jpg?v=1783625977"},{"product_id":"lcj-capteurs-cv3f-al-24v-girouette-anemometre-ultrasons-24v","title":"CV3F-AL-24V — Ultrasonic wind transducer \/ vane anemometer 24V for professional vessels.","description":"\u003cp\u003e\n    Designed for apparent wind measurement on professional vessels and workboats, the \u003cstrong\u003eLCJ CAPTEURS CV3F-AL-24V\u003c\/strong\u003e ultrasonic wind transducer \/ vane anemometer provides accurate and reliable wind data. Its design with no moving parts ensures increased durability and consistent calibration in demanding marine conditions, eliminating mechanical wear.\n\u003c\/p\u003e\n\n\u003ch3\u003eUltrasonic Technology and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCV3F-AL-24V\u003c\/strong\u003e uses four electro-acoustic transducers to measure wind speed and direction by analyzing the differences in ultrasound transit times. This technical approach ensures apparent wind measurements from 0.6 to 99 knots with a resolution of 0.1 knot, and an angle from 0 to 359° with a resolution of 1° and a sensitivity of +\/-2.5°. It also measures air temperature from -10°C (no icing) to +50°C with an accuracy of +\/-0.5°C.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Powered by 24V DC (range 11 to 30V DC) and consuming 50 mA, this sensor is specifically suited to the electrical systems of professional vessels. It transmits data via NMEA 0183 at a baud rate of 4800, with sentences IIMWV, WIXDR, PLCJ, and PLCJE. The sensor comes with a 31 cm vertical arm and a 25-meter RG58 coaxial cable. Each unit undergoes rigorous testing in wind tunnels for accuracy and in climate chambers from -15°C to +55°C for robustness. It is manufactured in the Nantes region, France.\n\u003c\/p\u003e","brand":"Lcj Capteurs","offers":[{"title":"Default Title","offer_id":56098488451412,"sku":"LC-CV3F-AL-24V","price":643.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15507125764436-1000.jpg?v=1783626100"},{"product_id":"raymarine-co-co1224t-detecteur-monoxyde-carbone","title":"Carbon monoxide (CO) detector","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine CO-CO1224T\u003c\/strong\u003e is a carbon monoxide detector designed for onboard safety. It monitors the presence of CO, an odorless and dangerous gas that can come from engines, heaters, or generators.\u003c\/p\u003e\u003ch3\u003eOnboard use\u003c\/h3\u003e\u003cp\u003eThis model is suitable for cabins, living areas, and compartments where CO monitoring is required. The installation location must comply with the installation rules of the compatible monitoring system.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56110922301780,"sku":"CO-CO1224T","price":171.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_81f707a6-5eb2-41a4-927e-aee70c3d7567.jpg?v=1781448257"},{"product_id":"raymarine-capteur-humidite-temperature-interieure","title":"Indoor humidity\/temperature sensor","description":"\u003cp\u003e\n    Designed for environmental monitoring aboard, the \u003cstrong\u003eRaymarine IRHT-01 indoor humidity\/temperature sensor\u003c\/strong\u003e provides essential data for managing interior conditions on the vessel. This accessory is intended to operate in synergy with the Maretron CLM100 current loop monitor.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration with the Maretron NMEA 2000® system\u003c\/h3\u003e\n\u003cp\u003e\n    The IRHT-01 sensor is a component of the Maretron vessel monitoring and control system. Although the sensor itself is a probe, it integrates into the NMEA 2000® network via the Maretron CLM100 monitor, which is NMEA 2000® certified. This architecture centralizes humidity and temperature data and makes it available across the network for display or recording.\n\u003c\/p\u003e\n\u003ch3\u003eFunctionality and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    As an accessory to the Maretron CLM100 current loop monitor, the \u003cstrong\u003eRaymarine IRHT-01 sensor\u003c\/strong\u003e contributes to an overview of the boat's interior conditions. Maretron products are tested and verified to meet the requirements of the NMEA 2000® specification, ensuring correct implementation of network management and messaging for optimal reliability and interconnection.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56110995997012,"sku":"IRHT-01","price":255.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_10a4ffc8-55fb-46eb-a8f6-41bbcd6be964.jpg?v=1781448915"},{"product_id":"raymarine-interrupteur-magnetique-rectangulaire-interieur","title":"Rectangular magnetic switch (indoor)","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine MS-1035 rectangular magnetic switch\u003c\/strong\u003e is designed for position detection inside vessels. This component is suitable for monitoring applications requiring a binary signal (open\/closed), such as the status of doors, portholes, or lockers.\n\u003c\/p\u003e\n\n\u003ch3\u003eFunctionality and integration\u003c\/h3\u003e\n\u003cp\u003e\n    Operating on the principle of magnetic detection, the \u003cstrong\u003eRaymarine MS-1035\u003c\/strong\u003e provides a discrete signal when a magnetic field is present or absent. It is intended to be connected to existing onboard monitoring and control systems, enabling the position of movable elements to be integrated into the ship's overall interface. Its rectangular design facilitates discreet installation and precise alignment of components for reliable detection.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56111044559188,"sku":"MS-1035","price":7.04,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_a3f7d49c-ee4d-4d4a-8171-74e1385c6058.jpg?v=1781449339"},{"product_id":"raymarine-interrupteur-magnetique-cylindrique-interieur-exterieur","title":"Cylindrical magnetic switch (indoor\/outdoor)","description":"\u003cp\u003eThe \u003cstrong\u003eRaymarine MS-1055-N cylindrical magnetic switch\u003c\/strong\u003e is a state detection sensor. Its cylindrical design allows versatile integration.\u003c\/p\u003e\n\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eThis switch is designed for use \u003cstrong\u003eindoors and outdoors\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFunctionality\u003c\/h3\u003e\n\u003cp\u003eThe MS-1055-N model provides a simple binary signal. Based on magnetic detection, it ensures contactless operation without direct mechanical contact.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56111046656340,"sku":"MS-1055-N","price":13.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_89968fee-e822-4881-ae37-5c436f9588ab.jpg?v=1781449365"},{"product_id":"raymarine-interrupteur-magnetique-encastre-interieur-exterieur","title":"Flush-mounted magnetic switch (indoor\/outdoor)","description":"\u003cp\u003e\n    Designed for detecting open or closed states, the \u003cstrong\u003eRaymarine MS-1075 flush-mounted magnetic switch\u003c\/strong\u003e is a discreet solution for monitoring access points and onboard equipment. Suitable for indoor and outdoor installation, this switch is built to withstand marine environments.\n\u003c\/p\u003e\n\u003ch3\u003eVersatile monitoring for your vessel\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-1075 switch is ideal for securing and monitoring doors, hatches, lockers, or other critical access points. Its flush-mounted design allows for aesthetic integration and protection against impacts. It provides a simple signal that can be interpreted by a compatible monitoring module, such as a compatible switching indicator module (e.g., the Maretron SIM100 mentioned in the source data, or an equivalent Raymarine module), to alert the user or trigger other systems.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration with monitoring systems\u003c\/h3\u003e\n\u003cp\u003e\n    This type of switch is a key component for vessel monitoring and control systems. While the switch itself is a passive device, it is intended to be connected to compatible indicator modules, often NMEA 2000 certified for integration with modern monitoring systems. This enables centralization of your boat’s status information on a multifunction display or via monitoring software. It contributes to intelligent onboard data management, enhancing safety and situational awareness.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56111049441620,"sku":"MS-1075","price":2.64,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_f0b75788-423a-4847-8ba7-eb80a97e1fdc.jpg?v=1781449974"},{"product_id":"maretron-interrupteur-magnetique-rectangulaire-exterieur","title":"Rectangular magnetic switch (exterior)","description":"\u003cp\u003eThe \u003cstrong\u003eMaretron MS-1085-N rectangular magnetic switch (exterior)\u003c\/strong\u003e is designed for monitoring states aboard vessels. This sensor is intended for outdoor use and integrates into boat monitoring and control systems.\u003c\/p\u003e\n\u003ch3\u003eFunctionality and Integration\u003c\/h3\u003e\n\u003cp\u003eAs part of the \"Electricity \/ monitoring\" category, this magnetic switch is typically paired with switching state indicators such as Maretron’s SIM100. The SIM100 is used to monitor various states, such as doors, hatches, compartments, or other points requiring open\/close detection. The \u003cstrong\u003eMS-1085-N switch\u003c\/strong\u003e detects magnetic status, providing information to the vessel’s management system.\u003c\/p\u003e\n\u003ch3\u003eMarine-Environment Design\u003c\/h3\u003e\n\u003cp\u003eThe \"exterior\" designation indicates a design built to withstand maritime environmental conditions. While detailed specifications for the \u003cstrong\u003eMaretron MS-1085-N rectangular magnetic switch (exterior)\u003c\/strong\u003e are not provided, Maretron products—often integrated into monitoring systems—are typically NMEA 2000® certified and tested to IEC 60945 for marine navigation and radio communication equipment. This ensures network integration and reliability in marine environments.","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56111105376596,"sku":"MS-1085-N","price":15.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_e302bd23-9cc4-43ea-853b-9e2724cfa343.jpg?v=1781450079"},{"product_id":"raymarine-pt-snub-01-amortisseur-pression","title":"Pressure snubber","description":"\u003cp\u003e\n    The \u003cb\u003eRaymarine PT-SNUB-01\u003c\/b\u003e pressure snubber is designed for marine monitoring systems to stabilize pressure readings and protect associated sensors. It integrates into fluid monitoring setups, contributing to the accuracy and longevity of the equipment.\n\u003c\/p\u003e\n\u003ch3\u003eFunctionality and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This passive component smooths pressure fluctuations in hydraulic or fluid circuits. By minimizing spikes and rapid variations, it preserves the integrity of pressure sensors, which are critical for tracking tank levels (fuel, water, wastewater) or engine pressures. Stabilizing pressure signals ensures more reliable data for onboard monitoring systems.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Application\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cb\u003ePT-SNUB-01\u003c\/b\u003e pressure snubber targets applications where pressure measurement stability is critical. It reduces premature sensor wear caused by pulsations and shocks, ensuring consistent performance of the monitoring system. Its design allows direct integration into fluid lines, upstream of measurement sensors.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56111110259028,"sku":"PT-SNUB-01","price":56.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_6811ddaf-efc8-406f-bd16-38e2f6563d5a.jpg?v=1781450159"},{"product_id":"mastervolt-capteur-temperature-15m-batterie","title":"Temperature sensor 15 m (49.2 ft)","description":"\u003cp\u003e\n    The Mastervolt temperature sensor (reference 41500800) is designed to optimize battery charging and improve safety in marine and standalone electrical systems. With a 15-meter (49.2 ft) cable length, this sensor integrates with Mastervolt systems for precise thermal management.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This temperature sensor features an overmolded heat probe, ensuring reliable durability and performance. It enables temperature-compensated charging, optimizing battery efficiency and extending their lifespan. The sensor is compatible with Mastervolt marine battery chargers and Combi inverter\/chargers, including ChargeMaster (Plus), Mass Charger, CombiMaster, Mass Combi Ultra, and Mass Combi Pro models. It is also compatible with MacPlus, though without RJ11 connectivity in this specific case.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\n\u003cp\u003e\n    Sensor installation is simplified by its connectivity via a 6P6C modular plug and the inclusion of double-sided adhesive tape for secure mounting. By providing real-time battery temperature data, it actively contributes to preventing thermal runaway, a critical safety element for lead-acid and lithium battery technologies. Optimizing the charging cycle with this sensor reduces alternator or generator runtime, contributing to fuel savings and improved acoustic comfort. Its robust design withstands engine vibrations, ensuring consistent performance even in demanding environments.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":56137072443732,"sku":"41500800","price":50.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15515053228372-1000.jpg?v=1783626979"}],"url":"https:\/\/skysat.fr\/en-tr\/collections\/environmental-sensors.oembed","provider":"Skysat","version":"1.0","type":"link"}