{"title":"Simrad","description":"\u003cp\u003eSimrad is a leading brand for marine navigation electronics, with a range focused on autopilots, radars, chartplotters, and onboard instruments. At Skysat, the Simrad collection includes equipment to modernize an existing installation or build a complete architecture around an NMEA 2000 network.\u003c\/p\u003e\n\u003cp\u003eSimrad \u003ca href=\"\/en-tr\/collections\/pilotes\"\u003eautopilots\u003c\/a\u003e cover control units, computers, commands, sensors, and interface modules. Depending on the boat, the installation can use electric or hydraulic \u003ca href=\"\/en-tr\/collections\/actionneurs\"\u003eactuators\u003c\/a\u003e, \u003ca href=\"\/en-tr\/collections\/interfaces-pilote\"\u003eautopilot interfaces\u003c\/a\u003e, and \u003ca href=\"\/en-tr\/collections\/capteurs-pilote\"\u003eautopilot sensors\u003c\/a\u003e suited to the steering system.\u003c\/p\u003e\n\u003cp\u003eFor detection and safety during navigation, Simrad \u003ca href=\"\/en-tr\/collections\/radars\"\u003eradars\u003c\/a\u003e, including the HALO series, monitor traffic, coastlines, squalls, and obstacles around the boat. They integrate with compatible displays and supplement navigation data in busy areas or reduced visibility.\u003c\/p\u003e\n\u003cp\u003eSimrad \u003ca href=\"\/en-tr\/collections\/traceurs\"\u003echartplotters\u003c\/a\u003e and \u003ca href=\"\/en-tr\/collections\/ecrans-traceurs\"\u003echartplotter displays\u003c\/a\u003e serve as the control center for navigation, cartography, radar, autopilot, and sensor data. Available models can also be complemented with \u003ca href=\"\/en-tr\/collections\/radios-vhf-ais\"\u003eVHF \/ AIS equipment\u003c\/a\u003e, GPS antennas, compasses, and \u003ca href=\"\/en-tr\/collections\/accessoires-reseau\"\u003enetwork accessories\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBefore selecting a Simrad product, verify compatibility with your NMEA 2000 network, the type of steering system, actuator power, installed display, available space for the radar, and the boat’s autopilot requirements. To browse the entire electronics range, you can also return to the \u003ca href=\"\/en-tr\/collections\/electronique-navigation\"\u003eNavigation \u0026 Electronics\u003c\/a\u003e collection.\u003c\/p\u003e","products":[{"product_id":"simrad-ais-v3100-transpondeur-classe-b-sotdma-000-14380-001","title":"AIS Class B V3100 SOTDMA","description":"\u003cp\u003eThe SIMRAD V3100 is a Class B AIS transponder featuring SOTDMA (Self-Organising Time Division Multiple Access) technology. Designed for demanding navigators, whether professional or recreational, it offers a superior level of safety and performance compared to standard Class B AIS transponders using CSTDMA technology.\u003c\/p\u003e\n\n\u003ch3\u003eSOTDMA Technology: Enhanced Safety and Performance\u003c\/h3\u003e\n\u003cp\u003eUnlike CSTDMA (Carrier-Sense) technology, which waits for a free transmission slot, SOTDMA uses a self-organising access scheme, similar to that of Class A AIS systems. This ensures reliable transmission of your data, even in areas with very dense maritime traffic. With a 5W output power, more than double the 2W of CSTDMA devices, the V3100 provides a significantly longer detection and transmission range. Furthermore, the update frequency for dynamic data is considerably higher, reaching an interval of 5 seconds at speeds above 23 knots, compared to 30 seconds for a conventional CSTDMA AIS. This responsiveness is crucial for anticipating and avoiding collisions.\u003c\/p\u003e\n\n\u003ch3\u003eComplete Connectivity and Easy Integration\u003c\/h3\u003e\n\u003cp\u003eThe V3100 is designed for seamless integration into existing navigation systems. It features comprehensive connectivity, including an NMEA 2000 (Micro-C) port for plug-and-play installation, two NMEA 0183 ports for compatibility with older equipment, and a waterproof Mini-B USB port for configuration. Silent mode, which allows transmission to cease while continuing to receive AIS data, can be activated via an external switch or directly from a compatible Navico multifunction display over the NMEA 2000 network.\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design for the Marine Environment\u003c\/h3\u003e\n\u003cp\u003eBuilt to withstand the harshest marine conditions, the V3100's casing is IP67 certified, ensuring complete protection against dust and immersion. It operates within a temperature range of -15°C to +55°C and boasts low power consumption, typically less than 3W on average at 12V DC. The unit integrates its own 50-channel GPS receiver to provide accurate position data and connects to an external VHF antenna via a standard SO-239 connector.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723784872276,"sku":"000-14380-001","price":747.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506570457428-1000.jpg?v=1783616956"},{"product_id":"simrad-antenne-gps-gs25-nmea2000-10hz","title":"GS-25 GPS Antenna","description":"\u003cp\u003eThe Simrad GS-25 GPS antenna is a high-performance positioning receiver designed to deliver optimal accuracy on modern marine networks. With a 32-channel receiver and a 10 Hz refresh rate, it ensures rapid and smooth updates of position, speed over ground (SOG), and course over ground (COG), ideal for high-speed navigation. Unlike standard GPS antennas, the GS-25 integrates a heading sensor providing magnetic heading data with an accuracy of +\/- 3°, as well as yaw rate information (+\/- 3°) and attitude data (roll\/pitch to +\/- 1°).\u003c\/p\u003e\n\n\u003ch3\u003eNMEA 2000 Integration and Performance\u003c\/h3\u003e\n\u003cp\u003eDesigned for direct integration into an NMEA 2000 network via a Micro-C connector, this antenna stands out for its low power consumption (less than 2 W, or under 100 mA at 12 V DC) and a supply voltage tolerance of 9 to 18 V DC. With a cold acquisition time of 50 seconds and a 5-second satellite reacquisition time, it maintains a horizontal accuracy of 3 meters. While the GS-25 provides reliable heading data for radar overlay and chart orientation, Simrad recommends using a stabilized heading sensor, such as the Precision-9 compass, for more demanding applications like autopilot course-keeping in challenging conditions.\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design for Marine Environments\u003c\/h3\u003e\n\u003cp\u003eWith its compact 90 mm diameter and a weight of just 0.14 kg, the GS-25 antenna fits all mounting configurations, whether flush mount or standard pole mount. IPX7 certified, it withstands temporary immersion and operates reliably in extreme temperatures ranging from -20°C to +60°C, meeting the material requirements of the harshest marine environments.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723785265492,"sku":"000-11043-002","price":247.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_b5f31474-a654-4e74-9118-be0e515056bf.jpg?v=1776791004"},{"product_id":"simrad-b-g-unite-puissance-dd15-entrainement-direct-pilote-automatique","title":"DD15 Power Unit","description":"\u003cp\u003e\n    The \u003cstrong\u003eDD15\u003c\/strong\u003e power unit, jointly developed by B\u0026G and Simrad, is a high-performance direct-drive autopilot actuator designed for sailboats from 30 to 40 feet. This mechanical unit connects directly to the rudder stock, minimizing play and latency often found in traditional cable, chain, or hydraulic systems. With an output torque of 150 Kgm (equivalent to 150 Nm), the DD15 ensures precise and responsive rudder control, even in demanding sea conditions. Its weight is optimized at 12 kg, facilitating integration without compromising the boat's structural performance. Its compact dimensions, relative to its output power, represent a significant advantage for onboard installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced motor and clutch technology\u003c\/h3\u003e\n\u003cp\u003e\n    At the heart of the \u003cstrong\u003eDD15\u003c\/strong\u003e lies a flat-wound (pancake) electric motor, selected for its unique properties: a wide, flat rotor that guarantees high starting torque and immediate response to autopilot control signals. This motor achieves remarkable efficiency of 72.5%, surpassing the 50% maximum of conventional DC motors. This performance translates into minimal power consumption, averaging only 2 A at 12V, maximizing mechanical power output. This efficiency is critical for long passages and regattas where energy autonomy is crucial. The unit also integrates a patented electromagnetic clutch. Unlike friction clutches, this solution uses spring-loaded pins controlled by the autopilot computer, offering low friction in disengaged mode, reduced power consumption of 1.2 A at 12V when the clutch is powered (it disengages when unpowered), and no wear over time.\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem integration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eDD15\u003c\/strong\u003e is designed for seamless integration with B\u0026G and Simrad autopilot systems. It is compatible with Simrad AC10 (J3000X), AC20 (J300X), AC42N, NAC-3, and AC70 controllers, as well as B\u0026G H5000 and Triton² controllers and Simrad AP44 and AP48 control displays. This broad compatibility makes it a versatile solution for a wide range of sailboats. Installation requires mounting the RF300 rudder feedback unit provided with 10 m of cable. The direct-drive design ensures a solid and durable mechanical connection. Compared to hydraulic drives like the Simrad RPU160, the DD15 offers more direct response and superior energy efficiency for a similar sailboat size, while compared to belt or chain drives, it eliminates slipping, play, and wear issues, ensuring consistent heading accuracy. The 2025 pricing indicates the product is current and supported by the brands.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723785462100,"sku":"21119896","price":1795.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_1cabcce9-c052-4c4c-9bc8-33cba589eb67.webp?v=1779201260"},{"product_id":"simrad-combine-sans-fil-hs40-vhf-rs40-ipx7","title":"Wireless VHF RS40 headset","description":"\u003cp\u003eThe \u003cstrong\u003eSimrad HS40 wireless remote\u003c\/strong\u003e is the essential accessory for extending the controls of your Simrad RS40 or RS40-B fixed VHF. Designed to provide total mobility on board, it faithfully reproduces the display and functions of the base station, allowing you to transmit, receive, and access critical navigation data from the cockpit, flybridge, or foredeck.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-performance and secure wireless communication\u003c\/h3\u003e\n\u003cp\u003eUsing the 802.11 b\/g\/n wireless connection standard (2.4 GHz), the HS40 remote ensures a stable link with an impressive range of up to 70 meters in direct line of sight. Unlike traditional wired remotes that require complex cable routing through bulkheads, this solution offers the flexibility of a true \"Plug \u0026 Play\" secondary VHF station. It also includes a handy intercom function for direct communication with the main station inside the boat.\u003c\/p\u003e\n\n\u003ch3\u003eRobust marine design and optimized battery life\u003c\/h3\u003e\n\u003cp\u003ePerfectly suited for demanding marine environments, the remote is IPX7 waterproof certified, protecting it against temporary immersion. It is powered by an internal 3.6 V Li-ion battery with 2050 mAh capacity (5.1 Wh), ensuring long operating autonomy. Charging is intelligently handled via magnetic induction by simply placing the device on its dedicated cradle, powered from the boat’s 12 V DC system, eliminating the risk of connector oxidation.\u003c\/p\u003e\n\n\u003ch3\u003eFull control over advanced functions\u003c\/h3\u003e\n\u003cp\u003eFrom the monochrome backlit LCD screen of the remote, the user retains control over all VHF safety and navigation functions. This includes initiating Class D ASN (DSC) distress calls, managing channels, and viewing AIS targets (when paired with the RS40-B version). Its market positioning places it as a direct equivalent to the B\u0026G H60, offering the same technological reliability from the Navico group but optimized for Simrad-equipped motorboats and runabouts.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723785593172,"sku":"000-14475-001","price":206.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_4ed1b603-e0b8-4d61-9878-372d615327de.jpg?v=1779462659"},{"product_id":"simrad-compas-gnss-hs75-nmea-2000","title":"GNSS Compass HS75","description":"\u003cp\u003eThe Simrad HS75 GNSS compass is a high-precision heading and positioning sensor designed for vessels requiring reliable navigation data that is completely immune to magnetic interference. Unlike a traditional fluxgate compass, the HS75 uses a dual GNSS antenna to calculate heading with an accuracy of 0.75° RMS, while providing pitch, roll, and heave data at a 10 Hz update rate.\u003c\/p\u003e\u003ch3\u003eMulti-constellation precision and inertial sensors\u003c\/h3\u003e\u003cp\u003eThis receiver features 422 channels and decodes GPS, GLONASS, BeiDou, Galileo, and QZSS signals, paired with SBAS corrections (WAAS, EGNOS, MSAS). This redundancy ensures rapid acquisition and a heave accuracy of 30 cm. In the event of temporary satellite signal loss, the HS75 integrates a six-axis gyroscope that maintains reliable heading for up to 3 minutes, supported by an inclinometer for pitch and roll data (accuracy of 1.5° RMS).\u003c\/p\u003e\u003ch3\u003eNetwork integration and rugged design\u003c\/h3\u003e\u003cp\u003eBuilt for the harshest marine environments, its compact housing (34.8 x 15.8 x 6.5 cm, 0.75 kg) carries triple IPX6, IPX7, and IPX9 waterproof certifications. It connects directly to an NMEA 2000 network via a standard Micro-C connector. With a wide 6 to 36 V DC power range and very low power consumption of 3.2 W, it integrates seamlessly into the Navico ecosystem (Simrad, B\u0026G, Lowrance). It positions itself as a direct competitor to the Garmin MSC 10, offering professional-grade performance for high-speed powerboats and commercial vessels.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723785789780,"sku":"000-16143-001","price":2017.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_77c040ae-f9d3-479a-b138-a6d6d9e1ad7e.jpg?v=1779437613"},{"product_id":"simrad-radar-halo20","title":"HALO20 Radar","description":"\u003cp\u003e\n    Designed for small sports boats and dayboats, the \u003cstrong\u003eSIMRAD HALO20\u003c\/strong\u003e radar (part number 000-14537-001) is a compact detection solution using pulse compression technology. This 20-inch radome (510 mm diameter x 223 mm height) provides a maximum range of 24 nautical miles and a minimum range of 50 meters, ensuring precise target detection with minimal footprint.\n\u003c\/p\u003e\n\n\u003ch3\u003ePulse compression technology and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO20 features pulse compression technology, combining short- and long-range detection with sharp target definition. Its peak transmitter output power is 25 W, operating in the X-band (9.4 to 9.5 GHz). Unlike traditional magnetron radars, it uses InstantOn™ technology, enabling immediate activation from low-power standby mode (3.9 W standard at 13.8 V DC). In operation, power consumption ranges from 17 to 29 W depending on range and mode. The antenna rotation speed is 24 RPM, with a nominal horizontal beam width of 3.9° (at -3 dB).\n\u003c\/p\u003e\n\n\u003ch3\u003eOperating modes and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO20 radar offers dedicated modes for simplified use: Harbour (harbor), Offshore, and Weather, optimizing signal processing for different conditions. It also includes MARPA target tracking, capable of monitoring up to 10 collision threats. Its 100Base-T Ethernet interface allows easy integration with compatible navigation systems. With IPX6 waterproofing and an operating temperature range of -25 °C to +55 °C, it is built to withstand marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning within the SIMRAD HALO range\u003c\/h3\u003e\n\u003cp\u003e\n    The SIMRAD HALO20 is positioned as the entry-level option in the HALO series, delivering solid-state technology benefits in a compact format. Compared to the HALO20+ or HALO24, it offers a public safety distance of 0.0 meters, which is an advantage for installation on smaller vessels where space is limited. For example, the HALO24 has a maximum allowable antenna gain of 23.5 dBi compared to 22.5 dBi for the HALO20, indicating slightly superior performance for the more advanced models in the range.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723786576212,"sku":"000-14537-001","price":1867.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c266f0fc-a557-4081-bb22-afcba5db0cb5.jpg?v=1779462686"},{"product_id":"simrad-traceur-nsx-3012-12-pouces-chirp-nmea2000","title":"NSX 3012 12\" Chartplotter","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad NSX 3012\u003c\/strong\u003e (part number 000-15223-001) is a 12-inch touchscreen multifunction display designed for powerboat navigation and autopilot control. This chartplotter features an IPS panel with wide viewing angles, even when wearing polarized sunglasses. Built for harsh marine environments, the unit is rated to IPX6 and IPX7 waterproof standards, protecting against high-pressure water jets and temporary immersion. Its net weight is 2.2 kg (4 kg with packaging), and it requires a standard 12V DC power supply.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and interfaces\u003c\/h3\u003e\n\u003cp\u003e\n    This model centralizes onboard data through a complete network architecture. The system is built around an NMEA 2000 port (Micro-C connector) for linking to instrumentation, engine data, tank level sensors, and compatible autopilots. Wireless connectivity is provided by integrated Wi-Fi and Bluetooth modules for firmware updates via the Simrad companion app and route synchronization. The unit also includes USB ports and a MicroSD card reader for chart management and navigation data export.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and technical comparison\u003c\/h3\u003e\n\u003cp\u003e\n    Within the \u003cstrong\u003eSimrad\u003c\/strong\u003e lineup, the NSX 3012 chartplotter replaces the Simrad GO12 series. Unlike the GO range, the NSX runs a new operating system with faster response times and an initial setup assistant. Compared to the higher-end Simrad NSS evo3S 12-inch model, the NSX opts for a fully touch-based interface and streamlined architecture, whereas the NSS retains a hybrid interface (touch and rotary knob) along with more complex fishfinder modules for offshore fishing. Against a direct competitor like the Garmin GPSMAP 1223, the NSX 3012 distinguishes itself with a mapping engine exclusively optimized for C-MAP Discover X and Reveal X charts, requiring these specific formats to utilize terrain shading and high-resolution bathymetry.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723786936660,"sku":"000-15223-001","price":2230.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_4348ba3e-067c-47fd-9c38-0f6ddfd06bb2.png?v=1779437303"},{"product_id":"simrad-cable-h2000-10m-fastnet","title":"10m H2000 Fastnet Cable","description":"\u003cp\u003e\u003cstrong\u003eH2000 10m Fastnet cable\u003c\/strong\u003e is a marine bus cable designed for linking marine bus or instrument networks. It can be used to extend an existing installation or replace a worn cable while maintaining a reference compatible with marine electronics.\u003c\/p\u003e\n\u003cp\u003eThis sheet belongs to the NMEA Networks \/ marine bus family. Specified length: 10 m. Signal or protocol: Fastnet. Compatibility must be confirmed with the exact Navico \/ Simrad \/ B\u0026G equipment before ordering.\u003c\/p\u003e\n\u003cp\u003eFor reliable installation, follow the bus topology, terminations, and power supplies specified by the manufacturer. Also check the bus standard, connector type, and total backbone length before sealing cable passes.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723824849236,"sku":"135-0A-130","price":26.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_23bc9c90-a200-4e7a-b48a-01023c0d4231.jpg?v=1772643071"},{"product_id":"bg-licence-radar-overlap-adrena-ll1-v20","title":"Adrena LL1 radar overlay licence","description":"\u003cp\u003eThe B\u0026amp;G Adrena LL1 radar overlap license is a software activation key specifically designed for demanding navigators and offshore racing professionals. It allows for the real-time integration and overlay of your B\u0026amp;G or Simrad radar's raw image directly onto the chart interface of the Adrena V20 navigation software. This data fusion provides optimal situational awareness by combining charts, AIS targets, and radar echoes on a single screen.\u003c\/p\u003e\n\u003ch3\u003eTactical Integration and Performance Analysis\u003c\/h3\u003e\n\u003cp\u003eFor a racing navigator, the ability to visualize squalls, wind shifts, or competitors without AIS transponders directly on the tactical chart provides a decisive strategic advantage. The LL1 license centralizes critical information on the onboard computer, eliminating the need to scrutinize a separate multifunction display. Unlike integrated systems from competing brands like Garmin or Raymarine that often favor a closed ecosystem, this solution unlocks the potential of B\u0026amp;G radars by pairing them with the most advanced routing software on the market.\u003c\/p\u003e\n\u003ch3\u003eNetwork Configuration and Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis software key is exclusively compatible with Adrena V20. Its activation requires the B\u0026amp;G radar dome or scanner to be properly interfaced via the onboard Ethernet network with the computer running Adrena software. This is a dematerialized product, ensuring instant update of your navigation system's capabilities without adding physical hardware.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":54023357530452,"sku":"000-10173-001","price":1395.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15044009001300-1000.jpg?v=1783618233"},{"product_id":"simrad-sd80-solenoid-drive-module","title":"Solenoid Drive Module SD80","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad SD80 Solenoid Drive Module\u003c\/strong\u003e is a critical component designed for integration within Simrad autopilot systems. This module acts as a key interface between the autopilot computer and solenoid-based steering systems, whether hydraulic or mechanical. It is specifically engineered to ensure precise and reliable control of steering actuators, guaranteeing smooth and responsive heading commands.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Functionality\u003c\/h3\u003e\n\u003cp\u003e\n    The SD80 module is a technical solution dedicated to controlling solenoid valves. It enables the Simrad autopilot to convert navigation signals into physical movements of the rudder, ensuring stable and efficient course-keeping. Unlike reversible pump drive modules, the SD80 is optimized for setups requiring solenoids, offering extended compatibility with various existing steering systems on the market, provided they operate via solenoids.\n\u003c\/p\u003e\n\n\u003ch3\u003ePosition in the Simrad Range\u003c\/h3\u003e\n\u003cp\u003e\n    This module serves as a cornerstone for Simrad autopilot installations requiring this specific control method. While other Simrad systems, such as NAC-2 or NAC-3 pilots, include outputs for reversible pumps, the SD80 targets configurations where solenoids are the preferred control method, providing installation flexibility for a wide range of vessels. It complements Simrad computers, allowing autopilot systems to adapt to varied steering infrastructures without compromising precision or responsiveness.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":55917306904916,"sku":"000-10192-001","price":884.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15466828923220-1000.jpg?v=1783618620"},{"product_id":"simrad-kit-montage-fu-qs-nf80-bulkhead","title":"Simrad FU\/QS\/NF80 bulkhead mounting kit","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad FU\/QS\/NF80 bulkhead mounting kit\u003c\/strong\u003e (part number 000-10589-001) is an essential accessory designed for the secure and durable integration of Simrad FU80, QS80, and NF80 control units on any dashboard or bulkhead. This kit ensures precise mechanical mounting, critical for maintaining the operational integrity of these devices in demanding marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Functionality\u003c\/h3\u003e\n\u003cp\u003e\n    Specifically developed by Simrad, this kit provides installation compliant with professional standards, protecting control units from excessive vibrations and shocks inherent to sailing. Correct installation is crucial for the long-term reliability of autopilot and helm systems associated with FU80, QS80, and NF80 controllers. Unlike generic mounting solutions, this Simrad kit is optimized for a perfect fit, eliminating play and mechanical stress that could compromise performance or equipment lifespan.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimrad System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This mounting kit aligns with Simrad’s philosophy of equipment integration, where each component is designed to function in perfect synergy. For users of Simrad FU80, QS80, and NF80 controller ranges, using this kit is recommended to ensure robust installation and optimal accessibility. It supports the performance of navigation and autopilot systems, such as those in the Simrad AP series, by ensuring user interfaces remain stable and responsive regardless of sea conditions. This positioning as a dedicated accessory distinguishes it from non-specific solutions offered by other brands, which may not provide the same guarantee of compatibility and marine resistance.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":55917307396436,"sku":"000-10589-001","price":122.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/simrad-fu-qs-nf80-bulkhead-kit-de-montage_000-10589-001-01.png?v=1779436706"},{"product_id":"simrad-rs20s-radio-vhf-marine-asn","title":"RS20S Marine VHF Radio with DSC","description":"\u003cp\u003e\n    Designed for communication and safety at sea, the Simrad RS20S fixed VHF radio (also designated Link-6S) is a Class D DSC marine communication solution with built-in GPS. It ensures reliable communication and precise location in emergencies.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and technical features\u003c\/h3\u003e\n\u003cp\u003e\n    The Simrad RS20S offers selectable transmit power of 25 W or 1 W, with current consumption of ≤ 6 A at 25 W and ≤ 1.5 A at 1 W under 12 V DC. The radio covers international, US, and Canadian channels, as well as country-specific weather channels. Its 42 x 34 mm (1.65\" x 1.3\") FSTN LCD screen features contrast control and backlighting for optimal visibility in varying light conditions. Frequency stability is ±5 ppm, with 25 kHz channel spacing. Audio output power is 2 W with 10 % distortion for an 8 ohm speaker. An external speaker can be connected for improved audibility.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The RS20S integrates a GPS receiver with an internal antenna and an SMA female connector for an optional external GPS antenna. This feature ensures autonomous position for DSC distress calls, even without connection to other onboard GPS equipment. It features an NMEA 0183 port for input (supporting RMC, GGA, GLL, GNS sentences) and output (DSC for DSC calls, DSE for advanced position information), enabling integration with other compatible navigation systems. The RS20S also supports NMEA 2000 connectivity in addition to NMEA 0183, allowing flexible integration with other compatible navigation systems. The device is CE certified (RED 2014\/53\/EU) and waterproof to IPx7 standards.\n\u003c\/p\u003e\n\u003ch3\u003eSafety and use\u003c\/h3\u003e\n\u003cp\u003e\n    The Class D DSC functionality with dual receiver (individual CH70) ensures priority for distress calls. The radio includes features such as triple watch (Tri Watch), favorite channel scanning (My Channels), and full scanning (All Scan). It also allows tracking up to 5 contacts (Track your Buddy) via automatic position requests. The MMSI and name directory can store 20 numbers and groups, and call logs retain 20 individual calls and 10 distress calls. The unit weighs 1.18 kg and can be mounted on a bracket or flush-mounted, offering installation flexibility. Its dimensions are L=166.7 mm × H=89.2 mm × D=161.4 mm without the bracket, and its safe compass distance is 0.5 m.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":55917314900308,"sku":"000-14491-001","price":324.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15466830889300-1000.jpg?v=1783618681"},{"product_id":"simrad-nsx-3007-traceur-de-cartes-gps-7-pouces","title":"NSX 3007 Without transducer.","description":"\u003cp\u003e\n    Designed for a modern and intuitive navigation experience, the Simrad NSX 3007 chartplotter is a 7-inch multifunction display for recreational boaters and anglers. It serves as a compact solution within Simrad’s NSX range, offering a streamlined user interface and extended integration capabilities comparable to larger displays in the series, but in a format suited to consoles where space is limited.\n\u003c\/p\u003e\n\u003ch3\u003eDisplay and GPS Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The NSX 3007 features a 7-inch SolarMAX™ IPS HD touchscreen with a resolution of 1024 x 600 pixels. The display provides 85° viewing angles in all directions and brightness exceeding 1200 nits, ensuring optimal visibility even in bright sunlight and with polarized lenses. For positioning, an internal 10Hz GPS receiver delivers fast updates and 3-meter (9.8 ft) horizontal accuracy, supporting WAAS, MSAS, EGNOS, and GLONASS systems.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This chartplotter operates on 12 V DC (10–17 V DC) with a maximum power draw of 29.7 W (2150 mA at 13.8 V). It includes Wi-Fi and Bluetooth connectivity. Wired connectivity is provided via an Ethernet port and an NMEA 2000® Micro-C port, enabling seamless integration with HALO® radars, Simrad® autopilots, and third-party systems such as Mercury® (SmartCraft® Connect, VesselView®), CZone®, OmniSense, Dometic, and Lumishore. The NSX 3007 also supports IP video integration. Note that this model is supplied without a transducer, leaving the choice of sonar technology to the user.\n\u003c\/p\u003e\n\u003ch3\u003eChartplotting and Sonar\u003c\/h3\u003e\n\u003cp\u003e\n    The NSX 3007 supports optimized C-MAP® DISCOVER™ X and C-MAP REVEAL™ X marine charts, offering intuitive presentation, daily updates, customizable depth shading, and high-resolution bathymetry with 1-foot contour lines. Features include faster Autorouting and a chart inspection function for quick access to point-of-interest data. While the transducer is not included, the NSX 3007 is compatible with Active Imaging™ technology (CHIRP, SideScan, DownScan Imaging™) and FishReveal™, and can handle transducers up to 1kW for enhanced deep-penetration performance. A MicroSD slot is available for chart storage, and the unit can store 6,000 waypoints, 500 routes with a maximum of 100 waypoints per route, and 50 tracks with up to 12,000 track points.","brand":"Simrad","offers":[{"title":"Default Title","offer_id":55917396492628,"sku":"000-15215-001","price":835.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15466849501524-1000.jpg?v=1783618719"},{"product_id":"simrad-ap44-commande-pilote-automatique-nmea2000","title":"AP44 autopilot control unit order","description":"\u003cp\u003e\n    The Simrad AP44 autopilot control unit (part number 000-13289-001) is a dedicated control unit designed to provide precise navigation and an intuitive user interface. Integrating Simrad Continuum™ steering technology, it enables reliable and high-performance autopilot operation. This unit features a 4.1-inch optically bonded color display with 320 x 240 pixel resolution and 600 nits brightness, ensuring optimal visibility under various lighting conditions thanks to its transflective LCD technology.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Weighing 0.32 kg and with compact dimensions of 118 x 115 x 48.5 mm (or 118 x 115 x 28 mm depending on sources), the AP44 has a modern low-profile \"glass helm\" design that facilitates aesthetic integration into contemporary dashboards. Its IPx7 waterproof rating ensures resistance to marine environments. The unit is powered by 12 V DC with a typical power consumption of 1.35 W (max 1.8 W) and operates within a temperature range of -25°C to +65°C. Certified NMEA 2000® connectivity (1 Micro-C port, 3 LEN, network load of 3 LEN) ensures seamless integration with existing Simrad navigation systems, including NAC-2 and NAC-3 autopilot computers.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced autopilot features\u003c\/h3\u003e\n\u003cp\u003e\n    The AP44 interface includes four buttons and a rotary knob with press-to-validate function, enabling quick and precise heading adjustments. It offers various autopilot modes, including heading hold, No Drift mode (to counteract wind and current effects via GPS), waypoint navigation (NAV), wind mode, and Power Steer FU assisted steering. Automated turning patterns are also available for specific maneuvers. Compared to control via a multifunction display, the AP44 provides direct tactile feedback and physical controls that may be preferred in rough sea conditions or during maneuvers requiring immediate responsiveness. Installation is simplified by self-calibration and tuning functions, including automatic compass calibration with a Simrad Precision-9 compass.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":55920730243412,"sku":"000-13289-001","price":477.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15467528421716-1000.jpg?v=1783618820"},{"product_id":"simrad-halo-200x-radar-piedestal-electronique-marine","title":"Simrad HALO 200X radar pedestal only","description":"\u003cp\u003e\n    Designed for coastal and offshore navigation, the \u003cstrong\u003eSimrad HALO 200X Radar Pedestal Only\u003c\/strong\u003e is a 50 W pulse-compression radar system offering performance equivalent to a 12 kW magnetron radar. This unit is intended to be paired with a compatible HALO array antenna, providing clear target detection at ranges from 6 meters to 72 nautical miles.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Technology for Situational Awareness\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO 200X integrates solid-state technology with beam sharpening for improved target separation. It allows simultaneous dual-range operation, useful for monitoring distant weather cells while detecting buoys and other vessels at short range. Its preset operational modes, such as Harbor, Offshore, Weather, and Bird, automatically adjust radar settings for optimal imaging without manual intervention. Rotation speed is adjustable from 16 to 48 RPM depending on the mode.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and Fishing Features\u003c\/h3\u003e\n\u003cp\u003e\n    This Simrad radar pedestal offers advanced safety assistance functions. The VelocityTrack™ Doppler technology uses color coding to indicate target movement direction, facilitating collision threat identification. The system includes dangerous target alerts and the ZoneTrack™ function, allowing tracking of up to 50 targets within two user-defined zones. For fishermen, the Bird Finder mode can detect diving birds, indicators of fish schools, up to six nautical miles away. Compatibility is ensured with Simrad multifunction displays NSS, NSX, NSO, and GO.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":55920769368404,"sku":"000-15762-001","price":4601.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/simrad-halo-200x-radar-pedestal-only_000-15762-001-01.jpg?v=1779463061"},{"product_id":"simrad-si80-signal-interface-pcb","title":"Signal interface board SI80","description":"\u003cp\u003e\nThe \u003cstrong\u003eSimrad SI80\u003c\/strong\u003e signal interface card is a genuine Navico service part designed for Simrad commercial autopilot systems in the AP50, AP60, AP70, and AP80 families. It provides the NMEA 0183 interface between external sensors and the autopilot computer, as well as power and termination for the embedded SimNet \/ NMEA 2000 network.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical role\u003c\/h3\u003e\n\u003cp\u003e\nThe SI80 provides four bidirectional NMEA 0183 ports (RX\/TX) (IEC 61162-1) for connecting external sensors to the Simrad system: satellite compass, GPS, anemometer, depth sounder, AIS, etc. It also integrates a 12 V power supply and termination for the onboard NMEA 2000 \/ SimNet data network, eliminating the need for a separate module.\n\u003c\/p\u003e\n\n\u003ch3\u003eMain specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 NMEA 0183 RX\/TX ports (IEC 61162-1)\u003c\/li\u003e\n\u003cli\u003e12–24 V DC input power\u003c\/li\u003e\n\u003cli\u003eIntegrated 12 V NMEA 2000 \/ SimNet network output with termination\u003c\/li\u003e\n\u003cli\u003ePCB-only format, to be inserted into the SI80 module (complete module reference 000-10425-001)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\nSimrad commercial autopilot systems AP50, AP60, AP70, and AP80; AC70, AC80, AC85 computers. Designed for drop-in replacement on existing installations.\n\u003c\/p\u003e\n\n\u003ch3\u003eFormer Simrad \/ Robertson reference\u003c\/h3\u003e\n\u003cp\u003e\n\u003cstrong\u003e051-3458-00\u003c\/strong\u003e — legacy reference used before Simrad commercial range was integrated into the Navico nomenclature.\n\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eGenuine Navico part, new, covered by manufacturer warranty. Non-stock item; quote request or order via your Skysat Pro account.\u003c\/em\u003e\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":55920949428564,"sku":"000-10588-001","price":866.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15467575738708-1000.jpg?v=1783618862"},{"product_id":"simrad-radar-12kw-xband-r5000-pedestal","title":"Radar pedestal LAN X-band 12 kW Simrad SRT (R5000)","description":"\u003cp\u003e\n    Designed for high-quality commercial marine radar solutions, the Simrad 12kW X-Band SRT LAN radar pedestal (R5000) is a central component of the Simrad R5000 radar series. This pedestal delivers 12 kW output power in the X-band, operating at a frequency of 9410 ± 30 MHz, and is specifically developed for SOLAS Category 1 and 2 vessels, including high-speed craft (HSC), with the required IMO and U.S. Coast Guard certifications (ARPA, ATA, EPA).\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Performance and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The R5000 pedestal is available as a transceiver at the masthead, simplifying installation and reducing cabling costs. It is compatible with open-array antennas of 6, 9, and 12 feet. Its detection capabilities are characterized by short (80 ns), medium (250 ns), and long (800 ns) pulse lengths, with a pulse repetition frequency (PRF) of 3000 Hz for short pulses. It ensures a minimum range of less than 40 meters and a range discrimination of less than 40 meters, guaranteeing clear imagery even at close range.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    Connectivity to the radar processor is via a thin, easy-to-route Ethernet cable, supporting lengths up to 65 meters. The R5000 system features a modular \"plug \u0026 play\" design enabling scalable installation for single or multi-radar configurations. It can manage up to four radar sensors, four master\/slave displays, and an unlimited number of \"clone\" stations on the network, providing operational flexibility and redundancy. Advanced digital signal processing contributes to superior target detection. For operation in extreme environments, the system can be equipped with antenna group heaters to function down to -40°C. The target tracking capability allows for the instantaneous display of 100 radar targets and background tracking of 2,500 targets. Compared to Simrad’s Halo series recreational radars, the R5000 targets the professional segment with distinct performance and certification requirements for commercial and offshore navigation.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":55920952869204,"sku":"000-14939-001","price":7789.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/manual-web-pedestal-radar-lan-srt-bande-x-12-kw-r5000_000-14939-001-01.webp?v=1779465176"},{"product_id":"simrad-carte-commande-analogique-ad80-pilote-automatique","title":"AD80 Analog Control Board","description":"\u003cp\u003e\n    The \u003cstrong\u003eSIMRAD AD80 analog control card\u003c\/strong\u003e is a key component for marine autopilot systems. Designed for integration with Simrad AP70 and AP80 autopilot systems, as well as Simrad Pro configurations with the AC85 computer, it provides precise analog or proportional control of a vessel’s rudder or thruster.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced control and feedback\u003c\/h3\u003e\n\u003cp\u003e\n    The AD80 enables control via analog voltage or low-level current for angular and proportional steering. It supports multiple feedback types, including frequency, voltage, or current for angle feedback. This versatility ensures compatibility with various steering configurations and precise heading management.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and interfaces\u003c\/h3\u003e\n\u003cp\u003e\n    This card features outputs such as « UI CRTL » for low-voltage analog current commands and « READY » for a contact signal indicating its operational status. Inputs include « RUD UI » for analog rudder feedback (voltage or current), « RUD FRQ » for rudder feedback via frequency, and « MODE » for an external mode selector. Generic link establishment signals « HS1 » and « HS2 » are also present. Connection to the network is via SIMNET for the CAN network, and an isolated 4-20mA analog output is available. The system uses a Micro-C CAN bus for integration, requiring Micro-C cables and terminations.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and performance\u003c\/h3\u003e\n\u003cp\u003e\n    Mounted in a bulkhead, the \u003cstrong\u003eSIMRAD AD80 analog control card\u003c\/strong\u003e is built to withstand marine environments. It operates within a temperature range of -15°C to +55°C and can be stored from -30°C to +70°C. Weighing approximately 0.5 kg, it includes an NMEA 2000 load equivalence number (LEN) of 2. The AD80 is recognized for its ability to maintain precise heading and provide smooth, accurate steering, converting autopilot commands into stable analog signals for rudder or thruster heading control.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56021156135252,"sku":"000-10586-001","price":821.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/000-10586-001_1.jpg?v=1780569916"},{"product_id":"simrad-carte-commande-solenoide-sd80-pilote-automatique","title":"Solenoid drive PCB SD80","description":"\u003cp\u003e\nThe \u003cstrong\u003eSimrad SD80\u003c\/strong\u003e solenoid drive PCB is an original Navico service part designed for the Simrad commercial autopilot systems in the AP50, AP60, AP70 and AP80 families. It controls hydraulic actuators for rudder and bow thruster via their solenoid valves, with galvanic isolation.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical role\u003c\/h3\u003e\n\u003cp\u003e\nThe SD80 provides the power and logic required to drive the solenoid valves of a hydraulic rudder or bow thruster actuator. It supports on\/off and proportional control modes, with galvanically isolated output to protect the computer. The PCB also manages rudder angle feedback returns (frequency, voltage or current) and digital handshake with the drive.\n\u003c\/p\u003e\n\n\u003ch3\u003eMain specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGalvanically isolated solenoid output, up to 10 A\u003c\/li\u003e\n\u003cli\u003eOn\/off or proportional control (rudder or thruster)\u003c\/li\u003e\n\u003cli\u003eFeedback inputs: rudder angle frequency, voltage or current\u003c\/li\u003e\n\u003cli\u003eDigital handshake with drive and external mode input\u003c\/li\u003e\n\u003cli\u003ePCB-only format, to be inserted into the SD80 module (complete module reference 000-10192-001)\u003c\/li\u003e\n\u003cli\u003eWeight ≈ 0.75 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\nSimrad commercial autopilot systems AP50, AP60, AP70 and AP80, as well as the AC85 computer. Designed for direct replacement in existing installations.\n\u003c\/p\u003e\n\n\u003ch3\u003e⚠️ Navico status — end of production\u003c\/h3\u003e\n\u003cp\u003e\nThis reference \u003cstrong\u003e000-10587-001\u003c\/strong\u003e is now classified as \u003cstrong\u003eDiscontinued\u003c\/strong\u003e by Navico — production has ceased and only residual stock is available. If you have a foreseeable maintenance project on an AP50\/AP60\/AP70\/AP80 equipped with an SD80, we recommend anticipating procurement before definitive depletion.\n\u003c\/p\u003e\n\n\u003ch3\u003eFormer Simrad \/ Robertson reference\u003c\/h3\u003e\n\u003cp\u003e\n\u003cstrong\u003e051-3460-00\u003c\/strong\u003e — historical reference in force before the integration of the Simrad commercial range into the Navico nomenclature.\n\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eOriginal Navico part (genuine), new, covered by manufacturer warranty. Product out of standard stock, quote request or via your Skysat Pro account.\u003c\/em\u003e\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56021156331860,"sku":"000-10587-001","price":839.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/000-10587-001_1.jpg?v=1780569927"},{"product_id":"simrad-nac-3-vrf-pilote-automatique-core-pack","title":"NAC-3 VRF Autopilot Core pack","description":"\u003cp\u003e\n    The Simrad NAC-3 VRF autopilot pack is a solution designed for navigation on larger boats, including outboard and inboard\/outboard motor vessels over 10 meters (35 feet). It includes the NAC-3 autopilot computer, a Precision-9 solid-state compass, and the NMEA 2000® cabling and connectors required for network integration. This system is the core of a complete autopilot setup, requiring the addition of a control unit and a power unit.\n\u003c\/p\u003e\n\n\u003ch3\u003eVRF Technology and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Virtual Rudder Feedback (VRF) technology eliminates the need for a mechanical rudder feedback unit on boats equipped with outboard and inboard\/outboard motors, simplifying installation without compromising steering accuracy. The NAC-3 computer is compatible with various power units, including Simrad RPU160 and RPU300 high-current hydraulic pumps, mechanical transmissions such as the Simrad DD15, HLD2000 series linear hydraulic rams, and solenoid valves. The Precision-9 compass provides heading, rate of turn, pitch, and roll data via the NMEA 2000® network.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The NAC-3 is rated for continuous loads of 30 amps and peak loads of 50 amps for 1 second for reversible helm motor control. The clutch output supports a maximum of 3 amps, and the solenoid control operates at 12\/24V DC with a load range from 10mA to 10A. The system is powered by 12\/24V DC and operates within a temperature range of -25°C to +55°C. It features IPX5 water protection and complies with EN60945 standards for shock and vibration. Connectivity includes a Micro-C NMEA 2000® port (1 LEN) and an NMEA 0183® IN\/OUT port with baud rates of 4.8, 9.6, 19.2, and 38.4 kbaud. The system integrates Simrad Continuum steering technology, auto-tuning, and automatic compass calibration for simplified setup and improved heading accuracy. Control can be performed via dedicated units such as the AP44, IS42 displays, OP12 keypads, networked multifunction displays, or the Simrad WR10 wireless remote.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56047633531220,"sku":"000-13338-001","price":1721.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/simrad-nac-3-vrf-autopilot-core-pack_000-13338-001-01.jpg?v=1780870209"},{"product_id":"simrad-lfi3000mk2-linear-feedback-interface-nmea2000","title":"Simrad LFI3000MK2 Linear Feedback Interface","description":"\u003cp\u003e\n    Designed to modernize existing navigation systems, the \u003cstrong\u003eSimrad LFI3000MK2 Linear Feedback Interface\u003c\/strong\u003e converts analog rudder position data into an NMEA 2000 format. This interface is a solution for refit projects, allowing the retention of existing analog rudder feedback units, such as the Simrad LF3000, when upgrading to a contemporary NMEA 2000 autopilot system like the Simrad NAC series.\n\u003c\/p\u003e\n\n\u003ch3\u003eNMEA 2000 Conversion and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSimrad LFI3000MK2\u003c\/strong\u003e is an active interface that takes an analog electrical signal from a linear feedback unit and converts it into NMEA 2000 data. This functionality ensures that rudder angle information is broadcast across the NMEA 2000 network, making it visible on connected multifunction displays (MFD) and autopilots. The system is compatible with Simrad autopilot computers, including the NAC series, and offers immediate recognition for simplified installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Powered via the NMEA 2000 bus, the \u003cstrong\u003eLFI3000MK2\u003c\/strong\u003e interface has a power consumption of 0.9 watts. It is protected against the marine environment with an IP56 rating and is constructed in black ABS for durability. Its weight is 0.7 kg, including cable. It operates within a temperature range of 0 to +70°C and can be stored from -30 to +80°C. Installation can be performed on the deck or a bulkhead. The output signal features a polarity-independent variable frequency with a resolution of 3400Hz at center, ±10Hz\/degree, equivalent to a 1.7 mm travel. Linearity is ±3 degrees up to 45 degrees of rudder angle. The device is supplied with a 1.5 m shielded TP cable. Rudder feedback calibration is automatically set during the autopilot configuration process.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56047703261524,"sku":"20188082","price":141.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/simrad-lfi3000mk2-linear-feedback-interface_20188082-01.jpg?v=1780872966"},{"product_id":"simrad-psu-r5000-unite-alimentation-radar","title":"PSU R5000 Power Supply Unit","description":"\u003cp\u003e\n    The \u003cstrong\u003eSIMRAD PSU R5000\u003c\/strong\u003e power supply unit (reference 000-13225-001) is a critical component of the Simrad R5000 professional radar system. Designed to deliver stable, dedicated power, it ensures optimal operation of the entire radar installation, including the radar antenna and control units.\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecific Power Supply and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This power supply unit handles 110\/230 V AC inputs (50\/60 Hz) and provides multiple dedicated DC outputs: a 52 V DC output with 400 W power for the radar antenna, and two 24 V DC outputs with 80 W each for the R5000 processor, M5000 display, and O2000 controller. This configuration ensures power distribution tailored to the precise requirements of each R5000 system component, unlike generic power supplies that cannot provide these specific voltages. It is also compatible with HALO 5000 solid-state radars, highlighting its central role in the Simrad modular architecture.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Marine Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    With an operating temperature range of -15° C to 55° C and storage range of -20° C to 60° C, the PSU R5000 is built for demanding marine environments. Its IPx2 rating indicates resistance to water droplets for installation in protected environments. The unit complies with RMRS shock testing rules (2-020101-040-E Vol 2) and IEC60945 ed. 4.0 vibration requirements. It also meets European Council Directive 2014\/90\/EU on marine equipment, ensuring reliability and durability in professional applications. The unit weighs 5 kg and includes a DLY 10 A, 250 V fuse (5x20 mm), with a green constant LED for normal operation and a red LED for power status.","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56048811278676,"sku":"000-13225-001","price":1479.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_851a5079-c160-4e7a-a642-a91e680941ee.webp?v=1780907991"},{"product_id":"simrad-autopilot-gateway-volvo-evc-ips","title":"AUTOPILOT GATEWAY FOR VOLVO","description":"\u003cp\u003e\n    Designed specifically for integrating Volvo Penta EVC and IPS steering systems, the \u003cstrong\u003eSimrad AUTOPILOT GATEWAY FOR VOLVO\u003c\/strong\u003e gateway (part number 000-15597-002) is an interface that enables Simrad autopilot systems, such as the NAC-D, SG05, AP24, and AP28 processors, to communicate with engine controls. This device ensures digital data transmission and power distribution within the autopilot system and with other Simrad Yachting products.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Key Features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAUTOPILOT GATEWAY FOR VOLVO\u003c\/strong\u003e acts as a steering computer. It is approved by Volvo Penta, guaranteeing compatibility and optimal operation with their EVC\/IPS systems. The module supports high-speed data transfer for integrated steering and navigation systems. It features two SimNet ports for proprietary network communication, with a SimNet network load (NL) factor of 2.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical and Environmental Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This gateway is powered at 12V via SimNet and has a power consumption of 0.9W. Its IP44 rating ensures resistance to water spray, making it suitable for mounting in a bulkhead onboard. The device is compatible with the NMEA 2000 network and weighs approximately 0.59 kg. It is required for connecting Simrad autopilot processors (NAC-D or SG05) to Volvo EVC and IPS controls, replacing the previous model 000-15597-001. Note that this product is a discontinued reference with potentially limited availability.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049687232852,"sku":"000-15597-002","price":2675.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/web-autopilot-gateway-for-volvo_000-15597-002-01.jpg?v=1780914999"},{"product_id":"simrad-steadysteer-flow-switch-pilote-automatique-hydraulique","title":"SteadySteer Flow Switch","description":"\u003cp\u003e\n    Designed to optimize the sailing experience, the \u003cstrong\u003eSimrad SteadySteer Flow Switch (000-15734-001)\u003c\/strong\u003e is a hydraulic steering component that enhances autopilot systems. It allows manual control of the vessel during turns without disengaging the autopilot, then automatically re-engages once a new heading is established. This feature ensures a smooth transition between manual and automatic steering, reducing distractions and simplifying heading adjustments.\n\u003c\/p\u003e\n\n\u003ch3\u003eKey Features of the SteadySteer Flow Switch\u003c\/h3\u003e\n\u003cp\u003e\n    The SteadySteer device enables automatic disengagement of the autopilot when manually intervening on the helm during a turn. Once the vessel stabilizes on a new heading, the autopilot automatically re-engages without requiring user input. This automation provides a smoother steering experience and intuitive boat control. Manoeuvres are simplified, with no alarms or button presses needed to change heading—simply turn the helm.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSteadySteer Flow Switch\u003c\/strong\u003e is compatible with Simrad autopilot computers NAC-2 and NAC-3 (from software version 1.1.01.00). It also works with control units AP44, IS42, and AP48 (from software version 57.3.163), as well as Simrad multifunction displays running software version 20.2 or later. This system is specifically designed for vessels with hydraulic steering systems and is compatible with RPU-series pumps. It is not compatible with newer \"PUMP-\" Canadian Metal autopilot pumps.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049906516308,"sku":"000-15734-001","price":374.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495237271892-1000.jpg?v=1783619885"},{"product_id":"simrad-halo-500x-radar-pedestal-compression-impulsion","title":"PEDESTAL, RADAR, HALO 500X","description":"\u003cp\u003e\n    Designed for the demands of modern sailing, the Simrad HALO 500X radar pedestal (000-15742-001) is a cutting-edge solution for target detection and situational awareness at sea. This unit integrates a 130 W solid-state pulse-compression radar technology, providing high resolution and detection of close-range targets down to 6 metres, while delivering long-range performance comparable to HALO 3000 systems, reaching up to 96 nautical miles.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Radar Technology\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO 500X uses solid-state pulse-compression technology, eliminating the need for a magnetron and reducing maintenance requirements, ensuring increased reliability and extended service life. The Beam Sharpening feature enhances target separation, producing a clearer radar image. The system supports Dual Range operation, allowing simultaneous monitoring of two different ranges for enhanced situational awareness. Antenna rotation speed is variable from 16 to 48 RPM, with a high-speed mode providing rapid updates up to 48 RPM, even in 80-knot winds. The InstantOn™ function ensures immediate availability from standby mode, a critical feature for collision avoidance.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntelligent Target Detection and Tracking\u003c\/h3\u003e\n\u003cp\u003e\n    This radar pedestal integrates advanced target tracking capabilities, including MARPA (Mini Automatic Radar Plotting Aid) to track up to 10 targets (20 in dual-range mode) and AutoTrack™ for automated detection, tracking, and prioritization of up to 50 targets, with instant alerts for potential hazards. The VelocityTrack™ Doppler technology instantly identifies and analyses the relative movement of radar targets, highlighting collision threats. Predefined user modes such as Port, Offshore, Weather, and Bird Detection automatically optimize radar parameters for specific conditions, enabling detection of diving birds within a six-nautical-mile radius.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO 500X pedestal is designed to be compatible with 3-, 4-, or 6-foot open-array antennas and fully integrates with existing Simrad Pro marine systems via its RI-50 interface module (not included), which provides Ethernet and NMEA2000 connectivity. The pedestal and antenna assembly is rated IPX6 for water resistance, and the RI-50 module is rated IPX5. With a full start-up time of 30 to 40 seconds from shutdown, low electromagnetic emissions, and silent operation thanks to its brushless motor, this system is suited for demanding marine environments. Its construction features enhanced corrosion resistance.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049909039444,"sku":"000-15742-001","price":8341.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495238484308-1000.jpg?v=1783603509"},{"product_id":"simrad-kit-raccordement-pompe-pilote-automatique-systeme-orb","title":"Kit of fittings for ORB hydraulic steering system pump","description":"\u003cp\u003e\n    Designed for ORB hydraulic steering systems, the \u003cstrong\u003eSimrad autopilot pump connection kit\u003c\/strong\u003e simplifies the integration of SteadySteer functionality. This kit provides pre-assembled hydraulic components for Simrad MKII pumps (models 1 to 5), reducing installation errors and improving the reliability of the autopilot system.\n\u003c\/p\u003e\n\n\u003ch3\u003eHydraulic components and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The kit includes pre-assembled black hydraulic hoses with a diameter of 5\/16 inch, designed for a maximum pressure of 1500 PSI. It comprises two black hoses of 750 mm (29.5 inches) and one clear hose of 750 mm (29.5 inches), all with a diameter of 5\/16 inch and fitted with 9\/16\"-24 UNF fittings. For complete integration, the kit also contains two T-connectors (ORB-05M to 9\/16\"-24 UNF), an elbow connector (ORB-05M to 9\/16\"-24 UNF), and two 1\/4\" NPT to 9\/16\"-24 UNF adapters for standard ports. A SteadySteer flow sensor, a bottle of hydraulic fluid, and a filling funnel are also included.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and SteadySteer features\u003c\/h3\u003e\n\u003cp\u003e\n    This kit is compatible with ORB hydraulic steering systems and Simrad MKII pumps (models 1, 2, 3, 4, and 5). The SteadySteer functionality, supported by NAC-2 or NAC-3 processors (software version 1.1.02.00 or later), AP44, IS42, or AP48 control displays (software version 57.3.163 or later), and Simrad multifunction displays (software version 20.2 or later), allows immediate manual helm control without disengaging the autopilot. The system automatically re-engages once a new course is set, smoothing maneuvers.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    Installing this kit requires safety glasses and wrenches of 15 mm (9\/16\") and 16 mm (5\/8\"). Liquid Teflon-based thread sealant is recommended for SteadySteer kits. Note that any modifications not expressly approved by the manufacturer may void the equipment’s approval for use.","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049966022996,"sku":"000-15942-001","price":146.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495258472788-1000.jpg?v=1783619909"},{"product_id":"simrad-kit-raccordement-pompe-pilote-automatique-mkii-verado","title":"MKII pilot pump fitting kit for Verado systems","description":"\u003cp\u003e\n    The connection kit for the \u003cstrong\u003eSIMRAD\u003c\/strong\u003e MKII autopilot pump is a pre-assembled hydraulic solution designed to simplify the installation of Simrad MKII autopilot pumps (models 1 to 5) on Mercury Verado steering systems. This kit is compatible with o-ring (ORB) steering configurations, including SeaStar-type installations, ensuring direct and precise integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications of the connection kit\u003c\/h3\u003e\n\u003cp\u003e\n    The kit includes 1\/4-inch hydraulic lines with a maximum nominal pressure of 2800 PSI for most hoses. The return line typically has a diameter of 3\/8 inch and a maximum nominal pressure of 2250 PSI. The hoses are supplied in pre-cut lengths with specific fittings, such as 9\/16-18 ORFS to 9\/16 UNF, 9\/16-18 ORFS to 9\/16-24 ORFS, and 11\/16-16 ORFS. Connections are sealed with o-rings via ORFS fittings, supplemented by straight adapters from 1\/4 NPT to 9\/16-24 UNF.\n\u003c\/p\u003e\n\n\u003ch3\u003eKey features and benefits: SteadySteer™\u003c\/h3\u003e\n\u003cp\u003e\n    Installation is simplified thanks to pre-fabricated hydraulic hoses and pre-selected fittings, reducing connection errors and routing issues. A distinctive feature of this kit is the integration of the SteadySteer™ flow switch. This function allows manual course adjustment by turning the helm, without requiring the autopilot to be deactivated or navigating through menus. Once the new course is set, the autopilot automatically re-engages on the new straight-line trajectory, providing a smooth transition and continuous boat control. The kit components are manufactured with materials and standards that contribute to extended service life.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049967333716,"sku":"000-15943-001","price":491.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495258603860-1000.jpg?v=1783619915"},{"product_id":"simrad-kit-adaptateur-raccord-pilote-automatique-orb5-npt","title":"Autopilot fitting adaptor kit. 3 x ORB-5 to ¼\" NPT adaptors","description":"\u003cp\u003e\n    Designed to simplify the integration of Simrad autopilot systems, the \u003cstrong\u003eSimrad Autopilot fitting adaptor kit\u003c\/strong\u003e (part number 000-15944-001) allows connection of new pumps to existing hydraulic installations. This kit provides a solution for setups requiring transition between different connection standards.\n\u003c\/p\u003e\n\n\u003ch3\u003eHydraulic Integration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This kit is specifically designed to ensure compatibility with existing hydraulic systems. It is particularly relevant when replacing older pumps with \u003cstrong\u003eSimrad MkII Pumps 1, 2, 3, 4 and 5\u003c\/strong\u003e. Each adaptor in the kit features a male ORB-5 (O-Ring Boss) fitting at one end and a female ¼\" NPT (National Pipe Taper) fitting at the other. This configuration allows integration with NPT hoses already present in the boat's hydraulic steering system.\n\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents and Tools\u003c\/h3\u003e\n\u003cp\u003e\n    The kit includes a set of three adaptors, providing flexibility for various installation configurations. For installation, specific tools are required, including safety glasses, 15 mm (5\/6\") and 16 mm (5\/8\") wrenches, and a liquid thread sealant based on Teflon® (for the SteadySteer™ kit only, but recommended for NPT fittings). It is essential to ensure all modifications comply with the manufacturer’s standards to maintain equipment validity.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049968611668,"sku":"000-15944-001","price":39.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495258767700-1000.jpg?v=1783619920"},{"product_id":"simrad-kit-raccordement-pompe-pilote-automatique-orb-steadysteer","title":"ORB pump connection kit for autopilot with SteadySteer","description":"\u003cp\u003e\n    Designed for ORB (O-Ring Boss) steering systems, the \u003cstrong\u003eSimrad autopilot pump connection kit with SteadySteer\u003c\/strong\u003e (part number 000-15949-001) simplifies the integration of the SteadySteer feature. This kit aims to reduce issues related to field-terminated hydraulic hose connections and incorrect installation layouts, ensuring reliable autopilot implementation.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This kit is specifically designed for ORB steering systems and is compatible with Simrad MKII 1, 2, 3, 4, and 5 pumps. It facilitates the addition of SteadySteer functionality, which enhances the sailing experience by allowing autopilot control via the tiller and automatic course recovery on straight segments after manual intervention. Installation requires safety glasses, 15 mm (5\/16\") and 16 mm (5\/8\") wrenches, and liquid Teflon® thread sealant for the SteadySteer kit.\n\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSimrad autopilot pump connection kit with SteadySteer\u003c\/strong\u003e includes pre-assembled hydraulic components for simplified installation:\n    \u003c\/p\u003e\u003cul\u003e\n        \u003cli\u003eTwo black 5\/16\" diameter hoses rated to 1500 PSI, 810 mm (31.9\") long, with 9\/16\"-18 UNF to 9\/16\"-18 UNF fittings.\u003c\/li\u003e\n        \u003cli\u003eTwo black 5\/16\" diameter hoses rated to 1500 PSI, 360 mm (14.2\") long, with 9\/16\"-18 UNF to 9\/16\"-18 UNF fittings.\u003c\/li\u003e\n        \u003cli\u003eTwo T-connectors: ORB-5 to 9\/16\"-18 UNF \u003e 9\/16\"-18 UNF.\u003c\/li\u003e\n        \u003cli\u003eOne 90° elbow connector: ORB-05 to 9\/16\"-18 UNF.\u003c\/li\u003e\n        \u003cli\u003eTwo adapters: ¼\" NPT to 9\/16\"-18 UNF.\u003c\/li\u003e\n        \u003cli\u003eOne SteadySteer flow sensor.\u003c\/li\u003e\n        \u003cli\u003eOne bottle of hydraulic fluid.\u003c\/li\u003e\n        \u003cli\u003eOne filter funnel.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    These components are designed to ensure secure and functional hydraulic connections.","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049969070420,"sku":"000-15949-001","price":490.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495258866004-1000.jpg?v=1783619926"},{"product_id":"simrad-kit-installation-pompe-pilote-mkii-verado-steadysteer","title":"Autopilot Pump MKII fitting kit for Verado systems. Includes SteadySteer","description":"\u003cp\u003e\n    Designed to simplify the integration of Simrad MKII autopilot pumps (models 1, 2, 3, 4, and 5) with Verado steering systems, the \u003cstrong\u003eSimrad Autopilot Pump MKII\u003c\/strong\u003e installation kit provides a complete hydraulic solution. It ensures compatibility with Verado steering systems using O-Ring Boss (ORB) fittings, including SeaStar-type systems, and includes O-Ring Face Seal (ORFS) fittings specific to Verado.\n\u003c\/p\u003e\n\n\u003ch3\u003eHydraulic components included\u003c\/h3\u003e\n\u003cp\u003e\n    This kit includes pre-cut hydraulic hoses and fittings for direct and reliable installation. It comprises:\n    \u003c\/p\u003e\u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003e3 hoses\u003c\/strong\u003e with a 1\/4\" diameter, rated for a maximum pressure of 2800 PSI (some sources indicate 3000 PSI), each 915 mm (36\") long, with 9\/16-18 ORFS to 9\/16 UNF fittings.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003e2 hoses\u003c\/strong\u003e with a 1\/4\" diameter, rated for a maximum pressure of 2800 PSI (some sources indicate 3000 PSI), each 370 mm (14.5\") or 380 mm (15\") long, with 9\/16-18 ORFS to 9\/16-24 ORFS or 9\/16\" ORFS to 9\/16\" ORFS fittings.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003e1 hose\u003c\/strong\u003e with a 1\/4\" diameter, rated for a maximum pressure of 2800 PSI, 830 mm (32.7\") long, with 9\/16-18 ORFS to 9\/16-18 ORFS fittings.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003e1 return hose\u003c\/strong\u003e with a 3\/8\" diameter, rated for a maximum pressure of 2250 PSI, 830 mm (32.7\") or 390 mm (15.4\") long, with 11\/16-16 ORFS to 11\/16-16 ORFS fittings.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    The included T-fittings are:\n    \u003cul\u003e\n        \u003cli\u003e2 stainless steel T-fittings, 9\/16-18 ORFS.\u003c\/li\u003e\n        \u003cli\u003e1 brass T-fitting, 11\/16-16 ORFS \u003e 11\/16-16 ORFS \u003e 9\/16-18 ORFS.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    The kit reduces the risk of installation errors associated with on-site fabricated hydraulic hoses.\n\n\n\u003ch3\u003eIntegrated SteadySteer™ functionality\u003c\/h3\u003e\n\u003cp\u003e\n    The kit includes the SteadySteer flow switch, enabling intuitive autopilot control. This feature allows the user to take manual control of the vessel during turns without disengaging the autopilot. Once the new heading is set after a manual turn, the autopilot automatically reactivates without additional input or alarm. SteadySteer simplifies navigation by eliminating the need to check the display or press buttons to adjust course, providing smooth and effortless control. It is compatible with Simrad NAC-2 and NAC-3 autopilot computers (software version 1.1.02.00 or later), AP44, IS42, and AP48 control heads (software version 57.3.163 or 2.2-57.3.163 or later), and Simrad multifunction displays (software version 20.2 or later). This system is suitable for boats equipped with hydraulic steering.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049970479444,"sku":"000-15950-001","price":702.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495259193684-1000.jpg?v=1783619934"},{"product_id":"simrad-nac-1-pilote-hydraulique-mkii-pump-1","title":"NAC-1 Precision Hydraulic Pilot pack, MKII Pump-1","description":"\u003cp\u003e\n    Designed for hydraulic or cable-steered vessels up to 9 metres (30 feet), the \u003cstrong\u003eSimrad NAC-1 MKII Pump-1\u003c\/strong\u003e precision hydraulic pilot pack provides a complete and reliable autopilot solution. The system ensures accurate course-keeping and seamless integration with compatible Simrad multifunction displays and Lowrance HDS Elite\/FS screens.\n\u003c\/p\u003e\n\u003ch3\u003eMain System Components\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSimrad NAC-1 MKII Pump-1\u003c\/strong\u003e pack includes all essential components for a complete installation. It comprises an NAC-1 autopilot computer, a 0.8-litre PUMP-1 (MkII) hydraulic pump, a Precision-9 fluxgate compass, a Standby-Auto pushbutton for quick control, and Micro-C network components for NMEA 2000® connectivity.\n\u003c\/p\u003e\n\u003ch3\u003eNAC-1 Autopilot Computer\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNAC-1\u003c\/strong\u003e computer is the system’s core, featuring Continuum™ Steering technology for stable autopilot performance. It is compatible with vessels up to 9 metres and supports Simrad Virtual Rudder Feedback, eliminating the need for a separate rudder feedback unit on planing sterndrive or outboard powerboats. It is also compatible with Simrad RF25 rudder feedback units. The computer operates on 9–16V DC, with a typical current draw of 140mA plus the drive unit load, and provides a maximum continuous drive output of 8A (16A peak for 1 second). It features a Micro-C NMEA 2000® network port.\n\u003c\/p\u003e\n\u003ch3\u003ePUMP-1 (MkII) Hydraulic Pump\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003ePUMP-1 (MkII)\u003c\/strong\u003e hydraulic pump is a reversible 0.8-litre gear pump, powered by 12V DC. It is designed to be compatible with SeaStar manual steering pumps up to 14 cubic inches. It ships with three ORB-5 to 9\/16 UNF fittings. With a nominal flow rate of 0.8 Lpm, a typical current draw of 4–7A, and a peak current of 11A at 50 bar, it delivers efficient and quiet operation. The pump measures 168 mm in overall length. The total pack weight is 6.3 kg.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Features\u003c\/h3\u003e\n\u003cp\u003e\n    The pack is designed for simplified installation, with hydraulic connectors and hoses included, along with plug-and-play connectors that eliminate wire stripping or the use of screw-terminal blocks. Control options include a dashboard pushbutton for Auto\/Standby activation. The system supports course, track, and route navigation, and includes automatic turn patterns. It also allows for the addition of a second helm station via MFD Power Steer commands, without requiring additional hydraulic components or a steering wheel.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049973068116,"sku":"000-15951-001","price":1456.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495260864852-1000.jpg?v=1783619939"},{"product_id":"simrad-nac-1-outboard-pilot-pack-hydraulique-pompe-mkii","title":"NAC-1 Outboard Pilot Hydraulic Pack, MKII Pump-1","description":"\u003cp\u003e\n    Designed for vessels up to 9 meters (30 feet) equipped with a single outboard engine, the \u003cstrong\u003eSimrad NAC-1 Outboard Pilot\u003c\/strong\u003e hydraulic pack with MKII Pump ensures precise and reliable autopilot operation. This complete system includes the NAC-1 autopilot computer, the reversible hydraulic pump PUMP-1 MKII (0.8 Lpm), a Point-1 AP sensor for heading and GPS, and the necessary Micro-C network components for installation. It is compatible with both hydraulic and cable steering systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eHydraulic Integration and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The NAC-1 computer manages autopilot functions with a 12vDC power supply and a maximum drive output of 8A continuous (16A peak). The Micro-C network interface and NMEA 2000® compatibility via the Point-1 AP sensor allow integration with other navigation equipment. The PUMP-1 MKII is a reversible hydraulic gear pump rated at 0.8 Lpm, designed for quiet operation and improved efficiency. It is compatible with SeaStar manual tiller pumps up to 14ci.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSimrad NAC-1 Outboard Pilot\u003c\/strong\u003e pack is designed for simplified installation, including \"Plug \u0026 Socket\" connectors that eliminate the need for screw terminals or wire stripping. It includes a hydraulic fitting kit (3 x ORB-5 to 9\/16 UNF fittings) and a \"Standby-Auto\" pushbutton mounted on the dashboard for quick activation. The system can maintain a heading, follow a route or waypoint, and execute automatic tacking and jibing patterns. It also allows the addition of a second helm station via MFD steering commands without requiring additional hydraulics or a wheel. The Point-1 AP sensor provides solid-state heading data including heading, rate of turn, pitch, and roll.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049978605908,"sku":"000-15952-001","price":1047.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495262536020-1000.jpg?v=1783619944"},{"product_id":"simrad-cap-2-mfd-connecteur-capuchons-set","title":"CAP-2 MFD CONNECTOR CAP SET","description":"\u003cp\u003e\n    The \u003cstrong\u003eSIMRAD CAP-2 MFD CONNECTOR CAP SET\u003c\/strong\u003e is a set of protective caps designed specifically for Simrad multifunction displays (MFD). These caps are essential for protecting unused connector ports on your device from the harsh marine environment.\n\u003c\/p\u003e\n\n\u003ch3\u003eProtection and connection integrity\u003c\/h3\u003e\n\u003cp\u003e\n    This set of caps primarily serves to preserve the physical and electrical integrity of your MFD's connectors. It protects exposed ports from dust, moisture, corrosion, and mechanical damage. By sealing the openings, the \u003cstrong\u003eSIMRAD CAP-2 MFD CONNECTOR CAP SET\u003c\/strong\u003e helps maintain the waterproofing or weather resistance of the device, which is critical for long-term performance at sea. The set includes caps for USB A, USB C, HDMI, and other standard connectors.\n\u003c\/p\u003e\n\n\u003ch3\u003eInterference prevention\u003c\/h3\u003e\n\u003cp\u003e\n    In addition to physical protection, using these caps helps prevent potential electrical interference or short circuits on exposed connector pins. Made from durable materials, they ensure reliable coverage for your Simrad MFD interfaces, thereby ensuring the longevity of your electronic installations.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56050326339924,"sku":"000-16514-001","price":31.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/web-vetted-000-16514-001-bf9e77ef.jpg?v=1780919033"},{"product_id":"simrad-lf3000-linear-feedback-capteur-angle-barre-moteur-hors-bord","title":"LF3000 Linear Feedback","description":"\u003cp\u003e\n    Designed for boats equipped with outboard motors and hydraulic steering rams, the \u003cstrong\u003eSimrad LF3000 Linear Feedback\u003c\/strong\u003e is a sealed linear position sensor. It provides accurate rudder angle data to autopilot systems, improving heading hold accuracy and navigation.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLF3000 Linear Feedback\u003c\/strong\u003e offers a 300 mm (11.8 in) stroke and comes with a pre-wired 8.5 m (28 ft) cable. This cable length allows direct connection to the Simrad LFI3000 MK2 interface, which is required for integration with Simrad autopilot computers. Its weight is 1.297 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With a fully sealed construction, meeting or exceeding IPX7 standards, the \u003cstrong\u003eSimrad LF3000 Linear Feedback\u003c\/strong\u003e is designed to withstand marine environments. It includes a dedicated mounting bracket and clamps that allow direct attachment to the existing outboard motor ram, requiring no major modifications to the steering system. This design simplifies installation and ensures reliable operation even in harsh weather conditions.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56050328731988,"sku":"20188074","price":303.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495296352596-1000.jpg?v=1783603677"},{"product_id":"simrad-rf300-rudder-feedback-capteur-barre","title":"RF300 Rudder Feedback - Frequency","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad RF300 Rudder Feedback\u003c\/strong\u003e is a high-resolution rudder angle sensor designed for autopilot systems on boats equipped with inboard engines. It provides precise data on the rudder position, essential for smooth and accurate autopilot operation.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor uses a variable frequency output for direct connection to autopilot computers via a two-wire interface. Its center frequency is 3400 Hz, with a 20 Hz variation per degree of rudder movement. The unit ships with a 10-meter cable and a transmission link kit to simplify installation. Weighing approximately 0.5 kg, the RF300 is a rugged unit designed to withstand harsh marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and compliance\u003c\/h3\u003e\n\u003cp\u003e\n    The Simrad RF300 is compatible with various Simrad autopilot computers, including models AC70, AD80, SD80, NAC-3, and H5000. It is primarily used on inboard-powered boats requiring rudder angle display on the autopilot. This product has been tested and declared compliant with the requirements of IEC 60945:2002 for maritime navigation and radiocommunication equipment systems, as well as the Australian Radiocommunications (Electromagnetic Compatibility) Standard 2008 (Level 2).\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56050333221204,"sku":"20193744","price":256.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15495297892692-1000.jpg?v=1783620102"},{"product_id":"simrad-ap70mk2-kit-montage-support","title":"Simrad AP70MK2 mounting kit","description":"\u003cp\u003e\n    The Simrad 000-10590-001 mounting kit is an essential accessory designed specifically for the Simrad AP70MK2 professional autopilot control unit. This kit ensures secure and durable mounting of the control display, a critical component of Simrad navigation systems for demanding vessels. As an original part, it guarantees perfect compatibility and optimal resistance to vibrations and marine environment stresses, unlike generic mounting solutions that could compromise installation stability.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Reliability of the Simrad AP70MK2\u003c\/h3\u003e\n\u003cp\u003e\n    The AP70MK2 stands out as a dedicated autopilot interface, offering superior robustness and ergonomics for professional navigation. This differentiates it from autopilot controls integrated into multifunction displays, such as the Simrad NSS evo3S or GO series, which target more versatile uses. The 000-10590-001 mounting kit is therefore essential to maintain the integrity of this system, ensuring the AP70MK2 unit remains firmly anchored even in harsh sea conditions. With a weight of 0.3 kg, this bracket is designed for stable and reliable installation, extending equipment lifespan.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesigned for Marine Performance\u003c\/h3\u003e\n\u003cp\u003e\n    Choosing an official mounting kit is critical for marine installations, where a single component failure can have significant consequences. This kit for the AP70MK2 ensures compliance with Simrad quality standards, guaranteeing that the control unit is not only securely fixed but also protected against unwanted movements that could affect its performance or durability. This is a technical mounting solution optimized for securing essential navigation equipment.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56125694607700,"sku":"000-10590-001","price":176.54,"currency_code":"EUR","in_stock":true}]},{"product_id":"simrad-mo19-t-moniteur-tactile-19-pouces-haute-luminosite-ecran-marine","title":"Simrad MO19-T high-brightness touchscreen","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad MO19-T\u003c\/strong\u003e is a 19-inch multi-touch monitor designed for \"glass bridge\" installations in marine environments. It features a panoramic HD display with 1366 x 768 resolution and 1000-nit brightness, ensuring optimal visibility in bright sunlight or indoor conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This monitor includes HDMI, DVI, and two composite video inputs (BNC), providing versatile connectivity. It is designed to work with Simrad \"glass bridge\" systems and can also serve as an additional display for other compatible Simrad devices or HDMI-capable equipment. For chartplotter, fishfinder, or radar functionality, a Simrad NSO evo2 marine processor and accessories are required. NMEA 2000 connectivity allows control of Simrad backlighting.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With a flush-mount profile of just 8 mm, the MO19-T integrates discreetly into consoles or dashboards. It ships with silver and black trim options. Installation is simplified by front-mounting capability. Touch menu controls are integrated directly into the glass front bezel. The monitor supports 12 V DC power (10.8–18 V DC) with a maximum consumption of 40 W. Water resistance is rated IPX6 and IPX7 when flush-mounted, and IPX2 at the rear. It operates within a temperature range of -15°C to 55°C and withstands shocks and vibrations up to 100,000 cycles at 20 G.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56126375952724,"sku":"000-11262-002","price":4320.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513884393812-1000.jpg?v=1783626342"},{"product_id":"simrad-halo-antenne-radar-3ft","title":"Simrad HALO 3 ft radar antenna","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad HALO 3 ft radar antenna\u003c\/strong\u003e is a key component for HALO pulse-compression radar systems. Designed for recreational boating and light commercial use, this open-array antenna integrates X-Band solid-state radar technology, providing short- and long-range detection with advanced features for improved situational awareness at sea.\n\u003c\/p\u003e\n\n\u003ch3\u003eRadar Technology and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO-3 system, of which this antenna is part, uses pulse-compression technology, eliminating the need for a high-power magnetron. This approach allows for minimal warm-up time (16–25 seconds from power-on, instant-on from standby), significantly reduced power consumption, and lower electromagnetic emissions. The 3 ft antenna offers a maximum range of 48 nautical miles and a minimum range of 10 meters. It operates at an output power of 25W with a rotation speed of 24 to 48 rpm. Compatibility is ensured with Simrad NSS evo2 and NSO evo2 multifunction displays.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Navigation Features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSimrad HALO 3 ft antenna\u003c\/strong\u003e supports features such as InstantOn™ for immediate availability and Beam Sharpening, which improves target separation, delivering resolution equivalent to a 4 ft antenna. The radar supports dual-range operation, allowing simultaneous monitoring of two distinct zones. Dedicated signal processing modes (Harbor, Offshore, Weather, Bird) optimize settings for various conditions. Automatic MARPA target tracking can manage up to 10 targets (20 in dual-range mode), requiring a heading sensor and GPS.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With an average power consumption of 40W (at zero wind speed) and 6.5W in standby, this antenna is suited for 12\/24V DC systems. It is rated IPX6 for water resistance and operates in temperatures ranging from -25°C to +55°C. The horizontal beam width is 2.4° (with Beam Sharpening active, it can reach 1.6°), and the vertical beam width is 25° +\/-20%. The data interface is Ethernet 10\/100 Base-T. The antenna alone weighs 5.5 kg.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56126443716948,"sku":"000-11464-001","price":915.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513885081940-1000.jpg?v=1783626347"},{"product_id":"simrad-halo-antenne-radar-4-pieds","title":"Simrad HALO 4 ft Radar Antenna","description":"\u003cp\u003e\n    Designed for Simrad HALO 2000 and HALO 3000 radar systems, the \u003cstrong\u003eSimrad HALO 4 ft antenna\u003c\/strong\u003e is an open array antenna measuring 1.2 meters (48 inches) that provides a combination of short- and long-range detection. The HALO radar system, of which this antenna is a component, integrates pulse compression technology for improved target definition and reduced sea clutter.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Radar Capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eHALO 4 ft antenna\u003c\/strong\u003e is compatible with the HALO 2000 and HALO 3000 series. When paired with the HALO 2000 series, the system delivers power equivalent to a 12 kW magnetron radar, achieving a maximum range of 72 nautical miles. When paired with the HALO 3000 series, the system is equivalent to a 25 kW magnetron radar, extending the maximum range to 96 nautical miles. The minimum range is 6 meters for both series. The HALO radar system offers instant start-up from standby and 16 to 25 seconds from power-on (cold start).\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnology and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO radar system enables the antenna to achieve a rotation speed of 48 rpm for rapid updates. The HALO radar system uses Pulse Compression technology, combining the benefits of pulse and FMCW radars for enhanced detection. The HALO radar system integrates Beam Sharpening to optimize target separation, and its simultaneous dual-range operation allows monitoring of two distinct zones. The HALO radar system integrates Doppler VelocityTrack™ technology for visual identification of approaching targets and ZoneTrack™ for automatic tracking of 50 targets. The HALO radar system provides hazardous target alerts for radar and AIS.\n\u003c\/p\u003e\n\u003cp\u003e\n    The HALO radar system offers preset modes (Harbour, Offshore, Weather, Bird) for ease of use. The Bird+ mode on the HALO 3000 series uses the system’s full 130W power to detect bird flocks up to 8 nautical miles. The HALO radar system’s Solid-State technology ensures reliability and fast start-up, with low-power pulsed transmissions. The advanced digital signal processing of the HALO radar system reduces sea clutter.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The antenna is rated IPX6 for the pedestal and antenna, and IPX5 for the RI-50 interface module. It is designed to withstand winds of 80 knots at 48 rpm. Average power consumption of the radar system in zero-wind mode ranges from 45–60 W for HALO 2000 and 45–75 W for HALO 3000, with 11 W in standby. The system supports 12V or 24V DC input via the RI-50 module. The horizontal beam width is 1.8° and vertical beam width is 25°.\n\u003c\/p\u003e\n\u003cp\u003e\n    The physical dimensions of the pedestal with antenna mounted are 429 mm in height, with a weight of 20.3 kg. The safe compass distance is 1.0 m (standard) and 0.5 m (directional). The HALO radar system does not have a direct NMEA 2000 connection for radar data; data is transmitted via Ethernet. The HALO radar system, of which this antenna is a component, is compatible with Simrad chartplotters NSS™, NSX™, NSO™, and GO™, as well as radar control units R2009 and R3016.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56126525243732,"sku":"000-11465-001","price":1134.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513885933908-1000.jpg?v=1783626353"},{"product_id":"simrad-halo-antenne-kit-montage-rechange","title":"Simrad HALO radar antenna replacement mounting kit","description":"\u003cp\u003e\n    Designed for maintenance and refit, the \u003cstrong\u003eSimrad HALO Antenna replacement mounting kit\u003c\/strong\u003e (part number 000-12515-001) provides the hardware required to securely attach a HALO radar antenna to its pedestal. This kit is an original Simrad part, ensuring compatibility and precise fitment for HALO radar systems.\n\u003c\/p\u003e\n\u003ch3\u003eComponents and Materials\u003c\/h3\u003e\n\u003cp\u003e\n    The kit includes a set of four M8 dome nuts, four M8 spring washers, and four M8x16x1.2 flat washers. All components are manufactured from 316 stainless steel (316 SS), a material offering marine-grade durability and resistance to harsh marine environments. This material composition ensures long-term resistance to corrosion and weathering.\n\u003c\/p\u003e\n\u003ch3\u003eApplications and Benefits\u003c\/h3\u003e\n\u003cp\u003e\n    This kit is particularly suited for service projects, refits, or when reassembling an antenna after servicing. It allows direct replacement of worn original parts, simplifying reassembly and ensuring the radar installation remains secure. As an official Simrad part, it guarantees quality compliant with the manufacturer’s original specifications, extending the lifespan and reliability of the HALO radar equipment.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56127550783828,"sku":"000-12515-001","price":41.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513894289748-1000.jpg?v=1783626382"},{"product_id":"simrad-nss7-evo3-ecran-multifonction-gps-sondeur","title":"Simrad NSS7 evo3 with worldwide base map","description":"\u003cp\u003e\n    Designed for comprehensive marine navigation and advanced fish detection, the \u003cstrong\u003eSimrad NSS7 evo3\u003c\/strong\u003e multifunction display integrates cutting-edge technologies in a 7-inch format. This all-in-one solution combines chartplotting, fishfinding, and connectivity for an enhanced user experience on the water.\n\u003c\/p\u003e\n\n\u003ch3\u003eDisplay and Navigation\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNSS7 evo3\u003c\/strong\u003e features a 7-inch SolarMAX™ HD IPS optically bonded display with high visibility and ultra-wide 80° viewing angles in all directions. Its 600 x 1024 pixel resolution ensures optimal clarity, even in bright sunlight and with polarized sunglasses. For navigation, it includes a high-gain 10 Hz GPS\/GLONASS receiver capable of updating position ten times per second, compatible with WAAS, MSAS, and EGNOS. It comes with a worldwide base map and supports optional Navionics (Gold, NAV+ Platinum+), C-MAP (MAX N, MAX N+), and NV Digital (Raster US Charts) cartography.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Sonar Capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSimrad NSS7 evo3\u003c\/strong\u003e’s built-in sounder features dual-channel CHIRP sonar, ForwardScan® sonar, and StructureScan® HD imaging. It supports frequencies of 50\/200 kHz for single-channel CHIRP and HDI, and 455\/800 kHz for sidescan and downscan. Maximum depth is 1000 feet for mid\/high CHIRP and 300 feet for downscan and sidescan. The unit includes two 9-pin Xsonic Sonar ports for extended connectivity.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNSS7 evo3\u003c\/strong\u003e features GoFree® Wi-Fi wireless connectivity for online services, smartphone monitoring, and tablet control. It integrates NMEA 2000 and NMEA 0183 interfaces for standard connections to engines, audio systems, radars (including Halo™ Pulse Compression and Broadband Radar™), and Simrad autopilots. Its hybrid control system allows seamless switching between an intuitive multi-touch touchscreen and a full keypad with rotary knob, ensuring reliable operation in various marine conditions. It offers 16 GB of internal memory and two MicroSD card slots for data storage.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNSS7 evo3\u003c\/strong\u003e operates on 10–31.2V DC power. Its dimensions are 9 3\/8\" W x 5 7\/8\" H x 3 1\/2\" D (without bracket). With an IPX6 and IPX7 waterproof rating, it is designed to withstand marine environments. Mounting options include flush installation for a \"Glass Bridge\" look or bracket mounting.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56128206569812,"sku":"000-13237-001","price":1329.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513898713428-1000.jpg?v=1783626388"},{"product_id":"simrad-forwardscan-long-stem-sonde-kit-sonar-avant","title":"ForwardScan long-stem depth sounder kit","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad ForwardScan Long-Stem\u003c\/strong\u003e depth sounder kit is a forward-scanning sonar transducer designed for navigation safety and confidence. It provides a clear two-dimensional view of the seabed ahead of the boat, ideal for shallow, unknown, or poorly charted waters.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced Sonar Technology\u003c\/h3\u003e\n\u003cp\u003e\n    This transducer operates at a frequency of 180 kHz, minimizing interference with traditional 200 kHz depth or fish-finding transducers. The \u003cstrong\u003eForwardScan\u003c\/strong\u003e offers a forward range of 4 to 5 times the current depth, and up to 8 times the depth under optimal conditions. This allows real-time anticipation of submerged obstacles or seabed variations.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for through-hull mounting, the Long-Stem model features an extended stainless-steel through-hull fitting and a compensating block. This design accommodates hulls up to 47.6 mm (1 7\/8 inches) thick and keel angles from 0 to 28 degrees with the compensating block. It requires a standard 2-inch diameter through-hull opening. The kit includes the ForwardScan transducer, a long stainless-steel through-hull sleeve with a self-sealing valve, a compensating block, and a blanking plug. The transducer incorporates a water-temperature sensor. It connects to the StructureScan HD port on compatible Simrad displays such as the NSS Evo2, NSO Evo2, GO XSE, or to a SonarHub sounder module.\n\u003c\/p\u003e\n\u003ch3\u003eIntegrated Features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eForwardScan Long-Stem\u003c\/strong\u003e allows depth data to be overlaid directly on marine charts, with color-coded segments (green for safe, yellow for warning, red for critical) indicating deep, medium, and shallow zones ahead of the vessel. Alert depths are customizable based on draft. A shallow-depth alarm alerts the helmsman. The stainless-steel through-hull fitting is equipped with a self-sealing valve, enabling the transducer to be removed and reinserted for maintenance without hauling the boat out of the water. The bottom-tracking function displays a clear, solid terrain, providing an easy-to-interpret side view of underwater environments with real-time updates.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56128309723476,"sku":"000-13284-001","price":986.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513899401556-1000.jpg?v=1783606105"},{"product_id":"simrad-is42-instrument-display-afficheur-multifonction","title":"Simrad IS42 Instrument Display","description":"\u003cp\u003e\n    The Simrad IS42 instrument display is a multifunction digital interface designed for viewing essential navigation data. It consolidates the display of wind data, boat speed, depth, engine parameters, autopilot status, and AIS data, providing an overview on a dedicated screen.\n\u003c\/p\u003e\n\u003ch3\u003eHigh-visibility display and robust design\u003c\/h3\u003e\n\u003cp\u003e\n    The IS42 features a 4.1-inch (320 x 240 pixels, 4:3 aspect ratio) transflective TFT-LCD color screen with LED backlighting. Its optically bonded technology eliminates internal condensation and optimizes readability in full sunlight by utilizing ambient light. It offers a 170-degree viewing angle and adjustable illumination for day (white) and night (red, green, blue, or white). With dimensions of 118 x 115 x 28 mm and a weight of 0.32 kg, its discreet \"glass helm\" design integrates seamlessly into modern dashboards. Its IPX7 rating ensures resistance to temporary immersion, and it operates within a temperature range of -25°C to +65°C, supporting 100% RH humidity.\n\u003c\/p\u003e\n\u003ch3\u003eNMEA 2000® connectivity and extended features\u003c\/h3\u003e\n\u003cp\u003e\n    This device connects via a single NMEA 2000® cable for power and data, with a maximum power consumption of 2.16 W (160 mA at 13.5 V) and a network load of 4 LEN. It supports numerous NMEA 2000 PGNs, including heading (127250), speed (128259), depth (128267), GPS data (129026), wind (130306), and engine parameters (127488). When paired with an optional OP12 keypad, the IS42 enables full control of compatible Simrad autopilot systems (AC12, AC42, NAC-2, NAC-3). It also includes advanced AIS data management, displaying targets and enabling radio calls via a compatible AIS receiver. The waterproof silicone buttons ensure reliable operation in various maritime conditions.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56128429097300,"sku":"000-13285-001","price":444.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513900155220-1000.jpg?v=1783626393"},{"product_id":"simrad-ap48-controleur-pilote-automatique","title":"Simrad AP48 Autopilot Controller","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad AP48 Autopilot Controller\u003c\/strong\u003e is a dedicated control unit for Simrad Continuum autopilot systems. It combines an intuitive interface with an extended keypad, providing precise and responsive control for navigation. Designed with a 4.1-inch display, it features a modern \"glass helm\" design.\n\u003c\/p\u003e\n\n\u003ch3\u003eInterface and Precise Control\u003c\/h3\u003e\n\u003cp\u003e\n    The AP48 controller integrates an intuitive user interface, similar to the AP44 model but with an extended keypad. It features a large aluminum rotary dial for precise heading adjustments. Dedicated buttons allow instant heading changes of 1° and 10° port or starboard. The unit also includes Standby\/AUTO, Mode, Power, and Menu buttons for simplified navigation through options.\n\u003c\/p\u003e\n\n\u003ch3\u003eDisplay Technology and Visibility\u003c\/h3\u003e\n\u003cp\u003e\n    The 4.1-inch TFT-LCD color display offers a resolution of 320 x 240 pixels with a 4:3 aspect ratio. Its transflective technology ensures optimal daytime visibility and reduces power consumption. The display is optically bonded, eliminating internal condensation and fogging. It provides viewing angles of 80° (up\/down, left\/right) and a brightness of over 600 nits. The color scheme is adaptable, with white or black schemes for day mode, and red, green, blue, or white for night mode.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Autopilot Features\u003c\/h3\u003e\n\u003cp\u003e\n    The AP48 offers full access to Simrad Continuum’s advanced autopilot functions. It includes automated turning patterns for efficient hands-free maneuvers, useful for fishing or tacking. The \"No Drift Steering\" function automatically maintains heading against wind and current without requiring waypoints. When paired with a compatible fishfinder module, the controller can follow depth contours to maintain a constant depth.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This controller is NMEA 2000® certified with a Micro-C port (5 LEN) and supports NMEA 2000 compass sensors. It operates on a 12 V DC power supply (10.8 - 15.6 V DC), with a typical power consumption of 2.3 W and a maximum of 3 W. The unit weighs 0.51 kg and has dimensions of 177 x 115 x 56 mm. Its low-profile design allows for a flush mount with an 8 mm depth (excluding the rotary dial). It features IPx7 waterproofing and an operating temperature range of -25°C to +65°C.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56129729495380,"sku":"000-13894-001","price":882.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513910542676-1000.jpg?v=1783626421"},{"product_id":"simrad-go9-xse-traceur-cartes-multifunction","title":"Simrad GO9 XSE without transducer","description":"\u003cp\u003e\n    Designed for recreational boating, the \u003cstrong\u003eSimrad GO9 XSE\u003c\/strong\u003e is a 9-inch multifunction chartplotter integrating a depth sounder, GPS, and Wi-Fi. This large multi-touch screen features an intuitive tablet-style user interface with pinch-to-zoom and waypoint creation by simple touch. Its 1200-nit brightness ensures optimal visibility under all lighting conditions with 80° viewing angles on all axes. The product complies with EN 60945:2002 for maritime equipment and EN 301 489-17 V3.1.1 for electromagnetic compatibility of wideband data transmission systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced navigation features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGO9 XSE\u003c\/strong\u003e is equipped with a 10 Hz internal GPS receiver for precise positioning. It supports a wide range of cartography, including C-MAP (MAX N, MAX N+, Discover) and Navionics (Gold, NAV+ Platinum+), as well as C-MAP Easy Routing and Navionics Autorouting functions. The unit can manage 6,000 waypoints, 500 routes (with a maximum of 100 points per route), and 50 trails (up to 12,000 points). It has 90 MB of internal storage and two MicroSD slots, each supporting up to 32 GB.\n\u003c\/p\u003e\n\u003cp\u003e\n    For enhanced situational awareness, the system is compatible with Simrad Broadband 3G™\/4G™ and Halo™ Pulse Compression radars. It also integrates TripIntel™ technology for trip planning, displaying fuel range, tide levels, and route history. AIS data reception is possible via NMEA 2000.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and depth sounder\u003c\/h3\u003e\n\u003cp\u003e\n    With its integrated depth sounder support, the \u003cstrong\u003eSimrad GO9 XSE\u003c\/strong\u003e can display CHIRP, StructureScan® HD, DownScan Imaging™, and ForwardScan™ technologies (requires a compatible transducer, not included in this version). NMEA 2000® connectivity enables engine monitoring and integration with other marine equipment, while built-in Wi-Fi and Bluetooth facilitate screen sharing with mobile devices and software updates via the internet. The unit has a 5-pin Ethernet port (1 Mbit) and a Micro-C NMEA 2000 port. It is also compatible with BEP C-Zone digital switching systems and the SiriusXM® WM-3 satellite weather module (North America only).\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eDisplay: 9-inch, 800 x 480 pixel resolution, LED multi-touch, 1200-nit brightness.\u003c\/li\u003e\n    \u003cli\u003eGPS: 10 Hz internal receiver.\u003c\/li\u003e\n    \u003cli\u003eStorage: 2x MicroSD slots (max. 32 GB each), 90 MB internal storage.\u003c\/li\u003e\n    \u003cli\u003eConnectivity: 1x 5-pin Ethernet, 1x NMEA 2000 Micro-C, Wi-Fi, Bluetooth.\u003c\/li\u003e\n    \u003cli\u003ePower: 10–17V DC, typical consumption 12W, recommended fuse 3A.\u003c\/li\u003e\n    \u003cli\u003eDimensions: 24.3 x 17 x 8.3 cm (without bracket).\u003c\/li\u003e\n    \u003cli\u003eMounting: Bracket or flush.\u003c\/li\u003e\n    \u003cli\u003eWaterproofing: IPX6, IPX7.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56130754281812,"sku":"000-14444-001","price":842.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513918701908-1000.jpg?v=1783626450"},{"product_id":"simrad-go9-xse-traceur-cartes-sondeur-hdi","title":"Simrad GO9 XSE with HDI transducer","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad GO9 XSE\u003c\/strong\u003e (part number 000-14445-001) is a 9-inch multifunction display designed for navigation and sport fishing. Equipped with an integrated fishfinder, GPS, and Wi-Fi, this unit features a bright, wide multi-touch screen. Its 800 x 480 pixel resolution and 1200 nits brightness ensure clear visibility, with an 80-degree viewing angle top\/bottom and 80-degree left\/right. It meets maritime standard EN 60945:2002 for electromagnetic compatibility and is IPX6 and IPX7 certified, providing water resistance in marine environments, with an operating temperature range of -15°C to +55°C.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated Sonar and GPS Capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGO9 XSE\u003c\/strong\u003e integrates a fishfinder capable of displaying CHIRP, DownScan, SideScan, and ForwardScan imagery. This package includes an HDI (Hybrid Dual Imaging™) transducer (83\/200\/455\/800 kHz), which supports CHIRP mid\/high and DownScan imaging, enabling detailed underwater detection down to a maximum depth of 1000 feet with the 83\/200 kHz transducer. For navigation, an integrated 10 Hz, 32-channel GPS receiver ensures precise and rapid positioning.\n\u003c\/p\u003e\n\n\u003ch3\u003eExtended Connectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a Micro-C NMEA 2000® port, the \u003cstrong\u003eSimrad GO9 XSE\u003c\/strong\u003e enables full integration for engine control, autopilot, and compatible audio systems such as SonicHub®2. Its integrated Wi-Fi facilitates software updates, chart downloads, and screen mirroring to mobile devices. A 5-pin Ethernet port (1 Mbit) is dedicated to integrating Simrad Broadband 3G™, Broadband 4G™, and Halo™ Pulse Compression radar systems. Bluetooth is also integrated. The unit features two MicroSD slots supporting cards up to 32 GB (NTFS format for cards over 32 GB).\n\u003c\/p\u003e\n\n\u003ch3\u003eNavigation Features and User Interface\u003c\/h3\u003e\n\u003cp\u003e\n    The multi-touch interface of the \u003cstrong\u003eGO9 XSE\u003c\/strong\u003e is designed for intuitiveness, offering a smartphone- or tablet-like experience. It is compatible with a wide range of charting options, including C-MAP® MAX-N+, Navionics®, Insight®, and NV Digital® Charts. TripIntel™ technology provides key trip planning data, including fuel range and tide levels, while a dedicated cruising chart page consolidates critical navigation data. It is also compatible with C-Zone digital switching systems. The unit operates on 10 to 17 V DC, with a typical power consumption of 12W and a low-power sleep mode.","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56130862514516,"sku":"000-14445-001","price":999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513919422804-1000.jpg?v=1783626456"},{"product_id":"simrad-go7-xsr-sonde-hdi-traceur-cartes-sondeur","title":"Simrad GO7 XSR with HDI transducer","description":"\u003cp\u003e\n    Designed for recreational boating, the \u003cstrong\u003eSimrad GO7 XSR\u003c\/strong\u003e is a 7-inch multifunction display offering chartplotter and fishfinder capabilities. It integrates GPS, Wi-Fi, and a radar interface, making it suitable for sport boats, day cruisers, and small center consoles. Its 7-inch LED color multi-touch screen delivers a resolution of 800 x 480 pixels with a brightness of 1200 nits and viewing angles of 80° (up\/down, left\/right).\n\u003c\/p\u003e\n\u003ch3\u003eFishfinder and Integrated GPS Capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    This model comes with an HDI transducer (Hybrid Dual Imaging™) combining Broadband Sounder™ and DownScan Imaging™ technologies. It supports CHIRP Medium\/High frequencies (83\/200 kHz) and DownScan Imaging (455\/800 kHz), with ForwardScan™ compatibility (transducer sold separately). The internal 10 Hz GPS receiver provides 3-meter horizontal accuracy, supporting WASS, MSAS, EGNOS, and GLONASS. It can store 6,000 waypoints, 500 routes (with a maximum of 100 points each), and 50 tracks (with up to 12,000 points).\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSimrad GO7 XSR\u003c\/strong\u003e features built-in Wi-Fi and Bluetooth connectivity. It includes a Micro-C NMEA 2000® port for integration with other marine systems, as well as a 5-pin Ethernet connector for radar connection (compatible with Simrad Broadband 3G™\/4G™ and Halo™ Pulse Compression systems). It also exports NMEA 0183 data via Wi-Fi. The TripIntel™ technology helps optimize fuel consumption, and the unit is compatible with BEP C-Zone digital switching systems and ITC Lighting. The GO7 XSR is also compatible with the SonicHub2 audio system, Fusion Link, Sirius, and JL Audio (depending on region). It supports various autopilot modes (Auto, Nav., No Drift, Turn patterns) and includes low-depth, fish, and temperature alarms.","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56130962096468,"sku":"000-14446-001","price":605.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513920274772-1000.jpg?v=1783606145"},{"product_id":"simrad-go7-xsr-traceur-cartes-multifunction","title":"Simrad GO7 XSR chartplotter without transducer","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad GO7 XSR\u003c\/strong\u003e is a 7-inch multifunction display designed for sportboats, dayboats, and smaller center consoles. It integrates a depth sounder, a 10 Hz GPS, and Wi-Fi, providing a complete navigation interface. Its large multi-touch screen is super-bright and readable in full sunlight, with a resolution of 800 x 480 pixels and a brightness of 1200 nits.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Navigation and Chartplotting\u003c\/h3\u003e\n\u003cp\u003e\n    This chartplotter is equipped with an internal 10 Hz 32-channel GPS receiver, compatible with WAAS, MSAS, EGNOS, and GLONASS, ensuring 3-meter horizontal accuracy. It supports a wide range of cartography, including C-MAP (often with Discover Charts), Navionics, and Insight, with features such as 6000 waypoint marking, 500 routes (max. 100 points), and 50 tracks (max. 12,000 points). C-MAP Easy Routing and Navionics Autorouting functions are also supported. The TripIntel™ technology assists in trip planning by tracking fuel autonomy, tides, and voyage history.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSimrad GO7 XSR\u003c\/strong\u003e features integrated Wi-Fi connectivity for smartphone\/tablet mirroring and software updates. It includes a Micro-C NMEA 2000 port (1 LEN) for extended integration with onboard systems (engines, Simrad autopilots, entertainment systems via SonicHub2, Fusion Link, Sirius, JL Audio). A 5-pin Ethernet port is dedicated to Simrad Broadband 3G™\/4G™ and HALO® Pulse Compression radar systems. The Micro SD card reader supports up to 32GB (NTFS format for \u003e32GB). The system also supports BEP C-Zone digital switching and is compatible with GRIB weather data.\n\u003c\/p\u003e\n\n\u003ch3\u003eSonar and Radar Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Although supplied without a transducer, the GO7 XSR is compatible with various sonar technologies via an external transducer. It supports integrated CHIRP, Broadband Sounder, DownScan Imaging, StructureScan® HD, and ForwardScan™ sonar. Paired with an Active Imaging 3-in-1 transducer, it delivers CHIRP, SideScan, and DownScan Imaging views with the intelligent FishReveal™ target view. The GO7 XSR also functions as a display for Simrad Broadband 3G™\/4G™ and HALO® Pulse Compression radar systems.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56131083829588,"sku":"000-14448-001","price":570.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513921978708-1000.jpg?v=1783626461"},{"product_id":"simrad-halo24-radar-navigation-dome","title":"Simrad HALO24 Radar","description":"\u003cp\u003e\n    Designed for coastal and offshore navigation, the \u003cstrong\u003eSimrad HALO24 Radar\u003c\/strong\u003e is a compact 24-inch dome radar that delivers advanced target detection. It integrates solid-state pulse technology and pulse compression, enabling a maximum range of 48 nautical miles and a minimum detection of 6 meters. Its ability to operate at 60 RPM on short ranges up to 2 nautical miles provides near real-time situational awareness for collision avoidance.\n\u003c\/p\u003e\n\n\u003ch3\u003eDoppler VelocityTrack™ Technology and Dual Range\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eHALO24 Radar\u003c\/strong\u003e features Doppler VelocityTrack™ technology, which visually identifies moving targets. Approaching targets are displayed in yellow, receding targets in blue, and stationary targets in red, enhancing situational awareness. This feature automatically analyzes all targets without manual intervention. Dual-range capability allows monitoring distant weather conditions while detecting collision risks at short range.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a peak output power of 25 W and an X-band frequency of 9.4 to 9.5 GHz, the \u003cstrong\u003eSimrad HALO24 Radar\u003c\/strong\u003e offers a nominal horizontal beam width of 3.9°. It features instant-on from standby mode, eliminating warm-up time thanks to its solid-state design. Power consumption ranges from 14.5 to 27 W in operation and 3.9 W in standby (approximately 170 mA) at 13.8 V, compatible with 9 to 31.2 V DC systems. The radar supports MARPA target tracking for 10 targets (or 20 in dual range) and offers dedicated operating modes for harbor, offshore, weather, and bird detection. Its lightweight dome weighs 6.75 kg (without cable) and has compact dimensions (610 mm diameter, 225 mm height), featuring LED lighting and a low-profile design. It is IPX6 certified and operates between -25°C and +55°C, withstanding relative winds up to 51 m\/sec (100 knots).\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56131212575060,"sku":"000-14535-001","price":2388.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513923060052-1000.jpg?v=1783626466"},{"product_id":"simrad-halo20-plus-radar-compression-doppler","title":"Simrad HALO20+ Radar","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad HALO20+ Radar\u003c\/strong\u003e is a 20-inch compact pulse-compression radar designed to enhance situational awareness and collision avoidance. This 25 W solid-state radar unit offers a range of up to 36 nautical miles and ultra-fast operation with a 60 rpm rotation at short range.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Technology for Safe Navigation\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring Doppler VelocityTrack™ technology, the HALO20+ provides instant visual feedback on approaching or receding targets using simple color coding without manual selection. This feature enables rapid identification of potential threats, improving safety at sea. The radar also includes a dual-range function, allowing monitoring of distant weather cells while detecting collision risks at close range.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    With InstantOn™ technology, the HALO20+ radar activates instantly from its low-power standby mode (3.9 W at 13.8 V DC), providing high-speed radar coverage as needed. Full startup takes a few seconds. It offers multiple radar modes, including Harbor, Offshore, Weather, Bird, and custom modes, adjusting signal processing for optimal target visibility in various environmental conditions. The MARPA target tracking allows tracking up to 10 targets, or 20 in dual-range mode. The Beam Sharpening function improves the separation of small or distant targets.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO20+ operates on a DC power supply from 10.5 to 31.2 V with reverse polarity protection and an operational power consumption of 17 to 29 W. Its weight is 6.9 kg (without cable). It is designed to withstand marine environments with IPX6 waterproofing and an operating temperature range from -25° to +55° C. The scanner is compatible with maximum relative wind speeds of 51 m\/s (100 knots). The transmitter frequency is in the X-band, from 9.4 to 9.5 GHz, with a peak power of 25 W. The radar offers a minimum range of 6 meters. For installation, a minimum distance of 0.7 m (2.3 ft) from the compass is recommended.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56131300819284,"sku":"000-14536-001","price":2410.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15513923879252-1000.jpg?v=1783626472"}],"url":"https:\/\/skysat.fr\/en-tr\/collections\/simrad.oembed","provider":"Skysat","version":"1.0","type":"link"}