{"title":"Storage","description":"\u003ch2\u003eBoat electrical storage: batteries, protection, and energy management\u003c\/h2\u003e\n\u003cp\u003eBoat electrical storage isn't just about choosing a capacity in amp-hours. A reliable installation combines a battery suited to the sailing program, a BMS or cut-off protection when the chemistry requires it, a way to measure the actual state of the battery bank, and switching devices sized for the vessel's currents.\u003c\/p\u003e\n\u003cp\u003eThis collection groups the components that structure the battery bank: lithium and lead batteries, BMS, battery disconnect switches, battery monitors, charge relays, contactors, and disconnectors. The goal is to build a readable, maintainable architecture capable of powering instruments, the autopilot, VHF, windlass, lighting, refrigeration, and comfort systems without risking the starter battery.\u003c\/p\u003e\n\n\u003ch2\u003eMajor storage categories\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-tr\/collections\/batteries\"\u003eBatteries\u003c\/a\u003e: LiFePO4\/LFP batteries, service batteries, and batteries suited for 12 V, 24 V, or 48 V banks. Victron Smart, SuperPack, Lithium NG, Mastervolt, and MG Energy ranges should not be chosen solely based on capacity: check charge current, discharge current, required BMS, and charging temperature.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-tr\/collections\/bms-batteries\"\u003eBMS batteries\u003c\/a\u003e: smallBMS, BMS NG, Smart BMS, and Lynx Smart BMS modules to monitor lithium cells, authorize or cut charge and discharge, and prevent overcharging, deep discharge, or charging at low temperature.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-tr\/collections\/coupe-batteries\"\u003eBattery disconnect switches\u003c\/a\u003e: manual or remote-controlled switches to isolate a bank, cut a main circuit, or temporarily combine two batteries. The m-Series, e-Series, and ML-RBS families do not cover the same currents or uses.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-tr\/collections\/moniteurs-de-batterie\"\u003eBattery monitors\u003c\/a\u003e: shunts and displays like SmartShunt, BMV, or M2 DC to measure voltage, current, state of charge, and history. A monitor informs; it does not replace electrical protection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-tr\/collections\/relais-de-charge\"\u003eCharge relays\u003c\/a\u003e: ACR, SI-ACR, BatteryLink, and ML-ACR to automatically charge two battery banks from a common source, then isolate them when voltage drops.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-tr\/collections\/relais-contacteurs\"\u003eContactors, solenoids \u0026amp; disconnectors\u003c\/a\u003e: L-Series solenoids, ML contactors, m-LVD, and ATD to control or cut a power circuit, protect against low-voltage discharge, or delay a cut-off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLithium, lead, AGM: the choice depends on the architecture\u003c\/h2\u003e\n\u003cp\u003eLithium LiFePO4 offers weight savings, greater usable depth of discharge, and more stable voltage. In return, it requires a more rigorous architecture: compatible BMS, charge and discharge cut-off, alternator protection, properly sized fuses, and sometimes a DC\/DC charger or external regulator depending on the engine and installed bank.\u003c\/p\u003e\n\u003cp\u003eLead, AGM, or gel batteries remain relevant for simple uses, engine starter batteries, or installations where robustness and tolerance outweigh energy density. They handle repeated deep discharges less well, but their integration can be more straightforward in an existing architecture.\u003c\/p\u003e\n\n\u003ch2\u003eWhat to size before ordering\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDaily consumption\u003c\/strong\u003e: instruments, autopilot, lighting, refrigeration, communication, pump, computer, inverter. Without an energy balance, battery capacity is a fragile estimate.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum currents\u003c\/strong\u003e: windlass, thruster, inverter, starter, charger, and alternator dictate cable cross-sections, fuses, battery disconnect switches, and contactors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCharging sources\u003c\/strong\u003e: engine alternator, shore power charger, MPPT solar, hydrogenerator, generator, or inverter-charger have different profiles and limits.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBank separation\u003c\/strong\u003e: the starter battery must remain available. Charge relays and ACRs serve a different purpose than contactors or low-voltage disconnectors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMonitoring\u003c\/strong\u003e: a bank that isn't measured often leads to misinterpretation. A correctly configured shunt is more reliable than a voltage reading alone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCommon mistakes\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eComparing two batteries solely on Ah without considering voltage, chemistry, permissible current, and BMS compatibility.\u003c\/li\u003e\n  \u003cli\u003eReplacing lead with lithium without revising the alternator charging, cut-off thresholds, and main fuse.\u003c\/li\u003e\n  \u003cli\u003eInstalling an undersized battery disconnect switch or contactor relative to the actual current of the windlass or inverter.\u003c\/li\u003e\n  \u003cli\u003eConfusing monitor, BMS, and circuit breaker: measuring, protecting, and cutting are three different functions.\u003c\/li\u003e\n  \u003cli\u003eNeglecting maintenance: accessibility of fuses, cable labeling, terminal tightening, and onboard schematic documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSkysat advice\u003c\/h2\u003e\n\u003cp\u003eFor a reliable storage installation, start with the complete schematic rather than an isolated battery spec sheet. Define consumers, charging sources, battery chemistry, protections, and cut-off modes. A high-end lithium battery poorly integrated can be less reliable than a simpler bank that is properly protected.\u003c\/p\u003e\n\u003cp\u003eOn a refit, we first check the existing wiring, grounds, DC distribution, available space, ventilation, and alternator capacity. Only then do we select the battery, BMS, monitor, and switching devices. It is this overall coherence that makes the difference at sea.\u003c\/p\u003e","products":[{"product_id":"optima-batterie-bluetop-12v-50ah-agm-marine","title":"12V 50Ah blue starter battery","description":"\u003cp\u003e\n    The Optima BlueTop BA806 battery is a 12V 50Ah starting battery designed for demanding marine applications and recreational vehicles. It features patented AGM SPIRACELL® technology, providing a reliable and consistent power source. Compared to conventional batteries, the BlueTop stands out for its ability to deliver high starting current even in extreme conditions, with 815A cold cranking amps (CCA) and 1000A marine cranking amps (MCA).\n\u003c\/p\u003e\n\n\u003ch3\u003eAGM SPIRACELL® technology and performance\u003c\/h3\u003e\n\u003cp\u003e\n    Thanks to its spiral-wound AGM design, this Optima battery offers superior vibration resistance, estimated at over 15 times that of traditional batteries. This makes it particularly suitable for marine environments where shocks and constant movement are common. Its 100-minute reserve capacity at 25 amps ensures prolonged power supply for onboard electronics. The SPIRACELL® technology also enables faster recharging and a low self-discharge rate, maintaining charge for up to 12 months at room temperature.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatility and durability\u003c\/h3\u003e\n\u003cp\u003e\n    The Optima BlueTop BA806 battery is a starting battery, capable of providing the power needed to start the engine. Its sealed, maintenance-free design eliminates spill risks and allows flexible mounting in almost any position. It is specifically recommended for marine applications requiring powerful starting, as well as for starting motorhomes and industrial equipment. Its lifespan is up to three times longer than that of classic marine batteries.\n\u003c\/p\u003e","brand":"Optima Batteries","offers":[{"title":"Default Title","offer_id":53723737096532,"sku":"BA806","price":257.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_95d9b10d-af5d-4a28-b36d-8121354f058f.jpg?v=1779962363"},{"product_id":"bep-panneau-gestion-batterie-16-disjoncteurs-unipolaires","title":"Battery management panel with 16 single-pole circuit breakers","description":"\u003cp\u003e\n    Designed for continuous DC power distribution in marine systems, the \u003cstrong\u003eBEP 800-MS3 battery management panel\u003c\/strong\u003e provides a centralized solution for 16 circuits. This panel integrates Airpax magneto-hydraulic single-pole circuit breakers, known for their reliability in marine environments and their \"trip-free\" design that prevents forced activation in case of overload. It is ideal for vessels requiring robust and direct management of their DC loads.\n\u003c\/p\u003e\n\n\u003ch3\u003eElectrical capabilities and configuration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eBEP 800-MS3\u003c\/strong\u003e features 16 load circuits, with typical circuit breaker configurations including a mix of 5A, 10A, 15A, 20A, and 25A to suit various equipment. Operating at a nominal voltage of 12V, it can be adapted to 24V systems by adding a resistor. The maximum capacity per bus or total amperage is 160A, ensuring efficient power management. Some models may include a 12 or 6-way negative bus.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and integration\u003c\/h3\u003e\n\u003cp\u003e\n    Made from powder-coated marine-grade aluminum, this panel resists corrosion and demanding marine conditions. Its Contour design is complemented by LED-backlit green labels for nighttime visibility, and red LEDs indicate the \"on\" status of each system. Compared to fully digital solutions such as those from CZone (also part of the Navico group), the \u003cstrong\u003eBEP 800-MS3\u003c\/strong\u003e offers a more traditional and mechanical approach to power management, prioritizing simplicity and robustness in direct circuit control. It serves as a fundamental component for DC distribution, compliant with ABYC electrical safety standards.\n\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":53723751547220,"sku":"800-MS3","price":1244.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506544341332-1000.jpg?v=1783601245"},{"product_id":"quick-repartiteur-charge-electronique-1e-2s-160a","title":"Battery distributor 1E\/2S\/160A","description":"\u003cp\u003e\n    Designed to optimize energy management on board, the QUICK RC162 electronic load distributor (model ECS162 \/ FBECS1620000D00) is a solution dedicated to 12V and 24V systems. This device efficiently and independently recharges multiple battery banks from a single charging source, such as an alternator. With one input and two outputs, it manages a maximum charging current of 160 amperes per input, ensuring proper distribution to connected batteries.\n\u003c\/p\u003e\n\n\u003ch3\u003eMOSFET technology for optimized charging\u003c\/h3\u003e\n\u003cp\u003e\n    The QUICK RC162 distributor integrates MOSFET technology, giving it the major advantage of operating with negligible, even zero, voltage drop. Unlike traditional diode-based distributors that can cause significant voltage loss, this model ensures that your batteries receive the full charging voltage from your alternator or charger, optimizing their lifespan and recharge speed. It isolates battery banks, preventing mutual discharge, and automatically distributes current to the least charged battery for maximum efficiency.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and installation\u003c\/h3\u003e\n\u003cp\u003e\n    With dimensions of 195 x 68 x 135 mm (L x H x W) and a weight of approximately 1.2 kg, the RC162 features a compact design that facilitates installation and wiring in various marine environments. Its passive cooling contributes to its reliability and silent operation. It can be installed in vertical or horizontal position, offering flexible integration. The distributor is compatible with an input voltage range of 5 to 31 Vdc and is equipped with an LED operating indicator. It is designed for low power dissipation and maintenance-free use across a wide range of ambient temperatures. The PDF documentation is included to facilitate implementation.\n\u003c\/p\u003e","brand":"Quick","offers":[{"title":"Default Title","offer_id":53723755282772,"sku":"RC162","price":196.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506547683668-1000.jpg?v=1783601289"},{"product_id":"rule-contacteur-pompe-cale-niveau-12-24v-14a","title":"Bilge pump switch","description":"\u003cp\u003e\n    Designed for automatic bilge pump management, the RULE A Matic 35A level switch (part number RL035) is an essential safety device for navigation. This unit is suitable for 12V and 24V marine electrical systems, capable of switching a maximum current of 14A at 12V and 7A at 24V. It features a mercury-free float switch, ensuring environmental compliance while providing reliable water level detection.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and compliance\u003c\/h3\u003e\n\u003cp\u003e\n    The RULE 35A switch is supplied with 16 AWG (1.29 mm) wiring of 712 mm length, facilitating integration into various bilge configurations. It is designed to operate specifically with fresh water and salt water. Installation must comply with ABYC standards, and the float switch must be positioned at or above the pump base for positive shut-off. This model meets EN 61000-6-1:2001, EN 61000-6-3:2007 and ISO 10133:2000 standards, attesting to its reliability and electromagnetic compatibility in the marine environment.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning in the RULE range\u003c\/h3\u003e\n\u003cp\u003e\n    The RULE 35A switch is positioned as a standard model for medium-capacity bilge pumps. Within the RULE range, it is complemented by higher-capacity models such as the 37A and 40A, which can handle up to 20A at 12V and 10A at 24V. The 37A model offers a 5-year warranty, compared to 2 years for the 35A and 40A. The 40A model features an integrated protective plate. The choice of model will therefore depend on the maximum amperage of the pump to be controlled and specific requirements regarding protection and warranty.\n\u003c\/p\u003e","brand":"Rule","offers":[{"title":"Default Title","offer_id":53723771273556,"sku":"RL035","price":42.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506559906132-1000.jpg?v=1783601384"},{"product_id":"samlex-controleur-batterie-12-24v-automatique","title":"Automatic 12\/24V battery monitor","description":"\u003cp\u003e\n    The Samlex CB823 automatic battery monitor is an energy management solution designed for precise monitoring of multiple battery banks in marine or standalone environments. Unlike solar charge controllers such as the Samlex MSK-10A, MSK-20A, or SCC-30AB, which manage power flow from solar panels, or automatic battery isolators like the ACR-160 that handle load distribution between batteries, the CB823 focuses on acquiring and displaying detailed data on battery status.\n\u003c\/p\u003e\n\u003ch3\u003eMulti-Bank Monitoring and Extended Capacity\u003c\/h3\u003e\n\u003cp\u003e\n    This monitor allows monitoring up to three voltage-based battery banks and two current-based battery banks. It provides data display in analog, digital, or graphical mode, covering a voltage range from 0 to 32 VDC. The managed battery capacity ranges from 20 Ah to 999 Ah, and can be extended to 9999 Ah with additional features not detailed here. The CB823 also includes high and low voltage alarms for the three battery banks, ensuring rapid detection of potential issues. Its power supply is compatible with 9-35 VDC systems, and its consumption is 9 mA at 12 V, minimizing impact on autonomy.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The CB823 monitor stands out for its role as an interface. It includes a PC interface box (dimensions 86x66x27mm) and a connection cable to the E-XPERT pro system, indicating its ability to integrate into more complex energy management systems. The main unit dimensions are Ø 60x20mm, requiring a 55mm hole for flush mounting, followed by screwing onto a ring. These features position it as a monitoring and alert module, essential for users requiring increased visibility on the health of their battery banks, complementary to Samlex charge or isolation devices.\n\u003c\/p\u003e","brand":"Samlex","offers":[{"title":"Default Title","offer_id":53723775664468,"sku":"CB823","price":79.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506562363732-1000.jpg?v=1783601429"},{"product_id":"blue-sea-coupe-batterie-distance-ml-rbs-24v-500a","title":"Remote battery switch ML-RBS with manual control - 24 V DC 500 A","description":"\u003cp\u003e\n    Designed for demanding marine electrical systems, the BLUE SEA ML-RBS 7702B-BSS remote battery switch is a power management solution for 24V DC installations. This device offers high load switching capacity, with a continuous current of 500A, an intermittent current of 700A (for 5 minutes), and a cranking current of 1450A (for 30 seconds).\n\u003c\/p\u003e\n\u003ch3\u003eTechnology and Key Features\u003c\/h3\u003e\n\u003cp\u003e\n    The ML-RBS 7702B-BSS incorporates a bi-stable magnetic latching technology, meaning it draws no current in the ON or OFF position, thereby reducing parasitic drain. Current is only drawn during state changes (less than 4A for 40 ms). Its silver alloy contacts ensure high reliability for active load switching. Unlike the ML series solenoids without manual control (PN 7701\/7703), this 7702B-BSS model features a manual control button that provides an additional safety level. This function allows manual activation or deactivation with or without electrical power, and includes an OFF position lock for maintenance operations. The product is designed with 3\/8\"-16 (M10) tinned copper studs for maximum conductivity and enhanced corrosion resistance, ensuring robust connections with a maximum torque of 15.8 N•m (140 in-lb).\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The ML-RBS 7702B-BSS battery switch complies with external ignition protection requirements ISO 8846 and SAE J1171, and is CE marked, making it suitable for gasoline engine compartments on boats. Its IP66 ingress protection rating shields it from powerful water jets. The device supports a contact operating voltage of 0-64V, offering versatility for multi-voltage systems, while its nominal control voltage is 24V DC (range: 18-32V DC). The ML-RBS 7702B-BSS positions itself as an advanced solution for 24V battery management, providing a more performant and secure alternative to classic manual switches or solenoids without direct physical control options.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"","offer_id":53723783135572,"sku":"7702B-BSS","price":209.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Coupe-batterie_a_distance_ML-RBS_avec_commande_manuelle_-_24V_DC_500A_7702B-BSS_-_Ref_3d646202.jpg?v=1779201732"},{"product_id":"blue-sea-coupe-batterie-on-off-hd-afd","title":"Robust HD series battery switch with AFD","description":"\u003cp\u003e\nThe robust ON-OFF battery switch HD series with AFD from BLUE SEA, part number 3001B-BSS, is designed for managing single-battery circuits in demanding marine installations. With a continuous rating of 600 amperes and a 1,750-ampere starting capacity for 30 seconds, it is suitable for large diesel engines and high-power electrical systems. This model stands out for its robustness and its Alternator Field Disconnect (AFD) function, which protects the alternator diodes in case of battery disconnection while the engine is running.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and performance of the HD series\u003c\/h3\u003e\n\u003cp\u003e\nBLUE SEA’s HD series sits above the m-Series (300A continuous) and e-Series (350A continuous) in terms of current capacity, making it ideal for applications requiring superior power management. The tinned copper terminals (1\/2 inch \/ M12-1.75) provide maximum conductivity and corrosion resistance, with a one-piece design to reduce the risk of overheating. Their 7\/8-inch (22.22 mm) length allows for multiple cable lugs, facilitating the integration of up to eight charge cables. The recommended tightening torque is 24.86 N·m (220 in-lb) for 4\/0 AWG (120 mm²) battery cables.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and compliance\u003c\/h3\u003e\n\u003cp\u003e\nThe 3001B-BSS complies with American Boat and Yacht Council (ABYC) requirements for battery circuit interrupters. It is UL-listed (UL 1107) for electrical power switches and meets external ignition protection requirements UL 1500 and SAE J1171, making it safe for installation on gasoline-powered boats. Its IP66 ingress protection rating ensures protection against dust and powerful water jets, guaranteeing reliability in marine environments. The housing allows for surface or rear-panel mounting, offering installation flexibility.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":53723783299412,"sku":"3001B-BSS","price":98.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Coupe_batterie_On-Off_robuste_serie_HD_avec_AFD_3001B-BSS_-_Ref_5647b54d.jpg?v=1779201293"},{"product_id":"blue-sea-interrupteur-batterie-serie-m-300a-bipolaire-marin","title":"m 300 A red bipolar battery switch","description":"\u003cp\u003e\n    Designed for simplified and secure electrical management on board, the BLUE SEA m-Series 300A bipolar battery switch (part number 6010B-BSS) is a compact solution for marine applications and recreational vehicles. It is specifically sized for outboard motors and small gasoline or diesel engines, with a continuous rating of 300A per circuit and a maximum voltage of 32V DC. Its bipolar design allows simultaneous switching of two isolated battery banks or management of positive and negative conductors according to required configurations. It belongs to the BLUE SEA m-Series, known for its optimized format, positioned below the e-Series (350A) and HD-Series (up to 600A) designed for more powerful propulsion systems.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and Reliability in Marine Environments\u003c\/h3\u003e\n\u003cp\u003e\n    The 6010B-BSS model delivers electrical performance with a continuous rating of 300A per circuit. It also supports intermittent peaks of 450A for 5 minutes and 675A during startup for 30 seconds per circuit. The tinned copper 3\/8\"-16 (M10) terminal studs ensure maximum conductivity and enhanced corrosion resistance, a critical feature in marine environments. The one-piece terminal stud design eliminates any risk of loosening over time. This switch complies with ABYC requirements, is UL 1107 listed, and meets UL 1500 and SAE J1171 standards for external ignition protection, ensuring safe installation on gasoline-powered boats. Its IP66 rating makes it resistant to dust and powerful water jets.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Positioning in the BLUE SEA Range\u003c\/h3\u003e\n\u003cp\u003e\n    This battery switch offers versatile mounting options, allowing surface, front-panel, or rear-panel installation to adapt to various integration configurations. An insulating cover with detachable sections protects the rear contacts and facilitates cable access from multiple directions. The 6010B-BSS model is a \"Dual Circuit™\" type switch, meaning it manages two isolated circuits without automatic combining functionality. It is distinct from the 6011 model, the \"Dual Circuit Plus™,\" which includes battery combining functionality. This distinction is important for system designers seeking a purely isolating switching solution without the added complexity or functionality of combining, typically to strictly separate a starter battery bank from a service bank in dual-battery installations.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"","offer_id":53723785298260,"sku":"6010B-BSS","price":53.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Interrupteur_de_batterie_serie_m_300A_rouge_bipolaire_6010B-BSS_-_Ref_071e43dc.jpg?v=1779201440"},{"product_id":"blue-sea-relais-charge-automatique-ml-acr-12v-500a","title":"Automatic charge relay ML-ACR with manual control - 12 V DC 500 A","description":"\u003cp\u003e\n    Designed for managing high-demand battery systems, the \u003cstrong\u003eML-ACR 7622B-BSS\u003c\/strong\u003e automatic charge relay from BLUE SEA is a robust solution for 12V DC installations. This relay uses Magnetic Latching (ML) technology to automatically combine and isolate battery banks, ensuring efficient charge distribution with very low current consumption in ON or OFF state.\u003cbr\u003e\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical performance and features\u003c\/h3\u003e\n\u003cp\u003e\n    With a continuous capacity of 500A, an intermittent capacity of 700A (for 5 minutes), and a starting capacity of 1450A (for 30 seconds), the ML-ACR 7622B-BSS is suited for high-efficiency alternators and large battery banks. It includes advanced isolation features, such as the Start Isolation (SI) function to protect sensitive electronics from service loads during engine start, and the Engine Isolation (EI) function to isolate two engines in operation, optimizing alternator output. Unlike models like the M-ACR (65A) or the SI-ACR (120A), the ML-ACR 500A is sized for applications requiring significantly higher current management.\u003cbr\u003e\n    This relay features dual-bank battery load detection and can be manually controlled via a supplied switch for emergency or maintenance situations. The silver-alloy contacts ensure high reliability for switching loads under load, and the 3\/8\"-16 (M10) tinned copper studs provide maximum conductivity and corrosion resistance. Its design complies with ISO 8846 and SAE J1171 ignition protection requirements and is IP66 certified, allowing installation in engine compartments of gasoline-powered boats. This model is optimized for AGM\/GEL batteries, differing from the ML-ACR Li-Ion version designed specifically for lithium battery systems.\u003cbr\u003e\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eML-ACR 7622B-BSS\u003c\/strong\u003e relay is equipped with a Contura remote control switch (PN 2146) with integrated LED, providing visual indication of the relay’s status (combined, isolated, voltage lock, start isolation, or engine isolation). Its current consumption is less than 40mA in continuous operation and under 7.0A during state changes, minimizing parasitic discharge. It is designed for 100,000 switching cycles, ensuring long-term durability in demanding marine environments. To achieve its maximum rated capacities, it requires wiring of 2x 4\/0 AWG (2x 120 mm²).\u003cbr\u003e\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"","offer_id":53723787985236,"sku":"7622B-BSS","price":243.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Relais_de_charge_automatique_ML-ACR_avec_controle_manuel_-_12V_DC_500A_7622B-BSS_-_Ref_c3ed6312.jpg?v=1779201660"},{"product_id":"blue-sea-selecteur-batterie-serie-m-300a-3-positions","title":"Battery selector switch series M 300 A red 3 positions","description":"\u003cp\u003e\n    The BLUE SEA series m 300A red battery selector, part number 6008B-BSS, is designed for managing DC power systems on boats equipped with outboard motors or small gasoline\/diesel engines. This 3-position switch (OFF\/1\/2) allows selecting one of two batteries to power loads, with no combining function.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    With a continuous current rating of 300A and a 900A starting current for 30 seconds, the 6008B-BSS supports a maximum voltage of 32V DC. Its tinned copper terminals of 3\/8\"-16 (M10) ensure maximum conductivity and corrosion resistance, with a recommended tightening torque of 13.56 N·m. The one-piece terminal stud design guarantees stable connections over time. This model is ignition-protected per UL 1500 and SAE J1171 standards and has an IP66 rating.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the BLUE SEA Range\u003c\/h3\u003e\n\u003cp\u003e\n    The BLUE SEA series m, which includes the 6008B-BSS, is distinguished by its compact format and 300A continuous amperage, specifically targeting outboard motors and small gasoline or diesel engines. In comparison, the series e offers 350A continuous amperage for inboard gasoline or diesel engines, while the HD series is designed for large diesel engines with continuous amperage up to 600A. The 6008B-BSS, as a 3-position selector, focuses on battery isolation and selection, unlike 4-position or Dual Circuit Plus selector models that include battery combining functions. It also holds CE, ISO 8846 Marine, UL 1107, and UL 1500 certifications, and meets ABYC requirements.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":53723788542292,"sku":"6008B-BSS","price":52.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Selecteur_de_batterie_serie_m_300A_rouge_3_positions_6008B-BSS_-_Ref_24a99553.jpg?v=1779201419"},{"product_id":"digital-yacht-controleur-batterie-bm100-nmea-2000","title":"Battery monitor for NMEA 2000 network","description":"\u003cp\u003e\n    Designed for full integration of energy management aboard, the BM100 battery monitor from Digital Yacht is a monitoring solution dedicated to NMEA 2000 networks. This system combines a Victron Energy SmartShunt, known for its accuracy, with a Digital Yacht-developed veKonvert NMEA 2000 interface acting as a universal gateway for VE.Direct data. The BM100 allows detailed battery information to be displayed on any compatible NMEA 2000 multifunction display (MFD), regardless of brand—Garmin, Raymarine, Furuno, or Navico.\n\u003c\/p\u003e\n\u003ch3\u003eAccurate Monitoring and NMEA 2000 Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The BM100 provides precise measurements of voltage, current, and DC capacity for 12V, 24V, and 48V systems. It delivers real-time data such as battery voltage, charge\/discharge current, state of charge (SoC), time remaining before depletion, and historical data including deepest discharge and number of charge\/discharge cycles. In addition to the included 500A SmartShunt, 1000A and 2000A versions are available for more demanding systems. The system is self-powered via the NMEA 2000 bus, simplifying installation.\n\u003c\/p\u003e\n\u003ch3\u003eExtended Connectivity and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    In addition to integration with MFDs via NMEA 2000, the BM100 offers wireless Bluetooth connectivity, enabling detailed monitoring and analysis on smartphones or tablets. Configurable alarms for low voltage and low capacity can be set up. The monitor can also track the voltage of a secondary battery, such as a starter battery. Installation is simplified by a \"plug 'n play\" approach, though an adapter cable may be required for non-standard NMEA 2000 networks, such as Raymarine’s SeaTalkNG (P\/No A06045). Internal DIP switches allow precise binary configuration (e.g., 0=0000 to 15=1111). The system indicates its status via LEDs (Power, N2K, VE.Dir, Error).\n\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":53723835728212,"sku":"ZDIGISSBM100","price":300.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506606666068-1000.jpg?v=1783602288"},{"product_id":"victron-energy-batterie-agm-super-cycle-12v-100ah","title":"AGM Super Cycle Battery 12\/100Ah","description":"\u003cp\u003e\n    The \u003cstrong\u003eVICTRON ENERGY\u003c\/strong\u003e AGM Super Cycle 12\/100Ah battery is designed for marine applications requiring reliable power supply and energy storage. This battery uses AGM Super Cycle technology, offering a nominal capacity of 100Ah at C20 (10.8 V), 90Ah at C10 (10.8 V), and 82Ah at C5 (10.8 V).\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    With dimensions of 260 x 168 x 215 mm and a weight of 26 kg, the BAT412110081 model features M6 insert terminals for secure connections. Its cold cranking amps (CCA) rating is 500 A at 0°F, and its reserve capacity (RES CAP) is 170 minutes at 80°F.\n\u003c\/p\u003e\n\n\u003ch3\u003eRecommended charging voltages\u003c\/h3\u003e\n\u003cp\u003e\n    For float service, recommended charging voltages are 13.5 to 13.8 V in float mode and 13.2 to 13.5 V in storage mode. For normal cyclic service, the absorption voltage is 14.2 to 14.6 V. Fast recharge in cycle mode is possible with an absorption voltage of 14.6 to 14.9 V, while float and storage voltages remain identical across all cyclic modes.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723837432148,"sku":"BAT412110081","price":241.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506608370004-1000.jpg?v=1783617185"},{"product_id":"victron-energy-batterie-agm-super-cycle-12v-60ah-m6","title":"AGM Super Cycle Battery 12V\/60Ah (M6)","description":"\u003cp\u003e\n    The \u003cstrong\u003eVictron Energy AGM Super Cycle 12V\/60Ah (M6)\u003c\/strong\u003e battery represents a significant advance in AGM battery technology, specifically designed for applications requiring repeated deep discharges. Based on the latest electrochemical innovations, this battery features positive plates less prone to softening, even after 100% depth of discharge cycles, and electrolyte additives that reduce sulfation. This design makes it a top choice for marine, mobile, and off-grid systems where deep-cycle reliability is critical.\n\u003c\/p\u003e\n\u003ch3\u003eExceptional performance and durability\u003c\/h3\u003e\n\u003cp\u003e\n    The Super Cycle battery delivers notable performance, capable of withstanding at least 300 cycles at 100% depth of discharge (DoD). This result is achieved through a rigorous testing protocol that includes daily discharge to 10.8V, followed by a two-hour rest period in a discharged state before recharging. This rest phase, which would damage most batteries in fewer than 100 cycles, highlights the superior resilience of the Super Cycle technology. For less extreme DoD levels, it achieves ≥ 700 cycles at 60% DoD and ≥ 1,000 cycles at 40% DoD, outperforming standard Victron Energy AGM batteries and many competitors in terms of cycle life.\n\u003c\/p\u003e\n\u003ch3\u003eOptimized design for integration\u003c\/h3\u003e\n\u003cp\u003e\n    With dimensions of 224 x 135 x 178 mm and a weight of 14 kg, the AGM Super Cycle 12V\/60Ah battery is slightly more compact and lighter than standard Victron Energy deep-cycle AGM batteries, making it easier to install in tight spaces. Its low internal resistance makes it particularly suitable for applications requiring high discharge currents, such as powering inverters, thrusters, or windlasses. The M6 terminals ensure a robust and reliable connection. Its nominal voltage is 12V, and its capacity is 60Ah (C20), 56Ah (C10), or 52Ah (C5). The nominal service life (design life) ranges from 7 to 10 years for a VRLA AGM battery, confirming its position as a durable investment.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723838677332,"sku":"BAT412060082","price":133.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506608730452-1000.jpg?v=1783617198"},{"product_id":"victron-energy-batterie-lithium-12-8v-330ah-smart-lifepo4","title":"12.8V\/330Ah Smart Lithium Battery","description":"\u003cp\u003e\n    Designed for demanding marine and off-grid applications, the Victron Energy Lithium 12.8V\/330Ah Smart battery (LiFePO4) provides an energy storage solution using lithium iron phosphate (LiFePO4) technology. This 12.8 V, 330 Ah battery includes cell balancing and monitoring, and communicates via Bluetooth, enabling real-time tracking of cell voltages, temperature, and alerts through the VictronConnect app.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and energy efficiency\u003c\/h3\u003e\n\u003cp\u003e\n    LiFePO4 technology delivers a round-trip energy efficiency of 92%, exceeding the 80% efficiency of lead-acid batteries. This efficiency is maintained even during shallow discharges, where lead-acid batteries can drop to 50%. The battery does not require systematic full charging, which extends its lifespan. It offers a lifespan of 2,500 cycles at 80% depth of discharge (DoD). The operating temperature range is wide, with a nominal capacity at -20 °C during discharge. The BMS stops charging if the temperature becomes too high or too low. The battery weighs 51 kg and is rated IP22.\n\u003c\/p\u003e\n\u003ch3\u003eSystem integration and scalability\u003c\/h3\u003e\n\u003cp\u003e\n    The Lithium 12.8V\/330Ah Smart battery is designed to be connected in series, parallel, or series\/parallel, allowing battery banks to be built for 12 V, 24 V, or 48 V systems. A system can integrate up to 20 batteries, reaching a storage capacity of 84 kWh in a 12 V configuration. It requires an external Battery Management System (BMS) to ensure protection against undervoltage (pre-alarm at 3.1 V per cell, load disconnection at 2.8 V per cell), overvoltage (charge stop at 3.75 V per cell), and extreme temperatures. Victron Energy offers six BMS solutions tailored to various applications. This 330 Ah version represents one of the highest capacities in the 12.8 V range of Victron Energy Lithium Smart batteries, providing superior autonomy compared to 12.8V\/200Ah or 12.8V\/180Ah models, while retaining the same smart monitoring and protection features.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723839267156,"sku":"BAT512132410","price":1537.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506609221972-1000.jpg?v=1783617211"},{"product_id":"victron-energy-batterie-lithium-lfp-smart-25-6v-100ah-ng","title":"Lithium battery LFP Smart 25.6V\/100Ah-a (2.56KWh) NG","description":"\u003cp\u003e\n    Designed for demanding marine and terrestrial energy systems, the Victron Energy Smart 25.6V\/100Ah-a (2.56kWh) NG lithium LFP battery represents the next generation of LiFePO4 energy storage. With a nominal voltage of 25.6 V and a capacity of 100 Ah (2.56 kWh), it is optimized for 24V installations, offering an alternative to the 12.8V and 51.2V models in the same NG range. This battery includes a shunt for transmitting voltage, current, and temperature data to an external battery management system (BMS).\n\u003c\/p\u003e\n\u003ch3\u003eSmart Integration and Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    The Lithium NG series stands out for its simplified integration and advanced monitoring. The BMS (Lynx Smart BMS NG 500 A\/1000 A, or other upcoming models), which is mandatory and sold separately, automatically manages all battery parameters, detecting system voltage and the number of batteries connected in parallel, series, or series\/parallel. A 24V battery bank can thus include up to 50 Lithium NG batteries, allowing a maximum storage capacity of 384 kWh. Real-time monitoring of parameters, including cell state and voltage, current, and temperature, is performed via the VictronConnect app, a GX communication hub, or the VRM portal. Battery firmware updates are also automatically managed by the BMS.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Lithium NG 25.6V\/100Ah-a battery features IP22 ingress protection, making it resistant to dust and low-pressure water jets, suitable for marine environments. Its self-discharge rate has been improved to a maximum of 2% per month at 25 °C, contributing to its longevity and reliability. The included mounting brackets simplify installation and ensure secure fastening. In terms of performance, it offers a round-trip efficiency of 92% and a lifespan of 2500 cycles at 80% depth of discharge, 3000 cycles at 70%, and 5000 cycles at 50%. The maximum continuous discharge is 100 A (1C), and the maximum continuous charge is 100 A (1C), with higher pulse currents for short durations. Its weight is 19 kg.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723839529300,"sku":"BAT524110620","price":1259.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506609451348-1000.jpg?v=1783602323"},{"product_id":"victron-energy-batterie-lithium-smart-25-6v-100ah","title":"Smart lithium battery 25.6V 100Ah","description":"\u003cp\u003e\n    Designed for demanding marine energy systems, the Victron Energy Smart 25.6V 100Ah lithium battery offers an energy storage solution based on Lithium Iron Phosphate (LiFePO4) technology. This chemistry is recognized for its robustness and tolerance to undercharge operating modes, extending useful life even with partial recharges. It supports a wide operating temperature range, ensuring stable performance in various environments. With a round-trip efficiency of 92%, it outperforms the average 80% efficiency of lead-acid batteries and maintains 90% efficiency even in shallow discharge conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem integration and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Smart 25.6V 100Ah battery can be connected in series, parallel, or series\/parallel, allowing the construction of battery banks for 12 V, 24 V, or 48 V systems. A single system can integrate up to 20 batteries, with a maximum energy storage capacity of 102 kWh for 24 V and 48 V systems. It includes cell balancing and monitoring. An external Battery Management System (BMS) is required for protection, managing load disconnection if cell voltage drops below 2.8 V, and charging shutdown if a cell voltage exceeds 3.75 V or in case of extreme temperature. Six BMS models are available from Victron Energy to suit various configurations.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and physical characteristics\u003c\/h3\u003e\n\u003cp\u003e\n    Positioned in Victron Energy’s Smart range, this 25.6V 100Ah battery offers a balance between capacity and footprint for 24 V installations. It differs from 12.8 V models by its nominal voltage, simplifying 24 V system architectures compared to assembling two 12.8 V batteries in series. It provides lower capacity than the 25.6V 200Ah version, making it suitable for intermediate energy needs. Integrated Bluetooth connectivity allows monitoring of cell voltages, temperature, and alarm status via the VictronConnect app. It weighs 32.5 kg, enabling space and weight savings of up to 70% compared to lead-acid batteries. The battery features IP22 protection.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723839693140,"sku":"BAT524110610","price":1312.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506609615188-1000.jpg?v=1783617216"},{"product_id":"victron-energy-batterie-lithium-smart-a-25-6v-200ah-energie-marine","title":"Smart-a lithium battery 25.6V 200Ah","description":"\u003cp\u003e\n    Designed for demanding marine applications, the \u003cstrong\u003eVictron Energy Smart-a 25.6V 200Ah lithium battery\u003c\/strong\u003e provides a high-performance and durable power solution. Using LiFePO4 (lithium iron phosphate) technology, it stands out for its high efficiency and long service life.\n\u003c\/p\u003e\n\u003ch3\u003eAdvantages of LiFePO4 technology\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike lead-acid batteries that suffer from sulfation when partially or deeply discharged, LiFePO4 batteries do not require a full charge cycle. Their lifespan is even optimized by partial charge cycles, making them suitable for solar or wind systems where a 100% charge is not always achievable. This technology also offers a wide operating temperature range, excellent cycle performance, low internal resistance, and high efficiency.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical performance and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    With a nominal voltage of 25.6 V and a capacity of 200 Ah at 25 °C (5120 Wh), this battery delivers 160 Ah at 0 °C and 100 Ah at -20 °C, ensuring stable performance across a wide discharge temperature range (-20 °C to +50 °C). Its round-trip energy efficiency reaches 92%, exceeding lead-acid batteries (80%). It supports a maximum continuous discharge current of 400 A and a maximum charge current of 400 A, with recommended values of ≤200 A for discharge and ≤100 A for charge. Internal resistance is 1.5 mΩ, and the end-of-discharge voltage is 22.4 V.\n\u003c\/p\u003e\n\u003ch3\u003eLifespan and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The battery offers a lifespan of 2500 cycles at 80% depth of discharge (DoD), up to 5000 cycles at 50% DoD. It includes cell balancing and monitoring. Bluetooth connectivity, via the VictronConnect app, enables real-time monitoring of cell voltages, temperature, and alarms. It is compatible with six \u003cstrong\u003eVictron Energy\u003c\/strong\u003e BMS (Battery Management System) models, essential for system management and protection, supporting up to 20 batteries for a maximum capacity of 102 kWh per BMS. The BMS connection uses a 50 cm male\/female cable with an M8 circular connector.\n\u003c\/p\u003e\n\u003ch3\u003eDimensions and certifications\u003c\/h3\u003e\n\u003cp\u003e\n    Its dimensions are 237 x 650 x 163 mm with a weight of 39 kg. It is rated IP22 and can be installed on its side. Power connection terminals are M8 threaded inserts. Cells comply with UL1973, IEC62619:2017, and UL9540A standards, and the battery meets IEC62619:2017 and IEC62620:2014 standards, as well as EMC EN-IEC 61000-6-3 and EN 55014-1. Within the \u003cstrong\u003eVictron Energy\u003c\/strong\u003e Smart lithium battery range, this 25.6V 200Ah model is positioned as a mid-capacity solution for 24V systems, balancing power and footprint, comparable to 12.8V 330Ah models in stored energy but optimized for 24V architectures.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723839988052,"sku":"BAT524120610","price":1744.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506609779028-1000.jpg?v=1783617223"},{"product_id":"victron-energy-battery-balancer-equilibrage-charge-24v-48v","title":"Battery Balancer","description":"\u003cp\u003e\n    The \u003cstrong\u003eVictron Energy Battery Balancer\u003c\/strong\u003e is an essential solution for optimizing the lifespan and performance of battery banks made up of 12V batteries connected in series, typically in 24V or 48V systems. Designed to prevent voltage imbalances that can lead to harmful overcharging or undercharging, this balancer ensures each battery maintains a uniform state of charge. It works by drawing up to 0.7A from the battery with the highest voltage, allowing all units to converge toward an identical state of charge.\n\u003c\/p\u003e\n\n\u003ch3\u003eOperation and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Battery Balancer activates automatically when the charging voltage of a 24V system exceeds 27.3V. It continuously monitors voltage deviation between batteries connected in series. A deviation of more than 50mV initiates the balancing process, with a 0.7A current when the deviation exceeds 100mV. For 48V systems, multiple balancers can be paralleled; for example, three units are recommended for a 48V battery bank. This parallel capability sets it apart from simpler balancers, offering flexibility for complex installations.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced safety and monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with overheat protection and an IP22 rating, the Battery Balancer is designed for reliable installation in marine or automotive environments, though not directly exposed to water spray. It features LED indicators for quick visualization of its operating state: green for activation, orange to signal an active deviation (\u0026gt;0.1V), and red for a critical alarm (\u0026gt;0.2V). A normally open alarm relay (60V \/ 1A) triggers in case of excessive deviation, enabling integration with a remote monitoring system. This relay can be reset via an external push button. For deeper management, the Battery Balancer is compatible with Victron BMV-702 battery monitors, which allow mid-point monitoring and customizable alarms for proactive prevention of imbalances.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723840184660,"sku":"BBA000100100","price":44.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506609942868-1000.jpg?v=1783602328"},{"product_id":"victron-energy-battery-protect-12-24v-100a-protection-batterie","title":"Battery Protect 12\/24V 100A","description":"\u003cp\u003e\n    Designed for battery protection, the Victron Energy Battery Protect 12\/24V 100A is an essential load-disconnect device for embedded systems. This Battery Protect automatically disconnects non-essential loads before the battery is fully discharged, preventing irreversible damage or insufficient power to start the engine. It can also serve as a charge switch to protect sensitive equipment from overvoltage, disconnecting the load if DC voltage exceeds 16V or 32V.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Features and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Battery Protect 12\/24V 100A automatically detects system voltage (12V or 24V) and offers simplified programming via a 7-segment LED display that indicates the selected setting. Current consumption is ultra-low, at just 1.5 mA in operation and 0.6 mA in standby or low-voltage cutoff mode, which is particularly relevant for Li-ion batteries. The device features flame-retardant protection via MOSFET switches, eliminating any risk of sparks. A special setting is available for Li-ion batteries, allowing direct control by an external BMS such as the VE.Bus BMS, and it can also be used as a charge switch between a battery charger and a Li-ion battery.\n\u003c\/p\u003e\n\u003ch3\u003eAlarm and Disconnection Management\u003c\/h3\u003e\n\u003cp\u003e\n    This Victron Energy device includes a timed alarm output that activates if battery voltage drops below the pre-set disconnect level for more than 12 seconds, preventing false alarms caused by engine start. Load disconnection is also timed at 90 seconds after alarm activation (immediate if triggered by the VE.Bus BMS), while reconnection occurs 30 seconds after battery voltage returns to the reconnection threshold. Default thresholds are 10.5V or 21V for disconnection and 12V or 24V for engagement. The electronics are rated IP67 (encapsulated in resin) for enhanced protection, and the device can operate at full load between -40°C and +40°C.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning in the Victron Energy Range\u003c\/h3\u003e\n\u003cp\u003e\n    The Battery Protect BP-100 (100A) is positioned as an intermediate solution within the Victron Energy BatteryProtect series, offering a higher continuous current capacity than the BP-65 (65A) and suitable for a wide range of applications, without reaching the power of the BP-220 (220A). Unlike the \u003ca href=\"#\"\u003eSmart BatteryProtect\u003c\/a\u003e, which offers Bluetooth connectivity, this model relies on programming via the \"PROG pin to GND pin\" method, providing a reliable alternative for installations where simplicity of configuration and robustness are prioritized over advanced communication features. It is critical to note that the Battery Protect is a unidirectional device, designed to manage current from the IN terminal (battery) to the OUT terminal (load) only, and is not suitable for reverse currents from direct charging sources. For inverters or charger\/inverters, it must be used to control their remote port and not directly inline in the DC circuit.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723840381268,"sku":"BPR000100400","price":48.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506610106708-1000.jpg?v=1783617229"},{"product_id":"victron-energy-battery-protect-12-24v-220a-protection-batterie","title":"Battery Protect 12\/24V 220A","description":"\u003cp\u003e\n    Designed to extend the lifespan of your batteries, the \u003cstrong\u003eBattery Protect 12\/24V 220A\u003c\/strong\u003e from VICTRON ENERGY disconnects non-essential loads before complete discharge or a level too low for engine start. This device automatically manages 12V or 24V system voltages and supports a maximum continuous charging current of 220A, with a peak current of 600A for 30 seconds. It differs from lower models such as the BP-65 (65A) and BP-100 (100A) by its ability to handle higher loads. A key distinction from the Smart BatteryProtect is its programming method via the PROG pin to GND, rather than a Bluetooth interface.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features and protection\u003c\/h3\u003e\n\u003cp\u003e\n    The Battery Protect 12\/24V 220A features a 7-segment LED display for simplified configuration of engagement and disengagement thresholds. It offers a specific mode for Li-ion batteries, allowing direct control via an external BMS such as the VE.Bus BMS or the Lynx Smart BMS, and can also function as a charging switch. Its current consumption is ultra-low, at 1.5 mA in operation and 0.6 mA in standby or low-voltage cut-off mode, a benefit for autonomous systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Overvoltage protection is integrated, disconnecting the load if DC voltage exceeds 16V (for a 12V system) or 32V (for a 24V system). The device uses MOSFET switches, ensuring spark-free operation and resistance to ignition. A timed alarm output activates after 12 seconds of low voltage, without nuisance triggering during engine start, and supports up to 50 mA. Load disconnection is also timed at 90 seconds (immediate if controlled by VE.Bus BMS), with reconnection after 30 seconds when voltage recovers. The Battery Protect 12\/24V 220A is rated IP67 for its electronics (potted) and IP00 for its connections, and is mounted with a torque of 9 Nm, weighing 0.8 kg with dimensions of 62 x 123 x 120 mm. It is important to note that this is a unidirectional device, designed for current flow from the input (battery) to the output (load) only, and is not suitable for reverse currents from charging sources.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723840577876,"sku":"BPR000220400","price":83.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506610303316-1000.jpg?v=1783617236"},{"product_id":"victron-energy-battery-protect-12-24v-65a","title":"Battery Protect 12\/24V 65A","description":"\u003cp\u003e\n    The Victron Energy Battery Protect 12\/24V 65A is designed to protect batteries from excessive discharge by disconnecting non-essential loads. It ensures the battery retains sufficient energy for engine starting, thereby extending its useful life.\n\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\n    This device automatically detects system voltage (12V or 24V). Programming is simplified via a 7-segment LED display, allowing thresholds for engagement and disengagement to be set. A specific configuration is available for Li-ion batteries, where the BatteryProtect can be controlled by an external BMS such as the VE.Bus BMS. It can also serve as a charging switch between a battery charger and a Li-ion battery.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and Protection\u003c\/h3\u003e\n\u003cp\u003e\n    With ultra-low current consumption (1.5 mA in operation, 0.6 mA when off or in low-voltage cut-off mode), the Battery Protect 65A is suitable for sensitive systems. It includes overvoltage protection, disconnecting the load if the DC voltage exceeds 16V (for a 12V system) or 32V (for a 24V system). The device uses MOSFET switches, making it spark-free and ignition-resistant. It handles a maximum continuous charge current of 65A and a peak current of 250A for 30 seconds. The electronics are encapsulated (IP67), while the connections are IP00.\n\u003c\/p\u003e\n\u003ch3\u003eAlert and Disconnection Management\u003c\/h3\u003e\n\u003cp\u003e\n    An alarm output is activated if the battery voltage drops below the predefined threshold for more than 12 seconds, preventing false alarms during engine start. This open-collector output is short-circuit protected, with a maximum current of 50 mA. Load disconnection is delayed by 90 seconds after alarm activation, and reconnection occurs 30 seconds after the battery voltage exceeds the reconnection threshold. Unlike the Smart BatteryProtect, this model is programmed using the PROG pin to GND method. It is a unidirectional device, managing current in only one direction at a time (toward a load or from a charger).","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723840840020,"sku":"BPR000065400","price":31.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506610467156-1000.jpg?v=1783617241"},{"product_id":"victron-energy-smartshunt-ip65-500a-controleur-batterie","title":"SmartShunt IP65 500A Battery Controller","description":"\u003cp\u003e\n    Designed for precise monitoring of battery status, the \u003cstrong\u003eSmartShunt IP65 500A\u003c\/strong\u003e battery monitor from VICTRON ENERGY is a compact solution without a built-in display. It uses your smartphone or tablet as a display interface via the VictronConnect app and a Bluetooth connection, providing access to state of charge, remaining time, historical data, and other essential battery parameters.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    This SmartShunt stands out for its ability to integrate into complex systems via its VE.Direct port, enabling direct connection to a GX device for centralized monitoring and management. It also features a versatile auxiliary input capable of monitoring the voltage of a second battery, the midpoint of a battery bank, or connecting to an optional temperature probe (ASS000100000). With a power supply range of 6.5 to 70 VDC and low current consumption (\u0026lt; 1mA), it is suitable for various 12V or 24V marine configurations.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccuracy and Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The 500A model of the SmartShunt ensures precise measurement with an accuracy of ±0.4 % for current and ±0.3 % for voltage. It is designed to operate in a temperature range of -40 to +50 °C. The shunt connection terminals are M10 type, ensuring a secure electrical connection. While the technical documentation lists an IP21 protection rating for the SmartShunt range, the specific model SHU050150050 is rated IP65, offering enhanced resistance to water and dust for marine environments. Its dimensions are 46 x 120 x 54 mm with a weight of 0.374 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eComparison with the BMV Range\u003c\/h3\u003e\n\u003cp\u003e\n    Compared to the BMV battery monitors from the same brand, the SmartShunt offers a simplified alternative, ideal for installations where wiring and space reduction are desired, including the absence of a dedicated display. It shares most essential monitoring features but lacks programmable visual and audible alarms or a programmable relay, making it relevant for users who prefer mobile app consultation or an existing GX system. It logs trends in voltage, current, state of charge, and auxiliary input, enabling in-depth analysis of battery history. Bluetooth range may be reduced by metallic elements or water, and connectivity optimization may be required in such cases.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723848868180,"sku":"SHU050150050","price":91.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506615284052-1000.jpg?v=1783617334"},{"product_id":"victron-energy-lynx-smart-bms-1000a-m10","title":"Lynx distributor 1000A, M10","description":"\u003cp\u003e\n    Designed as the most comprehensive Battery Management System (BMS) for Victron Lithium Battery Smart batteries, the \u003cstrong\u003eLynx Smart BMS 1000A, M10\u003c\/strong\u003e from Victron Energy provides advanced energy management and essential protection. This module integrates within the Lynx Distributor system, offering a centralized solution for marine and off-grid installations requiring high current capacity. It is available in 500 A and 1000 A versions, with the latter being the model presented here, designed for demanding configurations.\n\u003c\/p\u003e\n\n\u003ch3\u003eBuilt-in Capabilities and Safety\u003c\/h3\u003e\n\u003cp\u003e\n    The Lynx Smart BMS 1000A integrates a main 1000 A continuous contactor (1200 A peak for 5 minutes) that serves as a secondary safety mechanism to protect the battery in case of primary control failure. This contactor also functions as a remotely controllable main system switch. An integrated pre-charge circuit prevents high inrush currents when connecting capacitive loads such as MultiPlus or Quattro MultiPlus\/Quattro inverters-chargers, eliminating the need for an external pre-charge circuit. The system supports 12 V, 24 V, or 48 V voltages and can manage up to 20 Victron Lithium Battery Smart batteries, enabling a maximum energy storage capacity of 84 kWh at 12 V and up to 102 kWh at 24 V or 48 V.\n\u003c\/p\u003e\n\n\u003ch3\u003eMonitoring and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Monitoring and control of the Lynx Smart BMS is performed via Bluetooth with the VictronConnect app or via a GX device such as the Cerbo GX, with access to the VRM portal. An integrated battery monitor provides real-time data such as state of charge, voltage, current, and history. The Instant Readout feature enables quick diagnostics without an active connection. The system supports DVCC closed-loop control for compatible Victron solar chargers and inverters\/chargers, as well as ATC\/ATD contacts for managing external loads and chargers. A programmable relay offers alarm or alternator control functions. Communication is via VE.Can (RJ45) and NMEA 2000, facilitating integration into marine networks and data display on compatible MFDs. The module also monitors up to four connected Lynx Distributors and their fuses, providing full system visibility. For increased robustness, the parallel redundancy function allows up to five Lynx Smart BMS units to be connected to form a single redundant battery system. The ABS enclosure and tinned copper busbars are designed for use in demanding environments, with IP22 protection class and an operating temperature range from -40 °C to +60 °C.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723852079444,"sku":"LYN060102010","price":173.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506617446740-1000.jpg?v=1783602539"},{"product_id":"victron-energy-batterie-superpack-lithium-12v-200ah","title":"SuperPack Battery 12.8V 200Ah","description":"\u003cp\u003e\n    Designed for marine applications requiring substantial autonomy, the \u003cstrong\u003eVictron Energy\u003c\/strong\u003e SuperPack 12.8 V 200 Ah lithium battery (SKU: BAT512120705) provides an energy storage solution with integrated management.\n\u003c\/p\u003e\n\u003ch3\u003eIntegrated management system and performance\u003c\/h3\u003e\n\u003cp\u003e\n    Its internal battery management system (BMS) protects against overcharging, deep discharge, and extreme temperatures, ensuring automatic disconnection when limits are exceeded. With a nominal capacity of 200 Ah at 25 °C and an energy rating of 2560 Wh, this battery delivers a maximum continuous discharge current of 70 A and a peak current of 100 A for 10 seconds. Its round-trip energy efficiency of 92 % surpasses lead-acid batteries, which typically reach around 80 %. Its lifespan is estimated at 2500 cycles at 80 % depth of discharge (DoD) and 25 °C. Unlike lead-acid batteries, it does not suffer premature degradation from partial charges or deficit operation.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and positioning in the range\u003c\/h3\u003e\n\u003cp\u003e\n    The 12.8\/200 model is designed for simplified installation, requiring no additional external components. It can be connected in parallel to increase capacity, but series connection is not permitted. Operating temperatures are -20 °C to +50 °C for discharge and 0 °C to +45 °C for charging, with automatic charge cutoff below 0 °C for recent models (from serial number HQ2040). Equipped with M8 connection terminals, its dimensions are 208 x 520 x 269 mm for a weight of 21 kg. Within the \u003cstrong\u003eSuperPack\u003c\/strong\u003e range from \u003cstrong\u003eVictron Energy\u003c\/strong\u003e, which includes 12.8 V models (20 Ah, 60 Ah, 100 Ah) and 25.6 V models (50 Ah), the 12.8 V 200 Ah is positioned as the most powerful 12 V option in terms of capacity, suitable for high energy demands without requiring a complex battery bank.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723852538196,"sku":"BAT512120705","price":900.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-Lithium-SuperPack-12V-200Ah-front-angle.jpg?v=1778606256"},{"product_id":"victron-energy-smart-bms-cl-12-100-gestion-batterie","title":"Smart BMS CL 12-100","description":"\u003cp\u003e\n    Designed for 12 V systems equipped with an alternator, the \u003cstrong\u003eSmart BMS CL 12-100\u003c\/strong\u003e by \u003cstrong\u003eVictron Energy\u003c\/strong\u003e is an all-in-one battery management system (BMS) dedicated to Victron Smart 12.8 V lithium batteries. It provides protection and monitoring of each individual cell, managing up to 20 batteries for a maximum storage capacity of 84 kWh in a 12 V system. Specifically adapted for vehicles and boats, this BMS includes essential protection for the alternator and batteries.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated Protection and Current Limitation\u003c\/h3\u003e\n\u003cp\u003e\n    The Alternator\/Starter Batt+ port of the \u003cstrong\u003eSmart BMS CL 12-100\u003c\/strong\u003e features electronic current limitation at approximately 90% of the fuse rating. For example, with a 100 A fuse, the input current is limited to about 90 A. This function protects the alternator from overload, preventing overheating and failure of 12 V alternators during prolonged operation at full power. It also prevents the lithium battery from excessive charging currents. The current flow is unidirectional, preventing discharge from the lithium battery to the starter battery.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Monitoring and Control Features\u003c\/h3\u003e\n\u003cp\u003e\n    This BMS is equipped with a load disconnection and charging current disconnection output, allowing it to cut off DC charging sources or consumers in case of low\/high cell voltage or excessive temperature. A pre-alarm output can activate a relay, LED, or sound alarm before battery disconnection. The remote on\/off terminal allows interrupting charging via the alternator port or disabling the system entirely. Configuration and monitoring are performed via the VictronConnect app and Bluetooth, providing instant readings of key values for quick diagnostics.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723860959572,"sku":"BMS110022000","price":134.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-accessory-BMS110022000-Smart-BMS-CL-12-100-accessories.jpg?v=1778604007"},{"product_id":"victron-energy-indicateur-charge-bmv-712-smart-bluetooth","title":"BMV-712 Smart","description":"\u003cp\u003e\n    Designed for comprehensive monitoring of battery banks, the \u003cstrong\u003eBMV-712 Smart\u003c\/strong\u003e battery monitor from \u003cstrong\u003eVICTRON ENERGY\u003c\/strong\u003e features Bluetooth connectivity for simplified management and control via the VictronConnect app. This allows customization of settings, viewing of key data on a single screen, access to history, and software updates for the monitor directly from a smartphone or tablet, integrating the BMV-712 Smart into the Victron Energy Internet of Things (IoT) ecosystem.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and advanced features\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the \u003cstrong\u003eBMV-712 Smart\u003c\/strong\u003e is simplified by a quick-connect printed circuit board on the shunt. The monitor connects to the shunt via a standard 10-meter RJ12 telephone cable, and a 2-meter battery cable with fuse is also included. The kit includes a separate front panel for square or round screen appearance, a mounting ring for rear installation, and screws for front mounting. The device is rated IP55, indicating protection against dust and water jets, but is not intended for direct outdoor use.\n\u003c\/p\u003e\n\u003cp\u003e\n    This monitor stands out for its ability to monitor mid-point voltage of batteries connected in series, a critical function to prevent premature failure of an expensive bank due to a faulty cell or battery. To maximize the lifespan of series-connected lead-acid batteries, using a battery balancer such as the \u003cstrong\u003eVICTRON ENERGY\u003c\/strong\u003e BMS012201000 is recommended. The \u003cstrong\u003eBMV-712 Smart\u003c\/strong\u003e has extremely low current consumption, less than 1 mA (0.7 Ah per month at 12 V and 0.6 Ah per month at 24 V), which is particularly important for Li-ion batteries where deep discharge can cause irreversible damage. A bistable alarm relay is integrated, preventing increased current draw during an alarm.\n\u003c\/p\u003e\n\u003ch3\u003eMonitoring and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eVICTRON ENERGY BMV-712 Smart\u003c\/strong\u003e provides essential data such as battery voltage, current, power, consumed amp-hours, state of charge (SoC), and remaining time at current discharge rate. It offers programmable visual and audible alarms, as well as a programmable relay to cut non-critical loads or start a generator. The included 500 A quick-connect shunt has a shunt selection capacity up to 10,000 A. A VE.Direct communication port is present for integration with other Victron Energy equipment, such as GX devices (Color Control GX, Venus GX), enabling centralized monitoring and data storage on the VRM portal. The device stores a wide range of historical events, allowing evaluation of usage patterns and battery health. It accepts a wide input voltage range of 6.5 to 70 V and offers high current measurement resolution of 10 mA (0.01 A). An auxiliary input can measure the voltage of a second battery, temperature, or mid-point voltage, with corresponding alarm and relay settings. Measurement accuracy is ±0.4% for current and ±0.3% for voltage.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723861549396,"sku":"BAM030712000","price":133.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506625474900-1000.jpg?v=1783602787"},{"product_id":"victron-energy-lynx-distributeur-1000-dc-m8-systeme-barre-omnibus","title":"Lynx 1000 DC M8 distribution block","description":"\u003cp\u003e\n    Designed for complex DC electrical distribution systems, the \u003cstrong\u003eVictron Energy Lynx 1000 DC M8 distribution block\u003c\/strong\u003e is a key component of the Lynx modular busbar system. It integrates a positive busbar and a negative busbar. The positive section provides four connections protected by \u003cstrong\u003eMEGA fuses\u003c\/strong\u003e (to be purchased separately) with a fuse status monitoring function. The negative section has four connections and one ground connection.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and monitoring in the Lynx system\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eVictron Energy Lynx 1000 DC M8 distribution block\u003c\/strong\u003e stands out for its seamless integration into a \u003cstrong\u003eVictron Energy\u003c\/strong\u003e ecosystem. Supplied with a 40 cm RJ10 cable, it powers the module and transmits data. When connected to a \u003cstrong\u003eLynx Smart BMS\u003c\/strong\u003e, up to four Lynx distribution blocks can send information about their fuse status. This data is accessible via the \u003cstrong\u003eVictronConnect\u003c\/strong\u003e app or a \u003cstrong\u003eGX device\u003c\/strong\u003e, such as a Cerbo GX, enabling local or remote monitoring via the VRM portal. This feature is not available if the distribution block is connected to a \u003cstrong\u003eLynx Shunt VE.Can\u003c\/strong\u003e.\n\u003c\/p\u003e\n\u003ch3\u003ePosition in the Lynx range\u003c\/h3\u003e\n\u003cp\u003e\n    Within the Lynx distribution system, this module serves as an essential solution for DC circuit protection and management. It complements other modules such as the \u003cstrong\u003eLynx Power In\u003c\/strong\u003e (a simple busbar without fuses), the \u003cstrong\u003eLynx Class-T Power In\u003c\/strong\u003e (for class T fuses), the \u003cstrong\u003eLynx Shunt VE.Can\u003c\/strong\u003e (with shunt and battery monitoring), and the \u003cstrong\u003eLynx Smart BMS\u003c\/strong\u003e (for lithium batteries with integrated contactor and management). The \u003cstrong\u003eVictron Energy Lynx 1000 DC M8 distribution block\u003c\/strong\u003e features M8 busbar connections, compatible with M8 fuse and cable connections, ensuring mechanical and electrical consistency for high-performance installations requiring reliable and monitored distribution.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723861746004,"sku":"LYN060102000","price":164.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506625638740-1000.jpg?v=1783602793"},{"product_id":"victron-energy-lynx-shunt-ve-can-1000a-moniteur-batterie-busbar","title":"Lynx Shunt VE.Can 1000A","description":"\u003cp\u003e\n    The Victron Energy \u003cstrong\u003eLynx Shunt VE.Can 1000A\u003c\/strong\u003e is a central component of the Lynx distribution system, designed for precise battery monitoring and main circuit protection. Integrating a positive and negative busbar, a battery monitor, and a main fuse holder, it provides a consolidated solution for DC power management. This M10 model allows for a continuous current capacity of 1000 A and supports system voltages of 12, 24, or 48 V.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and communication\u003c\/h3\u003e\n\u003cp\u003e\n    This shunt communicates via VE.Can with Victron Energy GX devices, such as the Cerbo GX, for comprehensive monitoring and configuration. VE.Can communication ensures seamless integration into existing Victron systems, enabling access to battery data via the VRM portal for remote management. The module ships with two VE.Can RJ45 terminators to facilitate connection.\n\u003c\/p\u003e\n\n\u003ch3\u003eFlexibility and protection\u003c\/h3\u003e\n\u003cp\u003e\n    The M10 model of the \u003cstrong\u003eLynx Shunt VE.Can 1000A\u003c\/strong\u003e stands out for its flexibility, including a dummy busbar that allows the main fuse to be positioned outside the shunt—a useful feature for systems requiring fuse ratings too large for the internal slot. It is compatible with CNN, ANL, or Mega fuses (sold separately), while the M8 version is limited to CNN fuses. This modularity makes it a versatile component compared to other Lynx modules, such as the Lynx Power In for simple connections, the Lynx Distributor with its four fuse connections, or the Lynx Smart BMS which integrates lithium battery management. The Lynx Shunt VE.Can M10 offers IP22 protection and operates within a temperature range of -40 °C to +60 °C.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723861909844,"sku":"LYN040102100","price":338.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506625769812-1000.jpg?v=1783617523"},{"product_id":"mastervolt-batterie-agm-12-160ah-stockage-energie","title":"AGM battery 12 V 160 Ah","description":"\u003cp\u003e\n    The \u003cstrong\u003eMASTERVOLT AGM Battery 12\/160Ah\u003c\/strong\u003e (reference 62001600) is a robust and versatile energy storage solution designed to meet the demands of marine and mobile applications. With a nominal voltage of 12 V and a capacity of 160 Ah (C20), this type 4D battery uses AGM (Absorbed Glass Mat) technology for enhanced performance and reliability.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced AGM Technology for Maximum Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    MASTERVOLT’s AGM technology features an electrolyte fully absorbed in glass fibers, making the battery maintenance-free and non-gassing under normal operating conditions. This allows flexible installation in various environments, including confined spaces, without requiring specific ventilation. The thicker plate design ensures excellent resistance to deep discharges, significantly extending battery lifespan even under moderate cycling.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Versatility for Your Power Needs\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAGM Battery 12\/160Ah\u003c\/strong\u003e excels at delivering high currents quickly, making it ideal for engine starting, thrusters, windlasses, and powering onboard electronic equipment. It provides cold-starting performance (CCA) of 870 A per SAE standards and 550 A per DIN standards. Its reserve capacity of 351 minutes ensures reliable autonomy for service systems. Thanks to its low internal resistance, optimized by fiberglass technology, it offers superior charge and discharge efficiency. The removable M8 type A terminals ensure compatibility with all standard battery terminals for easy installation. Compared to traditional flooded lead-acid batteries, this AGM battery delivers starting power comparable to, or even greater than, a flooded lead-acid battery with a much higher nominal capacity—such as the equivalence between an AGM 12\/90 Ah and a flooded lead-acid battery of 180 Ah.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Usage Recommendations\u003c\/h3\u003e\n\u003cp\u003e\n    With dimensions of 485 x 170 x 242 mm (LxWxH) and a weight of 42.3 kg, the \u003cstrong\u003eMASTERVOLT AGM Battery 12\/160Ah\u003c\/strong\u003e is built for durability. For optimal performance, it must be charged with an IUoUo charger, with a floating voltage of 13.80 V at 25°C and an absorption voltage of 14.25 V at 25°C (max. 5 hours), with a recommended temperature compensation of -30mV\/°C. The maximum charging current is 45 A (approximately 30% of the C10 capacity). It operates within an acceptable temperature range of -20 to 55°C, with a recommended nominal temperature of 25°C. A two-year warranty accompanies this product, underscoring its commitment to quality and durability.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723861942612,"sku":"62001600","price":304.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506625802580-1000.jpg?v=1783617529"},{"product_id":"victron-energy-lynx-smart-bms-500-m8-lithium-batterie-bms","title":"Lynx Smart BMS 500 (M8)","description":"\u003cp\u003e\n    The Victron Energy \u003cstrong\u003eLynx Smart BMS 500 (M8)\u003c\/strong\u003e is an advanced battery management system (BMS) designed specifically for Victron Lithium Battery Smart batteries. Positioned as the most comprehensive and feature-rich option in Victron’s BMS range, it integrates seamlessly into the Lynx distribution system. This BMS centralizes the management, protection, and monitoring of your lithium iron phosphate (LiFePO4) battery bank for 12 V, 24 V, or 48 V systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated protection and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLynx Smart BMS 500 (M8)\u003c\/strong\u003e includes a 500 A continuous (600 A peak for 5 minutes) main safety contactor, acting as a secondary protection system in case of failure of primary controls (ATC, ATD, and\/or DVCC). It also serves as the main system switch, controllable remotely. An integrated pre-charge circuit prevents high inrush currents when connecting capacitive loads such as MultiPlus\/Quattro or other inverters, eliminating the need for an external pre-charge circuit. The integrated battery shunt controller provides real-time data such as state of charge (SOC), voltage, current, and history, similar to other Victron Energy battery controllers.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced communication and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Monitoring and control of the \u003cstrong\u003eLynx Smart BMS 500 (M8)\u003c\/strong\u003e is performed via the VictronConnect app via Bluetooth or a GX device (such as a Cerbo GX) and the VRM portal for remote supervision. Its VE.Can compatibility allows easy connection (standard RJ45 network cable) to a GX device. The CAN-bus protocol, based on NMEA 2000, ensures easy integration into marine networks, enabling transmission of BMS data to marine multifunction displays (MFD) via a VE.Can to NMEA 2000 micro-C male cable. The DVCC (Distributed Voltage and Current Control) function enables automatic control of compatible Victron inverters\/chargers and solar chargers via a connected GX device. ATC\/ATD contacts are also available to control third-party chargers and loads with a remote on\/off port.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdditional features for optimal management\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLynx Smart BMS 500 (M8)\u003c\/strong\u003e offers a programmable relay that can be configured as an alarm relay (with pre-alarm) or to control an alternator via its external regulator. An AUX terminal provides auxiliary power (1.1 A at system voltage) for specific loads, such as a GX device, even after the BMS has shut off loads due to low cell voltage. It also monitors fuses for up to 4 Lynx distributors connected via VictronConnect or a GX device. The \u003cstrong\u003eLynx Smart BMS 500 (M8)\u003c\/strong\u003e is distinguished by its M8 busbar connection.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723862073684,"sku":"LYN034160200","price":857.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506625933652-1000.jpg?v=1783617535"},{"product_id":"mastervolt-batterie-agm-12v-55ah","title":"12 V 55 Ah AGM battery","description":"\u003cp\u003e\n    The Mastervolt AGM 12\/55Ah battery (reference 62000550) is a maintenance-free 12V energy storage solution designed for marine and mobile applications requiring both high cranking power and moderate cycling capacity. Thanks to its AGM (Absorbed Glass Mat) technology, the electrolyte is absorbed into glass fibers, eliminating gassing under normal conditions and allowing flexible installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical performance and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    This battery delivers a nominal voltage of 12V and a capacity of 55Ah (C20). It stands out with excellent cranking capability, providing a current of 250A per DIN standard and 400A per SAE standard. Its low internal resistance, enabled by the glass-fiber technology, ensures rapid discharge at high currents, making it ideal for engine starting. Thicker plates contribute to extended service life. The compact dimensions of 257 x 132 x 200 mm (LxWxH) and a weight of 17 kg facilitate installation. M6\/type A terminals are removable for compatibility with all standard battery terminals.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimized installation, charging, and maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    The Mastervolt AGM 12\/55Ah battery is ready for use. It can be installed in any position (vertical position recommended) and does not require specific ventilation under normal use, though adequate ventilation is required in case of overcharging. A distance of more than 1 cm between batteries and keeping them away from heat sources are recommended. The operating temperature range is –20 to 55°C, with a nominal temperature of 5 to 35°C (25°C recommended for optimal service life).\n\u003c\/p\u003e\n\u003cp\u003e\n    For charging, use chargers with an IUoUo characteristic, with a floating voltage of 13.80V and an absorption voltage of 14.25V (at 25°C, max. 5 hours). A temperature compensation of –30mV\/°C is recommended. The maximum charging current is 15.3A, corresponding to 30% of the nominal C10 capacity. It is crucial to recharge the battery to 100% at least once per month to avoid damage from incomplete charging.\n\u003c\/p\u003e\n\u003cp\u003e\n    Regarding discharge, deep discharges beyond 50% of the nominal capacity should be avoided to preserve service life. The battery must be recharged immediately after each discharge and never discharged below its final discharge voltage. This battery is maintenance-free, requiring no addition of acid or distilled water, and comes with a two-year warranty.\n\u003c\/p\u003e\n\n\u003ch3\u003eProduct positioning: versatility and reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The Mastervolt AGM 12\/55Ah battery positions itself as a superior alternative to traditional flooded lead-acid batteries, particularly for marine applications. It combines the advantages of a powerful starting battery with moderate cycling capability, distinguishing it from batteries purely dedicated to starting. For reference, an AGM 12\/90Ah battery from the Mastervolt range can equal a flooded lead-acid battery of 180Ah in terms of cranking power; the 12\/55Ah offers remarkable performance in its category. Its robust design and low self-discharge make it reliable for systems requiring constant and secure power supply without the maintenance constraints of older technologies.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723862106452,"sku":"62000550","price":133.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506625966420-1000.jpg?v=1783617540"},{"product_id":"victron-energy-lynx-smart-bms-500-ng-m10-systeme-gestion-batterie","title":"Lynx Smart BMS 500 NG (M10)","description":"\u003cp\u003e\n    The \u003cstrong\u003eLynx Smart BMS 500 NG (M10)\u003c\/strong\u003e from Victron Energy is an advanced battery management system (BMS) designed specifically for Victron’s lithium NG (next-generation) batteries. It is the most feature-rich and comprehensive BMS option available for this series of lithium-iron-phosphate (LiFePO4) batteries, offering seamless integration with the Lynx distribution system and M10 products. This BMS ensures optimal management and protection against deep discharge and overcharging for battery banks configured at 12 V, 24 V, or 48 V, with a maximum energy storage capacity of 192 kWh at 12 V and up to 384 kWh at 24 V or 48 V. It supports connections for up to 50 12 V or 24 V batteries, and up to 25 48 V batteries, with the ability to parallel multiple Lynx Smart BMS NG units for increased capacity and system redundancy.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated safety and control\u003c\/h3\u003e\n\u003cp\u003e\n    This BMS includes a 500 A continuous (600 A peak for 5 minutes) safety contactor that acts as a secondary safety mechanism, protecting the battery in case of primary control failure (ATC, ATD, or DVCC). It can also be used as the main system switch, controllable remotely. An integrated precharge circuit prevents excessive inrush currents when connecting capacitive loads such as inverters, eliminating the need for external precharge devices. The \u003cstrong\u003eLynx Smart BMS 500 NG (M10)\u003c\/strong\u003e features a battery controller that provides real-time monitoring of state of charge (SoC), voltage, current, and historical data, accessible via the VictronConnect app or a GX device such as the Cerbo GX, with instant readings for quick diagnostics.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLynx Smart BMS 500 NG (M10)\u003c\/strong\u003e communicates via Bluetooth for configuration and diagnostics with VictronConnect, and via VE.Can for integration with GX devices and the VRM portal. It supports the NMEA 2000 protocol, facilitating integration into marine networks to supply multifunction displays (MFD) with data. It provides ATC\/ATD contacts for controlling external chargers and consumers, as well as a programmable relay for alarm or alternator control functions. Compared to the standard Lynx Smart BMS (non-NG), this version is specifically optimized for Victron Lithium NG batteries, supporting a higher number of batteries and greater maximum energy capacity while maintaining M10 compatibility for seamless integration with the Lynx distribution system. The AUX port supplies 1.1 A auxiliary power to keep critical devices, such as a GX device, powered even after a low cell voltage event.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723862204756,"sku":"LYN034160310","price":621.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f553110f-6456-4f59-ab3d-019907dca4c8.jpg?v=1778609318"},{"product_id":"mastervolt-batterie-agm-12-90ah-marine","title":"12 V 90 Ah AGM battery","description":"\u003cp\u003e\n    The \u003cstrong\u003eMASTERVOLT AGM 12\/90Ah battery\u003c\/strong\u003e is an energy storage solution designed for demanding marine applications, offering a high-performance alternative to traditional flooded lead-acid batteries. Thanks to its AGM (Absorbed Glass Mat) technology, the electrolyte is fully absorbed into the fiberglass, ensuring maintenance-free operation and no gas release during normal use. This design allows flexible installation in any environment, with a recommended vertical position and spacing of more than 1 cm between batteries, away from heat sources.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This MASTERVOLT battery stands out for its excellent rapid discharge capacity at high currents, making it ideal for engine starting or systems requiring high currents. It delivers starting power equivalent to a 180 Ah flooded lead-acid battery, with a nominal capacity (C20) of 90 Ah. Its technical specifications include a DIN CCA of 360 A and an SAE CCA of 570 A. The low internal resistance, due to the fiberglass technology, optimizes power delivery. Thicker plates contribute to extended service life, while the two-year warranty attests to its reliability.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimal installation and maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the AGM 12\/90Ah battery is simplified by removable M8 \/ type A terminals, compatible with all standard battery terminals. For optimal connection, direct mounting of the cable lug onto the battery post is recommended after removing the pole adapter. A recommended tightening torque of 14.7 to 19.6 Nm ensures secure connections. The battery operates within a temperature range of -20 to 55°C, with a nominal temperature of 5 to 35°C; 25°C is recommended for maximum longevity. For charging, use of chargers with an IUoUo characteristic is mandatory, with a floating voltage of 13.80 V and an absorption voltage of 14.25 V at 25°C, as well as temperature compensation (-30 mV\/°C) and a maximum charging current of 30% of the C10 capacity. Deep discharges beyond 50% of the nominal capacity should be avoided to preserve service life. Regular connection checks and maintaining charge (recharge if open-circuit voltage drops below 12.3 V) are essential for maintenance.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723862434132,"sku":"62000900","price":190.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506626195796-1000.jpg?v=1783617546"},{"product_id":"mastervolt-batterie-agm-6v-400ah","title":"6 V 400 Ah AGM battery","description":"\u003cp\u003e\n    The \u003cstrong\u003eMastervolt AGM Battery 6\/400Ah\u003c\/strong\u003e is an energy storage solution designed for demanding marine applications. This 6-volt AGM (Absorbed Glass Mat) battery offers a nominal capacity of 400 Ah (C20), with the electrolyte absorbed in fiberglass, ensuring maintenance-free operation and no gas release during normal use. Its robust design allows for versatile installation and rapid discharge at high currents, making it ideal for systems requiring high power, particularly for engine starting.\n\u003c\/p\u003e\n\n\u003ch3\u003eAGM Technology and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    AGM batteries, like this \u003cstrong\u003eMastervolt 6\/400Ah\u003c\/strong\u003e, stand out for their ability to deliver high currents. With a cold cranking amperage (CCA) of 620 A (DIN) and 1100 A (SAE), it provides reliable power. The maximum charging current is 110 A. The battery terminals are type A with an M10 thread, compatible with standard battery terminals, facilitating integration into 12V, 24V, or 48V configurations. Weighing 53 kg and measuring 295 x 180 x 428 mm, it offers an alternative in terms of placement and footprint compared to traditional batteries.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimal Installation and Maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMastervolt AGM Battery 6\/400Ah\u003c\/strong\u003e must be installed in a vertical position, with at least 1 cm of space between batteries and kept away from heat sources. The operating temperature range is –20 to 55°C, with a recommended nominal temperature of 25°C to optimize lifespan. The recommended torque for connections is 16.0 to 20.5 Nm. For charging, it is imperative to use chargers with an IUoUo characteristic, with floating voltage settings at 6.90V and absorption at 7.13V (at 25°C), with recommended temperature compensation. Regular recharges to 100% are essential to preserve battery lifespan, which is guaranteed for two years.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723862696276,"sku":"61004000","price":419.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506626392404-1000.jpg?v=1783617563"},{"product_id":"mastervolt-batterie-agm-6v-260ah","title":"6 V 260 Ah AGM battery","description":"\u003cp\u003e\n    The \u003cstrong\u003e6V 260Ah MASTERVOLT AGM battery\u003c\/strong\u003e is a proven energy storage solution for marine and onboard applications. Designed with AGM (Absorbent Glass Mat) technology, it offers a sealed, maintenance-free alternative to traditional lead-acid batteries while remaining a cost-effective and reliable option compared to newer lithium-ion (LiFePO4) technologies. With a nominal voltage of 6V and a capacity of 260Ah, this battery is ideal for series configurations to achieve 12V or 24V systems, providing flexibility for various electrical architectures.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    MASTERVOLT AGM batteries are supplied ready for use and require no maintenance, such as adding acid or distilled water, thanks to their sealed valves that must never be opened. Their robust design allows for vertical installation and requires a minimum spacing of \u003e1 cm between units for optimal heat dissipation. The operating temperature range is –20 to 55°C, with a recommended nominal temperature of 25°C to maximize service life. A tightening torque of 16.0 to 20.5 Nm is recommended for screw connections, ensuring reliable and secure electrical conductivity.\n\u003c\/p\u003e\n\n\u003ch3\u003eCharging and discharging recommendations\u003c\/h3\u003e\n\u003cp\u003e\n    For optimal longevity, the \u003cstrong\u003e6V 260Ah MASTERVOLT AGM battery\u003c\/strong\u003e must be charged exclusively with chargers featuring an IUoUo characteristic. Recommended voltage settings are 6.90V for float charging and 7.13V for absorption charging (max 5 hours), both at 25°C. A temperature compensation of –15mV\/°C is highly recommended. The maximum charging current must not exceed 30% of the nominal capacity C10. It is essential to recharge the battery to 100% at least once a month and avoid deep discharges beyond 50% of the nominal capacity, as this can significantly reduce service life. After each discharge, immediate recharging is recommended, without ever dropping below the final discharge voltage.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and durability\u003c\/h3\u003e\n\u003cp\u003e\n    Safety is a priority with this battery. Although the electrolyte is highly corrosive, contact is impossible under normal operating conditions due to its sealed housing. In the event of overcharging, an explosive hydrogen gas mixture may be emitted, requiring adequate ventilation if the batteries are installed in a confined space. \u003cstrong\u003eMASTERVOLT AGM 6V 260Ah batteries\u003c\/strong\u003e are heavy (35.5 kg), which necessitates the use of appropriate handling equipment and secure mounting. It is essential to avoid short-circuiting the terminals and to use insulated tools. The internal composition consists mainly of solid lead (50-70%) and sulfuric acid (5-15%). At end of life, these batteries must be collected and recycled separately due to their potential impact on health and the environment.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723862860116,"sku":"61002600","price":256.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506626556244-1000.jpg?v=1783617569"},{"product_id":"mastervolt-batterie-lithium-mli-ultra-12-3000-230ah","title":"MLI Ultra 12\/3000 Lithium Battery","description":"\u003cp\u003e\n    The \u003cstrong\u003eMASTERVOLT MLI Ultra 12\/3000 Lithium Battery\u003c\/strong\u003e (part number 66013000) is a high-performance energy storage solution designed specifically for marine applications and demanding electrical systems. Part of Mastervolt’s MLI Ultra range, which also includes the 12\/6000 and 24\/6000 models, this 12 V, 230 Ah battery is a robust choice for service battery banks requiring reliable energy and long service life. It outperforms traditional batteries by offering three times the lifespan and a significant reduction in size and weight, up to 70 %.\n\u003c\/p\u003e\n\n\u003ch3\u003eExceptional performance and longevity\u003c\/h3\u003e\n\u003cp\u003e\n    Based on Lithium Iron Phosphate (LiFePO4) technology, the MLI Ultra 12\/3000 delivers a nominal energy capacity of 3000 Wh. Its design ensures a lifespan of 3500 cycles at 80 % depth of discharge (DOD) at an ambient temperature of 25 °C, with a recommended maximum charge rate of C\/3 (≤ 80 A) and a recommended discharge rate of C\/2 (≤ 120 A). It supports a maximum charge current of 230 A and a continuous discharge current of up to 200 A, with peak discharge currents of 1800 A for 10 seconds. Its low initial internal resistance of 3.52 mΩ ensures high energy efficiency. The battery maintains performance across a wide operating and storage temperature range, from -25 °C to 50 °C, and features a self-discharge rate of less than 4 % per month at 20 °C.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and integrated management\u003c\/h3\u003e\n\u003cp\u003e\n    At the core of the \u003cstrong\u003eMLI Ultra 12\/3000\u003c\/strong\u003e is a proprietary Battery Management System (BMS). This BMS ensures precise voltage balancing across each individual cell and continuously monitors their temperature to prevent failure. It includes protections against overvoltage, undervoltage, and overheating, ensuring safe operation. An external safety relay is required for this battery (e.g., the Mastervolt 7700B-BSS for 12 V systems), adding a critical safety layer by physically isolating the battery bank in any critical situation. The BMS’s self-learning balancing algorithm optimizes charge cycles and extends the battery’s overall lifespan.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMLI Ultra 12\/3000\u003c\/strong\u003e battery is designed for seamless integration into modern marine electrical systems. It communicates via MasterBus, CZone, and NMEA2000 protocols, enabling precise monitoring of state of charge (SOC) and consumed Ah, as well as automated charging cycles with compatible chargers and alternators. This advanced connectivity, absent in more basic batteries, maximizes charging efficiency and simplifies system diagnostics. It can be connected in parallel without limit or in series up to 10 batteries (for systems beyond 48 V, a separate battery box is required), offering flexibility for various configurations.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust design and simplified installation\u003c\/h3\u003e\n\u003cp\u003e\n    With dimensions of 341 x 197 x 355 mm and a weight of 25.4 kg, the \u003cstrong\u003eMLI Ultra 12\/3000\u003c\/strong\u003e features a robust, watertight enclosure with an IP65 rating for its electronic housing, making it resistant to marine environments and shocks. Its M8 terminals and \"plug-and-play\" design simplify installation, which is recommended in a vertical position but can also be mounted on its long side. An integrated thermal heating pad ensures optimal charging performance even at sub-zero temperatures. The battery is CE, E-Mark, RVIA, UN38.3, and UL1642 (for cells) certified, attesting to its compliance with international safety and quality standards.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723863023956,"sku":"66013000","price":1925.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_2746afdc-c697-44fe-abdf-29953f8aab1c.jpg?v=1778084053"},{"product_id":"victron-energy-shunt-500a-50mv-moniteur-batterie-bluetooth-vedirect","title":"SmartShunt 500A\/50mV","description":"\u003cp\u003e\n    The \u003cstrong\u003eVictron Energy SmartShunt 500A\/50mV shunt\u003c\/strong\u003e is an all-in-one battery monitoring solution designed for systems requiring precise tracking without the bulk of a dedicated display. It differs from counterparts like the BMV-712 battery monitor by lacking an integrated display, programmable visual\/sound alarms, and a programmable relay, thus offering simplified installation and reduced wiring. Data access is via the VictronConnect app on a smartphone or tablet, connected via Bluetooth, displaying state of charge, remaining autonomy, and history.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and flexibility of the SmartShunt\u003c\/h3\u003e\n\u003cp\u003e\n    This \u003cstrong\u003eSmartShunt 500A\/50mV\u003c\/strong\u003e features a VE.Direct port for seamless integration with Victron GX devices, enabling centralized system management. Its versatile auxiliary input can monitor the voltage of a second battery (such as a starter battery), the midpoint of a battery bank, or connect an optional temperature sensor (ASS000100000). This flexibility makes it a key component for optimized monitoring of complex battery banks.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical performance and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eVictron Energy SmartShunt 500A\/50mV shunt\u003c\/strong\u003e operates within a supply voltage range of 6.5 to 70 VDC with current consumption below 1 mA. It supports battery capacities from 1 to 9999 Ah and functions in a temperature range of -40 to +50°C. Its compact dimensions (46 x 120 x 54 mm) and M10 connection bolts facilitate integration. It offers a measurement accuracy of ±0.01 A for current and ±0.01 V for voltage, with an IP21 protection rating for the standard version, and an IP65 version is available for harsher environments. The device compensates for the Peukert effect and improves charging efficiency by sharing data with connected chargers via VE.Smart Networking.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723863187796,"sku":"SHU500050100","price":20.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_0b26e2d0-187d-4a2f-99ed-48e4b9fcd6e4.jpg?v=1778607803"},{"product_id":"mastervolt-batterie-lithium-mli-ultra-12-6000-lifepo4-460ah","title":"MLI Ultra 12\/6000 Lithium Battery","description":"\u003cp\u003eThe \u003cstrong\u003eMLI Ultra 12\/6000 lithium battery\u003c\/strong\u003e from \u003cstrong\u003eMastervolt\u003c\/strong\u003e is a high-performance energy storage solution designed for demanding marine environments. Using Lithium Iron Phosphate (LiFePO4) technology, it delivers maximum safety while reducing weight and footprint by up to 70 % compared to traditional lead-acid batteries. With a nominal voltage of 12 V and an impressive capacity of 460 Ah, it provides a nominal energy output of 6000 Wh, meeting the demands of the most power-hungry onboard systems.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and intelligent management\u003c\/h3\u003e\n\u003cp\u003eEquipped with an integrated Battery Management System (BMS), the MLI Ultra 12\/6000 ensures active cell balancing and real-time monitoring of critical parameters such as voltage, current, and temperature. It supports a maximum charge current of 460 A and a recommended continuous discharge current of up to 300 A (with peaks of 1800 A for 10 seconds), enabling ultra-fast recharging and powering high-demand equipment. Its exceptional lifespan reaches 3500 cycles at a Depth of Discharge (DoD) of 80 % at 25 °C. Unlike the lower-capacity MLI Ultra 12\/3000 models, this 6000 Wh version is ideal for main battery banks on large vessels.\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced integration and connectivity\u003c\/h3\u003e\n\u003cp\u003eNetwork integration is central to the design of the MLI Ultra 12\/6000. It seamlessly communicates via MasterBus, CZone, and NMEA 2000 protocols, facilitating integration into modern energy management systems. The electronic enclosure features an IP65 protection rating, ensuring resistance to dust and water spray. The battery allows unlimited parallel connections and series connections of up to 10 units, offering exceptional modularity for creating custom battery banks ranging from 12 V to over 48 V (with the required isolation precautions for high voltage). The use of an external safety relay (ref. 7700B-BSS) is mandatory to ensure complete protection against overvoltage, undervoltage, and overheating.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723863253332,"sku":"66016000","price":3864.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506626949460-1000.jpg?v=1783602799"},{"product_id":"victron-energy-smart-battery-protect-12-24v-220a","title":"Smart Battery Protect 12\/24V-220A","description":"\u003cp\u003e\n    Designed for protecting marine and mobile electrical systems, the \u003cstrong\u003eSmart Battery Protect 12\/24V-220A\u003c\/strong\u003e from VICTRON ENERGY (reference BPR122022000) is an intelligent circuit breaker. It protects batteries from excessive discharge, preventing potential damage and ensuring sufficient power for engine starting. This model stands out from the standard BatteryProtect range with its integrated Bluetooth connectivity, allowing simplified programming of on\/off thresholds via the VictronConnect app, in addition to the nine predefined levels accessible via the programming pin.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Smart BatteryProtect 12\/24V-220A automatically detects system voltage (12V or 24V) during initial power-up. It offers a maximum continuous charging current of 220A, with a peak current of 600A sustained for 30 seconds, positioning it as the most powerful model in the Smart BatteryProtect series, above the 65A and 100A versions. The operating voltage range spans from 6V to 35V. Its power consumption is particularly low, at 1.4 mA when Bluetooth is active and 0.9 mA when shutdown occurs due to low voltage, a critical feature for lithium-ion battery installations.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced protection and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    This device includes overvoltage protection, disconnecting the load if DC voltage exceeds 16.3V (for a 12V system) or 32.6V (for a 24V system), protecting sensitive equipment. Using MOSFET transistors instead of relays makes it spark-proof. An alarm output is triggered after 12 seconds if battery voltage drops below the disconnection threshold, preventing false alarms caused by engine start. Load disconnection occurs after 90 seconds, with reconnection after 30 seconds if voltage recovers. The Smart BatteryProtect can be configured for lithium-ion batteries and controlled by an external VE.Bus BMS, acting as a charge switch between a charger and a lithium-ion battery. The electronics are IP67 protected (resin-sealed), while connections are IP00. It is supplied with a pre-assembled negative DC cable connector.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723863744852,"sku":"BPR122022000","price":94.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506627047764-1000.jpg?v=1783617577"},{"product_id":"mastervolt-batterie-lithium-mli-ultra-24v-6000wh-230ah","title":"MLI Ultra 24\/6000 lithium battery","description":"\u003cp\u003eThe Mastervolt MLI Ultra 24\/6000 (ref. 66026000) is a 24 V LiFePO4 lithium battery designed for demanding marine service battery banks. It provides a capacity of 230 Ah, approximately 6.0 kWh, in a rugged housing with native MasterBus, CZone, and NMEA 2000 communication.\u003c\/p\u003e\u003cp\u003eThis battery features an advanced BMS, high discharge capacity, and a design suited for marine and mobile environments. For cycle life data, refer to the manufacturer's test conditions, including depth of discharge and temperature.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723863810388,"sku":"66026000","price":4289.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506627113300-1000.jpg?v=1783617582"},{"product_id":"victron-energy-solidswitch-104-interrupteur-statique","title":"SolidSwitch 104","description":"\u003cp\u003e\n    The \u003cstrong\u003eSolidSwitch 104\u003c\/strong\u003e by \u003cstrong\u003eVictron Energy\u003c\/strong\u003e is a solid-state switch designed to switch continuous DC loads up to 70V\/4A. It stands out for its ability to be controlled by a low-power digital signal (3.3V \u003c Vin \u003c 70V), offering flexibility for integration into various embedded systems. This device is compatible with resistive, capacitive, or inductive loads, such as power contactor coils, with maximum capacities specified by voltage (e.g., 1000 µF up to 15V) and current (e.g., 1000 mH up to 1A).\n\u003c\/p\u003e\n\n\u003ch3\u003eMinimal Parasitic Consumption for Lithium Systems\u003c\/h3\u003e\n\u003cp\u003e\n    The main advantage of the SolidSwitch 104 lies in its extremely low current consumption, around 0.04 Ah per month. This feature is critical for lithium battery systems, where reducing parasitic loads is essential to preserve autonomy. For comparison, a small electromechanical relay can consume between 10 and 22 Ah per month, representing a 250-fold reduction in consumption with the SolidSwitch 104. This performance makes it a preferred solution over traditional relays for energy-sensitive applications.\n\u003c\/p\u003e\n\n\u003ch3\u003eStrategic Applications and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The SolidSwitch 104 is ideal for several key applications. It can control an external alternator regulator, such as those from Balmar or Mastervolt Alpha Pro, within a Victron lithium system, in response to a BMS alarm. It can also be used to switch low-power DC loads, such as lighting, or to increase the number of chargers that can be connected to the ATC (allow-to-charge) output of a Victron BMS. Its robust ABS matte black design and IP20 protection rating ensure reliability in an operating environment from -20 to +50°C.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723863908692,"sku":"BMS800200104","price":35.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506627211604-1000.jpg?v=1783602805"},{"product_id":"mastervolt-batterie-mli-ultra-12-1250-lithium-100ah","title":"Ultra Lithium MLI Battery 12 V 1.25 kWh","description":"\u003cp\u003e\n    The \u003cstrong\u003eMASTERVOLT MLI Ultra Lithium 12\/1250 battery\u003c\/strong\u003e (part number 66011250) represents the pinnacle of lithium-ion technology for demanding marine environments. Designed to deliver extreme performance, it integrates high-quality Lithium Iron Phosphate (LiFePO4) cells and a proprietary battery management system (BMS) in a robust, fully sealed enclosure (IP65). This combination ensures maximum reliability against high charge\/discharge currents, moisture, mechanical shocks, and vibrations, far surpassing the durability of traditional lead-acid batteries.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced technology and management\u003c\/h3\u003e\n\u003cp\u003e\n    The sophisticated BMS of the \u003cstrong\u003eMLI Ultra 12\/1250\u003c\/strong\u003e optimizes the use of each individual cell through a predictive self-balancing algorithm. This system anticipates cell behavior and proactively balances them, enabling faster and more efficient charging cycles while extending battery lifespan. With a nominal voltage of 12V and a capacity of 100 Ah (1250 Wh), this battery delivers a maximum continuous discharge current of 200 A (2C) and a peak current of 500 A (5C for 10 seconds), making it suitable for applications requiring high instantaneous power. It is designed to provide 3,500 cycles at an ambient temperature of 25 °C and a defined DoD of 80 %.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimized performance in all conditions\u003c\/h3\u003e\n\u003cp\u003e\n    To ensure maximum charging performance even in freezing conditions, the \u003cstrong\u003eMLI Ultra 12\/1250\u003c\/strong\u003e is equipped with an integrated thermal heating pad and intelligent low-temperature control. This system uses power from the connected charger to maintain cell temperature above 0 °C, ensuring fast charging and full power capabilities even at -20 °C. Its integrated battery cut-off, based on intelligent algorithms, disconnects cells in case of anomalies (overvoltage, undervoltage, overcurrent, overheating, low SoC), while maintaining continuous power delivery up to 200 amperes—where other systems might limit current. It is certified UN 38.3, CE, E-Mark, FCC, UL1973, and RVIA.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and ease of installation\u003c\/h3\u003e\n\u003cp\u003e\n    System integration is simplified by MasterBus, CZone, and NMEA2000 compatibility, enabling seamless communication with Mastervolt chargers and other equipment. The \"plug-and-play\" function allows automatic configuration with any compatible Mastervolt charger, simplifying installation without requiring complex configuration tools. With dimensions of 330 x 173 x 210 mm and a weight of 15 kg, the \u003cstrong\u003eMLI Ultra 12\/1250\u003c\/strong\u003e is an instant replacement for Group 31 and Group 49 batteries (85-90 Ah), offering up to 70 % space and weight savings and a lifespan three times longer than traditional lead-acid batteries. It can be connected in series up to 48V and fully recharges in 60 minutes with a suitable charger (recommended charging current ≤ 50 A, max. 100 A).\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723864006996,"sku":"66011250","price":1250.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506627277140-1000.jpg?v=1783617587"},{"product_id":"mastervolt-batterie-mli-ultra-lithium-24-1250-1-25kwh-nautique","title":"MASTERVOLT MLI Ultra Lithium 24\/1250 - 1.25 kWh","description":"\u003cp\u003e\n    The \u003cstrong\u003eMASTERVOLT MLI Ultra Lithium 24\/1250\u003c\/strong\u003e is a robust 24V lithium-ion (LiFePO4) battery with a nominal capacity of 50Ah and an energy rating of 1250 Wh. Designed for demanding marine environments, it delivers reliable performance even under high charge\/discharge currents, humidity, mechanical shocks, and vibrations. This battery is a premium energy solution that outperforms traditional batteries in durability with over 3500 cycles at 80% DoD and up to 70% weight and space savings compared to lead-acid batteries. It is part of the MLI Ultra series, known for extreme performance and reliability.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced technology and management\u003c\/h3\u003e\n\u003cp\u003e\n    At the core of the MLI Ultra 24\/1250 is a proprietary and sophisticated battery management system (BMS). This BMS ensures optimal use of each LiFePO4 cell, includes a proactive auto-balancing algorithm for faster and more efficient charging cycles, and provides precise monitoring of key parameters such as voltage, current, state of charge (SoC), and remaining time. For enhanced safety, an integrated battery disconnect cuts off cells in case of anomalies (overvoltage, undervoltage, overheating, low SoC), maintaining continuous discharge capacity up to 100 A (2C) and a peak current of 250 A for 10 seconds.\n\u003c\/p\u003e\n\n\u003ch3\u003eCold-weather optimized performance\u003c\/h3\u003e\n\u003cp\u003e\n    A major advantage of the \u003cstrong\u003eMLI Ultra 24\/1250\u003c\/strong\u003e is its integrated thermal heating pad, controlled by the BMS to optimize charging at freezing temperatures. When cell temperature drops below 0°C, the system uses energy from the connected charger to heat the battery to 5°C, ensuring fast charging and full power capabilities even in winter conditions. This feature sets it apart from standard lithium batteries, whose charging performance can be severely reduced or blocked by cold, a notable competitive advantage over less integrated solutions.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    Connectivity is a strong point of the MLI Ultra 24\/1250, integrating NMEA2000, CZone, and MasterBus communications. This enables full integration into the vessel's electrical system and plug-and-play configuration with compatible Mastervolt chargers, simplifying installation without requiring additional configuration tools. It can be configured in series up to 48V and features robust M8 battery terminals, as well as various mounting options (mounting brackets, side retention for Group 31\/49). Its IP65 protection rating ensures total waterproofing, essential for marine environments, and it is certified UN 38.3, CE, E-Mark, FCC, UL1973, and RVIA.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723864236372,"sku":"66021250","price":1179.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506627473748-1000.jpg?v=1783617593"},{"product_id":"victron-energy-ve-bus-bms-gestion-batterie-lifepo4","title":"VE.Bus BMS","description":"\u003cp\u003e\n    The Victron Energy \u003cstrong\u003eVE.Bus BMS\u003c\/strong\u003e is a battery management system designed to protect individual cells of Victron lithium-fer-phosphate (LiFePO4 or LFP) batteries against overvoltage, undervoltage, and overheating. Compatible with 12 V, 24 V, and 48 V systems, it integrates with Victron LiFePO4 batteries equipped with BTV (balancing, temperature and voltage monitoring) via M8 circular connectors, allowing chaining of multiple BTVs. This BMS enables the creation of battery banks up to five units in parallel and four in series, supporting for example a 48 V bank up to 1500 Ah.\n\u003c\/p\u003e\n\n\u003ch3\u003eCommunication and system protection\u003c\/h3\u003e\n\u003cp\u003e\n    This BMS communicates with MultiPlus, Quattro inverters\/chargers, and Phoenix inverters via a standard UTP RJ45 cable, with an operating voltage range of 9 to 70 V DC. It ensures system safety by disconnecting loads in case of imminent cell undervoltage and by reducing charging current or disconnecting battery chargers in case of overvoltage or overheating. For non-VE.Bus products, it features dedicated outputs: a load disconnection output (max 2 A) and a charger disconnection output (max 10 mA), plus a pre-alarm output (max 1 A) that activates 30 seconds before load disconnection.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eVE.Bus BMS\u003c\/strong\u003e is designed to protect Victron LiFePO4 batteries in 12 V, 24 V, and 48 V systems and communicates with MultiPlus, Quattro inverters\/chargers, and Phoenix inverters via a standard UTP RJ45 cable. Blue and red LEDs indicate operating status and alerts (cell \u003e 4 V or temperature, cell \u003e 2.8 V). Its matte black ABS housing, with IP20 protection rating, weighs 0.1 kg and measures 105 x 78 x 32 mm, providing a compact solution for installation in protected environments.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723864400212,"sku":"BMS300200000","price":106.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_84ab7b8b-d069-4f1a-a5ac-929d737740cc.jpg?v=1778609460"},{"product_id":"mastervolt-batterie-agm-12v-225ah-group-8d-demarrage","title":"AGM Battery 12 V 225 Ah (Group 8D)","description":"\u003cp\u003eThe Mastervolt AGM 12\/225 (group 8D) battery is a high-performance 12 V, 225 Ah energy storage solution designed for demanding marine environments. Using AGM (Absorbent Glass Mat) technology, the electrolyte is fully absorbed into the glass fiber, making this battery completely maintenance-free and free of any gas emissions during normal use. This design allows for safe installation in any onboard space without requiring complex ventilation.\u003c\/p\u003e\n\u003ch3\u003eStarting and cycling performance\u003c\/h3\u003e\n\u003cp\u003eEngineered to deliver very high discharge currents, this battery provides a cold cranking amps (CCA) rating of 1080 A (SAE) and 680 A (DIN). It is particularly well-suited for starting large marine engines or powering bow thrusters. Unlike traditional flooded lead-acid batteries, the glass fiber technology offers extremely low internal resistance. The use of thicker lead plates also ensures excellent durability for moderate cyclic use. For comparison, an AGM Mastervolt battery delivers starting power equivalent to a flooded lead-acid battery with nearly double the capacity, positioning this 225 Ah model as a superior alternative to market standards such as Victron Energy’s AGM ranges.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications and installation\u003c\/h3\u003e\n\u003cp\u003eWith dimensions of 522 x 240 x 224 mm and a weight of 63.5 kg, this group 8D battery fits perfectly in large service or starting battery banks. It accepts a maximum charging current of 63 A via IUoUo-characteristic chargers. The M8-type (type A) terminals are removable and compatible with all standard battery terminals. To optimize its service life, it is recommended to maintain a float voltage of 13.80 V and an absorption voltage of 14.25 V at 25°C, with temperature-compensated charging.","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723877048660,"sku":"62002250","price":474.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_e642a5c7-deb4-4510-9981-6bb8028d3fb1.jpg?v=1778053412"},{"product_id":"mastervolt-batterie-agm-12v-270ah-super-8d","title":"12 V AGM battery 270 Ah","description":"\u003cp\u003eThe Mastervolt AGM 12\/270Ah battery is designed to meet the highest energy demands aboard vessels. Thanks to its Absorbent Glass Mat (AGM) technology, the electrolyte is fully captive, making this battery completely sealed, maintenance-free, and free of gas emissions during normal use. With a nominal capacity of 270 Ah (C20) and a voltage of 12 V, it provides a massive energy reserve for service banks while delivering exceptional starting performance, capable of delivering a cold cranking current (CCA) of 1200 A (SAE).\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and comparison with flooded lead-acid\u003c\/h3\u003e\n\u003cp\u003eMastervolt’s AGM technology features an extremely low internal resistance, allowing rapid discharges at very high currents. For comparison within the range, a 90 Ah AGM battery delivers the same starting power as a 180 Ah flooded lead-acid battery. This 270 Ah model effectively replaces bulky wet battery banks, offering a longer lifespan thanks to thick plates suited for moderate cyclic use and demanding engine starts.\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and installation aboard\u003c\/h3\u003e\n\u003cp\u003eWeighing 73 kg and measuring 522 x 268 x 226 mm (Super 8D format), this battery is designed for robust installation. It can be mounted in any position (though vertical is recommended) and accepts a maximum charging current of 76.5 A. M8 (Type A) threaded terminals ensure optimal electrical contact and can be combined with standard battery terminals for easy integration into any 12 V or 24 V marine electrical system.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723877278036,"sku":"62002700","price":569.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506637861204-1000.jpg?v=1783617804"},{"product_id":"mastervolt-batterie-agm-slimline-12v-185ah-m6","title":"AGM-SlimLine 12 V 185 Ah battery","description":"\u003cp\u003eDesigned to meet space constraints on board, the \u003cstrong\u003eMastervolt AGM-SlimLine 12\/185Ah battery\u003c\/strong\u003e is a universal energy solution. Unlike standard AGM batteries in the standard range, this model features an ultra-flat design that allows optimal integration in tight bilges while providing dual start and service functions.\u003c\/p\u003e\u003ch3\u003eCompressed AGM technology and compactness\u003c\/h3\u003e\u003cp\u003eThanks to its compressed AGM technology, this battery offers a 15% volume and weight reduction compared to traditional models. Its specific dimensions (560 x 126 x 280 mm) for a weight of 51.2 kg allow installing two 185 Ah units in the exact footprint of a single standard 200 Ah battery. As the electrolyte is fully absorbed in the fiberglass, it requires no maintenance and releases no gas during normal use, enabling installation in confined spaces.\u003c\/p\u003e\u003ch3\u003eElectrical performance and versatility\u003c\/h3\u003e\u003cp\u003eDelivering 12V with a nominal capacity of 185 Ah (C20), it accepts a maximum charge current of 53 A via an IUoUo charge profile. Its ability to handle rapid discharge at very high currents results in a cold cranking amperage (CCA) reaching 930 A (SAE) and 580 A (DIN), making it ideal for starting large marine engines or powering bow thrusters. It is equipped with M6 terminals ensuring reliable tightening with a recommended torque of 3.9 to 5.4 Nm.","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723877409108,"sku":"63001850","price":408.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506637992276-1000.jpg?v=1783617810"},{"product_id":"mastervolt-batterie-gel-mvg-12-200ah","title":"Gel Battery MVG 12 V 200 Ah","description":"\u003cp\u003eThe Mastervolt MVG 12\/200 Gel battery is a reliable power source designed for service banks in medium and large 12 V and 24 V systems. With a nominal capacity of 200 Ah (C20) and a voltage of 12 V, this battery uses a technology where the electrolyte is absorbed in gel form. This design makes it fully sealed, maintenance-free, and prevents gas formation during normal use, allowing safe installation in unventilated spaces aboard your boat.\u003c\/p\u003e\n\u003ch3\u003ePerformance for intensive cyclic use\u003c\/h3\u003e\n\u003cp\u003eDesigned to withstand a high number of charge and discharge cycles, the MVG 12\/200 battery offers an extremely long lifespan compared to open lead-acid batteries or even standard AGM batteries on the market. It accepts a maximum charging current of 100 A (50 % of its capacity), ensuring rapid recharging via your alternator or shore power charger. Its starting capabilities are also notable with a DIN CCA of 630 A and an SAE CCA of 1100 A. To maximize its longevity, it is recommended to limit regular discharges to 60 % of its nominal capacity.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications and installation\u003c\/h3\u003e\n\u003cp\u003eThis service battery weighs 70 kg and has dimensions of 518 x 274 x 238 mm. It is equipped with type A terminals. Optimal operation is ensured at a recommended temperature of 20°C, with a tolerance range from -20°C to 45°C. Charging requires a charger with an IUoUo curve, set to 13.80 V in float mode and 14.25 V in absorption mode at 25°C. Compared to other technologies in the Mastervolt range, the Gel MVG series stands out as the most robust solution for repeated deep discharges and offers very low self-discharge during winter storage.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723877638484,"sku":"64002000","price":721.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506638221652-1000.jpg?v=1783617816"},{"product_id":"mastervolt-batterie-mvg-gel-12v-55ah-servitude","title":"MVG gel battery 12 V 55 Ah","description":"\u003cp\u003eThe \u003cstrong\u003eMastervolt MVG gel 12V\/55Ah battery\u003c\/strong\u003e is a high-performance energy storage solution specifically designed for marine auxiliary battery banks. Thanks to its advanced technology where the electrolyte is fully absorbed in gel form, this battery is completely maintenance-free and releases no gas during normal use. Unlike traditional lead-acid batteries or some AGM batteries that require strict ventilation, the MVG range offers total flexibility and can be installed in any confined space aboard.\u003c\/p\u003e\n\u003ch3\u003eCyclic performance and fast charging\u003c\/h3\u003e\n\u003cp\u003eIdeal for medium to large 12V or 24V systems, this unit offers a nominal capacity of 55Ah (C20). It stands out for its ability to withstand intensive cyclic use with a high number of charge and discharge cycles. Additionally, it accepts a maximum charging current of 27.5A (50% of its nominal capacity), enabling exceptionally fast recharging compared to market standards. Its extremely low self-discharge rate also ensures excellent performance during layup periods.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications and integration\u003c\/h3\u003e\n\u003cp\u003eWeighing 19 kg with compact dimensions of 261 x 136 x 230 mm, it is equipped with standard A-type terminals. Although optimized for auxiliary use, it delivers a cold cranking amperage (CCA) of 380A per SAE standard (230A DIN). To ensure an extremely long service life, it must be paired with a charger featuring an IUoUo characteristic (absorption voltage at 14.25V and float at 13.80V at 25°C) with recommended temperature compensation. Installation is secure: it can be mounted vertically or horizontally (excluding the short side).\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723877966164,"sku":"64000550","price":223.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506638516564-1000.jpg?v=1783617822"},{"product_id":"mastervolt-battman-pro-controleur-batterie-12-24v-ip65","title":"BattMan Pro. Battery Controller","description":"\u003ch3\u003ePrecise monitoring with the BattMan Pro battery monitor from Mastervolt\u003c\/h3\u003e\n\u003cp\u003eThe Mastervolt BattMan Pro battery monitor is a high-precision measurement instrument designed for 12V and 24V DC systems. Unlike the Lite version, the Pro model displays the estimated remaining time and retains a detailed history of specific battery events. With its IP65-rated 64 mm diameter waterproof display, it integrates perfectly on a navigation console while resisting demanding marine environments. It allows monitoring of two battery banks simultaneously: full monitoring for the service bank (voltage, current, ampere-hours, capacity) and voltage monitoring for the starter battery.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical performance and installation\u003c\/h3\u003e\n\u003cp\u003eThis monitor comes with a 500 A \/ 50 mV shunt, ensuring current measurement accuracy of ± 0.4 % and voltage accuracy of ± 0.3 %. Its very low power consumption (8 mA at 12 V with backlight off) preserves your energy reserves. It includes a configurable potential-free alarm contact to alert you in case of undervoltage or critical capacity. Although it is not compatible with the MasterBus network (unlike the MasterShunt or EasyView display), the BattMan Pro stands as an extremely reliable standalone solution, directly competing with models such as the Victron BMV-712, with a clear and universal interface.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723878097236,"sku":"70405070","price":159.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_9ee2332d-4b8b-4aaa-9c8b-d4da232b485e.jpg?v=1778053667"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/dbb97a40613ec5f4fee70b2725e44dff.png?v=1779967732","url":"https:\/\/skysat.fr\/en-tr\/collections\/storage.oembed","provider":"Skysat","version":"1.0","type":"link"}