Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Humminbird

XPLORE12-XDTP

XPLORE 12 Touchscreen Combo - XD-Side Mount Plastic Transducer + Temp

The Humminbird XPLORE 12 touchscreen combo features a 12-inch display for navigation and sonar. It includes a plastic through-hull transducer with temperature sensor and integrates via NMEA 2000 and Ethernet.

Supplied with the XPLORE 12 control unit, its bracket mount, a 2 m power cable, and a plastic through-hull transducer with temperature sensor.

Retail priceBenefit from the professional rate

2.774,17€

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Detailed description

The Humminbird XPLORE 12 touchscreen combo is a complete solution for navigation and underwater detection, featuring a 12-inch touchscreen. This model comes with a side-mount plastic transducer, equipped with a temperature sensor, providing detailed detection of seabeds and submerged structures. Designed for reliable system integration, it delivers the tools required for optimized navigation experience.

Flexible installation and mounting

The XPLORE 12 combo is designed for versatile installation, with options for gimbal mount or overhead mounting. The mounting process involves securing the gimbal mount bracket to a stable surface protected from excessive shocks and vibrations. Sufficient space is required for cable routing and to allow the screen’s tilt range. 31.75 mm (1 1/4") holes are needed for cable pass-through, ideally located 50 to 100 mm (2" to 4") behind the chosen mounting location. For overhead installations or on thin panels, additional hardware may be required for secure mounting.

Power and network connectivity

The XPLORE 12 combo must be connected to a 12 VDC power supply and requires a 5A fuse (slow-blow type or equivalent MDL). A 2 m (6 ft) power cable is included and can be extended using 12 AWG multistrand copper wire for extensions of 1 to 12 ft, or 10 AWG for extensions of 12 to 24 ft. It is recommended to connect the unit to the boat’s fuse panel or directly to the battery, ensuring minimal interference with other marine electronics. The combo features ports for optional accessory integration, Ethernet cables, and an NMEA 2000® port, enabling expansion and networking with compatible devices.

System configuration and verification

After physical installation, commissioning the system involves initial setup via the integrated configuration guide, allowing language preferences, measurement units, time, and date to be defined. System verification is essential to confirm proper GPS reception (Enhanced Fix or 3D Fix) and display of position coordinates. Connected accessories are also listed to ensure detection. A final sonar test completes the transducer installation, preparing the XPLORE 12 combo for use at sea.

Documentation

Type	Nom
	Humminbird — guide d'installation tete de commande XPLORE (FR/EN)

Expert opinion

« Technical analysis: Installation and integration of the Humminbird XPLORE 12 XDTP »

The Humminbird XPLORE 12 combined unit, with its plastic through-hull transducer and integrated temperature sensor, is an all-in-one solution for recreational boaters and anglers seeking a clear, responsive interface for navigation and fish detection. Its 12-inch screen size is ideal for displaying multiple data sets simultaneously, such as charts, the fishfinder, and engine data, without compromising readability.

Installing this type of combined unit requires careful attention to power management to avoid interference. It is critical to ensure a stable power source, ideally separate from high-consumption equipment such as electric trolling motors. Mounting options—bracket or overhead—offer installation flexibility, but sufficient space must be planned for cable routing and to allow full screen tilt range. Dielectric grease is highly recommended for connections in splash-prone areas to prevent corrosion.

Integration of a precise GPS (Enhanced Fix or 3D Fix) and the ability to diagnose accessories directly from the control unit simplify commissioning and maintenance. NMEA 2000 and Ethernet compatibility enable easy expansion of the system with other Humminbird or third-party equipment, providing valuable scalability for future needs. While high-performing, it is important to note that this device should not be the sole navigation aid to prevent collisions, especially in shallow waters or near underwater obstacles. Constant operator vigilance remains essential.

Payment and security

Your payment information and data are processed securely.

XPLORE 12 Touchscreen Combo - XD-Side Mount Plastic Transducer + Temp

2.774,17€

Frequently Asked Questions

Need help? Contact us

How to install the XPLORE 12 touchscreen display on my boat?

The XPLORE 12 display can be installed using a gimbal mount or an overhead mount. The installation guide provides detailed instructions for both methods.

For gimbal mounting, the bracket is fixed to a stable surface, then the control head is secured to it. For overhead mounting, the bracket is flipped and fixed to the top of the control head. Note that thin or overhead panels may require additional hardware (purchased separately) for secure mounting. A 31.75 mm (1 1/4") cable hole is required, located 50 to 100 mm (2" to 4") behind the chosen mounting location.

What are the power supply requirements for the XPLORE 12 display unit?

The XPLORE 12 display unit must be connected to a 12 VDC power supply. A 5 A "slow-blow" fuse or equivalent MDL type is required to protect the device.

A 2 m (6 ft) power cable is included. If an extension is required, refer to the following table for the recommended wire gauge:

1 to 6 ft: 12 AWG
6 to 12 ft: 12 AWG
12 to 24 ft: 10 AWG
If you have a trolling motor, it is recommended to keep the power sources for the display unit and the motor as separate as possible to minimize interference.

Which type of transducer is included with the XPLORE 12 display unit and what are its specifications?

The XPLORE 12-XD display unit is supplied with a plastic through-hull transducer. This transducer also includes a temperature sensor.

Detailed instructions for installing the transducer are provided in the separate transducer installation guide supplied with the product.

Which actions could void the warranty of my XPLORE 12 integrated instrument?

The warranty on your XPLORE 12 display unit will be void if the electronic unit is disassembled or repaired by unauthorized service personnel. Likewise, any alteration of the serial number or any attempt to repair the original equipment or accessories by unauthorized individuals will void the warranty.

What is the screen size and type of the XPLORE 12 display unit?

The XPLORE 12 integrated unit is equipped with a 12-inch touchscreen. The display is designed for intuitive use and reliable system integration aboard.