{"title":"Cabin lights","description":"\u003ch2\u003eCabin lights: precise interior lighting for boats\u003c\/h2\u003e\n\u003cp\u003eCabin lights provide daily lighting aboard: saloon, cabins, walkways, lockers, galley, chart table, or technical areas. They must deliver sufficient light for living, reading, stowing, and moving around without causing unnecessary glare or draining the battery bank too much. Selection therefore depends on visual comfort, installation type, and available voltage.\u003c\/p\u003e\n\u003cp\u003eThis collection includes ceiling lights, spots, bulkhead lights, linear lights, and LED panels for boat interiors. You’ll find recessed and surface-mounted models, warm white, neutral white, or red lighting, versions with built-in switches, as well as higher-output options for work areas or large volumes.\u003c\/p\u003e\n\u003ch3\u003eSurface-mounted bulkhead lights and linear lights\u003c\/h3\u003e\n\u003cp\u003eA surface-mounted bulkhead light is practical when you want to avoid cutting large holes or install a fixture on a bulkhead, under a cabinet, in a walkway, or in a technical area. The \u003ca href=\"\/en-us\/products\/mantagua-applique-saillie-kerguelen-800lm-led-etanche\" title=\"Applique en saillie Kerguelen Mantagua 800 lm LED étanche\"\u003eKerguelen surface-mounted bulkhead light\u003c\/a\u003e meets this need with an elongated format and lighting suited to areas requiring broader illumination than a simple spot.\u003c\/p\u003e\n\u003cp\u003eLinear lights cover a linear zone: worktop, locker, walkway, locker, or under-cabinet area. The \u003ca href=\"\/en-us\/products\/mantagua-reglette-lern-led-saillie-blanc-neutre-interrupteur-ip67\" title=\"Réglette Lern LED en saillie blanc neutre avec interrupteur IP67\"\u003eLern surface-mounted linear light in neutral white with switch\u003c\/a\u003e is suitable for direct mounting. For locker lighting, the \u003ca href=\"\/en-us\/products\/mantagua-batz-eclairage-led-penderie-200lm-3000k-blanc-chaud\" title=\"BATZ éclairage LED de penderie 200 lm 3000K blanc chaud\"\u003eBATZ LED locker light in warm white\u003c\/a\u003e delivers targeted light in a compact space.\u003c\/p\u003e\n\u003ch3\u003eCeiling lights, spots, and integrated lighting\u003c\/h3\u003e\n\u003cp\u003eRecessed ceiling lights are often used for general lighting in a cabin or saloon because they remain discreet once installed. The Tudy, Capri, Haïti, Rouzic, Nividic, Cantalupi, Prebit, and Hella families are included in the \u003ca href=\"\/en-us\/collections\/plafonnier-encastre\" title=\"Plafonniers encastrés bateau\"\u003erecessed ceiling lights\u003c\/a\u003e sub-collection. This type of fixture requires checking the cutout diameter, available depth, and access to connections before drilling.\u003c\/p\u003e\n\u003cp\u003eThe Tudy spots and surface-mounted spot holders are used when you want to aim or install a light point without redoing the entire ceiling. The \u003ca href=\"\/en-us\/products\/mantagua-spot-tudy-led-inox-blanc-20w-interrupteur-ip67\" title=\"Spot Tudy LED inox blanc 20W avec interrupteur IP67\"\u003eTudy 20W spot with switch\u003c\/a\u003e, the \u003ca href=\"\/en-us\/products\/mantagua-spot-tudy-led-inox-blanc-10w-ip67\" title=\"Spot Tudy LED inox blanc 10W IP67\"\u003eTudy 10W spot\u003c\/a\u003e, and the \u003ca href=\"\/en-us\/products\/mantagua-support-spot-saillie-blanc-80mm\" title=\"Support de spot en saillie blanc Mantagua\"\u003esurface-mounted white spot holder\u003c\/a\u003e suit these configurations.\u003c\/p\u003e\n\u003ch3\u003eHigh-output lighting, panels, and work areas\u003c\/h3\u003e\n\u003cp\u003eFor a saloon, galley, workshop, or large cabin, small spots may not suffice. LED panels provide wider, more even illumination. The \u003ca href=\"\/en-us\/products\/mantagua-chausey-1800-lumen-blanc-neutre-24vdc-eclairage-led-marine\" title=\"Chausey 1800 lumen blanc neutre 24 VDC éclairage LED marine\"\u003eChausey 1800 lm neutral white 24 VDC\u003c\/a\u003e and \u003ca href=\"\/en-us\/products\/mantagua-chausey-panneau-led-3500-lumen-24vdc\" title=\"Chausey panneau LED 3500 lumen blanc neutre 24 VDC\"\u003eChausey 3500 lm 24 VDC panel\u003c\/a\u003e target high-lumen needs.\u003c\/p\u003e\n\u003cp\u003eThe ENEZ and GUERNESEY linear lights are useful for areas requiring directed or linear light. The \u003ca href=\"\/en-us\/products\/mantagua-reglette-led-enez-30w-saillie-blanc-chaud-interrupteur\" title=\"Réglette ENEZ 30W saillie blanc chaud avec interrupteur\"\u003eENEZ 30W surface-mounted linear light in warm white with switch\u003c\/a\u003e, the \u003ca href=\"\/en-us\/products\/mantagua-reglette-led-enez-30w-saillie-blanc-chaud-rouge-marine\" title=\"Réglette ENEZ 30W saillie blanc chaud et rouge avec deux interrupteurs\"\u003eENEZ warm white and red\u003c\/a\u003e, and the \u003ca href=\"\/en-us\/products\/mantagua-reglette-led-guernesey-orientable-9-30vdc\" title=\"Réglette orientable GUERNESEY 20W blanc chaud 9-30VDC\"\u003eGUERNESEY 20W adjustable 9-30VDC linear light\u003c\/a\u003e let you adapt lighting to the actual use of the space.\u003c\/p\u003e\n\u003ch3\u003eLight color and night use\u003c\/h3\u003e\n\u003cp\u003eWarm white is usually the most comfortable for cabins and living areas. Neutral white provides clearer reading in technical or work zones. Red is useful when you need to minimize night glare, especially near a companionway, chart table, or traffic area used during night watches.\u003c\/p\u003e\n\u003cp\u003eIf lighting must serve both day-to-day living and night navigation, choose a dual-color solution or separate circuits. Very bright lighting may be pleasant in harbor but too harsh in the middle of the night. The right system should let you turn on only what’s necessary.\u003c\/p\u003e\n\u003ch3\u003eInstallation and ordering\u003c\/h3\u003e\n\u003cp\u003eBefore selecting, check available voltage, power draw, circuit protection, installation type, and control. A built-in switch works for an independent cabin; centralized control is better for a saloon or walkway with multiple lights. For surface-mounted fixtures, ensure clean cable runs; for recessed fixtures, verify depth and future access.\u003c\/p\u003e\n\u003ch3\u003eComplementary collections\u003c\/h3\u003e\n\u003cp\u003eTo complete your interior lighting setup, also see the \u003ca href=\"\/en-us\/collections\/liseuses\" title=\"Liseuses bateau\"\u003ereading lights\u003c\/a\u003e, \u003ca href=\"\/en-us\/collections\/lumieres-de-courtoisie\" title=\"Lumières de courtoisie bateau\"\u003ecourtesy lights\u003c\/a\u003e, \u003ca href=\"\/en-us\/collections\/eclairage-bimini\" title=\"Éclairage bimini bateau\"\u003ebimini lighting\u003c\/a\u003e, \u003ca href=\"\/en-us\/collections\/plafonnier-encastre\" title=\"Plafonniers encastrés bateau\"\u003erecessed ceiling lights\u003c\/a\u003e, and \u003ca href=\"\/en-us\/collections\/controle-eclairage\" title=\"Contrôles d'éclairage bateau\"\u003elighting controls\u003c\/a\u003e. Each family serves a different purpose: general lighting, reading, wayfinding, or control.\u003c\/p\u003e\n\u003ch3\u003eSkysat advice\u003c\/h3\u003e\n\u003cp\u003eStart by marking usage zones on your boat’s plan: living, reading, moving around, cooking, working. Then choose the fixture type and color. A good cabin doesn’t need a single, very bright light; it often benefits from combining soft general lighting, targeted spots, and clear zone-by-zone control.\u003c\/p\u003e","products":[{"product_id":"hella-plafonnier-36-led-lumiere-blanche-12-24v-7w-marin","title":"36-LED white light ceiling fixture 12\/24V 7W","description":"\u003cp\u003e\n    The HELLA 36-LED dome light (part number 2JA 959 037-521), although a discontinued item, remains a robust and energy-efficient lighting solution designed specifically for demanding marine and industrial environments. This luminaire, part of HELLA’s DuraLED® 36 series, is compatible with 12V and 24V systems thanks to its Multivolt™ technology, accepting a voltage range of 9 to 33V DC. Its power consumption is under 7W, with a current draw of less than 0.51A at 12V and less than 0.28A at 24V.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Design and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with 36 LEDs emitting a cool white light at 5000K, this dome light is designed for surface mounting. It comes pre-wired with 2.5 meters of sheathed multicore cable, optimized for sealed electrical connections in marine environments. The lens is made of high-impact acrylic (PMMA), a specific formulation that ensures enhanced durability against prolonged UV exposure and cleaning with common chemical products.\n\u003c\/p\u003e\n\n\u003ch3\u003eBuilt-in Protections and Applications\u003c\/h3\u003e\n\u003cp\u003e\n    The HELLA DuraLED® 36 dome light is fully sealed against dust and moisture, shock-resistant, vibration-proof, and protected against high-pressure washing and temporary immersion. It features advanced electrical protections against voltage spikes up to +500 volts and reverse polarity up to -700 volts (reverse polarity disables the function without damaging the product). Compliance with ISO 8846 ensures protection against ignition of flammable gases, making it suitable for hazardous areas. Additionally, its low-EMC design minimizes interference with radio communication systems, a benefit over standard lighting solutions. The lamp should be protected with an appropriate fuse in accordance with current marine electrical standards. Compared to less specialized lighting solutions, this DuraLED® 36 model is positioned as a choice for demanding applications where long-term reliability is a priority, particularly in engine rooms, lockers, or lazarettes, where products like the DuraLED® 20 may be used for less intensive lighting needs.\n\u003c\/p\u003e","brand":"Hella","offers":[{"title":"Default Title","offer_id":53723751088468,"sku":"EL722","price":113.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/capture_doc1_a05fe391-41af-47cd-9ccc-f1db9c1c353e.png?v=1779962572"},{"product_id":"prebit-spot-led-encastrable-3w-marin-exterieur-interieur","title":"3W recessed interior LED spot","description":"\u003cp\u003e\n    Designed for interior lighting on vessels, the PREBIT 3W EB32-1 recessed LED spot provides a discreet and energy-efficient lighting solution. Powered by 10-30V DC, it integrates easily into marine electrical systems thanks to its built-in ballast. Its 3-watt power delivers a luminous flux between 285 and 320 lumens, with a warm white color temperature of 3000 K. The color rendering index (CRI) above 85 ensures accurate color reproduction on board, with some models reaching a CRI \u003e90.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features and design\u003c\/h3\u003e\n\u003cp\u003e\n    The PREBIT EB32-1 spot features continuous dimming with memory, retaining the last brightness setting even after power-off and restart. It is also compatible with PREBIT’s Master-Slave system, enabling grouped control of multiple luminaires for sophisticated lighting management. Some models in the range offer colored light options (red or blue) for nightlight functionality. Manufactured with high-quality materials such as aluminum and acrylic glass, and often available with stainless steel finishes, it has an IP42 or IP44 protection rating, making it suitable for protected interior marine environments resistant to splashes.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning within the PREBIT range\u003c\/h3\u003e\n\u003cp\u003e\n    Positioned within the PREBIT recessed spot family, the EB32-1 model stands out with its 3W power, similar to versions EB01-1 or EB12-3 in terms of energy consumption. However, it may differ in available beam angles (25°, 44°, 85°, 90°) to suit various lighting configurations. For reference, models like the EB12-2.0 have an outer diameter of 70 mm and an installation depth of 18 mm with a mounting diameter of 62 mm. Newer generations, such as the EB12 2.0, incorporate an LED ring for more even light distribution. The PREBIT brand emphasizes German manufacturing as a guarantee of quality and durability for its marine luminaires.\n\u003c\/p\u003e","brand":"Prebit","offers":[{"title":"Default Title","offer_id":53723751874900,"sku":"EB32-1","price":153.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/capture_doc1_d4bd6186-9225-4c22-9a79-af2fa6da8f7f.png?v=1779962556"},{"product_id":"prebit-spot-led-interieur-marin-secondaire-eb12-1-3w-mat","title":"EB12-1 secondary LED interior matte 3W secondary light","description":"\u003cp\u003e\n    The PREBIT EB12-1 secondary spot is a 3W recessed LED luminaire designed specifically for interior lighting in marine environments such as yachts and cabins. This model is part of the EB12 series from German manufacturer PREBIT, known for the quality of its construction.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    This secondary spot operates at 9-32VDC, making it compatible with standard onboard electrical systems. It delivers a luminous output of 320 lumens with a warm white color temperature of 3000 Kelvin. Its color rendering index (CRI) is above 90, ensuring accurate color reproduction. The 90° beam angle is suitable for general lighting, particularly in spaces with low ceilings. Unlike older versions that used 3x1W LEDs, this model incorporates more recent LED technology for uniform light distribution.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and integration\u003c\/h3\u003e\n\u003cp\u003e\n    Made of aluminum and acrylic glass, the EB12-1 spot features a matte chrome finish. It has an IP44 rating, making it resistant to water splashes, which is appropriate for indoor marine use. Its recessed dimensions are approximately 60x16.5 mm with a diameter of 70 mm. A distinctive feature of the EB12-1 is its secondary light function, part of PREBIT’s \"Teamwork Main-Secondary\" system. This allows it to be controlled by a \"master\" luminaire for grouped lighting management. It can also be equipped with a colored nightlight function (typically red) for night vision, a common option in other models of the EB12 range such as the EB12-2 or EB12-3, offering greater versatility compared to basic indoor LED spots.\n\u003c\/p\u003e","brand":"Prebit Lighting","offers":[{"title":"Default Title","offer_id":53723752169812,"sku":"22923107","price":60.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/capture_doc1_ddeb742e-2ab3-44d7-940b-d2cfd0f20ec3.png?v=1779962185"},{"product_id":"cantalupi-spot-encastre-carre-cll-10w-prolight-marine","title":"Square recessed spot CLL 10W Prolight AB500mA 2700K 20\/32 V","description":"\u003cp\u003e\n    Designed for interior lighting of yachts and pleasure boats, the \u003cstrong\u003eCANTALUPI\u003c\/strong\u003e square recessed spot CLL 10W Prolight delivers a warm white LED light at 2700K. This luminaire from the CLL series integrates discreetly thanks to its ultra-thin design and square shape, optimizing the aesthetics of cabin ceilings or living spaces.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and Marine Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a power of 10W, this LED spot operates within a voltage range of 20 to 32V DC, typical of marine electrical systems. It is specifically designed to be powered by a constant current driver AB500mA, ensuring stable light output and extended LED lifespan. The CLL series from Cantalupi is recognized for its compatibility with dimming systems, offering advanced features such as soft start\/stop and memory of lighting level via compatible Cantalupi dimmers.\n\u003c\/p\u003e\n\u003ch3\u003eRobust Design and Optimal Diffusion\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCANTALUPI\u003c\/strong\u003e CLL 10W Prolight spot features an aluminum body, often complemented by an AISI 316L stainless steel frame for increased corrosion resistance in marine environments. Its recessed design with spring-mounted fixtures facilitates installation and minimizes recess depth. Light diffusion is ensured by a frosted glass, providing a wide symmetrical beam for uniform lighting and improved visual comfort, ideal for accent or general lighting in luxurious interiors.\n\u003c\/p\u003e","brand":"Cantalupi","offers":[{"title":"Default Title","offer_id":53723786346836,"sku":"20MONO","price":181.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_98eabc43-f755-4c39-86ef-b73ba101e4c3.jpg?v=1779962170"},{"product_id":"mantagua-eclairage-plafonnier-nividic-carre-inox-brosse-10w-ip67","title":"Brushed stainless steel NIVIDIC square 10W ceiling light with switch","description":"\u003cp\u003e\n    The \u003cstrong\u003eNIVIDIC square 1.9W LED ceiling light by MANTAGUA\u003c\/strong\u003e, part number 01526, is a recessed marine lighting solution designed for demanding environments. With a luminous flux of 140 lumens for a power consumption of only 1.9W, it delivers the equivalent of a 10W halogen bulb, optimizing onboard energy efficiency. Its construction in brushed stainless steel and ABS ensures robustness suitable for marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Optical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    This NIVIDIC lighting fixture integrates a CREE® 3000K LED, producing a pleasant warm white with a 120° beam angle. Powered by 9-30VDC, it ensures universal compatibility with ship electrical systems. Unlike models without a switch such as the NIVIDIC 01525, the 01526 version is equipped with an integrated push-button switch for easy local control. For higher power needs, the NIVIDIC range also offers 2.4W versions delivering 250 lumens, such as the 01528, providing a choice suited to different lighting requirements.\n\u003c\/p\u003e\n\n\u003ch3\u003eDurability and Marine Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With an IP67 waterproof rating, the NIVIDIC ceiling light 01526 is designed to withstand temporary immersion, making it ideal for installations in cabins, including wet rooms and showers, or even in protected outdoor areas. Its compliance with IEC60945 ensures no electromagnetic interference with sensitive equipment such as AIS or VHF, a critical criterion for navigation. Measuring 72 x 72 x 20 mm and weighing 54g, it is recessed-mounted using two supplied springs. It comes with 10 cm of electrical wire.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723842117972,"sku":"01526","price":42.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_34050079-7d33-4dfc-ad40-697c843b5762.png?v=1778274143"},{"product_id":"mantagua-eclairage-plafonnier-inox-brosse-nividic-carre-10w-led-ip67","title":"NIVIDIC brushed stainless steel square ceiling light 10W LED without switch","description":"\u003cp\u003e\n    The NIVIDIC square ceiling light from MANTAGUA, part number 01525, is an LED lighting solution designed for demanding marine environments. This recessed luminaire in brushed stainless steel, without a switch, integrates CREE® technology for optimal luminous efficiency. It delivers 140 lumens with a power consumption of only 1.9 W, equivalent to a 10 W halogen bulb, operating within a voltage range of 9 to 30 VDC.\n\u003c\/p\u003e\n\u003ch3\u003eRobust Design and Marine Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The NIVIDIC ceiling light 01525 stands out for its robustness and compliance with marine standards. Its brushed stainless steel and ABS housing provides increased durability against corrosion and impact (IK06 rating). With an IP67 waterproof rating, it is fully protected against temporary immersion and dust, making it suitable for wet areas such as showers or cockpits. Unlike similar models like the NIVIDIC with a switch (part number 01526) or polished versions (01432, 01433), this switchless version offers discreet integration into a centralized lighting system. Its electromagnetic compatibility (IEC60945) ensures it will not interfere with essential communication equipment such as VHF and AIS systems, a critical technical advantage over uncertified luminaires.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the NIVIDIC ceiling light is simplified by a recessed mounting system using two included springs. It comes with 10 cm of electrical wire for quick connection. Its warm white lighting color (3000 K) and 120° beam angle ensure uniform and pleasant light diffusion in the cabin. This model is also dimmable with the Mantagua dimmer (part number 01159), offering flexibility to adjust the onboard lighting ambiance. For specific installations, an insulating gasket can be provided to allow mounting on an aluminum base, preventing galvanic corrosion. Weighing only 54g and backed by a 2-year warranty, the NIVIDIC 01525 is a reliable and high-performance choice for marine interior lighting.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723842347348,"sku":"01525","price":38.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5a9d2c65-5689-41f4-8054-08c60ddebac1.png?v=1778274124"},{"product_id":"mantagua-reglette-30cm-usb-eclairage-bimini-1-2w-ip68","title":"33cm strip with USB connector for autonomous bimini lighting - 10W - IP68 waterproof - warm white - no battery","description":"\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA 01580 strip\u003c\/strong\u003e is an autonomous lighting solution designed for marine environments, ideal for illuminating biminis, cockpits, or other areas requiring compact and efficient supplementary lighting. Measuring 30 cm in length, this rigid strip delivers 100 lumens of light output for a power consumption of just 1.2 W, providing warm white lighting at 3100 K with a 50° beam angle.\n\u003c\/p\u003e\n\u003ch3\u003eRobust Design and Versatile Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Made from aluminum and resin, the \u003cstrong\u003eMANTAGUA 01580 strip\u003c\/strong\u003e ensures durability and resistance to demanding marine conditions, certified with an IP65 waterproof rating. Weighing 80 g, it is lightweight and easy to install using the two supplied mounting clips. Its main feature is the USB connector, which, when paired with a 1-meter USB extension cable, offers unmatched power supply flexibility. It can be plugged into any available USB source, such as a power bank, wall charger, or USB socket on board, eliminating the need for an integrated battery.\n\u003c\/p\u003e\n\u003ch3\u003ePosition in the MANTAGUA Range\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003e01580 strip\u003c\/strong\u003e stands out within the MANTAGUA autonomous lighting range due to its compact format and \"no power bank\" approach. Unlike the rigid strip 01547, which is longer (0.6 m) and more powerful (200 lm, 2.4 W) and typically supplied with a power bank, the 01580 model targets users seeking a discreet and lightweight solution, favoring their own USB power sources. Compared to 1-meter LED strips (such as 01500 or 01579), which offer a wider beam (120°) and higher power consumption (4 W), the 01580 strip provides a more focused beam (50°), ideal for precise directional lighting. Its aluminum and resin construction also gives it greater robustness than flexible strips. This strip comes with a 2-year warranty.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723851850068,"sku":"01580","price":37.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_854f476a-0c65-4b36-9559-fc5d4e717bb7.png?v=1778274470"},{"product_id":"mantagua-reglette-led-enez-30w-encastree-blanc-chaud","title":"ENEZ 30W LED strip light - Recessed - Warm white with 1 switch","description":"\u003cp\u003e\n    The MANTAGUA ENEZ 30W LED strip light is a recessed marine lighting solution designed to provide high-performance, long-lasting warm white light. With a power consumption of only 4.8W, it delivers a luminous flux of 180 lumens, equivalent to a 30W halogen bulb, optimizing energy efficiency onboard. This strip light features regulated 9-30VDC (or 9-32VDC) power supply, ensuring consistent light intensity and extending LED lifespan regardless of voltage fluctuations in the boat’s electrical circuit.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust and Versatile Design for Marine Environments\u003c\/h3\u003e\n\u003cp\u003e\n    Made from brushed aluminum and PMMA (polymethyl methacrylate), the ENEZ strip light is built to withstand demanding marine conditions. Its 120° beam angle provides wide, uniform light diffusion, ideal for lighting cabins, chart tables, helm stations, bathrooms, or technical compartments. Weighing only 85g and measuring approximately 25 x 17 x 252 mm for recessed installation, it integrates discreetly. The MANTAGUA ENEZ range also includes versions with red and white lighting, offering additional features such as intensity memory, though this model is specifically warm white.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Installation and Optimal Lifespan\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the ENEZ strip light is simplified by its \"polarity indifferent\" design, eliminating wiring constraints. The integrated rocker switch allows easy control of the lighting. High-quality CREE© LEDs ensure an estimated lifespan of 50,000 hours, significantly reducing maintenance needs. This strip light comes with a 2-year warranty and includes 10 cm of electrical wire, two brackets, and two screws for quick and reliable installation. Its French manufacturing underscores a commitment to quality and durability.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723852243284,"sku":"01278","price":52.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_32decc23-215b-4f4b-9018-9cdf8988a4f6.png?v=1778273321"},{"product_id":"mantagua-reglette-led-enez-30w-saillie-blanc-chaud-interrupteur","title":"ENEZ 30W LED strip - Surface mount - Warm white with 1 switch","description":"\u003cp\u003e\n    The \u003cstrong\u003eENEZ 30W LED strip from MANTAGUA\u003c\/strong\u003e is a marine interior lighting solution designed for versatility and efficiency. It delivers a luminous output of 180 lumens, equivalent to a 30W halogen bulb, while consuming only 4.8W. This strip operates within a regulated voltage range of 9 to 30V DC, ensuring stable light intensity and enhanced LED protection. Its 120° beam angle provides wide and uniform diffusion of warm white light (approximately 3100K).\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Integrated Features\u003c\/h3\u003e\n\u003cp\u003e\n    Manufactured from anodized aluminum and PMMA (polymethyl methacrylate), the \u003cstrong\u003eENEZ strip\u003c\/strong\u003e offers robustness suited to the marine environment. Its compact dimensions (254 mm x 22 mm x 23 mm) and 85g weight facilitate surface or flush mounting. Equipped with an integrated rocker switch, it provides direct lighting control. The use of high-quality CREE© LEDs contributes to its nominal lifespan of 50,000 hours and operational reliability.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Installation and Diverse Applications\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the \u003cstrong\u003eENEZ 30W strip\u003c\/strong\u003e is simplified by its non-polarized connection and included accessories: an electrical wire (10 or 50 cm depending on version) and two mounting brackets with screws. This strip is ideal for various interior applications aboard, such as cabin lighting, bathrooms, technical spaces, chart tables, or under-counter lighting. Compared to more basic solutions, the ENEZ strip stands out as a high-performance and durable option, offering superior energy efficiency over many first-generation halogen or LED alternatives.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723852439892,"sku":"01277","price":47.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_40341ae3-5994-4fa7-ae73-d2e57a421bf2.png?v=1778273300"},{"product_id":"mantagua-reglette-gavrinis-led-bome-bimini-etanche-ip68","title":"MANTAGUA Gavrinis LED strip for boom and bimini 15W - IP68 waterproof - Warm white - 120°","description":"\u003cp\u003e\n    The MANTAGUA Gavrinis strip 01271 is a compact LED lighting solution designed specifically for demanding marine environments. With a length of 370 mm, it delivers a luminous flux of 140 lumens (equivalent to 15W) in warm white (3100K) with a beam angle of 50°. Its aluminum and resin construction, combined with an IP68 waterproof rating, ensures optimal resistance to marine conditions, including prolonged immersion.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatile installation and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Gavrinis 01271 strip stands out for its flexible mounting options. It can be installed in the luff groove of a boom or attached to a 25 mm diameter bimini tube using the two supplied mounting clips. Its universal 9-30VDC power supply and 5-meter cable facilitate integration into onboard electrical systems, while reverse polarity protection ensures enhanced safety during installation. This 370 mm version offers a discreet solution for confined spaces, unlike the 600 mm version 01269, which provides 280 lumens for larger areas.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and scalability\u003c\/h3\u003e\n\u003cp\u003e\n    With an electrical consumption of only 4.2W, the Gavrinis 01271 strip optimizes battery autonomy onboard. It is compatible with MANTAGUA dimmers (reference 01159) for precise control of light intensity, allowing the ambiance to be adapted to each situation, from night sailing to deck lighting at anchor. This adaptability makes it a relevant choice for sailors seeking reliable and modular lighting, complementing the red versions (01425 and 01424) dedicated to night vision.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723852865876,"sku":"01271","price":66.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_a8bf45be-a8c9-456d-bc53-028488aec826.png?v=1778273281"},{"product_id":"mantagua-reglette-gavrinis-eclairage-bome-bimini-4-2w-rouge-etanche-ip68","title":"Gavrinis LED strip light for boom and bimini 15W equivalent - waterproof IP68 - Red - 120°","description":"\u003cp\u003e\n    The Gavrinis MANTAGUA LED strip light is a robust marine-grade lighting solution specifically designed for harsh marine environments. With a power consumption of 4.2W and a luminous flux of 140 lumens (15W equivalent), it delivers optimal red lighting for the boom or bimini, preserving night vision on board. Its aluminum and resin construction provides excellent resistance to marine conditions, complemented by an IP68 waterproof rating, ensuring complete protection against dust and prolonged immersion.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and technical integration\u003c\/h3\u003e\n\u003cp\u003e\n    Operating on a versatile 9 to 30 VDC power supply, the Gavrinis strip light easily integrates into the electrical systems of most vessels. Its 50° beam angle ensures efficient directional lighting. Compared to standard white lighting solutions such as the Gavrinis strip light 01271 (warm white, 140 lm), this red version is specifically designed for situations where preserving night visual acuity is critical, such as navigation or watchkeeping. The strip light is also protected against reverse polarity and can be dimmed using a Mantagua dimmer (reference 01159), offering flexible usage.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and durability\u003c\/h3\u003e\n\u003cp\u003e\n    Measuring 370 mm in length, this strip light comes with 5 meters of cable for easy wiring and two mounting clips suitable for 25 mm diameter bimini tubes, enabling versatile installation. Manufactured in France by MANTAGUA, renowned for the quality of its marine equipment, it ensures enhanced reliability and longevity. The 2-year warranty attests to the manufacturer's confidence in the robustness of this product, positioning Gavrinis as a durable and high-performance option for specialized marine lighting.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723853029716,"sku":"01425","price":68.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5b471561-78d7-4939-a761-a02b86fde2f1.png?v=1778273807"},{"product_id":"mantagua-reglette-gavrinis-eclairage-bome-bimini-30w-ip68-blanc-chaud","title":"Gavrinis LED strip lighting for boom and bimini 30W - waterproof IP68 - Warm white - 120°","description":"\u003cp\u003e\n    The MANTAGUA Gavrinis LED strip, part number 01269, is a robust and versatile marine lighting solution specifically designed for booms and biminis. Meeting marine durability standards, it delivers a luminous output of 280 lumens with an electrical consumption of 8.4 W, providing essential warm white lighting (3100 K) for night navigation and onboard ambiance. Its IP68 waterproof rating ensures total resistance to prolonged immersion, distinguishing it from IP67 or lower-rated solutions commonly found on the market. Compared to the more compact 370 mm version (140 lm \/ 4.2 W) in the same Gavrinis range, this 600 mm version represents the high-performance option for extended lighting.\n\u003c\/p\u003e\n\n\u003ch3\u003eLuminous performance and marine robustness\u003c\/h3\u003e\n\u003cp\u003e\n    With a 50° diffusion angle, the Gavrinis strip ensures targeted and efficient light coverage. Its universal 9-30 VDC power supply makes it compatible with most onboard electrical systems, from small sailboats to larger vessels. The aluminum and resin construction provides optimal durability against corrosive marine environments, vibrations, and impacts. Additionally, it features reverse polarity protection, a critical technical advantage for the reliability of onboard electrical installations. The lightweight design at 190 g facilitates integration without structural overload.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and advanced features\u003c\/h3\u003e\n\u003cp\u003e\n    The MANTAGUA Gavrinis strip comes with 5 meters of cable, allowing flexible connection to the boat’s electrical system. Its versatility is enhanced by two mounting clips specifically designed for Ø25 mm bimini tubes, in addition to its possible installation in the boom’s luff groove. This adaptability positions the Gavrinis as a modular lighting solution. It is also dimmable when paired with the Mantagua dimmer (part number 01159), offering precise control over light intensity to adapt to all situations, from demanding maneuvers to ambient lighting. CE-certified, it guarantees compliance with current European standards, ensuring safety and quality.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723853226324,"sku":"01269","price":76.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_54396902-119a-4800-a256-c5eb1c966fe1.png?v=1778273260"},{"product_id":"mantagua-reglette-gavrinis-eclairage-bome-bimini-rouge-ip68","title":"MANTAGUA Gavrinis LED strip for boom and bimini 30W - IP68 waterproof - Red - 120°","description":"\u003cp\u003e\n    The MANTAGUA Gavrinis 600 mm LED strip is a robust marine lighting solution designed specifically for booms and biminis. Delivering 280 lumens with a real power consumption of 8.4 W (equivalent to 30 W incandescent), this strip emits red light at a 50° angle, optimized for preserving night vision aboard. Its aluminum and resin construction, combined with IP68 waterproofing, ensures reliable operation in the most demanding marine environments.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The Gavrinis 600 mm features versatile 9–30 VDC power input, making it compatible with most boat electrical systems. At 600 mm long and weighing 190 g, it comes with 5 meters of cable for flexible installation. It is specifically designed to fit into the luff groove of a boom or to mount on a 25 mm diameter bimini tube using the two included clips. Unlike other white deck lighting solutions, this red version of the Gavrinis range is ideal for night sailing, where maintaining visual adaptation to darkness is critical. Regulated LEDs ensure consistent light output without flicker, and reverse polarity protection simplifies electrical connection. It can be dimmed using the Mantagua dimmer ref. 01159.\n\u003c\/p\u003e\n\u003ch3\u003ePosition in the MANTAGUA Range\u003c\/h3\u003e\n\u003cp\u003e\n    The Gavrinis 600 mm red strip is part of MANTAGUA’s Gavrinis series, which also includes shorter versions (370 mm) and warm white lighting. This 600 mm model is the most powerful red lighting option in the range, providing 280 lumens compared to 140 lumens for the 370 mm version. It is a technical choice for sailors seeking functional and discreet lighting without compromising night vision adaptation. Its robustness and IP68 rating make it superior to consumer-grade lighting solutions less suited to marine constraints, and it compares in durability to brands like Hella Marine or Lumishore for similar deck lighting applications.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723853390164,"sku":"01424","price":78.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_3e286be7-5e1f-4721-8db9-7326fcd67be3.png?v=1778273784"},{"product_id":"mantagua-reglette-led-guernesey-orientable-10w-blanc-chaud-9-30vdc","title":"Orientable LED strip GUERNESEY - 10W - warm white - 120° - 9-30VDC","description":"\u003cp\u003e\n    The \u003cstrong\u003eorientable LED strip GUERNESEY\u003c\/strong\u003e from MANTAGUA is an interior lighting solution designed for marine environments. With an actual power consumption of only 2W, it provides lighting equivalent to a 10W incandescent bulb, delivering a luminous flux of 80 lumens (or 74 lumens according to some specifications). Its input voltage range of 9 to 30VDC (up to 32VDC) ensures broad compatibility with 12V and 24V onboard electrical systems.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and versatility for marine lighting\u003c\/h3\u003e\n\u003cp\u003e\n    This strip light features a wide 120° beam angle, ensuring uniform and extended illumination. The lighting color is warm white (3100K), replicating a halogen-like ambiance with a color temperature below 3200K. Made from ABS and PMMA, it has a robust construction suited for marine conditions. Its compact dimensions of 35 x 35 x 225 mm and weight of 120g (some sources mention 85g) facilitate integration in confined spaces.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced technical design and durability\u003c\/h3\u003e\n\u003cp\u003e\n    The GUERNESEY incorporates a regulated LED system that maintains constant light intensity, extending LED lifespan up to 50,000 hours. Its orientable design allows rotation up to 270°, offering flexibility to direct light precisely where needed, whether in cabins, bathrooms, or technical compartments. It also features an integrated switch for practical use, polarity-insensitive electrical connection simplifying installation, and an opaque glass to diffuse LED light for a softer glow. Unlike basic luminaires, the MANTAGUA GUERNESEY strip light is optimized for reliability and energy efficiency in nautical environments, positioning itself as a durable and high-performance alternative to traditional or less specialized lighting solutions on the market.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723853521236,"sku":"01157","price":74.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_92315af1-bd8e-4711-9ceb-6f67f84bcc38.png?v=1778273038"},{"product_id":"mantagua-reglette-led-guernesey-orientable-9-30vdc","title":"Adjustable LED strip GUERNESEY - 20W - warm white - 120° - 9-30VDC","description":"\u003cp\u003e\n    The adjustable LED strip \u003cstrong\u003eMANTAGUA GUERNESEY\u003c\/strong\u003e is a cabin lighting solution designed for marine environments. Made from ABS and PMMA, it ensures robustness suited to nautical conditions. Its rotating design and integrated switch provide flexibility in use, allowing adjustment of the light beam orientation by 120° according to specific onboard needs.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Performance and Versatility\u003c\/h3\u003e\n\u003cp\u003e\n    This luminaire operates over an extended power range of 9 to 30 VDC, compatible with 12V and 24V electrical systems on boats. Its power consumption is optimized, with two selectable power modes of 2 W or 4 W, offering a balance between brightness and energy efficiency. The light output is diffused in warm white, creating a pleasant ambiance in interior spaces. Weighing only 120 g, the \u003cstrong\u003eGUERNESEY strip\u003c\/strong\u003e minimizes load on mounting structures.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Positioning\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the MANTAGUA GUERNESEY strip is simplified thanks to easy mounting with two provided screws. The product comes with 10 cm of stripped electrical wire, facilitating connection to the onboard network. This model is positioned as a reliable choice for interior lighting on sailboats and motorboats, as a complement or replacement for older solutions. Compared to fixed lighting, its ability to be oriented offers a significant advantage for areas requiring precise directional lighting, such as a chart table or berth. Manufactured in France (customs code HS 94054910), it meets European quality standards for marine equipment.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723853848916,"sku":"01158","price":92.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e41b9109-e09e-41e3-8523-85600f510fc2.png?v=1778273058"},{"product_id":"mantagua-spot-led-tudy-inox-poli-10w-ip67-marine","title":"Spot LED Tudy polished stainless steel 10W","description":"\u003cp\u003e\n    The MANTAGUA Tudy polished stainless steel 10W LED spot is a compact and robust marine lighting solution designed for demanding environments. With an electrical consumption of only 1.9 W, it delivers a luminous flux of 140 lumens, equivalent to a 10 W halogen light. This energy efficiency is achieved using high-quality CREE LED technology, providing a warm white light at 3000 K with a wide 120° diffusion angle.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Design and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Manufactured with a polished 316L stainless steel bezel and an ABS body, the Tudy 01437 ensures superior resistance to corrosion and impacts, as evidenced by its IK06 rating. Its IP67 waterproofing makes it ideal for installation in damp areas, whether in bathrooms, showers, or outdoor boat spaces. Powered by 9-30 VDC, it offers flexibility for integration into various marine electrical systems. Additionally, its IEC60945 certification ensures no electromagnetic interference with sensitive navigation systems such as VHF and AIS, a major advantage over non-certified lighting fixtures.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatility and Positioning within the MANTAGUA Range\u003c\/h3\u003e\n\u003cp\u003e\n    The Tudy polished stainless steel 10W spot is positioned as a versatile lighting solution within the MANTAGUA range. It is dimmable with the MANTAGUA dimmer (reference 01159), allowing precise control of light intensity to create different onboard atmospheres. While some competing spots or less specialized ranges may compromise aesthetics or durability, the Tudy combines refined design (polished stainless steel) with rigorous marine engineering. It complements the Tudy series, which also includes brushed stainless steel or white versions, as well as more powerful models (2.4 W \/ 250 lm such as the 01439), offering a choice tailored to each specific need while maintaining MANTAGUA’s high standards for robustness and electromagnetic compatibility. The recessed mounting is simplified by the two included springs, and it comes with 10 cm of electrical wire for easy connection.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723858043220,"sku":"01437","price":30.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_adef8174-484c-4d18-8205-39606962ca9e.jpg?v=1778273846"},{"product_id":"mantagua-spot-led-tudy-inox-poli-20w-etanche-marin","title":"Spot LED Tudy polished stainless steel 20W","description":"\u003cp\u003e\n    The Mantagua Spot LED Tudy Polished Stainless Steel 20W is a recessed luminaire designed for demanding marine environments. It delivers a warm white light of 250 lumens with a power consumption of only 2.4 W, equivalent to a 20 W halogen lamp. Its polished stainless steel and ABS construction, combined with an IP67 waterproof rating and IK06 impact resistance, ensures high durability in humid or outdoor conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Marine Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Operating on a versatile 9 to 30 VDC power supply, this LED spot integrates SAMSUNG® chips for enhanced reliability. Its 120° beam angle provides wide and uniform light diffusion (3000 K), suitable for cabins, bathrooms, or decks. IEC60945 certification confirms no interference with onboard VHF and AIS systems, a critical safety criterion for nautical applications. Compared to the 1.9 W (140 lm) Tudy version, this 2.4 W model offers higher light output, positioning it as a primary lighting solution for spaces requiring greater clarity.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    With compact dimensions (Ø 72 mm x 20 mm) and a weight of 54 g, the Tudy Polished Stainless Steel 20W spot is easily installed via recessing using the two supplied mounting springs. It is pre-wired with 10 cm of electrical cable to simplify connection. The Mantagua Tudy range also offers variants with switches, brushed or white finishes, and lower power ratings, but this model stands out for its balance between light output and aesthetic discretion. It is potentially compatible with the Mantagua dimmer (ref. 01159) for light intensity control, although compatibility is explicitly mentioned for the 1.9 W versions of the Tudy range. Its design even allows installation on an aluminum base via an optional insulating gasket, demonstrating its versatility.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723858207060,"sku":"01439","price":35.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_caef7f55-0a5f-4603-8e36-8617908b8468.jpg?v=1778273866"},{"product_id":"mantagua-applique-saillie-kerguelen-800lm-led-etanche","title":"Kerguelen surface-mounted wall light","description":"\u003cp\u003e\n    The MANTAGUA Kerguelen surface-mount light fixture is an LED lighting solution designed specifically for demanding marine environments. This range of fixtures stands out for its robustness, compactness, and lighting performance suited for use on boats.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    Made of aluminum and PMMA, the Kerguelen fixture has an IP67 waterproof rating, ensuring total resistance to temporary immersion and dust—a crucial advantage for outdoor or indoor installations exposed to moisture. It operates on a versatile 10 to 30VDC power supply range, simplifying its integration into most onboard electrical systems (12V or 24V). The model 01603, weighing 450g, corresponds to the 800-lumen version. This version delivers a luminous flux of 800 lumens with an electrical consumption of 13.5W, equivalent to a 130W incandescent bulb, providing significant lighting while minimizing power usage. The color temperature is a neutral white at 4500K, with a 120° beam angle, ensuring wide and comfortable light diffusion.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the MANTAGUA Range\u003c\/h3\u003e\n\u003cp\u003e\n    MANTAGUA’s Kerguelen series is renowned for its slim profile and high luminous output despite its compact size. In addition to the 800-lumen model (dimensions: 54 x 12 x 600 mm), the range also includes a smaller 550-lumen version (9W, 300 mm, 225g). This diversity allows users to select the power and size best suited to their specific needs, whether illuminating a helm station, a saloon, or narrow deck areas. MANTAGUA products, such as the Kerguelen fixture, are generally recognized for their longevity, with an estimated lifespan of around 50,000 hours—surpassing many generic LED lighting solutions available on the market and offering reliability comparable to brands like Lopolight or Hella Marine for specific applications.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723866890580,"sku":"01603","price":84.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_7b4eb689-3910-4dd2-9e19-dec2334c2d2b.png?v=1778274660"},{"product_id":"mantagua-reglette-led-enez-30w-saillie-blanc-chaud-rouge-marine","title":"ENEZ 30W LED strip light - Surface mounted - Warm white and red - with 2 switches","description":"\u003cp\u003e\n    The ENEZ 30W LED strip from \u003cstrong\u003eMANTAGUA\u003c\/strong\u003e is a versatile lighting solution designed for marine applications. This surface-mounted strip integrates warm white and red lighting functions, controlled by two independent rocker switches. It delivers a luminous flux of 140 lumens in warm white, equivalent to a 30W halogen bulb, and 28 lumens in red, all for an optimized power consumption of only 4.8W.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and robustness for the marine environment\u003c\/h3\u003e\n\u003cp\u003e\n    Operating on a regulated voltage range of 9 to 30 VDC, the \u003cstrong\u003eMANTAGUA ENEZ 30W\u003c\/strong\u003e strip ensures extended compatibility with marine electrical systems, with no polarity for simplified installation. Its 3100K color temperature in warm white accurately replicates halogen light, while its 120° beam angle guarantees wide and uniform light diffusion. The design uses brushed or anodized aluminum and PMMA, providing enhanced durability against the constraints of the marine environment.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and integration\u003c\/h3\u003e\n\u003cp\u003e\n    With compact dimensions of 254 x 22 x 23 mm and a weight of 85g, the \u003cstrong\u003eENEZ 30W\u003c\/strong\u003e strip integrates discreetly into various spaces aboard. It is supplied with two mounting brackets and two screws, as well as 10 to 50 cm of electrical wire, facilitating surface installation. Manufactured in France, this strip uses CREE© LEDs, recognized for their quality and robustness, guaranteeing a lifespan of 50,000 hours. It positions itself as a reliable and energy-efficient alternative to less performant lighting solutions, such as classic halogen models, offering superior versatility compared to monochrome strips.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723868692820,"sku":"01383","price":58.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_deead3ac-1abc-479f-82e6-b2c3dffebc2f.jpg?v=1778273642"},{"product_id":"mantagua-rehausse-carree-inox-316l-blanc-spot-saillie","title":"Square stainless steel 316L white riser for surface-mounted spotlight","description":"\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA white square stainless steel 316L bracket\u003c\/strong\u003e (reference 01491) is a mounting support designed for surface installation of MANTAGUA Tudy and Nividic spotlights. Made of A4 stainless steel (316L) and painted white, it provides a robust and aesthetic solution for demanding marine environments. Its dimensions of 98 x 98 x 17 mm are specifically adapted to compatible spotlights, ensuring perfect integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and materials for marine use\u003c\/h3\u003e\n\u003cp\u003e\n    This bracket stands out for its use of 316L stainless steel, a material known for its superior resistance to corrosion in saline environments, unlike the more common 304 stainless steel used in less exposed applications. The white painted finish contributes to the overall aesthetics and durability of the product. The design allows overcoming installation constraints when recessed mounting is impossible, particularly in the absence of ceiling joists or where structural thickness does not permit it. It complements MANTAGUA’s range of accessories, ensuring the longevity and functionality of onboard lighting systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and strategic installation\u003c\/h3\u003e\n\u003cp\u003e\n    Specifically developed for MANTAGUA Tudy and Nividic spotlights, this bracket ensures optimal compatibility and simplified installation. These spotlights, often rated IP67 for water resistance, benefit from a support that maintains their integrity in humid conditions. Integrating this bracket is essential for installations requiring surface mounting, offering a functional alternative to recessed solutions. It is supplied with the necessary mounting screws, making the process easier for installers.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723868922196,"sku":"01491","price":13.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_9f5121e7-9ed6-49d1-81f3-71d679e2f03a.jpg?v=1778274087"},{"product_id":"mantagua-spot-tudy-led-inox-blanc-10w-ip67","title":"Tudy spotlight with white stainless steel LED 10W IP67","description":"\u003cp\u003e\n    The \u003cstrong\u003eSpot Tudy white stainless steel LED 10W IP67 MANTAGUA\u003c\/strong\u003e is a cabin light designed for demanding marine environments. This flush-mount fixture combines a light output of 140 lumens, equivalent to a 10W halogen bulb, with optimized power consumption of 1.9W at a 9-30V DC supply. Its ABS body with a white stainless steel cover ensures robustness suitable for marine conditions, and its IP67 certification guarantees total waterproofing, allowing installation even in showers or protected outdoor areas.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with high-quality CREE® LEDs, the Spot Tudy provides warm white lighting (3000K) with a wide 120° beam angle, ideal for general or supplementary lighting. Its compact dimensions (Ø 72 mm x H 20 mm) and lightweight (54g) facilitate discreet integration. Installation is simplified by flush mounting via two springs or three screws, and it comes with 10 cm of electrical wire. This spot is also compatible with the Mantagua dimmer (reference 01159) for precise light intensity adjustment.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Integration and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSpot Tudy\u003c\/strong\u003e stands out for its compliance with IEC60945 regulations, ensuring no electromagnetic interference with onboard VHF and AIS systems. This feature is critical for the reliability of navigation and communication equipment. While other lights in the MANTAGUA range, such as the Tudy 20W (250 lumens), may offer higher power, the 10W model positions itself as a balanced solution, combining low power consumption, stainless steel durability, and IP67 waterproofing. It outperforms many entry-level plastic spots in terms of resistance and immunity to interference, making it a reliable and high-performance choice for interior lighting and some exterior applications on vessels.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723870134612,"sku":"01489","price":29.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_84ba17c0-09f8-4de0-b304-256bd1426949.jpg?v=1778274069"},{"product_id":"mantagua-spot-tudy-led-inox-blanc-20w-interrupteur-ip67","title":"Tudy 20W white stainless steel LED spotlight with push-button switch, IP67","description":"\u003cp\u003e\n    The MANTAGUA Tudy LED spot, part number 01549, is a robust and versatile marine lighting solution designed for demanding environments. This luminaire features an ABS housing with a 316L white stainless steel trim, ensuring enhanced durability in saline conditions. It delivers a luminous flux of 250 lumens with a warm white color temperature of 3100 Kelvins, equivalent to a 20W halogen bulb while consuming only 2.4W. Its wide 120° beam angle provides uniform coverage, ideal for cabins, wet areas, or decks.\n\u003c\/p\u003e\n\u003ch3\u003eMarine Design and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With an IP67 protection rating, the Tudy spot is fully waterproof, making it suitable for installation in showers or outdoor areas where less protected fixtures—such as some standard indoor lighting models—would fail. Operating on a 9 to 30VDC voltage range, it is compatible with most 12V and 24V marine electrical systems. Its lightweight design (54 grams) and compact dimensions (72mm outer diameter, 54mm cutout diameter, 20mm total height) allow for discreet integration.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Features and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Tudy spot integrates high-quality SAMSUNG® LEDs, known for their reliability and efficiency. A robust push-button switch is built-in for simplified control. IEC60945 certification confirms its lack of interference with VHF and AIS systems—a critical requirement for navigation safety and equipment performance. Unlike basic spots, the Tudy offers a complete lighting solution with its integrated switch, positioning it as a practical and high-performance choice for applications demanding high water resistance and ease of use. It stands out compared to models without a remote switch or less powerful ambient lights in the MANTAGUA range.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723870331220,"sku":"01549","price":37.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_de16b692-dbd5-4114-891b-25fed4e25399.jpg?v=1778274267"},{"product_id":"mantagua-spot-tudy-led-20w-inox-blanc-ip67","title":"Tudy 20W IP67 stainless steel LED spotlight","description":"\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA Spot Tudy 20W White LED Stainless Steel\u003c\/strong\u003e is a robust cabin lighting solution specifically designed for demanding marine environments. This LED luminaire consumes 2.4W while delivering light output equivalent to a 20W halogen lamp, ensuring efficient illumination aboard. Its compatibility with 9-30V DC power supplies makes it highly versatile for boat electrical systems.\n\u003c\/p\u003e\n\u003ch3\u003eMarine Design and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    With an IP67 waterproof rating, the Tudy spot is fully protected against temporary immersion, making it ideal for installation in showers, cockpits, or other moisture-exposed areas. Its construction combines ABS with a white stainless steel finish, ensuring excellent resistance to corrosion and marine conditions. Unlike non-marine-specific lighting solutions, the Tudy is engineered to avoid interference with VHF and AIS systems, complying with IEC60945 regulations—a major advantage for navigation safety and equipment reliability.\n\u003c\/p\u003e\n\u003ch3\u003eLighting Characteristics and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Tudy spot emits a warm white light (approximately 3000K or 3100K) with a luminous flux of 250 lumens, diffused over a wide 120° angle for uniform coverage. It features SAMSUNG® LED chips known for their durability and longevity. For flexible use, the spot is dimmable when paired with a compatible MANTAGUA dimmer. Its flush-mount installation is simplified with springs or three screws, and it can also be surface-mounted using a dedicated MANTAGUA mounting bracket. This technical positioning sets it apart from generic lighting, offering superior reliability and system integration aboard.","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723870495060,"sku":"01548","price":34.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_2ef74cd4-e2ce-4e8f-835f-187bd1cf4745.jpg?v=1778274250"},{"product_id":"mantagua-support-spot-saillie-blanc-80mm","title":"White surface-mounted spotlight bracket","description":"\u003cp\u003e\n    The \u003cstrong\u003ewhite MANTAGUA 01103 surface-mounted spot bracket\u003c\/strong\u003e is a mounting solution specifically designed for integrating lighting in marine environments. Intended for surface installation, it allows fixing spotlights, such as the Ouessant spot, in areas where the absence of ceiling lining or structural constraints prevent traditional recessed installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This bracket is characterized by its compact dimensions of Ø 80 mm with a height of 16 mm, offering a low-profile and discreet appearance once installed. Its white color blends harmoniously with most modern boat interiors. Installation is simplified, requiring only two mounting screws, which are supplied with the product, ensuring quick and secure implementation. Unlike complete lighting solutions such as MANTAGUA 30W LED deck floodlights, this product is a pure mounting accessory, focusing on installation flexibility rather than intrinsic lighting performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Positioning and Use\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003ewhite MANTAGUA surface-mounted spot bracket\u003c\/strong\u003e stands out from recessed systems or lighting rails by its ability to adapt to bare flat surfaces. It is ideal for renovations or installations where cutting materials is undesirable or impossible. It offers a functional alternative to brackets from competing brands like Garmin or Raymarine, which focus more on integrating multifunction displays, by providing a targeted solution for interior or cockpit lighting. Its French design ensures compliance with demanding nautical standards, although its electrical specifications depend entirely on the spotlight it is intended to accommodate.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":53723870691668,"sku":"01103","price":13.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5d2c713b-fd4b-4636-b57d-f3ea429bf127.jpg?v=1778272964"},{"product_id":"mantagua-rouzic-spot-led-inox-maitre-bicolore-ip67","title":"Rouzic stainless steel polished mirror - 20W - waterproof IP67 - master with switch","description":"\u003cp\u003e\n    The Mantagua Rouzic recessed LED spot (01472) is designed for cabin and helm lighting, providing a robust and versatile solution for marine environments. This model stands out with its \"master\" capability with integrated switch, allowing control of up to 20 Rouzic slave spots via a daisy-chaining system. It offers dual-color lighting, combining a 3000 K warm white and red, ideal for night navigation, all with a luminous flux of 135 lumens for a power consumption of only 2.8 W (equivalent to 10 W halogen).\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    Made of polished stainless steel and PMMA, the \u003cstrong\u003eRouzic master\u003c\/strong\u003e ensures high durability with IP67 waterproofing and IK06 impact resistance. It operates within a voltage range of 9 to 30 VDC, ensuring compatibility with boat electrical systems. Its 120° beam angle provides homogeneous light diffusion, essential for optimal visual comfort on board. This model includes a dimmer to adjust light intensity, a key feature for adapting to different conditions and ambiances.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning within the Rouzic Range and Beyond\u003c\/h3\u003e\n\u003cp\u003e\n    Within the Mantagua Rouzic range, this spot (reference 01472) is specifically the \"master with switch\" and dual-color (warm white\/red) version. It serves as the core of a sophisticated lighting system, unlike \"standard\" models (such as 01481 in white only) or \"slave\" models (such as 01475 in white\/red without switch) that depend on a master unit. Unlike basic LED spots that offer a single color and lack dimming or daisy-chaining functions, the Mantagua \u003cstrong\u003eRouzic master\u003c\/strong\u003e provides advanced system integration comparable to solutions offered by brands like Lumishore or Hella Marine for more complex applications, but in a compact and accessible format for interior or cockpit lighting.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750553764180,"sku":"01472","price":58.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_aa6fdfde-58c5-494a-a1d0-135fce3e2831.jpg?v=1778274014"},{"product_id":"mantagua-rouzic-maitre-spot-led-bicolore-ip67","title":"Rouzic stainless steel polished mirror - 20W - waterproof IP67 - master without switch","description":"\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA Rouzic master LED spot without switch\u003c\/strong\u003e, part number 01473, is designed for cabin and helm lighting in marine environments. This specific model is part of the Rouzic range from MANTAGUA, known for its Master\/Slave system enabling the management of a uniform lighting network. With a power consumption of 2.8W, it delivers a luminous flux of 135 lumens and offers a two-color lighting in warm white (3000K) and red, ideal for night navigation.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Integration and Control\u003c\/h3\u003e\n\u003cp\u003e\n    This Rouzic master spot is distinguished by the absence of an integrated switch, positioning it as a central element in a remotely controlled lighting system. Unlike the \"Rouzic master with switch\" versions (ref. 01472 for two-color) or \"standard Rouzic with switch\" (ref. 01476 for two-color), model 01473 is intended to be controlled via an external switch or another master spot equipped with a switch. It includes a dimmer to adjust light intensity and can drive up to 20 additional spots (master or slave), allowing flexible management of lighting throughout the boat. This architecture provides an alternative to more complex lighting systems requiring external control modules for dimming and zone management.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    Made of polished stainless steel and PMMA, the \u003cstrong\u003eMANTAGUA Rouzic master\u003c\/strong\u003e benefits from a design resistant to marine environments. Its IP67 waterproof rating ensures full protection against temporary immersion and dust, while its IK06 impact resistance rating guarantees durability against typical mechanical stresses on board. The power supply is compatible with 9 to 30 VDC voltages, offering flexibility for various electrical installations. The 120° diffusion angle ensures extended light coverage, comparable to a 10W halogen bulb, with the energy efficiency of LEDs. The recessed mounting is facilitated by two included springs, with drilling dimensions of Ø 54 mm for a depth of 15 mm. Each spot comes with 10 cm of electrical wire for connection.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750554222932,"sku":"01473","price":57.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_eb8df8c8-1d7a-4736-9819-3f1970696305.jpg?v=1778274037"},{"product_id":"mantagua-chausey-panneau-led-3500-lumen-24vdc","title":"Chausey - 3500 lumens - Neutral white - 595 x 595 mm - 24 VDC","description":"\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA Chausey\u003c\/strong\u003e LED panel is a high-performance, reliable lighting solution specifically designed for interior spaces on commercial and professional vessels. With a luminous flux of 3500 lumens and a power consumption of only 40W, it delivers an intensity equivalent to a 300W incandescent bulb, ensuring optimal lighting for walkways and dining areas. Its 595 x 595 mm square format and slim 9 mm thickness allow for discreet and aesthetic surface mounting.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Performance for Marine Environments\u003c\/h3\u003e\n\u003cp\u003e\n    Operating at 24 VDC, the \u003cstrong\u003eMANTAGUA Chausey\u003c\/strong\u003e panel is perfectly suited to standard marine electrical systems. It emits a neutral white light at 4000K with a wide 120° beam angle, ensuring even light distribution. Constructed from ABS and PMMA, it is robust enough to withstand marine constraints, and its 50,000-hour lifespan minimizes maintenance needs. While its IP40 rating is intended for internal areas, it provides adequate protection against solid objects larger than 1 mm.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Installation and Operational Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the \u003cstrong\u003eMANTAGUA Chausey\u003c\/strong\u003e panel is straightforward thanks to its surface-mount design and integrated LED driver, along with 4 flat-head screws and 4 masking covers for a clean finish. Its non-polarized connection simplifies wiring significantly, reducing the risk of errors during assembly. Compared to traditional lighting solutions or lower-end LED panels, the Chausey stands out for its high luminous efficiency, low power consumption, and design tailored for demanding environments, offering a durable alternative to non-marine-specific fixtures. This product is backed by a 2-year warranty, attesting to its quality and reliability.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750576013652,"sku":"01553","price":212.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_777e3db5-9e68-42dd-b057-324ecb8f7cbf.jpg?v=1778274287"},{"product_id":"mantagua-chausey-1800-lumen-blanc-neutre-24vdc-eclairage-led-marine","title":"Chausey - 1800 lumens - Neutral white - 295 x 295mm - 24 VDC","description":"\u003cp\u003e\n    The MANTAGUA Chausey LED panel is a 295 x 295 mm square downlight designed for interior lighting on commercial and professional boats. Operating at 24 VDC, it delivers a luminous flux of 1800 lumens with a power consumption of 20W, providing neutral white light (4000K) through a 120° beam angle.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and marine applications\u003c\/h3\u003e\n\u003cp\u003e\n    Made of ABS and PMMA, the Chausey has an IP40 waterproof rating, making it suitable for interior spaces such as walkways and dining areas. Its surface-mount design and low 9 mm profile facilitate discreet integration. This luminaire is positioned as a versatile lighting solution for areas requiring uniform and high-performance illumination. Compared to more compact solutions like the MANTAGUA Belle-Île, the Chausey offers a larger lighting surface and higher luminous flux, while distinguishing itself from spotlights by serving as ambient lighting rather than targeted functional lighting.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and installation\u003c\/h3\u003e\n\u003cp\u003e\n    With an estimated lifespan of 50,000 hours and an operating temperature range from -20°C to +55°C, the Chausey LED panel ensures long-term reliability in marine environments. Installation is simplified by its unpolarized design and lightweight 350g weight. Each unit is supplied with an LED driver and necessary mounting screws, including protective caps, ensuring a complete and immediate installation.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750576406868,"sku":"01554","price":159.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_10539902-3eb7-4c34-a182-9079e3e45d7b.jpg?v=1778274301"},{"product_id":"mantagua-reglette-lern-led-saillie-blanc-neutre-interrupteur-ip67","title":"Lern - surface-mounted LED strip - neutral white - with switch","description":"\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA Lern\u003c\/strong\u003e LED strip, part number 01572, is a surface-mounted lighting solution designed specifically for demanding marine and interior environments. This compact luminaire, measuring 166 x 60.5 x 14 mm, features a blue push-button switch for simplified operation. With its extra-flat design and IP67 rating, the Lern is a robust and versatile choice for confined spaces requiring reliable and durable lighting.\n\u003c\/p\u003e\n\n\u003ch3\u003eLighting Performance and Electrical Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA Lern\u003c\/strong\u003e delivers a luminous flux of 300 lumens with an electrical consumption of just 3.5W. This performance is equivalent to a 40W incandescent bulb, providing notable energy efficiency. It produces a neutral white light at 4000K with a wide 120° beam angle, ensuring even illumination. Its compatibility with a voltage range of 10 to 30 VDC makes it directly compatible with most vessel electrical systems without requiring a specific adapter, unlike many consumer-grade lighting solutions. The integrated DC-DC regulation ensures a lifespan of 50,000 hours, optimizing long-term reliability.\n\u003c\/p\u003e\n\n\u003ch3\u003eRugged Design and Simplified Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Manufactured from aluminum and PMMA, the \u003cstrong\u003eMANTAGUA Lern\u003c\/strong\u003e strip is designed to withstand the stresses of marine environments, including humidity, vibrations, and corrosion. Its IP67 rating attests to full protection against dust and resistance to temporary immersion, making it ideal for heads, bilges, or technical compartments. Installation is simplified by its surface-mounted design and the inclusion of 10 cm of electrical cable and two screws. The integrated switch eliminates the need for an external wall switch, simplifying wiring and aesthetic integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatile Applications and Positioning\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA Lern\u003c\/strong\u003e LED strip is particularly suited for lighting berths, under galley furniture, in heads, or technical spaces aboard vessels. Unlike standard non-marine LED strips that often lack robustness and waterproofing, the MANTAGUA Lern offers a dedicated solution with IP67 protection and durable construction. It stands out from competing solutions or other MANTAGUA ranges without an integrated switch due to its ease of use and installation, providing functional and reliable lighting where space and simplicity are critical. Its compact size and low weight of 110g make it discreet and easy to install in various configurations.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750584893780,"sku":"01572","price":49.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_4fae23cc-f23b-48b9-ac86-d68db0d40323.jpg?v=1778274412"},{"product_id":"mantagua-capri-spot-led-ultra-fin-inox-poli-ip67-avec-interrupteur","title":"Capri - ultra-thin - polished stainless steel - 10W - waterproof IP67 - with push-button switch","description":"\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA Capri recessed LED spot\u003c\/strong\u003e (reference 01876) is an ultra-thin lighting solution designed for marine interiors, particularly cabins. It stands out with its compact design, featuring a cover just 1 mm thick, and its polished stainless steel finish, providing a discreet and modern aesthetic. This model includes a push-button switch for simplified local control.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Performance and Marine Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Operating within a voltage range of 9 to 30 VDC, the Capri 01876 consumes 1.9 W for a luminous flux of 140 lumens, equivalent to a 10 W halogen bulb. It emits a warm white light at 3000 K with a 120° beam angle, ensuring efficient and pleasant illumination. Its robust design combines stainless steel and ABS, offering enhanced resistance to marine environments. With an IP67 waterproof rating and IK06 shock resistance, this spot is perfectly suited to humid conditions and vibrations on board. Its lightweight design (54g) makes installation easy.\n\u003c\/p\u003e\n\n\u003ch3\u003eCapri Range: Positioning and Options\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCapri 01876\u003c\/strong\u003e is part of a complete range of Mantagua LED spots. It represents the 1.9 W \/ 140 lm version with a switch and polished stainless steel finish. The Capri range also includes versions without a switch (ref. 01875 in polished stainless steel, 01877 in brushed stainless steel, 01879 in white), which are dimmable with the Mantagua dimmer 01159. For higher lighting needs, 2.4 W \/ 250 lm models are available (ref. 01881 with switch, in polished stainless steel, and other finishes). This variety allows you to choose the model best suited to each application, whether for performance or aesthetic finish. An insulating gasket is also available as an option for mounting on aluminum supports, preventing galvanic corrosion. Installation is made easy with two included springs and 10 cm of wiring provided.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750664716628,"sku":"01876","price":34.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e0a0fd37-7d87-464f-b4be-3e8d571c8a40.png?v=1778275442"},{"product_id":"mantagua-capri-spot-led-inox-brosse-10w-etanche-ip67-interrupteur","title":"Capri - ultra thin - brushed stainless steel - 10W - IP67 waterproof - with push-button switch","description":"\u003cp\u003e\n    The \u003cstrong\u003eMantagua Capri LED spot\u003c\/strong\u003e, part number 01878, is an interior lighting solution designed for demanding marine environments. This model stands out with its ultra-thin design featuring a 1 mm thick cover and its brushed stainless steel finish, providing a modern and discreet aesthetic. With a power consumption of only 1.9 W, it delivers a luminous flux of 140 lumens, equivalent to a 10 W halogen bulb, while offering a warm white 3000 K lighting color and a wide 120° beam angle.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Simplified Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Made from stainless steel and ABS, the \u003cstrong\u003eMantagua Capri\u003c\/strong\u003e ensures enhanced durability in marine conditions. Its IP67 waterproof rating guarantees full protection against temporary immersion and dust, while its IK06 classification indicates good impact resistance. The 9 to 30 VDC power range makes it compatible with most onboard electrical systems. The integration of a push-button switch directly on the spot simplifies installation and use, eliminating the need for an external switch. The recessed mounting is easily achieved using the two included springs, and the spot comes with 10 cm of electrical wire.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning within the Mantagua Capri Range\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMantagua Capri\u003c\/strong\u003e range offers various options to suit every need. Model 01878, with its brushed stainless steel finish and integrated switch, is positioned as a versatile and elegant option. Other variants are available, such as models without a switch (ref. 01877) or versions with higher power (2.4 W for 250 lumens, e.g., ref. 01884 in brushed stainless steel with a switch), as well as polished stainless steel, white, or black finishes (ref. 01875, 01879, 01993, etc.). This diversity allows you to choose the Capri spot best suited to the aesthetics and specific lighting requirements of each vessel, always offering the same reliability and ease of integration.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750665503060,"sku":"01878","price":35.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f840bbc8-34dc-4a76-9762-e860b68e91f9.jpg?v=1778275455"},{"product_id":"mantagua-tudy-inox-blanc-10w-led-etanche-ip67-interrupteur","title":"Tudy Inox white - 10W - IP67 waterproof - with push-button switch","description":"\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA Tudy Inox white 10W LED spot\u003c\/strong\u003e is a marine lighting solution designed for demanding environments. Part of the Capri series, this ultra-thin luminaire (1mm bezel) delivers 140 lumens with optimized power consumption of only 1.9 W, equivalent to a 10 W halogen light. Its white stainless steel and ABS construction ensures increased resistance to marine conditions, while its IP67 waterproof rating makes it suitable for installation in damp areas such as showers or sheltered cockpits, exceeding the requirements of many standard indoor spots.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and marine integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a versatile 9 to 30 VDC power supply, the \u003cstrong\u003eMANTAGUA Tudy Inox white 10W\u003c\/strong\u003e is compatible with most boat electrical systems. Its 120° beam angle provides wide, even warm white (3000 K) lighting, ideal for creating a comfortable cabin ambiance. A key advantage of this spot is its IEC60945 (EMC) certification, ensuring it does not interfere with essential communication systems such as AIS and VHF, a feature often absent in less specialized competitors like generic lighting models. The version with integrated push-button switch offers convenient direct operation. For higher brightness needs, MANTAGUA also offers 2.4 W Tudy models delivering 250 lumens.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust design and simplified installation\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA Tudy Inox white 10W\u003c\/strong\u003e stands out for its robustness with an IK06 impact rating and the use of high-quality CREE® LEDs. Its lightweight 54g weight and compact dimensions (Ø 72 mm, height 20 mm) facilitate discreet integration. Recessed mounting is quick and secure thanks to the two included springs. For specific installations, it can be supplied with an insulating plastic gasket, allowing mounting on an aluminum base without risk of galvanic corrosion. Unlike some models in the Tudy range (references 01875, 01877 and 01879), this push-button version (01880) is not dimmable with the Mantagua dimmer (ref. 01159).\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750666781012,"sku":"01880","price":34.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_9b682e7c-2547-4c6f-bc75-95fec0304144.jpg?v=1778275472"},{"product_id":"mantagua-penfret-700-lumen-rouge-panneau-led-encastre","title":"Penfret - 700 lumen - Red - Ø170mm - 225-260 VAC","description":"\u003cp\u003e\n    The \u003cstrong\u003eMANTAGUA Penfret\u003c\/strong\u003e recessed LED panel (reference 01898) is a lighting solution specifically designed for the interior spaces of commercial and professional vessels. With a luminous output of 700 lumens in red and an electrical consumption of only 12 W, it provides efficient and discreet lighting, particularly suited to areas requiring night vision preservation or a specific ambiance, such as walkways and saloons. Operating at 225-260 VAC, this model integrates easily into standard marine electrical systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    Made from aluminum and PMMA, the \u003cstrong\u003eMANTAGUA Penfret\u003c\/strong\u003e has a diameter of 170 mm and a thickness of 20 mm for recessed installation. Its 120° beam angle ensures uniform light distribution. The panel is designed to operate within a temperature range of -25°C to +55°C, ensuring reliability in various marine environments. It is supplied with its power supply (LED driver) and comes with a 2-year warranty.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning within the Mantagua range\u003c\/h3\u003e\n\u003cp\u003e\n    The Penfret red 700-lumen model stands out within the MANTAGUA Penfret series due to its specific lighting color and power output. While other variants such as the Penfret 1500-lumen model (refs. 01448 or 01551) offer higher brightness in neutral white (4000 K) for general lighting, this red version is optimized for applications where low-light visibility is critical. Its IP20 rating restricts it to dry indoor installations, unlike deck luminaires which require higher IP ratings. It complements the Mantagua range by providing a functional and specialized lighting option for the requirements of marine professionals.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750666912084,"sku":"01898","price":133.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_3ab8df5c-de97-4a83-8be2-98f4e5edccd2.jpg?v=1778275489"},{"product_id":"mantagua-batz-eclairage-led-penderie-200lm-3000k-blanc-chaud","title":"BATZ - LED locker lighting - 200lm - 3000K warm white","description":"\u003cp\u003e\n    The \u003cstrong\u003eMantagua BATZ\u003c\/strong\u003e LED locker lighting is an interior lighting solution designed specifically for marine environments. With a luminous flux of 200 lumens and a color temperature of 3000 K (warm white), this fixture provides sufficient and pleasant lighting for lockers and storage spaces aboard. Its aluminum construction ensures robustness and durability suited to the constraints of the nautical environment.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMantagua BATZ\u003c\/strong\u003e stands out for its versatile power input range of 10 to 30 VDC, making it compatible with most boat electrical systems, whether 12 V or 24 V. This flexibility simplifies integration without requiring an additional converter. Weighing only 85 g, it minimizes structural impact and allows for easy installation. Unlike general-purpose lighting solutions such as the Mantagua range of ceiling lights (e.g., NANO or MAGELLAN) designed for broader diffusion, the BATZ is optimized for a targeted application, providing concentrated light where it is most needed.\n\u003c\/p\u003e\n\u003ch3\u003eDurability and reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Made of aluminum, the \u003cstrong\u003eMantagua BATZ\u003c\/strong\u003e is resistant to corrosion and vibrations, critical factors in a marine environment. This material quality ensures a long product lifespan, backed by a 2-year warranty. Although not designed for outdoor use, its aluminum housing is a guarantee of robustness for intensive indoor use, outperforming less resistant plastic solutions often found in the consumer market. It positions itself as a reliable option for owners with high standards for marine equipment.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750667698516,"sku":"01901","price":136.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_eef332e1-fbc2-4edd-9dd2-ea6b0f10b2da.jpg?v=1778275504"},{"product_id":"mantagua-haiti-spot-led-blanc-rouge-inox-poli-miroir-etanche-ip67-standard-avec-interrupteur","title":"White+red polished stainless steel - 20W - IP67 waterproof - standard with switch","description":"\u003cp\u003e\n    The recessed LED spot \u003cstrong\u003eMANTAGUA Haïti standard with switch\u003c\/strong\u003e combines functionality and design for cabin lighting. This standalone version features dual warm white (3000 K) and red lighting, along with an integrated dimmer, offering flexible lighting ambiance. With a power consumption of only 2.8 W for a luminous flux of 135 lm, it is an energy-efficient solution equivalent to a 10 W halogen light.\n\u003c\/p\u003e\n\u003ch3\u003eRobust design and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    Made of polished stainless steel and PMMA, the MANTAGUA Haïti ensures optimal durability in marine environments. Its IP67 waterproof rating guarantees full protection against dust and temporary immersion, while its IK06 impact resistance rating makes it robust against shocks. The power supply is compatible with 9-30 VDC systems, offering versatile installation across different types of vessels. Its 120° beam angle ensures wide and uniform light diffusion.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning within the Haïti range\u003c\/h3\u003e\n\u003cp\u003e\n    Within MANTAGUA’s Haïti range, this \"standard with switch\" model is designed for simple and direct installations where localized control is sufficient. Unlike the \"master\" and \"slave\" versions that form a chained system to control up to 20 spots from multiple points, the Haïti standard is ideal for independent cabin lighting or areas requiring a dedicated switch. Its ultra-thin design (1 mm trim, 16 mm total thickness) allows for discreet and elegant integration, competing with similar solutions from brands like Hella Marine or Lumishore for compact and high-performance interior lighting applications.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    The Haïti spot is recessed-mounted, facilitated by the two included springs. It comes with 10 cm of electrical wire for easy connection. Its lightweight design of 47g simplifies installation on various surfaces. The polished stainless steel finish adds an aesthetic touch, while the 2-year warranty reflects MANTAGUA’s confidence in the reliability of its products. This model is a reliable solution for high-performance and durable marine lighting.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750668452180,"sku":"01957","price":59.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_8799447b-53b8-4ca5-8997-c4b661680de6.jpg?v=1778275522"},{"product_id":"mantagua-haiti-spot-led-maitre-blanc-rouge-inox-poli-ip67","title":"White+red polished stainless steel - 20W - IP67 waterproof - master with switch","description":"\u003cp\u003e\n    The MANTAGUA Haïti master recessed LED spot is an advanced marine lighting solution combining functionality and robustness. This specific model, in polished stainless steel finish, is a master unit with an integrated switch, offering dual-color lighting: warm white (3000 K) and red, suitable for various onboard situations. With a power of 2.8 W and a luminous flux of 135 lumens, it provides an equivalent alternative to a 10 W halogen light while optimizing the electrical consumption of your 9-30 VDC system.\n\u003c\/p\u003e\n\u003ch3\u003eMaster\/Slave System and Integrated Dimming\u003c\/h3\u003e\n\u003cp\u003e\n    This spot stands out for its integration into the MANTAGUA Haïti master\/slave system, allowing up to 20 spots to be chained and controlled from multiple points in the cockpit or bridge. Unlike slave versions (such as 01960 or 01961), this master unit includes a dimmer for precise light intensity adjustment. The standard Haïti model (e.g., 01957 for the white+red version with switch) offers similar functionality but without the ability to control an extended network of spots.\n\u003c\/p\u003e\n\u003ch3\u003eRobust and Versatile Design\u003c\/h3\u003e\n\u003cp\u003e\n    Made of polished stainless steel and PMMA, the \u003cstrong\u003eMANTAGUA Haïti master\u003c\/strong\u003e is designed to withstand the most demanding marine environments, as evidenced by its IP67 waterproof rating and IK06 impact resistance. Its 120° beam angle ensures even light diffusion, while the warm white and red lighting options cater to visual comfort and night vision preservation needs. Its ultra-thin design with a 1 mm bezel and recessed mounting using two included springs allows discreet integration into cabin ceilings, with dimensions of Ø 72 mm for a cutout diameter of Ø 54 mm and a depth of 15 mm.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750668943700,"sku":"01958","price":59.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_0d67f2b7-51b3-4368-9320-f24e852a75c8.jpg?v=1778275540"},{"product_id":"mantagua-tudy-inox-noir-spot-led-etanche-ip67-interrupteur","title":"Tudy Inox Black - 10W - IP67 Waterproof - with Push Button Switch","description":"\u003cp\u003e\n    The MANTAGUA \u003cstrong\u003eTudy Inox Black recessed LED spot\u003c\/strong\u003e (reference 01994) is a marine lighting solution optimized for demanding environments. This 1.9 W luminaire delivers a luminous flux of 140 lumens at a color temperature of 3000 K (warm white), equivalent to a 10 W halogen bulb with minimal energy consumption. Designed for a 9 to 30 VDC power supply, it features a push-button switch for direct and convenient control.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eTudy Inox Black\u003c\/strong\u003e stands out with its ABS body construction and polished 316L stainless steel front with black finish, ensuring enhanced durability in marine environments. Its IP67 waterproof rating makes it suitable for indoor installation, including showers, or outdoor use, resisting water splashes and temporary immersion. The IK06 impact resistance rating ensures good shock resistance. With a 120° beam angle, it provides wide and uniform light diffusion. It is equipped with CREE® LEDs known for their reliability and efficiency.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Positioning in the MANTAGUA Range\u003c\/h3\u003e\n\u003cp\u003e\n    Part of MANTAGUA’s Capri range, the 1.9 W Tudy Inox Black model is positioned as a high-performance and compact option. Compared to the 2.4 W versions that offer a 250-lumen flux, this 1.9 W spot is ideal for ambient lighting or areas requiring moderate light intensity. MANTAGUA also offers versions without a switch (references 01875, 01877, 01879) that are dimmable with the Mantagua dimmer (reference 01159), providing flexibility for integration into more complex lighting systems. Its IEC60945 certification ensures no interference with VHF and AIS systems, a critical criterion for the safety and performance of navigation equipment. The recessed installation is simplified by two included springs, with a 1 mm ultra-thin trim ring for discreet integration on Ø 54 mm surfaces.\n\u003c\/p\u003e","brand":"MANTAGUA","offers":[{"title":"Default Title","offer_id":55750669304148,"sku":"01994","price":34.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_417aae1a-0056-4757-9a3e-0729d3f77295.jpg?v=1778275560"},{"product_id":"garmin-lux-dl65-downlight-5w-chrome-bezel-eclairage-marin","title":"LUX DL65, 5W downlight, chrome bezel","description":"\u003cp\u003e\n    The Garmin LUX DL65 downlight, also known as the Lumishore LUX DL65, is a versatile lighting solution designed for marine indoor and outdoor environments. With a power output of 5 watts, it provides full-spectrum CRGBW (cool white, red, green, blue, warm white) illumination. This downlight features tunable white color temperature, ranging from 2,700 K (warm white) to 6,500 K (cool white), and is dimmable as standard. Its hard-anodized aluminum body and chrome trim ensure resistance to marine conditions. It is rated IP68, providing protection against dust and temporary immersion.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and control\u003c\/h3\u003e\n\u003cp\u003e\n    The LUX DL65 downlight requires a Lumishore Lux Downlight control module (or Lux Light Control Module) to function, allowing control of up to 16 downlights per module. For advanced integration with multifunction displays (MFD) or Lumishore screens, a Lumi-Link command center is required. This architecture ensures centralized and synchronized lighting management. Control options include a compatible MFD, a Lumishore screen, a smart device, or a momentary switch.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications and installation\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for simple 3-wire installation, the LUX DL65 operates on a DC voltage of 10.5 to 31V. Typical current draw is 0.45A at 12V and 0.23A at 24V, with a maximum current of 0.6A\/0.3A. Installation requires a 65 mm diameter hole. The downlight can be mounted using supplied spring clips for indoor installations or secured with countersunk screws and marine-grade adhesive\/sealant for outdoor or wet areas. Its front diameter (trim) is 82 mm. The Lumishore product range, to which the DL65 belongs, is known for its integrated lighting ecosystem, offering an alternative to basic solutions or proprietary systems from brands like Garmin or Raymarine, which do not always provide the same level of CRGBW customization or centralized lighting management capabilities.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008702361940,"sku":"010-04439-00","price":158.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_b4341afa-4da9-452b-bf6d-1e3d72f15840.jpg?v=1780432543"},{"product_id":"garmin-lux-dl50-downlight-eclairage-marin-crgbw","title":"LUX DL50, 5W downlight, white trim ring","description":"\u003cp\u003e\n    The Garmin LUX DL50 downlight is a versatile marine lighting solution designed for indoor and outdoor installations on vessels. This 5-watt recessed luminaire delivers full-spectrum CRGBW lighting (cool white, red, green, blue, warm white) with adjustable white color temperature ranging from 2700K (warm white) to 6500K (cool white). It features an ultra-thin 2mm front protrusion profile for discreet integration into flat surfaces.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Design and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Constructed with hard-anodized aluminum body and white bezel, the LUX DL50 is rated IP68, providing complete protection against dust and temporary immersion, making it suitable for damp areas but not designed for permanent submersion. It operates on a voltage range of 10.5 to 31V DC, with typical consumption of 0.37A at 12V or 0.18A at 24V, for an average power of 6W. Its front diameter is 64mm and requires a 50mm cutout for installation, with a mounting depth of 30.3mm.\n\u003c\/p\u003e\n\n\u003ch3\u003eSystem Integration and Control\u003c\/h3\u003e\n\u003cp\u003e\n    The LUX DL50 downlight is designed to operate exclusively with the Lumishore LUX Downlight control module, which manages dimming and color functions. It offers control flexibility via a momentary switch, with advanced integration capability to compatible multifunction displays (MFD), Lumishore displays, or smart devices via an EOS-LUX control center (sold separately). Each LUX control module can support up to 16 DL50 downlights, providing scalability for complex onboard lighting installations. The manufacturer warranty is three years, covering manufacturing defects under proper installation conditions.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008702886228,"sku":"010-04440-00","price":110.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_4ae43524-850e-4655-af1b-7f10c22ce4f6.jpg?v=1780432561"},{"product_id":"garmin-lux-dl50-downlight-5w-eclairage-marin","title":"LUX DL50, 5W downlight, black trim","description":"\u003cp\u003e\n    Designed for versatile marine lighting, the \u003cstrong\u003eGarmin LUX DL50\u003c\/strong\u003e 5-watt downlight with black trim is a deck and interior lighting solution. It features full-spectrum CRGBW lighting, including dedicated LEDs for cold white, red, green, blue, and warm white. The white temperature is adjustable from 2700K (warm white) to 6500K (cold white), providing flexibility for different ambiances or functional needs. This fixture is fully dimmable as standard.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The LUX DL50 is built with hard-anodized aluminum and a fully sealed body, giving it an IP68 rating. This makes it suitable for use in damp areas, both inside and outside the boat, though it is not designed for permanent submersion. Its ultra-thin 2 mm (0.079 in) profile after installation and 64 mm (2.52 in) front diameter allow for discreet integration. The required cut-out diameter is 50 mm (2 in) with a mounting depth of 30.3 mm (1.2 in).\n\u003c\/p\u003e\n\n\u003ch3\u003ePower and Control\u003c\/h3\u003e\n\u003cp\u003e\n    Operating on a voltage range of 10.5 to 31V DC, the downlight has a maximum current draw of 0.5A at 12V and 0.25A at 24V, with an average power consumption of 6W. Electrical installation is simplified with a 3-wire wiring. For advanced control, the LUX DL50 can be connected to a Lumishore LUX control module (not included) or an EOS-LUX command center, enabling integration with compatible multifunction displays (MFD), Lumishore screens, or smart devices. A single Lumishore LUX control module can manage up to 16 downlights. Mechanical installation is via spring clips for interior environments, or with marine-grade adhesive\/sealant for exterior or damp areas after removing the clips. A 3-year warranty applies to this product.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008707899732,"sku":"010-04447-00","price":110.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_08230334-6016-4a4d-9ada-60d18c0a70af.jpg?v=1780433014"},{"product_id":"garmin-lux-dl65-ag-projecteur-encastre-anti-eblouissement-5w-chrome","title":"LUX DL65 AG, recessed anti-glare downlight 5 W, chrome trim ring","description":"\u003cp\u003e\n    Designed for interior lighting on vessels, the Garmin LUX DL65 AG recessed anti-glare downlight provides a versatile and integrable lighting solution. This 5-watt downlight features an anti-glare beam, ideal for spaces requiring soft and controlled light, particularly in low-ceiling areas. It stands out with its ability to emit a full CRGBW color spectrum (cool white, red, green, blue, warm white) and adjustable white temperature from 2700K (warm white) to 6500K (cool white).\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Integration and Control\u003c\/h3\u003e\n\u003cp\u003e\n    The Garmin LUX DL65 AG is not a standalone light; it requires a connection to the Lumishore Lux Downlight module to operate, ensuring centralized management and optimal compatibility. It is dimmable by default and can be controlled via a momentary switch. For deeper integration, particularly with compatible Garmin multifunction displays (MFD) or Lumishore screens, a Lumishore Lux Light Control module and a Lumi-Link control hub are required. A single Lux Light control module can manage up to 16 DL65 downlights, offering flexibility for complex installations.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Design and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With a hard-anodized aluminum body and a chrome (polished stainless steel) trim ring, the LUX DL65 AG is designed to withstand marine environments. Its IP68 rating ensures high protection against dust and water immersion. The downlight installs into a 65 mm diameter hole and has a front diameter of 82 mm. Powered by a 10.5 to 31 V DC voltage range, it draws a maximum current of 0.6 A at 12 V and 0.3 A at 24 V. Installation is secured with spring clips for interior applications, or with marine-grade adhesive and countersunk screws for enhanced security. Note that this model is designed for indoor use only, as specified in the Lumishore installation guide.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008708260180,"sku":"010-04450-00","price":183.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_2290b3a1-f7a8-41d1-9a69-890920977918.jpg?v=1780433049"},{"product_id":"garmin-eclipse-dl55-downlight-bleu-finition-blanche-eclairage-marin","title":"ECLIPSE DL55, blue dome light, white finish","description":"\u003cp\u003e\n    Designed for deck and cabin lighting, the Garmin ECLIPSE DL55 downlight in its blue version with white finish (SKU 010-04471-00) provides a versatile marine LED lighting solution. This model features two 3W blue LEDs, ideal for creating subtle ambiance or applications requiring low-intensity lighting. Part of the ECLIPSE DL55 range, it differs from bicolor (blue and white) or RGB versions by offering dedicated monochrome functionality. Other finishes such as black or chrome, as well as white (5000 K) or RGB LED colors, are available within the same series, allowing adaptation to aesthetic preferences and specific vessel needs.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and technical integration\u003c\/h3\u003e\n\u003cp\u003e\n    The ECLIPSE DL55 downlight operates on 10 to 15 VDC, specifically designed for 12V boat electrical systems. Its maximum current draw is 0.4 A at 12V, with an average power consumption of 4.8 W, providing energy efficiency for continuous lighting. Electrical installation is simplified with a two-wire connection. This luminaire is rated IP68 for dust and water resistance, making it suitable for both indoor and outdoor installations, including damp areas, though not designed for permanent submersion. Its robust construction features anodized aluminum with E-coating and powder paint, and a glass faceplate, ensuring durability in marine environments. With a shallow mounting depth of 21.2 mm (0.83 in) and a cutout diameter of 50.8 mm (2.0 in), it integrates discreetly into various layouts. Installation is facilitated by spring clips for indoor applications, while marine sealant is recommended for outdoor or damp areas.\n\u003c\/p\u003e\n\u003ch3\u003eControl options and positioning\u003c\/h3\u003e\n\u003cp\u003e\n    The ECLIPSE DL55 downlight can be controlled via a standard on\/off switch, with dimming available for monochrome models or color change for bicolor versions. For advanced control, it can be integrated with the Garmin ECLIPSE Command Center. This integration enables lighting control via compatible multifunction displays (MFD) or smart devices, offering operational flexibility. It is important to note that the DL55 is not compatible with third-party lighting control systems or non-Garmin dimmers, positioning it as part of the proprietary ECLIPSE lighting system. Compared to more complex solutions from competitors like Lumishore, which offer DMX\/SMX systems with granular control and advanced effects, the Garmin DL55 focuses on a reliable recessed lighting solution that is easy to integrate into a Garmin ecosystem, with simple installation and use for general and ambiance lighting needs.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008716255572,"sku":"010-04471-00","price":88.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_b9652531-4dd7-411d-8aba-dfc4171d0246.jpg?v=1780433375"},{"product_id":"garmin-eclipse-dl55-downlight-bleu-noir-marine","title":"ECLIPSE DL55, blue dome light, black finish","description":"\u003cp\u003e\n    The Garmin ECLIPSE DL55 downlight, with its black finish and blue lighting, is designed for indoor and outdoor overhead lighting on boats. Part of the Lumishore ECLIPSE range, it is suited to marine environments thanks to its fully watertight design and IP68 certification for protection against dust and temporary immersion.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This downlight integrates two 3W blue LEDs, offering an average consumption of 4.8 W and a current draw of 0.4 A at 12V. It is exclusively intended for 12V electrical systems, with an operating range of 10 to 15 VDC. Its robust construction includes a durable aluminum body with anodized and powder-coated finish, along with a glass front. The shallow 3.5 mm (0.137 in) profile and 21.2 mm (0.834 in) mounting depth facilitate integration into tight spaces. The DL55 emits an ultra-wide beam for efficient light coverage.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Control\u003c\/h3\u003e\n\u003cp\u003e\n    The ECLIPSE DL55 downlight installation is designed to be versatile. For indoor applications, stainless steel spring clips are provided. For outdoor installations or in damp areas, the use of marine-grade sealant\/adhesive is recommended for secure mounting. The required cutout diameter is 50.8 mm (2.0 in). This luminaire can be controlled via a simple on\/off switch or integrated into an ECLIPSE Command Center system, offering control options via a compatible multifunction display or smart device. A three-year warranty accompanies this product.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008717762900,"sku":"010-04472-00","price":88.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_3f52f57d-423a-4426-aedb-e1e9a638134f.jpg?v=1780433394"},{"product_id":"garmin-eclipse-dl55-downlight-blanc-eclairage-marine","title":"ECLIPSE DL55, white recessed light, white finish","description":"\u003cp\u003e\n    Designed for general lighting on boats, the \u003cstrong\u003eECLIPSE DL55 downlight from Garmin\u003c\/strong\u003e in white finish is a versatile LED marine lighting solution. It is part of the ECLIPSE collection by Lumishore, known for its customizable LED lighting systems. This specific model, 010-04473-00, delivers white lighting (5000 K) using two 3W white LEDs. Its design allows installation both indoors and outdoors, including in the boat’s wet areas, thanks to its robust construction and IP68 rating.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Control\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eECLIPSE DL55\u003c\/strong\u003e offers flexible control options to suit various needs. It can be wired and operated via a simple on\/off switch for basic use. For extended features, it is compatible with the ECLIPSE control center (sold separately), enabling dynamic effects such as strobe, color cycling, and sound synchronization for White + RGB models, or color change for bicolor versions. This modular approach sets it apart from more monolithic competitors, which may require specific control systems or offer less customization. It is designed for 12V DC electrical systems, with an operating range of 10 to 15V DC, a typical power consumption of 4.8W, and a current draw of 0.4A at 12V.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Constructed with a durable aluminum body, E-coating and powder coating, and a glass front, the \u003cstrong\u003eDL55 downlight\u003c\/strong\u003e is built to withstand marine environments. Its shallow installation profile, with a mounting depth of 21.2 mm (0.83 inches) and a cutout diameter of 50.8 mm (2.0 inches), makes it easy to integrate into tight spaces on boat ceilings. The mounting clearance diameter, including the trim ring, is 64 mm (2.52 inches), with a front protrusion of 3.5 mm (0.137 inches). Mechanical installation uses stainless steel spring clips for indoor applications, or marine-grade adhesive\/sealant for outdoor or wet-area installations.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008718123348,"sku":"010-04473-00","price":91.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_fb7bfb93-d8d5-40e2-b0aa-e051f045c2b1.jpg?v=1780433411"},{"product_id":"garmin-eclipse-dl55-downlight-led-blanc-noir","title":"ECLIPSE DL55, white ceiling light, black finish","description":"\u003cp\u003e\n    Designed for general lighting aboard, the Garmin ECLIPSE DL55 downlight is a versatile solution for indoor and outdoor applications. Part of the Lumishore ECLIPSE range, this flush-mount luminaire is equipped with 2 white 3W LEDs, offering a typical power consumption of 4 watts and a current draw of 0.33A at 12 volts DC.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Design and Flexible Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The DL55 features a durable aluminum body with a glass front, providing IP68 protection against dust and temporary immersion, making it suitable for wet areas without being designed for permanent submersion. Installation is simplified with stainless steel spring clips for indoor mounting, while for outdoor or wet environments, a marine-grade adhesive\/sealant is recommended after removing the clips and black gasket. The front bezel diameter is 64.0 mm (2.519 in), with a depth of 21.2 mm (0.834 in) and a profile of 3.5 mm. The required cutout diameter is 50.8 mm (2.0 in).\n\u003c\/p\u003e\n\n\u003ch3\u003eControl and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Operating exclusively on 12V DC systems (10-15V DC range), the ECLIPSE DL55 downlight integrates via simple 2-wire wiring. It can be controlled by a standard on\/off switch or via the ECLIPSE Command Center system, allowing control from a compatible multifunction display or smart device. The DL55 series is available in various color options (white, blue, blue\/white bicolor, white\/RGB) and finishes (white, black), with model 010-04474-00 being specifically white with a black finish.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008718647636,"sku":"010-04474-00","price":88.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_e2e503a9-fb2a-4415-b115-fb9ec36b9b2e.jpg?v=1780433429"},{"product_id":"garmin-eclipse-dl55-downlight-led-bicolore-bleu-et-blanc","title":"ECLIPSE DL55, blue and white recessed light, white finish","description":"\u003cp\u003e\n    Designed for general cabin lighting, the \u003cstrong\u003eGarmin ECLIPSE DL55\u003c\/strong\u003e dual-color (blue and white) downlight is a versatile marine LED solution. Intended for boats operating on 12V, it operates within a 10 to 15V DC range with a maximum current draw of 0.4A at 12V and an average power consumption of 4.8W. This model stands out for its ability to provide dual-color lighting, allowing switching between blue and white to adapt to ambiance or navigation conditions.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The ECLIPSE DL55 features two 3W blue LEDs and two 3W white LEDs (5000K), delivering an ultra-wide beam for optimal coverage. Its robust construction includes an aluminum body with electrophoretic and thermo-lacquered coating, along with a glass front, ensuring durability in marine environments. Rated IP68, it is fully dust- and waterproof, making it suitable for indoor and outdoor installations in damp areas, though not designed for permanent submersion.\n\u003c\/p\u003e\n\u003cp\u003e\n    Installation of this downlight is simplified with a 2-wire wiring system. With a shallow 21.2mm flush-mount profile and a 50.8mm (2-inch) cutout diameter, it fits easily into tight spaces. Mounting is done on a flat surface, either using spring clips for indoor installations or marine-grade adhesive\/sealant for exposed areas. Control can be via a simple on\/off switch or, for advanced features, by connecting to an ECLIPSE Command Center, enabling management from a compatible multifunction display (MFD) or smart device. Unlike other marine lighting systems, it is not compatible with third-party controllers or unspecified dimmers.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning in the Garmin ECLIPSE Range\u003c\/h3\u003e\n\u003cp\u003e\n    The DL55 is part of Garmin’s ECLIPSE range (formerly Lumishore), a series dedicated to marine lighting. While other models such as the 60-0483 (white light only) or 60-0481 (blue light only) offer single-color options, the DL55 provides dual-color flexibility. It positions itself as an intermediate option compared to the White + RGB versions (60-0570), offering a balance between functionality and ease of integration for basic or evolving lighting needs via the Command Center. The 3-year warranty attests to its standing in the reliable marine equipment market.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008719368532,"sku":"010-04475-00","price":102.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_1a879f10-42e3-4edd-992c-2f8f45a2f68f.jpg?v=1780433445"},{"product_id":"garmin-eclipse-dl55-downlight-rgb-blanc","title":"ECLIPSE DL55, flush-mount white ceiling light + RGB, white finish","description":"\u003cp\u003e\n    Designed for 12V boats, the Garmin ECLIPSE DL55 White + RGB (white finish) downlight is a versatile lighting solution for marine indoor and outdoor applications. This fixture provides pure white lighting at 5000K along with a full RGB color spectrum, allowing for 16.7 million color variations to suit any ambiance. Its fully sealed, IP68-rated design ensures resistance to dust and temporary immersion, making it suitable for wet areas, though it is not intended for permanent submersion.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    The ECLIPSE DL55 downlight stands out for its ease of installation thanks to simple two-wire wiring. It is compatible with a voltage range of 10 to 15 VDC, specifically for 12V boat systems. With a maximum current draw of 0.4 A and an average power consumption of 4.8 W, it delivers efficient lighting without overloading the boat’s electrical system. Its compact dimensions, with a mounting depth of 21.2 mm and a front protrusion of only 3.5 mm, facilitate integration in various locations. The required cutout diameter for installation is 50.8 mm. For indoor installations, spring clips are provided, while for outdoor or wet areas, the use of marine-grade sealant\/adhesive is recommended.\n\u003c\/p\u003e\n\u003ch3\u003eControl options and positioning in the range\u003c\/h3\u003e\n\u003cp\u003e\n    Lighting control can be done via a simple on\/off switch for basic functions such as white lighting, color cycling, and pause. For advanced control and extended customization options, the ECLIPSE DL55 downlight is designed to be used with the ECLIPSE Command Center, enabling control via an MFD or smart device. Unlike single-color (blue, white) or two-color (blue and white) ECLIPSE models, this White + RGB version offers maximum chromatic flexibility, positioning the DL55 as the preferred choice for users seeking dynamic ambient lighting. It is not compatible with third-party lighting control products or dimmers.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008741618004,"sku":"010-04540-00","price":110.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_78c1eaa5-8e66-4906-aea8-00fee32d8d52.jpg?v=1780434306"},{"product_id":"garmin-eclipse-dl55-downlight-led-marine-rgb","title":"ECLIPSE DL55, white ceiling light + RGB, black finish","description":"\u003cp\u003e\n    The Garmin ECLIPSE DL55 downlight, with its black finish, is a versatile LED lighting solution designed for marine interior and exterior applications. This fixture combines white lighting (5000 K) and a full RGB color spectrum, providing flexibility for various onboard ambiances. Its robust construction and IP68 rating ensure resistance to demanding marine environments, allowing installation in wet areas without risk of permanent submersion.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The DL55 is equipped with four 3 W LEDs (one each for red, green, blue, and white), delivering an average luminous power of 4.8 W, with a maximum current draw of 0.4 A at 12 V. It is specifically designed to operate on 12 V boat electrical systems, with an operational voltage range of 10 to 15 VDC. Its shallow 21.2 mm flush-mount profile and 50.8 mm cutout diameter facilitate integration into tight spaces. The construction features a durable aluminum body with electrophoretic and thermo-lacquered coating, and a glass front, ensuring robustness suitable for marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eControl Options and Installation Versatility\u003c\/h3\u003e\n\u003cp\u003e\n    The ECLIPSE DL55 downlight can be controlled via a simple on\/off switch, allowing activation of white light or cycling through colors. For advanced control, it is compatible with the ECLIPSE Command Center (sold separately), enabling control via compatible multifunction displays (MFD), smart devices, or a momentary switch. For mechanical installation, stainless steel spring clips are provided for interior mounts. For exterior applications or wet areas, the fixture should be secured with appropriate marine sealant\/adhesive, removing the spring clips and black gasket for optimal sealing. The downlight carries a 3-year warranty.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008741716308,"sku":"010-04541-00","price":110.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_56773e4a-ade0-47c1-b2fa-64c1b8dee7d6.jpg?v=1780434325"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/3826feeb0814f1c2258e74282a6c613d.png?v=1779972639","url":"https:\/\/skysat.fr\/en-us\/collections\/cabin-lights.oembed","provider":"Skysat","version":"1.0","type":"link"}