{"title":"Environmental sensors","description":"\u003ch2\u003eEnvironmental sensors: measuring conditions that influence the boat and its systems\u003c\/h2\u003e\n\u003cp\u003eEnvironmental sensors enhance onboard electronics by measuring physical conditions around the boat or technical installations: solar irradiance, temperature, pressure, humidity, brightness, or parameters useful for diagnostics. This collection includes sensors that are neither standard navigation probes nor fluid level sensors, but provide contextual data that can be used by a monitoring system.\u003c\/p\u003e\n\n\u003ch2\u003eFor solar, local weather, and technical monitoring\u003c\/h2\u003e\n\u003cp\u003eA sensor such as the Victron SolarSense allows tracking solar production by measuring actual sunlight and associated temperatures. This data helps interpret the performance of \u003ca href=\"\/en-us\/collections\/panneaux-solaires\"\u003esolar panels\u003c\/a\u003e and \u003ca href=\"\/en-us\/collections\/regulateurs-solaires\"\u003esolar charge controllers\u003c\/a\u003e: an MPPT that charges little does not have the same meaning under overcast skies, a hot panel, or a wiring fault.\u003c\/p\u003e\n\n\u003ch2\u003eConnection to onboard networks\u003c\/h2\u003e\n\u003cp\u003eDepending on the product, data can be transmitted to an NMEA 2000 network, VE.Can, a GX device, or a proprietary interface. The choice of sensor therefore depends as much on the measured parameter as on its integration with the existing ecosystem: chartplotter, gateway, display, Cerbo GX, cloud supervision, or diagnostic software.\u003c\/p\u003e\n\n\u003ch2\u003eSelection criteria\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMeasured parameters:\u003c\/strong\u003e irradiance, ambient temperature, panel temperature, pressure, humidity, or brightness.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible network:\u003c\/strong\u003e NMEA 2000, VE.Can, GX, Bluetooth, USB, or analog output.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRange and accuracy:\u003c\/strong\u003e verify according to use, especially for comparing solar output and actual conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e outdoor mounting, UV exposure, IP rating, cables, and connectors suitable for the marine environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSkysat advice\u003c\/h2\u003e\n\u003cp\u003eAn environmental sensor is most useful when it informs a decision: solar production diagnostics, energy bank monitoring, temperature alarm, or performance analysis. Before adding one, check where the data will be displayed and how it will be processed by the onboard system.\u003c\/p\u003e","products":[{"product_id":"nke-barometre-hr-100-nmea-topline-alarmes","title":"HR 100 barometer with NMEA outputs and alarms","description":"\u003cp\u003e\n    Designed for demanding navigation, the NKE HR 100 barometer (reference 90-60-358) provides precise atmospheric pressure and trend measurements. This instrument delivers instant data on pressure and its variation over the last 10 hours, critical information for anticipating weather at sea. With a resolution of 0.01 mbar and a relative accuracy of +\/-0.5 mbar (at 25°C, from 800 to 1100 mbar), it is a reliable sensor for onboard systems. It also integrates air temperature measurement with a resolution of 0.01 °C and an accuracy of +\/-0.8 °C at 20°C.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced integration and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The HR 100 barometer stands out for its dual connectivity. It features NMEA 0183 outputs (yellow wire) transmitting MMB, MTA, and XDR sentences for atmospheric pressure and air temperature, ensuring broad compatibility with marine electronic equipment. Simultaneously, it integrates into the Topline bus of NKE systems, enabling centralized data management and settings. These dual connections can operate simultaneously, providing installation and usage flexibility. For users of NKE systems, parameters such as offset and damping are managed via the Topline display, optimizing data consistency.\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecific features and durability\u003c\/h3\u003e\n\u003cp\u003e\n    Beyond its barometric functions, the HR 100 offers an additional engine hours logging feature. By connecting a red wire to the engine switch (+12V after ignition), the device records engine runtime in tenths of an hour. Configurable alarms are available for pressure variation, high and low pressure thresholds, and exceeding a critical engine hours duration. Weighing 270 grams (5-meter cable included), operating on 10 to 16Vdc power, and consuming 25mA, it is designed for the marine environment. Its IP54 waterproofing provides protection against water splashes and dust, making it suitable for protected installations aboard. For full integration into an NKE system, the TOPLINE connection box (ref. 90-60-121) is available as an accessory.\n\u003c\/p\u003e","brand":"Nke","offers":[{"title":"Default Title","offer_id":53723751121236,"sku":"PF000126","price":285.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f64361f4-15a7-4f69-a501-f9a17570b8dd.jpg?v=1779962869"},{"product_id":"garmin-adaptateur-nmea-2000-capteur-vitesse-temperature-eau-gst-10","title":"NMEA 2000 adapter for Garmin GST™ 10 surface speed\/temperature water sensor","description":"\u003cp\u003e\n    Designed for marine system upgrades, the Garmin GST™ 10 NMEA 2000 adapter (part number 010-11328-00) converts analog data from speed and water temperature sensors into a digital NMEA 2000® signal. This solution allows boat owners to integrate existing sensors, such as the Garmin through-hull speed\/temperature sensor (Airmar ST850) 010-11413-00 or the Garmin transom-mount speed sensor 010-10279-02, into their NMEA 2000 network without requiring a full instrumentation replacement.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    The GST™ 10 adapter connects directly to compatible sensors, eliminating the need for additional wiring or cutting. It transmits water speed and surface temperature data to compatible Garmin displays, such as the GPSMAP series or the GMI™ 20 marine instrument display, via the NMEA 2000 network. The device supports an operating temperature range of -15°C to 70°C and is waterproof to IEC 60529 IPX7 standards, ensuring immersion up to 1 meter for 30 minutes. Its compact dimensions (24.7 x 17.0 x 78.6 mm) and weight of 380 g facilitate installation within 4.4 meters of the sensor.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Garmin positioning\u003c\/h3\u003e\n\u003cp\u003e\n    While newer products often integrate NMEA 2000 connectivity directly into sensors, the GST™ 10 targets the upgrade market specifically. It stands as a cost-effective solution to extend the lifespan of existing Garmin analog sensors rather than replacing them with native NMEA 2000 models such as the Airmar DST810 through-hull speed\/temperature transducer, which includes direct NMEA 2000 connectivity. With a maximum power consumption of 0.9 W and a LEN of 1, it integrates discreetly into the network without overloading the bus. Data configuration, including speed calibration and temperature source assignment, is performed via connected Garmin display units.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008763310420,"sku":"010-11328-00","price":104.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_f1b0f314-60d4-4aab-b28e-beceeae9bf10.jpg?v=1780435295"},{"product_id":"garmin-gtemp-10-th-capteur-temperature-traversant","title":"GTEMP 10-TH Through-hull Temperature Sensor","description":"\u003cp\u003e\n    Designed for accurate and rapid monitoring of water temperature, the \u003cstrong\u003eGTEMP 10-TH\u003c\/strong\u003e through-hull sensor from Garmin is a dedicated solution for marine environments. It integrates via the NMEA 2000® network, enabling smooth data transmission to compatible displays. This sensor is particularly useful for monitoring live wells, bait wells, and fishing zones.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccuracy and NMEA 2000 Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin GTEMP 10-TH\u003c\/strong\u003e offers a temperature detection range from -25 to 60 °C, with fast response and high sensitivity, essential for applications where thermal variation is a key factor. Unlike temperature sensors integrated into multifunction probes, the GTEMP 10-TH is a dedicated sensor, which can result in faster response and targeted measurement in its installation environment. Its NMEA 2000® integration ensures plug-and-play connectivity with existing systems, simplifying the addition of temperature data to a Garmin, B\u0026G, or Raymarine navigation network.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With compact dimensions, a length of 70 mm, and a thread diameter of 25.1 mm, the \u003cstrong\u003eGTEMP 10-TH\u003c\/strong\u003e sensor is designed for through-hull installation. It is compatible with hull thicknesses ranging from 0 to 57 mm. Its flush design minimizes turbulence under the hull. The device consumes 0.24 W (20 mA at 12V) and operates within a voltage range of 9 to 32 Vdc. It allows each sensor to be individually named on the display, a practical feature for distinguishing data from multiple live wells, for example. The sensor comes with a 1.8 m cable and an NMEA 2000® T-connector.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008764293460,"sku":"010-11413-10","price":91.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_452a563f-5493-4c92-8da1-29a60e38771b.jpg?v=1780435423"},{"product_id":"garmin-capteur-temperature-ondeck-surveillance-marine","title":"OnDeck™ Temperature Sensor","description":"\u003cp\u003e\n    Designed for remote monitoring, the \u003cstrong\u003eGarmin OnDeck™ temperature sensor\u003c\/strong\u003e (part number 010-13009-02) integrates with the Garmin OnDeck™ Hub to provide accurate temperature condition tracking. It allows monitoring temperature variations via the ActiveCaptain® app, offering constant visibility of onboard environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eMonitoring capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    This temperature sensor can measure temperatures across a wide range from -50°C to 105°C (-58°F to 221°F). This range makes it suitable for various applications, from managing temperature-sensitive cargo to monitoring equipment or boat compartments.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and applications\u003c\/h3\u003e\n\u003cp\u003e\n    The sensor seamlessly integrates with an existing Garmin OnDeck™ hub, simplifying its addition to a marine monitoring system. Its design ensures accurate readings and resistance to external conditions. It is a tool for monitoring environmental conditions on a boat.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56009466675540,"sku":"010-13009-02","price":20.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_d1cf76b4-c459-489d-b9ff-704fa69c238a.jpg?v=1780440036"}],"url":"https:\/\/skysat.fr\/en-us\/collections\/environmental-sensors.oembed","provider":"Skysat","version":"1.0","type":"link"}