{"title":"GPS","description":"\u003ch2\u003e GPS: Precision at the service of your navigation\u003c\/h2\u003e\n\n\n \u003cp\u003eGPS is much more than just a position indicator; it's the cornerstone of your navigation, your safety management, and the optimization of your performance at sea. At Skysat, drawing on our experience in offshore racing, we select robust and precise GPS devices capable of withstanding the most extreme conditions. Discover here the models and technologies that will guarantee you a reliable position and worry-free navigation.\u003c\/p\u003e\n\n\n\u003ch2\u003e choose the right GPS receiver\u003c\/h2\u003e\n\n\n\u003cp\u003e The quality of the GPS receiver is paramount for fast and accurate position acquisition. Factors such as the number of channels, receiver sensitivity, and compatibility with augmentation systems (WAAS, EGNOS) directly influence performance. A good receiver will minimize signal loss, even in challenging conditions (bad weather, urban areas).\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGarmin Gpsmap 86sci GPS Receiver\u003c\/strong\u003e : Integrates multi-band GNSS technology for increased accuracy.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eFuruno GP-39 GPS Receiver\u003c\/strong\u003e : Standalone solution with 4.2\" LCD screen and NMEA0183 output for connection to other equipment.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eRaymarine RS150 GPS Antenna\u003c\/strong\u003e : High-performance GPS\/GNSS antenna compatible with SeaTalk NG, offering optimal positioning accuracy.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSimrad GS25 GPS Antenna\u003c\/strong\u003e : 10 Hz GPS\/WAAS antenna for fast and accurate acquisition of position data.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e the importance of system integration\u003c\/h2\u003e\n\n\n\u003cp\u003e A high-performance GPS is not enough; its integration within your navigation system is crucial. Compatibility with NMEA 2000 and NMEA 0183 standards allows for seamless data exchange with your other instruments (chartplotter, autopilot, VHF radio). Proper integration ensures increased redundancy and reliability.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eNMEA 2000\u003c\/strong\u003e : Digital communication standard offering simplified connectivity and greater bandwidth.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eNMEA 0183\u003c\/strong\u003e : An older serial communication standard, but still widely used, requiring more complex configuration.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMultiplexer Interfaces\u003c\/strong\u003e : Allow NMEA data to be managed and distributed between different devices.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eChartplotter compatibility\u003c\/strong\u003e : Ensure GPS compatibility with your chartplotter for accurate display of your position on nautical charts.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e key selection criteria\u003c\/h2\u003e\n\n\n\u003cp\u003e Choosing a GPS depends on your specific needs. Consider the size of your boat, the type of navigation you do (coastal or offshore), and your budget. A handheld GPS can be a simple and economical solution for occasional coastal navigation, while an integrated system with an external antenna will be better suited to intensive offshore sailing.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePositioning accuracy\u003c\/strong\u003e : Maximum permissible error depending on your navigation type.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eRobustness and watertightness\u003c\/strong\u003e : Resistance to marine conditions (humidity, vibrations, shocks).\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eElectricity consumption\u003c\/strong\u003e : An important factor, especially for long journeys.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eEase of use\u003c\/strong\u003e : Intuitive interface and ergonomics adapted for use at sea.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cstrong\u003eSkysat's advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e When installing your GPS antenna, be sure to choose a location with an open area, far from any potential interference (masts, radar). A reception test at sea is essential to validate the installation and guarantee optimal performance.\u003c\/p\u003e","products":[{"product_id":"bg-pack-radio-vhf-v100-b-ais-gps-500","title":"VHF Radio Package, V100-B system, AIS+GPS 500","description":"\u003cp\u003e\n    The \u003cstrong\u003eVHF Radio Pack, V100-B system, AIS+GPS 500\u003c\/strong\u003e from B\u0026G is a modular marine communication and safety system. It is built around a \"black box\"-type central unit and integrates a Class D DSC VHF radio, a Class B AIS transponder, and an external GPS antenna. Its NMEA 2000 and NMEA 0183 connectivity links to multifunction displays and onboard instrumentation.\n\u003c\/p\u003e\n\n\u003ch3\u003eClass B VHF and AIS\u003c\/h3\u003e\n\u003cp\u003e\n    The VHF radio has selectable transmit power of 1W or 25W and is certified DSC Class D. The V100-B system differs from the V100 model by its integrated Class B AIS transponder (transmitter and receiver), which transmits the vessel's position and receives data from other AIS-equipped vessels. The pack includes the external GPS-500 antenna, which provides positioning for DSC and AIS functions, including when the black box is installed below deck.\n\u003c\/p\u003e\n\n\u003ch3\u003eModular and scalable design\u003c\/h3\u003e\n\u003cp\u003e\n    The V100-B system supports up to eight handsets in total: four wired H100 handsets (one included) and four wireless H60 handsets (optional), to form an onboard intercom system. It can be connected to up to four external speakers and an optional public address system. This expansion capability makes it suitable for large sailboats and motor yachts.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The \"Track Buddy\" function allows tracking the position of five vessels via their MMSI number. An audio replay memory records the last 60 seconds of incoming communications. The main unit is waterproof to IPX7. The H100 handset features a night mode display, whose backlight can be synchronized with other B\u0026G instruments via NMEA 2000 backlight groups.\n\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"","offer_id":53723165753684,"sku":"000-15793-001","price":1256.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_9bff6eb2-b7a9-4a77-a884-3b0e108b5979.jpg?v=1770917393"},{"product_id":"navico-gps-500-antenne-nais-500-ais","title":"GPS-500 Antenna for NAIS-500","description":"\u003cp\u003e\n    The Navico GPS-500 antenna is an essential accessory designed to optimize the performance of the NAIS-500 Class B AIS transponder. This external antenna provides a reliable and accurate GPS positioning source, complementing or replacing the NAIS-500’s internal GPS antenna. It is indispensable for installations where the AIS transponder is mounted in an environment likely to obstruct GPS signal reception, such as under the deck, inside a metal hull, or near other electronic equipment. By ensuring superior satellite signal acquisition, the GPS-500 antenna guarantees that the NAIS-500’s 50-channel internal GPS receiver, compliant with IEC 61108-1, maintains an optimal position fix for consistent and accurate AIS transmissions.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and performance of the GPS-500\u003c\/h3\u003e\n\u003cp\u003e\n    The GPS-500 antenna connects to the NAIS-500 transponder via a dedicated SMA connector, providing simple and secure integration. This setup allows the antenna to be positioned in the most unobstructed location on the vessel, maximizing sky visibility and GPS signal quality. Robust GPS reception is critical for Class B AIS systems, as it ensures not only the transmission of the vessel’s position coordinates but also accurate calculation of heading and speed. Using an external antenna like the GPS-500 enhances the overall reliability of the AIS system—a critical feature for maritime safety and regulatory compliance. While systems such as the B\u0026G Zeus³S or Garmin chartplotters often integrate high-performance GPS receivers, adding an external antenna to the NAIS-500 ensures equivalent or superior performance under challenging conditions for the specific AIS function.\n\u003c\/p\u003e\n\n\u003ch3\u003eReliability and marine environment\u003c\/h3\u003e\n\u003cp\u003e\n    Although the exact environmental specifications of the GPS-500 antenna are not detailed independently, it is designed to operate in synergy with the NAIS-500 AIS transponder, which itself is IP67 certified for water resistance and capable of operating within a temperature range of -15 °C to +55 °C. This compatibility implies that the GPS-500 antenna is built to withstand the rigors of the marine environment, ensuring consistent durability and performance in the face of weather, spray, and temperature fluctuations. Investing in a dedicated external GPS antenna like the GPS-500 is a proactive measure to maintain AIS data integrity, essential for collision avoidance and the visibility of your vessel to other waterway users.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723745124692,"sku":"000-13613-001","price":140.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e6111eb1-0b57-4210-8d4d-43f45662bc68.png?v=1772639512"},{"product_id":"tallysman-tw3972-antenne-gnss-triple-bande-l-band","title":"SBG - Ellipse D GNSS Triple-Band Antenna with L-Band - TW3972","description":"\u003cp\u003eThe Tallysman TW3972 triple-band GNSS antenna, offered by Pixel sur Mer, is designed for demanding maritime and terrestrial applications requiring high positioning accuracy. Featuring Accutenna® technology, this antenna ensures extended coverage of GNSS constellations, including GPS L1\/L2\/L5, GLONASS G1\/G2\/G3, BeiDou B1\/B2\/B2a, Galileo E1\/E5a+b, NavIC L5, as well as L-band correction services and SBAS (WAAS, EGNOS, MSAS, GAGAN). It is particularly suited for triple-frequency RTK and PPP receivers.\u003c\/p\u003e\n\u003ch3\u003eTechnical performance and robustness\u003c\/h3\u003e\u003cp\u003eThe TW3972 stands out for its dual-stacked patch architecture with dual circular feed, precisely tuned. Signals from the two orthogonal feeds are combined and amplified by a wideband LNA, then narrowly filtered for each band before recombination. This design ensures superior multipath signal rejection, linear phase response, and very low phase center variation (PCV). The LNA preamplifier features very low noise (\u003c 2.5 dB typ.) and high gain (37 dB typ.), optimizing the signal-to-noise ratio. A robust pre-filter is integrated to attenuate interference from LTE and cellular bands, including Ligado.\u003c\/p\u003e","brand":"Pixel sur Mer","offers":[{"title":"Default Title","offer_id":53723748434260,"sku":"873-0037","price":387.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/tw3972-antenna.png?v=1778229791"},{"product_id":"b-g-antenne-gps-zg100-compas-10hz-nmea2000","title":"ZG100 GPS Antenna","description":"\u003cp\u003eThe B\u0026G ZG100 GPS antenna is a position receiver and heading sensor designed for B\u0026G instrument systems and chartplotters. It provides position, heading, speed over ground (SOG) and course over ground (COG) data at a 10 Hz refresh rate.\u003c\/p\u003e\n\n\u003ch3\u003eGPS and integrated sensors\u003c\/h3\u003e\n\u003cp\u003eThe ZG100 features a 32-channel GPS receiver, compatible with GPS, GLONASS and Galileo constellations, and supports SBAS augmentation systems (WAAS, EGNOS, MSAS) for 3-meter horizontal accuracy. The update rate is configurable up to 10 times per second (10 Hz). It includes an electronic compass and inertial sensors, providing magnetic heading with +\/- 3° accuracy, yaw rate (+\/- 3°), and roll and pitch (heel\/trim) with +\/- 1° accuracy at 30° tilt.\u003c\/p\u003e\n\n\u003ch3\u003ePosition in the B\u0026G range\u003c\/h3\u003e\n\u003cp\u003eThe ZG100 supplies heading data for chart stabilization in \"North-up\" mode or for overlaying radar images on cartography. For functions requiring higher heading accuracy, such as autopilot in heading mode or MARPA target tracking, B\u0026G recommends a compass like the \u003cstrong\u003eB\u0026G Precision-9\u003c\/strong\u003e. The ZG100 is suitable for instrumentation and general navigation; the Precision-9 is intended for autopilot and anticollision systems.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and connectivity\u003c\/h3\u003e\n\u003cp\u003eThe ZG100 antenna connects to the network via a standard NMEA 2000 Micro-C port. It is powered by the network (9-18 V DC) with power consumption below 100 mA at 12 V DC (less than 2 W). Its 90 mm diameter housing is waterproof to IPX7 standards for deck mounting. It transmits NMEA 2000 PGNs for position (129025), COG \u0026 SOG (129026), heading (127250), yaw rate (127251) and attitude (127257).\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723754692948,"sku":"000-11048-002","price":247.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e9c6fcb1-fe1b-4a73-a650-de00925b45d4.png?v=1771510777"},{"product_id":"raymarine-pack-pilote-automatique-ev-100-barre-franche","title":"EV-100 autopilot pack","description":"\u003cp\u003e Evolution Tiller Pilot with p70s control head, ACU-100, EV1 Sensor Core, EV1 Cabling kit \u0026amp; Tiller Drive\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723757183316,"sku":"T70153","price":1481.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_120d5c3a-ea3d-4c2b-a48d-5fde5a09cba9.jpg?v=1781695110"},{"product_id":"simrad-antenne-gps-gs25-nmea2000-10hz","title":"GS-25 GPS Antenna","description":"\u003cp\u003eThe Simrad GS-25 GPS antenna is a high-performance positioning receiver designed to deliver optimal accuracy on modern marine networks. With a 32-channel receiver and a 10 Hz refresh rate, it ensures rapid and smooth updates of position, speed over ground (SOG), and course over ground (COG), ideal for high-speed navigation. Unlike standard GPS antennas, the GS-25 integrates a heading sensor providing magnetic heading data with an accuracy of +\/- 3°, as well as yaw rate information (+\/- 3°) and attitude data (roll\/pitch to +\/- 1°).\u003c\/p\u003e\n\n\u003ch3\u003eNMEA 2000 Integration and Performance\u003c\/h3\u003e\n\u003cp\u003eDesigned for direct integration into an NMEA 2000 network via a Micro-C connector, this antenna stands out for its low power consumption (less than 2 W, or under 100 mA at 12 V DC) and a supply voltage tolerance of 9 to 18 V DC. With a cold acquisition time of 50 seconds and a 5-second satellite reacquisition time, it maintains a horizontal accuracy of 3 meters. While the GS-25 provides reliable heading data for radar overlay and chart orientation, Simrad recommends using a stabilized heading sensor, such as the Precision-9 compass, for more demanding applications like autopilot course-keeping in challenging conditions.\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design for Marine Environments\u003c\/h3\u003e\n\u003cp\u003eWith its compact 90 mm diameter and a weight of just 0.14 kg, the GS-25 antenna fits all mounting configurations, whether flush mount or standard pole mount. IPX7 certified, it withstands temporary immersion and operates reliably in extreme temperatures ranging from -20°C to +60°C, meeting the material requirements of the harshest marine environments.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723785265492,"sku":"000-11043-002","price":247.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_b5f31474-a654-4e74-9118-be0e515056bf.jpg?v=1776791004"},{"product_id":"raymarine-antenne-gps-10hz-raystar-150-rs150-seatalk-ng","title":"Raystar 150 (RS150) 10 Hz GPS Antenna (Sea talk ng)","description":"\u003cp\u003eThe Raymarine Raystar 150 (RS150) GPS antenna is a high-precision positioning receiver designed to provide reliable and fast navigation data to marine electronic systems. With a 10 Hz refresh rate, it updates position, heading, and speed ten times per second, ensuring smooth display on your multifunction display and optimal responsiveness from your autopilot.\u003c\/p\u003e\n\n\u003ch3\u003e10 Hz Positioning Performance\u003c\/h3\u003e\n\u003cp\u003eThe main feature of the Raystar 150 is its high update frequency. While standard antennas operate at 1 Hz, the RS150 offers ten times the performance. This advantage is critical for high-speed boats but also improves the accuracy of MARPA and AIS target tracking, as well as providing stable and responsive course-over-ground (COG) data to the autopilot, optimizing course-keeping and energy consumption.\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Integration with SeaTalk NG Network\u003c\/h3\u003e\n\u003cp\u003eConnected via the SeaTalk NG network, Raymarine’s proprietary standard compatible with NMEA 2000, the Raystar 150 is easy to install. A single cable supplies power and transfers data to all devices connected to the network. This antenna is the external sensor of choice for the Axiom display range when the internal GPS is obstructed by metal structures or when a more precise reference position is required. It replaces older generations of antennas like the RS130 and is a direct equivalent to Garmin’s GPS 19x or B\u0026G’s ZG100 sensors, with native integration into the Raymarine ecosystem.\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design for Marine Environments\u003c\/h3\u003e\n\u003cp\u003eCertified to IPX6, the Raystar 150 is built to withstand the harshest marine conditions. Its waterproof housing allows for deck or mast mounting, ensuring optimal satellite reception at all times. Its compact and discreet design integrates easily on any type of vessel.","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723788935508,"sku":"E70310","price":258.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_30aaadaf-fc7e-4e33-92db-24fd2b24d49c.jpg?v=1781448482"},{"product_id":"garmin-antenne-gps-24xd-hvs-nmea-0183","title":"24xd HVS NMEA0183 GPS Antenna","description":"\u003cp\u003eThe \u003cstrong\u003eGarmin GPS 24xd HVS NMEA 0183 antenna\u003c\/strong\u003e is a high-sensitivity GPS receiver (HVS) designed to provide accurate position and heading data to any NMEA 0183-compatible device. It represents a significant upgrade over older GPS antennas, offering a 10 Hz update rate for smooth tracking and near-instantaneous corrections, which is particularly beneficial for autopilots. Unlike the GPS 24xd NMEA 2000 model, this HVS version connects via a 9.14-meter cable to an NMEA 0183 network, making it an ideal choice for modernizing existing systems without replacing the entire onboard electronics. It stands out from competing antennas like the B\u0026G ZG100 by its ability to provide magnetic heading (HCHDG) without requiring a separate heading sensor, as it integrates a magnetic compass directly. With an IPX6\/IPX7 protection rating and an extended temperature range, it is built to withstand the most demanding marine environments.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and precision of the GPS 24xd HVS receiver\u003c\/h3\u003e\n\u003cp\u003eThe GPS 24xd HVS receiver is multi-GNSS, allowing it to capture signals from GPS, GLONASS, and Galileo constellations for increased positioning reliability, even in challenging conditions (urban valleys, wooded areas). Its high reception sensitivity (-165 dBm) ensures rapid satellite acquisition and signal lock retention in environments where standard antennas lose signal. The 10 Hz update rate (configurable to 5 Hz or 1 Hz) is a major asset for precision navigation, providing position and heading updates every 100 milliseconds. This results in more responsive display on the chartplotter and more precise autopilot control. Position accuracy is \u003c 2.5 meters CEP (50%) and \u003c 5 meters CEP (95%) with WAAS\/EGNOS correction.\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and installation on an NMEA 0183 network\u003c\/h3\u003e\n\u003cp\u003eThe GPS 24xd HVS antenna is designed for simplified integration on any NMEA 0183 network. The 9.14-meter cable is pre-wired with eight 22-gauge wires, including power connections (8-32 Vdc), serial data lines (Tx\/Rx A and B), and a Pulse Per Second (PPS) output for high-precision applications. The provided instructions detail wiring for unidirectional (transmit-only) or bidirectional (command reception) communication with a Garmin chartplotter or any other NMEA 0183 device. The antenna can be mounted on the surface, on a mast (standard 1-inch OD, 14 TPI thread), or under the deck (deck-mounted kit included with the white model, suitable only for fiberglass surfaces). Calibration of the integrated compass is required after installation and requires performing two slow circles at a speed of at least 6.4 km\/h.\u003c\/p\u003e\n\n\u003ch3\u003eDetailed technical specifications of the GPS 24xd HVS\u003c\/h3\u003e\n\u003cp\u003eThe antenna housing is made of high-strength plastic alloy, fully sealed for optimal waterproofing. Its dimensions are 96.1 mm in diameter and 49.5 mm in height, weighing 201 grams. Power input ranges from 8 to 32 Vdc, with a typical current draw of 150 mA at 12 Vdc. Operating temperature ranges from -30°C to 80°C for the white model and -30°C to 65°C for the black model. The antenna is certified CE, EAC, and FCC Part 15 Class B. It supports standard NMEA 0183 sentences (GPGGA, GPRMC, GPVTG, etc.) as well as proprietary Garmin sentences (PGRME, PGRMF, etc.) for advanced configuration via the Sensor Configuration Software (downloadable from Garmin’s website).","brand":"Garmin","offers":[{"title":"","offer_id":53723839234388,"sku":"010-02316-00","price":244.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_eb2c33d4-cfc7-4185-bcc3-2e957d5d897c.png?v=1779186369"},{"product_id":"garmin-antenne-gps-ga-38-glonass","title":"GA 38 GPS Antenna","description":"\u003cp\u003eThe Garmin \u003cstrong\u003eGA 38 GPS antenna\u003c\/strong\u003e is a rugged external antenna designed to enhance GPS and GLONASS signal reception on Garmin navigation equipment. Featuring a compact and waterproof IPX7 housing, it offers three flexible mounting options: surface, mast, or under-deck (fiberglass only), making it a versatile integration solution for vessels of all sizes.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and construction\u003c\/h3\u003e\n\u003cp\u003eThe antenna measures 91.6 × 49.5 mm and weighs 201 g. Its high-impact plastic alloy housing is fully sealed and IPX7 certified (immersion up to 1 m). It supports an operating temperature range of -30° to 80°C (white model) or -30° to 70°C (black model), ensuring reliable performance in extreme marine conditions. The safe distance from magnetic compasses is 114 mm.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and system integration\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGA 38\u003c\/strong\u003e connects via a standard BNC connector to any compatible Garmin equipment (multifunction chartplotters, VHF, AIS) with a port labeled ANTENNA or EXT GPS. The included 10 m BNC-BNC cable allows direct integration without additional adapters. This antenna provides a significant increase in reception sensitivity for installations where the multifunction display is positioned indoors or in structural shadow zones (metal, carbon).\u003c\/p\u003e\n\n\u003ch3\u003ePackage contents and installation\u003c\/h3\u003e\n\u003cp\u003eThe complete kit includes the GA 38 antenna, three mounting brackets (surface, mast, under-deck), mounting hardware, a 10 m antenna cable, and detailed installation instructions. Installation is accessible to experienced DIYers using standard tools (drill, 1.5 mm hex key, Phillips screwdriver). Garmin recommends a preliminary positioning test to optimize reception before final installation.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53723839430996,"sku":"010-12017-00","price":72.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_106a9fd6-5b24-4025-aaf7-60a848ddf210.png?v=1779186374"},{"product_id":"garmin-gps-24xd-nmea-2000-antenne-recepteur-blanc","title":"GPS receiver and 24xd NMEA 2000 antenna, white","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GPS 24xd NMEA 2000\u003c\/strong\u003e (white model) is a high-sensitivity GPS receiver combining multi-constellation GNSS positioning and an integrated magnetic compass in a compact 91.6 × 49.5 mm housing weighing 201 g. Designed to integrate directly into an existing NMEA 2000 network, it transmits up to 14 PGNs including fast position (129025), magnetic heading (127250), attitude data (127257), COG\/SOG (129026), and full GNSS data (129029). Its wide input voltage range of 9 to 32 Vdc and typical current draw of 150 mA at 12 Vdc make it a low-power sensor with an LEN of 3 on the backbone.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and protection rating\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGPS 24xd\u003c\/strong\u003e is certified IPX6 and IPX7 per IEC 60529, ensuring full protection against splashes and temporary immersion. The high-strength plastic alloy housing is fully gasketed. The compass safe distance is only 12.7 mm (0.5 in.), allowing installation near navigation instruments without magnetic interference risk. The white model offers an extended temperature range of -30° to +80°C, compared to -30° to +65°C for the black model (part number 010-02316-00), making it the preferred choice for exposed cockpit or mast installations. The 6 m NMEA 2000 drop cable and T-connector are included, along with an exclusive under-deck mounting kit for the white model, enabling installation beneath a fiberglass surface.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the Garmin lineup and vs. competitors\u003c\/h3\u003e\n\u003cp\u003e\n    Compared to the \u003cstrong\u003eGarmin GPS 19x NMEA 2000\u003c\/strong\u003e, the \u003cstrong\u003eGPS 24xd\u003c\/strong\u003e adds an integrated magnetic compass (PGN 127250), eliminating the need for a separate heading sensor. Against the \u003cstrong\u003eGarmin GPS 24xd NMEA 0183\u003c\/strong\u003e (010-02316-20), this NMEA 2000 model integrates natively into a digital backbone without a converter. Compared to competitors like the \u003cstrong\u003eSimrad HS70\u003c\/strong\u003e or \u003cstrong\u003eFuruno GP330B\u003c\/strong\u003e, the GPS 24xd stands out with its included under-deck mounting kit and superior temperature range on the white model. Compass calibration can be performed directly from a compatible Garmin chartplotter via the NMEA 2000 menu (Settings \u0026gt; Communications \u0026gt; NMEA 2000 Setup \u0026gt; Device List), or in basic mode for third-party networks. EAC, CE, and FCC certifications confirm compliance for use in Europe and North America.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and network integration: GPS 24xd NMEA 2000\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGPS 24xd\u003c\/strong\u003e mounts on a 1-inch OD threaded mast or boom (14 threads per inch), or under-deck on fiberglass hulls only (signal does not pass through metal hulls). The 6 m drop cable connects directly to the supplied T-connector on the existing NMEA 2000 backbone. Compass calibration requires two full circles at slow speed, followed by automatic heading alignment (Auto Heading Alignment) from a compatible Garmin MFD. In adverse magnetic environments, the magnetic heading data function can be disabled; the unit will continue transmitting GPS COG. Maximum input current is 200 mA at 12 Vdc, with an NMEA 2000 LEN of 3 at 9 Vdc.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":53723842052436,"sku":"010-02316-10","price":234.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c9aeae6c-a8f8-41a9-a440-746aadfb57dc.png?v=1779186370"},{"product_id":"icom-antenne-gps-patch-ux-240p","title":"UX-240P patch GPS antenna","description":"\u003cp\u003e\n    The \u003cstrong\u003eUX-240P patch GPS antenna\u003c\/strong\u003e from ICOM is an essential accessory for marine navigation systems requiring a reliable and precise GPS positioning source. Designed by ICOM, a global leader in radio communications known for its \"Made in Japan\" philosophy, this antenna aligns with the brand’s lineup of reliable and robust marine equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eICOM GPS Antenna: Integration and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eUX-240P\u003c\/strong\u003e is specifically designed to provide accurate positioning data to compatible ICOM devices. While models such as the IC-M94DE portable VHF radios integrate a GPS\/GLONASS receiver, or fixed VHF radios like the IC-M330GE and IC-M423GE feature built-in GPS, the \u003cstrong\u003eUX-240P\u003c\/strong\u003e antenna offers an optimized signal acquisition solution for installations where the main device is mounted below deck or in a location where GPS reception would be compromised. It is particularly relevant for systems such as the MA-510TR and MA-600TRBB AIS transponders, or the MR-1010RII radars, which rely on an external GPS input for optimal operation.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and Performance of the UX-240P\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eUX-240P patch GPS antenna\u003c\/strong\u003e serves as a key component to extend the navigation capabilities of ICOM devices. Its \"patch\" design indicates a compact, optimized construction for discreet installation while ensuring stable satellite reception. Compared to integrated GPS modules, an external antenna like the \u003cstrong\u003eUX-240P\u003c\/strong\u003e provides superior installation flexibility, ensuring the GPS receiver always has a clear view of the sky, even if the navigation device is located in the cabin or on a protected console. This approach enhances safety at sea, in line with ICOM’s core values of reliability and performance.\n\u003c\/p\u003e","brand":"ICOM","offers":[{"title":"Default Title","offer_id":55718280986964,"sku":"UX-240P","price":35.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_23f8c7e0-8bf9-4e50-9a91-cacf290c6f01.webp?v=1778020245"},{"product_id":"garmin-recepteur-antenne-gps-24xd-nmea-2000","title":"GPS receiver and antenna 24xd, for NMEA 2000 network, black","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GPS receiver and antenna 24xd\u003c\/strong\u003e is a high-precision navigation solution designed for seamless integration into NMEA 2000 networks. This high-sensitivity GPS antenna provides accurate position data and essential magnetic heading information for modern navigation systems, including radar overlays and sophisticated autopilots. It represents a significant evolution over traditional GPS antennas, offering improved signal acquisition and faster response times.\n\u003c\/p\u003e\n\n\u003ch3\u003eNMEA 2000 integration and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGPS 24xd\u003c\/strong\u003e integrates directly into your existing NMEA 2000 network using the included T-connector and 6-meter spur cable. This standardized connectivity ensures broad compatibility with a wide range of multifunction displays and instruments, whether Garmin or third-party. The 24xd's ability to provide magnetic heading data in addition to GPS position information sets it apart from basic GPS receivers. It enables heading calibration and automatic heading alignment, adjustable via a compatible Garmin chartplotter or through a basic calibration method for installations without a Garmin display.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatile mounting options and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin GPS 24xd\u003c\/strong\u003e is designed for flexible installation. It can be mounted on a flat surface, attached to a standard 1-inch outer diameter mast with 14 threads per inch (cable routed externally or through the mast), or even installed below deck on a fiberglass surface (below-deck mounting kit included only with white antenna models). These options allow for optimized signal reception by avoiding obstructions and electromagnetic interference. The antenna is built to withstand harsh marine environments, ensuring long-term operational reliability. The warning against installation near strong magnetic fields highlights the importance of optimal positioning for maximum performance, similar to the requirements for GPS\/compass antennas from competing brands such as Raymarine (Raystar 150) or Simrad (GS25).\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860314997076,"sku":"010-02316-20","price":252.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f29f0843-e5d1-4af0-98be-2ad97da5ab3a.png?v=1779191566"},{"product_id":"garmin-antenne-gps-glonass-ga38-marine","title":"GA™ 38 GPS\/GLONASS Antenna - VHF, AIS and Chartplotters","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GA™ 38\u003c\/strong\u003e antenna is an external GPS and GLONASS positioning solution designed to enhance navigation accuracy on compatible marine systems. It integrates seamlessly with a range of Garmin devices, including chartplotters, VHF radios, and AIS systems, providing reliable and fast location data. Unlike built-in antennas often limited by the main device’s location, the GA™ 38 allows optimized installation for maximum signal reception.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This antenna uses a standard BNC connector to connect to the dedicated \"ANTENNA\" or \"EXT GPS\" ports on compatible Garmin chartplotters. Its broad compatibility makes it an essential accessory for navigators looking to strengthen their existing GPS system or add positioning capability to devices lacking it or benefiting from improved signal reception. It serves as an external alternative to internal GPS modules, offering superior installation flexibility to ensure clear sky visibility.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatile Mounting Options\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin GA™ 38\u003c\/strong\u003e offers multiple mounting options to suit various vessel configurations. It can be surface-mounted using the included surface-mount bracket, or installed on a standard 1-inch threaded mast (not included) via the mast-mount adapter. For discreet installations or when aesthetics are critical, a below-deck mounting kit is also available (supplied with white antenna models only), allowing the antenna to operate effectively through non-metallic fiberglass surfaces. Its compact design (91.6 × 49.5 mm) and lightweight (201 g) facilitate integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design for Marine Environments\u003c\/h3\u003e\n\u003cp\u003e\n    Constructed from a high-strength, fully waterproof plastic alloy, the \u003cstrong\u003eGarmin GA™ 38\u003c\/strong\u003e is designed to withstand the harshest marine conditions. Its IEC 60529 IPX7 waterproof rating ensures protection against temporary immersion, guaranteeing reliable performance even in heavy spray or accidental submersion. It operates within a temperature range of -30° to 80°C (white model) and maintains a 114 mm safety distance from compasses, minimizing interference with other navigation equipment.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860624032084,"sku":"010-12017-30","price":80.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_0f84aee1-653b-4685-aa80-7675e3b295be.png?v=1779195153"},{"product_id":"garmin-antenne-gps-glonass-ga38-cortex-v1-m1","title":"GA™ 38 GPS and GLONASS antenna for Cortex® V1 and M1, white","description":"\u003cp\u003e\n    Designed for demanding marine environments, the Garmin GA™ 38 antenna (010-13305-00) is an external solution for improving GPS and GLONASS signal reception. It is specifically compatible with Cortex® V1 and M1 systems, as well as a range of Garmin equipment including VHF radios, AIS transceivers, and compatible chartplotters. This antenna addresses reception limitations of built-in antennas when the main device is installed in a sub-optimal location or below deck.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Robustness of the GA™ 38\u003c\/h3\u003e\n\u003cp\u003e\n    The GA™ 38 antenna supports both GPS and GLONASS constellations, ensuring optimal signal acquisition and positioning accuracy. Its compact and watertight housing is made from high-impact plastic alloy with a fully sealed joint. It has an IPX7 waterproof rating, guaranteeing resistance to immersion up to 1 meter for 30 minutes. The white model supports an operating temperature range from -30°C to 80°C, providing reliability in various weather conditions. With dimensions of 91.6 mm in diameter and 49.5 mm in height, and a weight of 201 g, it has a low profile that facilitates integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatile Installation Options\u003c\/h3\u003e\n\u003cp\u003e\n    The GA™ 38 offers flexible installation methods. It can be mounted on a flat surface, on a mast (standard 1-inch outer diameter, 14 threads per inch), or below deck for fiberglass surfaces (below-deck mounting kit included only with the white model). The supplied 10-meter BNC-SMA antenna cable allows strategic positioning for an unobstructed view of the sky, avoiding interference from the boat's superstructure, radomes, or mast. It should be kept away from electromagnetic interference sources such as engines or VHF antennas (1-meter safety distance) and ferrous metal objects. A 114 mm safety distance from a compass is also required. For Cortex V1 and M1 systems, this external antenna ensures stable and precise positioning data reception, essential for navigation and safety at sea, complementing the capabilities of integrated Garmin equipment.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860670955860,"sku":"010-13305-00","price":86.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_2a2cbba8-3bf8-4a00-9833-d643bd9812b1.jpg?v=1779195983"},{"product_id":"garmin-antenne-gps-glonass-ga38-cortex-marine","title":"GA™ 38 GPS and GLONASS antenna for Cortex® V1 and M1, black","description":"\u003cp\u003e\n    Designed for optimal positioning signal reception, the Garmin GA™ 38 black GPS and GLONASS antenna is an external solution that improves navigation accuracy and reliability onboard. Specifically intended for Cortex® V1 and M1 systems, as well as various Garmin chartplotters, VHF radios, and compatible AIS units, it represents an upgrade for devices with obstructed internal antennas or those requiring superior GNSS performance.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The GA 38 supports dual-constellation GPS and GLONASS systems, ensuring faster position acquisition and better accuracy even in challenging conditions. With compact dimensions of 91.6 mm in diameter and 49.5 mm in height, and a weight of 128 g for the black model, it integrates discreetly. Its high-impact plastic alloy housing, fully waterproof to IEC 60529 IPX7 standards, guarantees resistance to demanding marine environments, with an operating temperature range of -30°C to 70°C. It comes with a 10-meter BNC-SMA cable, allowing flexible installation.\n\u003c\/p\u003e\n\u003ch3\u003eVersatile Installation Options\u003c\/h3\u003e\n\u003cp\u003e\n    The Garmin GA 38 antenna offers multiple mounting options to suit various boat configurations. It can be installed on a flat surface using the included surface-mount bracket, or attached to a standard 1-inch outer diameter mast with a 14 threads-per-inch thread pitch using the provided mast-mount bracket. These options allow positioning the antenna for clear sky visibility, avoiding obstructions from superstructure, radome, or mast, and minimizing electromagnetic interference from the engine, radar, or VHF radios. Unlike the white model, the under-deck mounting bracket is not included with the black version.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860674167124,"sku":"010-13305-20","price":111.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_8d25db89-6ebc-438b-8095-abcbebd77144.png?v=1779196002"},{"product_id":"garmin-gps-19x-hvs-nmea-0183-recepteur-antenne","title":"GPS 19x HVS (NMEA 0183)","description":"\u003cp\u003e\n    Designed for marine navigation, Garmin’s \u003cstrong\u003eGPS 19x HVS\u003c\/strong\u003e is a high-sensitivity antenna\/receiver compatible with NMEA 0183. It provides position, speed, and time data with 3-meter accuracy thanks to WAAS capability and multi-GNSS support including GPS, GLONASS, Galileo, and QZSS (requiring potential software update). This sensor is intended for integration with existing marine instruments, autopilots, and multifunction displays (MFD) communicating via the NMEA 0183 standard.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGPS 19x HVS\u003c\/strong\u003e stands out with its data update rate of up to 10 Hz, configurable at 1 Hz or 5 Hz, delivering smooth position and heading representation on displays. This responsiveness is particularly beneficial for applications requiring dynamic accuracy, such as track following or low-speed drift (below 1 mph), where it eliminates the \"position jump\" phenomenon often seen with less capable units. Unlike the GPS 19x NMEA 2000, this version is specifically designed for NMEA 0183 network architectures, ensuring compatibility with older equipment or specific installations.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and installation\u003c\/h3\u003e\n\u003cp\u003e\n    With compact dimensions of 91.6 mm in diameter and 49.5 mm in height, weighing 201 g, the \u003cstrong\u003eGPS 19x HVS\u003c\/strong\u003e is easy to install. It operates on a voltage range of 8 to 33 Vdc and consumes 40 mA at 12 Vdc. Its high-strength plastic alloy housing, fully watertight and rated IPX7, ensures durability suited to marine environments, handling temperatures from -30°C to 80°C. The included 9.14-meter cable simplifies wiring. Installation flexibility is a key feature, allowing mounting on mast, surface, or under fiberglass deck, with a 150 mm safe distance from the compass. The flash-based program enables software updates via download.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55967477629268,"sku":"010-01010-00","price":133.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_f9538806-67ca-4124-af3a-d9bcf60741ea.jpg?v=1779970182"},{"product_id":"garmin-support-antenne-gps-montage-plat-pont","title":"GPS antenna mount for flush deck mounting","description":"\u003cp\u003e\n    The Garmin GPS antenna mount for flush deck installation (part number 010-11083-00) is designed for discreet and secure integration of compatible Garmin GPS antennas. Unlike a rail or mast mount, this kit allows flush installation on any flat surface, providing a low-profile and clean finish on board. This type of mounting is particularly suitable for boats where aesthetics and minimizing protruding elements are priorities.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This flush-mount kit is specifically developed for Garmin GPS antennas, ensuring mechanical compatibility and stable mounting. It differs from universal solutions with its dedicated design that guarantees precise fitment. Installation is simplified by the included hardware, detailed instructions, and a cutting template, reducing time and complexity compared to ad-hoc solutions. Its white color blends with most marine equipment.\n\u003c\/p\u003e\n\u003ch3\u003ePosition in the Garmin range\u003c\/h3\u003e\n\u003cp\u003e\n    As an essential accessory, this mount complements Garmin’s GPS antenna range by offering an alternative mounting option to traditional fastening systems. While compatible Garmin GPS antennas, such as the GPS 17x, feature high-sensitivity receivers and marine-grade robustness, this mount focuses on the physical installation method of these devices. It ensures that the antenna, whether a dedicated GPS sensor or a combined unit, is securely anchored to the surface, optimizing its ability to maintain accurate satellite tracking by eliminating potential mounting vibrations.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008753054036,"sku":"010-11083-00","price":11.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_c322b873-c824-47dd-bff7-0a245a54e93c.jpg?v=1780434901"},{"product_id":"garmin-antenne-gps-iridium-externe-cable-adaptateur","title":"External GPS\/Iridium antenna with adapter cable","description":"\u003cp\u003e\n    The Garmin external GPS\/Iridium antenna with adapter cable (part number 010-12881-06) is designed to optimize satellite reception for compatible Garmin devices. Its discreet, water-resistant housing ensures durability in various marine and land environments. It provides increased installation flexibility and improved signal strength compared to internal antennas.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This antenna enables compatible devices to use the Iridium satellite network for global coverage, facilitating two-way communications, SOS alerts, and weather forecasts even without cellular network access. It includes a 1.5-meter antenna cable and an additional ~0.2-meter adapter cable. The magnetic mounting offers versatile placement options on vehicles or buildings.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatible devices\u003c\/h3\u003e\n\u003cp\u003e\n    The Garmin external GPS\/Iridium antenna 010-12881-06 is specifically compatible with the Garmin Montana 700i, 710i, 750i, and 760i, enhancing their navigation and satellite communication capabilities.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56009446588756,"sku":"010-12881-06","price":83.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_15987cd4-65cc-4eba-96cd-732764faf21a.jpg?v=1780439291"},{"product_id":"lowrance-point-1-antenne-gps-nmea-2000","title":"Lowrance POINT-1 GPS Antenna","description":"\u003cp\u003e\n    The Lowrance Point-1 GPS antenna is a compact and high-performance positioning and heading solution designed for integration into NMEA 2000 networks. This sensor combines a 32-channel GPS\/GLONASS receiver with an integrated electronic compass, providing essential position and heading data for navigation and fishfinder systems.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning accuracy and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Point-1 delivers fast position updates up to 10 Hz, ensuring a precise and smooth track on your chartplotter, even at high speeds. Its horizontal accuracy is 3 meters, which is sufficient for most marine applications. Unlike basic GPS sensors, the Point-1 also includes an electronic compass, providing heading data with an accuracy of +\/- 3° and a turn rate accuracy of +\/- 3°. These specifications set it apart from simple GPS antennas, making it a versatile sensor for Lowrance, Simrad, and B\u0026G systems compatible with NMEA 2000.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    With compact dimensions of 90 mm in diameter and 30 mm in height, weighing only 0.14 kg, the \u003cstrong\u003eLowrance Point-1\u003c\/strong\u003e antenna is easily installed via a flush mount or standard mast installation. It connects directly to the NMEA 2000® network via a Micro C connector, simplifying installation and interconnection with other devices. Its power supply ranges from 5 V DC to 18 V DC, with low power consumption of less than 2 W (\u003c 100 mA at 12 V DC). Designed for the marine environment, it operates between -25°C and +60°C and features an IPX67 rating (splash-proof), ensuring reliability at sea. While its integrated compass provides acceptable heading performance for most uses, demanding applications requiring superior stabilized heading accuracy—such as radar overlays or sophisticated autopilots—may benefit from a dedicated sensor like the B\u0026G Precision-9, which offers more robust performance in these scenarios. The Point-1 remains a cost-effective and highly efficient option for the majority of recreational sailors and anglers.\n\u003c\/p\u003e\n\n\u003ch3\u003eSupported NMEA 2000 protocols\u003c\/h3\u003e\n\u003cp\u003e\n    The Point-1 transmits a full range of essential NMEA 2000 PGNs, including system time data (126992), vessel heading (127250), rate of turn (127251), attitude (127257), magnetic variation (127258), GNS DOP (129539), satellites in view (129540), rapid update position (129825), COG \u0026 SOG (129826), and general position data (129829). This extended compatibility ensures seamless integration with a wide variety of multifunction displays and navigation systems.\n\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":56047611806036,"sku":"000-11047-002","price":251.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/web-lowrance-antenne-gps-point-1_000-11047-002-01.webp?v=1780869721"},{"product_id":"raymarine-antenne-gps-ga-200-axiom-pro-xl-ais","title":"GA 200 GPS Antenna for AXIOM Pro, AXIOM XL \u0026 AIS 700\/4000\/5000","description":"\u003cp\u003e\n    The Raymarine GA 200 GPS antenna, part number A80589, is designed to provide satellite positioning data to compatible Raymarine navigation systems. This equipment is essential for accurate navigation and the functionality of Automatic Identification Systems (AIS) onboard.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The GA 200 is specifically developed to integrate with Raymarine AXIOM Pro and AXIOM XL multifunction displays. It is also compatible with Raymarine AIS transponders 700, 4000, and 5000, ensuring a reliable source of GNSS (GPS) data for these critical devices. The integration of this antenna contributes to the overall performance of the navigation network, enabling constant and precise position acquisition.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and performance\u003c\/h3\u003e\n\u003cp\u003e\n    To optimize GNSS signal reception, the location of the GA 200 antenna must be carefully selected, taking into account the specific requirements mentioned in Raymarine’s installation guides. Proper installation, away from electromagnetic interference and with a clear view of the sky, is necessary to ensure the accuracy of the positioning data provided to connected equipment. EMC installation guidelines and safe distances for compasses are important, highlighting the need for correct positioning.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076533956948,"sku":"A80589","price":114.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/A80589-official-02.png?v=1781775561"},{"product_id":"maretron-antenne-recepteur-gps-nmea2000","title":"NMEA 2000 - GPS Antenna\/Receiver","description":"\u003cp\u003e\n    Designed to provide a reliable GPS data source to the onboard network, the \u003cstrong\u003eMaretron GPS200-01 NMEA 2000 GPS antenna\/receiver\u003c\/strong\u003e is an essential component for marine navigation systems. This receiver is NMEA 2000 certified, ensuring seamless integration and communication within your marine electronics infrastructure.\n\u003c\/p\u003e\n\n\u003ch3\u003eNMEA 2000 Certification and Safety Criteria\u003c\/h3\u003e\n\u003cp\u003e\n    The GPS200-01 has been tested and verified to meet critical safety criteria and to correctly implement NMEA 2000 network management and messaging. Certification involves a suite of over 100 tests, including priority messaging to ensure the transmission of high-importance messages, automatic addressing to allow connection and disconnection of products without network interference, understanding of product information on the network, EMI and noise immunity requirements, and electrical isolation to prevent network disruption. This rigor ensures the device operates in harmony and safely with other NMEA 2000 certified equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompliance with International Maritime Standards\u003c\/h3\u003e\n\u003cp\u003e\n    In addition to its NMEA 2000 certification, the GPS200-01 is also tested in accordance with IEC 60945 for marine navigation and radiocommunication equipment and systems. This compliance attests to its robustness and reliability in the marine environment, providing peace of mind regarding its performance and longevity onboard.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":56076865143124,"sku":"GPS200-01","price":244.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/GPS200-01-brochure-01.jpg?v=1781133647"},{"product_id":"furuno-gpa-022s-antenne-dgps-glonass-gp170","title":"GPA-022S FURUNO DGPS\/GLONASS antenna for GP170","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO GPA-022S\u003c\/strong\u003e antenna is designed for DGPS and GLONASS reception, providing a positioning solution for the FURUNO GP-170 navigation system. It ensures improved position stability and accuracy for various marine vessels. Integrated with the GP-170 display, it supports GPS+GLONASS functionality (Multi GNSS).\n\u003c\/p\u003e\n\u003ch3\u003eAccuracy and Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    Weighing 0.47 kg, the GPA-022S antenna features IP56 environmental protection, making it suitable for marine environments. It operates within a temperature range of -25°C to +70°C. Its enhanced noise rejection capabilities contribute to anti-jamming performance and high tolerance to multipath interference, ensuring a clear and reliable signal.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration with GP-170 System\u003c\/h3\u003e\n\u003cp\u003e\n    Paired with the FURUNO GP-170 system, this antenna delivers stable and accurate positioning suitable for ocean-going vessels, large yachts, ferries, and commercial ships. The system complies with IMO performance standards and IEC test standards, including MSC.112 (73) for GPS and MSC.113 for GLONASS, as well as IEC 61108-1. The GP-170 uses augmentation systems such as SBAS (Satellite-Based Augmentation System), DGNSS (Differential Global Navigation Satellite System), and SLAS (Sub-meter Level Augmentation Service) to enhance positioning accuracy.\n\u003c\/p\u003e\n\u003ch3\u003eGP-170 System Features\u003c\/h3\u003e\n\u003cp\u003e\n    The GP-170 system provides a 10 Hz position refresh rate, updating the position every 0.1 seconds for stable vessel tracking. The 5.7-inch color LCD screen (640 x 480 pixels resolution) displays clear data through various display modes: Chartplotter, Heading, Highway, Data, and Integrity. A front-panel USB port facilitates route data export and import. A LAN interface is available for network integration (IEC 61162-450). The system includes 4 NMEA 0183 ports and 3 serial ports (2 Input\/Output, 1 Output) compliant with IEC 61162-1. Route management is enhanced with memory capacity for 1,000 track points, 2,000 waypoints, and 100 routes (each up to 1,000 waypoints). The system operates on 12-24 VDC power and is compatible with Bridge Alert Management (BAM).\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084162806100,"sku":"00003783900","price":422.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-gpa-022s-antenne-dgpsglonass-pour-gp170_00003783900-1.jpg?v=1781193400"},{"product_id":"furuno-if-2550-iec1-interface-polyvalente-programmable-nmea","title":"IF-2550-IEC1 Multipurpose and Programmable Interface (replaces MD550 and more)","description":"\u003cp\u003e\n    The multipurpose and programmable \u003cstrong\u003eFURUNO IF-2550-IEC1\u003c\/strong\u003e interface is designed to optimize the integration of marine electronic equipment. It provides a unified solution for managing NMEA data, replacing several previous units such as the MD-550, IF-1001, IF-2300, IF-2500, and IF-2503, and consolidating their features into a single module.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and NMEA Data Management\u003c\/h3\u003e\n\u003cp\u003e\n    With its \u003cstrong\u003e3 NMEA0183 inputs\u003c\/strong\u003e, the IF-2550-IEC1 allows combining data from various sources, ensuring flexible integration of systems. Its \u003cstrong\u003e8 NMEA0183 outputs\u003c\/strong\u003e can distribute data from one or two sources to multiple devices, ensuring efficient information dissemination. This interface supports NMEA0183 versions 1.5, 2.0, 3.x, and 4.x, offering extended compatibility with modern and existing equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    The IF-2550-IEC1 operates at baud rates of \u003cstrong\u003e4800 and 38400 bps\u003c\/strong\u003e, enabling fast data transfer between devices. Its compact plastic design ensures direct integration aboard. The unit includes a specialized \"Ferry\" mode to reverse heading data by 180 degrees, a useful feature for double-ended ferries. Its programmability via DIP switches allows customized configuration of functions, enabling precise adaptation to the specific needs of each installation. Power is supplied via a \u003cstrong\u003e12-24V DC\u003c\/strong\u003e input.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084163559764,"sku":"00003783100","price":1053.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-00003783100-if-2550-iec1-interface-programmable.jpg?v=1782001829"},{"product_id":"furuno-kit-dgps-op20-56-antenne-gp021s-gp170","title":"DGPS kit OP20-56 with GP021S antenna for GP170","description":"\u003cp\u003e\n    Designed for professional navigation, the \u003cstrong\u003eFURUNO DGPS kit OP20-56 with GPA021S antenna\u003c\/strong\u003e is a precision augmentation solution for the GP-170 GNSS navigator. This kit enables the GP-170 to operate in DGNSS (Differential Global Navigation Satellite System) mode, providing enhanced stability and reliability for merchant ships, large yachts, ferries, and commercial vessels.\n\u003c\/p\u003e\n\n\u003ch3\u003eGNSS Precision and Reception\u003c\/h3\u003e\n\u003cp\u003e\n    The GP-170 system, enhanced by this kit, integrates a new GPS circuit and the GPA-021S antenna, ensuring improved positioning accuracy. It is compatible with GPS, GLONASS, DGNSS, SBAS (Satellite-Based Augmentation System), and SLAS (Sub-meter Level Augmentation Service) systems. The GPA-021S antenna is designed for better noise rejection and high tolerance to multipath fading, enabling position updates at 10 Hz (every 0.1 seconds) for stable vessel tracking. The GPA-021S antenna weighs approximately 1 kg and is typically supplied with a 10-meter cable.\n\u003c\/p\u003e\n\n\u003ch3\u003eGP-170 Display and User Interface\u003c\/h3\u003e\n\u003cp\u003e\n    The GP-170 features a 5.7-inch color LCD screen with a VGA resolution of 640 x 480 pixels and a brightness of 700 cd\/m². It offers seven different display modes, including two customizable ones, for clear visualization of navigation data. The GP-170’s memory capacity allows storage of 10,000 waypoints, 100 routes, and 3,000 tracks. It includes a front USB port for routing data and parameter import\/export, as well as an IEC 61162-450 compliant LAN interface for efficient network integration within a bridge system.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    The GP-170 provides extensive connectivity with four NMEA0183 ports, one Ethernet port, and one USB port. It supports Bridge Alert Management (BAM) alerts per IMO MSC.302 (87) and complies with IMO performance standards, including IACS UR E27, IMO MSC.112 (73) for GPS, MSC.113 (73) for GLONASS, MSC.114 (73) and IEC 61108-4 for DGNSS. The system supports dual configuration for backup needs, enabling navigation data sharing between units. It serves as a position sensor for other navigation and communication equipment such as radar, AIS, ECDIS, autopilot, and fishfinder.","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084175389012,"sku":"00003925100","price":744.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-kit-dgps-op20-56-avec-antenne-gp021s-pour-gp170_00003925100-1.jpg?v=1781193888"},{"product_id":"furuno-cable-20m-tncp-tncp-3dhr-antenne-nx9he","title":"20m TNCP-TNCP-3DHR cable for NX9HE antenna","description":"\u003cp\u003e\n    This \u003cstrong\u003eFURUNO TNCP-TNCP-3DHR\u003c\/strong\u003e coaxial cable, 20 meters long, is designed for connecting the NX-9HE antenna to the NX-900 NAVTEX receiver. It ensures dedicated and stable signal transmission, essential for navigation data. The TNCP-TNCP specification indicates TNC male connectors at both ends.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Marine Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    With a length of 20 meters, this cable is suitable for installations requiring extended range between the antenna and the receiver. The 3DHR cable type is designed to provide consistent performance in demanding marine environments, ensuring the integrity of the NAVTEX signal. While not explicitly specified for this model, the impedance of these Furuno coaxial cables is typically 50 Ohms, which is standard for marine antenna applications.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration with the FURUNO NX-900 System\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003e00124048000\u003c\/strong\u003e cable is a dedicated component for the FURUNO NX-900 NAVTEX receiver system, ensuring compatibility and optimal performance with the NX-9HE antenna. It is an integral part of the communication chain for receiving maritime safety messages.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084186562900,"sku":"00124048000","price":220.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-20m-de-cable-tncp-tncp-3dhr-pour-antenne-nx9he_00124048000-1.jpg?v=1781194189"},{"product_id":"furuno-navnet-tztxl-15-6-pouces-ecran-multifunction-sondeur-gps","title":"FURUNO NavNet TZTXL 15.6\" IPS touchscreen multifunction display with chartplotter, GPS, and depth sounder","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO NavNet TZTXL 15.6\" IPS\u003c\/strong\u003e touchscreen multifunction display is an advanced marine navigation solution integrating chartplotter, GPS, and depth sounder capabilities. Featuring a 15.6\" Wide TFT IPS LCD screen, it delivers Full HD resolution at 1920×1080 pixels and a brightness of 900 cd\/m², ensuring clear visibility from various angles. Its hexacore processor guarantees fast responsiveness and smooth operation.\n\u003c\/p\u003e\n\n\u003ch3\u003eSonar Integration and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNavNet TZTXL 15.6\"\u003c\/strong\u003e integrates a TruEcho CHIRP™ and CW dual-channel 1kW depth sounder, along with a Side-Scan CHIRP function operating at 230kHz or 455kHz. This capability enables detailed underwater detection. For advanced fishing requirements, it is compatible with TruEcho CHIRP™ DFF3-UHD network depth sounders rated at 2kW\/3kW and can be paired with a BT-5 Booster to achieve 5kW or 10kW power. The system also supports the DFF3D multibeam depth sounder for 3D views of underwater structures up to 300 meters deep and a 200-meter side range, including personal bathymetry generation (PBG).\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Navigation and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This system uses TZ MAPS charts, providing detailed navigation and fishing data with customizable terrain shading and satellite imagery. The BathyVision feature offers bathymetric data with configurable contour lines down to 3-inch resolution. The AI Routing system intelligently plans routes considering draft and chart data. NMEA2000 connectivity, built-in Wi-Fi, and Ethernet networking facilitate integration with other marine equipment. The unit is also compatible with various radars (Open Array NXT Solid-State Doppler, X-Class Magnetron, 24\" and 19\" Radome) for safety functions such as Risk Visualizer and AI Avoidance Route. The user interface is fully touchscreen, with swipe gestures and one-touch menu options. The \u003cstrong\u003eNavNet TZTXL 15.6\"\u003c\/strong\u003e is rated IP56 for water resistance and operates on 12\/24 VDC power.","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089222250836,"sku":"IMD041110AA","price":5132.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-ecran-multifonction-tactile-navnet-tztxl-156-ips-lecteur-de-carte-avec-gps-sondeur-doub_imd04-1.jpg?v=1781254717"},{"product_id":"furuno-tzt16f-ecran-multifonction-gps-sondeur-chirp-wifi","title":"TZT16F — 15.6\" NavNet TZtouch3 multifunction touchscreen display with GPS, CHIRP fishfinder and integrated Wi-Fi","description":"\u003cp\u003eThe \u003cstrong\u003eFURUNO TZT16F NavNet TZtouch3\u003c\/strong\u003e is a 15.6\" multifunction touchscreen display designed for marine navigation. It integrates a GPS receiver, a CHIRP fishfinder, and Wi-Fi connectivity, providing a complete solution for onboard information management. This MFD features a fully glass-covered display and a quad-core processor for smooth operation.\u003c\/p\u003e\n\n\u003ch3\u003eDisplay and performance\u003c\/h3\u003e\n\u003cp\u003eThe TZT16F has a 15.6\" IPS multi-touch TFT color display with Full HD resolution of 1920 x 1080 pixels. A typical brightness of 1000 cd\/m² ensures good visibility even in bright sunlight. The quad-core processor delivers fast responsiveness when using functions and displaying charts.\u003c\/p\u003e\n\n\u003ch3\u003eNavigation and integrated fishfinder\u003c\/h3\u003e\n\u003cp\u003eEquipped with an integrated 72-channel GNSS (GPS\/WAAS) receiver, the TZT16F offers 10 m (GNSS) and 3 m (WAAS) accuracy. The integrated dual-channel TruEcho CHIRP™ fishfinder operates at CW frequencies of 50\/200 kHz and CHIRP frequencies from 40 to 225 kHz. Its power can be extended up to 2-3 kW with an optional Deep Impact DI-FFAMP amplifier, allowing connection to 5-10 kW transducers with a BT-5 (the DI-FFAMP’s actual output power is 3 kW). Display modes include ACCU-FISHTM, A-scope, ResBoostTM, bottom composition estimation, and temperature graph.\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and advanced features\u003c\/h3\u003e\n\u003cp\u003eThe TZT16F offers extensive connectivity with IEEE802.11b\/g\/n Wi-Fi, two 100Base-TX Ethernet ports, an NMEA2000 port, and an NMEA0183 output. It also includes two USB 2.0 ports, an HDMI output (1080p FHD) and an HDMI input, two composite video inputs (NTSC\/PAL), and a micro-SDXC slot. The intuitive user interface uses swipe gestures and single-touch menu options. It supports MapMedia mm3d charts (raster, vector, satellite photo, 3D data), C-MAP, and Datacore by Navionics, with features like Satellite PhotoFusion™ and 3D navigation. The system is compatible with Furuno NXT and X-Class radars and integrates data synchronization via TZ Cloud, PIN code locking, and tracking of 100 AIS targets.","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089226674516,"sku":"IMD035000AB","price":5499.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-tzt16f-ecran-multifonction-tactile-navnettztouch3-156-gps-sondeur-chirp-et-wifi-integres_imd0-1.png?v=1781254765"},{"product_id":"furuno-gp170-gp21s-navigateur-dgps-antenne-gpa021s-marine","title":"GP170\/GP21S — GP170 with GPA021S DGPS antenna\/15m cable, 12-24VDC","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO GP170\/GP21S\u003c\/strong\u003e is a DGPS navigator designed for reliable navigation across a wide range of vessels, including ocean-going ships, large yachts, ferries, and commercial vessels. It serves as a position sensor for various navigation and communication equipment such as radars, AIS, ECDIS, autopilots, and depth sounders.\n\u003c\/p\u003e\n\u003ch3\u003eDisplay and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with a 5.7-inch color LCD screen, the GP170 provides high clarity for displaying information. It ensures a fast position refresh rate of 10 Hz, updating the position every 0.1 seconds for stable vessel tracking. Accuracy is enhanced by the use of SBAS (WAAS\/EGNOS\/MSAS), DGNSS, and SLAS augmentation systems. The system is powered by 12-24V DC.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The GP170 features 4 NMEA0183 ports, an Ethernet port, and a front USB port, facilitating integration into existing bridge systems. The LAN interface is compliant with IEC 61162-450, enabling efficient network integration. The front USB port is designed for exporting and importing routing data, menu parameters, and user configurations. It offers a memory capacity of 10,000 waypoints, 100 routes, and 3,000 tracks.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced Features and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    This DGPS navigator complies with IMO performance standards and IEC test standards, including MSC.112 (73), MSC.114 (73), MSC.115 (73), IEC 61108-1, IEC 61108-2, IEC 61108-4, and IEC 62923-1\/-2. It integrates an enhanced GPS chip and antenna for improved positioning stability and accuracy, with advanced noise rejection capabilities, anti-jamming functions, and high tolerance to multi-path attenuation. The GP170 is \"Bridge Alert Management (BAM) Ready\", meeting IMO MSC.302 (87) specific alert and interconnection requirements. It supports dual configuration for redundancy and information sharing. Seven display modes are available, including two customizable ones, with an Integrity mode displaying a detailed Skyplot of visible satellites, GNSS\/SBAS signal reception status, and beacon station information. Route planning and management functions are comprehensive, allowing simplified route creation and compatibility with external PCs (GPX format). Operation is simplified with a directional pad and numeric keypad. The display unit has an IPX6 protection rating, and the weight is 0.39 kg for bracket mounting and 0.36 kg for flush mounting.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089271730516,"sku":"IMD03226015","price":2983.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-gp170gp21s-gp170-avec-antenne-dgps-gpa021scable-15m-12-24vcc_imd03226015-1.png?v=1781255266"},{"product_id":"furuno-gp340-nmea2000-antenne-gps-gnss-waas","title":"GP340\/NMEA2000 — Active GPS Antenna WAAS, EGNOS, MSAS and GAGAN NMEA2000 12 channels - IP56 - 6m cable - 12","description":"\u003cp\u003e\n    Designed for precise and reliable navigation, the \u003cstrong\u003eFURUNO GP340\/NMEA2000\u003c\/strong\u003e active antenna integrates a 75-channel GNSS core. This receiver supports multiple satellite constellations, including GPS (L1\/L5), GLONASS (L1), Galileo (E1\/E5), QZSS (L1\/L5) and BeiDou (B1\/B2). For enhanced accuracy, it is compatible with SBAS augmentation systems such as WAAS, EGNOS, MSAS and GAGAN.\n\u003c\/p\u003e\n\u003ch3\u003eAccuracy and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO GP340\/NMEA2000\u003c\/strong\u003e delivers positioning accuracy of less than 3 meters and a fast 10 Hz update rate, ensuring rapid and accurate updates for connected systems. It features standard NMEA2000 connectivity, with an optional NMEA0183 interface via an additional cable. Power requirement is 12-24VDC and the unit is rated IP56, making it suitable for demanding marine environments. A 6-meter NMEA2000 cable is included to simplify installation.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    Thanks to its multi-constellation support, this GPS antenna ensures high redundancy and accuracy, enabling fast and reliable position corrections even in challenging conditions or near obstacles. The \u003cstrong\u003eGP340\/NMEA2000\u003c\/strong\u003e integrates with Furuno NavNet series (TZtouch, TZtouch2, TZtouch3, TZtouchXL) and other navigation systems requiring high-precision GPS data. It automatically selects the best available satellite combination. Its compact and robust design ensures long-term durability, with a GPS rollover date set for January 1, 2041. Note that the GP340 does not provide magnetic variation data.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089280610644,"sku":"IMDGP340","price":367.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-gp340nmea2000-antenne-active-gps-waas-egnos-msas-et-gagan-nmea2000-12-canaux-ip56-6m-de-cable-1.png?v=1781255337"},{"product_id":"furuno-rogps6-antenne-gps-nmea0183-marine","title":"ROGPS6 — Active Antenna \/ GPS \/ NMEA0183 - 4800 Baud - 72 Channels - GPS, GLONASS, Beidou, SBAS - IP","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO ROGPS6\u003c\/strong\u003e active antenna is designed for professional marine navigation, providing a precise and reliable positioning data source. Integrating a GNSS receiver and an antenna in a compact housing, it delivers high sensitivity and minimal acquisition time for satellite signals.\n\u003c\/p\u003e\n\n\u003ch3\u003eMulti-GNSS Capabilities and NMEA0183 Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eROGPS6\u003c\/strong\u003e supports GPS, GLONASS, Beidou, and SBAS satellite navigation systems, including a WAAS receiver, for global coverage and improved accuracy. It features 72 channels and communicates via a 4800-baud NMEA0183 interface, ensuring easy integration with a wide range of existing marine electronic equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Flexible Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With a 10 to 35 V DC power supply and IPX7 waterproofing, the \u003cstrong\u003eFURUNO ROGPS6\u003c\/strong\u003e is suited for demanding marine environments. Its compact size and included 15-meter cable allow flexible installation on various types of vessels, ensuring optimal GPS signal reception. This antenna integrates a next-generation GPS module for consistent performance.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089281790292,"sku":"AV-UXAGSG00RO","price":161.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-rogps6-antenne-active-gps-nmea0183-4800-bauds-72-canaux-gps-glonass-beidou-sbas-ip_av-uxagsg0-1.jpg?v=1781255358"},{"product_id":"furuno-sc33-compas-satellitaire-nmea2000","title":"SC33 — Satellite Compass NMEA2000 Awarded at Prestigious NMEA AWARDS 2019. Heading accuracy very","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO SC33\u003c\/strong\u003e is a satellite compass NMEA2000 awarded at the NMEA AWARDS 2019 in the « NMEA 2000 Sensor » category. It is designed to provide accurate attitude data to various marine navigation equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccuracy and performance\u003c\/h3\u003e\n\u003cp\u003e\n    This satellite compass delivers a heading accuracy of 0.4° RMS. Positioning accuracy is 5.0m (GPS) or 3.0m (GPS + SBAS\/WAAS). The \u003cstrong\u003eSC33\u003c\/strong\u003e integrates Furuno’s advanced GNSS kinematic technology and a revolutionary dual-antenna system with speed sensors for precise measurements. It receives signals from the GPS, GLONASS, Galileo, and QZSS satellite constellations on L1 frequencies. The tracking rate is 45°\/second, with a maximum attitude update rate of 50 Hz and a position update rate of 10 Hz.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO SC33\u003c\/strong\u003e is NMEA2000 certified, with an NMEA0183 interface available via the optional IF-NMEASC unit. It is powered by 12-24 VDC. Its robust design makes it resistant to multipath interference, shocks, and vibrations, and it maintains accuracy even under a steel bridge if satellite signals are received. The unit includes a 3-axis gyroscope, acceleration sensors, a thermometer, and a barometer. It is designed to operate in ambient temperatures from -25°C to +55°C and features IP56 waterproofing. Its compact and aesthetic dome antenna is suitable for various vessel types. It is compatible with the Furuno NavNet TZtouch, NavNet TZtouch2, and NavPilot 300 series (with software update).\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089308561748,"sku":"IMD03668002","price":2907.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/SC-33_photo.png?v=1781278544"},{"product_id":"furuno-op20-50-kit-retrofit-sc30-sc33-compas-satellite","title":"OP20-50 Retrofit Kit SC30-SC33","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO OP20-50 retrofit kit\u003c\/strong\u003e is a solution designed to simplify the migration of satellite compass installations. It converts the existing wiring of a FURUNO SC-30 system to ensure compatibility with the SC-33 satellite compass. This approach reduces complexity and costs associated with a full wiring replacement during an upgrade.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance improvements with the SC-33\u003c\/h3\u003e\n\u003cp\u003e\n    By enabling the installation of the \u003cstrong\u003eSC-33 satellite compass\u003c\/strong\u003e, this kit provides access to improved technical specifications. The SC-33 offers a heading accuracy of 0.4° rms and a resolution of 0.1°, compared to 1.0° rms for the SC-30. Roll and pitch accuracy is also 0.4° rms. The SC-33 stabilization time is approximately 90 seconds, an improvement over the SC-30’s 3 minutes.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The SC-33 integrates multi-GNSS support, compatible with GPS, Galileo, GLONASS, and QZSS satellite networks, ensuring precise GNSS positioning (approximately 5m 2DRMS). It features a certified NMEA2000® interface, with an NMEA0183 option via the IF-NMEASC unit. Output data includes GNSS position, SOG, COG, ROT, heave, roll, pitch, and heading. The SC-33 system is compatible with NavNet TZtouch and NavNet TZtouch2 series, as well as TIMEZERO software, and allows menu access via NavPilot 300, TZT, or TZT2. The \u003cstrong\u003eOP20-50\u003c\/strong\u003e retrofit kit is powered by 12-24V DC, and components are designed for marine use.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089311773012,"sku":"00150681000","price":189.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-op20-50-kit-de-retrofit-sc30-sc33_00150681000-1.png?v=1781255755"},{"product_id":"furuno-fa70-ais-emetteur-recepteur-black-box-classe-b-sotdma-splitter-vhf","title":"FA70 — AIS Transceiver Black Box Class B SOTDMA 5W\/1W, integrated VHF splitter, GPS antenna","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO FA70\u003c\/strong\u003e is an AIS (Automatic Identification System) Class B+ SOTDMA transponder designed for safety and visibility at sea. This \"black box\" system integrates with existing multifunction displays on board, providing a discreet and high-performance solution for monitoring maritime traffic. The FA70 exchanges essential navigation data (ship name, call sign, position, heading, speed) with other AIS-equipped vessels and coastal stations, improving situational awareness.\n\u003c\/p\u003e\n\n\u003ch3\u003eSOTDMA technology and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The FA70 uses SOTDMA (Self-Organizing Time Division Multiple Access) technology, which guarantees a dedicated AIS transmission time slot, even in high-traffic areas. This feature ensures increased visibility and reliable data transmission compared to CS-TDMA systems. With selectable transmit power of 5 W or 1 W in SOTDMA (vs. 2 W for standard Class B), the FA70 offers extended detection range. It can receive up to 4,500 AIS reports per minute across two channels, processing data from both Class A and Class B AIS transponders.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified integration and installation\u003c\/h3\u003e\n\u003cp\u003e\n    This transponder includes an integrated VHF splitter, eliminating the need for a dedicated VHF antenna for AIS. It shares the vessel’s existing VHF antenna, simplifying installation and reducing clutter on the mast. The FA70 features an internal high-precision GPS receiver with WAAS (DGPS) capability and 12-channel reception, ensuring accurate positioning with a position accuracy of 13 meters (2 drms, HDOP \u003c= 4). Connectivity is provided via NMEA2000 ports (1 input, 1 output), NMEA0183 ports (2 inputs, 2 outputs), and a USB port (micro B), enabling flexible integration with various AIS-compatible radars and chartplotters, including Furuno NavNet systems. Silent mode can be activated via an external switch.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The transponder housing measures 177(L) x 55(H) x 158(D) mm and weighs 0.52 kg, facilitating installation in confined spaces. The GPS antenna unit has an IP56 waterproof rating, while other units are rated IP55, ensuring reliable operation in marine environments. Power is compatible with 12–24 VDC systems.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089354699092,"sku":"IMD031500AB","price":909.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-fa70-ais-emetteurrecepteur-black-box-classe-b-sotdma-5w1w-splitter-vhf-integre-antenne-gps_im-1.jpg?v=1781256556"},{"product_id":"furuno-adaptateur-nmea2000-micro5c-derivation-4-voies","title":"NMEA2000 MICRO5C MFFFFF Certified Adapter","description":"\u003cp\u003e\n    The \u003cstrong\u003eNMEA2000 MICRO5C MFFFFF certified FURUNO adapter\u003c\/strong\u003e (reference OD-NAW-MM1MF1MF4001) is a key component for establishing and extending NMEA2000 networks aboard vessels. Designed for seamless and reliable integration, this adapter functions as a 4-way splitter, allowing multiple devices to connect to the same NMEA2000 bus segment.\n\u003c\/p\u003e\n\u003ch3\u003eNMEA2000 Connectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With its MICRO5C MFFFFF connector configuration (one male and five female), this adapter facilitates the interconnection of various certified NMEA2000 marine electronic devices. It ensures stable data transmission compliant with standards, essential for sensors, multifunction displays, and other network peripherals. NMEA2000 certification guarantees compatibility and performance within existing or new network architectures.\n\u003c\/p\u003e\n\u003ch3\u003e4-Way Splitter Function\u003c\/h3\u003e\n\u003cp\u003e\n    The 4-way splitter function of the \u003cstrong\u003eFURUNO OD-NAW-MM1MF1MF4001 adapter\u003c\/strong\u003e provides a solution for organizing connections within the NMEA2000 network. It allows grouping and distributing NMEA2000 signals to four separate devices while maintaining the integrity of the main bus. This type of adapter is a structural element for installations requiring multiple connection points nearby, simplifying wiring and system maintenance.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56090855342420,"sku":"OD-NAW-MM1MF1MF4001","price":59.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-adaptateur-nmea2000-micro5c-mfffff-certifie_od-naw-mm1mf1mf4001-1.png?v=1781266044"},{"product_id":"furuno-gps-plotter-gp170-gpa017s-ecran-5-7-pouces-imo-wheelmark","title":"GP170\/GPA017S — GPS chartplotter 5.7\" VGA color LCD (640 x 480) WAAS\/EGNOS\/WM • GPA017S antenna\/15m cable •","description":"\u003cp\u003e\n    Designed for professional navigation, the \u003cstrong\u003eFURUNO GP170\/GPA017S\u003c\/strong\u003e is a reliable GPS chartplotter with a 5.7\" color LCD screen. This VGA display (640 x 480 pixels) delivers 700 cd\/m² brightness, ensuring clear visibility in various lighting conditions. It integrates a 12-channel GPS receiver with 2 SBAS channels, guaranteeing positioning accuracy not exceeding 10m (2 drms) for GPS and 3m (2 drms) with WAAS.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced accuracy and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGP170\/GPA017S\u003c\/strong\u003e features a 10 Hz position update rate, refreshing data every 0.1 seconds for responsive navigation. It supports SBAS augmentation systems (WAAS\/EGNOS), MSAS, QZSS and GLONASS, with an optional DGPS via a DGPS beacon receiver and GPA-021S antenna. The standard GPA017S antenna ships with a 15m cable. For system integration, this GPS chartplotter has 4 NMEA 0183 ports (2 In\/Out, 1 Out, 1 In\/Out IEC 61162-2), an Ethernet port IEC 61162-450 for bridge systems, and a front USB port for data import\/export.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    With memory capacity for 1,000 track points, 2,000 waypoints and 100 routes (each up to 1,000 waypoints), the \u003cstrong\u003eFURUNO GP170\/GPA017S\u003c\/strong\u003e provides extensive route planning capabilities. It operates on 12-24V DC and has an IP56 protection rating. Compliant with IMO MSC.112 (73), IEC 61108-1, IMO MSC.114 (73) and IEC 61108-4, it is Wheelmark certified. Features include improved position stability thanks to a new GPS chip and antenna, high tolerance to multipath signal attenuation, bridge alert management (BAM Ready), and various display modes such as Chartplotter, Highway, Course, Data and Integrity. Dual configuration is possible for redundancy, enabling data sharing between units.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56097867366740,"sku":"IMD03226014","price":2177.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-gp170gpa017s-gps-plotter-57-lcd-couleur-vga-640-x-480-waasegnoswm-antenne-gpa017scable-15m-_i-1.png?v=1781304617"},{"product_id":"furuno-op20-35-pics-anti-oiseaux-sc33-sc70-sc130","title":"OP20-35 Bird spikes (x9) (SC33\/70\/130)","description":"\u003cp\u003e\n    Designed to protect navigation equipment, the \u003cstrong\u003eFURUNO OP20-35 Bird spikes (x9)\u003c\/strong\u003e accessory is a deterrent solution specifically adapted to FURUNO satellite compass domes. This kit contains 9 spikes, intended to be installed on the radomes of SC33, SC70, and SC130 models. Their function is to prevent birds from perching, thus avoiding potential damage or obstructions to sensitive sensors housed in these domes.\n\u003c\/p\u003e\n\n\u003ch3\u003eTargeted Protection for Satellite Compasses\u003c\/h3\u003e\n\u003cp\u003e\n    Satellite compasses such as the \u003cstrong\u003eFURUNO SC33, SC70, and SC130\u003c\/strong\u003e are essential precision instruments for navigation. The OP20-35 bird spikes act as a physical barrier, making the radome surface inhospitable to birds without causing them harm. This preventive measure helps maintain the functional integrity and performance of the compasses by preventing the accumulation of droppings or physical degradation.\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecific Design and Implementation\u003c\/h3\u003e\n\u003cp\u003e\n    The design of the \u003cstrong\u003eOP20-35\u003c\/strong\u003e spikes is engineered for direct and compatible integration with the aforementioned radomes. Their installation secures these critical marine instruments against avian nuisances. This accessory ensures continuous protection, contributing to the reliability of heading and positioning data provided by FURUNO satellite compasses.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56098061484372,"sku":"00438082000","price":165.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-op20-35-pics-anti-oiseaux-x9-sc3370130_00438082000-1.jpg?v=1781305177"},{"product_id":"furuno-sc70-compas-satellitaire-gnss","title":"SC70 — Satellite Compass providing numerous data including GPS position, SOG (speed over ground","description":"\u003cp\u003e\n    Designed for navigation on small to medium-sized vessels, the \u003cstrong\u003eFURUNO SC70\u003c\/strong\u003e is a GNSS satellite compass that provides accurate navigation data. It offers GPS position, speed over ground (SOG), course over ground (COG), rate of turn (ROT), and 3-axis speed (bow, stern, and longitudinal), facilitating critical maneuvers such as docking.\n\u003c\/p\u003e\n\n\u003ch3\u003eGNSS Accuracy and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO SC70\u003c\/strong\u003e uses multiple global satellite navigation systems (GNSS), including GPS, Galileo, and GLONASS, to ensure continuous coverage and a heading accuracy of 0.4° RMS. It receives frequencies 1575.42 MHz (GPS\/GALILEO) and 1602.5625 MHz (GLONASS), with support for C\/A codes (GPS), E1B (GALILEO), and 1OF (GLONASS). Its startup time is approximately 90 seconds, and it features a fast tracking rate of 40°\/s. This compass is compatible with satellite-based augmentation systems (SBAS) such as EGNOS, WAAS, and MSAS for improved accuracy.\n\u003c\/p\u003e\n\n\u003ch3\u003eDisplay and Interface\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO SC70\u003c\/strong\u003e display is a 4.3-inch color LCD screen with a WQVGA resolution of 480 x 272 pixels and a brightness of 600 cd\/m². It offers multiple display modes: heading, navigation data, rate of turn, and speed. The unit also provides accurate pitch and roll data, available in both analog and digital formats, useful for vessel stabilization and sonar systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO SC70\u003c\/strong\u003e integrates with onboard networks via multiple interfaces, including AD10, IEC61162, IEC61162-2, IEC61162-450, NMEA2000, NMEA0183, CAN bus, RS-485, and an Ethernet port (LAN) on its junction box. This connectivity allows it to provide precise heading data to equipment such as autopilots, radars, ARPA, sonars, and chartplotters. The system is powered by 12-24V DC (consumption of 2.1-1.1A, including antenna and display). The antenna unit is rated IP56 for water and dust protection, while the display is IP22 (IP35 as an option) and the junction box is IP20 (IP22 for bulkhead mounting). The compass is IMO-certified as a THD (Transmitting Heading Device), GPS, and ROTI (Rate Of Turn Indicator) and requires no mechanical maintenance.","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56098089435476,"sku":"IMD0345200D","price":4173.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-sc70-compas-satellitaire-fournissant-de-nombreuses-donnees-incluant-position-gps-sog-vitesse_-1.png?v=1781305234"},{"product_id":"furuno-fa40-recepteur-ais-bi-frequence-black-box-nmea2000","title":"FA40 — AIS bi-frequency receiver Black Box, no VHF whip, NMEA2000 and NMEA0183 interface. Cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO FA40\u003c\/strong\u003e is a bi-frequency AIS receiver (Black Box type), designed to enhance navigation safety by providing essential information about nearby vessels equipped with AIS. This compact and lightweight unit simplifies integration with various marine navigation systems.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and features\u003c\/h3\u003e\n\u003cp\u003e\n    The FA40 operates within a frequency range of 156.025 MHz to 162.025 MHz, with a 25 kHz channel spacing. It uses a dual superheterodyne reception method and can process up to 2,250 reports per minute on one channel, or 4,500 reports per minute on two channels. Its sensitivity is -107 dBm or better (PER 20% or less). It receives real-time AIS Class A and Class B data, improving situational awareness for collision avoidance, even in low visibility or high-traffic areas.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for flexible integration, the FA40 is compatible with most AIS radars and chartplotters, including Furuno NavNet systems. It features an NMEA2000 port and two NMEA0183 serial ports (IEC61162-1, 4800\/38400 bps), plus a USB 2.0 port for maintenance and configuration. Power supply is 12–24 VDC (9.6–31.2 V), with a current draw of 0.3–0.2 A. The AIS receiver unit is waterproof to IP55 standards.\n\u003c\/p\u003e\n\u003ch3\u003eData and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The FA40 displays detailed information such as vessel name, call sign, position, course over ground (COG), speed over ground (SOG), rate of turn (ROT), heading, navigation status, MMSI number, IMO number, vessel type, cargo, length, draft, destination, and estimated time of arrival. Installation is straightforward thanks to compatibility with most VHF antennas. A signal splitter is available as an option to share the VHF antenna with a radio. Initial configuration can be performed via the NMEA2000 network, including with Furuno NavNet TZtouch2\/TZtouch3 displays.","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56098305835348,"sku":"IMD040100AA","price":666.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-fa40-ais-recepteur-bi-frequence-black-box-sans-fouet-vhf-interface-nmea2000-et-nmea0183-cabl_-1.jpg?v=1781305943"},{"product_id":"airmar-200wx-station-meteo-ultrasons-vent-gps","title":"200WX — AIRMAR ultrasonic weather station for wind speed and direction, designed for professional fishing","description":"\u003cp\u003e\n    The \u003cstrong\u003eAIRMAR 200WX ultrasonic weather station\u003c\/strong\u003e is designed for professional boats and marine or land applications requiring accurate real-time weather data. This compact and robust station measures multiple environmental parameters without moving parts, improving durability and reducing maintenance requirements.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccurate and dynamic wind measurements\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAIRMAR 200WX\u003c\/strong\u003e uses ultrasonic technology for wind measurement, offering a speed range of 0 to 40 m\/s with a resolution of 0.1 m\/s and an accuracy of 5% at 10 m\/s across 4 angles. Wind direction is measured from 0° to 359.9° with a resolution of 0.1° and an accuracy of ±3° at 10 m\/s. It calculates true wind by integrating apparent wind data with vehicle speed and heading, provided by its internal 10 Hz GPS and 3-axis electronic compass.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated sensors and versatile connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with a 10 Hz GPS, the station provides position, speed over ground (SOG), and course over ground (COG) data with an accuracy of 3 meters CEP. It integrates a 3-axis electronic compass with a static heading accuracy of 1° and dynamic heading accuracy of 2°, featuring dynamic stabilization. A 3-axis gyrometer provides yaw rate data, and a 3-axis accelerometer offers pitch and roll information with an accuracy of ±1° within a range of ±30°.\n\u003c\/p\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAIRMAR 200WX\u003c\/strong\u003e also measures barometric pressure from 300 to 1100 hPa (accuracy ±0.5 hPa at 25°C) and air temperature from -40 to 80°C (accuracy ±1.1°C at 20°C). A relative humidity sensor option is available. The station is powered by 9 to 40 VDC with a consumption of less than 75 mA (\u003c0.9 W) at 12 VDC. It provides RS-232, RS-422, and CAN communication interfaces, supporting NMEA 0183\/ASCII and NMEA 2000 protocols for extended system integration. Its housing is rated IPX6 (IPX4 with the optional relative humidity sensor), weighs 300 g, and mounts on a standard 1\"-14 UNS thread. Its operating temperature range is -25 to 55°C.\n\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":56098344534356,"sku":"AI-200WXFU-RS422-01","price":1507.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/airmar-200wx-station-meteo-statique-a-ultrasons-vitesse-et-vent-airmar-destinee-a-la-peche-professio-1.jpg?v=1781306000"},{"product_id":"furuno-fm4800-vhf-marine-gps-ais-dsc-loudhailer","title":"FM4800 — Marine VHF radiotelephone - The ultimate 5-in-1 tool, VHF radio, GPS, AIS receiver, Load hai","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO FM4800\u003c\/strong\u003e is an all-in-one marine VHF radiotelephone integrating five essential functions for navigation and safety at sea. This unit combines a VHF radio, a GPS receiver, an AIS receiver, a Digital Selective Calling (DSC) class D function, and a loudhailer with intercom capabilities, all within a compact unit.\n\u003c\/p\u003e\n\n\u003ch3\u003eVHF Communication and Integrated Safety\u003c\/h3\u003e\n\u003cp\u003e\n    The FM4800 offers switchable VHF output power of 25 W or 1 W, ensuring reliable communication on international, US, and Canadian channels. Its built-in AIS receiver operates on frequencies 161.975 MHz (AIS1) and 162.025 MHz (AIS2), enabling AIS target detection for improved situational awareness and collision avoidance. The DSC class D functionality facilitates routine and distress calls, enhancing safety at sea.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccurate Navigation and System Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with an internal high-sensitivity 72-channel GPS receiver with integrated antenna, the \u003cstrong\u003eFURUNO FM4800\u003c\/strong\u003e provides 10-meter positioning accuracy with a one-second update interval, eliminating the need for an external GPS antenna for DSC functions. The unit features NMEA2000 and NMEA0183 interfaces, allowing the sharing of GPS, DSC, and AIS data with other onboard electronics such as chartplotters and multifunction displays (MFD). It can also serve as a backup GPS source for connected systems. When the MOB (Man Overboard) mode is activated on a compatible Furuno MFD (e.g., NavNet TZtouch2), the FM4800 can initiate a distress call via its rotary knob.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio Functions and Marine Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The FM4800’s built-in loudhailer delivers a maximum output of 30 W (at 4 ohms), with 8 automatic fog and warning signals. The listen function allows external sounds to be captured and retransmitted via the internal loudspeaker, useful for communication between the deck and the bridge. The main unit is IP67 certified, ensuring resistance to immersion. It supports up to three HS-4800 handsets and SP-4800 speakers, offering dual-station capability and intercom functions. The FM4800 also includes 10 weather channels and an ATIS mode for inland waterways. Its compact housing and aesthetics are designed to integrate with other Furuno equipment such as the NavNet TZtouch2 and FI70 series.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56098359574868,"sku":"IMD034960AC","price":668.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-fm4800-vhf-radiotelephone-marine-loutil-ultime-5-en-1-radio-vhf-gps-recepteur-ais-load-hai_im-1.jpg?v=1781306056"},{"product_id":"simrad-pro-gs70-n2k-antenne-gps-marine","title":"Simrad GS70 NMEA 2000 GPS Antenna","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad Pro GS70 N2K\u003c\/strong\u003e intelligent GPS antenna is a marine navigation solution designed for professional and recreational applications requiring precise positioning and simplified network integration. This antenna complies with IMO (International Maritime Organization) requirements, making it suitable for professional navigation systems.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning accuracy and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The GS70 N2K integrates a 32-channel GNSS receiver, compatible with L1 (C\/A code, 1.575 GHz) and L2 (C\/A code, 1.602 GHz) frequencies. It offers a configurable position refresh rate up to 10 Hz (1, 5 or 10 Hz), ensuring rapid updates of navigation data. The horizontal GPS accuracy (2DRMS) reaches 5 meters (16.4 feet). With DGPS corrections from SBAS systems (WAAS, EGNOS, MSAS), accuracy improves to 2 meters. The antenna also supports RTCM corrections via the NMEA 2000 bus, and the MX610 junction box can convert these corrections to NMEA 2000 format. Cold start time is approximately 50 seconds, while a warm start takes only 3 seconds, with satellite reacquisition in 5 seconds.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for seamless integration, the GS70 antenna uses a standard NMEA 2000 (N2K) interface for easy \"plug-and-play\" installation. It is compatible with Simrad GPS displays P3007 (for IMO applications) and P2005 (for non-IMO applications), as well as with Simrad navigation systems GN70, MX610 or MX612 via the NMEA 2000 bus. Environmentally, the GS70 is rated IPX7 for immersion resistance and can operate within a temperature range of -25°C to +60°C. Its compact design has dimensions of 90 mm in diameter and 38 mm in height, with a weight of approximately 0.14 kg. Power is supplied by an input voltage of 9 V DC to 18 V DC, with power consumption below 2 W and reverse polarity protection.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and NMEA 2000 PGNs\u003c\/h3\u003e\n\u003cp\u003e\n    The NMEA 2000 connectivity allows the GS70 to transmit a range of essential PGNs (Parameter Group Numbers), including system time (126992), attitude (127257), position (129025, 129029), COG and SOG (129026), GNS DOP (129539), satellites in view (129540), and various GNSS error and correction statistics (129542, 129545, 129546, 129547, 129549, 130852).\n\u003c\/p\u003e","brand":"Simrad Pro","offers":[{"title":"Default Title","offer_id":56126091002196,"sku":"000-11137-001","price":788.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/navico-gs70-n2k-gps-antenna_000-11137-001-01.webp?v=1781618678"},{"product_id":"navico-point-1-ap-antenne-gps-capteur-pilote-automatique","title":"Navico POINT-1 AP GPS Antenna for Autopilot","description":"\u003cp\u003e\n    Designed for precise marine navigation, the \u003cstrong\u003eNavico POINT-1 AP Autopilot\u003c\/strong\u003e GPS and heading antenna is an NMEA 2000® sensor that integrates advanced features for autopilot systems and multifunction displays. It provides position and boat speed updates at a 10 Hz rate, ensuring smooth and rapid location and heading tracking on the network. Its built-in electronic compass guarantees heading accuracy to within +\/- 3°, essential for chart stabilization and radar overlay, even at low speed.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and Heading Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003ePOINT-1 AP\u003c\/strong\u003e supports GPS and GLONASS constellations, with Galileo compatibility via software updates. It is also compatible with SBAS systems (WAAS\/EGNOS\/MSAS) for 3-meter horizontal accuracy. The sensor delivers heading data at 10 Hz, with a turn rate accuracy of +\/- 3° and roll\/pitch accuracy at 30° of +\/- 1°. Cold start time is 50 seconds, with a 3-second warm start and 3-second satellite reacquisition.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and NMEA 2000® Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a compact 90 mm diameter and 30 mm height design and a weight of 0.14 kg, the \u003cstrong\u003eNavico POINT-1 AP\u003c\/strong\u003e is fully waterproof and built to withstand marine environments. It operates across a temperature range of -25°C to +60°C and supports 93% humidity at 40°C. Power input is 5 to 18 V DC, with consumption under 2 W and reverse polarity protection. Connection to the NMEA 2000® network is via a Micro C connector, allowing flexible installation in flush-mount or standard mast configurations. It transmits numerous NMEA 2000® PGNs, including system time, position data (including fast updates), COG \u0026 SOS, GNS DOP, satellites in view, magnetic variation, compass heading, turn rate, and attitude.","brand":"Navico","offers":[{"title":"Default Title","offer_id":56128051446100,"sku":"000-12930-002","price":279.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/web-navico-point-1-ap-autopilot-gps-antenna_000-12930-002-01.webp?v=1781619147"},{"product_id":"navico-nais-500-transpondeur-ais-classe-b-gps","title":"NAIS-500 AIS Class B Transponder with GPS-500","description":"\u003cp\u003e\n    The Navico NAIS-500 Class B AIS transponder, supplied with its GPS-500 antenna, is a compact and high-performance solution for enhancing safety at sea. This standalone Class B system transmits your vessel’s identity and position data while receiving that of other AIS-equipped vessels, enabling better anti-collision maneuver planning in high-traffic areas. Positioned as an economical alternative to Class A systems, the NAIS-500 is ideal for recreational boats and small commercial vessels, offering transmission power and reporting rate tailored to their specific needs.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The NAIS-500 features versatile connectivity, integrating NMEA 2000 (LEN=1), two NMEA 0183 ports (one high-speed at 38,400 baud for chartplotters and one low-speed at 4,800 baud for other equipment), and a USB port (mini-B) for connection to a PC or Mac. This flexibility ensures seamless integration with Navico ecosystems, including Simrad multifunction displays (NSS, NSO, GO series), Lowrance (HDS Carbon, HDS Gen3), and B\u0026G (Vulcan, Zeus series). The integrated NMEA 0183 multiplexing function optimizes data management across serial ports. The transponder is supplied with a multipole accessory cable for power (9.6 V – 31.2 V DC) and NMEA 0183 connections, as well as an input for an external silent-mode switch. A VHF antenna (SO-239 connector) and an external GPS antenna (SMA connector) are required, with the GPS-500 antenna included.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications and Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    Measuring 152 x 98 x 52 mm and weighing 260 g, the \u003cstrong\u003eNAIS-500\u003c\/strong\u003e is designed for discreet installation. It operates on a frequency range of 156.025 to 162.025 MHz with an output power of 33 dBm ± 1.5 dB. Its internal 50-channel GPS receiver complies with IEC 61108-1, ensuring reliable position acquisition. Average power consumption is 180 mA at 12 V DC, with a peak current of 2 A. Certified to IP67 and tested to IEC 60945 (Protected category), it provides optimal resistance to marine environments, supporting operating temperatures from -15°C to +55°C. LED indicators (power, error, reception, transmission\/silent mode) offer quick diagnostics of the device’s status. The NAIS-500 complies with CE, FCC, Industry Canada, IEC 61108-1, and IEC 60945 certifications.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56129209467220,"sku":"000-13609-001","price":829.0,"currency_code":"EUR","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/gps.png?v=1774455755","url":"https:\/\/skysat.fr\/en-us\/collections\/gps.oembed","provider":"Skysat","version":"1.0","type":"link"}