{"title":"Integral","description":"\u003ch2\u003e Integrel: Innovative marine energy solutions\u003c\/h2\u003e\n\n \u003cp\u003eIntegrel is a British manufacturer specializing in the design of alternator-based marine power systems. Their E-Power technology revolutionizes onboard power management by transforming the engine's alternator into a high-power generator coupled with a smart battery charger. This approach allows sailboats and motorboats to produce a significant amount of power while under power, often eliminating the need for an auxiliary generator. Renowned for its energy efficiency and seamless integration with existing systems, Integrel is a preferred solution for sailors looking to maximize their electrical autonomy. Skysat is skilled in the installation and configuration of these systems to guarantee reliable power production tailored to your needs.\u003c\/p\u003e\n\n\n\u003ch2\u003e E-power system: generator integrated into the alternator\u003c\/h2\u003e\n\n \u003cp\u003eIntegrel's E-Power system replaces the engine's standard alternator with a specially designed high-power alternator capable of generating up to 9 kW of electrical energy. Unlike a conventional alternator limited to a few tens of amps, the E-Power can deliver several hundred amps for rapid battery charging and direct powering of onboard equipment.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHigh-power alternator:\u003c\/strong\u003e Reinforced 12V or 24V alternator capable of producing between 120A and 750A depending on the model. Designed to operate at a wide range of engine speeds (from idle to full throttle) while maintaining optimal energy efficiency. Integrated liquid cooling prevents overheating during extended use.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eMulti-stage charge regulator:\u003c\/strong\u003e Advanced control electronics that automatically manage the charging phases (bulk, absorption, float) according to the battery type (AGM, gel, lithium, flooded lead-acid). Dynamically adapts the charging current to maximize battery life and prevent overcharging.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eEngine integration without modification:\u003c\/strong\u003e Direct replacement of the original alternator without any mechanical modifications to the engine. Compatible with most marine diesel engines (Yanmar, Volvo Penta, Nanni, Vetus). Simplified installation thanks to adapted mounting brackets and standardized electrical connections.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e Intelligent energy management\u003c\/h2\u003e\n\n \u003cp\u003eThe Integrel system incorporates intelligent energy management that optimizes electrical production based on actual onboard needs, battery status, and engine speed. This automation maximizes energy efficiency and reduces fuel consumption.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eReal-time monitoring:\u003c\/strong\u003e Display of charging parameters (voltage, current, power, battery charge status) on a dedicated control screen or via an NMEA 2000 interface. Automatic alerts in case of threshold exceedances or malfunctions.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eLoad prioritization:\u003c\/strong\u003e Ability to define load priorities for different battery banks (service, starting, electric propulsion). Automatic management of energy distribution to guarantee the availability of critical batteries.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eFuel economy mode:\u003c\/strong\u003e Engine speed optimization function to achieve the best compromise between energy production and fuel consumption. Automatic suggestion of the ideal engine speed based on the battery charge level.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e Compatible with lithium batteries\u003c\/h2\u003e\n\n\u003cp\u003e Integrel systems are fully compatible with lithium (LiFePO4) batteries, which are increasingly popular in marine applications due to their energy density, longevity, and fast charging capabilities. The E-Power charge controller automatically adapts to the specific charging profiles of lithium batteries.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eProgrammable charging profiles:\u003c\/strong\u003e Fine-tuning of charging voltages and currents according to battery manufacturer specifications. Consideration of thermal and electrical charging limits to guarantee cell safety and lifespan.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eBattery management system (BMS) communication:\u003c\/strong\u003e Communication interface with lithium battery management systems for coordinated charge control. Automatic charging shutdown in case of a BMS alert (excessive temperature, cell imbalance, overcurrent).\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHigh-power fast charging:\u003c\/strong\u003e Ability to charge large capacity lithium battery banks (up to several hundred kWh) in a few hours of motoring, providing exceptional energy autonomy for offshore sailing.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e Installation and maintenance\u003c\/h2\u003e\n\n\u003cp\u003e Installing an Integrel system requires technical expertise to ensure a robust mechanical assembly, correctly sized electrical wiring, and appropriate software configuration. Skysat has the necessary experience to integrate these systems professionally and reliably.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eCable sizing:\u003c\/strong\u003e Precise calculation of cable cross-section based on maximum load current and cabling length. Use of large cross-section cables (50 mm² to 95 mm²) to minimize losses and prevent overheating. Installation of professional crimped lugs and appropriate fuse protection.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eReinforced mechanical mounting:\u003c\/strong\u003e Check the strength of the alternator bracket and reinforce it if necessary to support the weight and vibrations of the high-power alternator. Precise alignment of the alternator pulley with the engine pulley to prevent premature belt wear.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAppropriate drive belt:\u003c\/strong\u003e Replace the original alternator belt with a reinforced belt (multi-ribbed poly-V type) capable of transmitting the high power. Belt tension adjusted according to the manufacturer's recommendations to prevent slippage and rapid wear.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eConfiguration and calibration:\u003c\/strong\u003e Programming of the charge controller according to the type and capacity of the onboard batteries. Complete load test after installation to verify system stability and the absence of faults. Crew training on the use and monitoring of the system.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cstrong\u003eSkysat's advice\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Integrel E-Power system is particularly well-suited to sailboats that regularly use the engine (entering and leaving port, navigating in calm waters). To maximize its efficiency, it is recommended to run the engine at a moderate speed (1500-2000 rpm) for a sufficient duration to allow for a full battery charge. Ensure adequate ventilation in the engine room to dissipate the heat generated by the alternator and charge controller. Finally, combine the Integrel system with comprehensive energy monitoring (such as the Victron Cerbo GX) to visualize energy flows in real time and optimize your onboard electrical consumption.\u003c\/p\u003e","products":[{"product_id":"integrel-alternateur-e-power-18-de","title":"E-Power 18 DE Alternator","description":"\u003cp\u003e\n    The Integrel E-Power 18 DE alternator (ISP18DE007) is a power generation component designed for advanced marine electrical systems. Weighing 40 kg, it is built to integrate into Integrel’s E-Power ecosystem, which optimizes power production and management aboard vessels. This alternator meets the needs of applications requiring high charging capacity and significant electrical autonomy.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and energy performance\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike conventional marine alternators, the Integrel E-Power 18 DE is part of a systemic approach. It is designed to operate synergistically with other elements of the Integrel system, such as service batteries and controllers, to ensure efficient power production and optimized distribution. Its design aims to maximize onboard energy availability, critical for electronic equipment, auxiliary electric propulsion systems, or high-power consumers.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and applications\u003c\/h3\u003e\n\u003cp\u003e\n    The Integrel E-Power 18 DE alternator targets the segment of high-capacity marine power generation solutions. While brands like Victron Energy or Mastervolt offer externally regulated alternators for customized installations, the E-Power 18 DE is specifically optimized for deep integration within a complete Integrel system. It is aimed at owners of cruising sailboats, motor yachts, or professional vessels seeking an integrated, high-performance energy management solution capable of handling significant loads while optimizing the main engine’s efficiency.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723757707604,"sku":"ISP18DE007","price":31381.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/fathom-e-power-system-with-24kwh-battery-bank-800x_doc1.png?v=1779978637"},{"product_id":"integrel-alternateur-e-power-9-se","title":"E-Power 9 SE Alternator","description":"\u003cp\u003e\n    The Integrel E-Power 9 SE alternator (ISP9SE007) is a key component for onboard electrical power generation systems. Weighing 40 kg, this alternator is designed to meet the energy needs of marine applications, ensuring efficient charging of battery banks.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Manufactured by Integrel, this E-Power 9 SE alternator is part of an integrated approach to marine electrical systems. It is intended to function as a primary DC power source, converting the engine’s mechanical energy into electrical energy to power onboard equipment and recharge batteries.\n\u003c\/p\u003e\n\u003ch3\u003eMarket Positioning\u003c\/h3\u003e\n\u003cp\u003e\n    Integrel’s E-Power 9 SE model positions itself as an energy generation solution. Without detailed specifications provided, a direct comparison with other alternators in the Integrel range or competitors such as Mastervolt or Victron Energy is not possible. Its 40 kg weight indicates robust construction suitable for applications requiring significant power output.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723757936980,"sku":"ISP9SE007","price":15649.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506550075732-1000.jpg?v=1783616597"},{"product_id":"integrel-alternateurs-dual-e-drive-30-kw","title":"OBSOLETE - Dual E-Drive 30 kW Alternators","description":"\u003cp\u003e\n    The \u003cstrong\u003eIntegrel Dual E-Drive 30 kW\u003c\/strong\u003e system, reference ISP30DE, is an integrated propulsion and electric power generation solution designed for demanding marine applications. This device combines two 15 kW e-drive motors, delivering a combined output of 30 kW, to provide versatility in auxiliary propulsion or electric power production.\n\u003c\/p\u003e\n\u003ch3\u003eArchitecture of the Integrel Dual E-Drive 30 kW system\u003c\/h3\u003e\n\u003cp\u003e\n    The ISP30DE system consists of two 15 kW e-drive motors each, paired with two dedicated controllers for independent or synchronized operation. The user interface is provided by a square display and a round display, enabling monitoring and control of operating parameters. Two Curtis motors are also included, completing the propulsion assembly. For energy optimization, three battery bank sensors are integrated, ensuring precise management of battery banks. Connectivity is centralized via a splitter junction box.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and adaptability\u003c\/h3\u003e\n\u003cp\u003e\n    Mechanical integration of the \u003cstrong\u003eIntegrel Dual E-Drive 30 kW\u003c\/strong\u003e system is facilitated by the inclusion of two engine adapter plates and two adapter plates for reverse gear or saildrive. This modularity allows the system to be adapted to various existing propulsion configurations. A VC20 selector is included for managing the thermal engine and the e-drive system, providing operational flexibility to switch between propulsion or power generation modes. This system serves as an alternative to traditional high-output alternators, such as those offered by competing brands in the marine hybrid systems sector, by providing a dual, complete solution for vessels requiring high energy availability and power redundancy.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723758068052,"sku":"ISP30DE","price":63515.32,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/integrel-edrive-cover_36f6410f-9a5d-493d-b9fc-a582b6e45bf3.png?v=1780004683"},{"product_id":"integrel-alternateurs-dual-e-drive-systeme-30kw-sans-plaque","title":"Dual E-Drive 30 kW alternators system (without plate)","description":"\u003cp\u003e\n    Designed for demanding marine applications, Integrel’s Dual E-Drive 30 kW alternator system (reference ISD30DE00NP) is a high-power electrical generation solution. This system is intended for vessels requiring significant charging capacity for their battery banks or for powering auxiliary systems and electric\/hybrid propulsion.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning and technical features\u003c\/h3\u003e\n\u003cp\u003e\n    With a rated power of 30 kW, this system targets the segment of electrical generation equipment for medium to large vessels. Unlike conventional marine alternators, the \"Dual E-Drive\" concept suggests an architecture potentially offering redundancy or performance optimization under varying loads. The absence of a mounting plate (\"sans plaque\") indicates this component is designed for custom integration, requiring vessel-specific installation engineering. It is not an \"off-the-shelf\" solution like some standalone generators or smaller alternators from brands such as Mastervolt or Victron Energy, but rather a central element for a complex energy management system.\n\u003c\/p\u003e\n\u003ch3\u003ePotential applications\u003c\/h3\u003e\n\u003cp\u003e\n    The Integrel ISD30DE00NP system is suitable for offshore cruising sailboats, catamarans, motor yachts, or workboats that benefit from a continuous and reliable power source. Its 30 kW capacity can handle substantial electrical loads, such as air conditioning, watermakers, bow thrusters, or supplement a hybrid propulsion system. Integration requires a thorough study of the vessel’s electrical architecture to maximize efficiency and durability.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723758264660,"sku":"ISD30DE00NP","price":53000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/integrel-edrive-cover_65b29d17-5a99-4a71-b9de-789d565ef36f.png?v=1780004685"},{"product_id":"integrel-alternateur-single-e-drive-15-kw-energie-marine","title":"OBSOLETE - Single E-Drive 15 kW Alternator","description":"\u003cp\u003e\n    Designed for demanding marine power requirements, the Integrel Single E-Drive 15 kW alternator (reference ISP15SE) is an embedded power generation solution. Positioned as a high-power device, it targets vessels requiring constant and reliable electrical production to power complex systems or high consumption loads. Its 15 kW capacity indicates an ability to handle significant loads, distinguishing it from lower-power alternators often found on smaller vessels or those with lower power needs. It belongs to the Integrel range, known for its marine electrification solutions.\n\u003c\/p\u003e\n\n\u003ch3\u003ePower generation and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Integrel ISP15SE alternator delivers 15 kW of power, enabling rapid charging of battery banks or direct power supply to onboard electrical systems. Unlike dual-drive systems (such as the Integrel Dual E-Drive 30 kW, whose existence is suggested by product images but not detailed in this context), this \"Single E-Drive\" model offers a single-unit configuration. This can simplify mechanical integration for certain types of installations while providing substantial power output. Its role is to convert the main engine’s mechanical energy into electrical energy for onboard equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarket positioning\u003c\/h3\u003e\n\u003cp\u003e\n    With its 15 kW output, the Integrel ISP15SE alternator targets the segment of power generation equipment for medium to large boats or vessels equipped with energy-intensive electronic and comfort systems. It provides an alternative to dedicated generators by leveraging the boat’s existing propulsion power. Its price reflects its positioning as a high-capacity marine electrical system component.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723758526804,"sku":"ISP15SE","price":31673.31,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_26572da7-2a36-46b1-aaa4-0fe2771485de.png?v=1779978368"},{"product_id":"integrel-capteur-batterie-e-drive-48v","title":"E-Drive 48V battery sensor","description":"\u003cp\u003e\n    Designed for marine electric propulsion systems, the Integrel E-Drive 48V battery sensor provides dedicated monitoring of 48V batteries. This component is essential for maintaining the efficiency and longevity of battery banks in E-Drive installations. It specifically integrates into energy architectures based on a 48-volt voltage, typical of electric propulsion systems and high-capacity service battery banks.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration with E-Drive systems\u003c\/h3\u003e\n\u003cp\u003e\n    The Integrel E-Drive 48V battery sensor is a link in the energy management chain. Unlike more generic battery monitors, it is specifically sized for the requirements of 48V systems, where precise monitoring of current, voltage, and state of charge is critical. It serves as a key element for owners of sailboats or motorboats equipped with Integrel electric propulsion solutions or compatible systems. This sensor enables the collection of data necessary for the optimal operation of these systems.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and features\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor is aimed at users seeking a reliable monitoring solution for their 48V systems. While brands like Victron Energy or Mastervolt offer versatile battery monitors, the Integrel sensor is designed for native and optimized integration within the brand’s E-Drive ecosystems. It enables precise data collection for displaying critical information on compatible displays, contributing to proactive energy management on board and a better understanding of consumption and remaining capacity.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723758690644,"sku":"ISD0005","price":890.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/integrel-edrive-cover_7e815c4c-9460-4753-8f7c-591c22ca9365.png?v=1780004686"},{"product_id":"integrel-capteur-batterie-e-power-48v","title":"E-Power 48V battery sensor","description":"\u003cp\u003e\n    Designed for modern marine electrical architectures, the E-Power 48V Integrel battery sensor (ISP0009) is a component dedicated to monitoring battery banks operating at a nominal voltage of 48 volts. This type of sensor is integrated into energy management systems to provide essential data on battery status, thereby contributing to the optimization of their performance and longevity.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Functionality\u003c\/h3\u003e\n\u003cp\u003e\n    The primary role of this sensor is to collect critical information about the battery. While detailed specifications of its measurements are not provided, a 48V battery sensor such as the ISP0009 typically monitors parameters such as voltage, current, and potentially temperature. This data is then used by a battery management system (BMS) or a power controller to assess state of charge (SOC), state of health (SOH), and other important indicators. This process enables more efficient energy use and early detection of potential issues.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarket Positioning\u003c\/h3\u003e\n\u003cp\u003e\n    Integrel targets the segment of high-performance marine energy solutions, particularly for 48V systems that are increasingly common on vessels with high electrical loads or hybrid\/electric propulsion. The ISP0009 sensor fits into this approach, providing a key link for the reliability and performance of these installations. Weighing 0.197 kg, it is a lightweight component designed to integrate discreetly into the technical spaces of boats.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723758920020,"sku":"ISP0009","price":885.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_240e44e8-5871-4730-a648-fc19a20e405d.png?v=1779978099"},{"product_id":"integrel-ecran-supplementaire-marine","title":"OBSOLETE - Additional display","description":"\u003cp\u003e\n    The Integrel additional display is designed to complement the brand’s energy management systems. It extends the visualization of operational data and system performance indicators to an additional location aboard the vessel.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration with the Integrel system\u003c\/h3\u003e\n\u003cp\u003e\n    This display integrates with the existing network to provide a consistent user interface. Its primary function is to replicate or display specific information generated by the Integrel system, such as battery charge state, energy production, or onboard equipment consumption. It ensures continuity of essential information for effective energy management.\n\u003c\/p\u003e\n\n\u003ch3\u003eProduct positioning\u003c\/h3\u003e\n\u003cp\u003e\n    As a dedicated accessory, the Integrel additional display serves as an extension for users seeking greater flexibility in monitoring their energy installation. Unlike generic multifunction displays, it is specifically optimized for the Integrel ecosystem, guaranteeing native compatibility and data presentation tailored to the energy management system’s monitoring needs.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723759083860,"sku":"SHOPIFY-12506551124308","price":2467.11,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/integrel-edrive-cover_458d2622-d739-4544-99b5-262d34eb85ce.png?v=1780004688"},{"product_id":"integrel-plaque-adaptation-yanmar-jh-cr-45-57","title":"Yanmar JH-CR 45\/57 adapter plate","description":"\u003cp\u003eThe \u003cstrong\u003eIntegrel adapter plate for Yanmar JH-CR 45\/57\u003c\/strong\u003e is a high-precision mechanical component essential for installing the Integrel power generation system on Yanmar marine engines with common rail injection rated at 45 and 57 horsepower. This part ensures the structural connection between the original engine block and the high-power generator.\u003c\/p\u003e\n\u003ch3\u003eCustom engineering for Yanmar engines\u003c\/h3\u003e\n\u003cp\u003eUnlike universal mounts often prone to vibration, this plate is specifically machined to fit the exact mounting points of the Yanmar JH-CR 45 and 57 models. It guarantees perfect geometric alignment of the drive belt. This level of precision is critical to efficiently transfer mechanical power to the Integrel system without imposing asymmetric loads on the engine or generator bearings.\u003c\/p\u003e\n\u003ch3\u003eMechanical reliability in marine environments\u003c\/h3\u003e\n\u003cp\u003eDesigned to meet the demands of high-capacity power management systems, this mounting plate withstands the high torque generated during rapid battery bank charging. It forms the fundamental foundation for reliable onboard electricity production, thereby securing your overall energy management installation investment.\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723759247700,"sku":"ISD0008","price":2650.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/integrel-edrive-cover_57725522-ddb9-4052-ad64-937726f183b6.png?v=1780004689"},{"product_id":"integrel-plaque-adaptation-yanmar-jh-cr-80-110-zf25a","title":"OBSOLETE - Yanmar JH-CR 80\/110 ZF25A adapter plate","description":"\u003cp\u003eThe \u003cstrong\u003eIntegrel\u003c\/strong\u003e adapter plate for Yanmar JH-CR 80 and 110 horsepower engines equipped with a ZF25A reduction gear is a high-precision mechanical component. Designed in the United Kingdom, it is essential for integrating the Integrel power generation system on your sailboat or catamaran. This interface ensures a robust and perfectly aligned mechanical coupling between the high-power generator and the main engine block.\u003c\/p\u003e\n\n\u003ch3\u003eA mechanical design for very high power\u003c\/h3\u003e\n\u003cp\u003eUnlike standard alternator mounts or custom-made solutions, this Integrel adapter plate is specifically machined to withstand the extreme mechanical stresses associated with very high-efficiency power generation. It guarantees millimetric alignment of the drive belts and optimal distribution of torsional forces on the Yanmar engine. This manufacturing precision preserves the longevity of your propulsion system while maximizing the charging efficiency of your service battery bank.\u003c\/p\u003e\n\n\u003ch3\u003eSafety and compliance of the Integrel system\u003c\/h3\u003e\n\u003cp\u003eThis component is the only mounting solution validated by the manufacturer for the Yanmar JH-CR 80\/110 configuration with ZF25A transmission. Using this original adapter plate is mandatory to certify the installation of the Integrel energy management system. It ensures industrial-grade reliability and total safety during offshore navigation, far exceeding generic adaptations that could compromise engine integrity.\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723759444308,"sku":"ISD30DE004","price":7211.54,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/integrel-edrive-cover_e07ad34b-ef1b-4786-9a90-a8d17ef26417.png?v=1780004691"},{"product_id":"integrel-plaque-adaptation-yanmar-sail-drive-sd60-5","title":"Yanmar Sail Drive SD60-5 adapter plate","description":"\u003cp\u003eThe Integrel Yanmar Sail Drive SD60-5 adapter plate (reference ISD0013) is a mechanical transmission component designed for integrating the power generation system with your marine engine. Machined in the United Kingdom, it ensures a rigid mount and perfect alignment between the Integrel high-power generator and the Yanmar SD60-5 Sail Drive transmission.\u003c\/p\u003e\n\n\u003ch3\u003eReliability and mechanical integration\u003c\/h3\u003e\n\u003cp\u003eThe Integrel system replaces a traditional generator by harnessing the excess power from the propulsion engine. Unlike standard or universal alternator mounts that can generate vibrations, this plate is specifically sized to withstand the mechanical stresses and high torque of the Integrel system. It guarantees optimal energy transfer without compromising the integrity of the Yanmar engine.\u003c\/p\u003e\n\n\u003ch3\u003eMounting specifications for SD60-5\u003c\/h3\u003e\n\u003cp\u003eDesigned exclusively for Yanmar Sail Drive SD60-5 stern drives, this adapter plate prevents premature wear of belts and bearings. By ensuring exact mounting geometry, it secures the installation of your onboard energy management system for extended and demanding sailing.\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":53723759640916,"sku":"ISD0013","price":2564.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/integrel-edrive-cover_9f262098-39cf-4885-a240-098917128d8f.png?v=1780004692"},{"product_id":"integrel-montage-support-yanmar-jh-cr-production-energie","title":"mounting bracket - YANMAR JH-CR","description":"\u003cp\u003e\n    Designed for the integration of the Integrel E-Power\/E-Drive system, the \u003cstrong\u003eIntegrel mounting bracket for YANMAR JH-CR\u003c\/strong\u003e allows the onboard E-POWER generator (OEG) to be installed directly on Yanmar JH-CR marine diesel engines. This bracket facilitates the replacement of traditional generators by using the excess power from the main propulsion engine to produce electrical energy, stored in a 48V battery bank.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and energy production\u003c\/h3\u003e\n\u003cp\u003e\n    The bracket is mounted at the front of the Yanmar JH-CR engine, adding less than 150 mm to the axial length of the engine and gearbox. The Integrel E-Power system, made possible by this bracket, includes two intelligent controllers configured to operate in harmony with the engine and battery system, an Integrel E-Power display for data visualization (OEG, engine, batteries), and a smart switch for power and data transfer. The system is internally tested and manages OEG performance to prevent engine overload.\n\u003c\/p\u003e\n\n\u003ch3\u003eCapabilities and benefits\u003c\/h3\u003e\n\u003cp\u003e\n    A simple E-Power system can generate up to 9 kW of power, or up to 18 kW for a dual configuration on multihulls, with typical output of 7 to 8 kW depending on engine compartment temperature. The E-Drive system, in turn, can produce up to 15 kW or a maximum of 30 amps. This solution is compatible with Yanmar JH-CR engines from 40 to 110 hp. It offers fully automatic power management, optimizing engine operation for maximum efficiency and enabling fuel savings of up to 25%. Additional benefits include reduced emissions, quiet operation, and minimal maintenance requirements. The system integrates via the Yanmar engine’s J1939 diagnostic port for direct connection to a chartplotter.","brand":"Integrel","offers":[{"title":"Default Title","offer_id":56144275964244,"sku":"ISP0004-S","price":3180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/family-ISP0009-ISP0004-S-1.png?v=1781708460"},{"product_id":"integrel-montage-support-yanmar-4jh5e-production-energie","title":"mounting bracket - YANMAR 4JH5E","description":"\u003cp\u003e\n    The \u003cstrong\u003eIntegrel mounting bracket for YANMAR 4JH5E\u003c\/strong\u003e is an essential component designed for integrating Integrel’s E-Power energy generation system with the Yanmar 4JH5E marine diesel engine. This custom bracket converts the propulsion engine into a high-efficiency electrical power solution capable of replacing a traditional generator.\n\u003c\/p\u003e\n\u003ch3\u003eIntegrel E-Power system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Developed by Integrel Solutions, this engine mount is specifically designed for the Yanmar 4JH5E, a robust 4-stroke, 4-cylinder in-line marine diesel engine. The E-Power system uses the engine’s power take-off (PTO) to convert excess power into 48-volt electrical energy. It can generate up to 9 kW in a single configuration (E-Power 9 SE) or 18 kW in a dual configuration (E-Power 18 DE).\n\u003c\/p\u003e\n\u003ch3\u003eAdvantages and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This mounting bracket ensures correct installation and safe operation of the E-Power system with the Yanmar engine. The generated energy is stored in a 48V battery, providing an alternative to conventional generators and delivering fuel savings of approximately 25%. The E-Power system operates fully automatically. The Integrel controller connects directly to the Yanmar engine’s J1939 diagnostic port. Integrel’s engineering includes engine specification review and load testing to ensure compatibility and prevent engine issues, with a two-year warranty on engine replacement.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":56144277864788,"sku":"ISP0005","price":3180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/family-ISP0009-ISP0005-1.png?v=1781708487"},{"product_id":"integrel-montage-support-volvo-d2-40-e-power-production-energie","title":"mounting bracket - VOLVO D2-40","description":"\u003cp\u003e\n    The \u003cstrong\u003eIntegrel mounting bracket for VOLVO D2-40\u003c\/strong\u003e (reference ISP0006) is an essential component designed to integrate Integrel’s E-Power energy generation system with Volvo Penta D2-40 marine engines. This custom bracket enables the D2-40 engine, rated at 29.1 kW (39.6 hp), to operate as a 48V onboard generator producing up to 9 kW.\n\u003c\/p\u003e\n\n\u003ch3\u003eE-Power system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Integrating the E-Power system via this bracket optimizes onboard energy generation. The E-Power system consists of an engine-mounted generator (OEG), two intelligent controllers configured to synchronize the engine and battery system, an Integrel display for engine and battery data visualization, and a Smart Switch for energy and data transfer. The system is designed for automatic management of production, storage, conversion, and distribution of electrical energy.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvantages and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Integrel mounting bracket leverages the capabilities of the Volvo D2-40 engine for efficient energy production. The E-Power system generates 8 kW of power at 2000 RPM, contributing to improved propulsion engine efficiency and potentially reducing vessel fuel consumption by up to 25%.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and design\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for direct installation, the engine bracket mounting kit and \"plug and play\" connections simplify integration. The E-Power system is air-cooled and requires no hull penetrations, valves, fuel systems, exhaust, or additional cooling systems. The entire system is internally tested for performance.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":56144279175508,"sku":"ISP0006","price":3180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/family-ISP0009-ISP0006-1.png?v=1781708515"},{"product_id":"integrel-montage-support-volvo-d2-50-60-75-generateur","title":"mounting bracket - VOLVO D2-50\/60\/75","description":"\u003cp\u003e\n    The \u003cstrong\u003eIntegrel ISP0007-S mounting bracket\u003c\/strong\u003e is a critical component of the Integrel E-power system, specifically designed for integrating the On Engine Generator (OEG) on Volvo D2-50\/60\/75 engines. This part ensures precise and secure attachment of the Integrel E-power generator to the front of the engine, enabling 48V power generation.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration with the Integrel E-power system\u003c\/h3\u003e\n\u003cp\u003e\n    This bracket is a crucial mechanical interface that ensures the E-power OEG generator operates in harmony with the engine and battery system. It integrates into an architecture comprising the E-power OEG generator, the intelligent controller (which manages performance and prevents engine overload), the Integrel E-power display for data visualization, and the Smart Switch which carries power and data. The complete system is designed for reduced maintenance.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The bracket is internally tested to guarantee optimal compatibility and functionality with Volvo D2-50\/60\/75 engine models. This solution allows owners of these engines to integrate Integrel’s 48V power generation technology, providing an electrical power source for onboard equipment. The Integrel E-power system is also compatible with other engine brands such as Yanmar, Nanni, Beta, and Vetus, via adapted brackets.","brand":"Integrel","offers":[{"title":"Default Title","offer_id":56144280486228,"sku":"ISP0007-S","price":3180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/family-ISP18DE007-ISP0007-S-1.png?v=1781708542"},{"product_id":"integrel-montage-support-yanmar-4jh4-hte","title":"mounting bracket - YANMAR 4JH4-HTE","description":"\u003cp\u003e\n    Specifically designed for the Yanmar 4JH4-HTE marine diesel engine, the \u003cstrong\u003eIntegrel ISP0033 mounting bracket\u003c\/strong\u003e is a key component of the E-Power energy generation system. It ensures the physical and functional integration of the Integrel E-Power (OEG) alternator with the propulsion engine, enabling efficient 48V electrical power generation. This bracket is essential for utilizing the surplus capacity of the Yanmar 4JH4-HTE, a 4-stroke, 4-cylinder inline, turbocharged, water-cooled diesel engine delivering a maximum power output of 80.9 kW (110 mhp) at 3200 rpm.\n\u003c\/p\u003e\n\n\u003ch3\u003eE-Power system integration and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Integrel ISP0033 mounting bracket allows the E-Power system to generate up to 9 kW of electrical power in single configuration and up to 18 kW in dual configuration by utilizing the power take-off (PTO) of the Yanmar 4JH4-HTE engine. This 48V architecture enables high battery charge rates, reducing reliance on conventional generators. The Integrel system is designed for automatic operation, managing power generation, storage, conversion, and distribution without manual intervention.\n\u003c\/p\u003e\n\n\u003ch3\u003eOperational benefits and maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    Thanks to the facilitated integration provided by this bracket, the E-Power system contributes to a reduction in the vessel's fuel consumption by up to 25% by optimizing the use of the main engine's power. It offers a quieter power generation solution that requires less maintenance than a standalone generator, with a recommended belt change every 500 hours. The system is fully bench-tested to ensure compatibility and reliability with the Yanmar 4JH4-HTE engine.\n\u003c\/p\u003e","brand":"Integrel","offers":[{"title":"Default Title","offer_id":56144281862484,"sku":"ISP0033","price":3180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/family-ISP0009-ISP0033-1.png?v=1781708571"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/Integrel-logo.png?v=1772522896","url":"https:\/\/skysat.fr\/en-us\/collections\/integrel.oembed","provider":"Skysat","version":"1.0","type":"link"}