{"title":"Radars","description":"\u003ch2\u003e Radar: See beyond the horizon, navigate safely\u003c\/h2\u003e\n\n\n \u003cp\u003eRadar is an essential tool for maritime safety, enabling the detection of obstacles and other vessels, day and night, in all weather conditions. At Skysat, we understand the importance of reliable and high-performance radar for safe navigation. We offer you our expertise gained in offshore racing to guide you toward the model best suited to your needs.\u003c\/p\u003e\n\n\n\u003ch2\u003e choosing the right radar for your boat\u003c\/h2\u003e\n\n\n\u003cp\u003e Selecting a radar system suited to your boat and navigation plans is essential. Several factors must be considered, including the size of your boat, your usual navigation areas, and the type of information you need. We help you understand the different technologies and features to make an informed choice.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eDome radars:\u003c\/strong\u003e Compact and affordable, they are perfectly suited to small pleasure craft and offer sufficient range for coastal navigation.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eOpen-antenna radars:\u003c\/strong\u003e More powerful and offering better resolution, they are recommended for larger boats and offshore navigation. They allow for more precise detection of long-range targets.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCHIRP pulse compression radars:\u003c\/strong\u003e This modern technology offers superior range and resolution compared to traditional radars, enabling finer detection of even small targets and better distinction of echoes.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAdvanced features:\u003c\/strong\u003e MARPA target tracking, map overlay, collision alarms... All these options improve safety and facilitate navigation.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e integrating radar into your electronic system\u003c\/h2\u003e\n\n\n \u003cp\u003eA high-performance radar is not enough; its integration within your electronic system is essential for optimal use. Compatibility with other instruments (chart plotter, AIS, etc.) and proper configuration are key elements to ensure smooth and intuitive navigation.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eNMEA 2000 connectivity:\u003c\/strong\u003e Ensures seamless communication of radar data with other compatible instruments, enabling the display of radar information on your chartplotter.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCompatibility with multifunction displays:\u003c\/strong\u003e Check the compatibility of your radar with your multifunction display for optimal information display and ergonomic integration.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAIS Interfacing:\u003c\/strong\u003e Overlaying AIS targets onto the radar image allows for rapid identification of surrounding vessels and a better assessment of collision risks.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eGain and anti-clutter configuration:\u003c\/strong\u003e Precise configuration of these parameters is crucial to optimize target detection and reduce background noise on the radar screen.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e points of attention and constraints\u003c\/h2\u003e\n\n\n\u003cp\u003e Installing and configuring a radar system can be complex and requires some expertise. It is crucial to follow the manufacturer's instructions and ensure the equipment is compatible with the rest of your electronic system. Incorrect configuration can lead to degraded performance and compromise safety.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePower supply:\u003c\/strong\u003e Ensure that your electrical installation is capable of supplying the necessary power to the radar, especially for open-antenna models.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eAntenna Positioning:\u003c\/strong\u003e The positioning of the radar antenna is crucial to avoid interference and optimize range. Avoid obstacles (masts, guy wires) that could block the radar beam.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGrounding:\u003c\/strong\u003e Proper grounding is essential to protect the radar from overvoltages and ensure optimal operation.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSoftware updates:\u003c\/strong\u003e It is important to keep your radar up to date with the latest software versions to benefit from bug fixes and performance improvements.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cstrong\u003eSkysat's advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Before investing in a radar system, clearly define your needs and navigation program. Don't hesitate to contact us for personalized advice and technical assistance with the installation and configuration of your radar.\u003c\/p\u003e","products":[{"product_id":"b-g-radar-halo20-radome-compression-impulsion-48mn","title":"HALO20 Radar","description":"\u003cp\u003e \nThe B\u0026amp;G HALO20 dome radar is a compact 20-inch solution incorporating pulse compression technology. Designed for sailboats and smaller vessels, it uses 10W of transmit power to provide clear and accurate detection up to a maximum range of 24 nautical miles. Its InstantOn™ technology ensures immediate availability from low-power standby mode, eliminating the warm-up time of traditional magnetron radars.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Performance and detection modes\u003c\/h3\u003e\n\n\u003cp\u003e \nThe HALO20 offers short-range detection from 50 meters, essential for navigation in congested areas. The rotation speed is fixed at 24 RPM. The beam has a width of 4.9° horizontally and 25° vertically. Several operating modes are available to optimize the display according to conditions: Port, Offshore, and Weather. MARPA target tracking allows simultaneous monitoring of up to 10 selected collision threats. Customizable guard zones can also be configured to trigger alarms.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Technical specifications and product range positioning\u003c\/h3\u003e\n\n\u003cp\u003e \nWith a diameter of 510 mm and a height of 223 mm, the radome weighs 5.9 kg. It is IPX6 waterproof certified and operates on a 10.5 to 31.2V DC power supply, making it compatible with both 12V and 24V systems. Power consumption is 18W in typical operation and 20W at maximum. The HALO20 is the entry-level model in the B\u0026amp;G dome radar range. Unlike the higher-end HALO20+ model, it does not feature VelocityTrack™ Doppler technology, Dual Range operation, or accelerated rotation speed of 60 RPM.\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723768521044,"sku":"000-14540-001","price":1906.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_0f64dc4d-508e-4290-a1dd-3ff04a29a54f.jpg?v=1772549188"},{"product_id":"b-g-radar-halo20-plus-dome-solid-state-48mn","title":"HALO20+ Radar","description":"\u003cp\u003e \nThe B\u0026amp;G HALO20+ dome radar is a compact 20-inch (510 mm) solution that utilizes pulse compression technology to provide accurate short-, medium-, and long-range detection up to 36 nautical miles. Designed for comprehensive situational awareness, it incorporates Doppler VelocityTrack™ technology for collision avoidance and can track up to 10 MARPA targets (20 in dual-range mode). Positioned above the HALO20 radar, the HALO20+ is distinguished by its ultra-fast 60 rpm rotation speed at short range and the addition of Doppler technology.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Performance at 60 rpm and dual range\u003c\/h3\u003e\n\n\u003cp\u003e \nThe HALO20+ radar offers a 60 RPM rotation for ranges up to 1.5 nautical miles, providing near-instantaneous updates essential for collision avoidance with fast-moving targets. Pulse compression technology with beam refinement ensures optimal detection across all range scales. The Dual Range function allows simultaneous monitoring of two different range scales, for example, to monitor a distant weather cell while keeping an eye on nearby collision hazards. The radar is operational within seconds from a complete shutdown thanks to InstantOn™ technology and instantly resumes from low-power sleep mode.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Integrated VelocityTrack™ Doppler Technology\u003c\/h3\u003e\n\n\u003cp\u003e \nVelocityTrack™ technology provides instant visual feedback on target movement relative to your vessel. A simple color-coded system identifies approaching (highlighted) and receding targets, enhancing situational awareness and reducing the risk of collision. The HALO20+ radar automatically scans every target within range, eliminating the need for manual target selection. Multiple operating modes are available (Harbour, Offshore, Weather, Birds) to adjust signal processing according to navigational conditions.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Technical specifications of the HALO20+\u003c\/h3\u003e\n\n\u003cp\u003e \nThe 510 mm diameter and 223 mm high radome weighs 5.9 kg. It is powered by a 12\/24V DC system (10.5 - 31.2V DC) with a typical power consumption of 20W and a maximum of 29W. The detection range extends from 50 meters to 36 nautical miles. The beamwidth is 4.9° horizontally (2.5° with target separation) and 25° vertically. It is IPX6 rated for water resistance, and the operating temperature range is -25°C to +55°C. The package includes the radar dome, a 20-meter cable, a 1.5-meter RJ45 to 5-pin Ethernet adapter, and mounting hardware.\n\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723768684884,"sku":"000-14539-001","price":2256.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5c9add7c-49cf-486c-b80c-07e3c9a9b0ad.jpg?v=1772138689"},{"product_id":"b-g-radar-halo24-doppler-solid-state","title":"HALO24 Radar","description":"\u003cp\u003e\n    The \u003cstrong\u003eRadar HALO24\u003c\/strong\u003e from \u003cstrong\u003eB\u0026G\u003c\/strong\u003e is a 24-inch pulse-compression radome designed to provide unmatched target detection at short, medium, and long range. Featuring Doppler VelocityTrack™ technology, dual-range simultaneous operation, and a rotation speed of up to 60 RPM at short range, this compact and lightweight radar enhances situational awareness and collision avoidance. It represents a significant advancement over traditional magnetron radars, offering instant-on operation and low power consumption.\n\u003c\/p\u003e\n\n\u003ch3\u003eDoppler VelocityTrack™ and pulse-compression technology\u003c\/h3\u003e\n\u003cp\u003e\n    Doppler VelocityTrack™ technology provides instant visual feedback on radar target motion. A simple color-coding system identifies potential hazards, highlighting targets approaching while reducing visibility of those moving away. The \u003cstrong\u003eRadar HALO24\u003c\/strong\u003e automatically processes every visible target, eliminating the need for manual selection. Pulse-compression technology ensures optimal detection at all ranges, while beam sharpening improves separation between small or distant targets.\n\u003c\/p\u003e\n\n\u003ch3\u003eOperational performance\u003c\/h3\u003e\n\u003cp\u003e\n    With a rotation speed of 60 RPM for ranges up to 1.5 nautical miles, the \u003cstrong\u003eRadar HALO24\u003c\/strong\u003e delivers near real-time data, essential for avoiding collisions with fast-moving targets. The dual-range function allows simultaneous monitoring of two distinct distance scales from a single radome, for example keeping an eye on a distant weather cell while monitoring nearby fishing pots. The MARPA target-tracking feature can track up to 10 selected targets (or 20 in dual-range mode). Preconfigured modes (Harbor, Large, Weather, Birds) adjust settings to ensure optimal visibility in all conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eRadar HALO24 technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eRadar HALO24\u003c\/strong\u003e offers a maximum range of 48 nautical miles. Its peak power is 25 W, powered by a 12\/24 V DC system. Typical power consumption is 20 W, peaking at 29 W, and 3.9 W in standby. The horizontal beam width is 3.9° nominal (2° with high target separation) and 22° for the vertical beam. The radome measures 610 mm in diameter and 225 mm in height, weighing 6.75 kg without the cable. The unit is IPX6 waterproof and operates in a temperature range from -25°C to +55°C. Connectivity to the B\u0026G multifunction display network is via Ethernet.\n\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723768914260,"sku":"000-14538-001","price":2481.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_4ec9d5a3-42da-419b-9910-32bf8e6dcfde.jpg?v=1772550111"},{"product_id":"simrad-radar-halo20","title":"HALO20 Radar","description":"\u003cp\u003e\n    Designed for small sports boats and dayboats, the \u003cstrong\u003eSIMRAD HALO20\u003c\/strong\u003e radar (part number 000-14537-001) is a compact detection solution using pulse compression technology. This 20-inch radome (510 mm diameter x 223 mm height) provides a maximum range of 24 nautical miles and a minimum range of 50 meters, ensuring precise target detection with minimal footprint.\n\u003c\/p\u003e\n\n\u003ch3\u003ePulse compression technology and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO20 features pulse compression technology, combining short- and long-range detection with sharp target definition. Its peak transmitter output power is 25 W, operating in the X-band (9.4 to 9.5 GHz). Unlike traditional magnetron radars, it uses InstantOn™ technology, enabling immediate activation from low-power standby mode (3.9 W standard at 13.8 V DC). In operation, power consumption ranges from 17 to 29 W depending on range and mode. The antenna rotation speed is 24 RPM, with a nominal horizontal beam width of 3.9° (at -3 dB).\n\u003c\/p\u003e\n\n\u003ch3\u003eOperating modes and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO20 radar offers dedicated modes for simplified use: Harbour (harbor), Offshore, and Weather, optimizing signal processing for different conditions. It also includes MARPA target tracking, capable of monitoring up to 10 collision threats. Its 100Base-T Ethernet interface allows easy integration with compatible navigation systems. With IPX6 waterproofing and an operating temperature range of -25 °C to +55 °C, it is built to withstand marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning within the SIMRAD HALO range\u003c\/h3\u003e\n\u003cp\u003e\n    The SIMRAD HALO20 is positioned as the entry-level option in the HALO series, delivering solid-state technology benefits in a compact format. Compared to the HALO20+ or HALO24, it offers a public safety distance of 0.0 meters, which is an advantage for installation on smaller vessels where space is limited. For example, the HALO24 has a maximum allowable antenna gain of 23.5 dBi compared to 22.5 dBi for the HALO20, indicating slightly superior performance for the more advanced models in the range.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723786576212,"sku":"000-14537-001","price":1867.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c266f0fc-a557-4081-bb22-afcba5db0cb5.jpg?v=1779462686"},{"product_id":"raymarine-antenne-radar-quantum-2-q24d-doppler-sans-cable","title":"Quantum 2 Q24D Doppler Radar Antenna without power or data cable","description":"\u003cp\u003e\n    The Raymarine \u003cstrong\u003eQuantum 2 Q24D Doppler radar antenna\u003c\/strong\u003e (reference E70498) is an advanced marine detection solution. This radome unit, manufactured in Hungary, integrates Raymarine’s CHIRP pulse compression and Doppler technology for precise target identification. Designed for 12\/24VDC power, it offers versatile network connectivity options via WiFi and Ethernet. Weighing 5.6 kg, the antenna is rated IPX6 for water resistance, ensuring reliable performance in demanding marine environments. This model is supplied without power or data cables, allowing for custom installation configurations.\n\u003c\/p\u003e\n\n\u003ch3\u003eDoppler Technology and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eQuantum 2 Q24D Doppler radar antenna\u003c\/strong\u003e stands out for its ability to use the Doppler effect to differentiate moving targets from stationary ones. Approaching targets are displayed in red, while receding targets appear in green, enhancing situational awareness and safety. With an effective range of 0.0625 to 24 nautical miles, a maximum output power of 20W, and a rotation speed of 24 RPM, this solid-state radar delivers fast detection and clear images. Its 4.9° horizontal and 20° vertical beamwidth ensures detailed coverage. Raymarine’s CHIRP pulse compression technology provides excellent target separation (6 meters) and simultaneous short- and long-range detection, outperforming traditional magnetron radars in clarity and lower power consumption.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Comparative Advantages\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eRaymarine Quantum 2 Q24D Doppler\u003c\/strong\u003e integrates seamlessly with compatible Raymarine multifunction displays (Axiom, eS, gS, a, c, and e series running Lighthouse II\/3). Compared to the previous Quantum 1 generation, Quantum 2 adds Doppler target tracking, a key improvement for navigation and monitoring. Unlike magnetron radars, its solid-state design ensures instant startup, reduced power consumption, and no harmful emissions—particularly beneficial for sailboats and low-power vessels. Compared to competitors such as the Garmin Fantom or B\u0026G Halo20+\/24, the Quantum 2 Q24D offers a high-performance alternative within the Raymarine ecosystem, emphasizing installation simplicity (via WiFi connectivity) and clear Doppler navigation data. Its extended operating temperature range of -10°C to +55°C ensures robustness across varied conditions.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723789197652,"sku":"E70498","price":2165.08,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506574356820-1000.jpg?v=1783598274"},{"product_id":"furuno-radar-drs4w-radome-4kw-wifi","title":"Radar DRS4W Radome 49cm, 4kW WiFi 36MN 12-24V","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO DRS4W\u003c\/strong\u003e radar is a compact 4 kW radome designed for wireless navigation, offering a standalone detection solution. It stands out for its ability to directly broadcast radar images to iOS devices such as iPads and iPhones, via its integrated WiFi connectivity on the 2.4 GHz band.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and performance\u003c\/h3\u003e\n\u003cp\u003e\n    With an output power of 4 kW and a radar frequency of 9410 ± 30 MHz, the DRS4W is listed in the Furuno catalog with a range of 36 NM; in practice, the effective detection range is around 24 nautical miles depending on target size and conditions, with display scales ranging from 0.125 to 24 NM. Its Ø488 mm (19-inch) radome integrates a 19-inch antenna, providing a horizontal beam width of 7.2° and vertical beam width of 25°. The system is powered by 12–24 VDC, with a maximum consumption of 2.1 A at 12 V or 1.0 A at 24 V, equating to an electrical consumption of 24 to 25.2 W.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and user interface\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eDRS4W\u003c\/strong\u003e radar allows simultaneous connection of two iOS devices via its IEEE 802.11 b\/g\/n wireless network. The nominal wireless connectivity range is 10 meters (or 5 meters, including 2 meters through fiberglass or wood). The dedicated \"Marine Radar\" application, available on the App Store, features a user interface compatible with iOS 6.1.3 or later (iPhone 5, 5c, 5s; iPad 2, 3, 4, mini). It includes radar display functions, including a guard zone alarm and menus for image adjustment, color, and radar settings.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the DRS4W is simplified thanks to its \"Plug and Play\" design, requiring only a connection to the power cable. The WiFi code needed for connection is provided in the packaging. Its weight of 5.7 kg and dimensions of 488 mm in diameter and 220 mm in height facilitate integration. The device is designed to operate within a temperature range of -25°C to +55°C and has an IP26 protection rating, protecting it against powerful water jets and dust. It is certified FCC Class B, Industry Canada (RSS 210), and IEC 60945 4th edition (vibration).\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":53723834450260,"sku":"IMD03439004","price":1313.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_bf5f8e65-7c5a-45c2-84ba-89986f23bd2f.jpg?v=1780917296"},{"product_id":"bg-licence-radar-overlap-adrena-ll1-v20","title":"Adrena LL1 radar overlay licence","description":"\u003cp\u003eThe B\u0026amp;G Adrena LL1 radar overlap license is a software activation key specifically designed for demanding navigators and offshore racing professionals. It allows for the real-time integration and overlay of your B\u0026amp;G or Simrad radar's raw image directly onto the chart interface of the Adrena V20 navigation software. This data fusion provides optimal situational awareness by combining charts, AIS targets, and radar echoes on a single screen.\u003c\/p\u003e\n\u003ch3\u003eTactical Integration and Performance Analysis\u003c\/h3\u003e\n\u003cp\u003eFor a racing navigator, the ability to visualize squalls, wind shifts, or competitors without AIS transponders directly on the tactical chart provides a decisive strategic advantage. The LL1 license centralizes critical information on the onboard computer, eliminating the need to scrutinize a separate multifunction display. Unlike integrated systems from competing brands like Garmin or Raymarine that often favor a closed ecosystem, this solution unlocks the potential of B\u0026amp;G radars by pairing them with the most advanced routing software on the market.\u003c\/p\u003e\n\u003ch3\u003eNetwork Configuration and Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis software key is exclusively compatible with Adrena V20. Its activation requires the B\u0026amp;G radar dome or scanner to be properly interfaced via the onboard Ethernet network with the computer running Adrena software. This is a dematerialized product, ensuring instant update of your navigation system's capabilities without adding physical hardware.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":54023357530452,"sku":"000-10173-001","price":1395.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15044009001300-1000.jpg?v=1783618233"},{"product_id":"garmin-antenne-radar-gmr-xhd2-6-pieds","title":"Garmin GMR xHD2 6' radar antenna","description":"\u003cp\u003e\n    The Garmin GMR xHD2 6' (1.82 m) radar antenna is a key component of the GMR xHD2 open array radar systems. Designed for navigators requiring detailed detection and precise target separation, this antenna provides a 1.1-degree horizontal beam width, ensuring superior angular resolution to distinguish close objects. It stands as a high-performance solution within the Garmin range, offering extended detection capabilities compared to compact radomes.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical performance and advanced detection\u003c\/h3\u003e\n\u003cp\u003e\n    This antenna delivers a maximum range of 72 nautical miles and a minimum range of 20 meters, suitable for both coastal and offshore navigation. It supports selectable rotation speeds of 24 and 48 rpm for rapid target refresh. With an 8-bit color depth, imagery is displayed with enhanced clarity on compatible chartplotters. The antenna features a 29 dB gain, optimized to capture weak echoes even in challenging weather conditions. It is designed to operate with an input voltage of 10 to 32 VDC and has an IPX6 waterproof rating, protecting it against heavy seas.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated features and system compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The GMR xHD2 6' antenna integrates with GMR xHD2 pedestals (available in 4 kW, 6 kW, or 12 kW versions) and is compatible with Garmin chartplotters, including the GPSMAP 7400\/7600\/8000 series for diagnostics and software updates. It supports features such as dual-range mode, which displays simultaneous close-up and long-range views, and radar overlay on charts (requires an optional heading sensor). \"Bird Mode\" for bird detection and MARPA target tracking (up to 10 or 30 targets depending on the source and requiring a heading sensor) enhance situational awareness. Dynamic Auto Gain and Sea Filter filters automatically adjust parameters for optimal performance in various marine conditions. The \"Echo Trails\" function allows quick identification of moving targets. The antenna is designed for easy installation and silent operation, with an operating temperature range of -15°C to 70°C.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55859042582868,"sku":"010-01333-04","price":1191.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_1e2b44a1-289c-413d-ac20-ffcc56b22688.jpg?v=1779186339"},{"product_id":"garmin-piedestal-radar-gmr-fantom-5x","title":"Garmin GMR Fantom 5x radar pedestal, upper part","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GMR Fantom 5x radar pedestal\u003c\/strong\u003e (part number 010-01364-10) is the essential upper component for installing a Garmin GMR Fantom 5x open array radar system. Designed for robustness and performance, this component provides mechanical support for the antenna and integrates electronic systems, ensuring reliable and stable radar performance at sea.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and installation of the Garmin GMR Fantom 5x pedestal\u003c\/h3\u003e\n\u003cp\u003e\n    This pedestal is supplied with all necessary mounting hardware: a mounting template for precise positioning, petroleum primer, plastic shoulder washers, flat washers, locking washers, and hex nuts. Installation requires a 15 mm (19\/32 in) hole for mounting bolts and, if needed, a 32 mm (1 1\/4 in) cable pass-through for power and network cables. Hex nuts on threaded rods must be tightened to 14.7 N·m (11 lbf·ft) for secure fastening. The antenna is then secured to the pedestal using hex bolts with a tightening torque of 7.9 N·m (6 lbf·ft).\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin GMR Fantom 5x radar pedestal\u003c\/strong\u003e integrates with Garmin BlueNet™ or Garmin Marine Network. It is designed for 10–32 V DC power supply, potentially via a specific Garmin voltage converter (not compatible with older or third-party models). Grounding must connect to a marine ground using a 3.31 mm² (12 AWG) copper wire. Mounting considerations are critical to avoid interference and ensure safety: the radar must be installed high, above the keel line, with minimal beam obstruction, and away from heat sources, magnetic compasses (no safety distance provided), transmission equipment (minimum 1 m), and SSB radios (minimum 2 m).\n\u003c\/p\u003e\n\u003ch3\u003ePosition in the Garmin lineup\u003c\/h3\u003e\n\u003cp\u003e\n    As part of the GMR Fantom 5x system, this pedestal serves as a fundamental component of Garmin open array radars. Unlike compact dome radars such as the GMR Fantom 18 or 24, open array systems like the GMR Fantom 5x typically offer greater range and better target separation—key advantages for offshore navigation and long-range obstacle detection. This pedestal provides the mechanical base that enables the open array antenna to operate with maximum efficiency, ensuring precise rotation and signal transmission, which is essential to fully leverage the advanced detection and tracking capabilities of the Fantom series.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55859044745556,"sku":"010-01364-10","price":4902.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_8bb53f43-3e94-48ab-a46e-f34b4211593b.jpg?v=1779186340"},{"product_id":"garmin-piedestal-radar-gmr-fantom-12x-partie-superieure","title":"GMR Fantom 12x radar pedestal, upper assembly","description":"\u003cp\u003e\n    The GMR Fantom 12x radar pedestal is the upper assembly of the Garmin GMR Fantom open array radar series, designed to house the main electronics and support the antenna. This component is critical for the proper operation and structural integrity of the radar system onboard. The GMR Fantom series, known for advanced technologies such as MotionScope and pulse compression, requires robust mounting and precise electrical connections, which this pedestal ensures. It is a replacement part for existing GMR Fantom 12x radar systems, maintaining the high-end navigation performance of Garmin, similar to other components in the Fantom range such as the GMR Fantom 4 or 6-foot antennas. Compared to enclosed radomes, the open array architecture, of which this pedestal is the support, generally offers better resolution and range, crucial for long-distance detection and target discrimination in complex marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the GMR Fantom 12x pedestal requires strict adherence to mounting considerations to ensure optimal performance and safety. The pedestal must be positioned above the vessel’s keel line, with minimal obstructions to the radar beam, and at a safe distance from personnel to avoid exposure to harmful radiofrequency (RF) emissions and electromagnetic interference sources. The assembly is mounted on a flat, robust surface, parallel to the vessel’s waterline. Specific tools are required, including a Phillips #2 screwdriver, a 6 mm hex key, a drill with 15 mm (19\/32 in) and 32 mm (1 1\/4 in) drill bits (optional for cable routing), a 17 mm (21\/32 in) wrench, and a torque wrench. Tightening must be precise: 14.7 N·m (11 lbf·ft) to secure the pedestal to the surface and 7.9 N·m (6 lbf·ft) to secure the antenna to the pedestal, to prevent damage.\n\u003c\/p\u003e\n\n\u003ch3\u003eElectrical Requirements and Grounding\u003c\/h3\u003e\n\u003cp\u003e\n    The electrical connection of the GMR Fantom 12x pedestal is critical for its operational reliability. It requires a 10 to 32 V DC power supply. The radar’s power cable includes a 15 A fuse holder that is essential and must never be removed. For installations requiring a voltage converter (note: only converters included or purchased from Garmin are compatible; older models or third-party units must not be reused), additional protection with a 30 A fuse is required between the converter and the vessel’s battery. Proper grounding of the pedestal (and the voltage converter, if applicable) is mandatory, using a 3.31 mm² (12 AWG) copper wire (not included) connected to a marine ground and the pedestal’s ground connector. Marine sealant must be applied around cable entries to ensure a watertight installation, protecting the internal electronics from the corrosive marine environment.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55859045826900,"sku":"010-01364-20","price":5944.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5a5a95d6-8336-4d0b-931f-941e9f784466.jpg?v=1779186343"},{"product_id":"garmin-piedestal-radar-gmr-fantom-254-256","title":"Garmin GMR Fantom 254\/256 radar pedestal","description":"\u003cp\u003e\n    The Garmin GMR Fantom 254\/256 radar pedestal, part number 010-01364-30, serves as the structural and electrical foundation for the open-array radar antennas in the GMR Fantom 254 and GMR Fantom 256 series. Designed for integration with Garmin multifunction displays (MFD) from the GPSMAP 7x2, 9x2, 10x2, 12x2, 7400, 7600, 8000, 8200, 8400, and 8600 series, this pedestal supports solid-state radars with a power output of 250 watts and pulse compression technology. It provides detection ranges from 6 meters to 96 nautical miles and rotation speeds of 24 or 48 rpm, with the higher speed available in single-range mode at settings below 12 NM and MotionScope disabled.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The GMR Fantom 254\/256 pedestal measures 42.1 x 36.4 x 27.1 cm and weighs 15.7 kg. It is rated for maximum wind loads of 80 knots and has an IPX6 waterproof rating. Power input is 10–32 V DC. The pedestal accommodates the installation of 4-foot (Fantom 254) or 6-foot (Fantom 256) open-array antennas, which differ in horizontal beam width: 1.8 degrees for the Fantom 254 and 1.25 degrees for the Fantom 256. The vertical beam width is 23 degrees for both models. The system includes advanced features such as MotionScope target detection, automatic MARPA tracking for up to 30 targets, dynamic sea and gain clutter suppression, echo trails display, and radar overlay on charts.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and safety considerations\u003c\/h3\u003e\n\u003cp\u003e\n    The pedestal must be mounted on a flat, rigid surface parallel to the vessel’s waterline, away from heat sources, strong electromagnetic fields, and human traffic areas. The radar beam extends 11.5 degrees above and below the radiating element. A clearance of more than 2 meters is recommended between the radar beam path and other electronic equipment or cables. Minimum distances of 1 meter from transmission equipment and radio signal cables, and 2 meters from HF radios (SSB), are required. The power wiring is protected by a 15 A fuse, and an additional 30 A fuse is required if a voltage converter is used. Grounding is achieved via a 3.31 mm² (12 AWG) copper wire connected to a sea ground. Specific torque values must be observed: 14.7 N·m (11 lbf·ft) for pedestal mounting and 7.9 N·m (6 lbf·ft) for antenna installation, ensuring durability and safety. Applying marine sealant is essential to ensure watertightness at cable penetrations.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55859047006548,"sku":"010-01364-30","price":8677.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_005e70e4-5b0d-4898-94ed-567df7f286fb.jpg?v=1779186346"},{"product_id":"garmin-antenne-radar-gmr-chirp-2104","title":"GMR CHIRP 2104 radar antenna, upper part","description":"\u003cp\u003e\n    The \u003cstrong\u003eGMR CHIRP 2104 radar antenna\u003c\/strong\u003e from Garmin, identified by SKU 010-01365-00, is the essential upper component of the \u003cstrong\u003eGMR Fantom™ Open Array Series\u003c\/strong\u003e open-array radar systems. Specifically designed for these platforms, it serves as the primary transmitter\/receiver element, integrating CHIRP technology for improved target detection and higher resolution. This component is critical for owners looking to replace an existing antenna or maintain optimal performance of their Fantom radar system, thereby extending the lifespan and efficiency of their high-end marine installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eCHIRP Technology and Detection Precision\u003c\/h3\u003e\n\u003cp\u003e\n    The CHIRP (Compressed High-Intensity Radiated Pulse) technology embedded in the GMR CHIRP 2104 antenna broadcasts pulses across a range of frequencies, delivering a sharper radar image and better target separation compared to traditional pulse radars. This antenna is the core of the Fantom radar’s detection capability, ensuring resilience and precision essential for navigation. The radar beam has a vertical spread of 11.5° above and 11.5° below the radiating element, enabling effective coverage even on vessels with high bow angles at cruising speed. To optimize performance, the installation angle can be adjusted to direct the beam slightly toward the waterline at rest.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Specific Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The GMR CHIRP 2104 antenna is designed to integrate seamlessly with the GMR Fantom series pedestal. It requires precise alignment of the waveguide and tightening of captive hex bolts to a specified torque of 7.9 N·m (6 lbf·ft) to ensure secure attachment and system integrity. Garmin recommends installation by a qualified professional to guarantee optimal performance and safety. The pedestal must be mounted on a flat, sturdy surface, parallel to the vessel’s waterline, and at a sufficient height to minimize obstructions and avoid human exposure to the radar beam. Location considerations are critical, including keeping it away from heat sources (exhausts, lights), magnetic compasses (respect safety distance), and other transmitting equipment (minimum 1 m from VHF radios and antennas, 2 m from SSB radios).\n\u003c\/p\u003e\n\n\u003ch3\u003ePower Supply, Grounding, and Safety\u003c\/h3\u003e\n\u003cp\u003e\n    The GMR Fantom radar system to which this antenna connects requires a 10–32 Vdc power supply. Depending on the model, a voltage converter may be required or optional for better wind resistance. The power supply must include an inline 15 A fuse (integrated into the radar power cable) and, if a converter is used, a 30 A fuse between the converter and the battery. Proper grounding of the radar and converter (if applicable) using a 3.31 mm² (12 AWG) copper wire to a water ground is mandatory for safety and proper operation. It is critical to follow all safety instructions, including avoiding direct eye exposure to the antenna while it is transmitting and maintaining the minimum safety distance specified in the product’s technical specifications to prevent radiofrequency (RF) exposure. The device is intended as a navigation aid and contains no user-serviceable parts; servicing must be performed by a Garmin-certified technician, underscoring the importance of professional installation and maintenance.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55859048677716,"sku":"010-01365-00","price":599.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01.jpg?v=1779189968"},{"product_id":"garmin-antenne-radar-gmr-chirp-2106-partie-superieure","title":"Garmin GMR CHIRP 2106 radar antenna, upper part","description":"\u003cp\u003e\n    Designed to integrate with Garmin GMR Fantom CHIRP radar systems, the GMR CHIRP 2106 radar antenna (010-01366-00) is the upper component of a 6-foot open array system. This component is essential for users looking to upgrade or replace the antenna of an existing Fantom radar installation, or for a complete new installation. It is a key element of Garmin’s solid-state radar solutions, known for providing accurate marine detection data.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The 6-foot GMR CHIRP 2106 open array antenna delivers a typical horizontal beam width of 1.25 degrees. This feature enables high-resolution imaging and optimized antenna gain for long-range target detection, outperforming dome radars such as the Garmin GMR 18\/24 xHD or Fantom 18\/24, which have wider beam widths. This design directly contributes to better target separation and a clearer view of the marine environment. As part of the Fantom series, it is designed to leverage CHIRP technology, which maximizes transmitted energy for improved target detection and identification.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Fantom system features\u003c\/h3\u003e\n\u003cp\u003e\n    When paired with a compatible Garmin GMR Fantom CHIRP radar pedestal, the GMR CHIRP 2106 antenna enables access to a suite of advanced features. MotionScope™ technology uses Doppler effect to detect and highlight moving targets, aiding navigation around vessels or weather conditions. Pulse compression ensures high-resolution imaging. Features like automatic gain for birds help locate fish schools, while echo trails display the historical movement of targets. The system supports automatic MARPA target acquisition (up to 30) and uses scan-to-scan attenuation to reduce sea clutter. The complete system offers detection ranges from 20 feet to 96 nautical miles, with rotation speeds of 24 RPM for reduced power consumption and 48 RPM for faster screen updates.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and mounting considerations\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the GMR CHIRP 2106 antenna requires strict adherence to Garmin’s recommendations. The antenna must be mounted on a flat, level surface parallel to the vessel’s waterline and capable of supporting the radar’s weight. It is critical to mount the antenna out of reach of personnel, with the vertical beam above head height, and to respect the minimum safety distance specified to avoid radiofrequency exposure. The radar beam extends vertically 11.5° above and 11.5° below the radiating element. Electrical connection requires a 10 to 32 Vdc power supply, with an inline 15 A fuse and an additional 30 A fuse if a voltage converter is used. Grounding to a water ground via a 3.31 mm² (12 AWG) copper wire is mandatory. Tightening the antenna bolts to the pedestal must be done with a torque of 7.9 N·m (6 lbf·ft) to ensure secure fastening without damaging the hardware.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55859049726292,"sku":"010-01366-00","price":1107.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_44b91e19-627d-461d-9604-94749a004250.jpg?v=1779189968"},{"product_id":"garmin-gpsmap-923xsv-radome-gmr-18-hd3","title":"Pack GPSMAP® 923xsv 9\" + radôme GMR™ 18 HD3","description":"\u003cp\u003e\nLe \u003cstrong\u003eGarmin GPSMAP® 923xsv\u003c\/strong\u003e, livré avec le radôme GMR™ 18 HD3, est un traceur de cartes multifonction conçu pour la navigation marine moderne. Appartenant à la série GPSMAP 9x3, il représente une évolution par rapport aux modèles précédents tels que le GPSMAP 9x2, offrant des fonctionnalités améliorées et une intégration système étendue. Ce combiné permet une surveillance vidéo supérieure grâce à l'intégration de caméras réseau tierces et Garmin, y compris les modèles FLIR M et MD.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntégration vidéo avancée et connectivité réseau\u003c\/h3\u003e\n\u003cp\u003e\nLe GPSMAP 923xsv se distingue par ses capacités d'intégration vidéo. Il permet de visualiser des flux vidéo sur tous les écrans du réseau Garmin Marine et d'afficher plusieurs sources vidéo simultanément sur un même écran combiné. Les utilisateurs bénéficient d'un contrôle tactile intuitif des caméras, incluant le pincement pour zoomer et le glissement pour le panoramique et l'inclinaison, ainsi que la personnalisation des préréglages de position et de zoom. Pour l'intégration d'équipements Ethernet standard comme les caméras réseau ou les commutateurs, l'utilisation d'un coupleur d'isolation PoE Garmin (référence 010-10580-10) est impérative afin de protéger le traceur. Un câble blindé CAT 5e F\/FTP est recommandé pour des performances optimales. Le système supporte jusqu'à cinq sources vidéo en streaming simultané pour une performance réseau optimale.\n\u003c\/p\u003e\n\n\u003ch3\u003eFonctionnalités de suivi et compatibilité\u003c\/h3\u003e\n\u003cp\u003e\nCe traceur de cartes intègre une fonctionnalité d'encodeur vidéo, permettant de partager les entrées vidéo composites sur l'ensemble du réseau. Il assure une détection automatique des caméras FLIR connectées, simplifiant l'installation sans pré-configuration. Le GPSMAP 923xsv offre des options de personnalisation pour les caméras FLIR, telles que la polarité, les schémas de couleurs et les réglages de scène (nuit, jour, homme à la mer). Les modèles FLIR M-series à double charge utile bénéficient d'une commutation entre vues thermique et visible, tandis que les MD-series se limitent à l'imagerie thermique. Les caméras FLIR à double charge utile peuvent acheminer deux flux vidéo (V\/IR commutable et IR-only) vers le traceur, offrant une flexibilité accrue.\n\u003c\/p\u003e\n\n\u003ch3\u003eCapacités de suivi de cible et d'intégration\u003c\/h3\u003e\n\u003cp\u003e\nLe GPSMAP 923xsv prend en charge des fonctions de suivi de caméra avancées, notamment le verrouillage de compas (Compass Lock), le verrouillage de navire (Vessel Lock) et le suivi de cibles AIS, MARPA ou de waypoints (slew-to-cue). Ces fonctions nécessitent l'intégration de capteurs spécifiques tels qu'une caméra IP FLIR compatible, une antenne GPS et un capteur de cap (idéalement 9 axes pour une précision accrue). Pour le suivi AIS et MARPA, un récepteur AIS et un dispositif radar compatible sont également requis. L'ensemble est complété par le radôme GMR 18 HD3 inclus, offrant des capacités radar essentielles pour la détection et la sécurité en mer. Le positionnement de la série GPSMAP 9x3, comme le 923xsv, le place au-dessus des anciennes séries comme les GPSMAP 7x1, 7400, 7600, 8000, 8200 et 8500 en termes d'intégration vidéo et de modernité d'interface, offrant une solution plus actuelle et optimisée pour les besoins de navigation contemporains.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860321616212,"sku":"010-02366-52","price":2783.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_2642b2ca-ed99-49bc-bf0b-b3905c8a5e57.jpg?v=1779191685"},{"product_id":"garmin-gpsmap-1223xsv-radome-gmr-18-hd3-traceur-radar","title":"Pack GPSMAP® 1223xsv 12\" + radôme GMR™ 18 HD3","description":"\u003cp\u003e\n    Le \u003cstrong\u003eGarmin GPSMAP 1223xsv\u003c\/strong\u003e, associé au radôme \u003cstrong\u003eGMR 18 HD3\u003c\/strong\u003e, constitue une solution de navigation et de surveillance complète pour les embarcations nécessitant des performances fiables. Issu de la série 12x3, ce traceur de cartes multifonction (MFD) s'inscrit dans la gamme professionnelle actuelle de Garmin, offrant une évolution par rapport aux précédentes séries 7x2\/9x2\/12x2 et se positionnant comme une alternative robuste aux modèles plus anciens comme les séries 8000, 8200, 8500, 7x1, 7400 et 7600 en termes de fonctionnalités intégrées.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntégration vidéo avancée et surveillance\u003c\/h3\u003e\n\u003cp\u003e\n    Le \u003cstrong\u003eGPSMAP 1223xsv\u003c\/strong\u003e excelle dans l'intégration de caméras réseau, offrant une surveillance vidéo supérieure sur l'ensemble des écrans du réseau Garmin Marine. Il permet de visualiser plusieurs flux vidéo simultanément sur un écran combiné et offre un contrôle tactile intuitif des caméras, incluant le pincement pour zoomer et le glissement pour le panoramique et l'inclinaison. Des préréglages personnalisables peuvent être stockés pour chaque caméra, gérant la position et le zoom. Pour connecter des équipements Ethernet standard, tels que des caméras ou des commutateurs réseau, l'utilisation d'un coupleur d'isolation PoE Garmin (référence 010-10580-10) est impérative afin de protéger le traceur. Le système est compatible avec les caméras FLIR des séries M et MD, ainsi qu'avec les caméras Garmin GC 14 et GC 200, et intègre une fonction d'encodeur vidéo pour les entrées composites. Pour une performance optimale, Garmin recommande de ne pas diffuser plus de cinq sources vidéo simultanément.\n\u003c\/p\u003e\n\n\u003ch3\u003eFonctionnalités de suivi et de navigation\u003c\/h3\u003e\n\u003cp\u003e\n    Ce traceur de cartes prend en charge des fonctions de suivi de caméra sophistiquées, notamment le verrouillage de cap (Compass Lock), le verrouillage de l'embarcation (Vessel Lock) et le suivi de cibles AIS, MARPA ou de waypoints (slew-to-cue). Ces capacités nécessitent la connexion de capteurs spécifiques via le réseau Garmin Marine ou NMEA 2000, incluant une caméra marine compatible avec le suivi (comme une caméra IP FLIR récente), une antenne GPS et un capteur de cap (idéalement avec des données 9 axes pour le lacet, le tangage et le roulis). Pour le suivi AIS, un récepteur AIS compatible est requis, et pour le suivi MARPA, un dispositif radar compatible est nécessaire, comme le radôme \u003cstrong\u003eGMR 18 HD3\u003c\/strong\u003e inclus dans ce pack. Les modèles FLIR à double charge utile avec sorties vidéo composites V\/IR et IR-only offrent une flexibilité accrue pour la visualisation des flux thermique et visible.\n\u003c\/p\u003e\n\n\u003ch3\u003eConception et installation\u003c\/h3\u003e\n\u003cp\u003e\n    La série \u003cstrong\u003eGPSMAP 12x3\u003c\/strong\u003e est conçue pour une installation encastrée, avec des dimensions optimisées. Un gabarit de montage est fourni pour faciliter une découpe précise du tableau de bord. Pour les mises à niveau depuis des installations existantes, une plaque adaptatrice (non incluse avec le traceur mais disponible séparément) permet de convertir une découpe initialement réalisée pour un \u003cstrong\u003eGPSMAP 12x2\u003c\/strong\u003e afin d'y installer un \u003cstrong\u003eGPSMAP 12x3\u003c\/strong\u003e, simplifiant ainsi le processus de remplacement. Le système garantit une robustesse adaptée à l'environnement marin, avec des avertissements de sécurité standard concernant l'immersion et les plages de température de fonctionnement. Le radôme \u003cstrong\u003eGMR 18 HD3\u003c\/strong\u003e complète cette configuration en fournissant des capacités radar haute définition essentielles pour la sécurité et la navigation.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860326531412,"sku":"010-02367-52","price":3616.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_ce48eba6-7e73-4da8-b1ec-35f97c93195b.jpg?v=1779191758"},{"product_id":"garmin-radome-gmr-fantom-18x-radar-marin","title":"Garmin GMR Fantom™ 18x Radome, White","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GMR Fantom™ 18x radome\u003c\/strong\u003e is an 18-inch pulse-compression radar system designed to deliver superior target detection performance for recreational and fishing vessels. Part of Garmin’s Fantom lineup, it differs from traditional magnetron radars by using solid-state technology, ensuring instant start-up, reduced power consumption, and optimized target detection at both short and long ranges.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced Technology and Network Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This radome integrates Garmin BlueNet™ networking technology, providing fast and reliable connectivity with compatible Garmin BlueNet chartplotters or the Garmin BlueNet 20 switch. For existing systems equipped only with Garmin Marine Network devices, compatibility is maintained using a Garmin Marine Network adapter cable (part number 010-12531-01, if not included). This versatility ensures seamless integration whether upgrading an old system or installing a new setup.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Operational Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the \u003cstrong\u003eGarmin GMR Fantom™ 18x radome\u003c\/strong\u003e requires careful attention to optimize performance and ensure safety. It must be mounted out of reach of personnel, with the horizontal beam above head height, and RF exposure safety distances must be respected. The ideal mounting position is high above the vessel’s keel line, on a flat, rigid surface parallel to the waterline, minimizing obstructions that could create blind spots or false echoes. The radar beam extends vertically 12.5° above and 12.5° below the radiating element, requiring adequate mounting height—especially on rigid roofs—to clear the deck edge. The radome operates on a 10–32 VDC power range and can function in temperatures from -15 to 70°C, demonstrating its robustness for marine environments. It ships with mounting hardware including M8 x 1.25 x 60 threaded rods, flat washers, spring washers, and hex nuts, along with anti-seize compound.\n\u003c\/p\u003e\n\u003ch3\u003eMaintenance and Safety\u003c\/h3\u003e\n\u003cp\u003e\n    Updating the Garmin chartplotter’s software is mandatory during installation of the radome to ensure compatibility and optimal performance. The \u003cstrong\u003eGMR Fantom™ 18x radome\u003c\/strong\u003e contains no user-serviceable parts; opening the unit by a technician not authorized by Garmin voids the warranty. For safety, never look directly at the antenna at close range while the radar is transmitting, and ensure all personnel are clear of the radar beam before emission, in accordance with ANSI\/IEEE C95.1-1992 standards.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860347371860,"sku":"010-02584-00","price":1928.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f7015363-9d8f-49f4-8b6d-683426072e60.jpg?v=1779192114"},{"product_id":"garmin-radome-gmr-fantom-24x-blanc","title":"GMR Fantom™ 24x radome, white","description":"\u003cp\u003eThe \u003cstrong\u003eGMR Fantom™ 24x radome\u003c\/strong\u003e from \u003cstrong\u003eGarmin\u003c\/strong\u003e provides long-range radar detection with ultra-fast short-pulse technology. It connects via Garmin BlueNet™ or Garmin Marine Network with an adapter, compatible with recent Garmin chartplotters. Powered at 10-32 Vdc, it includes an inline fuse and supports cable extensions up to 6 m with 12 AWG gauge.\u003c\/p\u003e\u003ch3\u003eTechnical positioning within the Garmin range\u003c\/h3\u003e\u003cp\u003eWithin the GMR Fantom™ family, this 24x model outperforms the GMR Fantom 24 with faster rotation and increased power, ideal for medium to large vessels. Compared to the more compact GMR Fantom 18x, it offers greater range and reduced angular resolution thanks to its 24-inch (60 cm) diameter. Against Raymarine Quantum 2 or B\u0026G 4G radomes, the Fantom 24x excels in refresh rate and native Garmin network integration, with an optimized horizontal beam of 12.5° and vertical beam above and below the radiating element.\u003c\/p\u003e\u003ch3\u003eInstallation and technical considerations\u003c\/h3\u003e\u003cp\u003eSurface mounting with supplied M8 x 60 mm threaded rods, torque 13.7-18.6 N·m. Minimum RF safety distance respected; high installation recommended above the waterline to minimize blind spots. Network and power wiring via lockable ports, optional grommets for watertight passages. Status LEDs: green flashing operational, red solid startup, orange software update.","brand":"Garmin","offers":[{"title":"","offer_id":55860350681428,"sku":"010-02585-00","price":2151.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_4b779cd0-f052-4b37-95a8-532f11dfd635.jpg?v=1779192139"},{"product_id":"garmin-radome-gmr-fantom-24x-radar-marine","title":"GMR Fantom™ 24x radome, black","description":"\u003cp\u003e\n    Designed for advanced marine navigation, the Garmin GMR Fantom™ 24x radome (part number 010-02585-10) is a 24-inch solid-state radar system with a 50-watt output power. This model, from the current Fantom lineup, detects targets up to a maximum range of 48 nautical miles and a minimum range of 20 feet. Its rotation speed reaches 60 rpm, ensuring rapid screen refresh for improved detection of movements, including at high speeds.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced technologies and features\u003c\/h3\u003e\n\u003cp\u003e\n    The GMR Fantom™ 24x integrates MotionScope™ technology, which uses the Doppler effect to identify and display moving targets with different colors on the chartplotter, indicating their direction (toward or away from the vessel). This feature is useful for navigating around other boats or detecting weather conditions. The dual-range function allows simultaneous radar images on a split screen, with independent range settings and controls for close and distant views.\n\u003c\/p\u003e\n\u003cp\u003e\n    Other features of the GMR Fantom™ 24x include an energy-saving mode and a timed transmission mode to optimize power consumption, as well as the ability to adjust target size on screen. Auto Bird Gain, Dynamic Auto Gain, and Dynamic Sea Filter functions automatically adjust settings for optimal performance and clearer radar images by reducing sea clutter. True Echo Trails help identify moving targets and potential collision threats. A guard zone can be configured to alert the user when an object enters it. The MARPA system (Mini-Automatic Radar Plotting Aid) enables automatic acquisition and tracking of up to 30 targets, identifying collision threats. Radar overlay displays radar images on compatible chartplotter maps.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This radome is compatible with Garmin GPSMAP chartplotters from the 7x2 Plus, 7x3, 9x2 Plus, 9x3, 10x2, 12x2, 12x3, 7400, 7600, and 8000 series. It features Garmin BlueNet™ network technology for fast connectivity and is compatible with existing Garmin Marine Network systems via an optional adapter cable (part number 010-12531-01). The radar beam has a horizontal width of 3.7 degrees and a vertical width of 25 degrees. The unit operates on 10 to 32 V DC power. The product includes a mounting template, M8 x 1.25 x 60 threaded rods, flat and spring washers, hex nuts, anti-seize compound, and a Garmin BlueNet cable.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860352516436,"sku":"010-02585-10","price":2457.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e19e28b9-376d-4264-886a-8f15cffe7678.jpg?v=1779192165"},{"product_id":"garmin-piedestal-radar-gmr-434-436-xhd3","title":"Piédestal radar GMR 434\/436 xHD3","description":"\u003cp\u003e\n    Conçu pour les navigateurs exigeants, le piédestal radar Garmin GMR 434\/436 xHD3 (référence 010-02779-00) constitue le support fondamental des antennes radar à réseau ouvert Garmin GMR 434 xHD3 (4 pieds) et GMR 436 xHD3 (6 pieds). Il assure une base robuste et stable, essentielle pour l'exploitation optimale des capacités de détection de ces systèmes radar d'une puissance de 4 kW. Ce piédestal garantit une intégration fiable au réseau Garmin BlueNet ou Marine Network du navire. L'ensemble inclut le piédestal et le matériel de montage complet (tiges filetées, rondelles, écrous, vis).\n\u003c\/p\u003e\n\u003ch3\u003ePerformance et Technologies Intégrées\u003c\/h3\u003e\n\u003cp\u003e\n    Le piédestal Garmin GMR 434\/436 xHD3 est la fondation des radars 4 kW de la série xHD3, offrant une portée de détection de 20 mètres à 72 milles nautiques. Comparé aux modèles xHD3 de 12 kW et 25 kW qui étendent la portée à 96 milles nautiques, le GMR 434\/436 xHD3 de 4 kW se positionne comme une solution performante pour la croisière hauturière et la pêche, avec une consommation électrique en transmission de 55 W (18 W en veille). La série xHD3 introduit des technologies avancées telles que le Scan Averaging, une première pour les radars magnétron Garmin, qui filtre le fouillis de mer pour une meilleure détection des cibles. L'ajustement angulaire de la taille des cibles optimise l'affichage des objets à toutes les portées, tandis que les True Echo Trails affichent l'historique des déplacements des bateaux, facilitant l'identification des menaces de collision.\n\u003c\/p\u003e\n\u003ch3\u003eFonctionnalités Avancées pour la Navigation et la Pêche\u003c\/h3\u003e\n\u003cp\u003e\n    Les radars GMR 434\/436 xHD3 supportés par ce piédestal intègrent des fonctionnalités telles que le Dual-Range avec Overlay, permettant l'affichage simultané de cibles proches et lointaines sur un traceur compatible, avec superposition sur la carte. Le mode Auto Bird Gain et Bird Mode Preset aide à localiser les bancs d'oiseaux, indicateurs de bancs de poissons. Les fonctions Dynamic Auto Gain et Dynamic Sea Filter ajustent automatiquement les niveaux de gain pour s'adapter aux conditions de navigation. La vitesse de rotation est sélectionnable à 24 ou 48 tr\/min pour un rafraîchissement rapide de l'image. Le système supporte également le suivi de cibles MARPA (jusqu'à 30 cibles avec capteurs appropriés) et la fonction Guard Zone pour la détection d'intrusions. Le piédestal est conçu pour une robustesse et une étanchéité IPX6, avec une résistance au vent de 80 nœuds, extensible à 100 nœuds avec l'unité de conversion de tension GMR optionnelle. L'alimentation requise est de 11 à 32 V CC.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860403372372,"sku":"010-02779-00","price":3526.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e7d8ef9e-63d9-4c1a-884f-10b80d5f6079.jpg?v=1779192852"},{"product_id":"garmin-piedestal-radar-gmr-1234-1236-xhd3","title":"Piédestal radar GMR 1234\/1236 xHD3","description":"\u003cp\u003e\n    Le piédestal radar Garmin GMR 1234\/1236 xHD3 (010-02779-10) constitue la base structurelle des systèmes radar à antenne ouverte GMR 1234 xHD3 (avec antenne de 4 pieds) et GMR 1236 xHD3 (avec antenne de 6 pieds) de 12 kW. Conçu pour la navigation hauturière et la pêche, il intègre une technologie avancée de traitement d'image haute définition, positionnant ces radars parmi les solutions de pointe de Garmin pour la détection des cibles en mer.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance et fonctionnalités avancées du système radar\u003c\/h3\u003e\n\u003cp\u003e\n    Ce piédestal supporte des antennes offrant une puissance de sortie de 12 kW, permettant une portée maximale allant jusqu'à 96 milles nautiques et une portée minimale de 20 mètres. Les vitesses de rotation disponibles, de 24 et 48 tours par minute, assurent des taux de rafraîchissement rapides. Le système intègre la technologie Scan Averaging, une première pour les radars magnétron Garmin, qui filtre le fouillis de mer et les interférences pour une détection plus claire des cibles. L'ajustement angulaire de la taille des cibles optimise l'affichage à toutes les échelles de portée. Les fonctionnalités incluent également les pistes d'écho réelles (True Echo Trails), l'affichage double portée avec superposition sur la carte, le gain automatique dynamique (Dynamic Auto Gain), le mode oiseaux (Auto Bird Gain et Bird Mode Preset) pour la localisation des bancs de poissons, le suivi de cibles MARPA (jusqu'à 30 cibles avec capteurs additionnels), la zone de garde (Guard Zone) et la superposition radar (Radar Overlay). Le filtre de mer dynamique (Dynamic Sea Filter) s'ajuste automatiquement aux conditions de mer, et le moteur silencieux (Quiet Open-Array Drive Motor) assure un fonctionnement discret.\n\u003c\/p\u003e\n\n\u003ch3\u003eConception robuste et spécifications techniques\u003c\/h3\u003e\n\u003cp\u003e\n    Le piédestal présente des dimensions de 520 x 328 x 314 mm (20.5\" L x 12.9\" H x 12.4\" P) et bénéficie d'une étanchéité IPX6, tandis que l'ensemble du système radar est classé IPX6. Il est compatible avec une alimentation de 10 à 32 V CC ou 11 à 32 V CC. La consommation électrique est de 18 W en veille et de 70 W en mode de transmission normal. En ce qui concerne les antennes, la GMR 1234 xHD3 (4 pieds) mesure 1325 x 122 x 170 mm avec une largeur de faisceau horizontal de 1.8 degré, et la GMR 1236 xHD3 (6 pieds) mesure 1938 x 122 x 170 mm avec une largeur de faisceau horizontal de 1.1 degré. La largeur de faisceau vertical pour les deux modèles est de 23 degrés. La charge maximale de vent supportée est de 80 nœuds, extensible à 100 nœuds avec un convertisseur de tension optionnel pour les modèles 1234\/1236.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntégration et installation\u003c\/h3\u003e\n\u003cp\u003e\n    L'installation du piédestal radar Garmin GMR 1234\/1236 xHD3 requiert une attention particulière pour garantir la stabilité et l'orientation précises de l'antenne, essentielles à la qualité du signal et à la portée de détection. Le processus implique un perçage précis (trous de montage de 15 mm, trou de passage de câble optionnel de 32 mm) et un serrage au couple spécifié pour les fixations (14.7 N-m ou 11 lbf-ft pour le piédestal, 0.81 kgf-m ou 70 lbf-in pour l'antenne), assurant la résilience face aux contraintes dynamiques. Le câblage doit être géré avec rigueur, notamment l'alimentation via un convertisseur de tension dédié (si applicable, entrée 10-32 Vdc) avec un fusible de 15 A en ligne, et une mise à la terre vers une masse d'eau. Il est recommandé de monter le radar au-delà de la portée humaine, au-dessus de la hauteur de la tête, avec une obstruction minimale du faisceau et à une distance sécurisée des sources de chaleur, des autres équipements électroniques et des compas magnétiques pour éviter les interférences. Des extensions de câble d'alimentation nécessitent des calibres de fil spécifiques pour éviter les dysfonctionnements. Une mise à la terre du boîtier radar (et du convertisseur de tension, le cas échéant) doit être réalisée avec un fil de cuivre de 3.31 mm² (12 AWG).\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860404912468,"sku":"010-02779-10","price":5460.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_6b81949f-3d62-4601-9ee2-2d59222ba694.jpg?v=1779192874"},{"product_id":"garmin-piedestal-radar-gmr-xhd3","title":"Piédestal radar GMR 2534\/2536 xHD3","description":"\u003cp\u003e\n    Le piédestal radar Garmin GMR 2534\/2536 xHD3 (SKU: 010-02779-20) est l'élément central pour l'installation des radars à tableau ouvert GMR 2534 xHD3 et GMR 2536 xHD3. Conçu pour les navires de croisière et de pêche hauturière, il supporte des systèmes radar magnétron de 25 kW, offrant une portée maximale de 96 milles nautiques et une détection minimale de 20 mètres.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntégration et performance des radars GMR xHD3\u003c\/h3\u003e\n\u003cp\u003e\n    Ce piédestal est spécifiquement adapté aux antennes de 4 pieds (pour le GMR 2534 xHD3) et 6 pieds (pour le GMR 2536 xHD3), garantissant une largeur de faisceau horizontal de 1,8 degrés et 1,1 degrés respectivement, avec une largeur de faisceau vertical de 23 degrés pour les deux modèles. Les radars associés peuvent opérer à des vitesses de rotation de 24 et 48 tours par minute, et sont conçus pour résister à des vents de 80 nœuds, voire 100 nœuds grâce au convertisseur de tension inclus, soulignant leur robustesse de niveau commercial.\n\u003c\/p\u003e\n\u003cp\u003e\n    La série GMR xHD3 se distingue par des fonctionnalités avancées telles que la technologie Scan Averaging pour filtrer le fouillis de mer, l'ajustement angulaire de la taille des cibles pour une meilleure interprétation, et les pistes d'écho réelles (True Echo Trails) pour identifier les cibles mobiles. Comparativement à des systèmes radar plus compacts ou à dôme, les radars à tableau ouvert comme ceux-ci offrent une résolution supérieure et une meilleure détection des cibles à longue portée, essentielles pour la navigation et la pêche en haute mer. Ce piédestal assure une plateforme stable et sécurisée pour exploiter pleinement ces capacités.\n\u003c\/p\u003e\n\n\u003ch3\u003eConsidérations d'installation et spécifications techniques\u003c\/h3\u003e\n\u003cp\u003e\n    L'installation du piédestal requiert une surface plane et robuste, parallèle à la ligne de flottaison du navire, et doit être positionné en hauteur pour minimiser les obstructions du faisceau radar. Il doit être éloigné des sources de chaleur, des autres équipements électroniques (\u0026gt; 2 m du faisceau), des câbles radio (\u0026gt; 1 m) et des radios SSB (\u0026gt; 2 m) pour éviter les interférences. Le système est alimenté par une tension de 10 à 32 V CC, avec une consommation de 18 W en veille et 70 W en transmission normale. Sa certification IPX6 atteste de sa résistance aux projections d'eau puissantes. Ses dimensions sont de 520 mm (largeur) x 328 mm (hauteur) x 314 mm (profondeur).\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860406747476,"sku":"010-02779-20","price":7607.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_3f722151-6375-46a8-8b1d-bc74cbba600f.jpg?v=1779192896"},{"product_id":"garmin-antenne-radar-gmr-xhd3-4-pieds","title":"Antenne radar GMR xHD3 4'","description":"\u003cp\u003e\n    Conçue pour la navigation hauturière et la pêche, l'antenne radar Garmin GMR xHD3 4' (réf. 010-02780-00) est l'antenne open array de 4 pieds utilisée dans les systèmes radar avancés de la série GMR xHD3, tels que le GMR 434 xHD3. Issue de cette série, elle intègre les dernières technologies de plateforme de Garmin pour offrir une imagerie haute résolution et des capacités de détection précises. Ce modèle d'antenne, intégré aux systèmes GMR xHD3, succède aux générations précédentes de radars GMR, apportant des améliorations en matière de clarté d'image et de discrimination des cibles, et s'intègre nativement aux réseaux Garmin BlueNet™ et Garmin Marine Network pour une compatibilité fluide avec l'écosystème Garmin.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance et Caractéristiques Techniques\u003c\/h3\u003e\n\u003cp\u003e\n    Le système radar GMR 434 xHD3, équipé de cette antenne de 1,22 mètre (4 pieds), offre une puissance de transmission de 4 kW et assure une portée de détection allant de 20 mètres à 72 milles nautiques. Sa largeur de faisceau horizontal de 1,8 degré et vertical de 23 degrés, combinée à des vitesses de rotation de 24 ou 48 RPM, permet une acquisition rapide et détaillée des cibles. Le système est conçu pour fonctionner dans des conditions de vent allant jusqu'à 80 nœuds, avec une capacité accrue à 100 nœuds si un convertisseur de tension optionnel est utilisé. Le GMR 434 xHD3 est classé IPX6 pour sa résistance à l'eau et nécessite une alimentation de 11 à 32 V DC, avec une consommation de 18 W en veille et 55 W en mode transmission normale. L'ensemble (antenne et piédestal) pèse 27,6 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eFonctionnalités Avancées pour la Détection Marine\u003c\/h3\u003e\n\u003cp\u003e\n    Le radar \u003ca href=\"\/en-us\/garmin-antenne-radar-gmr-xHD3-4-pieds\"\u003eGarmin GMR 434 xHD3\u003c\/a\u003e intègre des technologies clés pour une meilleure interprétation de l'environnement marin. La technologie Scan Averaging filtre le fouillis de mer et les interférences, améliorant la détection des cibles. Les True Echo Trails affichent l'historique des mouvements des bateaux, facilitant l'identification des menaces de collision. La fonction Dual Range avec superposition permet d'afficher simultanément deux plages de détection indépendantes sur un écran compatible, avec la possibilité de les superposer sur une carte. Des modes spécifiques comme Auto Bird Gain et Bird Mode Preset aident à localiser les oiseaux en surface, indicateurs potentiels de bancs de poissons. L'ajustement angulaire de la taille des cibles optimise la forme des objets affichés, tandis que le Dynamic Auto Gain adapte les niveaux de gain aux environnements variés (port, côtier, hauturier). Le Dynamic Sea Filter ajuste automatiquement le gain pour gérer le fouillis de mer en fonction des conditions. De plus, le système supporte le suivi de cibles MARPA (jusqu'à 30 cibles avec capteurs additionnels) et dispose d'une zone de garde configurable pour alerter en cas d'intrusion. Son moteur d'entraînement open array silencieux contribue à une opération discrète.\n\u003c\/p\u003e\n\n\u003ch3\u003eConsidérations d'Installation et de Connectivité\u003c\/h3\u003e\n\u003cp\u003e\n    L'intégration du \u003ca href=\"\/en-us\/garmin-antenne-radar-gmr-xHD3-4-pieds\"\u003eGMR 434 xHD3\u003c\/a\u003e se fait via les réseaux Garmin BlueNet™ ou Garmin Marine Network. Le système requiert une alimentation de 11 à 32 Vdc. Une protection par fusible de 15 A en ligne est obligatoire, et un fusible de 30 A est nécessaire si le convertisseur de tension optionnel est utilisé entre le convertisseur et la batterie. Le raccordement à la masse nautique est impératif. Pour une performance optimale et la sécurité RF, le radar doit être monté au-dessus de la ligne de quille du navire, avec une hauteur de faisceau vertical au-dessus de la tête, et à une distance de sécurité minimale spécifiée pour éviter l'exposition aux radiofréquences. Il est recommandé que l'installation soit effectuée par un installateur marine qualifié pour garantir la conformité aux directives de montage, éviter les interférences avec les instruments de navigation comme le compas magnétique ou les antennes GPS, et assurer une étanchéité adéquate des passages de câbles avec du mastic marine. Les câbles d'alimentation et de réseau ne doivent pas être acheminés en parallèle avec d'autres câbles pour éviter les interférences.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860408484180,"sku":"010-02780-00","price":614.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_0595bde4-6614-4351-b3a2-bbd943f09483.jpg?v=1779192919"},{"product_id":"garmin-radar-gmr-xhd3-6","title":"Antenne radar GMR xHD3 6'","description":"\u003cp\u003e\n    L'antenne radar Garmin GMR xHD3 6' représente une solution avancée pour la navigation et la détection de cibles. Appartenant à la série GMR xHD3, cette antenne ouverte de 6 pieds est conçue pour les navigateurs exigeant une précision accrue et des performances radar optimisées. Elle s'intègre nativement aux écosystèmes Garmin via le réseau Garmin BlueNet ou Garmin Marine Network, assurant une compatibilité et une synergie fluides avec les autres instruments Garmin. Sa conception est axée sur la fiabilité et la performance technique, la positionnant comme un choix robuste pour les navires nécessitant une portée et une clarté de détection supérieures à celles des radômes compacts, mais sans l'encombrement des plus grandes antennes ouvertes.\n\u003c\/p\u003e\n\n\u003ch3\u003ePrécision et performances techniques\u003c\/h3\u003e\n\u003cp\u003e\n    La GMR xHD3 6' offre une détection de cibles avec une précision notable grâce à sa conception d'antenne ouverte. Le faisceau radar vertical se propage avec une largeur de 11,5° au-dessus et 11,5° en dessous de l'élément rayonnant, permettant une couverture étendue. Pour les navires avec des angles d'étrave plus prononcés en vitesse de croisière, l'angle d'installation peut être ajusté pour orienter légèrement le faisceau vers la ligne de flottaison au repos, avec l'utilisation de cales si nécessaire. Une installation en hauteur, au-dessus de la ligne de quille du navire et avec un minimum d'obstacles, maximise la portée de détection et minimise les secteurs aveugles ou les fausses échos.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntégration et installation réseau\u003c\/h3\u003e\n\u003cp\u003e\n    Cette antenne radar nécessite une alimentation de 10 à 32 Vcc, avec la possibilité de connexion directe à la batterie (11 à 32 Vcc pour certains modèles sans convertisseur de tension inclus). Un porte-fusible en ligne de 15 A est intégré au câble d'alimentation du radar, et un fusible supplémentaire de 30 A est requis entre le convertisseur de tension (si utilisé) et la batterie. L'intégration au réseau Garmin se fait via Garmin BlueNet ou Garmin Marine Network. Le processus d'installation, recommandé par un professionnel qualifié, implique le perçage de trous de montage de 15 mm et un trou passe-câbles de 32 mm si nécessaire. Le kit comprend le gabarit de montage, l'apprêt Petrolatum Primer, les rondelles d'épaulement en plastique, les tiges filetées, les écrous et les rondelles pour le montage du socle, ainsi que les vis hexagonales, rondelles ressort et rondelles plates pour la fixation de l'antenne. Il est à noter que le câble de mise à la masse n'est pas fourni et requiert un fil de cuivre de 3,31 mm² (12 AWG).\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimisation de l'installation physique\u003c\/h3\u003e\n\u003cp\u003e\n    Pour des performances optimales et une sécurité accrue, l'installation de la GMR xHD3 6' doit être réalisée en tenant compte de plusieurs facteurs. Le radar doit être monté hors de portée des personnes, avec le faisceau vertical au-dessus de la hauteur de la tête, et à une distance de sécurité minimale spécifiée pour éviter l'exposition aux radiofréquences. Il est essentiel de l'éloigner des sources de chaleur (cheminées, lumières) et de le positionner à un niveau différent des barres de flèche horizontales. Pour éviter les interférences, le radar doit être installé à plus de 2 m (6,5 pi) des autres équipements électroniques et câbles, à plus de 1 m (40 po) des équipements émetteurs et des câbles radio (VHF), et à plus de 2 m (6,5 pi) des radios BLU. Les antennes GPS doivent être positionnées soit au-dessus, soit en dessous du chemin du faisceau radar. Ces considérations garantissent le fonctionnement optimal de la GMR xHD3 6' et la sécurité à bord.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860410188116,"sku":"010-02780-10","price":1117.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_62b80c98-123a-4f6e-9c58-c07e648a7828.jpg?v=1779192941"},{"product_id":"garmin-gmr-18-xhd3-radome-radar-marin","title":"GMR™ 18 xHD3 Radôme","description":"\u003cp\u003e\n    Le radôme \u003cstrong\u003eGarmin GMR 18 xHD3\u003c\/strong\u003e représente une solution de radar compacte et performante, conçue pour les navires nécessitant une détection radar fiable et une intégration fluide avec les systèmes de navigation Garmin. Ce modèle s'inscrit dans la gamme xHD3, offrant des améliorations significatives par rapport aux générations précédentes comme le GMR 18 HD3, notamment en termes de traitement du signal pour une meilleure séparation des cibles et une clarté accrue de l'image radar.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnologie et Performance Radar\u003c\/h3\u003e\n\u003cp\u003e\n    Le GMR 18 xHD3 se distingue par sa capacité à émettre de l'énergie électromagnétique avec une précision optimisée. Sa largeur de faisceau verticale est de 12,5 degrés au-dessus et 12,5 degrés en dessous de l'élément rayonnant, soit un total de 25 degrés, permettant une couverture efficace même en conditions de houle. Cette performance est essentielle pour détecter les cibles à courte et moyenne portée, rendant ce radôme idéal pour la navigation côtière, la détection des précipitations et l'évitement de collisions. Comparé au GMR 24 xHD3, le GMR 18 xHD3 offre un format plus compact de 18 pouces, adapté aux bateaux de taille moyenne où l'espace est un facteur critique, tout en conservant les avantages du traitement xHD3.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntégration et Connectivité Avancées\u003c\/h3\u003e\n\u003cp\u003e\n    L'intégration est un point fort majeur du GMR 18 xHD3 grâce à la technologie de réseau \u003cstrong\u003eGarmin BlueNet™\u003c\/strong\u003e. Ce radôme est entièrement compatible avec les appareils Garmin BlueNet et Garmin Marine Network. Pour une performance optimale et la prise en charge des futures mises à jour, il est recommandé de le connecter à un traceur de cartes Garmin BlueNet ou à un switch Garmin BlueNet 20 à l'aide du câble Garmin BlueNet fourni. Pour les systèmes plus anciens équipés uniquement d'appareils Garmin Marine Network, une connexion est possible via le câble adaptateur Garmin Marine Network (référence 010-12531-01), assurant ainsi une polyvalence d'installation. Cette capacité d'intégration le positionne comme un élément stratégique pour l'extension ou la modernisation d'un système de navigation Garmin existant.\n\u003c\/p\u003e\n\n\u003ch3\u003eConsidérations d'Installation et Fiabilité\u003c\/h3\u003e\n\u003cp\u003e\n    L'installation du GMR 18 xHD3 nécessite une attention particulière pour garantir une performance optimale et la sécurité. Le radôme doit être monté à une hauteur appropriée pour que le faisceau radar soit au-dessus de la hauteur de la tête et minimiser les obstructions. Des distances de sécurité spécifiques sont à respecter par rapport aux compas magnétiques, aux antennes GPS et aux autres équipements émetteurs (plus de 2 m du chemin du faisceau pour les électroniques, plus de 1 m pour les équipements émetteurs et câbles radio, plus de 2 m pour les radios BLU). Le processus de montage utilise quatre tiges filetées M8 x 1.25 x 60 pour des épaisseurs de surface de 5 à 30 mm, avec un couple de serrage recommandé de 13,7 à 18,6 N-m. La connexion électrique requiert un câble d'alimentation avec un porte-fusible intégré, et des recommandations précises sur le calibre du fil sont fournies pour les extensions de câble (par exemple, 16 AWG pour 2 m, 12 AWG pour 6 m). Ces détails techniques soulignent l'ingénierie robuste et la fiabilité attendue d'un équipement marin de cette catégorie, comparable aux standards de qualité des radômes concurrents tels que Raymarine ou Furuno dans le segment des radars compacts à traitement numérique avancé.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860424442196,"sku":"010-02841-00","price":1908.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e9bb5232-9215-4a18-87a4-b1c88e43bf69.jpg?v=1779193184"},{"product_id":"garmin-gmr-24-xhd3-radome-radar-marin","title":"GMR™ 24 xHD3 Radôme","description":"\u003cp\u003e\n    Le radôme \u003cstrong\u003eGarmin GMR 24 xHD3\u003c\/strong\u003e s'inscrit dans la gamme avancée de systèmes radar marins de Garmin, aux côtés du GMR 18 HD3 et du GMR 18 xHD3. Ce modèle 24 pouces xHD3 est conçu pour les plaisanciers exigeants, offrant des capacités de détection radar haute définition et une intégration réseau optimisée. Il se positionne comme une solution performante pour la navigation, la détection des cibles et la sécurité en mer, bénéficiant des dernières avancées technologiques de Garmin en matière de traitement du signal.\n\u003c\/p\u003e\n\n\u003ch3\u003eConsidérations d'installation et de montage\u003c\/h3\u003e\n\u003cp\u003e\n    L'installation du radôme GMR 24 xHD3 requiert une attention particulière aux recommandations de montage pour garantir des performances optimales et la sécurité. Il doit être monté en hauteur, au-dessus de la ligne de quille du navire, avec un minimum d'obstructions pour éviter les zones d'ombre ou les faux échos. La dispersion verticale du faisceau radar est de 12,5 degrés au-dessus et en dessous de l'élément rayonnant, nécessitant une hauteur d'installation adéquate pour dégager les structures comme les toits de cabine. Un élévateur peut être nécessaire pour optimiser la portée et la qualité du signal. Le radôme doit également être éloigné des sources de chaleur, des autres équipements électroniques (au moins 2 m) et des compas magnétiques (distance de sécurité spécifiée), ainsi que des équipements de transmission (au moins 1 m).\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivité réseau et alimentation\u003c\/h3\u003e\n\u003cp\u003e\n    Le GMR 24 xHD3 utilise la technologie de réseau \u003cstrong\u003eGarmin BlueNet™\u003c\/strong\u003e, assurant une compatibilité avec les appareils Garmin BlueNet (traceurs, switch BlueNet 20) et les appareils \u003cstrong\u003eGarmin Marine Network\u003c\/strong\u003e. Pour une performance maximale et un support optimal des futures mises à jour, il est recommandé de connecter le radôme au côté Garmin BlueNet du réseau. Une connexion aux appareils Garmin Marine Network est possible via un câble adaptateur Garmin Marine Network (référence 010-12531-01, vendu séparément si non inclus). L'alimentation doit être raccordée directement à la batterie, en respectant les jauges de fil appropriées pour les extensions de câble (16 AWG pour 2m, 14 AWG pour 4m, 12 AWG pour 6m) et en conservant impérativement le porte-fusible en ligne pour des raisons de sécurité et de garantie. Une mise à jour logicielle du traceur Garmin est indispensable lors de l'installation de ce dispositif.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860424868180,"sku":"010-02842-00","price":2460.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_425af4b3-45c0-4c21-961b-73d55ad03cff.jpg?v=1779193208"},{"product_id":"garmin-gmr-18-hd3-radome-radar-marin","title":"GMR™ 18 HD3 Radôme","description":"\u003cp\u003e\n    Le \u003cstrong\u003eradôme Garmin GMR 18 HD3\u003c\/strong\u003e est un radar marin compact et performant de 18 pouces, conçu pour optimiser la connaissance de la situation en mer. Issu de la nouvelle génération HD3 de Garmin, il intègre la connectivité BlueNet™ pour une intégration fluide avec les systèmes de navigation Garmin modernes. Avec des dimensions de 508 mm de diamètre et 248 mm de hauteur, pour un poids de 7,0 kg, ce radôme est adapté à une large gamme de navires. Sa certification d'étanchéité IPX7 garantit sa robustesse dans l'environnement marin.\n\u003c\/p\u003e\n\u003ch3\u003ePerformances techniques et capacités de détection\u003c\/h3\u003e\n\u003cp\u003e\n    Le GMR 18 HD3 opère sur la bande X (9,38 à 9,44 GHz) avec une puissance de transmission de 4 kW, permettant une portée maximale de 36 milles nautiques. Sa détection à courte portée est assurée jusqu'à un minimum de 20 mètres, offrant une excellente visibilité des cibles proches. L'antenne de 43 cm de longueur tourne à une vitesse de 24 tr\/min, caractérisée par un faible niveau sonore et une consommation d'énergie optimisée. Le faisceau radar présente une largeur horizontale de 5,2° et verticale de 25°. La résolution de 8 bits en couleurs réelles assure une séparation des cibles supérieure, améliorant la clarté et la précision des informations affichées sur votre traceur de cartes.\n\u003c\/p\u003e\n\u003ch3\u003eFonctionnalités avancées et intégration système\u003c\/h3\u003e\n\u003cp\u003e\n    Ce radar est équipé de fonctions intelligentes telles que le gain automatique dynamique (Dynamic Auto Gain) qui ajuste les niveaux radar pour des performances optimales, et le filtre de mer dynamique (Dynamic Sea Filter) qui gère automatiquement l'encombrement dû à l'état de la mer. Pour une sécurité accrue, le suivi de cibles MARPA permet de surveiller les autres navires et de prévenir les collisions (nécessite un capteur de cap externe, vendu séparément). Le GMR 18 HD3 prend en charge la fonction double radar et l'incrustation radar sur les cartes du traceur (un pilote automatique ou un capteur de cap est recommandé pour des résultats optimaux). Le mode de transmission temporisé permet de réduire la consommation électrique en spécifiant les temps de transmission. Ce radôme se distingue par sa connectivité BlueNet™, offrant des performances améliorées et une meilleure prise en charge des futures mises à jour par rapport aux systèmes Garmin Marine Network plus anciens, bien qu'il reste compatible avec ces derniers via un câble adaptateur (référence 010-12531-01).\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860426637652,"sku":"010-02843-00","price":1533.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c4bf391e-6262-40f5-ad58-3a5ac1ae1caa.jpg?v=1779193230"},{"product_id":"garmin-radome-gmr-fantom-18x-radar-marin-010-02584-10","title":"GMR Fantom™ 18x radome, black","description":"\u003cp\u003e\n    Designed for navigation safety and optimization, the \u003cstrong\u003eGarmin GMR Fantom 18x\u003c\/strong\u003e radome is a compact 18-inch solid-state radar system. It features 50 watts (peak) power and can detect targets up to 48 nautical miles while providing close-range detection from 6 meters. Part of the Fantom lineup, this model introduces notable innovations for boaters and demanding sailors.\n\u003c\/p\u003e\n\n\u003ch3\u003eSolid-state technology and advanced detection\u003c\/h3\u003e\n\u003cp\u003e\n    The GMR Fantom 18x uses solid-state technology, offering rapid antenna rotation up to 60 rpm for dynamic image refresh. Its beam width of 5.2 degrees horizontal by 25 degrees vertical ensures precise coverage. MotionScope™ technology is a key feature, using Doppler effect to identify and color moving targets directly on the chartplotter screen, aiding anticipation of vessel movements or weather fronts. This function is also useful for fishing, helping spot surface bird flocks with Auto Bird Gain.\n\u003c\/p\u003e\n\n\u003ch3\u003eOperational features and network integration\u003c\/h3\u003e\n\u003cp\u003e\n    For increased operational flexibility, the Garmin GMR Fantom 18x radar integrates Dual Range, allowing simultaneous display of short and long-range views with independent settings. Power Save and Timed Transmit modes offer fine-tuned power consumption management, with standby consumption of 4W max and 24W max in energy-saving transmission mode (33W max in normal mode). The True Echo Trails function displays target trajectory history, while Dynamic Auto Gain and Dynamic Sea Filter automatically adjust parameters for optimal performance in various conditions. The system supports radar overlay on charts (Radar Overlay) and automatic MARPA acquisition of up to 30 targets (requires external heading sensor). Integration is via Garmin BlueNet™ and Garmin Marine Network.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust design and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    With a diameter of 50.8 cm, height of 24.8 cm, and weight of 6.35 kg, the GMR Fantom 18x radome is designed to withstand marine environments with IPX7 waterproof rating. It operates on a 10 to 32V DC voltage range. The safe distance from a compass is 97 cm. This model, more compact than its GMR Fantom 24x counterpart, is ideal for medium-sized vessels seeking a high-performance, energy-efficient solid-state radar.","brand":"Garmin","offers":[{"title":"","offer_id":55860934541652,"sku":"010-02584-10","price":2016.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_17ae1ef8-5536-4be3-8d8e-89bd9a8ec550.jpg?v=1779199508"},{"product_id":"raymarine-quantum-q24c-antenne-radar-doppler-chirp","title":"Quantum Q24C Radar Antenna with 10m Power Cable","description":"\u003cp\u003e\n    Designed for simplified integration and modern radar performance, the Raymarine Quantum Q24C E70210 radar antenna is a compact and lightweight solution for navigation. This 18-inch dome radar integrates CHIRP semiconductor technology, distinguishing it from traditional magnetron radar systems with instant startup and low power consumption. It is particularly suited to sailboats and mid-sized powerboats.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced radar technology and Doppler detection\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum Q24C, part of the Quantum 2 Doppler series, features Doppler technology for improved detection of moving targets. This feature allows quick visualization of potentially hazardous targets, highlighted by color coding directly on the compatible Raymarine multifunction display. This Doppler processing capability represents an advancement over first-generation Quantum radars, providing increased situational awareness for navigators.\n\u003c\/p\u003e\n\u003ch3\u003eFlexible connectivity and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum Q24C radar antenna offers versatile connectivity options, either via Wi-Fi for simplified wiring or RayNet for full integration into the onboard Raymarine network. This flexibility facilitates installation on different types of vessels. The unit is compatible with Raymarine multifunction displays from the Axiom and Element series. Its compact dimensions, with a diameter of 541 mm and height of 209.5 mm, along with its lightweight design, simplify mast or arch mounting. Power is supplied via a 12 V or 24 V system, and a 10 m power cable is included for installation.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900677243220,"sku":"E70210","price":1719.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_ecc65ac4-9762-45f1-b0ed-54e5058b6c88.jpg?v=1779378601"},{"product_id":"raymarine-antenne-radar-quantum-q24d-doppler","title":"Black Radar Quantum Q24D Doppler Antenna without Power or Data Cable","description":"\u003cp\u003e\n    The Raymarine Quantum Q24D Doppler radar, identified by product number E70498-B in its black finish, is a compact solid-state radome antenna. Designed for recreational boating and medium-sized workboats, it integrates Doppler technology for precise identification of moving targets. The unit dimensions are 209.5 mm in height, 541 mm in width, and 541 mm in depth, with four M8x25 mounting points.\n\u003c\/p\u003e\n\u003ch3\u003eDoppler technology for enhanced situational awareness\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike traditional magnetron radars, the Quantum Q24D offers instant start-up and reduced power consumption, which is beneficial for sailboats and powerboats where energy optimization is critical. Its Doppler capability distinguishes incoming echoes from outgoing echoes, displaying threatening targets in red and targets moving away in green. This feature improves situational awareness compared to non-Doppler solid-state radars in the Quantum range.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Installation Flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    This radome connects via a power connector and a data connector, with an optional Wi-Fi link to simplify data cable installation. It is compatible with Raymarine multifunction displays, offering seamless integration into existing navigation systems. Model E70498-B is specifically the antenna alone, without power or data cables, making it suitable for installations requiring specific cable lengths or for replacing an existing unit.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900779905364,"sku":"E70498-B","price":2132.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_0f6c3869-7c58-4137-9731-83fcec151663.jpg?v=1779378904"},{"product_id":"raymarine-piedestal-radar-cyclone-55w","title":"Radar Pedestal Cyclone 55 Watts","description":"\u003cp\u003e\n    The Raymarine Cyclone 55W radar pedestal (E70620) is the core component of the Cyclone open-array radar systems, providing a high-performance base for navigation and marine detection. Designed to integrate with Raymarine open-array antennas of 36, 48, and 72 inches, this pedestal delivers 55 watts of power, optimized for precise target detection and range suitable for demanding recreational boaters and coastal fishing vessels.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Cyclone radar system, of which this pedestal is a central component, offers Doppler radar capabilities, enabling rapid and intuitive identification of moving targets via color coding—a key feature for safety at sea and fishing optimization. The Cyclone 55W pedestal is compatible with modern Raymarine multifunction displays, ensuring seamless integration within LightHouse architectures. For optimal performance, the system requires reliable data sources for radar target acquisition and Doppler functions.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With mounting points spaced at 335 x 271 mm and a base width of 360 mm, the pedestal is designed for robust installation. It features four M10 mounting points for secure attachment. Cable routing options (rear or central exit) and a minimum bending radius of 52 mm facilitate integration on various mast or arch configurations. Positioned as an alternative to enclosed radomes, the Cyclone 55W offers superior resolution and range, distinguishing itself in the Raymarine lineup as an intermediate solution between compact systems and high-power professional radars like the Cyclone Pro.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900852781396,"sku":"E70620","price":4144.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_a8953136-23d6-40c0-afac-ba03f53b1109.jpg?v=1779379129"},{"product_id":"raymarine-piedestal-radar-cyclone-pro-110w","title":"Radar Pedestal Raymarine Cyclone Pro 110 Watts","description":"\u003cp\u003e\n    Designed for demanding sailors, the \u003cstrong\u003eRaymarine Cyclone Pro 110 Watts radar pedestal (E70621)\u003c\/strong\u003e is the core of a high-performance open array radar system. Positioned at the top of Raymarine’s Cyclone range, this pedestal delivers 110 watts of power, distinguishing it from standard Cyclone models and lower-power radome radars. It is the essential foundation for detecting and tracking marine targets in varied conditions, offering superior range and clarity.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Cyclone Pro 110 Watts pedestal is compatible with different open array antenna sizes (36, 48, and 72 inches), allowing customization based on the vessel’s installation and performance requirements. It integrates with compatible Raymarine multifunction displays (MFD), such as the Axiom series, to leverage advanced features like Doppler radar and ARPA capability. Doppler radar enables rapid identification of hazardous targets via color coding, while the ARPA function (requiring a radar target acquisition data source) provides automatic tracking and CPA\/TCPA calculations for better decision-making. This capability positions it favorably against competing systems from Garmin (Fantom series) or B\u0026G (Halo series) in the high-performance open array radar segment.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the pedestal involves secure mounting via four M10 mounting points. Cable management is simplified with rear or central exit options, featuring a minimum bending radius of 52 mm for connections. The system requires a VCM100 voltage converter module (sold separately) for power supply and uses RayNet cables for data transmission. These specifications ensure reliable and durable integration in a marine environment. It is imperative to consult the installation manuals for detailed connection information and product specifications, including compass safety distance requirements.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900864446804,"sku":"E70621","price":5815.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_600178e5-05b0-441d-b0df-3c17cf8beba1.jpg?v=1779379161"},{"product_id":"raymarine-antenne-poutre-cyclone-3-radar-marine","title":"Raymarine Cyclone 3' Antenna","description":"\u003cp\u003e\n    Designed for next-generation radar systems, the Raymarine Cyclone 3' (E70628) antenna is a key component of the Cyclone series. It is specifically designed to integrate with Cyclone (E70620) and Cyclone Pro (E70621) pedestals, requiring the VCM100 voltage converter module (E70648) for operation. This 3-foot antenna is the most compact option in the Cyclone range, which also includes 4- and 6-foot versions, providing a solution for vessels with limited installation space.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    The Cyclone 3' antenna enables full use of Cyclone radar capabilities, including Doppler processing for identifying moving targets and ARPA features for automatic tracking, subject to the software requirements of compatible multifunction displays and required data sources. Its design complies with safety and electromagnetic compatibility standards (in accordance with health\/safety, EMC, and radio spectrum usage requirements), ensuring conformity with Directive 2014\/53\/EU.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Measuring 1080 mm in total length, this antenna is designed to be mounted on the rotation center of Cyclone pedestals. It features M10 mounting points (4 positions) with a 70 mm spacing, and a mounting area 343 mm wide. The power and data cables must follow a minimum bend radius of 52 mm to ensure connection integrity. Detailed connection information and specifications are available in installation manual 87402 (Rev 8).\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900878602580,"sku":"E70628","price":1933.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_77ce7d69-f048-4231-a7a0-7dee90bb8a55.jpg?v=1779379193"},{"product_id":"raymarine-antenne-poutre-cyclone-4-radar","title":"Raymarine Cyclone 4' Open Array Antenna","description":"\u003cp\u003e\n    Designed for demanding sailors, the Raymarine Cyclone 4' open array antenna (E70629) is a key component of the Cyclone open array radar series. This unit is intended for integration into a complete radar system, providing advanced target detection and tracking capabilities through Doppler technology.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The Cyclone 4' open array antenna has a maximum length of 1374 mm in rotation. Its design includes M10 mounting points (4 positions) spaced 70 mm apart, ensuring a secure installation on a compatible mast base. The minimum cable bend radius is 52 mm, allowing flexibility when routing power and data connections. Cable exits are available at the rear and center of the unit, offering installation options.\n\u003c\/p\u003e\n\u003ch3\u003eSystem Integration and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The E70629 antenna is compatible with Raymarine multifunction displays running LightHouse software, enabling access to Doppler and ARPA (Automatic Radar Plotting Aid) target acquisition features. Unlike smaller radar domes such as the Raymarine Quantum, the Cyclone 4' open array antenna is optimized for longer ranges and better target separation, suitable for vessels requiring detailed radar monitoring. For full operation, it requires a mast base and a VCM100 voltage converter module, sold separately.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900889416020,"sku":"E70629","price":2156.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_0826600a-e0c0-40d9-a346-422c796e161e.jpg?v=1779379223"},{"product_id":"raymarine-antenne-poutre-cyclone-6-radar-doppler","title":"Raymarine Cyclone 6' open array radar beam antenna","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine Cyclone 6' open array radar beam antenna\u003c\/strong\u003e (E70630) is an open array radar solution designed for navigation and safety at sea. Part of the Cyclone series, this 6-foot model is positioned as a choice for vessels requiring improved range and target separation compared to compact radar domes. It integrates Doppler detection capabilities, providing essential analysis of moving targets for collision avoidance. This antenna is supplied with a pedestal and requires the use of the VCM100 voltage converter module (E70648) for operation.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and technical integration\u003c\/h3\u003e\n\u003cp\u003e\n    With an antenna length of 1945 mm and a maximum rotation diameter of 1969 mm, the \u003cstrong\u003eCyclone 6'\u003c\/strong\u003e antenna is designed for installation on masts or radar arches. The pedestal features four M10 mounting points. Cable routing options include a rear exit or through-mounting, offering installation flexibility. The Cyclone series is compatible with Raymarine multifunction displays requiring a specific software version to access advanced features such as ARPA target acquisition and Doppler data. Technical documentation highlights requirements for compass safe distances and general radar positioning to optimize performance and minimize interference.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning within the Raymarine range\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCyclone 6' open array radar beam antenna\u003c\/strong\u003e fits within Raymarine’s open array radar range, complementing smaller and larger size options available. While it shares characteristics with the Cyclone Pro version, the technical specifications detailed here focus on the basic features of the Cyclone series. This 6-foot configuration offers a balance between installation compactness and radar performance, particularly regarding angular resolution and target detection capability at various distances. It represents an alternative to Quantum radar domes or open array systems from competing brands such as Garmin Fantom or B\u0026G Halo, emphasizing integration within the Raymarine ecosystem and Doppler features.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900898066772,"sku":"E70630","price":2646.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_5b88dddd-d62b-4928-9fcf-0dbe676bceb0.jpg?v=1779379250"},{"product_id":"raymarine-antenne-radar-quantum-q24c-doppler-cables-10m","title":"Quantum Q24C Radar Antenna with 10m Power and Data Cables","description":"\u003cp\u003e\n    Designed for recreational boating and semi-professional use, the Raymarine Quantum Q24C radar antenna integrates the Doppler technology from the Quantum 2 range. This 18-inch compact radome offers advanced target detection and improved echo separation thanks to CHIRP pulse compression. The Q24C model positions itself as a collision monitoring and prevention solution for mid-sized vessels, providing features typically associated with larger systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eDoppler Technology and Advanced Safety\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum 2 Doppler Radar features Doppler detection technology that identifies and colors moving targets, facilitating quick interpretation of hazardous situations. Approaching targets are displayed in red, while those moving away are in green, enabling instant visual assessment of collision threats. This functionality represents an evolution over first-generation Quantum radars, which focused primarily on pulse compression without Doppler analysis of moving targets. Compared to competing systems such as Garmin’s Fantom radars or Furuno’s DRS4D-NXT, the Quantum 2 Q24C offers a compact and efficient alternative for integration with Raymarine multifunction displays.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum Q24C radar antenna is designed for wired integration via the RayNet network, ensuring a stable and fast connection. It is compatible with a wide range of Raymarine multifunction displays, including the Axiom series. Installation requires a Doppler data source and radar target acquisition data (MARPA\/automatic acquisition) to fully exploit its capabilities. Model T70243 is supplied with 10-meter power and data cables, simplifying the installation process for many configurations. Environmental and power specifications comply with marine requirements, ensuring reliable operation in various conditions.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55902283825492,"sku":"T70243","price":1676.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_e559246e-fece-432e-9aed-2fd584af6258.jpg?v=1779384149"},{"product_id":"raymarine-antenne-radar-quantum-q24c-doppler-chirp","title":"Quantum Q24C Radar Dome Antenna with 15m Power and Data Cables","description":"\u003cp\u003e\n    Designed for detailed marine surveillance, the Raymarine Quantum Q24C (T70266) radar dome integrates CHIRP pulse-compression technology and Doppler detection. This model is positioned as a compact solution for recreational vessels requiring precise target identification. It offers an alternative to traditional magnetron radars, with reduced power consumption and near-instant startup.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced Doppler technology for optimized detection\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum Q24C stands out for its ability to use the Doppler effect to identify moving targets. Approaching targets are colored red, while those moving away are displayed in green, enabling quick and intuitive interpretation of potential threats or friendly vessels. This feature significantly enhances safety at sea, particularly in reduced visibility conditions. Compared to the first generation of Quantum radars, the Quantum 2 Q24C adds this Doppler dimension, making it a relevant choice against competing domes that do not offer this capability.\n\u003c\/p\u003e\n\u003ch3\u003eFlexible connectivity and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum Q24C radar dome offers flexible installation options with Wi-Fi and wired (RayNet) connectivity. The Wi-Fi connection simplifies wiring, reducing installation time and complexity while ensuring seamless integration with compatible Raymarine multifunction displays. For systems requiring maximum reliability or multiple displays, a direct connection via RayNet is also possible. This radar comes with 15-meter power and data cables, facilitating installation on most masts or arches. For advanced Doppler functions such as MARPA or automatic target acquisition, a heading data source is required.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55902316855636,"sku":"T70266","price":1850.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_548c50a8-4f96-48cf-93d9-7c3d40e1fc14.jpg?v=1779384320"},{"product_id":"lowrance-halo24-radar-compression-impulsion","title":"HALO24 Radar","description":"\u003cp\u003e\n    Designed for advanced target detection and collision avoidance, the \u003cstrong\u003eLowrance HALO24\u003c\/strong\u003e radar is a 24-inch pulse-compression radome. It stands out with its solid-state technology, which eliminates the warm-up time of traditional magnetrons, enabling instant start from standby mode. This model operates on the X-band (9.4 to 9.5 GHz) with a peak power of 25 W, offering a detection range from 6 meters to 48 nautical miles (89 km) with 18 range settings.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Technology For Safety And Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLowrance HALO24\u003c\/strong\u003e integrates VelocityTrack™ Doppler technology, which provides instant visual feedback on the movement of radar targets. Approaching vessels are color-coded for better visibility, while those moving away are deprioritized, greatly simplifying collision avoidance without requiring manual target selection. This capability is complemented by the dual-range function, allowing simultaneous monitoring of distant weather conditions and immediate collision risks.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration And Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Compared to the Halo20 and Halo20+ models, the \u003cstrong\u003eHALO24\u003c\/strong\u003e features a diameter of 610 mm and a weight of 6.9 kg (without cable), slightly larger than the 510 mm and 5.9 kg of the smaller versions, offering an antenna with a maximum allowable gain of 23.5 dBi. Its ultra-fast rotation speed of 60 rpm at ranges up to 2 nautical miles ensures a complete 360-degree sweep every second. The radar has a nominal horizontal beam width of 3.9°, sharpened to 2° with the target separation function in high mode, and a vertical beam width of 22°. It is powered by 10.5–31.2 V DC, with a power consumption of 17–29 W in operation and 3.9 W in standby. IPX6-certified, it is designed to withstand harsh marine environments, with an operating temperature range of -25°C to +55°C. Connectivity is via 100Base-T Ethernet, and it is compatible with Lowrance HDS LIVE multifunction displays.\n\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":55917362348372,"sku":"000-14541-001","price":2258.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15466847797588-1000.jpg?v=1783618686"},{"product_id":"simrad-halo-200x-radar-piedestal-electronique-marine","title":"Simrad HALO 200X radar pedestal only","description":"\u003cp\u003e\n    Designed for coastal and offshore navigation, the \u003cstrong\u003eSimrad HALO 200X Radar Pedestal Only\u003c\/strong\u003e is a 50 W pulse-compression radar system offering performance equivalent to a 12 kW magnetron radar. This unit is intended to be paired with a compatible HALO array antenna, providing clear target detection at ranges from 6 meters to 72 nautical miles.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Technology for Situational Awareness\u003c\/h3\u003e\n\u003cp\u003e\n    The HALO 200X integrates solid-state technology with beam sharpening for improved target separation. It allows simultaneous dual-range operation, useful for monitoring distant weather cells while detecting buoys and other vessels at short range. Its preset operational modes, such as Harbor, Offshore, Weather, and Bird, automatically adjust radar settings for optimal imaging without manual intervention. Rotation speed is adjustable from 16 to 48 RPM depending on the mode.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and Fishing Features\u003c\/h3\u003e\n\u003cp\u003e\n    This Simrad radar pedestal offers advanced safety assistance functions. The VelocityTrack™ Doppler technology uses color coding to indicate target movement direction, facilitating collision threat identification. The system includes dangerous target alerts and the ZoneTrack™ function, allowing tracking of up to 50 targets within two user-defined zones. For fishermen, the Bird Finder mode can detect diving birds, indicators of fish schools, up to six nautical miles away. Compatibility is ensured with Simrad multifunction displays NSS, NSX, NSO, and GO.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":55920769368404,"sku":"000-15762-001","price":4601.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/simrad-halo-200x-radar-pedestal-only_000-15762-001-01.jpg?v=1779463061"},{"product_id":"simrad-radar-12kw-xband-r5000-pedestal","title":"Radar pedestal LAN X-band 12 kW Simrad SRT (R5000)","description":"\u003cp\u003e\n    Designed for high-quality commercial marine radar solutions, the Simrad 12kW X-Band SRT LAN radar pedestal (R5000) is a central component of the Simrad R5000 radar series. This pedestal delivers 12 kW output power in the X-band, operating at a frequency of 9410 ± 30 MHz, and is specifically developed for SOLAS Category 1 and 2 vessels, including high-speed craft (HSC), with the required IMO and U.S. Coast Guard certifications (ARPA, ATA, EPA).\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Performance and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The R5000 pedestal is available as a transceiver at the masthead, simplifying installation and reducing cabling costs. It is compatible with open-array antennas of 6, 9, and 12 feet. Its detection capabilities are characterized by short (80 ns), medium (250 ns), and long (800 ns) pulse lengths, with a pulse repetition frequency (PRF) of 3000 Hz for short pulses. It ensures a minimum range of less than 40 meters and a range discrimination of less than 40 meters, guaranteeing clear imagery even at close range.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    Connectivity to the radar processor is via a thin, easy-to-route Ethernet cable, supporting lengths up to 65 meters. The R5000 system features a modular \"plug \u0026 play\" design enabling scalable installation for single or multi-radar configurations. It can manage up to four radar sensors, four master\/slave displays, and an unlimited number of \"clone\" stations on the network, providing operational flexibility and redundancy. Advanced digital signal processing contributes to superior target detection. For operation in extreme environments, the system can be equipped with antenna group heaters to function down to -40°C. The target tracking capability allows for the instantaneous display of 100 radar targets and background tracking of 2,500 targets. Compared to Simrad’s Halo series recreational radars, the R5000 targets the professional segment with distinct performance and certification requirements for commercial and offshore navigation.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":55920952869204,"sku":"000-14939-001","price":7789.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/manual-web-pedestal-radar-lan-srt-bande-x-12-kw-r5000_000-14939-001-01.webp?v=1779465176"},{"product_id":"raymarine-antenne-radar-quantum-q24d-doppler-cable-10m","title":"Quantum Q24D Doppler Radar Antenna with Power and Data Cable 10m","description":"\u003cp\u003e\n    Designed for coastal and offshore navigation, the Raymarine Quantum Q24D Doppler radar antenna (T70416) is a target detection solution based on solid-state technology. This radome radar integrates Doppler functionality for identifying threatening targets, displayed with a distinct color code on compatible multifunction displays.\n\u003c\/p\u003e\n\u003ch3\u003eDoppler and Solid-State Technology\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum 2 Q24D stands out for its use of Doppler technology, which analyzes the movement of radar echoes relative to the vessel. Approaching targets are highlighted in red, while those moving away are in green, providing immediate and intuitive situational awareness. Unlike traditional magnetron radars, this solid-state model requires no warm-up time and consumes less power, while offering short- and long-range detection comparable or superior to magnetron units, without the wear constraints of magnetrons. This technology positions the Quantum 2 Q24D as an evolution of first-generation Quantum radars, adding a layer of dynamic target analysis.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Integration of the Quantum Q24D radar into a Raymarine navigation system is flexible, thanks to its Wi-Fi or wired connection options via RayNet. The Wi-Fi connection simplifies installation on some vessels by reducing the need for complex cabling. This radar is compatible with Raymarine multifunction displays from the Axiom, Axiom+, Axiom Pro, Axiom XL, and eS and gS series. It is not, however, compatible with the older c, a, e (non-touch), cS, eS (non-touch), gS (non-touch), C Series Widescreen, E Series Widescreen, A Series, C-Series classic, E-Series classic, hsb\/hsb2 Series, SL Series, L Series, RL Series, R Series, RC Series, hsb\/hsb2 Plus Series, or Pathfinder Series. The T70416 model ships with a 10-meter power and data cable to facilitate connection to the vessel's network.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55921685070164,"sku":"T70416","price":2107.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_472bd3d3-4e3e-492d-be00-0164e4364a93.jpg?v=1779477258"},{"product_id":"raymarine-radar-quantum-q24d-doppler-marin","title":"Quantum Q24D Doppler Radar Antenna from Raymarine with Power and Data Cable 15m","description":"\u003cp\u003e\n    Designed for safe navigation, the \u003cstrong\u003eRaymarine Quantum Q24D Doppler\u003c\/strong\u003e radar antenna integrates Doppler technology for detection and classification of maritime targets. This feature allows instant visualization of dangerous targets (approaching) in red and targets moving away in green, providing a rapid assessment of the situation to prevent collisions.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum Q24D radar supports flexible connectivity, either via \u003cstrong\u003eWi-Fi\u003c\/strong\u003e for simplified installation or via a wired \u003cstrong\u003eRayNet\u003c\/strong\u003e link for stable and robust network integration. This versatility ensures compatibility with compatible Raymarine multifunction displays, requiring appropriate software updates to fully utilize its capabilities. It is designed to operate on 12 V or 24 V onboard electrical systems, with precise requirements for inline fuses and thermal circuit breakers. The product is supplied with a 15-meter power and data cable.\n\u003c\/p\u003e\n\u003ch3\u003eTechnological Positioning and Standards\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum Q24D Doppler positions itself as an evolution of Raymarine solid-state radars, surpassing non-Doppler Quantum models with real-time target analysis. Unlike traditional magnetron radars, it offers instant startup and low power consumption. This model complies with European directives 2014\/53\/EU and meets relevant technical standards for marine and radio communication equipment, attesting to its reliability and safety in the marine environment. Installation requires careful attention to placement requirements, including avoiding shadow zones and optimizing Wi-Fi signal performance, as well as respecting \"sniffle holes\" for ventilation.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55921686774100,"sku":"T70417","price":2196.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_629079ef-ca7f-46f5-ad6d-b5662ae6d31c.jpg?v=1779477300"},{"product_id":"raymarine-radar-cyclone-55-watts-antenne-poutre-3ft-raynet","title":"Cyclone 55-Watt Radar with 3' beam antenna and 15m RayNet radar cable","description":"\u003cp\u003e\n    The Raymarine Cyclone 55-Watt radar with a 3-foot beam antenna is a marine detection solution designed to provide detailed visibility of targets in various sailing conditions. This system integrates a 3-foot beam antenna and is powered by 55 watts, ensuring radar range and image clarity for safety at sea. The VCM100 voltage converter module is included, facilitating electrical integration aboard.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Doppler Technology and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Raymarine Cyclone radar benefits from an overview of Doppler technology, enabling improved detection of moving targets. This feature is essential for quickly distinguishing potential hazards from stationary elements, optimizing decision-making at sea, particularly in low-visibility conditions or dense traffic. Integration with the system is ensured via a 15-meter RayNet radar cable, guaranteeing a reliable and fast connection to compatible Raymarine LightHouse multifunction displays.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Compliance and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The Cyclone 55-Watt radar system complies with strict international standards. It is certified to EN IEC 62368-1+A11:2020 for health and safety, IEC 60945:2002 (including Corrigendum 1 of 2008) for electromagnetic compatibility (EMC) in marine environments, and ETSI EN 302 248 V2.1.1 for radio spectrum use. These certifications, along with compliance with Directive 2014\/53\/EU, attest to the product's reliability and robustness in demanding marine environments. It is designed to operate with compatible multifunction displays and can be configured for ARPA target acquisition, subject to specific software requirements.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55921738514772,"sku":"T70491","price":5914.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_2bacce7c-f744-473f-9829-00d12c8142f6.jpg?v=1779477895"},{"product_id":"raymarine-radar-cyclone-55w-antenne-poutre-4ft-raynet","title":"Cyclone 55-Watt Radar with 4-foot beam antenna and 15m RayNet radar cable","description":"\u003cp\u003e\n    Designed for demanding maritime navigation, the Raymarine Cyclone 55-Watt radar, part number T70492, provides advanced detection with its 4-foot beam antenna and 15-meter RayNet radar cable. This system integrates into the Cyclone series, known for its signal processing capabilities and broad compatibility with Raymarine multifunction displays. It is positioned as a choice for recreational boaters and professionals seeking reliable surveillance and modern radar features.\n\u003c\/p\u003e\n\u003ch3\u003eDoppler Technology and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Cyclone radar incorporates Doppler capabilities, enabling more intuitive identification of moving targets versus stationary ones. This feature enhances situational awareness by quickly distinguishing potential collision threats. The system architecture relies on the VCM100 voltage converter module, which manages the radar pedestal’s power supply. Integration into the onboard network is achieved via the 15-meter RayNet cable, ensuring reliable Ethernet connectivity with compatible Raymarine multifunction displays, particularly those running LightHouse software.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the Cyclone T70492 radar requires adherence to placement guidelines to optimize performance and compass safe-distance requirements. The antenna pedestal and VCM100 module must be mounted while considering wiring requirements, including cable types, lengths, routing, and shielding. Initial power-up checks and alignment adjustments are outlined to ensure correct operation. In terms of power, the radar delivers a 55-Watt output, and its 4-foot beam antenna is sized for a detection range suitable for various maritime applications.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55921740415316,"sku":"T70492","price":5996.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_114cdef2-ffb3-4dd1-9bb6-f75c50540944.jpg?v=1779477938"},{"product_id":"raymarine-radar-cyclone-55-watts-antenne-poutre-6-pieds","title":"Cyclone 55W Radar with 6' open array antenna and 15m RayNet radar cable","description":"\u003cp\u003e\n    The Raymarine Cyclone 55W radar, featuring a 6-foot open array antenna and a 15-meter RayNet cable, is designed for long-range maritime detection and precise target recognition. Positioned in Raymarine’s open array range, it delivers 55 watts of transmit power—higher than dome models like the Quantum 2—and is intended for vessels requiring extended range and improved target separation in varied conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eDoppler Technology and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This radar system integrates Doppler technology, enabling rapid and intuitive identification of moving targets, whether approaching or receding. The Cyclone 55W is compatible with Raymarine LightHouse multifunction displays, ensuring seamless integration and access to advanced features such as ARPA target acquisition. The package includes the VCM100 voltage converter module and a 15-meter RayNet cable for a complete installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    With its 6-foot open array antenna, the Raymarine Cyclone 55W improves angular resolution, delivering a detailed radar image essential for navigation in congested waters or low-visibility conditions. Its design is optimized for consistent performance, outperforming lower-power radars by maintaining reliable detection even in adverse weather. It serves as an intermediate solution between compact dome radars and very high-power open array systems.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55921741627732,"sku":"T70493","price":6570.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_b7a0315b-e96c-429a-8576-bf793a2d3eae.jpg?v=1779477974"},{"product_id":"raymarine-radar-cyclone-pro-110w-antenne-3ft-raynet","title":"Cyclone Pro 110 Watts Radar with 3' beam antenna and 15m RayNet radar cable","description":"\u003cp\u003e\n    Designed for demanding navigation, the \u003cstrong translate=\"no\"\u003eRaymarine Cyclone Pro 110 Watts\u003c\/strong\u003e radar (reference \u003cstrong translate=\"no\"\u003eT70494\u003c\/strong\u003e) is an advanced marine detection solution. This system integrates a \u003cstrong translate=\"no\"\u003eCyclone Pro\u003c\/strong\u003e pedestal and a 3-foot beam antenna for precise target acquisition. Its 110-watt transmission power makes it a high-performance tool for vessels requiring superior range and image clarity, including in challenging weather conditions or high-traffic areas.\n\u003c\/p\u003e\n\u003ch3\u003eSystem integration and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong translate=\"no\"\u003eCyclone Pro 110 Watts Radar\u003c\/strong\u003e relies on the \u003cstrong translate=\"no\"\u003eVCM100\u003c\/strong\u003e voltage converter module, essential for its operation and integration. Connection to the onboard network is via the included \u003cstrong translate=\"no\"\u003e15-meter RayNet cable\u003c\/strong\u003e, ensuring fast and reliable data transmission to compatible \u003cstrong translate=\"no\"\u003eRaymarine\u003c\/strong\u003e multifunction displays, particularly those in the \u003cstrong translate=\"no\"\u003eLightHouse\u003c\/strong\u003e series. This radar is compatible with \u003cstrong translate=\"no\"\u003eDoppler\u003c\/strong\u003e and \u003cstrong translate=\"no\"\u003eARPA\u003c\/strong\u003e features, subject to MFD software requirements, enabling dynamic analysis of moving targets and collision avoidance assistance.\n\u003c\/p\u003e\n\u003ch3\u003eCompliance and reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong translate=\"no\"\u003eRaymarine Cyclone Pro\u003c\/strong\u003e system complies with international safety and electromagnetic compatibility standards. It meets the \u003cstrong translate=\"no\"\u003e2014\/53\/EU\u003c\/strong\u003e directives, with tests conducted per \u003cstrong translate=\"no\"\u003eEN IEC 62368-1+A11:2020\u003c\/strong\u003e for health and safety, \u003cstrong translate=\"no\"\u003eIEC 60945:2002\u003c\/strong\u003e for \u003cstrong translate=\"no\"\u003eEMC\u003c\/strong\u003e, and \u003cstrong translate=\"no\"\u003eETSI EN 302 248 V2.1.1\u003c\/strong\u003e for spectrum use. These certifications, including \u003cstrong translate=\"no\"\u003eFCC\u003c\/strong\u003e and \u003cstrong translate=\"no\"\u003eISED Canada\u003c\/strong\u003e, confirm its design for safe and reliable marine use. Precise positioning of the antenna and \u003cstrong translate=\"no\"\u003eVCM100\u003c\/strong\u003e is critical to ensure safe compass distances and optimize performance.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55921742545236,"sku":"T70494","price":7145.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_a874adfb-9b4e-43bc-a260-0605c9c413fc.jpg?v=1779478005"},{"product_id":"raymarine-radar-cyclone-pro-110w-antenne-poutre-4ft-raynet","title":"Radar Cyclone Pro 110 Watts with 4' beam antenna and 15m RayNet radar cable","description":"\u003cp\u003e\n    Designed for demanding sailors, the Raymarine Cyclone Pro 110 Watts radar, part number T70495, is an advanced detection solution. It integrates with the RayNet network and stands out from standard Cyclone models with its 110-watt transmission power, providing increased range and clarity for target detection. This model comes with a 4-foot beam antenna and a 15-meter RayNet radar cable, ensuring flexible installation for various vessel types.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnologies and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Cyclone Pro radar integrates Doppler technology, enabling rapid identification of moving targets and improved situational awareness. This feature is particularly useful for navigation in high-traffic areas or reduced visibility. For optimal operation, this radar requires compatible Raymarine multifunction displays (MFD), including those running LightHouse software for ARPA functions. The system includes a VCM100 voltage converter module, essential for power supply and signal management, ensuring stable and reliable electrical integration with the onboard system.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning within the Raymarine range\u003c\/h3\u003e\n\u003cp\u003e\n    The Cyclone Pro 110 Watts is positioned as the most powerful model in the Cyclone range, targeting users requiring maximum radar performance. While Raymarine’s Quantum radars are recognized for their CHIRP pulse-compression technology and lightweight design, the Cyclone Pro series, with its beam antenna and 110-watt power, offers longer-range detection and superior target discrimination, suitable for large vessels and challenging maritime conditions. Compared to other open-array radars on the market, the Cyclone Pro stands out for its RayNet network integration and advanced Doppler capabilities, making it relevant for installations requiring full synergy with the Raymarine ecosystem.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55921748836692,"sku":"T70495","price":8297.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_4774bd17-f5b6-466b-9daa-d42897c22bc1.jpg?v=1779478045"},{"product_id":"raymarine-radar-cyclone-pro-110w-antenne-poutre-6ft-raynet","title":"Cyclone Pro 110 Watts Radar with 6' beam antenna and 15m RayNet radar cable","description":"\u003cp\u003e\n    Designed for long-range detection and targeted reconnaissance, the Raymarine Cyclone Pro 110 Watts radar with a 6-foot beam antenna (T70496) represents an advanced solution for demanding navigation. This system integrates a 6-foot beam antenna offering angular resolution suited to medium to large vessels, and 110 Watts of power for extended detection range. The Pro model stands out with improved signal processing capabilities and Doppler features for better interpretation of moving targets. It comes with a 15-meter RayNet radar cable for direct network integration.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The Cyclone Pro 110 Watts with a 6-foot antenna falls within Raymarine’s open-array radar range, positioning itself as a mid-to-high power option compared to the 55 Watts Cyclone Pro models, and below the 220 Watts models. The 6-foot antenna provides a balance between compactness and performance, outperforming 4-foot antennas in resolution while being more manageable than 8-foot versions for certain vessel types. This configuration is ideal for yachts, offshore cruising sailboats, and small workboats requiring reliable and precise detection in various sea conditions. The integration of Doppler technology enables rapid identification of hazardous targets by their relative motion.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The Cyclone Pro system requires a VCM100 voltage converter module for power supply, included in the pack. Its RayNet connectivity ensures native compatibility with Raymarine multifunction displays (MFD) from the Axiom, Axiom Pro, and Axiom XL series, as well as other LightHouse-compatible MFDs, for smooth visualization and control. ARPA software requirements are specified for target acquisition and tracking, ensuring optimized situational awareness. Regular software updates are recommended to benefit from the latest performance and security improvements. This radar is an alternative to competing offerings such as Garmin’s Fantom radars or Furuno’s DRS-NXT, providing its own suite of image processing and Doppler detection technologies.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55921751032148,"sku":"T70496","price":8009.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_67920031-84f2-4bc1-a573-5c463c5f6097.jpg?v=1779478075"},{"product_id":"raymarine-quantum-q24d-doppler-radar-antenne-radome-noir","title":"Black Raymarine Quantum Q24D Doppler radar antenna with power and data cable 10m","description":"\u003cp\u003e\n    Designed for modern navigation, the Raymarine Quantum Q24D Doppler radar antenna (reference T70549) integrates CHIRP pulse-compression technology and Doppler target processing. This radar solution provides precise echo detection and instant identification of moving targets, differentiating threats by color code for improved situational awareness.\n\u003c\/p\u003e\n\u003ch3\u003eDoppler and CHIRP technology\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum Q24D differs from traditional magnetron radars with its CHIRP pulse-compression technology, which ensures high image resolution at short and long ranges with reduced power consumption. The integration of Doppler enables real-time analysis of target movements: approaching echoes are displayed in red, while receding ones appear in green. This feature enhances safety at sea, particularly in high-traffic areas or reduced visibility. Compared to the first generation of Quantum radars, the Q24D adds this essential Doppler layer, providing significant added value for rapid decision-making.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum Q24D is designed for flexible installation, allowing simplified connection via Wi-Fi to a compatible Raymarine multifunction display, or via a RayNet wired connection for full network integration. This dual option facilitates integration on different types of vessels, from sailboats to powerboats. The radome comes with a 10-meter power and data cable, simplifying the installation process. Regular software updates are available on the Raymarine website to ensure optimal performance and access to the latest features.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55921752899924,"sku":"T70549","price":2189.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_366ae53b-568f-4f39-a8c2-ad8d3e75b398.jpg?v=1779478223"},{"product_id":"raymarine-radar-quantum-q24d-doppler-antenne-cable-15m","title":"Black radar antenna Quantum Q24D Doppler with power and data cable 15m","description":"\u003cp\u003e\n    Designed for advanced target detection at sea, the Raymarine Quantum Q24D Doppler black radar antenna, part number T70550, is an integrated navigation solution. This Quantum 2 series radome radar integrates Doppler technology for precise motion analysis. It connects to compatible Raymarine multifunction displays, offering flexible connectivity via RayNet wired or Wi-Fi.\n\u003c\/p\u003e\n\u003ch3\u003eDoppler Technology and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Quantum Q24D Doppler stands out from traditional radars by its ability to identify moving targets with increased clarity. This feature is crucial for improving situational awareness and collision avoidance. The unit is supplied with a 15-meter power cable and data cable, facilitating installation on various vessel types. Compatibility with Raymarine multifunction displays is required to fully utilize the radar’s capabilities, including software updates necessary to maintain optimal system performance.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the Quantum Q24D Doppler radar requires adherence to detailed mounting and wiring guidelines provided in the documentation. Specific considerations apply to antenna positioning, particularly to avoid shadow zones and optimize Wi-Fi reception if this connection option is selected. The product complies with regulatory standards mentioned in its technical documentation, such as IEEE, ICNIRP, FCC, and MSIP, ensuring its safety and electromagnetic compatibility in the marine environment.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"","offer_id":55921753882964,"sku":"T70550","price":2437.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_73023e9a-b83d-4329-94ae-2df4ee1e8e60.jpg?v=1779478266"},{"product_id":"garmin-gmr-1224-1226-xhd2-pedestal-radar-marine","title":"GMR™ 1224\/1226 xHD2 radar pedestal","description":"\u003cp\u003e\n    Designed for demanding sailors aboard large yachts and sport fishing boats, Garmin’s \u003cstrong\u003eGMR™ 1224\/1226 xHD2 radar pedestal\u003c\/strong\u003e is the core of 12 kW open-array high-definition radar systems. This pedestal integrates xHD2 technology, capable of generating high-resolution radar images with a maximum range of 72 nautical miles (133 km).\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced Performance and Image Processing\u003c\/h3\u003e\n\u003cp\u003e\n    The Garmin GMR 1224\/1226 xHD2 pedestal delivers 12 kW of transmit power, ensuring reliable detection and improved target separation. It supports dual rotation speeds of 24 and 48 RPM for rapid radar image updates, essential in dynamic environments. The 8-bit true-color display enables precise differentiation of targets and enhances separation, providing superior clarity compared to entry-level systems or low-power dome radars. This system outperforms 4 kW or 6 kW GMR xHD2 models, such as the GMR 424\/426 xHD2, in range and detection capability.\n\u003c\/p\u003e\n\u003ch3\u003eSpecific Features for Navigation and Fishing\u003c\/h3\u003e\n\u003cp\u003e\n    This pedestal serves as the foundation for advanced software features. The \"Bird Mode\" automatically adjusts sensitivity to locate flocks of birds, indicating potential fish schools. The \"Dual Range\" function allows simultaneous display of short- and long-range radar returns on a split screen. The \"Dynamic Auto Gain\" and \"Dynamic Sea Filter\" filters automatically adjust gain and sea clutter rejection to optimize performance in varying sea conditions. The MARPA (Mini-Automatic Radar Plotting Aid) function enables tracking of up to 30 selected targets, aiding in collision threat identification. \"Radar Overlay\" superimposes radar images directly onto the marine chart of a compatible chartplotter, while \"Echo Trails\" display the historical movement of targets. Dual radar support provides redundancy and display flexibility. Tools such as VRM (Variable Range Markers) and EBL (Electronic Bearing Lines) are included for quick distance and bearing measurements. The pedestal is rated IPX6 for water resistance, handling powerful water jets, and operates on 10–32V DC systems, with a rotation noise level below 58 dB SPL.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55967478645076,"sku":"010-01333-02","price":4443.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-010-01333-02.jpg?v=1779970228"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/radars.png?v=1774539372","url":"https:\/\/skysat.fr\/en-us\/collections\/radars.oembed","provider":"Skysat","version":"1.0","type":"link"}