{"title":"Rebelcell","description":"\u003cp\u003eDécouvrez la sélection Rebelcell pour l’énergie à bord et le kayak : batteries LiFePO4 EDGE 12 et 24 V, Outdoorbox, chargeurs dédiés et connectique.\u003c\/p\u003e\u003cp\u003eLes compatibilités dépendent de la tension, du courant, du BMS, du chargeur et du câblage. Pour une propulsion Garmin Force Current, vérifiez notamment la protection 40 A, la longueur et la section des câbles, les connecteurs et la fixation. L’alimentation d’un sondeur doit être dimensionnée séparément.\u003c\/p\u003e","products":[{"product_id":"rebelcell-batterie-lifepo4-24v75-edge-25-6v-75ah-ip66","title":"Rebelcell 24V75 EDGE LiFePO4 battery 25.6 V 75 Ah IP66","description":"\u003cp\u003eThe \u003cstrong\u003eRebelcell 24V75 EDGE\u003c\/strong\u003e is a 25.6 V, 75 Ah LiFePO4 battery, delivering 1.92 kWh of nominal energy. It is designed for 24 V marine installations requiring high energy reserves in a compact format, particularly for bow thrusters.\u003c\/p\u003e\n\u003ch3\u003eA compact and powerful 24 V power supply\u003c\/h3\u003e\n\u003cp\u003eThe integrated BMS accepts 100 A continuous discharge and up to 200 A for less than 5 seconds. The IP66 housing measures 330 x 175 x 214 mm and weighs 13.5 kg. Bluetooth connectivity allows monitoring the battery status via the Rebelcell app.\u003c\/p\u003e\n\u003ch3\u003eCompatibility with Garmin Force Current\u003c\/h3\u003e\n\u003cp\u003eThe electrical specifications of the 24V75 EDGE align with a 24 V Garmin Force Current installation: Garmin specifies a 10–32 V DC power supply and a measured maximum consumption of 32.8 A at 25.6 V. Actual autonomy depends on power demand, sailing conditions, temperature, and wiring.\u003c\/p\u003e\n\u003ch3\u003eCharging and installation\u003c\/h3\u003e\n\u003cp\u003eUse a compatible 29.2 V DC CC\/CV LiFePO4 charger with a maximum charging current of 35 A. Terminals are M8 format. Provide appropriate electrical protection and cable cross-sections for the installation’s current rating. Up to four batteries can be connected in parallel and two in series, strictly following the manufacturer’s instructions.\u003c\/p\u003e\n\u003ch3\u003eRegulated shipping\u003c\/h3\u003e\n\u003cp\u003eThis 1.92 kWh battery falls under UN3480, Class 9 dangerous goods transport regulations. Online ordering is available; Skysat confirms shipping conditions and delivery time based on destination before dispatch.\u003c\/p\u003e","brand":"Rebelcell","offers":[{"title":"Default Title","offer_id":57143584096596,"sku":"24075RCEDGE","price":775.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/rebelcell-24v75-edge-vue-generale.jpg?v=1789404900"},{"product_id":"rebelcell-chargeur-lifepo4-29-2v-20a-etanche-ip65","title":"Rebelcell 29.2 V \/ 20 A LiFePO4 Charger IP65 Waterproof","description":"\u003cp\u003eThe \u003cstrong\u003eRebelcell WC29V20EDGE charger\u003c\/strong\u003e is designed for charging 24 V EDGE LiFePO4 batteries. It delivers a charge voltage of 29.2 V and a maximum current of 20 A, with a maximum output power of 600 W.\u003c\/p\u003e\n\u003ch3\u003eDedicated charging for 24 V EDGE batteries\u003c\/h3\u003e\n\u003cp\u003eIts CC\/CV charging profile is adapted to LiFePO4 chemistry. For a Rebelcell 24V75 EDGE battery, the manufacturer indicates a charging time of approximately 5 to 6 hours. The M8 eyelet terminals connect directly to the battery terminals.\u003c\/p\u003e\n\u003ch3\u003eIP65 waterproof housing\u003c\/h3\u003e\n\u003cp\u003eThe IP65 housing protects the charger against dust and water splashes. Integrated ventilation contributes to its cooling. The device operates on a 180 to 240 V AC mains supply.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstall the charger in a ventilated location and in compliance with the manufacturer's instructions. Check the battery reference before connection: this model provides 29.2 V and must only be used with a compatible LiFePO4 battery.\u003c\/p\u003e","brand":"Rebelcell","offers":[{"title":"Default Title","offer_id":57144372756820,"sku":"WC29V20EDGE","price":232.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/rebelcell-wc29v20edge-chargeur-vue-generale.jpg?v=1789410978"},{"product_id":"rebelcell-connecteur-anen-sa50-gris-50a","title":"Rebelcell ANEN SA50 gray connector 50 A","description":"\u003cp\u003eThe \u003cstrong\u003eRebelcell ANEN SA50 gray connector\u003c\/strong\u003e enables quick and detachable electrical connections in 12 V or 24 V systems. It is rated for 50 A and accepts conductors up to 16 mm².\u003c\/p\u003e\n\u003ch3\u003eDetachable connection for power supply\u003c\/h3\u003e\n\u003cp\u003eThe gray housing is intended for 12 V and 24 V lithium installations following Rebelcell color coding. The connector is genderless: two identical connectors mate to form a complete connection.\u003c\/p\u003e\n\u003ch3\u003eSold individually\u003c\/h3\u003e\n\u003cp\u003eThis listing refers to \u003cstrong\u003eone connector\u003c\/strong\u003e. Order two units to create a complete connection, one at the battery side and one at the equipment or harness side.\u003c\/p\u003e\n\u003ch3\u003eSizing\u003c\/h3\u003e\n\u003cp\u003eNominal current is 50 A, maximum voltage 600 V, and acceptable cable cross-section up to 16 mm². Cross-section, protection, and crimping must be sized for the actual current of the installation.","brand":"Rebelcell","offers":[{"title":"Default Title","offer_id":57144389337428,"sku":"60050REEV1C","price":7.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/rebelcell-60050reev1c-connecteur-anen-sa50-gris.jpg?v=1789411369"},{"product_id":"rebelcell-batterie-12v75-edge-lifepo4-75ah","title":"Rebelcell 12V75 EDGE LiFePO4 Battery 12.8 V 75 Ah","description":"\u003cp\u003eThe \u003cstrong\u003eRebelcell 12V75 EDGE\u003c\/strong\u003e is a 12.8 V 75 Ah LiFePO4 battery, providing 960 Wh of nominal energy. It can supply separate power to a compatible 12 V fishfinder, after circuit dimensioning. If the 24 V Garmin Force Current propulsion is chosen, its power supply remains distinct; this motor also accepts 12 V propulsion.\u003c\/p\u003e\n\u003ch3\u003eBattery Reserve and Monitoring\u003c\/h3\u003e\u003cp\u003eThe manufacturer specifies a maximum continuous discharge of 100 A, an IP66 enclosure, a net mass of 6.9 kg, and Bluetooth monitoring via its application. The battery measures 260 × 168 × 209 mm.\u003c\/p\u003e\n\u003ch3\u003eForce Current at 12 V: Electrical Compatibility to be Validated\u003c\/h3\u003e\u003cp\u003eThe Force Current versions \u003ca href=\"\/en-us\/products\/garmin-force-current-moteur-kayak-pedales\"\u003ewith pedals\u003c\/a\u003e and \u003ca href=\"\/en-us\/products\/garmin-force-current-moteur-electrique-traine-peche\"\u003ewithout pedals\u003c\/a\u003e also accept a nominal 12 V battery (motor input 10 to 32 VDC). The 12V75 EDGE supports 100 A continuous discharge and can be considered for 12 V propulsion. This is neither a Garmin certification nor a universal setup: plan for a 40 A continuous protection, at least 32 VDC, on the positive terminal, then validate M8 lugs, connectors, round-trip lengths, cable cross-sections, mounting, and available space. If this battery powers a fishfinder instead, its circuit is dimensioned separately from the propulsion.\u003c\/p\u003e\n\u003ch3\u003eInstallation on a Kayak\u003c\/h3\u003e\u003cp\u003eThe M8 threaded terminals require suitable lugs. Plan for circuit protection dimensioned according to the exact fishfinder model, other loads, and cable cross-section. Although the battery is IP66, Rebelcell recommends placing it out of standing water. The location and mounting on the kayak must be validated by measurement.\u003c\/p\u003e\n\u003ch3\u003eCharging\u003c\/h3\u003e\u003cp\u003eUse a compatible 12 V LiFePO4 charger with a 14.6 V CC\/CV profile. A 29.2 V charger intended for a 24 V propulsion battery, if that architecture is chosen, is not suitable for this 12 V battery.\u003c\/p\u003e\n\u003ch3\u003eRegulated Delivery\u003c\/h3\u003e\u003cp\u003eThis lithium battery falls under Class 9, UN3480. Skysat confirms delivery conditions according to the destination before shipment.\u003c\/p\u003e","brand":"Rebelcell","offers":[{"title":"Default Title","offer_id":57170040324436,"sku":"12075RCEDGE","price":387.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/rebelcell-12075rcedge-12v75-edge.webp?v=1789563243"},{"product_id":"rebelcell-chargeur-lifepo4-14-6v-20a-etanche-ip65","title":"Rebelcell LiFePO4 Charger 14.6 V 20 A IP65","description":"\u003cp\u003eThe \u003cstrong\u003eRebelcell WC14V20REPR charger\u003c\/strong\u003e recharges Rebelcell LiFePO4 12 V EDGE and PRO batteries with a 14.6 V output and a maximum current of 20 A. Its IP65 casing is suitable for fixed installation onboard, in a ventilated area.\u003c\/p\u003e\n\u003ch3\u003eSuitable for 12V75 EDGE\u003c\/h3\u003e\u003cp\u003eThe manufacturer states approximately 4 to 5 hours of charging time for the 12V75 EDGE. Connection to the battery is via M8 eyelet terminals. This 14.6 V charger is not suitable for a 24 V propulsion battery. The Garmin Force Current accepts 12 or 24 V power; the charger must match the chosen battery, not the motor.\u003c\/p\u003e\n\u003ch3\u003eProtection and Installation\u003c\/h3\u003e\u003cp\u003eThe pre-charge\/CC\/CV\/cut-off charging profile automatically stops charging when complete. The charger is protected against reverse polarity, short circuits, overvoltage, and overheating. IP65 means dustproof and resistant to water jets, not submersible. Do not cover the fan and follow the manufacturer's fastening and connection instructions.\u003c\/p\u003e\n\u003ch3\u003ePower Supply and Dimensions\u003c\/h3\u003e\u003cp\u003e230 V AC power supply, 50\/60 Hz; dimensions 230 × 135 × 80 mm. Charger weight 2.6 kg and packaged weight indicated by Rebelcell 2.9 kg.\u003c\/p\u003e","brand":"Rebelcell","offers":[{"title":"Default Title","offer_id":57170149212500,"sku":"WC14V20REPR","price":232.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/rebelcell-wc14v20repr-vue-generale.jpg?v=1789564488"},{"product_id":"rebelcell-outdoorbox-12v45-edge","title":"Outdoorbox 12V45 EDGE LiFePO4 12.8 V 45 Ah","description":"\u003cp\u003eThe \u003cstrong\u003eRebelcell 45 Ah EDGE Outdoorbox\u003c\/strong\u003e combines a 12.8 V 576 Wh LiFePO4 battery, a BMS, and a stated maximum continuous discharge of 100 A, with two yellow Anderson SB50 connectors. Its IP66 rating allows for use in rain, but not immersion.\u003c\/p\u003e\u003cp\u003eCharging is done with the Rebelcell LC14V20XT60 14.6 V \/ 20 A charger via a suitable XT60 to yellow SB50 cable; the maximum charging current for this battery is 20 A. The charger must remain indoors, dry and ventilated.\u003c\/p\u003e\u003cp\u003eA propulsion installation requires verification specific to the motor and kayak: connectors, cable cross-section and length, protection, and mounting. The fishfinder circuit is sized separately according to the exact device. No universal autonomy or mounting compatibility is guaranteed.\u003c\/p\u003e","brand":"Rebelcell","offers":[{"title":"Default Title","offer_id":57198136164692,"sku":"ODB1245EDGE","price":379.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/Rebelcell_ODB1245EDGE_overview_A.jpg?v=1789721504"},{"product_id":"rebelcell-outdoorbox-12v75-edge","title":"Outdoorbox 12V75 EDGE LiFePO4 12.8 V 75 Ah","description":"\u003cp\u003eThe \u003cstrong\u003eRebelcell 75 Ah EDGE Outdoorbox\u003c\/strong\u003e combines a 12.8 V 960 Wh LiFePO4 battery, a BMS, and a stated maximum continuous discharge of 100 A, with two yellow Anderson SB50 connectors. Its IP66 rating allows for use in rain, but not immersion.\u003c\/p\u003e\u003cp\u003eCharging is done with the Rebelcell LC14V20XT60 14.6 V \/ 20 A charger via a suitable XT60 to yellow SB50 cable; the maximum charging current for this battery is 35 A. The charger must remain indoors, dry and ventilated.\u003c\/p\u003e\u003cp\u003eA propulsion installation requires verification specific to the motor and kayak: connectors, cable gauge and length, protection and mounting. The fishfinder circuit is sized separately according to the exact device. No universal autonomy or mounting compatibility is guaranteed.\u003c\/p\u003e","brand":"Rebelcell","offers":[{"title":"Default Title","offer_id":57198145929556,"sku":"ODB1275EDGE","price":585.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/Rebelcell_ODB1275EDGE_overview_A.jpg?v=1789721622"},{"product_id":"rebelcell-chargeur-14-6v-20a-xt60","title":"14.6 V \/ 20 A LiFePO4 Charger XT60","description":"\u003cp\u003eThe \u003cstrong\u003eRebelcell LC14V20XT60\u003c\/strong\u003e charges the Outdoorbox 12V45 EDGE and 12V75 EDGE with a 14.6 V \/ 20 A LiFePO4 profile. Rebelcell specifies two separate cables: female XT60 to M8 lugs and female XT60 to yellow ANEN connector for the Outdoorbox EDGE. Verify the items actually delivered upon receipt.\u003c\/p\u003e\u003cp\u003eThis ventilated charger is intended for a dry, ventilated indoor space only: it is neither waterproof nor designed for permanent onboard mounting. Do not use a 12.6 V charger for these LiFePO4 Outdoorboxes.\u003c\/p\u003e","brand":"Rebelcell","offers":[{"title":"Default Title","offer_id":57198149828948,"sku":"LC14V20XT60","price":140.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/Rebelcell_LC14V20XT60_top_side_overview_A-2.jpg?v=1789721673"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/rebelcell-logo-300.png?v=1790677981","url":"https:\/\/skysat.fr\/en-us\/collections\/rebelcell.oembed","provider":"Skysat","version":"1.0","type":"link"}