{"title":"Adhesive probes","description":"\u003ch2\u003e Adhesive probes: a discreet and efficient installation\u003c\/h2\u003e\n\n\n\u003cp\u003e Stick-on transducers are an ideal solution for boats whose hull design doesn't allow or justify drilling for a through-hull transducer. At Skysat, we understand the importance of a high-quality signal for fishing and navigation, even without an intrusive installation. Discover our selection of stick-on transducers, rigorously tested for performance and reliability.\u003c\/p\u003e\n\n\n\u003ch2\u003e advantages of adhesive probes\u003c\/h2\u003e\n\n\n \u003cp\u003eBonded transducers offer a practical and less cumbersome alternative to traditional through-hull transducers. Installation takes place inside the hull, eliminating the need for drilling and the potential risk of water ingress. They are particularly well-suited to slender hulls or boats where drilling is not recommended.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eEase of installation:\u003c\/strong\u003e No drilling of the case, simplified and quick installation.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAdaptability:\u003c\/strong\u003e Suitable for a wide range of hulls (fiberglass, aluminum).\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eReduced maintenance:\u003c\/strong\u003e No risk of soiling or external corrosion.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHull integrity:\u003c\/strong\u003e Preserves the watertightness and structure of the boat.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e choose the right probe to stick on\u003c\/h2\u003e\n\n\n \u003cp\u003eThe choice of a bonded probe depends on several factors, including the hull material, the desired depth, and the required functionalities (temperature, speed). A thorough understanding of the technical specifications is crucial to ensure optimal performance. Particular attention should be paid to the type of adhesive used and the preparation of the bonding surface.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCase type:\u003c\/strong\u003e Check compatibility with the case material (maximum thickness).\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eFrequency:\u003c\/strong\u003e Choose the frequency appropriate for the depth and type of seabed. Higher frequencies offer better resolution but a shorter range.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePower:\u003c\/strong\u003e Determines the maximum detection depth. Higher power is needed for deep water.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eConnectivity:\u003c\/strong\u003e Ensure compatibility with your multifunction display (NMEA 0183, NMEA 2000).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e installation and performance\u003c\/h2\u003e\n\n\n \u003cp\u003eProper installation is essential to ensure the performance of an adhesive transducer. The chosen location must be free of air bubbles and any structural interference. The use of a coupling fluid (mineral oil or glycerin) is often recommended to improve signal transmission. Hull thickness can affect transducer sensitivity. Testing is necessary to validate the installation and adjust the sounder settings.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSurface preparation:\u003c\/strong\u003e Meticulous cleaning and degreasing of the bonding area.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCoupling fluid:\u003c\/strong\u003e Use of a suitable liquid to optimize wave transmission.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePositioning:\u003c\/strong\u003e Choose a location without interference and with a suitable shell thickness.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCalibration:\u003c\/strong\u003e Adjust the sonar settings to compensate for signal attenuation due to the hull.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cstrong\u003eSkysat's advice\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eBefore permanently attaching your transducer, perform some tests while navigating with the transducer simply held in place with masking tape. This will allow you to validate the positioning and adjust the fishfinder settings before proceeding with the final installation.\u003c\/p\u003e","products":[{"product_id":"raymarine-sonde-a-coller-cpt-s-high-chirp-6m","title":"High Chirp conical beam adhesive probe, 0\/12\/20° angle, CPT-S, 6m cable","description":"\u003cp\u003eThe Raymarine CPT-S High CHIRP glue-on transducer delivers exceptional underwater detection performance without compromising your hull’s integrity. Specifically engineered for fiberglass boats, this in-hull transducer eliminates the risk of leaks and hydrodynamic drag associated with through-hull or transom-mount transducers. Its High CHIRP conical beam technology ensures excellent target separation and precise bottom tracking, ideal for fishing and coastal navigation.\u003c\/p\u003e\n\u003ch3\u003eOptimal adaptability and integration\u003c\/h3\u003e\n\u003cp\u003eUnlike standard models, this CPT-S variant is designed to perfectly match your hull’s geometry. It accommodates deadrise angles of 0°, 12°, and 20°, ensuring the acoustic beam points vertically downward for reliable echo returns. Supplied with a 6-meter cable, it integrates easily into small and medium-sized display units. Compared to more complex Raymarine transducer models, the CPT-S offers an affordable and highly effective solution for navigators seeking the precision of traditional CHIRP sonar with a no-drill installation.","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723806466388,"sku":"A80691","price":132.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-12506586120532-1000.jpg?v=1783617087"},{"product_id":"garmin-pack-sondes-gt36-tm-gt8hw-ih-tableau-arriere-interne","title":"Garmin GT36-TM and GT8HW-IH transducer pack","description":"\u003cp\u003e\n    The Garmin GT36-TM and GT8HW-IH transducer pack is designed to provide a complete and optimized sonar solution, targeting recreational boaters and anglers seeking both reliable high-speed depth detection and detailed imaging of structures and fish. This bundle is particularly suited to boats with fiberglass hulls.\n\u003c\/p\u003e\n\u003ch3\u003eGarmin GT36-TM transducer: Precision UHD imaging\u003c\/h3\u003e\n\u003cp\u003e\n    The GT36-TM transducer, intended for transom or electric motor mounting, integrates Garmin’s Ultra High-Definition ClearVü and SideVü scanning sonar technologies. It operates on CHIRP frequencies of 455 kHz (425–485 kHz), 800 kHz (790–850 kHz), and 1000 kHz (940–1100 kHz), with a power output of 500 W. This versatility delivers clear, distinct images of the seafloor and targets, with a maximum depth of 400 ft in ClearVü and 500 ft in SideVü. High-contrast color palettes enhance structure identification. Its narrow beam (0.52° x 52° at 1000 kHz) ensures fine resolution. Unlike traditional transducers focused on vertical depth, the GT36-TM excels in lateral and under-boat visualization with high detail, comparable to Garmin’s premium UHD range.\n\u003c\/p\u003e\n\u003ch3\u003eGarmin GT8HW-IH transducer: High-speed performance\u003c\/h3\u003e\n\u003cp\u003e\n    The GT8HW-IH is an in-hull through-hull transducer designed specifically for fiberglass hulls. It delivers a traditional high-frequency, broadband CHIRP sonar (145–230 kHz) with a power output of 250 W. Its in-hull design, requiring no hull penetration, makes it ideal for boats unable to accommodate an external transducer or those needing accurate depth readings at high speeds, up to 800 ft in freshwater. It is compatible with hull deadrise angles from 0° to 6°. This transducer is particularly valued on bass boats or other high-speed craft where external transducer cavitation can degrade performance, offering a reliable alternative to transom-mount transducers like the GT36-TM for primary depth reading.\n\u003c\/p\u003e\n\u003ch3\u003eGarmin pack integration and positioning\u003c\/h3\u003e\n\u003cp\u003e\n    This pack cleverly combines the strengths of two complementary transducer types via a Y-cable (12-pin and 8-pin to 12-pin sounder adapter included). The GT8HW-IH provides consistent, reliable depth data even at top speed, without generating drag or turbulence, while being protected from impacts. Meanwhile, the GT36-TM offers a panoramic, detailed underwater view for fishing and navigation at moderate speeds. This combination outperforms the capabilities of a single multifunction transducer that would have to compromise between high-speed performance and detailed imaging. The pack targets demanding users who want the best of both worlds without trade-offs, positioning this Garmin offering as a top-tier solution for in-depth knowledge of their boat’s underwater environment.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860333904212,"sku":"010-02536-00","price":400.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_721452e2-b551-455b-a85e-758a10513060.jpg?v=1779191863"},{"product_id":"garmin-pack-sondes-gt36-tm-gt15m-ih-transducteurs","title":"Garmin GT36-TM and GT15M-IH transducer pack","description":"\u003cp\u003e\n    The Garmin GT36-TM and GT15M-IH transducer pack (reference 010-02536-10) is a hybrid solution designed for navigators and anglers seeking a versatile sonar coverage. This bundle combines high-definition imaging capabilities with reliable depth detection, specifically targeting fiberglass-hulled boats.\n\u003c\/p\u003e\n\n\u003ch3\u003eGarmin GT36-TM transducer: high-definition imaging for structure detection\u003c\/h3\u003e\n\u003cp\u003e\n    The GT36-TM transducer, intended for transom mounting, integrates Ultra High-Definition ClearVü and SideVü scanning sonar technologies. It operates on frequencies of 455 kHz (425-485 kHz), 800 kHz (790-850 kHz), and 1000 kHz (940-1100 kHz), delivering 500 W of power. This configuration provides clear images of fish and underwater structures. Its maximum range reaches 122 meters (400 feet) in ClearVü and 152 meters (500 feet) in SideVü. The GT36-TM stands out with a 20% increased SideVü range at 1000 kHz compared to Garmin’s lower-range models. It also transmits depth and temperature data, and its mounting is compatible with transom angles from 0 to 70 degrees.\n\u003c\/p\u003e\n\n\u003ch3\u003eGarmin GT15M-IH transducer: depth and high-speed performance\u003c\/h3\u003e\n\u003cp\u003e\n    Complementary, the GT15M-IH transducer is designed for internal hull installation, specifically for solid fiberglass hulls up to 16 mm thick. It uses a traditional mid-band CHIRP sonar (85-165 kHz) with 600 W RMS power. This transducer can reach a maximum depth of 579 meters (1900 feet) in freshwater, providing accurate readings even at high speeds. Its internal installation eliminates drag and protects the transducer from external damage. The GT15M-IH comes with four plastic tanks to adapt to deadrise angles from 0 to 25 degrees, ensuring optimal sonar beam performance. Unlike the GT36-TM, it provides depth data only.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatility and positioning of the Garmin 010-02536-10 pack\u003c\/h3\u003e\n\u003cp\u003e\n    This pack positions itself as a complete solution for users of compatible Garmin chartplotters. While the GT36-TM transducer excels in coastal environments for detailed structure and fish school identification, the GT15M-IH ensures reliability in deeper waters and during high-speed navigation without the constraints of a through-hull mount. This combination allows users to benefit from the advantages of both technologies without significant compromise, offering superior flexibility compared to a single-transducer solution for coastal and offshore fishing.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860335378772,"sku":"010-02536-10","price":463.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c6f48d32-fe89-4574-a51e-d51932e1431c.jpg?v=1779191889"},{"product_id":"garmin-sonde-gt15m-ih-chirp-coque-600w","title":"GT15M-IH CHIRP transducer - in-hull mid-frequency","description":"\u003cp\u003e\n    Designed for solid fiberglass hulls, the Garmin GT15M-IH is an in-hull transducer providing CHIRP mid-band capabilities. This 600 W transducer operates in the 85 to 165 kHz frequency range, delivering depth readings up to 579 meters (1900 feet) under optimal conditions. The in-hull installation eliminates the need to drill through the hull bottom, reducing drag and protecting the transducer from external damage.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The GT15M-IH is specifically suited for fiberglass hulls up to 16 mm thick and deadrise angles from 0 to 25 degrees, using the four supplied plastic tanks. It excels at maintaining accurate depth readings at high speeds, a feature not always found in transom-mounted transducers that can be affected by turbulence. Unlike through-hull transducers that require a more invasive and often professional installation, the GT15M-IH offers a non-penetrating alternative. It provides only traditional CHIRP depth data and can be supplemented with additional Garmin transducers (such as GT36UHD-TM or GT56UHD-TM) via an optional Y-cable to add ClearVü and SideVü functionality.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and integration\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the Garmin GT15M-IH involves bonding the tank inside the hull, filling it with antifreeze fluid or mineral oil, then inserting the transducer. This approach minimizes signal interference typically caused by turbulence from propellers or other hull features. The transducer is compatible with many Garmin ECHOMAP and GPSMAP chartplotters, though an adapter cable may be required for some models. Its 8-pin design ensures standardized connection to compatible Garmin systems.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"","offer_id":55860630651220,"sku":"010-12402-00","price":152.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_084f7ba7-bae0-440e-8878-6306e339c6d1.jpg?v=1779195300"},{"product_id":"raymarine-sonde-sondeur-p79s-smartducer-nmea2000","title":"P79S SmartDucer adhesive depth sounder transducer (DeviceNet NMEA 2000 connector)","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine P79S SmartDucer\u003c\/strong\u003e adhesive depth sounder transducer (part number A80373) is designed for installation without hull penetration. This depth and temperature sensor, of the \"adhesive\" type, is an alternative to through-hull or transom-mount transducers, offering discreet integration and enhanced protection of the transducer inside the boat.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and NMEA 2000 connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    As a \"SmartDucer\", the P79S integrates processing electronics directly into the transducer, enabling simplified connection to the NMEA 2000 network via its DeviceNet connector. This feature distinguishes the P79S from passive transducers, which require an external sounder module to interpret data. It directly transmits depth and temperature data to the network, making it available to all multifunction displays (MFDs) and NMEA 2000-compatible instruments on board, including Raymarine, B\u0026G, or Garmin displays.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning and applications\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eP79S SmartDucer\u003c\/strong\u003e is positioned as a practical solution for sailboat or fiberglass powerboat owners who wish to avoid hull penetration. Unlike through-hull transducers such as the B164 or B744V models, the P79S poses no risk of leaks and is less susceptible to damage from underwater impacts. It offers adjustable keel-angle compensation, optimizing beam performance for accurate depth readings.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55863207952724,"sku":"A80373","price":316.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_e8846bdc-3916-4725-bed8-e7cda10fe4ef.jpg?v=1779218713"},{"product_id":"raymarine-sonde-coller-p79-transducteur-profondeur","title":"P79 adhesive depth sounder","description":"\u003cp\u003e\n    Designed for recreational sailors and racing crews seeking a depth measurement solution without compromising hull integrity, the RAYMARINE P79 adhesive depth sounder is a 200 kHz transducer. This in-hull transducer, with 600W RMS power, provides accurate depth data for compatible RAYMARINE navigation instruments.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Installation and Reliable Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The P79 transducer stands out with its internal installation, eliminating the need to drill the hull. It features an adjustable base that accommodates hull angles from 0 to 22 degrees, ensuring optimal vertical alignment of the acoustic beam. This installation method reduces water ingress risks and eliminates the hydrodynamic drag associated with through-hull or transom-mount transducers. While it does not offer the same fish detection performance as dedicated CHIRP transducers (such as RAYMARINE CPT-S or RV-xxx models), the P79 is a reliable option for displaying depth on instruments like i50 Depth or Axiom multifunction displays.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Compared to other RAYMARINE transducers, the P79 is specifically aimed at owners of solid-hull boats (non-sandwich) who prioritize installation simplicity and the absence of antifouling maintenance. It represents an alternative to classic through-hull transducers (such as the B744V) or transom-mount transducers (such as the P319), offering a discreet solution protected from impacts. Its 200 kHz frequency is suitable for medium depths and ensures broad compatibility with most RAYMARINE depth displays and chartplotters equipped with a 200 kHz transducer input.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55900453044564,"sku":"E26001-PZ","price":195.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_f1e6e489-830d-4084-9090-5e2635bd1385.jpg?v=1779377915"},{"product_id":"raymarine-sonde-sondeur-coller-p79s-smartducer-devicenet-stng","title":"P79S SmartDucer glue-on depth sounder transducer (DeviceNet connector + STng adapter)","description":"\u003cp\u003e\n    The \u003cstrong\u003eP79S SmartDucer\u003c\/strong\u003e glue-on depth sounder transducer from RAYMARINE, part number T70278, is a versatile solution for acquiring depth and temperature data without hull drilling. Designed for internal installation, it transmits data directly over the NMEA 2000 network, eliminating the need for a dedicated external sounder module. This approach simplifies system architecture and reduces integration costs for vessels equipped with MFDs or NMEA 2000-compatible instruments.\n\u003c\/p\u003e\n\u003ch3\u003eSmartDucer technology and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The SmartDucer concept integrates signal processing electronics directly into the transducer. The \u003cstrong\u003eP79S\u003c\/strong\u003e uses standard frequencies of 50 kHz and 200 kHz, providing coverage suitable for various depths and conditions. Connection is via a DeviceNet connector, compliant with NMEA 2000 specifications. RAYMARINE includes a SeaTalkNG adapter, ensuring plug-and-play integration with RAYMARINE navigation systems, similar to iTC-5 sensors or STNG modules.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning and applications\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike traditional through-hull transducers such as the B744V or B164, which require drilling, the P79S is mounted inside the fiberglass hull using epoxy resin. This makes it ideal for owners seeking to avoid hull alterations or for racing sailboats where hydrodynamic drag must be minimized. While it may offer slight signal attenuation compared to a through-hull transducer, its performance remains suitable for coastal and offshore navigation up to significant depths. It serves as a practical alternative to external transducers for mid-sized boats, where installation simplicity is a key criterion.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55902325145940,"sku":"T70278","price":316.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_ba8f11af-3788-4551-81e1-74b4b8cbd859.jpg?v=1779384360"},{"product_id":"raymarine-emetteur-coque-t905-sondeur","title":"Depth sounder: through-hull or adhesive 50mm","description":"\u003cp\u003e\n    Designed for marine navigation systems, the \u003cstrong\u003eRaymarine T905\u003c\/strong\u003e hull transmitter manages the transmission of data from your depth, speed, and temperature sensors. This module is essential for centralizing information from wired transducers to onboard instrumentation, providing an integration solution for various sensor configurations.\n\u003c\/p\u003e\n\u003ch3\u003eT905 installation and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the T905 transmitter requires vertical mounting at least 50 cm above the waterline, in a well-ventilated space and without direct contact with water. It must not be installed in a watertight compartment. It is powered via a 12\/24Vdc source and can also be powered by a Raymarine solar panel. Connecting the transducer cables follows a precise color-coding scheme, with specific instructions for Triducers (ground must be connected to the depth connector) and for speed sensors without a temperature sensor (connection between brown and white terminals).\n\u003c\/p\u003e\n\u003ch3\u003eIntegrating sensor data\u003c\/h3\u003e\n\u003cp\u003e\n    The T905 consolidates signals from separate sensors (depth, speed, temperature) into a single point. It requires the application of silicone grease on the contacts to ensure reliable connections. The housing cover secures and protects the outer cable sheaths. This type of transmitter is often used in systems where the flexibility to integrate existing sensors is prioritized over the use of \"all-in-one\" transducers or direct NMEA 2000 systems, as seen in newer products such as Raymarine's Axiom series or other brands like Garmin or B\u0026G.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55921774494036,"sku":"T905","price":111.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/raymarine-t905-50mm-thru-hull-depth-transducer-sku-exact.jpg?v=1784676268"},{"product_id":"garmin-gt8hw-ih-sondeur-in-hull-chirp","title":"GT8HW-IH","description":"\u003cp\u003e\n    Designed for fiberglass hulls of bass boat-style boats, the Garmin GT8HW-IH transducer is an in-hull solution that provides reliable depth readings even at high speeds. This model uses traditional CHIRP technology with a wide beam (High Wide) for clear underwater coverage and optimized target separation.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The GT8HW-IH operates over a frequency range of 145 to 230 kHz with 250 W RMS power, enabling detection up to 244 meters (800 feet) in freshwater. Its 24° to 16° beam provides effective bottom coverage. Unlike transom-mount transducers, the in-hull installation of the GT8HW-IH eliminates cavitation issues and damage risks, which is particularly advantageous for high-speed vessels or those frequently trailered.\n\u003c\/p\u003e\n\u003ch3\u003eCompatibility and scalability\u003c\/h3\u003e\n\u003cp\u003e\n    Compatible with many Garmin chartplotters from the ECHOMAP and GPSMAP series, this 8-pin transducer integrates easily with existing systems. For added versatility, it can be paired with a GT30-TM transducer (transom-mount) via an optional Garmin Y-cable (010-12445-33). This setup allows combining the GT8HW-IH’s high-speed depth readings with ClearVü\/SideVü scanning capabilities at trolling speeds. The transducer comes with a self-adhesive foam mounting ring for easy installation.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56009372467540,"sku":"010-12401-10","price":128.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_16524718-fdb8-4e73-b979-ba70f7156fbc.jpg?v=1780437576"},{"product_id":"airmar-p79d-sonde-interieure-inclinable-profondeur","title":"P79D — 600W Depth Sounder with Tiltable Adhesive Mount, Plastic, 50\/200kHz","description":"\u003cp\u003e\n    Designed for simplified installation, the \u003cstrong\u003eAIRMAR P79D\u003c\/strong\u003e is a 600 W interior transducer operating on dual frequencies of 50\/200 kHz. This model is intended for depth readings only, providing a no-drill solution for solid fiberglass hulls and aluminum hulls with a thickness of less than 3.8 mm.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Versatility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eP79D transducer\u003c\/strong\u003e features an adjustable-angle design that allows vertical orientation of the transducer even on hulls with deadrise angles from 0° to 22°. This ensures optimal echo return and stable depth performance. Installation is performed by bonding the plastic mounting base inside the hull, then filling with non-toxic antifreeze (propylene glycol) to facilitate sound transmission.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    With a peak power of 600 W, the \u003cstrong\u003eAIRMAR P79D\u003c\/strong\u003e offers a maximum range of 305 meters (1000 feet) at 50 kHz and 183 meters (600 feet) at 200 kHz. Beam widths are 45° for the 50 kHz frequency and 12° for 200 kHz, ensuring precise detection. Its diameter is 98 mm and its weight is 2.3 kg. It is compatible with vessels up to 8 meters in overall length and maintains high-speed performance when properly installed at the stern. The standard connection cable is 10 meters long and typically features a 10-pin Furuno connector.\n\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":56076313919828,"sku":"AI-31-449-1-02","price":232.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/d9bc2a2acb00dd6_lg_8a38eb2c-d332-4d8f-80a2-798970f16337.png?v=1781522501"},{"product_id":"furuno-sonde-200b-5s-1kw-200khz-caoutchouc","title":"200B-5S — Depth Sounder 200B-5S (1kW) - 200kHz - Rubber - 10m Cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO 200B-5S depth sounder\u003c\/strong\u003e is designed for detailed fish detection applications, offering 1 kW of power and a 200 kHz frequency. Its rubber construction provides protection against impacts and vibrations, while its round shape and 90 mm dimensions allow integration on various hull types. With a narrow 8.5° beam, this sounder is optimized for precise observation of fish schools.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Precision\u003c\/h3\u003e\n\u003cp\u003e\n    Operating at 200 kHz, the \u003cstrong\u003eFURUNO 200B-5S depth sounder\u003c\/strong\u003e delivers clear and detailed sonar returns, essential for identifying underwater targets. Its 8.5° beam allows for sharp echo separation, improving the ability to distinguish individual fish or seabed structures. Weighing 2.5 kg, it features a 10-meter bare-wire cable for flexible installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Materials\u003c\/h3\u003e\n\u003cp\u003e\n    This sounder is a non-through-hull model, simplifying installation compared to through-hull versions. It is made of rubber, a material chosen for its resilience and ability to withstand marine environment stresses. The \u003cstrong\u003e200B-5S\u003c\/strong\u003e can be mounted in a trunk, housing, or tank, offering multiple integration options aboard. Its robust construction and dedicated frequency make it suitable for applications requiring specific 200 kHz observation.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56076334072148,"sku":"00003834800","price":330.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/featured-upscaled-15500572852564-1000.jpg?v=1783620355"}],"url":"https:\/\/skysat.fr\/en-us\/collections\/transom-mount-transducers-1.oembed","provider":"Skysat","version":"1.0","type":"link"}