{"title":"Wiring accessories","description":"\u003ch2\u003eAccessories: connectivity and reliability of your onboard network\u003c\/h2\u003e\n\n\n\u003cp\u003e Modern marine electronics rely on a complex network of cables and connectors. The reliability of this network is crucial for the safety and performance of your navigation. At Skysat, drawing on our experience in offshore racing, we know that every connection matters. Discover here a carefully curated selection of accessories to optimize and secure your installation.\u003c\/p\u003e\n\n\n\u003ch2\u003e power supply and electrical protection\u003c\/h2\u003e\n\n\n\u003cp\u003e A stable and properly protected power supply is the foundation of any marine electronic system. Choosing the right accessories ensures the longevity and reliability of your equipment. Poor connections or inadequate protection can lead to costly and dangerous failures.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eFuses and fuse holders:\u003c\/strong\u003e Essential protection against overcurrents, to be sized precisely according to equipment specifications.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eConnection strips:\u003c\/strong\u003e Enable a clean and organized distribution of power, facilitating maintenance and troubleshooting.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCircuit breakers:\u003c\/strong\u003e For quickly isolating sections of the electrical network in case of emergency or maintenance.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eDC-DC Converters:\u003c\/strong\u003e Adapt the supply voltage for equipment requiring a specific voltage (e.g., 12V to 24V).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e network connectivity and cabling\u003c\/h2\u003e\n\n\n\u003cp\u003e Communication between the various electronic devices is ensured by appropriate cables and connectors. The choice of these components is crucial for the quality and stability of the NMEA 2000 or SeaTalk NG network. Careful cabling minimizes interference and ensures optimal data transfer.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eNMEA 2000 cables:\u003c\/strong\u003e Backbone, drop cables, and T-connectors for creating a reliable NMEA 2000 network. Check compatibility with different manufacturers.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eSeaTalk NG cables:\u003c\/strong\u003e Cables and connectors specifically designed for Raymarine equipment. Check compatibility with older SeaTalk generations.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eWaterproof connectors:\u003c\/strong\u003e Ensure a reliable connection even in humid and saline marine environments. IP67 or higher rated connectors are recommended.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eNMEA 2000 terminations:\u003c\/strong\u003e Termination resistors to be placed at the ends of the NMEA 2000 backbone to avoid signal reflections.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e cable fixing and organization\u003c\/h2\u003e\n\n\n\u003cp\u003e A clean and well-organized installation facilitates maintenance and reduces the risk of cable damage. Fixing and organizing accessories are essential for maintaining a reliable and long-lasting electronic network. Messy cabling leads to problems in the long run.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eCable ties:\u003c\/strong\u003e For securing cables along walls or cable trays. Choose UV-resistant ties for outdoor use.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHeat shrink tubing:\u003c\/strong\u003e Insulates and protects electrical connections, while providing additional sealing.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCable trays:\u003c\/strong\u003e Organize and protect cables along bulkheads and decks.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eWatertight cable passages:\u003c\/strong\u003e Allow cables to pass through bulkheads while maintaining the watertightness of the hull.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cstrong\u003eSkysat's advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e When installing your network, take the time to clearly label each cable. Clear labeling greatly facilitates troubleshooting and future maintenance. Use water-resistant and UV-resistant labels for long-lasting identification.\u003c\/p\u003e","products":[{"product_id":"navico-cable-adaptateur-ethernet-rj45-radar-halo-dome","title":"RJ45 Ethernet Adapter Cable for Halo Dome Radar","description":"\u003cp\u003eThe Navico 000-14552-001 adapter cable is an essential connectivity solution for integrating Simrad, Lowrance, and B\u0026G Halo Dome series radars into a marine Ethernet network. This 1.5-meter cable is specifically designed to connect the proprietary waterproof connector of the radome cable to a standard RJ45 Ethernet port.\u003c\/p\u003e\n\n\u003ch3\u003eSimplified network integration\u003c\/h3\u003e\n\u003cp\u003eThis adapter is the key component for directly connecting your Halo radar to an Ethernet port on your multifunction display (MFD) or a network switch, such as the Navico NEP-2. Without this adapter, it is impossible to establish reliable data communication between the radar and the rest of your navigation system. It eliminates the need for complex modifications or uncertified solutions that could compromise waterproofing and signal integrity.\u003c\/p\u003e\n\n\u003ch3\u003eDesign and reliability\u003c\/h3\u003e\n\u003cp\u003eAs an original Navico part, this cable ensures pinout, shielding, and manufacturing quality compliant with the high-speed data transfer requirements of a radar. Unlike a consumer-grade Ethernet cable, it is designed to withstand the marine environment, providing a stable and high-performance connection for clear, low-latency radar imagery. Its use is mandatory to maintain the warranty of your Halo radar equipment.\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723738538324,"sku":"000-14552-001","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5bd8edfe-5843-488c-a7b0-8bba7801fb13.jpg?v=1772639391"},{"product_id":"navico-interface-capteur-niveau-fluide-nmea-2000","title":"Fluid level sensor with NMEA 2000 interface","description":"\u003cp\u003eThe Navico 000-11518-001 fluid level interface is a compact and essential gateway for modernizing your vessel's instrumentation. It converts the analog signal from a standard resistive tank level sensor into digital data usable on a NMEA 2000 network. This conversion allows you to eliminate traditional analog gauges and centralize all fluid level information directly on your multifunction displays (MFDs).\u003c\/p\u003e\n\n\u003ch3\u003eUniversal NMEA 2000 Network Integration\u003c\/h3\u003e\n\u003cp\u003eDesigned for maximum compatibility, this interface integrates seamlessly into any existing NMEA 2000 network. It is particularly optimized for Navico ecosystems (Simrad, Lowrance, B\u0026G), but works with any NMEA 2000 certified multifunction display, including those from Garmin or Raymarine. Once connected, it allows you to configure the fluid type (fuel, fresh water, waste water, oil), tank capacity, and instance number directly from your MFD, offering total flexibility for monitoring multiple tanks.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Installation\u003c\/h3\u003e\n\u003cp\u003eThis module is compatible with most resistive level sensors on the market, whether they are American type (240-33 Ohms) or European type (0-190 Ohms). Installation is simple: the interface connects to the NMEA 2000 backbone via a standard T-connector (not supplied) and connects to the two wires of your existing tank sensor. This approach significantly simplifies wiring by avoiding the need to run new lines to the console.\u003c\/p\u003e\n\n\u003ch3\u003eA Cost-Effective and Reliable Solution\u003c\/h3\u003e\n\u003cp\u003eCompared to more complex and expensive tank monitoring systems, the Navico interface represents an extremely cost-effective and reliable solution for digitizing level data. It offers a simple and direct way to integrate existing analog sensors into a modern navigation system, without requiring the complete replacement of tank probes.\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723743977812,"sku":"000-11518-001","price":85.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5369ddcf-94ab-4685-865b-cb2f896549ca.png?v=1772639256"},{"product_id":"bg-connecteur-4-voies-faible-perte-micro-c-nmea-2000","title":"4-way low-loss Micro-C NMEA 2000 connector","description":"\u003cp\u003eThe \u003cstrong\u003eB\u0026amp;G\u003c\/strong\u003e 4-way low-loss Micro-C NMEA 2000 connector is an essential wiring component for creating or extending an onboard network. Designed to centralize drops, it allows up to four devices (multifunction displays, sensors, GPS antennas) to be connected directly to the NMEA 2000 backbone. Unlike the daisy-chaining of multiple individual T-connectors which generates resistance, this multi-port block drastically minimizes voltage drops and ensures maximum data signal integrity.\u003c\/p\u003e\n\u003ch3\u003eReliability and network integration\u003c\/h3\u003e\n\u003cp\u003eFeaturing a molded, waterproof design perfectly suited for demanding marine environments, this standard Micro-C connector streamlines and cleans up your installation. By reducing the number of junction points on the backbone, it significantly lowers the risk of accidental disconnection or water ingress. It integrates natively with equipment from B\u0026amp;G, Simrad, Lowrance (Navico group), as well as any other NMEA 2000 certified device. Its light weight of 0.05 kg and compact size greatly facilitate mounting behind helm consoles or in tight technical compartments.\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723744502100,"sku":"000-12612-001","price":59.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d6e896c8-d346-42a2-a286-cac2b0c33985.png?v=1772639289"},{"product_id":"bg-connecteur-en-t-nmea-2000-micro-c","title":"NMEA 2000 T-connector","description":"\u003cp\u003eThe \u003cstrong\u003eB\u0026amp;G\u003c\/strong\u003e NMEA 2000 T-Connector from the Navico group is the essential component for extending or designing your navigation network. Designed to integrate perfectly with an existing NMEA 2000 backbone, it allows the connection of new electronic equipment such as a sensor, a display, or a GPS antenna. This standardized connector ensures reliable data transmission between your various marine devices.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and network integration\u003c\/h3\u003e\n\u003cp\u003eThanks to its Micro-C standard design, this T-connector is universally compatible with all NMEA 2000 networks. Although distributed by Navico (B\u0026amp;G, Simrad, Lowrance), it integrates seamlessly with equipment from other certified brands such as Garmin or Raymarine. Unlike older proprietary networks, this standardization ensures a scalable and robust network architecture, greatly facilitating installation without the need for specific tools.\u003c\/p\u003e\n\u003ch3\u003eReliability in marine environments\u003c\/h3\u003e\n\u003cp\u003eThis component is built to withstand the most demanding marine conditions. Its contacts ensure optimal conductivity to prevent any signal loss or voltage drop on the NMEA 2000 network. The waterproof connections, once locked, protect the system against moisture and corrosion, thus ensuring the longevity of your onboard electronic installation.\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723744665940,"sku":"000-0119-79","price":17.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_cfeaaf60-26a9-4283-905f-16cfc5f62828.png?v=1772639296"},{"product_id":"navico-convertisseur-can-vers-usb-st10-simnet","title":"Navico CAN to USB converter (ST10 simnet)","description":"\u003cp\u003eThe \u003cstrong\u003eNavico CAN to USB Converter (ST10 Simnet)\u003c\/strong\u003e is an essential interface tool designed to connect a Simnet marine network directly to a personal computer via a USB port. This adapter is specifically developed for Navico ecosystems, including Simrad, Lowrance, and B\u0026amp;G brands, which use the Simnet protocol, a variant of the NMEA 2000 network with proprietary connectors.\u003c\/p\u003e\n\n\u003ch3\u003eDiagnostic and Maintenance Interface\u003c\/h3\u003e\n\u003cp\u003eThe primary utility of this converter is to allow technicians and advanced users to interact directly with devices connected to the Simnet network from a PC. It is essential for performing system diagnostics, software (firmware) updates on older equipment, or carrying out advanced configurations that are not always accessible from a multifunction display. Unlike standard NMEA 2000 to USB gateways like those from Actisense, designed for real-time data streaming to navigation software, the ST10 is primarily a service and maintenance tool.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Usage\u003c\/h3\u003e\n\u003cp\u003eThis converter is key to maintaining and troubleshooting installations based on Simnet technology. It ensures communication between the network's CAN bus and Navico's diagnostic applications on a computer. Its use is targeted: it is not a general-purpose converter, but a specialized piece of equipment to ensure the longevity and performance of Navico navigation and communication systems. It is therefore a crucial investment for marine electronics professionals and boat owners wishing to maintain their installation autonomously.\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723744895316,"sku":"000-00020-001","price":322.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_be533133-445a-422c-95a5-744ca06e5e4d.jpg?v=1772639304"},{"product_id":"navico-kit-dorsale-demarrage-nmea-2000-micro-c","title":"NMEA 2000 micro-C starter backbone kit","description":"\u003cp\u003e\n    The \u003cstrong\u003eNavico NMEA 2000 micro-C backbone starter kit\u003c\/strong\u003e, part number 000-10760-001, is the essential foundation for establishing a NMEA 2000 communication network aboard your vessel. Designed to simplify the integration of electronic equipment, this kit enables reliable and standardized connection of sensors, multifunction displays, and other NMEA 2000-compatible devices, whether from B\u0026G, Lowrance, Simrad, or other manufacturers.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and performance of the NMEA 2000 network\u003c\/h3\u003e\n\u003cp\u003e\n    This kit provides a complete solution for initiating a NMEA 2000 micro-C network. It typically includes a 4.5-meter backbone cable, a power cable, two terminations, and T-connectors, allowing for a robust and scalable network architecture. The NMEA 2000 standard ensures fast and secure data transmission, essential for navigation, engine, fishfinder, and autopilot information. Unlike point-to-point installations, a NMEA 2000 network centralizes data, reducing wiring and simplifying diagnostics.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and scalability\u003c\/h3\u003e\n\u003cp\u003e\n    As a starter kit, the \u003cstrong\u003eNavico NMEA 2000 micro-C backbone starter kit\u003c\/strong\u003e serves as an economical and effective first step for any user looking to modernize or expand their electronic system. It complements the ranges of multifunction displays and instruments from brands such as B\u0026G (e.g., Zeus or Triton series), Simrad (NSO, NSS Evo), or Lowrance (HDS, Elite Ti). Its universal compatibility with the NMEA 2000 protocol ensures interoperability with most marine equipment on the market, offering maximum flexibility for future expansions of your installation. Its robust design ensures reliability in a marine environment.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723745321300,"sku":"000-10760-001","price":75.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_50e09da1-3e02-4b16-bff1-0e24c2b92dca.jpg?v=1772639519"},{"product_id":"navico-kit-terminators-tr-120-mf-nmea-2000","title":"TR-120 M+F NMEA 2000 termination kit","description":"\u003cp\u003e\n    The Navico TR-120 M+F NMEA 2000 terminator kit is an essential component for the integrity and stability of any NMEA 2000 network. Designed for marine navigation and communication systems, this kit ensures proper termination of the data bus, preventing signal reflections that can lead to communication errors or network failures.\n\u003c\/p\u003e\n\u003ch3\u003eFunctionality and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Each NMEA 2000 network requires two 120-ohm terminators, one at each end of the main bus. The TR-120 kit provides both a male and a female terminator, offering flexibility to adapt to existing or new network configurations. These components are compatible with all NMEA 2000 certified devices and networks, whether from Navico brands (B\u0026amp;G, Lowrance, Simrad) or other manufacturers like Garmin or Raymarine, ensuring seamless interoperability.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the TR-120 kit is quick and easy, connecting directly to T-connectors or extension cables at the network ends. Their robust design ensures a reliable connection and resistance to demanding marine environments, as expected from NMEA 2000 wiring accessories. Using these terminators is imperative to maintain optimal performance of your navigation system and avoid malfunctions related to incorrect termination.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723745517908,"sku":"000-0127-52","price":18.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_7001539c-5e0c-4eb9-8aee-8ad631bcada6.png?v=1772639535"},{"product_id":"navico-nep-2-port-dextension-reseau","title":"NEP-2 Network Expansion Port","description":"\u003cp\u003eLe \u003cstrong\u003eport d'extension réseau NEP-2\u003c\/strong\u003e (référence 000-10029-001) de \u003cstrong\u003eNavico\u003c\/strong\u003e est un commutateur Ethernet marin conçu pour centraliser et distribuer les données à très haut débit. Compatible avec les écrans multifonctions et modules des marques Simrad, Lowrance et B\u0026amp;G, ce hub permet de relier simultanément plusieurs équipements exigeants en bande passante, tels que les radars, les modules sondeurs ou les systèmes de cartographie partagée, là où un réseau NMEA 2000 classique serait techniquement insuffisant.\u003c\/p\u003e\n\n\u003ch3\u003ePerformances et connectivité Gigabit\u003c\/h3\u003e\n\u003cp\u003eS'appuyant sur les spécifications des architectures réseaux récentes de la gamme, ce commutateur est équipé de 5 ports Ethernet utilisant des connecteurs M12 GbE à codage X, capables de supporter des vitesses de transfert Gigabit. Il reste parfaitement rétrocompatible avec les appareils d'ancienne génération dotés de connecteurs Ethernet jaunes à 5 broches typiques du NEP-2, via l'utilisation d'adaptateurs spécifiques. Son alimentation polyvalente tolère une large plage de 10,4 à 31,2 V CC (compatible 12 V et 24 V), avec une consommation électrique maximale extrêmement faible plafonnant à 2,5 W (0,18 A sous 13,8 V CC).\u003c\/p\u003e\n\n\u003ch3\u003eConception marine et installation\u003c\/h3\u003e\n\u003cp\u003ePesant seulement 0,48 kg, son boîtier compact répond aux normes d'étanchéité IPX6 et IPX7, garantissant une résistance optimale dans les environnements marins difficiles, avec une plage de température de fonctionnement allant de -15 °C à 55 °C. Des indicateurs LED sont intégrés pour diagnostiquer rapidement l'état de l'alimentation (vert en fonctionnement, orange en veille ou rouge en cas de surtension) ainsi que l'activité de chaque port réseau. L'appareil respecte également une distance de sécurité au compas de 0,5 mètre pour éviter toute interférence magnétique.\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723745878356,"sku":"000-10029-001","price":324.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_a5848c4c-33f6-4bee-924f-43dce7729e5c.png?v=1772639573"},{"product_id":"b-g-h5000-pack-connecteurs-unite-centrale","title":"H5000 Central Processing Unit Connector Pack","description":"\u003cp\u003e\n    The B\u0026amp;G H5000 Central Unit Connector Pack (part number 000-12894-001) is an essential accessory kit designed for the installation and complete integration of the standard H5000 processor. This pack ensures connectivity between the H5000 central unit and the various onboard sensors, displays, and networks, guaranteeing reliable and secure data transmission in the marine environment. Manufactured in Mexico, this kit weighs 0.05 kg and is specifically adapted to the technical requirements of the H5000 system.\n\u003c\/p\u003e\n\n\u003ch3\u003eH5000 System Integration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This connector kit is optimized to interface with the H5000 processor ports, facilitating the establishment of critical links. It includes the necessary plugs and terminals for connection to the NMEA 2000 network, the Ethernet network for data transfer and access to the web configuration server, and the mini-USB port for maintenance operations and software updates. The pack also manages power supply (12 V DC nominal, 9-16 V), analog inputs for external sensors (such as speed, depth, temperature, or motion sensors), and digital outputs for alarm triggering. The robustness of the components complies with IPX4 environmental protection, ensuring resistance to water splashes.\n\u003c\/p\u003e\n\u003cp\u003e\n    It is crucial to note that this pack (000-12894-001) is exclusively compatible with the standard H5000 central unit. It is distinct from the connector kit intended for the H5000 autopilot processor, which bears the part number 000-12895-001. This distinction highlights the modularity and specificity of B\u0026amp;G accessories within the H5000 range, ensuring precise integration for each central component of the navigation system.\n\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723762229588,"sku":"000-12894-001","price":54.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_17a21dca-10a1-42b5-ad2e-287e7f4b7095.webp?v=1770937342"},{"product_id":"b-g-interface-filaire-ws310-nmea-2000","title":"WS310 Wired Interface","description":"\u003cp\u003e \nThe B\u0026amp;G \u003cstrong\u003eWS310 wired interface\u003c\/strong\u003e is the essential connection component for integrating the WS310 wind sensor\/vane into an NMEA 2000® network. It ensures the conversion and transmission of raw sensor data to compatible displays and autopilots. Designed for easy installation and maximum reliability, this interface is the standard wired solution for the B\u0026amp;G wind sensor range.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e NMEA 2000 and 0183 network connectivity\u003c\/h3\u003e\n\n\u003cp\u003e\n The WS310 interface connects directly to the NMEA 2000 network via its Micro-C port, with a LEN (Load Equivalency Number) of 1. It also offers compatibility with older systems thanks to its ability to transmit data in NMEA 0183 format. The supported NMEA 0183 frames are MWV (wind speed and angle) and R.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Electrical and physical characteristics\u003c\/h3\u003e\n\n\u003cp\u003e \nThis compact unit operates on a 12V DC power supply, tolerating a voltage range of 9 to 16V DC. Its power consumption is 15mA at 12V DC. Its dimensions are 90 x 20 x 10 mm and it weighs 0.114 kg, allowing for discreet installation. The magnetic compass safety distance is 300 mm.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Robust design for the marine environment\u003c\/h3\u003e\n\n\u003cp\u003e\n Built to withstand marine conditions, the \u003cstrong\u003eWS310 wired interface\u003c\/strong\u003e is IPX7 waterproof certified. It operates in a temperature range of -15°C to +55°C and can be stored between -20°C and +60°C. Its compliance with IEC\/EN 60945 standards attests to its robustness and reliability for intensive marine use.\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723762655572,"sku":"000-14389-001","price":127.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/bg-interface-filaire-ws310_000-14389-001-1.jpg?v=1774277662"},{"product_id":"b-g-interface-ws310-convertisseur-nmea-0183-vers-nmea-2000","title":"WS310 interface converts NMEA 0183 to NMEA 2000","description":"\u003cp\u003e \nThe B\u0026amp;G WS310 interface is a protocol converter designed to integrate data from a wired WS310 wind sensor into an NMEA 2000 network. This module is essential for connecting the WS310 wind vane anemometer, which communicates in NMEA 0183, to modern B\u0026amp;G navigation systems, including multifunction displays and autopilots.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Connectivity and protocol conversion\u003c\/h3\u003e\n\n\u003cp\u003e\n The interface connects directly to the NMEA 2000 network via a Micro-C port, representing a load of 1 LEN (Load Equivalency Number). It is programmed to specifically interpret the NMEA 0183 MWV and R sentences emitted by the wind sensor, ensuring accurate and reliable conversion of wind speed and angle data to the NMEA 2000 protocol.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Physical and electrical characteristics\u003c\/h3\u003e\n\n\u003cp\u003e \nThe module requires a 12V DC power supply and operates within a voltage range of 9 to 16V DC. Designed for marine environments, the interface is IPX7 waterproof certified. Its operating temperature range is -15°C to +55°C, and its storage temperature range is -20°C to +60°C. Its compact dimensions of 90 x 20 x 10 mm and a weight of 0.2 kg facilitate installation. The device complies with IEC\/EN 60945 standards and requires a safety distance of 300 mm from the magnetic compass.\n\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723762884948,"sku":"000-15090-001","price":152.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_ac5959ca-951b-4c44-bfe7-2e46cf5f6525.jpg?v=1772631509"},{"product_id":"raymarine-cable-1m5-seatalk-ng-nmea-2000-spur-devicenet","title":"1.5m SeaTalk NG SPUR F cable \/ Devicenet NMEA 2000 M connector","description":"\u003cp\u003e\n    Designed for integrating Raymarine equipment into a standard NMEA 2000 network, the \u003cstrong\u003eRaymarine A06046 1.5m cable\u003c\/strong\u003e is an essential component for mixed-bus architectures. It connects a SeaTalkng \"spur\" type device (with a female SeaTalkng connector) to an NMEA 2000 network using male DeviceNet connectors. This cabling ensures the transmission of navigation data and sensor readings between the two protocols, enabling system interoperability.\n\u003c\/p\u003e\n\n\u003ch3\u003eSeaTalkng and NMEA 2000 Interconnection\u003c\/h3\u003e\n\u003cp\u003e\n    Raymarine’s SeaTalkng system is a proprietary implementation of the NMEA 2000 standard, optimized for the brand’s ecosystem. While brands like Garmin, Simrad, or B\u0026G predominantly use NMEA 2000 DeviceNet connectors for their networks and devices, Raymarine has developed its own cabling, particularly for spur cables. The \u003cstrong\u003eA06046 cable\u003c\/strong\u003e bridges this gap by providing a direct link between a SeaTalkng spur and a standard NMEA 2000 backbone. It differs from blue SeaTalkng backbone cables or SeaTalk(1) to SeaTalkng adapters.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This 1.5m cable features a female SeaTalkng connector on the \"spur\" side and a male DeviceNet connector on the NMEA 2000 side. It is specifically designed for applications where a Raymarine device with a SeaTalkng spur connection must be integrated into an existing NMEA 2000 network without complex backbone adapters. The white color of the cable identifies it as a spur cable according to the SeaTalkng color code, contrasting with blue backbone cables. It is compatible with all Raymarine products equipped with a SeaTalkng spur interface, as well as certified NMEA 2000 DeviceNet networks.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723792277844,"sku":"A06046","price":36.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_7210ba29-0906-441c-acf8-fea7e5a59283.jpg?v=1779215487"},{"product_id":"raymarine-cable-adaptateur-seatalkng-nmea-2000-1m","title":"Cable 1 meter SeaTalk NG F \/ DeviceNet (NMEA 2000) F)","description":"\u003cp\u003e\n    Designed for system integration, the \u003cstrong\u003eRaymarine A06075 1-meter SeaTalkng to DeviceNet (NMEA 2000) cable\u003c\/strong\u003e bridges Raymarine devices using the proprietary SeaTalkng bus and standard NMEA 2000 networks. This adapter cable enables essential interoperability for mixed marine electronic architectures, eliminating the need for complex gateways to directly connect devices.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Network Interoperability and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Raymarine’s SeaTalkng system, an interconnection bus based on a backbone and spur architecture, is designed for simplified connectivity. While specific products like the ST70 instruments can bridge to the legacy SeaTalk(1), this A06075 cable provides a direct path for NMEA 2000-compliant devices. It differs from backbone (blue) or spur (white) cables by acting as an adapter, allowing NMEA 2000 sensors or displays to be added to an existing SeaTalkng network. The documentation explicitly states that adapter cables are available to connect NMEA 2000 products.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Integration and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the A06075 cable follows Raymarine’s general guidelines for SeaTalkng networks, which emphasize proper terminations at backbone ends. Its design with small-diameter connectors and color coding (though this specific cable is an adapter, the SeaTalkng system uses blue for the backbone and white for spurs) minimizes connection errors. Compared to solutions requiring costlier protocol converters, this cable offers a plug-and-play solution for physically integrating NMEA 2000 devices, such as those from Garmin or B\u0026G, into a primary Raymarine SeaTalkng environment. It is critical to note that this cable ensures both physical connection and data compatibility where the two protocols share common PGNs (Parameter Group Numbers), optimizing system expansion without added expense.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723792507220,"sku":"A06075","price":45.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_272240cf-8b90-4381-9da3-f5c2eb4c3115.png?v=1779215718"},{"product_id":"raymarine-cable-adaptateur-stng-dorsale-devicenet-400mm-a80675","title":"STNG female back end to DeviceNet female adapter cable 400mm","description":"\u003cp\u003eThe Raymarine A80675 adapter cable is a critical connectivity solution for integrating heterogeneous marine networks. At 400 mm long, it is specifically designed to link a Raymarine SeaTalkNG (STNG) backbone to a standard NMEA 2000 backbone using DeviceNet connectors.\u003c\/p\u003e\n\n\u003ch3\u003eBackbone network interoperability\u003c\/h3\u003e\n\u003cp\u003eUnlike spur\/drop cables that connect individual devices to the network, this A80675 adapter unifies two main trunks of different technologies. It is essential when integrating Raymarine equipment into an existing NMEA 2000-based system (such as Garmin or Furuno), or vice versa, without replacing the entire wiring infrastructure. It ensures data continuity and integrity across the merged network.\u003c\/p\u003e\n\n\u003ch3\u003eDesign and features\u003c\/h3\u003e\n\u003cp\u003eThis cable features a female STNG connector for connection to the Raymarine backbone and a female DeviceNet connector for connection to the NMEA 2000 backbone. Its 0.4-meter length provides sufficient flexibility for clean routing in a console or technical compartment. Manufactured to Raymarine quality standards, it guarantees a robust and watertight connection, essential for long-term reliability in the marine environment.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723792900436,"sku":"A80675","price":34.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/cable-adaptateur-stng-dorsale-femelle-vers-devicenet-femelle-400mm_a80675-2.jpg?v=1776785636"},{"product_id":"raymarine-cable-adaptateur-a80489-sonde-cp370-vers-axiom-rv","title":"Adapter cable (8 to 25) for CP370 probe on Axiom RV","description":"\u003cp\u003eThe Raymarine A80489 adapter cable is the essential solution for boat owners looking to upgrade their navigation electronics. It allows you to connect an existing transducer, originally designed for a Raymarine CP370 sounder module, directly to an Axiom RV series multifunction display. This adapter ensures a seamless transition between hardware generations, protecting your initial investment in a quality transducer.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Connection\u003c\/h3\u003e\n\u003cp\u003eThis cable specifically converts the 8-pin connector of CP370-compatible transducers to the 25-pin connector required by the \"RealVision 3D + 1kW\" ports on Axiom RV MFDs. By using this adapter, you retain the capabilities of your traditional transducer while benefiting from the interface and advanced features of your new Axiom RV display. It is a plug-and-play solution that greatly simplifies installation and avoids the need to replace an existing transducer, an often complex and costly operation.\u003c\/p\u003e\n\n\u003ch3\u003ePositioning within the Raymarine Range\u003c\/h3\u003e\n\u003cp\u003eUnlike Y-splitters or extension cables, the A80489 has a very specific conversion function. It differs from other cables such as the A80488 (which adapts a CP370 transducer to an Axiom DV) by its 25-pin connector, dedicated exclusively to Axiom RV models. It is an essential component for ensuring backward compatibility within the Raymarine ecosystem, allowing for a progressive upgrade of your navigation and fishfinding system.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723793457492,"sku":"A80489","price":55.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_2d5d1052-4282-4b35-8597-fac252e38937.jpg?v=1773942428"},{"product_id":"raymarine-cable-adaptation-9-broches-25-broches-sonde-cptxx-axiom-rv-axiom-pro-rvx","title":"Adapter cable (9-pin to 25-pin) for probe (CPTxx) on AXIOM RV or Axiom Pro RVX","description":"\u003cp\u003e\n    The Raymarine A80490 adapter cable is designed to facilitate the integration of CPTxx series transducers (9-pin) with modern Axiom RV or Axiom Pro RVX multifunction displays (MFD) (25-pin). This solution allows users to preserve their investment in existing CPTxx transducers while benefiting from the advanced features of Axiom MFDs equipped with RealVision technology. Instead of replacing the entire transducer system, the A80490 provides a direct and reliable bridge.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and technical positioning\u003c\/h3\u003e\n\u003cp\u003e\n    This adapter cable positions the Axiom RV\/Pro RVX range as a flexible upgrade for CPTxx transducer owners. While Axiom RV and Pro RVX MFDs natively integrate RealVision 3D, DownVision, and SideVision technologies via their 25-pin connectors, the A80490 cable ensures compatibility with CPTxx transducers that provide traditional CHIRP capabilities. It differs from full transducer conversion solutions by offering a simple connector adaptation, which is relevant for users who do not require complete RealVision features or wish to spread their upgrade costs.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration into the Raymarine system\u003c\/h3\u003e\n\u003cp\u003e\n    The A80490 fits into the Raymarine ecosystem by enabling a smooth transition to Axiom series MFDs, particularly those running LightHouse 4. It ensures that depth and temperature data from CPTxx transducers are correctly transmitted and interpreted by Axiom RV or Axiom Pro RVX displays. It is a key component for installations where reusing existing equipment is a priority, offering an alternative to purchasing a new RealVision transducer when the CPTxx transducer still meets navigation and fishing needs. This cable does not modify the intrinsic capabilities of the CPTxx transducer but ensures its electrical and data connectivity with the specified MFDs.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723793621332,"sku":"A80490","price":58.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d5241459-763f-4426-a551-3e886f6c829c.jpg?v=1779219181"},{"product_id":"raymarine-cable-seatalk-ng-devicenet-nmea2000-femelle-400mm","title":"SeaTalk NG \/ Devicenet NMEA2000 female cable (400mm)","description":"\u003cp\u003e\n    The Raymarine A06045 cable is an essential interconnect solution for marine navigation systems, enabling communication between a SeaTalkng network and NMEA2000-compatible devices. With a length of 400 mm, this adapter cable is specifically designed for short-range connections, featuring a female DeviceNet NMEA2000 connector at one end and a standard SeaTalkng connector at the other.\n\u003c\/p\u003e\n\n\u003ch3\u003eNetwork integration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This adapter cable allows third-party NMEA2000 devices to connect to Raymarine’s proprietary SeaTalkng bus. Unlike standard SeaTalkng spur cables or backbone bus cables, which connect native Raymarine components, the A06045 is intended to extend the network to devices compliant with the NMEA2000 standard. It aligns with Raymarine’s strategy of providing extended connectivity, similar to the bridges integrated into certain ST70 instruments for older SeaTalk(1) systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical and installation specifics\u003c\/h3\u003e\n\u003cp\u003e\n    The SeaTalkng system is characterized by a bus architecture with a main backbone cable and spur cables for individual products. The A06045 cable functions as a spur adapter cable, connecting to a SeaTalkng T-piece or junction block. Its design with small-diameter connectors and color coding (blue for the backbone, white for spurs, red stripe for power) aims to simplify installation and minimize connection errors. Using this type of cable is critical in mixed configurations where NMEA2000 integration flexibility is required, complementing Raymarine’s range of standard SeaTalkng cables in various lengths.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723796078932,"sku":"A06045","price":40.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_fe0c055c-d07e-4de6-8f03-2ea8338d3636.png?v=1779215468"},{"product_id":"raymarine-connecteur-5-voies-seatalk-ng-a06064","title":"SeaTalk NG 5-way connector","description":"\u003cp\u003eThe Raymarine A06064 5-way connector is a fundamental component for building and extending any SeaTalk NG navigation network. Designed to simplify wiring and improve reliability, this junction block serves as a centralized connection point, replacing the daisy-chaining of multiple individual T-connectors found in standard NMEA 2000 networks.\u003c\/p\u003e\u003ch3\u003eSimplified network architecture\u003c\/h3\u003e\u003cp\u003eThis connector enables the creation of a clean, organized backbone. It features five ports: two blue ports for connecting the main backbone cable and three white ports for linking devices and sensors (drop connections or \"spurs\"). This configuration allows up to three instruments—such as a display, wind sensor, or GPS antenna—to be connected at a single network point. Using this multiport block reduces the number of connections, minimizing potential failure points and simplifying troubleshooting.\u003c\/p\u003e\u003ch3\u003eCompatibility and positioning\u003c\/h3\u003e\u003cp\u003eRaymarine’s SeaTalk NG system is a proprietary implementation of the NMEA 2000 protocol. While the data is NMEA 2000-compatible, the connectors are Raymarine-specific, making components like the A06064 essential for any brand installation. Unlike Garmin or Navico’s standard T-connectors, which are assembled individually, the Raymarine 5-way block offers a more integrated and compact solution, particularly advantageous in confined spaces behind a console or dashboard.","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723799224660,"sku":"A06064","price":38.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_b2f21a8c-ec34-4e5f-8c32-3b79ee9066b2.png?v=1779215578"},{"product_id":"raymarine-connecteur-t-seatalk-ng-a06028","title":"SeaTalk NG T-connector","description":"\u003cp\u003eThe Raymarine SeaTalk NG T-connector, part number A06028, is a fundamental component for creating and extending any Raymarine marine navigation network. It serves as the main junction point for integrating an additional device, such as a multifunction display or a sensor, into your system’s backbone (backbone).\u003c\/p\u003e\n\n\u003ch3\u003eDesigned specifically for the SeaTalk NG ecosystem\u003c\/h3\u003e\n\u003cp\u003eThis connector differs from standard NMEA 2000 Micro-C connectors used by brands like Garmin or B\u0026G with its specific color-coding system and locking mechanism. The two blue ports are dedicated to connecting the backbone, ensuring network continuity, while the white port is reserved for branching off (spur) a cable to a device. This intuitive design eliminates wiring errors during installation.\u003c\/p\u003e\n\n\u003ch3\u003eReliability and robustness in marine environments\u003c\/h3\u003e\n\u003cp\u003eThe bayonet locking system provides a robust mechanical connection and perfect sealing, protecting contacts from corrosion and vibrations. Weighing only 0.1 kg, the A06028 T-connector integrates discreetly and securely on your vessel. For hybrid installations, it can be used with adapters to ensure compatibility with third-party NMEA 2000 equipment while maintaining the integrity and reliability of the SeaTalk NG architecture.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723799388500,"sku":"A06028","price":23.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_9ff886de-bc31-408b-9261-17eece7caa29.jpg?v=1779215185"},{"product_id":"raymarine-interface-micro-talk-micronet-seatalkng-nmea2000-sans-fil","title":"Micro-Talk interface, wireless Micronet to SeatalkNG (Wireless Wind)","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine Micro-Talk\u003c\/strong\u003e interface (reference E70361) is an essential bridge designed to integrate existing Micronet wireless sensors, such as Micronet wind sensors, into modern SeaTalkNG and NMEA2000 networks. It allows Micronet equipment owners to retain their reliable sensors while gaining NMEA2000 connectivity on their current Raymarine navigation system.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The primary function of the \u003cstrong\u003eRaymarine Micro-Talk\u003c\/strong\u003e interface is to convert Micronet wireless sensor data into a format compatible with the NMEA2000 protocol, the industry standard for marine equipment communication. Powered directly via the NMEA2000 bus, this interface simplifies installation by eliminating the need for a separate power source. Its robust design provides waterproofing compliant with IPX6 and IPX7 standards, ensuring reliable performance in the most demanding marine environments. The device weighs 0.581 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eStrategic positioning\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eRaymarine Micro-Talk\u003c\/strong\u003e interface serves as a strategic solution for the gradual upgrade of navigation systems. Unlike a complete replacement of Micronet sensors with native NMEA2000 sensors (such as those in the Raymarine i70s range or competing systems like B\u0026G Triton or Garmin gWind, which offer their own wireless solutions), this interface provides a cost-effective and efficient option. It preserves the initial investment in Micronet sensors while enabling access to multifunction displays (MFD) and modern instruments compatible with NMEA2000\/SeaTalkNG.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723800469844,"sku":"E70361","price":256.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_6d2d1b44-f7a2-43cb-a582-9524e0e9abca.jpg?v=1779962517"},{"product_id":"raymarine-kit-cablage-pilote-evolution-nmea2000","title":"Wiring kit for Evolution driver","description":"\u003cp\u003e\n    The \u003cstrong\u003eRaymarine Evolution R70160 autopilot wiring kit\u003c\/strong\u003e is an essential component designed for the installation and integration of your Evolution autopilot system. This kit ensures reliable and optimized connectivity within your NMEA2000 network, a fundamental element for the performance and precision of your autopilot.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimal NMEA2000 integration\u003c\/h3\u003e\n\u003cp\u003e\n    The architecture of Raymarine Evolution autopilots relies on robust communication via the NMEA2000 standard. The \u003cstrong\u003eR70160\u003c\/strong\u003e provides the necessary connections to ensure stable data transmission between the different components of the Evolution system, including the EV-1 sensor, the ACU control unit, and compatible multifunction displays (though the specific components of the kit are not detailed, its role is to ensure this connectivity). Using a dedicated wiring kit like this one is essential to avoid interference and signal loss, thus guaranteeing maximum responsiveness and precision from the autopilot.\n\u003c\/p\u003e\n\n\u003ch3\u003eRaymarine compatibility and reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Designed by Raymarine, this wiring kit is specifically adapted to the technical requirements and quality standards of the Evolution range. By choosing the \u003cstrong\u003eR70160 kit\u003c\/strong\u003e, you ensure perfect compatibility with the components of your Evolution autopilot, unlike generic wiring solutions that could compromise system performance or durability. Manufactured in Hungary to the brand's standards, it aims to provide a robust solution for the marine environment. Weighing 0.491 kg, it fits easily into the technical space of your vessel.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723801649492,"sku":"R70160","price":204.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/kit-de-cablage-pour-pilote-evolution_r70160-1.png?v=1776786804"},{"product_id":"garmin-kit-prises-rj45-reseau-marine","title":"RJ45 connector kit (pack of 2)","description":"\u003cp\u003e\n    The Garmin RJ45 connector kit (reference 010-10603-00) is an essential component for building and maintaining Garmin marine Ethernet networks. Designed for installations requiring specific cable lengths, this kit allows users to make custom-length Ethernet crossover cables, optimizing routing and minimizing excess cable on board. Unlike pre-assembled cables, this kit provides the flexibility needed for complex setups where standard lengths are unsuitable. It is compatible with all devices in the Garmin marine network, ensuring stable connectivity for radar data, depth sounder, and detailed charting.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This kit is specifically designed for Ethernet crossover cables in the Garmin marine network. It supports cable lengths up to 100 meters between devices, meeting the network’s performance standards. The connectors are assembled using a precise wiring sequence, differentiated as Side A and Side B, as detailed in the technical documentation. This attention to detail ensures signal integrity and compatibility with Garmin’s network architecture. Installation requires careful attention to the steps of stripping, wire arrangement, crimping, and tightening the strain relief nut (without over-tightening).\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Installing RJ45 connectors requires specific tools, including a modular crimping tool and a 15 mm wrench for the strain relief nut. The specific wiring sequences for Side A and Side B, as detailed in the technical documentation, must be strictly followed to ensure the crossover cable functions correctly. Each kit contains two connectors, allowing for the assembly of one complete cable or the repair of two ends. This product is part of Garmin’s cabling accessories range, offering a technical solution for the specific installation needs of marine networks, similar to the cabling options available for Raymarine or B\u0026G systems, which also require specific connectors for their proprietary Ethernet networks.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53723842183508,"sku":"010-10603-00","price":10.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_34b8cf97-740b-48a8-8f39-8766cc735f6e.jpg?v=1779186373"},{"product_id":"garmin-cable-alimentation-donnees-gps-19x-hvs","title":"Power\/data cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin 010-11824-00 power\/data cable\u003c\/strong\u003e is an essential component designed to ensure connectivity and power supply for Garmin GPS receivers, including the GPS 19x HVS model. This cable enables reliable integration of your device into the vessel's electrical network while transmitting necessary navigation data to other compatible instruments.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This specific cable guarantees a stable power supply link for the device, essential for continuous operation at sea. Simultaneously, it facilitates the exchange of precise, real-time GPS data with other onboard systems, such as chartplotters, multifunction displays, or autopilots, via integrated data interfaces. Unlike generic cables, using an original Garmin component ensures flawless electrical compatibility and data protocol, avoiding interference or signal loss that could compromise navigation reliability.\n\u003c\/p\u003e\n\n\u003ch3\u003eReliability and Garmin Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    As an original Garmin part, this 010-11824-00 cable is designed to meet the manufacturer's exact technical specifications, ensuring optimal compatibility and performance with the GPS 19x HVS. Its design is optimized for durability and resistance to demanding marine environments, thereby protecting the integrity of your Garmin navigation system over the long term. It is essential for replacing or initially installing the GPS 19x HVS, ensuring the longevity and accuracy of your setup.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53723875803476,"sku":"010-11824-00","price":31.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_27350575-6fd4-4f52-86b3-d07932a433bc.png?v=1779186373"},{"product_id":"mastervolt-interface-masterbus-nmea-2000-marine","title":"NMEA 2000 MasterBus Interface","description":"\u003cp\u003e\n    The MASTERVOLT MasterBus NMEA 2000 interface is a critical gateway designed to establish robust bidirectional communication between the proprietary MasterBus network and the NMEA 2000® industry standard. This device, with part number 77031800, enables seamless integration of Mastervolt energy management systems with navigation and propulsion equipment from various brands compatible with NMEA 2000, such as B\u0026G, Garmin, or Raymarine. It serves as a key component for any modern marine system requiring full data interoperability.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and Technical Capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    The interface manages bidirectional exchange of PGN (Parameter Group Number) data. For integrating NMEA 2000 data into MasterBus, the user selects the desired variables via the interface menu, which can be displayed on a MasterView screen or through the MasterView System software on a PC. This includes GPS position data (longitude, latitude, time, date), navigation data (waypoint, distance, bearing, ETA), speed and heading (ground, surface), environmental data (water temperature, wind speed and angle, wind direction), as well as engine parameters (RPM, oil pressure, water temperature, gear direction, engine battery voltage) and rudder angle. The five engine instances can be named for clear identification.\n\u003c\/p\u003e\n\u003cp\u003e\n    Conversely, to transfer MasterBus data to the NMEA 2000 network, the interface allows defining the addresses of corresponding MasterBus and NMEA variables. This advanced configuration requires an installer connection. The interface supports a wide range of NMEA 2000 PGNs for MasterBus equipment, including detailed DC battery statuses (state of charge, voltage, current, temperature), charger and inverter statuses, fluid levels, and switch bank control. Three fundamental PGNs (ISO Request 59904, ISO Address Claim 60928, Product Information 126996) are always transmitted from MasterBus to NMEA, ensuring basic system recognition.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The interface is configured via the \"Configuration\" tab in MasterBus, accessible from a MasterView screen or the MasterView System software. The device is designed for mounting on a 30 mm DIN rail, facilitating integration into protected electrical panels. With a current draw of less than 40 mA and a Load Equivalency Number (LEN) of 0, it does not significantly contribute to the electrical load of the NMEA 2000 network. Its IP21 protection rating indicates resistance to vertical water droplet ingress, making it suitable for indoor installation, protected from direct splashes. Its compact dimensions of 66 x 78 x 32 mm and weight of approximately 70 grams (without cable) make it a discreet component. The interface is supplied with an NMEA cable, a MasterBus cable, a MasterBus terminator, and a user manual, ensuring a complete and standards-compliant installation. Its NMEA 2000® certification guarantees compliance and reliability within the network.\n\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":53723887305044,"sku":"77031800","price":376.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_dff14aab-1b4c-40c2-8411-2e2820edd155.jpg?v=1778022635"},{"product_id":"adaptateur-micro-opc-2522l","title":"OPC-2522L microphone adapter","description":"\u003cp\u003e\n    The \u003cstrong\u003eOPC-2522L microphone adapter\u003c\/strong\u003e is an ICOM accessory designed for marine radio communication environments. Aligned with ICOM’s \"Made in Japan\" philosophy, it benefits from the brand’s reputation for reliability and robustness. This adapter is intended to facilitate the connection of microphones, thereby optimizing the communication capabilities of ICOM systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and ICOM Quality\u003c\/h3\u003e\n\u003cp\u003e\n    The OPC-2522L is part of ICOM’s range of accessories designed to extend the functionality of radio communication equipment. Its primary function is to provide a stable and clear interface for microphone audio signals. While detailed technical specifications regarding specific connector types or exact compatibility with ICOM microphone or radio models are not included in the provided information, this adapter is designed to integrate seamlessly into an existing ICOM ecosystem, ensuring the audio transmission quality characteristic of the brand.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the ICOM Range\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eOPC-2522L microphone adapter\u003c\/strong\u003e serves as a flexible component for marine communication installations. Similar to optional microphones available for ICOM portable VHF radios such as the IC-M25EURO EVO (HM-213), IC-M37E (HM-213), or IC-M73EURO\/PLUS (HM-167, HM-202), the OPC-2522L enables adaptation and optimization of peripheral device use. It ensures essential connectivity for users seeking to customize their radio communication setup. Its design reflects ICOM’s commitment to providing comprehensive and scalable solutions, allowing sailors to benefit from maximum communication clarity in various configurations while maintaining the brand’s performance and durability standards.\n\u003c\/p\u003e","brand":"ICOM","offers":[{"title":"Default Title","offer_id":55608503271764,"sku":"OPC-2522L","price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_b00edf8e-1b60-479b-ba44-056d2da4d404.png?v=1778057757"},{"product_id":"cordon-alimentation-opc-891a","title":"OPC-891A power cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eOPC-891A power cable\u003c\/strong\u003e is an essential accessory designed by Icom for the Icom marine VHF transceiver GM600. Identified by the SKU reference OPC-891A, this cable ensures a direct and reliable connection for powering the device. It is specifically intended for commissioning and operational testing of the GM600, operating exclusively with 12 V DC power sources.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Specific Use of the OPC-891A\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for the Icom GM600 transceiver, the \u003cstrong\u003eOPC-891A cable\u003c\/strong\u003e allows direct 12 V DC power supply. Its primary role is to facilitate initial function checks or installations requiring a standard 12 V DC source. The GM600 manual explicitly mentions it for \"Betriebsprüfung\" (operational verification) with a \"nur 12 V Gleichstrom\" (only 12 V DC) source.\n\u003c\/p\u003e\n\n\u003ch3\u003eIcom Technical Positioning\u003c\/h3\u003e\n\u003cp\u003e\n    In Icom's accessory range for the GM600, the \u003cstrong\u003eOPC-891A cable\u003c\/strong\u003e stands out for its simplicity and specificity. It is supplied with the GM600 for direct 12 V DC power needs, particularly for testing. In comparison, the PS-310 power supply, also included with the GM600 and using the OPC-2352 cable, is the main power solution. The PS-310 accepts input voltages from 10.8 to 15.6 V DC or from 21.6 to 31.2 V DC to provide a regulated 12.6 V DC output. The OPC-891A is therefore a more direct solution for existing 12 V DC systems, offering an alternative for testing or basic power needs without requiring an external regulation unit such as the PS-310.\n\u003c\/p\u003e","brand":"ICOM","offers":[{"title":"Default Title","offer_id":55608578113876,"sku":"OPC-891A","price":8.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_cfb42a70-e4ee-4266-933d-8d2608932a29.webp?v=1778057760"},{"product_id":"icom-cable-connexion-opc-1540-vhf-6m","title":"OPC-1540 connection cable","description":"\u003cp\u003eThe \u003cstrong\u003eOPC-1540 connection cable\u003c\/strong\u003e by \u003cstrong\u003eIcom\u003c\/strong\u003e is a 6-meter cable specifically designed for connecting remote accessories to your marine VHF installation, including the HM-162E control microphone. It ensures reliable transmission of communication and power signals between the radio base and the external control station, guaranteeing optimal audio quality and control.\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and scalability of the Icom system\u003c\/h3\u003e\n\u003cp\u003eThis cable provides essential mounting flexibility for complex marine setups. Unlike standard cables with limited reach, the OPC-1540 is designed to be modular. It can be paired with one or two additional extension cables from the same range, the OPC-1541 (also 6 meters), allowing a maximum remote distance of 18 meters. This architecture makes it the ideal solution for vessels requiring a communication station far from the main transceiver.\u003c\/p\u003e\n\n\u003ch3\u003eAudio connection and external speakers\u003c\/h3\u003e\n\u003cp\u003eThe OPC-1540 cable bundle also includes the necessary specifications for directly connecting external waterproof speakers, such as the 2.5-inch or 4-inch Polyplanar models (5W RMS \/ 10W PEAK). Wiring identification is simplified for installers: the yellow wire serves as the audio hot spot, while the black wire corresponds to the audio ground. This design enables clean and quick integration of sound amplification systems on deck or in the cockpit.\u003c\/p\u003e","brand":"ICOM","offers":[{"title":"Default Title","offer_id":55718270337364,"sku":"OPC-1540","price":113.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_75ea3a2b-2432-4aa4-9645-9b202ee9f68a.webp?v=1778019774"},{"product_id":"icom-rallonge-opc-1541-accessoire-marine","title":"OPC-1541 Extension Cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eOPC-1541 extension cable\u003c\/strong\u003e is an essential extension cable for ICOM marine radio systems, providing increased flexibility in positioning remote microphones. Designed to extend the reach of CommandMics and compatible speaker microphones, this extension ensures reliable and robust connectivity for optimal use at sea.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications: OPC-1541 Extension Cable\u003c\/h3\u003e\n\u003cp\u003e\n    With a length of \u003cstrong\u003e6.1 meters (20 feet)\u003c\/strong\u003e, the \u003cstrong\u003eOPC-1541 extension cable\u003c\/strong\u003e allows remote positioning of compatible ICOM microphones (such as models HM-162, HM-195, HM-205, HM-229) from the main VHF unit. This extension is compatible with a wide range of ICOM fixed VHF radios, including models IC-M330GE, IC-M423GE, IC-M430E, IC-M510BB, IC-M410BB, IC-M510E EVO, IC-M510EAIS EVO, and IC-M605EURO, facilitating integration into complex or multi-station navigation setups.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and Installation Benefits\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike portable ICOM VHF radios such as the IC-M25EURO EVO or IC-M37E, which integrate all functions into a compact unit, fixed ICOM radios offer superior modularity. The \u003cstrong\u003eOPC-1541 extension cable\u003c\/strong\u003e is a key accessory in this approach, enabling remote installation of the microphone or CommandMic. This capability is particularly advantageous for vessels requiring the main VHF unit to be installed in a technical compartment while keeping control accessible from the helm, flybridge, or chart table. It stands out from standard short cables by offering significant layout freedom, optimizing ergonomics and communication efficiency on board.\n\u003c\/p\u003e","brand":"ICOM","offers":[{"title":"Default Title","offer_id":55718271451476,"sku":"OPC-1541","price":76.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5520b8e7-ec16-4d74-bb4b-52f6d80c4c2e.png?v=1778057757"},{"product_id":"icom-ma-510tr-transpondeur-ais-classe-b","title":"NMEA Cable OPC-IFMA510TR","description":"\u003cp\u003e\n    The \u003cstrong\u003eNMEA Cable OPC-IFMA510TR\u003c\/strong\u003e is an essential accessory designed to optimize connectivity for the ICOM MA-510TR Class B AIS transponder. This cable enables full integration of the MA-510TR into a marine electronics network, facilitating data exchange via NMEA 2000™ and NMEA 0183-HS interfaces.\n\u003c\/p\u003e\n\n\u003ch3\u003eNMEA 2000™ and NMEA 0183-HS Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    With the \u003cstrong\u003eNMEA Cable OPC-IFMA510TR\u003c\/strong\u003e, the ICOM MA-510TR transponder fully leverages its NMEA 2000™ and NMEA 0183-HS compatibility. The NMEA 2000™ standard, known for its \"plug-and-play\" capability and high throughput, allows seamless interconnection with modern equipment such as chartplotters, radars, or VHF radios. This connectivity ensures AIS targets are displayed directly on an external multifunction display, enhancing situational awareness. Additionally, support for NMEA 0183-HS ensures compatibility with a wide range of older or specialized devices, offering superior integration flexibility compared to transponders limited to a single protocol.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    Using the \u003cstrong\u003eNMEA Cable OPC-IFMA510TR\u003c\/strong\u003e with the MA-510TR unlocks advanced features. For example, it enables the transmission of individual Digital Selective Calling (DSC) calls directly from an AIS target selected on the transponder to a compatible ICOM VHF radio (such as IC-M605EURO, IC-M510E, IC-M506EURO, etc.). This capability simplifies safety communications at sea. Unlike solutions that only provide a USB interface for AIS data (such as some Class B AIS units), the MA-510TR, via this cable, integrates directly into NMEA networks for real-time interaction with essential navigation and communication systems, positioning the MA-510TR as a versatile solution for onboard safety and communication.\n\u003c\/p\u003e","brand":"ICOM","offers":[{"title":"Default Title","offer_id":55718276530516,"sku":"OPC-IFMA510TR","price":124.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_ec84e16b-0397-4408-ae79-80a9c2f13086.png?v=1778019943"},{"product_id":"garmin-connecteur-t-nmea-2000-multiport","title":"NMEA 2000® multiport T-connector","description":"\u003cp\u003e\n    The Garmin NMEA 2000® multiport T-connector (010-11078-01) is designed to optimize the architecture of NMEA 2000 networks aboard vessels. Unlike standard T-connectors (reference 010-11078-00), which connect a single device to the backbone, this multiport model consolidates up to four drop cables into a single unit. This consolidation reduces break points and mechanical stress on long backbones, providing cleaner and more reliable cable management.\n\u003c\/p\u003e\n\n\u003ch3\u003eNMEA 2000 Network Optimization\u003c\/h3\u003e\n\u003cp\u003e\n    This connector is part of Garmin’s NMEA 2000 network accessories range, offering an alternative for more structured installations. While a standard T-connector is used to connect a single device to the main backbone, the multiport model \u003cstrong\u003e010-11078-01\u003c\/strong\u003e streamlines the connection of multiple devices. It uses NMEA 2000 micro-connectors, ensuring compatibility with Garmin-certified NMEA 2000 cables and devices, as well as those from other manufacturers compliant with the standard. Its design simplifies installation by consolidating connection points, reducing deployment time.\n\u003c\/p\u003e\n\n\u003ch3\u003eEnhanced Integration and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The design of this multiport T-connector improves the overall reliability of the NMEA 2000 network. Its rigid construction makes it less prone to potential failures, offering a more stable solution than multiple individual T-connectors. By grouping connections, it contributes to a tidier cable layout, which is critical in a marine environment, and simplifies future troubleshooting. This component is an asset for installations where NMEA 2000 device density is high and space management is a constraint, contributing to a more robust and professional network.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Multiport","offer_id":55860584120660,"sku":"010-11078-01","price":53.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_87876a90-89cc-47dd-9f8f-eddab359f388.jpg?v=1779194731"},{"product_id":"garmin-kit-demarrage-nmea-2000-reseau-marin","title":"NMEA 2000 starter kit","description":"\u003cp\u003e\n    The Garmin NMEA 2000 starter kit (reference 010-11442-00) is designed to establish a basic NMEA 2000 communication network aboard your vessel. The NMEA 2000 standard, successor to NMEA 0183, enables \"plug-and-play\" interconnection of marine sensors and displays, facilitating data exchange between electronic devices. This kit provides the essential components to build a linear backbone network and connect the first devices.\n\u003c\/p\u003e\n\n\u003ch3\u003eBuilding an NMEA 2000 network\u003c\/h3\u003e\n\u003cp\u003e\n    This Garmin kit includes the necessary elements to start the architecture of an NMEA 2000 network. The network backbone, the main communication path, consists of T-connectors and cables. The kit includes two T-connectors, allowing connection of devices or power supply. Network termination is ensured by a male and a female terminator, essential at each end of the backbone to guarantee signal integrity.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and power supply\u003c\/h3\u003e\n\u003cp\u003e\n    The kit includes a 2-meter NMEA 2000 power cable, designed to connect to a 12 V DC power source via an auxiliary switch to prevent battery discharge. It also contains a 2-meter NMEA 2000 drop cable to link a device to the backbone, as well as a 6-meter NMEA 2000 backbone cable to extend the network. Components use NMEA 2000 micro-connectors, compatible with Garmin-certified devices and other manufacturers, such as the ECHOMAP and GPSMAP series.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860588675412,"sku":"010-11442-00","price":75.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/garmin-kit-de-demarrage-nmea-2000_010-11442-00-1.webp?v=1779194806"},{"product_id":"garmin-cable-adaptateur-otg-gpsmap-8400-8600","title":"OTG adapter cable (GPSMAP® 8400\/8600)","description":"\u003cp\u003e\n    Specifically designed for Garmin GPSMAP® 8400 and 8600 chartplotters, the Garmin OTG adapter cable (part number 010-12390-11) extends the connectivity and power capabilities of your marine navigation system. This 1.8-meter (6-foot) cable is a robust marine-grade solution that enables secure integration of external devices.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatile Connectivity and Power\u003c\/h3\u003e\n\u003cp\u003e\n    The Garmin OTG (On-The-Go) adapter cable provides a USB power output up to 2.5 W. This power is sufficient to run various USB peripherals, including media sticks such as Chromecast or Roku. Unlike a standard USB connection, this cable is specifically designed for marine environments, ensuring a watertight and durable connection essential for onboard reliability.\n\u003c\/p\u003e\n\n\u003ch3\u003eDevice Integration and Video Streaming\u003c\/h3\u003e\n\u003cp\u003e\n    In addition to charging USB devices, the 010-12390-11 cable allows powering streaming devices. Paired with a coupler and an HDMI cable (not included), it enables wireless video streaming to your GPSMAP® 8400 or 8600 chartplotter. This feature turns the Garmin system into an integrated multimedia platform, surpassing pure chart display capabilities and providing an enhanced user experience for the GPSMAP® 8400\/8600 series.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860629897556,"sku":"010-12390-11","price":79.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f3a9db8a-a0a6-4cb2-8e8e-2edc27b4cd6a.jpg?v=1779195281"},{"product_id":"garmin-cable-reseau-bluenet-15m-marine","title":"BlueNet™ Network Cable 15 m","description":"\u003cp\u003e\n    The Garmin BlueNet™ network cable 15 m (50 ft), part number 010-12528-03, is an essential component for establishing a high-speed marine network. Designed to connect Garmin BlueNet devices together, or to a Garmin BlueNet 20 switch and a Garmin BlueNet 30 gateway, it provides a reliable and high-performance communication infrastructure for modern marine electronics systems.\n\u003c\/p\u003e\n\u003ch3\u003eBlueNet technology for advanced connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This cable integrates Garmin BlueNet technology, successor to the Garmin Marine Network, offering significant improvements. It uses 4 twisted pairs combined for data transmission and Wake on LAN (WoL) functionality, enabling connection speeds up to 1 Gbps. This capacity supports a greater number of video streams, improved resolutions, and the integration of more sophisticated sensors and devices, such as the LiveScope™ system or GMR™ xHD3 radars. The compact marine-grade water-resistant connectors, similar in size to NMEA 2000® connectors, are specifically designed for the marine environment, providing better cable management and superior durability compared to standard RJ45 connectors from the previous Garmin Marine Network.\n\u003c\/p\u003e\n\u003ch3\u003eNetwork integration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The Garmin BlueNet network cable ensures extensive compatibility with a wide range of Garmin BlueNet devices. It also allows connection of third-party devices, such as IP cameras, without requiring a specific marine-grade PoE isolation coupler. For installations integrating equipment from the previous Garmin Marine Network, this cable can be used in combination with a Garmin BlueNet 30 gateway, ensuring smooth transition and coexistence of systems. Each cable segment must not exceed 87 m (285 ft) and must not include more than one coupler, such as the Garmin BlueNet cable coupler (010-12531-00), to maintain optimal network performance. Garmin recommends using only original BlueNet network cables to ensure compliance with minimum performance specifications.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"15 m","offer_id":55860634681684,"sku":"010-12528-03","price":53.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_9c05b79f-a566-4558-8d5d-df4715f227f7.jpg?v=1779195436"},{"product_id":"garmin-cable-adaptateur-reseau-rj45-bluenet-femelle","title":"RJ45 female to BlueNet female network adapter","description":"\u003cp\u003e\n    Designed to simplify system integration, the \u003cstrong\u003eGarmin RJ45 female to BlueNet female network adapter (010-12531-11)\u003c\/strong\u003e enables connection of Garmin devices with a BlueNet connector to systems using the legacy Garmin Marine Network. This adapter is essential for hybrid configurations, ensuring compatibility between existing network technologies and Garmin BlueNet innovations.\n\u003c\/p\u003e\n\n\u003ch3\u003eBlueNet and Legacy Garmin Marine Network integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Garmin BlueNet network represents the evolution of the Garmin Marine Network, offering connection speeds up to 1 Gbps and compact, water-resistant connectors similar in size to NMEA 2000. In contrast, the Legacy Garmin Marine Network uses standard RJ45 connectors, less suited to marine environments and requiring large locking collars. This \u003cstrong\u003e010-12531-11\u003c\/strong\u003e adapter is specifically designed to address this physical connector difference, enabling direct connection between the two port types.\n\u003c\/p\u003e\n\n\u003ch3\u003eUse cases and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This adapter is particularly useful for connecting certain Garmin BlueNet devices, such as OnDeck GTB 10 hubs, Fusion PartyBus™ compatible stereos, or IP cameras, directly to a Legacy Garmin Marine Network system without requiring a BlueNet 30 gateway. However, it is important to note that for most other Legacy Garmin Marine Network devices, a Garmin BlueNet 30 gateway remains necessary for full BlueNet network integration. The cable provides physical conversion from the RJ45 female interface to the BlueNet female connector, with a robust design ensuring reliable connections in marine environments.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860636221780,"sku":"010-12531-11","price":27.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_971f2cf2-902f-4f97-81e4-28320cd048a6.jpg?v=1779195471"},{"product_id":"garmin-connecteur-t-nmea-2000-micro-un-port","title":"NMEA 2000 T-connector, One Port","description":"\u003cp\u003e\n    Designed for extending marine network architectures, the Garmin NMEA 2000 T-connector (part number 010-12935-10) is an essential component for integrating sensors and displays. It enables the connection of any NMEA 2000-compatible device to the main network backbone, ensuring smooth communication between onboard equipment. This connector is a revised version, optimized for installation, succeeding part number 010-11078-00.\n\u003c\/p\u003e\n\u003ch3\u003eNMEA 2000 Connectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    NMEA 2000 is a plug-and-play communication standard that replaced NMEA 0183, enabling the interconnection of marine devices. This T-connector uses NMEA 2000 micro-connectors, standard for Garmin sensors and displays, ensuring broad compatibility. It serves as a fundamental element in building a linear NMEA 2000 backbone, essential for proper network operation. Each device must connect to the backbone via a T-connector, and this Garmin model provides a single port for this function.\n\u003c\/p\u003e\n\u003ch3\u003eOptimized Design and Marine Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The design of the 010-12935-10 T-connector includes a notable feature: it is offset by 45 degrees compared to previous iterations. This modification can simplify installation in confined spaces, improving wiring ergonomics. Manufactured to OEM (Original Equipment Manufacturer) quality standards and with marine-grade construction, this connector ensures robustness and reliability suited to the marine environment. It is designed to withstand marine constraints and guarantee the longevity of your NMEA 2000 installation.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"1 port","offer_id":55860651426132,"sku":"010-12935-10","price":19.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_533fc7d1-5d58-41b0-8ae5-8c19c9602850.jpg?v=1779195725"},{"product_id":"garmin-connecteur-t-nmea-2000-4-ports-reseau-marine","title":"NMEA 2000 T-connector multiport, 4 ports","description":"\u003cp\u003e\n    Designed to optimize NMEA 2000 network architecture, the Garmin 4-port (010-12935-11) multiport T-connector streamlines the setup of a robust and clean backbone. This component integrates four NMEA 2000 micro ports, allowing up to four devices to be centralized at a single backbone junction. Unlike a standard Garmin T-connector (such as 010-11078-00), which handles only one branch, it provides a consolidated solution for installations requiring multiple, closely spaced connection points.\n\u003c\/p\u003e\n\u003ch3\u003eNMEA 2000 network integration and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The rigid design of this connector minimizes stress points and breakage risks commonly associated with long backbone cables or assemblies of individual T-connectors. Marine-grade components ensure long-term reliability in a nautical environment. This device reduces overall installation time while improving NMEA 2000 network resilience.\n\u003c\/p\u003e\n\u003ch3\u003eNMEA 2000 standard with Garmin\u003c\/h3\u003e\n\u003cp\u003e\n    The NMEA 2000 standard, successor to NMEA 0183, is a plug-and-play communication interface for interconnecting marine sensors and displays. A functional NMEA 2000 network requires a nominal 12 Vdc power supply and proper termination at both ends of the backbone. The Garmin 4-port multiport T-connector integrates seamlessly into this architecture, simplifying wiring and stabilizing data links.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"4 ports","offer_id":55860655522132,"sku":"010-12935-11","price":53.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_752b3069-931a-418f-a345-dd17ee948d6e.jpg?v=1779195749"},{"product_id":"garmin-kit-connecteur-cloison-livescope","title":"LiveScope™ Garmin bulkhead connector kit","description":"\u003cp\u003e\n    Designed for clean and functional integration, the \u003cstrong\u003eGarmin LiveScope™ bulkhead connector kit\u003c\/strong\u003e (part number 010-13350-00) allows flush mounting of the extension cable for your LiveScope™ system. This solution enables quick connection and disconnection of the transducer, optimizing use for boats requiring frequent handling or discrete installation. This kit is compatible with the entire LiveScope™ range, including LiveScope™ Plus LVS34, LiveScope™ Plus, LiveScope™ XR LVS62, and LiveScope™ XR systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the Garmin bulkhead connector kit requires a minimum clearance of 60 mm behind the mounting surface and the use of a 37 mm hole saw for cable passage. For secure attachment, the kit uses 8 mm screws to assemble the support halves. If access behind the mounting surface is limited, 20 mm screws are used to secure the connector bracket. In this case, 2.7 mm pilot holes are required. This installation approach ensures a secure and durable integration, similar to the mounting standards of other Garmin accessories such as transducer mounts or NMEA 2000 through-hull fittings.\n\u003c\/p\u003e\n\n\u003ch3\u003eKit contents\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003e010-13350-00\u003c\/strong\u003e kit includes a snap-in base, a finishing cover, a weather-resistant cap to protect the connector when not in use, and all necessary mounting components. It is essential to note that the LiveScope™ extension cable is not included and must be purchased separately, with available lengths of 1 m, 3 m, or 9 m, allowing installation flexibility based on the vessel's configuration and the position of the sonar module.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860675936596,"sku":"010-13350-00","price":36.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_7ffe7f3e-94b0-4c2f-940b-b2417334b2ad.jpg?v=1779196021"},{"product_id":"garmin-kit-demarrage-nmea-2000-reseau-marin-010-12935-00","title":"NMEA 2000 starter kit, colored design","description":"\u003cp\u003e\n    The Garmin NMEA 2000 starter kit, part number 010-12935-00, is designed to set up a basic NMEA 2000 network on your vessel. It enables standardized and bidirectional communication between marine sensors and display devices, with a data rate of up to 250 Kb\/sec. This standard, successor to NMEA 0183, simplifies the integration of various electronic equipment for a consistent navigation experience.\n\u003c\/p\u003e\n\n\u003ch3\u003eGarmin NMEA 2000 network components\u003c\/h3\u003e\n\u003cp\u003e\n    Garmin uses NMEA 2000 micro-connectors for its devices, sensors, and T-connectors, ensuring compatibility with the NMEA 2000 ecosystem. The kit includes all necessary components for a first installation: a 2-meter drop cable to connect a device, a 6-meter backbone cable to extend the main network, a 2-meter power cable with a 3 A fuse to power the network, two T-connectors for connecting devices to the backbone, as well as a male and female terminator connector, essential for maintaining signal integrity at the network ends.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This kit is compatible with a range of Garmin devices, including the ECHOMAP and GPSMAP series, as well as other NMEA 2000-certified marine instruments. It provides the foundation for connecting sensors, instruments, engine data, and navigation data. Unlike more complex installations requiring longer backbone cables (up to 100 m) or multi-powered configurations with isolators, this kit targets a simple and direct implementation for an initial small to medium-sized network. For larger or specific installations, additional components such as 10 m, 30 m cables, or angled connectors may be required, but this kit offers a functional starting point.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860937195860,"sku":"010-12935-00","price":83.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_16baaa52-b267-458a-a356-29554f3e422c.jpg?v=1779199536"},{"product_id":"raymarine-terminaisons-seatalk-ng-connectique-marine","title":"SeaTalk NG Raymarine Terminations","description":"\u003cp\u003e\n    The Raymarine SeaTalkng terminators A06031 are essential components for the proper functionality of any SeaTalkng network. This proprietary interconnection bus system, developed by Raymarine, links the brand's products via a main backbone cable and spur cables.\n\u003c\/p\u003e\n\u003ch3\u003eOperation and importance of SeaTalkng terminators\u003c\/h3\u003e\n\u003cp\u003e\n    Designed to ensure correct and stable data transmission, SeaTalkng terminators must be installed at each end of the backbone cable. Missing these terminators or incorrect installation can lead to network malfunctions, data loss, or unstable communication between instruments. Unlike simpler networks, SeaTalkng, similar to NMEA 2000, requires active terminators at both ends to prevent signal reflections that degrade data quality. Products such as ST70 instruments can also act as bridges to connect older SeaTalk(1) systems or NMEA 2000 products via adapter cables.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The SeaTalkng system uses small-diameter connectors and color coding to facilitate installation and reduce the risk of errors: the backbone cable is blue, the spur cables are white, and the power cable is black with a red stripe. Raymarine offers a range of cable lengths and connection pieces (three-way, five-way, or inline) to suit various configurations. The A06031 terminators integrate directly into this architecture, ensuring signal integrity across the entire network.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862725673300,"sku":"A06031","price":14.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_685c1a43-5747-44b5-b919-a1ce338b3e60.jpg?v=1779215205"},{"product_id":"raymarine-cable-adaptation-seatalk-ng-seatalk1","title":"SeaTalk NG to SeaTalk1 adapter cable","description":"\u003cp\u003e\n    Designed for flexibility in marine networks, the Raymarine SeaTalk NG to SeaTalk1 adapter cable A06047 enables the integration of instruments and sensors equipped with the older proprietary SeaTalk(1) interface into a modern SeaTalkng network. This solution is essential for vessel owners looking to modernize their navigation system without replacing all existing equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eRaymarine System Integration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Raymarine’s SeaTalkng system is an interconnection bus that uses a backbone and spur cables to connect products. The A06047 cable acts as a critical bridge, allowing SeaTalk(1) devices to communicate within this newer architecture. While products like ST70 instruments may offer more complex bridging functions, this adapter cable focuses on direct physical connectivity, simplifying integration for specific installations where the SeaTalk(1) device is close to the SeaTalkng network. It differs from NMEA 2000 adapter cables, which target interoperability with non-Raymarine equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Design and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The A06047 adapter cable leverages the SeaTalkng design, which prioritizes ease of installation. Small-diameter connectors and color-coded cables (blue for backbone, white for spurs, red stripe for power) minimize connection errors. This approach eliminates the need to cut or splice cables, providing a plug-and-play solution. Integrating SeaTalk(1) products via this cable allows users to benefit from SeaTalkng advantages, such as a distributed architecture for power and data transmission, while optimizing investment in existing equipment.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862785245524,"sku":"A06047","price":17.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_ce30ceb7-7db1-4573-b11b-5b7cf588fa4d.jpg?v=1779215510"},{"product_id":"raymarine-cable-seatalk-ng-vers-seatalk2-adaptateur-reseau","title":"SeaTalk NG to SeaTalk2 cable","description":"\u003cp\u003e\n    Designed for system integration, the \u003cstrong\u003eRaymarine SeaTalk NG to SeaTalk2 cable A06048\u003c\/strong\u003e is an essential component for connecting devices using Raymarine’s proprietary SeaTalk2 protocol to a SeaTalkng network. This adapter cable maintains compatibility and extends the lifespan of existing equipment during upgrades or new installations based on Raymarine’s SeaTalkng technology.\n\u003c\/p\u003e\n\n\u003ch3\u003eInteroperability and Network Architecture\u003c\/h3\u003e\n\u003cp\u003e\n    Raymarine’s SeaTalkng system is an interconnection bus consisting of a backbone to which Raymarine products are connected via spur cables. SeaTalkng cables and connectors use color coding for ease of installation: backbone cables are blue, and spur cables are white. This A06048 cable is an adapter that functions as a spur, allowing SeaTalk2 products to integrate into this architecture. Unlike other SeaTalkng adapter cables, which may connect NMEA 2000 devices, it provides a specific gateway for Raymarine’s proprietary SeaTalk2 equipment, such as older instruments or autopilots.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and System Terminology\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the \u003cstrong\u003eSeaTalk NG to SeaTalk2 cable A06048\u003c\/strong\u003e involves connecting one end to a SeaTalkng spur port (typically via a T-connector or a 5-way splitter) and the other to the SeaTalk2 device. It is critical to follow SeaTalkng network installation guidelines, particularly the use of terminators at both ends of the backbone to ensure proper data transmission. The SeaTalkng reference manual (81300-1) emphasizes the importance of terminators for system functionality—a fundamental principle for all components connected to the network, including adapters like the A06048. While this cable ensures reliable connectivity, adherence to SeaTalkng network rules is essential for a stable system.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862787670356,"sku":"A06048","price":18.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_2331b1b9-8cf6-4653-9f69-60bfb9dcf0b9.jpg?v=1779215535"},{"product_id":"raymarine-cable-adaptateur-seatalkng-seatalk1-1m","title":"Cable 1M STNG-ST1","description":"\u003cp\u003e\n    Raymarine’s A06073 adapter cable, 1 metre long, is designed to integrate existing SeaTalk(1) devices into a SeaTalkng network. This \"spur\" (drop) cable connects a SeaTalk(1) device to a SeaTalkng backbone, acting as a bridge between Raymarine’s two proprietary communication architectures.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The SeaTalkng system is Raymarine’s modern interconnect bus, featuring a main backbone and drop cables (spurs) to connect devices. The A06073 cable fits this design by providing bidirectional connectivity between network generations. Unlike standard SeaTalkng spur cables that link native SeaTalkng devices, this model is specifically built for SeaTalk(1) devices, such as older instruments or autopilots. It is distinct from NMEA 2000 adapter cables used for third-party equipment.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This adapter cable allows valuable SeaTalk(1) devices to remain in service during a partial upgrade to a SeaTalkng system. Raymarine’s technical documentation notes that \"limitations\" may arise when connecting SeaTalk(1) products, emphasizing its role as an adapter rather than a full functional equivalent. For example, some SeaTalkng instruments like the ST70 can also act as a bridge, but the A06073 cable provides a direct, dedicated solution for a specific SeaTalk(1) device. Its white colour code identifies it as a spur cable within the SeaTalkng system.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862798844244,"sku":"A06073","price":18.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_e6f634f6-4879-4e3f-a60c-0440f497fe65.jpg?v=1779215676"},{"product_id":"raymarine-terminaison-ligne-stng-reseau-marin","title":"STNG inline termination","description":"\u003cp\u003e\n    Designed specifically for Raymarine's SeaTalkng network, the \u003cstrong\u003eSTNG inline termination A06074\u003c\/strong\u003e is a critical component for ensuring data integrity and reliability aboard. Every SeaTalkng network, similar to NMEA 2000 architectures, requires two terminations, one at each end of the backbone cable. This principle eliminates signal reflections, enabling stable and error-free communication between connected Raymarine instruments.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and functional role of A06074\u003c\/h3\u003e\n\u003cp\u003e\n    Raymarine's SeaTalkng system is a proprietary interconnect bus, structured around a main backbone to which Raymarine products are connected via spur cables. The A06074 termination attaches directly to the ends of this backbone. Without proper termination, the network cannot operate reliably, leading to data loss or equipment malfunctions. Raymarine emphasizes the importance of this component: \"you must install terminators.\"\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical positioning and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    While the A06074 termination is dedicated to the SeaTalkng network, it is important to note that this protocol is designed to interface with other systems. Specific Raymarine products, such as ST70 instruments, can act as gateways to connect SeaTalk(1) products via adapter cables. Similarly, adapter cables are available for integration with NMEA 2000 products. The A06074 termination, by ensuring the proper operation of the SeaTalkng backbone, indirectly contributes to the overall performance of these mixed architectures, unlike a standard NMEA 2000 termination, which would not be mechanically compatible with the SeaTalkng connector.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862817849684,"sku":"A06074","price":18.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_3babc17b-fa7c-4fd5-a652-0a48e6ac5156.jpg?v=1779215697"},{"product_id":"raymarine-cable-1m-seatalk-ng-devicenet-nmea2000-adaptateur","title":"SeaTalk NG \/ DeviceNet 1-meter cable (Male)","description":"\u003cp\u003e\n    Designed for connectivity in marine navigation systems, the \u003cstrong\u003e1-meter SeaTalk NG \/ DeviceNet (Male) Raymarine A06076 cable\u003c\/strong\u003e is an essential adapter for integrating various onboard equipment. This cable facilitates the connection between a Raymarine SeaTalkng network and NMEA2000-compatible devices using a male DeviceNet connection. The Raymarine SeaTalkng range is a proprietary interconnect bus, structured around a main backbone and spur cables to connect individual products.\n\u003c\/p\u003e\n\n\u003ch3\u003eNetwork Integration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This adapter cable allows NMEA2000 products to connect to a SeaTalkng network, thereby extending the capabilities of your navigation system. The specificity of this model lies in its male DeviceNet termination, making it compatible with a wide range of third-party sensors and displays. Unlike blue SeaTalkng backbone cables or white spur cables, adapter cables such as the \u003cstrong\u003eA06076\u003c\/strong\u003e are crucial for heterogeneous connectivity, enabling, for example, the integration of a generic NMEA2000 sensor with a Raymarine ST70 or Axiom display via the SeaTalkng network without requiring a complex gateway.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Installation of the A06076 Cable\u003c\/h3\u003e\n\u003cp\u003e\n    With a length of 1 meter, the \u003cstrong\u003eA06076\u003c\/strong\u003e cable provides flexibility for installations where devices are relatively close. Raymarine uses small-diameter connectors to simplify installation and employs a color-coding system to reduce connection errors. This cable connects as a \"spur\" within the SeaTalkng network while providing DeviceNet\/NMEA2000 compatibility. It is important to note that to ensure correct data transmission, a SeaTalkng system must be terminated at each end of the backbone with dedicated terminators—a fundamental principle for network stability, whether purely SeaTalkng or integrating NMEA2000 elements via adapters.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862818734420,"sku":"A06076","price":48.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_665674d1-88c3-4e0d-a08b-485ac3c765b7.jpg?v=1779215740"},{"product_id":"raymarine-adaptateur-90-cable-seatalkng-marine","title":"90° adapter for STNG M\/F branch cable to multifunction display","description":"\u003cp\u003e\n    Designed for demanding marine installations, the Raymarine A06077 90° STNG cable M\/F adapter is an essential component for optimizing the wiring of multifunction displays and other SeaTalkng equipment. It enables clean and secure connections in tight spaces, preventing excessive bending of SeaTalkng spur cables.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and flexibility of the SeaTalkng network\u003c\/h3\u003e\n\u003cp\u003e\n    Raymarine’s SeaTalkng network is a proprietary interconnect bus structured around a main \"backbone\" (blue cables) to which products are connected via spur cables (white cables). The \u003cstrong\u003eRaymarine A06077\u003c\/strong\u003e adapter facilitates the connection of these spur cables, particularly to multifunction displays, by offering a right-angle connection. This feature is especially useful behind flush-mounted displays where space is limited, allowing for a neat installation and reducing mechanical stress on the connectors.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical benefits and compatibility: the Raymarine A06077 adapter\u003c\/h3\u003e\n\u003cp\u003e\n    While standard straight connectors can pose space constraints, the 90° \u003cstrong\u003eRaymarine A06077\u003c\/strong\u003e adapter provides a specific solution for tight spaces. It integrates seamlessly into the SeaTalkng ecosystem, which is itself compatible with NMEA2000 products via specific adapter cables. Using this adapter improves the overall reliability of your installation by minimizing the risk of disconnections or cable damage caused by poor space management. This adapter is a spare part for Raymarine’s SeaTalkng cabling system.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862820929876,"sku":"A06077","price":18.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_20a16409-fe6d-44d9-8424-81451c4f81c1.jpg?v=1779215761"},{"product_id":"raymarine-adaptateur-devicenet-seatalkng-120mm","title":"DeviceNet Male to SeaTalkng Adapter (120mm)","description":"\u003cp\u003e\n    Designed for system integration, the Raymarine DeviceNet Male to STNG adapter (reference A06078) ensures connectivity between NMEA2000 equipment and the proprietary SeaTalkng network. With a length of 120 mm, this adapter cable allows connecting a device with a DeviceNet male connector (NMEA2000 standard) to a female spur port on a SeaTalkng backbone. This solution is essential for installations requiring interoperability between different marine electronic devices.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and SeaTalkng compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Raymarine’s SeaTalkng system is an interconnection bus that uses a main backbone and spur cables to connect products. The A06078 adapter fits into this architecture by providing a direct gateway for NMEA2000 products. While other adapters or converters (such as those for SeaTalk(1) to SeaTalkng) handle older protocols, this adapter specifically focuses on the physical connector conversion between the NMEA2000 standard (often called DeviceNet) and the SeaTalkng connector. It differs from standard SeaTalkng spur cables in the range, which only connect native Raymarine products.\n\u003c\/p\u003e\n\n\u003ch3\u003eNetwork architecture and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Using this adapter simplifies the extension of a SeaTalkng network by integrating NMEA2000 sensors or displays without requiring complex protocol converters. SeaTalkng cables and connectors are color-coded for ease of installation: backbones are blue, spurs are white. This adapter is a spur-type cable, designed to be connected to a SeaTalkng T-connector or junction block. Its 120 mm length is suited for short, direct connections, reducing clutter and wiring complexity near connection points. It is critical to ensure the SeaTalkng network is properly terminated at both ends of the backbone to guarantee reliable data transmission—a fundamental rule for any network based on CAN bus, including NMEA2000 and SeaTalkng.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862823158100,"sku":"A06078","price":18.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_c02cb369-4c99-4682-b899-e34f7fff951c.jpg?v=1779215784"},{"product_id":"raymarine-cable-seatalkng-devicenet-nmea2000-femelle-120mm","title":"SeaTalk NG \/ Devicenet NMEA2000 female cable (120mm)","description":"\u003cp\u003e\n    The Raymarine A06079 cable is an essential interconnection solution for hybrid marine navigation systems. Designed to facilitate communication between Raymarine’s proprietary SeaTalkng network and NMEA2000-compatible devices (using the DeviceNet connector), this 120 mm female adapter cable ensures smooth integration of equipment. It allows users to connect NMEA2000 sensors or displays to an existing SeaTalkng backbone, extending system capabilities without requiring full equipment replacement.\n\u003c\/p\u003e\n\u003ch3\u003eSeaTalkng and NMEA2000 interfacing\u003c\/h3\u003e\n\u003cp\u003e\n    This Raymarine A06079 adapter cable serves as a key component for network compatibility. While SeaTalkng systems, as described in reference manual 81300-1, provide a robust bus architecture with a main backbone and color-coded spur cables (blue for backbone, white for spurs), the NMEA2000 interface represents the industry standard. The A06079 adapter bridges these two protocols, enabling, for example, NMEA2000 sensors to integrate into a SeaTalkng network dominated by Raymarine ST70 instruments or multifunction displays.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a length of 120 mm, this SeaTalkng \/ DeviceNet NMEA2000 female cable offers installation flexibility for short, direct connections. It fits within Raymarine’s wiring accessory range aimed at simplifying deployment and extension of navigation networks. Unlike standard backbone or spur cables, the A06079 is specifically designed for protocol adaptation, a role similar to other brand adapters that allow, for instance, connection of older SeaTalk(1) products to SeaTalkng networks via dedicated bridges. This type of cable is essential for maintaining data consistency and functionality in embedded systems composed of equipment from different generations or NMEA2000-compatible brands, optimizing existing marine electronics investments.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862856679764,"sku":"A06079","price":34.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_585be39c-2db9-4109-92d9-3c9470792f89.jpg?v=1779215808"},{"product_id":"raymarine-stng-coude-devicenet-cable-adaptateur-1m","title":"STng angled – DeviceNet 1m","description":"\u003cp\u003e\n    The Raymarine STng to DeviceNet 1m right-angle adapter cable (part number A06080) is a marine navigation system interconnect component. It provides a link between a Raymarine SeaTalkng network and NMEA2000-compatible equipment, often referred to as DeviceNet in connector contexts. This solution is essential for integrating sensors, displays, or other NMEA2000 devices—whether original or third-party—into a SeaTalkng infrastructure. Its 1-meter length offers flexibility for direct connections over short distances, while the right-angle connector simplifies installation in confined spaces where a straight connector would be cumbersome.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Raymarine’s SeaTalkng system, introduced as an evolution of the SeaTalk and SeaTalk2 buses, is a proprietary interconnect bus based on the NMEA2000 protocol. The A06080 cable acts as a bridge between these two standards, enabling SeaTalkng products to communicate with NMEA2000 devices. While straight adapter cables exist for direct connections, the right-angle version of the A06080 is particularly suited to installations where space is constrained, such as behind dashboards or inside masts and consoles. It is part of Raymarine’s cabling accessory range, complementing blue backbone cables and white spur cables to ensure reliable data transmission across the entire network.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the A06080 cable is simplified by its color coding, with identifiable connectors and cables that reduce the risk of misconnections. It plugs directly into a free SeaTalkng port (typically on a backbone or compatible instrument) and into the DeviceNet port of the NMEA2000 device. This interoperability is critical for users looking to modernize their navigation system while retaining existing components or integrating devices from other manufacturers. The cable requires no specific software configuration, operating transparently once connected, much like other passive components in Raymarine’s SeaTalkng network. It contributes to overall system robustness by providing a durable, standards-compliant cabling solution.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862859465044,"sku":"A06080","price":35.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_3659cae0-a088-4a2b-b3de-748333f6c8eb.jpg?v=1779215830"},{"product_id":"raymarine-cable-stng-coude-droit-1m","title":"STng right-angle – STng straight 1m","description":"\u003cp\u003e\n    Designed for seamless integration into Raymarine SeaTalkng networks, this 1-meter A06081 spur cable is essential for connecting individual instruments to the main bus. The SeaTalkng system is distinguished by its proprietary bus architecture, comprising a backbone and spur cables to link products. This design simplifies installation with small-diameter connectors and intuitive color coding (blue for the backbone, white for spurs).\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and flexibility of the SeaTalkng network\u003c\/h3\u003e\n\u003cp\u003e\n    The RAYMARINE STng right-angle – STng straight 1m cable offers enhanced installation flexibility thanks to its dual connector configuration. One right-angle end (90 degrees) and one straight end optimize cable routing in confined spaces or behind panels, reducing strain on device ports. This cable is a key component for extending or modifying an existing SeaTalkng network, connecting instruments such as multifunction displays, sensors, or autopilots.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning in the Raymarine ecosystem\u003c\/h3\u003e\n\u003cp\u003e\n    Raymarine’s SeaTalkng system represents an evolution of the SeaTalk(1) and SeaTalk2 buses, designed to simplify networking of marine devices. It enables interconnection of specific Raymarine products, such as ST70 instruments, and can be connected to NMEA2000 products via adapter cables. This A06081 cable fits into this logic by providing a reliable, standardized connection for your navigation system components. Terminators are mandatory at both ends of the backbone to ensure correct data transmission.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862861168980,"sku":"A06081","price":35.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_f9f3f2e0-19af-43f5-a649-aa825a423d4c.jpg?v=1779216004"},{"product_id":"raymarine-adaptateur-seatalk-ng-devicenet-nmea2000","title":"SeaTalk NG (M) to DeviceNet (F) adapter","description":"\u003cp\u003e\n    The Raymarine A06082 adapter is a wiring component designed to ensure interoperability between Raymarine’s SeaTalk NG data bus systems and NMEA2000 (DeviceNet) networks. It enables the connection of devices with a male SeaTalk NG interface to NMEA2000 equipment or backbone via a female DeviceNet connection.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Raymarine’s SeaTalk NG system, introduced with products such as the ST70 instruments, uses a proprietary interconnect bus that is compatible with the NMEA2000 standard through specific adapter cables. The A06082 adapter implements this compatibility by providing a direct physical link. While SeaTalk NG is Raymarine’s communication standard, DeviceNet is a registered trademark of the Open DeviceNet Vendor Association Inc. and forms the physical basis of the NMEA2000 protocol. This adapter is therefore essential for mixed installations integrating Raymarine products and other NMEA2000 equipment.\n\u003c\/p\u003e\n\u003ch3\u003eSeaTalk NG system architecture\u003c\/h3\u003e\n\u003cp\u003e\n    A SeaTalk NG network consists of a main backbone terminated by two terminations, to which Raymarine products are connected via spur cables. SeaTalk NG cables and connectors are color-coded (blue for the backbone, white for spurs) to simplify installation and reduce the risk of incorrect connections. This adapter functions as a spur, allowing an NMEA2000 device to operate as a node on the SeaTalk NG network, or conversely, to connect a SeaTalk NG segment to an existing NMEA2000 network. It is important to note that network terminations are mandatory for correct operation of the SeaTalk NG system, as with any CAN bus network such as NMEA2000.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55862943777108,"sku":"A06082","price":22.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main-square_4c2ef803-0b96-4dbc-bd49-a489923fd66e.jpg?v=1779216513"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/accessoires.png?v=1774455782","url":"https:\/\/skysat.fr\/en\/collections\/accessories.oembed","provider":"Skysat","version":"1.0","type":"link"}