{"title":"AIS only","description":"\u003ch2\u003e Ais: seeing and being seen, safety first\u003c\/h2\u003e\n\n\n\u003cp\u003e AIS (Automatic Identification System) has become an indispensable tool for safety at sea. At Skysat, drawing on our experience in offshore racing, we know that the reliability and accuracy of AIS information are crucial. Here you will find a carefully curated selection of AIS transmitters, receivers, and transponders, as well as advice for optimal integration with your navigation system.\u003c\/p\u003e\n\n\n\u003ch2\u003e choosing your transmitter or receiver\u003c\/h2\u003e\n\n\n\u003cp\u003e The choice between a simple AIS receiver, transmitter, or transponder depends on your needs and navigation plans. A receiver allows you to view surrounding maritime traffic, while a transmitter makes you visible to other equipped vessels. A transponder combines both functions.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eAIS receiver:\u003c\/strong\u003e Ideal for small boats wishing to monitor maritime traffic.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAIS transmitter (Class B):\u003c\/strong\u003e Allows identification by other ships, with limited transmission power.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAIS Transponder (Class A):\u003c\/strong\u003e Mandatory for commercial vessels, offers superior range and transmission priority.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAIS antenna splitter:\u003c\/strong\u003e Allows sharing an existing VHF antenna between the VHF radio and the AIS.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e integration and compatibility\u003c\/h2\u003e\n\n\n\u003cp\u003e Integrating AIS with your navigation system is essential to fully utilize its capabilities. It's important to verify compatibility with your chartplotter, radar, and navigation software. The NMEA 2000 protocol simplifies integration, but proper configuration is often necessary.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eNMEA 0183 and NMEA 2000:\u003c\/strong\u003e Communication protocols for AIS data exchange.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eChartplotter compatibility:\u003c\/strong\u003e Check if your screen supports AIS data.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eDedicated GPS antennas:\u003c\/strong\u003e Recommended for optimal AIS positioning accuracy.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMMSI configuration:\u003c\/strong\u003e Essential for identifying your vessel.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cstrong\u003eSkysat's advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e AIS is a valuable safety tool, but it is no substitute for careful visual and radar monitoring. Make sure you understand the limitations of AIS technology and always navigate with caution.\u003c\/p\u003e","products":[{"product_id":"navico-nais-500-transpondeur-ais-classe-b-nmea2000","title":"NAIS-500 Class B AIS","description":"\u003cp\u003eThe \u003cstrong\u003eNavico\u003c\/strong\u003e \u003cstrong\u003eNAIS-500\u003c\/strong\u003e is an ultra-compact and lightweight Class B AIS transponder (260 g), designed to integrate seamlessly with modern navigation networks. Ideal for sailboats and cruising motorboats, it transmits and receives AIS data to prevent collisions. Unlike 5W SOTDMA (Class B+) models like the V3100 in the same range, this model transmits at 2W (33 dBm) using CSTDMA technology, positioning it as a proven standard solution, perfectly suited for classic coastal and offshore navigation while conserving battery power.\u003c\/p\u003e\n\u003ch3\u003eNMEA 2000 and Dual NMEA 0183 Connectivity\u003c\/h3\u003e\n\u003cp\u003eThis transponder offers maximum installation flexibility for B\u0026amp;G, Simrad, and Lowrance ecosystems. It features an NMEA 2000 port (LEN=1) for direct plug-and-play connection with multifunction displays. For refits or older systems, it includes two independent bidirectional NMEA 0183 ports: a high-speed port (38,400 baud) dedicated to chartplotters, and a low-speed port (4,800 baud) for other instruments. An internal multiplexing function automatically redirects data received on the low-speed port to the high-speed port. A mini-B USB port is also present for initial configuration via PC or Mac with MMSI number assignment.\u003c\/p\u003e\n\u003ch3\u003eRobust Design and Electrical Performance\u003c\/h3\u003e\n\u003cp\u003eDesigned to withstand the harshest marine environments, the NAIS-500's casing is IP67 waterproof and tolerates extreme temperatures from -15 °C to +55 °C. It incorporates a 50-channel internal GPS receiver (IEC 61108-1 compliant) ensuring fast and accurate positioning, requiring an external GPS antenna to be connected to its SMA connector. Its power supply accepts a very wide voltage range from 9.6 V to 31.2 V DC, making it natively compatible with 12V and 24V battery banks. Its power consumption is particularly optimized with an average of only 180 mA at 12V (2 A peak during transmission). A dedicated input on the harness also allows for wiring an external switch to easily activate silent mode (receive only, transmission off).\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723745747284,"sku":"000-13611-001","price":646.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_366ca238-425f-4251-9132-87b95bd00ef6.jpg?v=1772639560"},{"product_id":"simrad-ais-v3100-transpondeur-classe-b-sotdma-000-14380-001","title":"AIS Class B V3100 SOTDMA","description":"\u003cp\u003eThe SIMRAD V3100 is a Class B AIS transponder featuring SOTDMA (Self-Organising Time Division Multiple Access) technology. Designed for demanding navigators, whether professional or recreational, it offers a superior level of safety and performance compared to standard Class B AIS transponders using CSTDMA technology.\u003c\/p\u003e\n\n\u003ch3\u003eSOTDMA Technology: Enhanced Safety and Performance\u003c\/h3\u003e\n\u003cp\u003eUnlike CSTDMA (Carrier-Sense) technology, which waits for a free transmission slot, SOTDMA uses a self-organising access scheme, similar to that of Class A AIS systems. This ensures reliable transmission of your data, even in areas with very dense maritime traffic. With a 5W output power, more than double the 2W of CSTDMA devices, the V3100 provides a significantly longer detection and transmission range. Furthermore, the update frequency for dynamic data is considerably higher, reaching an interval of 5 seconds at speeds above 23 knots, compared to 30 seconds for a conventional CSTDMA AIS. This responsiveness is crucial for anticipating and avoiding collisions.\u003c\/p\u003e\n\n\u003ch3\u003eComplete Connectivity and Easy Integration\u003c\/h3\u003e\n\u003cp\u003eThe V3100 is designed for seamless integration into existing navigation systems. It features comprehensive connectivity, including an NMEA 2000 (Micro-C) port for plug-and-play installation, two NMEA 0183 ports for compatibility with older equipment, and a waterproof Mini-B USB port for configuration. Silent mode, which allows transmission to cease while continuing to receive AIS data, can be activated via an external switch or directly from a compatible Navico multifunction display over the NMEA 2000 network.\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design for the Marine Environment\u003c\/h3\u003e\n\u003cp\u003eBuilt to withstand the harshest marine conditions, the V3100's casing is IP67 certified, ensuring complete protection against dust and immersion. It operates within a temperature range of -15°C to +55°C and boasts low power consumption, typically less than 3W on average at 12V DC. The unit integrates its own 50-channel GPS receiver to provide accurate position data and connects to an external VHF antenna via a standard SO-239 connector.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":53723784872276,"sku":"000-14380-001","price":760.77,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_61703462-3ad3-4782-8784-1cabbbcd31a0.jpg?v=1774533881"},{"product_id":"raymarine-ais-700-classe-b-transpondeur-splitter-integre","title":"AIS 700 CLASS B with integrated antenna splitter","description":"\u003cp\u003eThe Raymarine AIS 700 transponder is a Class B+ transceiver utilizing SO-TDMA technology. Unlike traditional Class B AIS systems (CSTDMA) limited to a 2W transmission power, this model transmits at 5W. This architecture allows it to prioritize its place in the AIS network, ensuring increased range and faster position updates, a decisive advantage in busy shipping lanes where it approaches the responsiveness of Class A equipment.\u003c\/p\u003e\n\u003ch3\u003eSimplified Integration with VHF Splitter\u003c\/h3\u003e\n\u003cp\u003eThe main advantage of this transponder lies in its integrated VHF antenna splitter. It eliminates the need for a second dedicated AIS antenna, allowing the use of the boat's main VHF antenna for both voice and AIS data simultaneously, without signal degradation. Compared to competing solutions requiring separate boxes, the Raymarine AIS 700 centralizes installation, reducing wiring and clutter.\u003c\/p\u003e\n\u003ch3\u003eNMEA Connectivity and Marine Robustness\u003c\/h3\u003e\n\u003cp\u003eOn the network side, the device features NMEA 2000 and NMEA 0183 interfaces for direct integration with multifunction displays in the Axiom range or chartplotters from other brands. A USB port is also present for initial programming via a PC. Powered by 12 or 24VDC and benefiting from IPX6 and IPX7 waterproof certifications, this 2.5 kg module is designed to withstand the most demanding marine environments.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723788738900,"sku":"E70476","price":1045.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/ais-700-class-b-avec-splitter-dantenne-integre_e70476-2.png?v=1773874859"},{"product_id":"digital-yacht-ais-ait5000-transpondeur-classe-b-plus-wifi-nmea2000","title":"AIS-AIT5000 Class B+5W AIS Transponder with GPS Antenna","description":"\u003cp\u003eThe Digital Yacht AIS-AIT5000 transponder is a cutting-edge AIS Class B+ system based on SOTDMA technology. With a transmit power of 5W, it offers increased detection range and faster update rates than traditional Class B transponders limited to 2W (such as the AIT2000). This power ensures better visibility and priority allocation of transmission slots, a critical safety advantage in high-traffic navigation zones.\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated zero-loss VHF splitter\u003c\/h3\u003e\n\u003cp\u003eThe AIT5000’s major innovation is its certified \"zero-loss\" VHF antenna splitter. This internal component allows the ship’s main VHF antenna to be used simultaneously for VHF voice communications and for AIS data transmission\/reception. This design eliminates the need to install a second dedicated VHF antenna, reducing wiring complexity, windage, and installation costs without any degradation in signal attenuation.\u003c\/p\u003e\n\n\u003ch3\u003eMultiplexing and global network connectivity\u003c\/h3\u003e\n\u003cp\u003eDesigned as the heart of the onboard data network, the AIT5000 provides comprehensive connectivity. It includes an NMEA 2000 port (N2Net) for direct connection to modern multifunction displays (Garmin, B\u0026G, Raymarine). It also features two NMEA 0183 inputs and two outputs, configurable at 38400 and 4800 baud. The device acts as a multiplexer: it merges incoming NMEA 0183 instrument data with its own AIS and GPS frames, redistributing them via its high-speed NMEA 0183 output, USB port, and Wi-Fi interface. The bidirectional Wi-Fi module (TCP\/UDP, IP address 192.168.1.1) enables telemetry broadcasting to tablets or smartphones, while providing an integrated web interface for initial configuration (MMSI entry), making PC software optional. The unit is compatible with 12V and 24V DC electrical systems.","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":53723821080916,"sku":"ZDIGAIT5000","price":896.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_79ab7635-01db-4ce1-b874-2ef870d6169d.jpg?v=1776784975"},{"product_id":"furuno-ais-fa70-class-b-plus-sotdma-transpondeur","title":"AIS FA70 Class B+","description":"\u003cp\u003eThe FURUNO FA-70 AIS transponder is a Class B+ transceiver that significantly improves safety at sea through the use of SOTDMA (Self-Organising Time Division Multiple Access) technology. Unlike standard Class B transponders that operate in CS-TDMA with a 2W power output, the FA-70 offers selectable output power of 5W or 1W. This higher power, combined with the SOTDMA algorithm, ensures more frequent and reliable transmission of your position, even in high-traffic maritime zones, by reserving a transmission slot to avoid conflicts.\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced integration and connectivity\u003c\/h3\u003e\n\u003cp\u003eThe FA-70 stands out with its integrated VHF antenna splitter, allowing a single VHF antenna to be shared between your radio and the AIS without performance loss. This feature greatly simplifies installation and reduces costs. Its connectivity is comprehensive, featuring an NMEA2000 port, two NMEA0183 input ports, two NMEA0183 output ports, and a micro-USB port for PC configuration. It thus integrates seamlessly with most multifunction displays and navigation software on the market. The internal 12-channel GPS receiver (SBAS-compatible) ensures rapid and precise position acquisition (13 m 2drms).\u003c\/p\u003e\n\n\u003ch3\u003eRobust design and performance\u003c\/h3\u003e\n\u003cp\u003eDesigned for the marine environment, the FA-70 transponder housing is IP55-certified, protecting it from water spray. It operates on a 12\/24 VDC power supply with optimized consumption (1.8–0.9 A in transmission and 0.3–0.2 A in reception). Within the FURUNO range, it represents the logical evolution of the FA-40 receiver alone, offering full transmission capabilities. It also features a switchable silent mode, allowing you to stop transmission of your own position while continuing to receive surrounding targets.\u003c\/p\u003e","brand":"FURUNO","offers":[{"title":"Default Title","offer_id":53723827929428,"sku":"IMD031500AA","price":983.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/ais-fa70-class-b_imd031500aa-2.jpg?v=1776784244"},{"product_id":"garmin-transpondeur-ais-800-emetteur-recepteur","title":"AIS 800 transponder transmitter-receiver","description":"\u003cp\u003eThe Garmin \u003cstrong\u003eAIS 800 transponder\u003c\/strong\u003e is a black box AIS transceiver. It transmits and receives AIS data for improved vessel detection.\u003c\/p\u003e\u003ch3\u003eIntegration flexibility\u003c\/h3\u003e\u003cp\u003eIts dual NMEA 2000 and NMEA 0183 connectivity is its main advantage, allowing installation on both modern and older vessels without converters. \u003cstrong\u003eThis transponder\u003c\/strong\u003e provides a robust solution for adding AIS safety while maintaining compatibility with existing electronics.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53723842576724,"sku":"010-02087-00","price":945.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_8cf0f882-310f-4204-9005-303653eb3470.png?v=1779186361"},{"product_id":"icom-ma-510tr-transpondeur-ais-classe-b-nmea2000","title":"AIS Class B Transponder","description":"\u003cp\u003eThe ICOM MA-510TR Class B AIS transponder is a standalone solution with a dedicated screen for monitoring maritime traffic. Unlike \"black box\" AIS modules (such as the Garmin AIS 800 or Raymarine AIS700) that require an external chartplotter, this model allows direct reading of surrounding targets. It transmits at a power of 2 W on frequencies from 161.500 to 162.025 MHz, ensuring your visibility to commercial and recreational vessels equipped with an AIS receiver.\u003c\/p\u003e\n\u003ch3\u003eNMEA Connectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003eDesigned for easy integration with onboard electronics, the MA-510TR features NMEA 2000 and NMEA 0183 network interfaces. This dual compatibility allows for multiplexing AIS and GPS data to a multifunction chartplotter, radar, or PC navigation software via its USB port (mini-B type). The unit is powered by 12 V or 24 V DC (9.6 to 31.2 V tolerance) to adapt to all marine electrical systems, with a limited transmission power consumption of 1.5 A (at 12 V).\u003c\/p\u003e\n\u003ch3\u003e72-Channel GPS Receiver and Safety Features\u003c\/h3\u003e\n\u003cp\u003eThis transponder utilizes an external 72-channel GPS antenna (frequency 1575.42 MHz) supplied with a 10-meter cable, compatible with WAAS, EGNOS, MSAS, and GAGAN differential corrections for maximum positioning accuracy. The interface offers configurable anti-collision alarms (CPA\/TCPA), a guard zone alarm, and advanced target management (friend list, dangerous targets, waypoints). Its compact housing (166.2 x 110.2 x 92.5 mm) is designed to withstand marine environments with an operating temperature range of -20 °C to +60 °C.\u003c\/p\u003e","brand":"ICOM","offers":[{"title":"Default Title","offer_id":53723851456852,"sku":"MA-510TR","price":877.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/transpondeur-ais-classe-b_ma-510tr-2.jpg?v=1773915000"},{"product_id":"garmin-vhf-215i-ais-radio-marine","title":"VHF 215i AIS","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin VHF 215i AIS\u003c\/strong\u003e is a fixed marine VHF radio designed for communication and safety at sea, integrating an AIS receiver for improved situational awareness. Positioned as an essential communication solution, it stands out for its ability to receive and display data from nearby AIS-equipped vessels, complementing the traditional functions of a VHF radio. Unlike VHF models without AIS or dedicated standalone AIS systems, the 215i AIS offers a compact and integrated solution.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    This Garmin model ensures reliable communication on maritime frequencies. The integrated AIS receiver allows users to view AIS target information directly on a compatible Garmin display (not included), enhancing safety by avoiding collisions. The VHF 215i AIS complies with international regulations, including European Directive 2014\/53\/EU, FCC requirements, and Innovation, Science and Economic Development Canada standards. Its use requires a marine radio license and a qualified operator, in accordance with government regulations.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for flush-mount installation, the VHF 215i AIS comes with a precise mounting template. Cutout dimensions for flush installation are 168 mm in width by 72 mm in height, with 3.2 mm (1\/8 in) mounting holes and a 9.5 mm (3\/8 in) cable passage. The product design includes precautions for managing radio frequency (RF) signals and an internal antenna for low-level transmission and reception. Durability is ensured by a robust design suited to the marine environment, though it is reminded not to use the device with a damaged antenna to avoid minor burn risks.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860303298900,"sku":"010-02098-01","price":592.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_baab7348-9e7f-45fb-9f17-5039a430796e.jpg?v=1779191411"},{"product_id":"garmin-cortex-m1-transpondeur-smartais-surveillance-distante","title":"Cortex® M1 - SmartAIS transponder with remote monitoring","description":"\u003cp\u003e\n    Designed for safety and connectivity at sea, the \u003cstrong\u003eGarmin Cortex M1\u003c\/strong\u003e transponder is a SmartAIS SOTDMA Class B hub with remote monitoring features. It combines a 10 Hz multi-constellation GNSS receiver (GPS, GLONASS, BeiDou, Galileo) with a 9-axis heading sensor for precise positioning and threat detection. Unlike passive AIS transponders that only transmit and receive data, the Cortex M1 uses SmartAIS logic to anticipate collision risks, manage anchor watch, and detect man-overboard situations.\n\u003c\/p\u003e\n\n\u003ch3\u003eProactive safety with SmartAIS\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eCortex M1\u003c\/strong\u003e SmartAIS system continuously calculates collision risks by cross-referencing your vessel's GPS data with AIS information received from other boats. It emits directional audio and voice alerts, such as \"collision alert, starboard bow,\" enabling rapid, targeted responses compared to generic alerts from conventional AIS systems. This differs from classic AIS systems that only display targets without predictive trajectory analysis. The \"Anchor Watch\" function uses the actual anchor position from the bow and data from the built-in heading sensor to track vessel movement, triggering an alarm if the anchor drags or if significant changes in wind speed, direction, or water depth are detected. This anchor watch capability is more advanced than a simple geofence alarm.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and extended monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin Cortex M1\u003c\/strong\u003e serves as the core of a versatile communication and monitoring system. While the M1 is \"VHF-ready,\" it requires the addition of Cortex H1 (wired) or H1P (portable) handsets, sold separately, to enable full VHF radio functionality and Digital Selective Calling (DSC). It includes a lossless AIS\/VHF splitter for sharing a single existing VHF antenna with another VHF radio without signal degradation. Equipped with a cellular modem and Wi-Fi connectivity (2.4 GHz, 802.11b\/g\/n), it allows onboard monitoring of boat data (position, battery voltage, heading, barometric pressure) via the Cortex Onboard app. Remote monitoring, real-time alerts, and control of onboard devices (air conditioning, lighting) are accessible via the Cortex Monitor app with a premium subscription. It features five inputs for external sensors (digital 0-24V or analog 0-17V) and acts as an NMEA 2000\/0183 gateway, ensuring broad compatibility with most chartplotters and multifunction displays. The thermal polymer housing meets IPX7 standards, offering heat, corrosion resistance, and submersibility up to 1 meter for 30 minutes, allowing installation in various marine environments. Its nominal 700 mA consumption at 12V is optimized for continuous monitoring.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55863257694548,"sku":"010-02815-20","price":1293.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_b431f4fd-2cad-47e1-87f9-271f4e5f56f7.jpg?v=1779219278"},{"product_id":"lowrance-link-9-radio-vhf-marine-asn-ais-rx","title":"LINK-9 Marine VHF Radio with ASN and AIS-RX","description":"\u003cp\u003e\n    Designed for safety and communication at sea, the \u003cstrong\u003eLowrance Link-9\u003c\/strong\u003e marine VHF radio with ASN and AIS-RX is a fixed solution integrating essential functions. It represents an evolution of the Link-8 model, offering advanced communication and monitoring capabilities for recreational boaters and light commercial vessels. This Class D fixed VHF transceiver features selectable transmit power of 25 W or 1 W, allowing adaptation to short- or long-range communication needs.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated AIS Security and Monitoring\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLink-9\u003c\/strong\u003e integrates a dual-channel AIS receiver capable of monitoring up to 150 AIS targets simultaneously. This feature enables the display of information from nearby AIS-equipped vessels, such as status, destination, ETA, ship name, type, call sign, MMSI number, and position, contributing to collision avoidance. This data can be shown on the device’s 256x160-pixel monochrome FSTN LCD screen or overlaid on a compatible multifunction display via NMEA 2000 or NMEA 0183 networks.\n\u003c\/p\u003e\n\n\u003ch3\u003eGPS Location and Network Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    With its integrated GPS receiver, the \u003cstrong\u003eLowrance Link-9\u003c\/strong\u003e ensures accurate and reliable positioning. It offers four methods to obtain a GPS fix: an integrated antenna, an SMA connector for an optional external GPS antenna (GPS-500), an NMEA 0183 input from a chartplotter, and an NMEA 2000 connection for a network antenna. This versatility ensures position data availability for ASN distress calls. The radio integrates easily with Lowrance navigation systems via its NMEA 2000 and NMEA 0183 ports, supporting specific PGNs for smooth data communication. It is compatible with 12 V DC power, with overvoltage protection above 15.8 V and a low-battery alert at 10.5 V DC.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Features and Flexible Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLink-9\u003c\/strong\u003e is equipped with a removable 6-button microphone with an integrated speaker, which can be connected to the front or rear of the radio, with an optional extension cable for remote installation. Its mechanical design allows simplified front mounting with easily removable top and bottom frames, blending seamlessly with the aesthetics of Lowrance multifunction displays. Additional functions include a dedicated MOB button to instantly mark a man-overboard position and provide return instructions, as well as the Track Your Buddy™ feature to track up to five contacts via DSC position requests. The radio also features a navigation mode displaying speed and heading, a public address\/horn output with listen-in function, and supports Dual Watch, Tri Watch, and All Scan scanning modes. The unit is IPx7 certified for water resistance and operates within a temperature range of -20 °C to +55 °C.\n\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":55920745611604,"sku":"000-14472-001","price":562.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lowrance-link-9-radio-vhf-marine-avec-asn-et-ais-rx_000-14472-001-01.webp?v=1779462618"},{"product_id":"garmin-signal-vhf-400-fixe-ais-sotdma-marine","title":"Signal™ VHF 400 - Fixed VHF with AIS transponder","description":"\u003cp\u003e\n    Designed for communication and situational awareness, the \u003cstrong\u003eGarmin Signal™ VHF 400\u003c\/strong\u003e is a fixed marine VHF radio integrating an SOTDMA Class B AIS transponder. It features a 3.5-inch full-touch color display with edge-to-edge glass, optimizing space at the helm.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Communication and Safety\u003c\/h3\u003e\n\u003cp\u003e\n    The VHF 400 offers SOTDMA Class B AIS transmit and receive capabilities, displaying range, heading, speed, and crossing status of other AIS-equipped vessels for improved environmental awareness. The system also integrates Digital Selective Calling (DSC) Class D, enabling rapid distress signal transmission and contact establishment with other vessels via the AIS screen. The included hand microphone features a built-in 5 W RMS (95 dBA at 0.5 meter) speaker, ensuring clear audio with adaptive noise reduction via machine-learning algorithms that filter wind, waves, and engine noise.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Innovative Features\u003c\/h3\u003e\n\u003cp\u003e\n    With its integrated GPS receiver, the \u003cstrong\u003eGarmin Signal™ VHF 400\u003c\/strong\u003e provides accurate position data without requiring an external GPS antenna, though external connection is possible for installations with weak reception. The unit is compatible with 12 V and 24 V electrical systems and requires only a single VHF antenna for VHF, DSC, and AIS functions, simplifying installation. Its 25-watt transmit power ensures maximum range. The VHF audio playback function automatically records up to three minutes of transmissions across three channels simultaneously, while advanced monitoring modes allow continuous monitoring of Channel 16 and up to six pre-set channels. Integrated Wi-Fi connectivity enables software updates via the ActiveCaptain app.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The VHF 400 integrates with Garmin marine networks via NMEA 2000, Garmin Marine Network 1.0, and Garmin BlueNet, offering centralized management from a compatible Garmin chartplotter. It supports connection of an external speaker and hailer with listening function. The built-in intercom enables communication between the main unit and remote stations such as the Garmin Signal RM 100. Its robust design meets IPX7 waterproofing standards. For upgrades, a retrofit kit (sold separately) allows installation in existing cutouts of Garmin VHF 210\/215 radios and, with modification, VHF 110\/115 units.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008700002644,"sku":"010-02951-00","price":1071.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_e6bbdc3b-86b4-46c5-804f-949e569900c8.jpg?v=1780432305"},{"product_id":"garmin-signal-vhf-220-fixe-recepteur-ais","title":"Signal™ VHF 220 - Fixed VHF with AIS receiver","description":"\u003cp\u003e\n    Designed for clear marine communication and improved situational awareness, the Garmin Signal™ VHF 220 is a fixed marine radio with an integrated AIS receiver. This model features a 3.5-inch edge-to-edge color touchscreen, providing an intuitive interface for navigation and call management.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced communication and safety\u003c\/h3\u003e\n\u003cp\u003e\n    The Signal™ VHF 220 is a Class D DSC radio with up to 25 W transmit power for extended range. For optimized audio clarity, it integrates adaptive noise reduction using machine learning algorithms, eliminating interference from wind, waves, and engine noise. The squelch is automatically managed, with an option for manual adjustment. A VHF audio replay function allows you to replay missed messages on any channel for up to three minutes, with the ability to record three channels simultaneously. Its advanced standby modes continuously monitor all VHF channels in the background, including Channel 16 and preset favorite channels.\n\u003c\/p\u003e\n\u003ch3\u003eAIS receiver and network integration\u003c\/h3\u003e\n\u003cp\u003e\n    The integrated SOTDMA AIS Class B receiver provides essential information on nearby AIS-equipped vessels, including range, heading, speed, and crossing situation, enabling better decision-making and intuitive initiation of DSC contacts directly from the AIS screen. It is important to note that the VHF 220 is an AIS receiver only, unlike the Garmin Signal VHF 400, which includes a Class B AIS transponder. The device integrates a GPS for accurate position reports and connects to the NMEA 2000 network, ensuring seamless integration with Garmin chartplotters and sharing GPS, DSC, and AIS data. Garmin BlueNet™ Network connectivity enables linking with compatible Garmin BlueNet chartplotters and Garmin Signal RM 100 remote stations, offering multi-station control and intercom functions. The integrated Wi-Fi® facilitates software updates via the ActiveCaptain® app and initial MMSI number configuration.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    With a compact and rugged design, the Garmin Signal™ VHF 220 is built to withstand harsh marine environments, as evidenced by its IPX7 waterproof rating. It is compatible with 12V and 24V electrical systems. Installation requires an external VHF antenna (not included). For upgrades, a retrofit kit is available separately, allowing replacement of Garmin VHF 210\/215 and VHF 110\/115 radios. A bracket mounting kit is also offered as an option for specific installations. The supplied hand-microphone includes a 5 W RMS speaker capable of 95 dBA at 0.5 meters and supports connection to an external speaker and a horn compatible with listening function.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008700166484,"sku":"010-02951-01","price":691.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_02453471-0d49-49ef-92b7-d465c62a8a08.jpg?v=1780432332"},{"product_id":"furuno-fa70-ais-emetteur-recepteur-black-box-classe-b-sotdma-splitter-vhf","title":"FA70 — AIS Transceiver Black Box Class B SOTDMA 5W\/1W, integrated VHF splitter, GPS antenna","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO FA70\u003c\/strong\u003e is an AIS (Automatic Identification System) Class B+ SOTDMA transponder designed for safety and visibility at sea. This \"black box\" system integrates with existing multifunction displays on board, providing a discreet and high-performance solution for monitoring maritime traffic. The FA70 exchanges essential navigation data (ship name, call sign, position, heading, speed) with other AIS-equipped vessels and coastal stations, improving situational awareness.\n\u003c\/p\u003e\n\n\u003ch3\u003eSOTDMA technology and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The FA70 uses SOTDMA (Self-Organizing Time Division Multiple Access) technology, which guarantees a dedicated AIS transmission time slot, even in high-traffic areas. This feature ensures increased visibility and reliable data transmission compared to CS-TDMA systems. With selectable transmit power of 5 W or 1 W in SOTDMA (vs. 2 W for standard Class B), the FA70 offers extended detection range. It can receive up to 4,500 AIS reports per minute across two channels, processing data from both Class A and Class B AIS transponders.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified integration and installation\u003c\/h3\u003e\n\u003cp\u003e\n    This transponder includes an integrated VHF splitter, eliminating the need for a dedicated VHF antenna for AIS. It shares the vessel’s existing VHF antenna, simplifying installation and reducing clutter on the mast. The FA70 features an internal high-precision GPS receiver with WAAS (DGPS) capability and 12-channel reception, ensuring accurate positioning with a position accuracy of 13 meters (2 drms, HDOP \u003c= 4). Connectivity is provided via NMEA2000 ports (1 input, 1 output), NMEA0183 ports (2 inputs, 2 outputs), and a USB port (micro B), enabling flexible integration with various AIS-compatible radars and chartplotters, including Furuno NavNet systems. Silent mode can be activated via an external switch.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The transponder housing measures 177(L) x 55(H) x 158(D) mm and weighs 0.52 kg, facilitating installation in confined spaces. The GPS antenna unit has an IP56 waterproof rating, while other units are rated IP55, ensuring reliable operation in marine environments. Power is compatible with 12–24 VDC systems.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089354699092,"sku":"IMD031500AB","price":1032.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-fa70-ais-emetteurrecepteur-black-box-classe-b-sotdma-5w1w-splitter-vhf-integre-antenne-gps_im-1.jpg?v=1781256556"},{"product_id":"ocean-signal-m200-balise-mob-ais-dsc-121mhz","title":"M200 — PROFESSIONAL AIS MOB BEACON Class M and 121.5 MHz - NON ATEX","description":"\u003cp\u003e\n    The Ocean Signal \u003cstrong\u003eM200\u003c\/strong\u003e professional MOB beacon is a marine survivor locating device (MSLD) compliant with AIS Class M regulations (ECC\/DEC\/(22)02). Designed for marine safety, it integrates multiple alert methods to optimize the speed of rescue operations for recreational boaters and professionals.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated location technologies\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eM200\u003c\/strong\u003e transmits distress signals via Automatic Identification System (AIS), Digital Selective Calling (DSC), and a 121.5 MHz homing signal. Upon activation, it broadcasts an initial individual distress message in under 15 seconds, followed by 8 AIS messages per minute. Each AIS message sequence includes precise GNSS coordinates obtained via its multi-constellation receiver (GPS and Galileo).\n\u003c\/p\u003e\n\u003cp\u003e\n    A built-in VHF DSC transceiver can send messages such as individual distress relay calls, group calls, or all-ships distress alerts, depending on national regulations. An integrated DSC receiver stops continuous DSC transmissions once a distress signal has been acknowledged. DSC transmission power is 1 Watt (EIRP) on a 156.525 MHz frequency. The 121.5 MHz homing frequency facilitates short-range tracking.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and additional features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eM200\u003c\/strong\u003e features dual infrared (IR) and white strobe lights for enhanced visibility, with IR aiding detection by thermal cameras. It can be activated automatically when integrated with an inflatable lifejacket or manually. It offers an operational autonomy of over 12 hours and uses a lithium battery (LiMnO2) with a 5-year lifespan, which must be replaced by an Ocean Signal authorized service center.\n\u003c\/p\u003e\n\u003cp\u003e\n    Measuring 115 mm (H) x 46 mm (L) x 27 mm (D) and weighing 119 g, the \u003cstrong\u003eM200\u003c\/strong\u003e is compact. It is waterproof to 10 meters and operates within a temperature range of -20°C to +55°C. Near Field Communication (NFC) connectivity allows users to access the Ocean Signal mobile app to view usage data, battery status, self-test history, and enter the vessel’s MMSI without draining the beacon’s internal battery.\n\u003c\/p\u003e","brand":"Ocean Signal","offers":[{"title":"Default Title","offer_id":56090858455380,"sku":"OS-745S-05489","price":530.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/ocean-signal-m200-mob-professionnelle-ais-class-m-et-121mhz-non-atex_os-745s-05489-1.png?v=1781266106"},{"product_id":"furuno-fa40-recepteur-ais-bi-frequence-black-box-nmea2000","title":"FA40 — AIS bi-frequency receiver Black Box, no VHF whip, NMEA2000 and NMEA0183 interface. Cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO FA40\u003c\/strong\u003e is a bi-frequency AIS receiver (Black Box type), designed to enhance navigation safety by providing essential information about nearby vessels equipped with AIS. This compact and lightweight unit simplifies integration with various marine navigation systems.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and features\u003c\/h3\u003e\n\u003cp\u003e\n    The FA40 operates within a frequency range of 156.025 MHz to 162.025 MHz, with a 25 kHz channel spacing. It uses a dual superheterodyne reception method and can process up to 2,250 reports per minute on one channel, or 4,500 reports per minute on two channels. Its sensitivity is -107 dBm or better (PER 20% or less). It receives real-time AIS Class A and Class B data, improving situational awareness for collision avoidance, even in low visibility or high-traffic areas.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for flexible integration, the FA40 is compatible with most AIS radars and chartplotters, including Furuno NavNet systems. It features an NMEA2000 port and two NMEA0183 serial ports (IEC61162-1, 4800\/38400 bps), plus a USB 2.0 port for maintenance and configuration. Power supply is 12–24 VDC (9.6–31.2 V), with a current draw of 0.3–0.2 A. The AIS receiver unit is waterproof to IP55 standards.\n\u003c\/p\u003e\n\u003ch3\u003eData and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The FA40 displays detailed information such as vessel name, call sign, position, course over ground (COG), speed over ground (SOG), rate of turn (ROT), heading, navigation status, MMSI number, IMO number, vessel type, cargo, length, draft, destination, and estimated time of arrival. Installation is straightforward thanks to compatibility with most VHF antennas. A signal splitter is available as an option to share the VHF antenna with a radio. Initial configuration can be performed via the NMEA2000 network, including with Furuno NavNet TZtouch2\/TZtouch3 displays.","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56098305835348,"sku":"IMD040100AA","price":732.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-fa40-ais-recepteur-bi-frequence-black-box-sans-fouet-vhf-interface-nmea2000-et-nmea0183-cabl_-1.jpg?v=1781305943"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/ais-seuls.png?v=1774455802","url":"https:\/\/skysat.fr\/en\/collections\/ais-only.oembed","provider":"Skysat","version":"1.0","type":"link"}