{"title":"Amplifiers","description":"\u003ch2\u003eMarine amplifiers: clean power and dynamic headroom\u003c\/h2\u003e\n\u003cp\u003eA marine amplifier must deliver stable power despite voltage variations, heat, and vibrations. It directly determines the available sound level underway and the handling of low frequencies.\u003c\/p\u003e\n\u003cp\u003eKey comparison points are RMS power per channel, supported impedance, amplification class, bridging options, power draw, and moisture protection.\u003c\/p\u003e\n\u003ch3\u003eSkysat advice\u003c\/h3\u003e\n\u003cp\u003eDo not size the amp based solely on peak power. Match the amplifier’s RMS power to that of the speakers, allow headroom on the power supply side, and ideally separate subwoofers and full-range speakers onto dedicated channels.\u003c\/p\u003e","products":[{"product_id":"fusion-ampli-marin-signature-6-canaux-24v","title":"Signature range marine amplifier, 6 channels, 24V","description":"\u003cp\u003e\n    Designed for 24V marine audio systems, the Fusion SG-24DA61500 amplifier from the Signature range is a high-performance multichannel sound solution. It delivers a peak power of 1500W and an RMS power of 100W x 6 channels at 4 Ohms (at 28.8 Vdc) or 140W x 6 channels at 2 Ohms (at 28.8 Vdc). In bridged mode, it reaches 280W x 3 at 4 Ohms, offering flexibility to power a variety of speakers and subwoofers.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and efficiency\u003c\/h3\u003e\n\u003cp\u003e\n    The Class D design of this amplifier ensures energy efficiency, reducing current consumption (less than 1.25 A at idle, 35 A max) and heat dissipation. Featuring conformal-coated printed circuits, a rigid heat sink made of die-cast aluminum alloy, and a stainless steel finish, the SG-24DA61500 is built to Fusion’s True-Marine standards. These features ensure resistance to marine environments, including exposure to salt spray, temperature variations, vibrations, and UV, though it requires installation in a dry location.\n\u003c\/p\u003e\n\n\u003ch3\u003eFlexibility and integration\u003c\/h3\u003e\n\u003cp\u003e\n    With an extended frequency response from 10 Hz to 40 kHz, the amplifier integrates adjustable high-pass, low-pass, and full-band filters (from 32 Hz to 320 Hz with a 12 dB\/octave slope). It also offers adjustable bass boost (0 to 9 dB) specifically for zone 3, enabling precise sound customization. Its operating voltage of 21.6 to 32 Vdc is specifically designed for ships equipped with 24V electrical systems, setting it apart from the more common 12V amplifiers. This specificity makes it the preferred choice for demanding audio installations on larger boats, where stability and power are paramount.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723835269460,"sku":"010-02556-00","price":554.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d9439d39-3436-4114-856a-c16ff32bd8cd.jpg?v=1780432260"},{"product_id":"fusion-amplificateur-signature-8-canaux-2000w-marin","title":"Signature Series 8-Channel 2000W Marine Amplifiers","description":"\u003cp\u003e\n    Designed for demanding marine audio systems, the Fusion Signature Series 8-channel 2000W marine amplifier (model SG-DA82000) provides a high-power audio solution for complex installations. This Class D amplifier delivers 2000 W of peak power, with a nominal RMS power of 100 W per channel at 4 Ohm or 140 W per channel at 2 Ohm across its eight channels. It can also be bridge-mode configured to deliver 280 W RMS on four channels at 4 Ohm, offering flexibility to power a variety of speakers and subwoofers.\n\u003c\/p\u003e\n\n\u003ch3\u003eTrue-Marine™ design and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The Fusion Signature Series amplifier features True-Marine™ design, ensuring protection against harsh marine environments. Its printed circuits are coated with a conformal coating for enhanced resistance to elements. The die-cast aluminum chassis acts as a heat sink, with optimized fin layout to maximize surface area and improve thermal dissipation, contributing to system reliability. It weighs 5.2 kg and measures 420 mm x 210 mm x 57 mm.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a frequency response of 10 Hz to 40 kHz (-3 dB at 4 Ohm), this amplifier can reproduce an extended sound spectrum. It integrates adjustable high-pass and low-pass filters from 32 Hz to 320 Hz with a 12 dB\/octave slope, as well as adjustable Bass Boost from 0 to 9 dB for zones 2 and 4. These options allow precise customization of audio output for different types of speakers and subwoofers. The required power supply is 10.8 to 16 Vdc, with a maximum current draw of 100 A. The compass safe distance is 50 cm.\n\u003c\/p\u003e\n\u003cp\u003e\n    Positioned as a high-performance solution in Fusion’s Signature range, this amplifier stands out from basic models by its ability to handle complex multi-zone audio systems with high RMS power per channel. Compared to Class AB amplifiers, its Class D technology offers superior energy efficiency, reducing current draw and heat generation—a significant advantage for marine installations where power management is critical.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723835466068,"sku":"010-02162-00","price":686.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_7f02b86a-8ba4-436c-b6ed-fbda5eeaa249.jpg?v=1780432200"},{"product_id":"fusion-amplificateur-marin-ms-ap12000-monobloc-subwoofer","title":"Marine amplifier MS-AP12000","description":"\u003cp\u003e\n    The Fusion MS-AP12000 marine monoblock amplifier is designed for subwoofer-dedicated audio performance, integrating with the Fusion Apollo marine entertainment system. This Class D amplifier is specifically engineered to operate optimally with compatible Fusion DSP stereo systems and speakers, ensuring an optimized sound experience.\n\u003c\/p\u003e\n\u003ch3\u003eAudio Performance and System Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-AP12000 delivers a maximum output power of 2000 watts. It provides 650 watts RMS x 1 channel at 4 ohms and 1100 watts RMS x 1 channel at 2 ohms, compliant with CEA-2006 standards. Its Class D design ensures high energy efficiency, reducing the vessel’s battery consumption. Exclusive integration with compatible Fusion marine DSP stereo systems (such as Apollo RA770, RA670, WB670, and MS-RA210) and Fusion speakers\/subwoofers enables automatic audio parameter optimization via the Easy Tune function, managed by the Fusion-Link™ app.\n\u003c\/p\u003e\n\u003ch3\u003eMarine Design and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring Fusion True-Marine™ design, this amplifier is tested to withstand harsh marine environments, including salt spray, temperature variations, vibrations, and UV exposure. Its IPX2 rating indicates resistance to water spray. The printed circuit board (PCB) is coated with a conformal coating for enhanced protection against marine elements. The thermo-lacquered aluminum housing provides a durable finish. An ignition protection system is integrated, with a 125 A electronic fuse that protects against overcurrent, undervoltage, short circuits, and overheating without requiring replacement. An LED indicator provides visual feedback on electrical currents, short circuits, and temperature for quick diagnostics.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Installation is simplified with an included mounting bracket for quick attachment\/detachment or surface mounting with countersunk screws. The unit must be installed in a dry, well-ventilated location, protected from extreme temperatures, fuel, and vapors. Physical dimensions (without bracket) are 235 x 180 x 45 mm (9.25\" x 7.06\" x 1.75\") with a weight of 2.2 kg (4.85 lb). It operates on a voltage range of 10.8 V to 16 V DC and within a temperature range of 0° to 50° C (32° to 122° F). Standby power consumption is less than 5 mA at 14.4 V, with a maximum consumption of 87 A.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073418670420,"sku":"010-02284-15","price":509.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_17af6264-cc41-4098-892a-fcfef9b70309.jpg?v=1781108824"},{"product_id":"fusion-amplificateur-marin-ms-ap41200-4-canaux-classe-d","title":"Marine amplifier Fusion MS-AP41200","description":"\u003cp\u003e\n    The \u003cstrong\u003eFusion MS-AP41200 marine amplifier\u003c\/strong\u003e is designed for marine audio systems requiring power and sound fidelity. This 4-channel amplifier delivers 150 watts RMS per channel at 4 ohms or 290 watts RMS per channel at 2 ohms (at 14.4V and \u0026lt;1% THD+N). It can be bridged into a 2-channel configuration to provide up to 580 watts RMS per channel at 4 ohms, particularly for powering a subwoofer. Its peak power reaches 1200 watts.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring a Class-D architecture, the MS-AP41200 offers high efficiency, minimizing current draw (less than 5 mA in standby, less than 1.15 A with no audio, up to 53 A max in operation) and extending battery life. It operates on a 10.8 to 16 V DC supply and includes an 85 A electronic fuse, eliminating the need for replacement. Input impedance is 22k ohms, with an input sensitivity of 1.3 V RMS.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and smart features\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier is specifically designed for use with compatible Fusion DSP marine audio systems, such as Apollo RA670, RA770, WB670, and MS-RA210 stereos, as well as Fusion marine speakers. It is not compatible with third-party audio systems. The \"Easy Tune\" feature enables automatic audio parameter adjustment via the Fusion-Link™ app for optimized sound quality without manual intervention. The absence of built-in manual controls centralizes all settings through the app. LED indicators provide visual feedback on electrical currents, short circuits, and temperature, simplifying troubleshooting.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine robustness and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-AP41200 is built with True-Marine™ design, ensuring resistance to harsh marine environments. Its chassis is rated IPX2, providing protection against water droplets. The PCB features conformal coating for enhanced protection against marine elements. The powder-coated aluminum finish is tested against salt spray, temperature variations, vibrations, and UV exposure. Integrated protection circuits prevent overheating, reverse polarity, over\/under-voltage, and short circuits, with ignition protection (SAE J1171). It operates within a temperature range of 0° to 50° C. Dimensions are 235 x 180 x 45 mm (without bracket) and 235 x 180 x 50 mm (with bracket), weighing 2.2 kg. The safe distance for compasses is 75 cm. Installation is simplified with an included mounting bracket and proprietary cable connectors. The product is covered by a 3-year limited warranty.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073421029716,"sku":"010-02284-45","price":499.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_fc3d7532-577e-4251-86e3-153ef6044ca9.jpg?v=1781108844"},{"product_id":"fusion-amplificateur-marin-ms-ap61800-6-canaux-1800w","title":"Marine amplifier MS-AP61800","description":"\u003cp\u003e\n    Designed for Fusion marine audio systems compatible with DSP, the \u003cstrong\u003eFusion MS-AP61800\u003c\/strong\u003e marine amplifier is a dedicated amplification solution. It is specifically optimized for use with Fusion marine stereo players featuring DSP technology, such as the Apollo RA770, RA670, WB670, and MS-RA210 models, as well as with Fusion speakers.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and efficiency\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFusion MS-AP61800\u003c\/strong\u003e is a 6-channel amplifier with a peak power of 1800 watts. It delivers 150 watts RMS per channel at 4 ohms and 290 watts RMS per channel at 2 ohms. In bridged mode, it reaches 580 watts RMS on 3 channels at 4 ohms. Its Class D design ensures energy efficiency, allowing extended listening times with reduced battery consumption. The amplifier maintains low total harmonic distortion, contributing to clear audio reproduction. The Easy Tune function enables automatic audio parameter adjustment via the Fusion-Link™ app for optimized sound quality without manual adjustments.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and protection\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier is designed for the marine environment with IPX2 protection. The printed circuit boards feature conformal coating for enhanced protection against marine elements. Its thermo-lacquered aluminum chassis has been tested for resistance to salt spray, temperature variations, vibrations, and UV, in line with the True-Marine™ design. LED indicators are integrated to signal electrical issues, short circuits, and overheating. The device is spark-proof and includes a 125 A electronic fuse to prevent damage from overcurrent, undercurrent, excessive temperatures, and output short circuits. It operates at 10.8 V to 16 V DC and comes with a 3-year warranty.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFusion MS-AP61800\u003c\/strong\u003e offers two mounting options: either via an included bracket for quick attachment\/detachment, or directly onto the mounting surface using countersunk screws for tight spaces. It comes with proprietary cable connectors to simplify wiring and high-power mode adapters to facilitate channel bridging. The unit weighs 2.7 kg (5.95 lbs) and measures 297 x 180 x 45 mm (without bracket) or 297 x 180 x 50 mm (with bracket).\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073422668116,"sku":"010-02284-65","price":619.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_2286e883-5363-4d43-9187-9eb3b53fae73.jpg?v=1781108868"},{"product_id":"fusion-amplificateur-marin-ms-ap82400-8-canaux-classe-d","title":"Marine amplifier MS-AP82400","description":"\u003cp\u003e\n    The \u003cstrong\u003eFusion MS-AP82400\u003c\/strong\u003e marine amplifier is designed to deliver high-quality audio in demanding marine environments. This 8-channel amplifier, with a peak power of 2400 watts, is optimized for Fusion DSP-compatible marine audio systems and Fusion speakers.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and efficiency\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-AP82400 delivers 150 watts RMS per channel across 8 channels at 4 ohms (14.4V, \u003c1% THD), or 290 watts RMS per channel at 2 ohms. In bridged mode, it provides 580 watts RMS across 4 channels at 4 ohms. Its Class-D design ensures high energy efficiency, reducing current draw and enabling extended listening sessions. It can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. The amplifier features electronic protection with a 125 A fuse, requiring no replacement, and operates on a 10.8 V to 16 V DC supply.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with True-Marine™ design, this amplifier is tested to withstand salt spray, temperature variations, vibrations, and UV exposure. Its IPX2 rating protects against water droplets. The printed circuits are coated with conformal coating for added protection, and the thermo-lacquered aluminum finish ensures durability and modern aesthetics. The Easy Tune feature, accessible via the Fusion-Link™ app with a compatible Fusion DSP stereo system, automatically adjusts audio settings for optimal sound quality. The amplifier is specifically designed for exclusive use with Fusion DSP-compatible stereo systems (such as Apollo RA770, RA670, WB670, and MS-RA210) and Fusion speakers, ensuring seamless integration and performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-AP82400 is designed for easy installation with proprietary cable connectors and an included mounting bracket, allowing for quick or direct mounting. LED indicators enable rapid identification of electrical issues, short circuits, and temperature alerts. Built-in intelligent protection circuits safeguard the unit against overcurrent, undervoltage, output short circuits, and other faults. The unit weighs 3.15 kg. Its dimensions without the bracket are 359 x 180 x 45 mm (L x W x H) and with the bracket 359 x 180 x 50 mm (L x W x H).\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073425158484,"sku":"010-02284-85","price":733.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_7b9cb9e2-8953-4a76-ab11-b07385e79f47.jpg?v=1781108889"},{"product_id":"jl-audio-amplificateur-marin-mhd900-5-900w-5-canaux","title":"JL Audio MHD900\/5 Marine Amplifier","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MHD900\/5\u003c\/strong\u003e marine amplifier is a five-channel audio solution designed for marine environments. It features JL Audio’s patented Single Cycle Control™ Class D technology across all channels, delivering reference-grade sound performance across the full frequency range. This amplifier stands out for its compact size and ability to deliver significant power while reducing the electrical system’s current draw on the boat.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio Performance and Power\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMHD900\/5\u003c\/strong\u003e delivers a total continuous RMS power of 900 watts. Its four main channels provide 100 watts RMS x 4 at 4 ohms (between 11 and 14.5 volts) or 75 watts RMS x 4 at 1.5–3 ohms. In bridged mode, these channels reach 200 watts RMS x 2 at 8 ohms or 150 watts RMS x 2 at 3–6 ohms. The dedicated subwoofer channel delivers 500 watts RMS x 1 at 1.5–4 ohms. The amplifier provides a frequency response of 12 Hz to 28,000 Hz for the main channels and 12 Hz to 10,000 Hz for the subwoofer channel, with a deviation of +0\/-1 dB. The signal-to-noise ratio is 108 dBA at full power, and total harmonic distortion (THD+N) is less than 0.03% for the main channels at 4 ohms and less than 0.05% for the subwoofer channel at 4 ohms.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Technologies and Marine Durability\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with JL Audio’s R.I.P.S. (Regulated, Intelligent Power Supply) power supply technology, the \u003cstrong\u003eJL Audio MHD900\/5\u003c\/strong\u003e maintains consistent output power across a load impedance range of 1.5 to 4 ohms and voltage range of 11V to 14.5V. The RealSink™ thermal management system uses vertically cast alloy heat sink fins for efficient heat dissipation without a fan, allowing stacking of MHD amplifiers. Marine durability is ensured by white and gray powder-coated finishes, a sealed control cover, and stainless-steel hardware, providing resistance to corrosion, salt spray, and UV exposure. The amplifier also includes advanced thermal shutdown protection to prevent unexpected shutdowns.\n\u003c\/p\u003e\n\n\u003ch3\u003eSignal Processing and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The studio-grade signal processing of the \u003cstrong\u003eMHD900\/5\u003c\/strong\u003e includes variable high-pass filters for the main channels (50–500 Hz, selectable slopes of 12 or 24 dB\/octave) and a variable low-pass filter for the subwoofer channel (50–500 Hz, slopes of 12 or 24 dB\/octave). A switchable subsonic filter at 30 Hz (24 dB\/octave) is included on the subwoofer channel to protect speakers. The balanced differential inputs minimize electrical noise and accept either preamp-level or speaker-level signals. Its compact (27.3 cm L x 4.9 cm H x 21.1 cm D) and stackable design simplifies installation in tight spaces, and the power and speaker connectors are removable for easier setup.","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076425494868,"sku":"010-03103-00","price":1049.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_9b5f9363-053f-4c12-9499-0f1fa252d516.jpg?v=1781127670"},{"product_id":"jl-audio-amplificateur-marin-mhd600-4-24v","title":"Marine amplifier MHD600\/4-24V","description":"\u003cp\u003e\n    Designed for 24 V marine electrical systems, the \u003cstrong\u003eJL Audio MHD600\/4-24v\u003c\/strong\u003e marine amplifier is a 4-channel Class D sound system solution. It delivers a continuous RMS power of 150 W x 4 at 1.5–4 Ω or 300 W x 2 bridged at 3–8 Ω, with an operating voltage of 22–29 VDC. Its frequency response ranges from 6 Hz to 30 kHz (+0, -1 dB), and it features a signal-to-noise ratio exceeding 110 dB.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnology and Audio Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMHD600\/4-24v\u003c\/strong\u003e amplifier integrates the patented Single-Cycle Control™ technology, which applies output correction more than 400,000 times per second, ensuring precise audio quality with reduced current consumption and thermal dissipation. Its R.I.P.S. (Regulated, Intelligent Power Supply) power supply technology ensures stable output power across a wide impedance range of 1.5 to 4 ohms per channel, optimizing performance with various speaker systems. The total harmonic distortion plus noise (THD+N) is less than 0.03% at 4 Ω per channel at nominal power, and the damping factor exceeds 300 at 4 Ω \/ 50 Hz.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Design and Flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring a marine-grade design, the \u003cstrong\u003eJL Audio MHD600\/4-24v\u003c\/strong\u003e is equipped with white and gray powder finishes, a sealed control cover, and stainless-steel hardware, meeting international standards for salt spray and UV resistance. Its compact Realsink™ chassis requires no fans and allows stacking without compromising cooling. The balanced-differential inputs effectively reject noise, accepting high-level speaker signals. Advanced thermal protection adjusts operation to prevent thermal shutdown. It can be configured as a 4-channel amplifier, 2-channel bridged, or a 3-channel system (150 W x 2 satellites and 300 W x 1 subwoofer). Removable power and speaker terminals facilitate installation.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076430704980,"sku":"010-03104-00","price":897.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_bc969594-9196-4cb1-b0be-61081b8de44b.jpg?v=1781127689"},{"product_id":"jl-audio-amplificateur-marin-mx280-4-4-canaux-ipx7","title":"Marine amplifier MX280\/4","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MX280\/4\u003c\/strong\u003e marine amplifier is a complete four-channel audio solution designed for marine environments and motorized sports. This Class D amplifier delivers a continuous RMS power of 50 W x 4 at 4 ohms or 70 W x 4 at 2 ohms at 14.4 V. In bridged configuration, it provides 140 W RMS x 2 at 4 ohms at 14.4 V. At 12.5 V, the power is 36 W RMS x 4 at 4 ohms, 52 W RMS x 4 at 2 ohms, or 100 W RMS x 2 bridged at 4 ohms.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring JL Audio’s NexD™ high-speed switching technology, this amplifier ensures efficient power delivery without overloading the vehicle or vessel’s charging systems. Its compact die-cast aluminum chassis is built for high corrosion resistance. It carries an IPX7 waterproof rating, making it capable of withstanding immersion up to 1 meter for 30 minutes and powerful water jets. The construction includes a robust powder-coated finish, a sealed control cover, and stainless-steel hardware, ensuring enhanced durability in marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Audio Features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMX280\/4\u003c\/strong\u003e offers a frequency response of 20 Hz to 20 kHz (+0, -1 dB) and a signal-to-noise ratio exceeding 89.5 dB. It includes independent front and rear crossovers configurable as full-range, high-pass, or low-pass filters with a 12 dB\/octave slope and adjustable frequency from 35 to 300 Hz. The dual-range input section accepts RCA signal voltages from 250 mV to 4 V RMS (low) or 750 mV to 15 V RMS (high), allowing flexible integration with various audio sources. The amplifier can be configured in 4-channel, 3-channel, or 2-channel bridged modes, offering versatility for different sound system architectures.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076436242772,"sku":"010-03105-00","price":227.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_f2f80fbd-ad35-4539-b9e9-117db40002a6.jpg?v=1781127711"},{"product_id":"jl-audio-amplificateur-marin-mx500-4-500w-ipx7","title":"Marine amplifier MX500\/4","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MX500\/4\u003c\/strong\u003e marine amplifier is a four-channel audio solution designed for marine environments and motorized sports. It uses JL Audio’s NexD™ Class D switching technology to deliver 500 watts RMS distributed across four channels. Its design is optimized for high-fidelity audio performance without overloading the vessel’s charging systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and marine robustness\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier delivers 70 watts RMS x 4 at 4 ohms, 125 watts RMS x 4 at 2 ohms, or 250 watts RMS x 2 in bridged mode at 4 ohms. Its frequency response ranges from 20 Hz to 20 kHz (+0, -1 dB) with a signal-to-noise ratio greater than 88 dB (A-weighted). Total harmonic distortion (THD+N) is less than 1% at 2 ohms per channel. To accommodate different speaker configurations, it features adjustable high-pass and low-pass filters (35–300 Hz, 12 dB\/octave).\n\u003c\/p\u003e\n\u003cp\u003e\n    Built for durability in marine environments, the \u003cstrong\u003eMX500\/4\u003c\/strong\u003e amplifier features a compact die-cast aluminum chassis resistant to corrosion, with a powder-coated finish. It is rated IPX7 for water resistance, supporting immersion up to 1 meter for 30 minutes provided the control panel cover is properly installed. Balanced differential inputs help minimize noise induced by cables, a key advantage in marine installations. An advanced protection system (Advanced Rollback Protection System) prevents thermal shutdown under extreme conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The amplifier is compatible with 12-volt negative-ground electrical systems. It accepts both low-level (RCA, 250 mV – 4 V RMS) and high-level (750 mV – 15 V RMS) input signals, enabling integration with various audio sources. For power, a 4 AWG gauge cable is recommended for both positive and negative leads. A 50A external fuse (AFS, AGU, or MaxiFuse™) must be installed within 45 cm of the battery’s positive terminal. Its compact dimensions (237 mm L x 45 mm H x 115 mm D) facilitate installation in tight spaces. The unit ships with four stainless-steel mounting screws and a user manual.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076442141012,"sku":"010-03106-00","price":288.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_c4d44e7d-a6a8-4194-921f-a34341263f1f.jpg?v=1781127733"},{"product_id":"jl-audio-amplificateur-marin-xdm1000-1-1000w-classe-d","title":"JL Audio XDM1000\/1 Marine Amplifier","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM1000\/1\u003c\/strong\u003e marine monoblock amplifier is designed to power subwoofers with high output in a compact form factor. Featuring JL Audio’s NexD™ Class D switching technology, this amplifier optimizes energy efficiency while minimizing footprint and heat generation, making it suitable for marine and automotive environments.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and reliability in marine environments\u003c\/h3\u003e\n\u003cp\u003e\n    With a marine-grade build, the XDM1000\/1 amplifier chassis is weather-resistant. It features a black powder-coated finish, a sealed control cover, and stainless-steel hardware to resist corrosion. It delivers a continuous RMS power output of 1000 watts x 1 at 2 ohms (under 14.4V), 800 watts x 1 at 3 ohms, and 600 watts x 1 at 4 ohms. Under 12.5V, it provides 800 watts RMS x 1 at 2 ohms, 650 watts x 1 at 3 ohms, and 500 watts x 1 at 4 ohms. Its frequency response ranges from 7 Hz to 500 Hz (+0, -1dB), with a signal-to-noise ratio \u003e83 dB.\n\u003c\/p\u003e\n\u003ch3\u003eSignal integration and control\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM1000\/1\u003c\/strong\u003e features differential-balanced inputs for effective noise suppression and a dual-mode input filter for clarity in marine and automotive environments. It includes a variable low-pass filter adjustable from 50 to 500 Hz (12 or 24 dB\/octave slope) and a switchable\/removable subsonic filter at 30 Hz (24 dB\/octave) to protect subwoofers. The RCA inputs accept a voltage range of 200 mV to 4 V RMS. The amplifier supports automatic turn-on via DC offset or signal detection. Advanced \"rollback\" protection maintains amplifier operation under thermal overload. A remote level control (HD-RLC or MHD-RLC) is available for convenient bass level adjustment.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076448137556,"sku":"010-03112-00","price":568.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_582b9608-b304-4ad5-914d-a42d03c00c6d.jpg?v=1781127752"},{"product_id":"jl-audio-amplificateur-marin-xdm1000-5-canaux-1000w","title":"JL Audio XDM1000\/5 Marine Amplifier","description":"\u003cp\u003eDesigned for marine and automotive environments, the JL Audio XDM1000\/5 is a 5-channel Class D amplifier. It delivers a total RMS power of 1000 watts, capable of powering a complete audio system with satellite speakers and a subwoofer.\u003c\/p\u003e\n\u003ch3\u003ePower and architecture\u003c\/h3\u003e\n\u003cp\u003eThe XDM1000\/5 amplifier features NexD™ switching Class D amplification architecture. It provides RMS power of 75 watts x 4 channels + 400 watts x 1 channel at 4 ohms, or 100 watts x 4 channels + 600 watts x 1 channel at 2 ohms. In bridged mode, it delivers 200 watts RMS x 2 channels at 4 ohms + 600 watts RMS x 1 channel at 2 ohms. The minimum impedance load is 2 ohms in stereo mode and 4 ohms in bridged mode for channels 1 to 4, and 2 ohms for the mono subwoofer channel.\u003c\/p\u003e\n\u003ch3\u003eAudio processing and connectivity\u003c\/h3\u003e\n\u003cp\u003eThe filtering system includes variable high-pass filters for channels 1 and 2 (50-500 Hz, 12 dB\/octave) with a x10 multiplier for a range of 500-5000 Hz. Channels 3 and 4 feature variable high-pass or band-pass filters (50-500 Hz, 12 dB\/octave). The subwoofer channel is equipped with a low-pass filter (50-500 Hz, 12 or 24 dB\/octave). The unit can be configured as an active 3-way crossover. The differential balanced inputs reduce noise, and the input sensitivity accepts up to 4 Vrms for speaker-level inputs. The unit features automatic turn-on via signal detection or DC offset, and is compatible with optional HD-RLC or MHD-RLC remote level controllers.\u003c\/p\u003e\n\u003ch3\u003eConstruction and installation\u003c\/h3\u003e\n\u003cp\u003eThe XDM1000\/5 is built to marine standards with a black powder-coated finish, a sealed control cover, and stainless-steel hardware. For safety, an 80A fuse is required on the main power cable, installed within 45 cm of the battery’s positive terminal. Power wiring requires 4 AWG cable.","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076454723924,"sku":"010-03113-00","price":732.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_055306c7-d8ac-4449-8445-be3a29d34465.jpg?v=1781127773"},{"product_id":"jl-audio-amplificateur-marin-xdm200-2","title":"Marine amplifier XDM200\/2","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM200\/2\u003c\/strong\u003e marine amplifier is a compact Class D audio solution designed for automotive and marine installations. It delivers a total power output of 200 watts RMS, distributed across 2 channels to efficiently power your sound system.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and power\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier delivers 75 watts RMS x 2 channels at 4 ohms or 100 watts RMS x 2 channels at 2 ohms at 14.4V. In bridged mode, it provides 200 watts RMS x 1 channel at 4 ohms. At 12.5V, the power output is 60 watts RMS x 2 channels at 4 ohms, 90 watts RMS x 2 channels at 2 ohms, and 180 watts RMS x 1 channel at 4 ohms in bridged mode. The frequency response ranges from 12 Hz to 22 kHz (+0, -1dB), with a signal-to-noise ratio exceeding 104 dB and total harmonic distortion (THD+N) below 1% at 2 ohms per channel. The minimum impedance is 2 ohms in stereo mode and 4 ohms in bridged mode.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and protection\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eXDM200\/2\u003c\/strong\u003e integrates JL Audio’s NexD™ high-speed switching Class D technology, enabling full-bandwidth operation with low distortion and high efficiency. It features a dual-mode input filter for noise-free performance in marine and automotive electrical systems. The differentially balanced inputs help eliminate noise. For flexible integration, it includes RCA inputs (200 mV - 4 V RMS) and high-level speaker inputs. The signal or DC offset detection function ensures automatic power-on. Advanced Rollback Protection safeguards the amplifier against thermal shutdown. Variable high-pass or low-pass filters (12 dB\/octave) with an adjustable cutoff frequency from 50 to 500 Hz are included.\n\u003c\/p\u003e\n\u003cp\u003e\n    Designed for marine environments, its chassis features marine-grade construction with a black powder-coated finish, a sealed control cover, and stainless-steel hardware. Its compact dimensions are 52 mm (H) x 174 mm (L) x 180 mm (D) with a net weight of 1.70 kg. The recommended power\/ground connection is 8 AWG, with a 20A fuse to be installed within 45 cm of the battery’s positive terminal.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076458295636,"sku":"010-03114-00","price":352.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_471b620f-4e8f-4167-a450-973b91d5b442.jpg?v=1781127798"},{"product_id":"jl-audio-amplificateur-marin-xdm400-4-canaux","title":"JL Audio XDM400\/4 Marine Amplifier","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM400\/4\u003c\/strong\u003e marine amplifier is a robust and compact audio solution designed for automotive and marine installations. Featuring NexD™ Class D switching technology, it delivers 400 watts RMS with high efficiency and minimal distortion across a wide bandwidth, from 12 Hz to 22 kHz (+0, -1dB).\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Design\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eXDM400\/4\u003c\/strong\u003e provides 75 watts RMS x 4 channels at 4 ohms or 100 watts RMS x 4 channels at 2 ohms at 14.4V, with total harmonic distortion (THD+N) below 1% at 2 ohms per channel. In bridged mode, it delivers 200 watts RMS x 2 channels at 4 ohms. Its signal-to-noise ratio exceeds 104 dB at rated power (A-weighted) and exceeds 84 dB (A-weighted) at 1 W. It features an RCA input sensitivity of 200 mV to 4 V RMS.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    This model includes variable active high-pass and low-pass filters with adjustable cutoff frequency from 50 to 500 Hz and a slope of 12 dB\/octave. Connectivity is optimized with balanced differential inputs, reducing noise induced by cables. The chassis is weather-resistant with a black powder-coated finish, a sealed control cover, and stainless-steel hardware, ensuring durability in demanding marine environments. The amplifier features advanced thermal protection, adjusting output power to prevent shutdowns in case of overheating. It is compatible with optional remote level controllers HD-RLC or MHD-RLC. For power, a 40 A fuse (AFS, AGU, or MaxiFuse™) is required, with minimum 4 AWG wiring for power and ground. Its dimensions are 216 mm (width) x 52 mm (height) x 180 mm (depth).\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076459442516,"sku":"010-03115-00","price":467.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_c28ca275-d06b-4225-bbd9-c953e5ce4b27.jpg?v=1781127820"},{"product_id":"jl-audio-amplificateur-marin-xdm600-1-subwoofer-classe-d","title":"Marine amplifier XDM600\/1","description":"\u003cp\u003e\n    Designed for demanding marine and automotive environments, JL Audio’s \u003cstrong\u003emarine amplifier XDM600\/1\u003c\/strong\u003e is a Class D mono-block amplifier specifically built for subwoofers. It delivers 600 watts RMS at 2 ohms and 400 watts RMS at 4 ohms (at 14.4V and 1% THD), providing efficient amplification for low-frequency reproduction.\n\u003c\/p\u003e\n\n\u003ch3\u003eNexD™ Technology and Robust Design\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eXDM600\/1 amplifier\u003c\/strong\u003e features JL Audio’s exclusive NexD™ switching technology, which delivers high efficiency and significant power output in a compact form factor. Its design meets marine standards, using weather-resistant materials, a black powder-coated chassis, a sealed control cover, and stainless-steel hardware, making it suitable for offshore installations. The damping factor is greater than 500 at 2 ohms and 50 Hz, and THD+N is less than 1% at rated power.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Audio Performance\u003c\/h3\u003e\n\u003cp\u003e\n    With a frequency response of 7 Hz to 500 Hz (+0, -1dB), this amplifier is optimized for subwoofers. It includes a variable low-pass filter, continuously adjustable from 50 to 500 Hz with selectable slopes of 12 or 24 dB\/octave, as well as a switchable subsonic filter at 30 Hz (24 dB\/octave). Its balanced-differential inputs minimize noise, allowing connection to various audio sources, including OEM systems with an RCA input voltage range of 200 mV to 4 V RMS. A dual-mode input filter (car\/marine) is included for interference-free performance in different electrical environments. The amplifier features automatic turn-on via DC offset or signal detection and is compatible with optional HD-RLC or MHD-RLC remote level controllers for easy bass-level adjustment. Advanced protection includes thermal rollback, which monitors amplifier temperature and adjusts operation to prevent shutdowns. The recommended fuse is 50 A (AFS, AGU, or MaxiFuse™), and the recommended power\/ground wire gauge is 4 AWG. Dimensions are approximately 216 mm L x 52 mm H x 180 mm D.","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076459934036,"sku":"010-03116-00","price":427.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_5d7171c9-4922-4dd6-93b5-f69d47feb789.jpg?v=1781127841"},{"product_id":"jl-audio-amplificateur-marin-xdm600-6-6-canaux-600w","title":"JL Audio XDM600\/6 Marine Amplifier","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM600\/6 marine amplifier\u003c\/strong\u003e is designed for demanding audio installations in marine and automotive environments. This Class D amplifier integrates JL Audio’s NexD™ high-speed switching technology, delivering full-bandwidth operation with low distortion and high energy efficiency. It provides 75 watts RMS per channel at 4 ohms or 100 watts RMS per channel at 2 ohms across its six channels, and can be bridged to deliver 200 watts on three channels at 4 ohms.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Construction and Technical Features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM600\/6\u003c\/strong\u003e is built for marine environments, featuring a weather-resistant chassis, black powder-coated finish, sealed control cover, and stainless-steel hardware. Each channel bank includes a 12 dB\/octave filter configurable as low-pass or high-pass, with a variable cutoff frequency from 50 to 500 Hz. The balanced differential inputs minimize noise and accept signals from preamp or speaker-level sources up to 4Vrms, with automatic turn-on via DC offset or signal detection.\n\u003c\/p\u003e\n\n\u003ch3\u003eFlexibility and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Measuring approximately 26.2 cm wide, 5.1 cm high, and 18.1 cm deep, its compact design simplifies installation in tight spaces. The XDM600\/6 offers multiple configuration options: it can operate as a six-channel satellite amplifier, a four-channel amplifier with staggered power (200 W x 2 for front, 75 W x 2 for rear), or drive two subwoofers at 200 W each and a pair of satellites at 75 W x 2. Advanced protection against thermal overload prevents shutdown, ensuring continuous audio playback. An optional remote level controller (HD-RLC or MHD-RLC) can be added for easy adjustment.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076460753236,"sku":"010-03117-00","price":568.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_f3e48bee-37d4-409c-9be2-9211be36baea.jpg?v=1781127862"},{"product_id":"jl-audio-amplificateur-marin-xdm700-5-5-canaux-700w","title":"JL Audio XDM700\/5 Marine Amplifier","description":"\u003cp\u003e\n    The JL Audio XDM700\/5 marine amplifier is a 5-channel Class D amplification solution designed for demanding marine environments. This unit delivers audiophile-grade sound in a compact format, capable of powering a complete audio system with four satellite speakers and a subwoofer.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and power\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring JL Audio’s NexD™ high-speed switching amplification technology, the \u003cstrong\u003eJL Audio XDM700\/5\u003c\/strong\u003e provides high efficiency and low distortion. At 14.4 V, it delivers 75 W RMS x 4 channels at 4 Ω, 100 W RMS x 4 channels at 2 Ω, and 200 W RMS x 2 channels in bridged mode at 4 Ω for the main channels. The subwoofer channel outputs 180 W RMS at 4 Ω and 300 W RMS at 2 Ω. At 12.5 V, the power outputs are 60 W RMS x 4 at 4 Ω, 90 W RMS x 4 at 2 Ω, and 180 W RMS x 2 in bridged mode at 4 Ω for the main channels, with the subwoofer channel maintaining 180 W RMS at 4 Ω and 300 W RMS at 2 Ω. The main channels have a frequency response of 12 Hz to 22 kHz (+0, -1 dB), while the subwoofer channel ranges from 10 Hz to 1 kHz (+0, -1 dB). The signal-to-noise ratio exceeds 104 dB for the main channels, and the total harmonic distortion plus noise (THD+N) is below 1% at 2 Ω per channel. The amplifier accepts RCA input voltage from 200 mV to 4 V RMS.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and advanced features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM700\/5\u003c\/strong\u003e is built specifically for marine environments, using marine-grade materials, a sleek black powder-coated finish, a removable and watertight top cover for controls, and stainless-steel fasteners. Its advanced filtering system allows precise configuration: channels 1 and 2 feature a 12 dB\/octave high-pass filter (50 Hz - 5 kHz, with a x10 multiplier for 500-5000 Hz); channels 3 and 4 include a 12 dB\/octave high-pass or band-pass filter (50-500 Hz); and the subwoofer channel offers a variable-slope low-pass filter (selectable 12 dB\/octave or 24 dB\/octave) with a 50-500 Hz cutoff frequency. These filters can be configured for a 3-way crossover. A dual-mode input filter ensures noise-free performance in marine and automotive environments. The unit also features automatic turn-on via signal detection or DC offset, balanced differential inputs to eliminate electrical noise, and advanced thermal rollback protection to prevent shutdowns due to overheating. An optional level remote (HD-RLC or MHD-RLC) can be added for adjustments from the helm.\n\u003c\/p\u003e\n\n\u003ch3\u003ePhysical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The amplifier dimensions are 52 mm (height), 260 mm (width), and 180 mm (depth). Its net weight is 2.79 kg. A 60 A fuse (AFS, AGU, or MaxiFuse™) is required for circuit protection.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076461244756,"sku":"010-03118-00","price":631.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_0dd41df5-231a-4bd3-b7f9-0cbdc1c3f436.jpg?v=1781127882"},{"product_id":"jl-audio-amplificateur-marin-xdm800-8-classe-d","title":"JL Audio XDM800\/8 Marine Amplifier","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM800\/8 marine amplifier\u003c\/strong\u003e is designed for marine and automotive sound systems, delivering a total RMS power of 800 watts across 8 channels. Featuring JL Audio’s NexD™ Class D switching technology, it provides high energy efficiency with minimal distortion, enabling high output power in a compact chassis.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and versatility\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier delivers 75 watts RMS per channel at 4 ohms or 100 watts RMS per channel at 2 ohms at 14.4 V, with less than 1% THD. In bridged mode, it provides 200 watts RMS across 4 channels at 4 ohms. Its frequency response ranges from 12 Hz to 22 kHz (+0, -1 dB), and its signal-to-noise ratio exceeds 104 dB. The RCA inputs accept 200 mV to 4 V RMS signals. Variable high-pass and low-pass filters (50–500 Hz, 12 dB\/octave) are available for each pair of channels and can be bypassed for flexible configuration.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine-grade robust design and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM800\/8\u003c\/strong\u003e features a marine-grade construction with corrosion-resistant materials, a black powder-coated finish, a sealed control cover, and stainless-steel hardware, ensuring protection against marine elements and corrosion. It includes a dual-mode input filter and balanced differential inputs for effective noise suppression. Automatic turn-on capability offers multiple options (signal detection, DC offset detection, or +12 V trigger wire) for simplified integration with existing systems. Signal-processing potentiometers are protected by a sealed safety cover.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076461441364,"sku":"010-03119-00","price":750.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_1a17dd75-c41b-427a-a8d7-5bb85ac65adb.jpg?v=1781127905"},{"product_id":"jl-audio-amplificateur-marin-xdm600-6-24v","title":"JL Audio XDM600\/6-24V Marine Amplifier","description":"\u003cp\u003e\n    Designed specifically for 24-volt marine electrical systems, the \u003cstrong\u003eJL Audio XDM600\/6-24V\u003c\/strong\u003e marine amplifier is a full-range 6-channel Class D amplifier. It features marine-grade construction and a fully aluminum powder-coated enclosure for increased corrosion resistance, ensuring reliable operation in marine environments.\n\u003c\/p\u003e\n\u003ch3\u003eAudio performance and NexD™ technology\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier delivers 75 watts RMS per channel at 4 ohms (28.8 V, \u003c1% THD) and 100 watts RMS per channel at 2 ohms (28.8 V, \u003c1% THD). In bridged mode, it can provide 200 watts on 3 channels at 4 ohms (28.8 V, \u003c1% THD). The NexD™ Ultra-High Speed Class D switching technology enables full-range operation with high energy efficiency, minimal distortion, and reduced heat and current draw. Its frequency response ranges from 12 Hz to 22 kHz (+0, -1 dB), with a signal-to-noise ratio exceeding 104 dB.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM600\/6-24V\u003c\/strong\u003e is equipped with 12 dB\/octave crossover filters for each channel group, configurable as low-pass or high-pass, with continuously variable cutoff frequency from 50 to 500 Hz. It features a dual-mode input filter for noise-free performance in marine and automotive environments, as well as automatic turn-on capability via signal detection or DC offset. The amplifier accepts an input voltage from 200 mV to 4 V RMS. All controls are protected under a removable, waterproof top cover, while balanced differential inputs help eliminate noise for a clean audio signal. Advanced \"rollback\" protection prevents shutdown due to thermal overload.\n\u003c\/p\u003e\n\u003ch3\u003eConfiguration options\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier offers various configuration options: it can operate as a six-channel satellite amplifier (6 x 75 W at 4 Ω), a four-channel amplifier with stepped power (2 x 200 W at 4 Ω for front satellites and 2 x 75 W at 4 Ω for rear satellites), or to power two subwoofers (2 x 200 W) and a pair of satellites (2 x 75 W). It is compatible with optional waterproof HD-RLC or MHD-RLC remote level controllers for direct adjustment from the helm.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076461769044,"sku":"010-03120-00","price":627.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_dedcce8a-6dde-4151-b865-4ec8f1e95ddb.jpg?v=1781127926"},{"product_id":"jl-audio-amplificateur-marin-mhd600-4-canaux-600w","title":"Marine amplifier MHD600\/4","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MHD600\/4\u003c\/strong\u003e marine amplifier is a full-range 4-channel audio solution designed for marine environments. It features the patented Single Cycle Control™ Class D technology, which ensures precise amplification by comparing the audio signal to the actual PWM waveform and making corrections over 400,000 times per second. This approach controls distortion and maintains sound quality.\n\u003c\/p\u003e\n\n\u003ch3\u003ePower management and audio performance\u003c\/h3\u003e\n\u003cp\u003e\n    With an RMS power output of 150 watts x 4 channels at 1.5–4 ohms in stereo, or 300 watts x 2 channels at 3–8 ohms in bridged mode, the \u003cstrong\u003eMHD600\/4\u003c\/strong\u003e delivers a total power output of 600 watts. It operates on 12V DC electrical systems (11–14.5 volts). The R.I.P.S. (Regulated, Intelligent Power Supply) power supply ensures consistent output power and low distortion across varying load impedances (1.5Ω to 4Ω) and fluctuating input voltages. Its frequency response ranges from 6 Hz to 30 kHz (+0, -1 dB), with a signal-to-noise ratio exceeding 110 dB.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust design and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The marine-grade design of the \u003cstrong\u003eJL Audio MHD600\/4\u003c\/strong\u003e includes white and gray powder-coated finishes, a sealed cover for controls, and stainless steel hardware, exceeding salt fog and UV exposure standards. The RealSink™ thermal management system with Rollback Protection uses a vertical cast-alloy heat sink that requires no fans, allowing stacking without compromising cooling. Differential balanced inputs minimize noise and reject interference. Variable high-pass and low-pass filters (50–500 Hz) with selectable slopes (12 or 24 dB\/octave) provide configuration flexibility. The \u003cstrong\u003eMHD600\/4\u003c\/strong\u003e also features removable RCA preamp outputs for audio system expansion and removable power and speaker connectors to simplify installation.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082824233300,"sku":"010-03319-00","price":846.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_840f2828-bc1b-4e52-8d3d-edab451fca45.jpg?v=1781187978"},{"product_id":"jl-audio-amplificateur-marin-mhd750-1-class-d-750w","title":"Marine amplifier MHD750\/1","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MHD750\/1\u003c\/strong\u003e marine amplifier is a single-block Class D model designed for marine audio systems. It delivers 750 watts RMS with an extended frequency response from 6 Hz to 8 kHz, making it suitable for subwoofers and mid-bass or mid-tweeter speaker systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Audio Technologies\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier integrates JL Audio’s patented Single Cycle Control™ Class D technology, which corrects the audio signal more than 400,000 times per second for precise amplification and minimal distortion. The R.I.P.S. (Regulated, Intelligent Power Supply) power supply optimizes output power, delivering a constant 750W RMS across impedances from 1.5 to 4 ohms. This design also ensures stable power output across a voltage range of 11 to 14.5 volts, contributing to improved audio fidelity.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Marine Design\u003c\/h3\u003e\n\u003cp\u003e\n    The MHD750\/1 is built to withstand marine environments. It features white and gray epoxy powder finishes, a sealed control cover, stainless steel hardware, and a corrosion-resistant aluminum chassis. The circuit boards are coated with a conformal coating for enhanced protection against saltwater, spray, and UV exposure. Its RealSink™ thermal management system uses vertically cast alloy heat sink fins for efficient fanless cooling, allowing compact stacking of amplifiers.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With compact dimensions (49 mm H x 273 mm L x 199 mm D) and a weight of 3.69 kg, the MHD750\/1 offers flexible installation options. It includes balanced differential inputs to minimize noise and a flexible crossover section with high-pass or low-pass filter modes (50–500 Hz, 12 or 24 dB\/octave) and a switchable 30 Hz infrasonic filter (24 dB\/octave). The preamp outputs allow signal cascading to additional amplifiers. The power and speaker terminals are removable for easier installation. A 60A fuse is recommended for protection, with minimum 4 AWG copper power\/ground wiring.","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082829312340,"sku":"010-03320-00","price":739.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_3b3ddcba-8ac5-40f8-91e4-c497a53ed054.jpg?v=1781187999"},{"product_id":"jl-audio-amplificateur-marin-mhd900-5-24v","title":"Marine amplifier MHD900\/5-24V","description":"\u003cp\u003e\n    Designed for 24 V marine electrical systems, the \u003cstrong\u003eJL Audio MHD900\/5-24V\u003c\/strong\u003e marine amplifier is a five-channel Class D solution delivering a total power output of 900 W. It features patented Single Cycle Control™ technology for accurate sound amplification and reduced current draw. This model is suitable for driving a complete high-performance marine audio system.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Technologies for Marine Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMHD900\/5-24V\u003c\/strong\u003e incorporates Single Cycle Control™ technology, which corrects the audio signal more than 400,000 times per second, ensuring precise amplification, reduced heat, and lower power consumption. Its R.I.P.S. (Regulated, Intelligent Power Supply) power supply optimizes output for load impedances from 1.5 to 4 ohms per channel, delivering stable power across a wide range of vessel voltages and minimizing distortion. The amplifier maintains 80% efficiency at half nominal power, contributing to its compact size.\n\u003c\/p\u003e\n\n\u003ch3\u003ePower and Configuration Flexibility\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier delivers continuous (RMS) power of 100 watts x 4 main channels at 4 ohms (22–29 V) or 75 watts x 4 at 1.5 to 3 ohms (22–29 V). The subwoofer channel provides 500 watts x 1 at 1.5 to 4 ohms (22–29 V). The main channels can be bridged for 200 watts RMS x 2 at 8 ohms or 150 watts RMS x 2 at 3–6 ohms. The frequency response is 12 Hz to 28 kHz for the main channels and 12 Hz to 10 kHz for the subwoofer channel. Total harmonic distortion (THD) is less than 0.03% for the front\/rear channels and less than 0.05% for the subwoofer, both at nominal power under 4 ohms. Variable high-pass (50–500 Hz, 12 or 24 dB\/octave) and low-pass (50–500 Hz, 12 or 24 dB\/octave) filters, along with a switchable subsonic filter (30 Hz, 24 dB\/octave) on the subwoofer, enable precise integration. The signal-to-noise ratio is 108 dBA at nominal power and 88 dBA at 1 watt.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Simplified Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MHD900\/5-24V\u003c\/strong\u003e is engineered for the marine environment with white and gray powder finishes, a sealed control cover, and stainless steel hardware. It exceeds international standards for salt spray and UV resistance. The RealSink™ Heat Management system, featuring cast-alloy heat sink fins and an innovative circuit design, prevents thermal shutdown. Differential-balanced inputs eliminate onboard electrical noise, accepting both preamp-level and speaker-level signals. Removable power and speaker terminals simplify installation in confined spaces. Dimensions are 4.9 cm height, 27.3 cm width, and 19.9 cm depth (up to 24.1 cm), with a weight of 3.1 kg. Recommended fuse protection is 30A (AFS, AGU, or MaxiFuse™).\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082833768788,"sku":"010-03321-00","price":1039.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_779b8666-4395-4be1-8171-6cef063594f0.jpg?v=1781188014"},{"product_id":"jl-audio-amplificateur-marin-mx300-1-300w-ipx7","title":"Marine amplifier MX300\/1","description":"\u003cp\u003e\n    Designed for marine environments and power sports, the monobloc amplifier \u003cstrong\u003eJL Audio MX300\/1\u003c\/strong\u003e delivers stable and efficient audio power. Using a Class D design with JL Audio’s NexD™ switching technology, this amplifier optimizes power delivery while minimizing distortion without overloading charging systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMX300\/1\u003c\/strong\u003e provides an RMS power of 160 watts x 1 channel at 4 ohms, 220 watts x 1 channel at 3 ohms, and 300 watts x 1 channel at 2 ohms at 14.4V. At 12.5V, it delivers 160 watts at 4 ohms, 200 watts at 3 ohms, and 250 watts at 2 ohms. Its frequency response is 20 Hz to 12 kHz (+0, -1dB), with total harmonic distortion (THD) below 1% at 2 ohms and a signal-to-noise ratio exceeding 85 dB (A-weighted).\n\u003c\/p\u003e\n\u003cp\u003e\n    Rated IPX7, this amplifier withstands immersion up to 1 meter for 30 minutes, making it suitable for wet conditions. Its corrosion-resistant die-cast aluminum chassis, powder-coated finish, and stainless-steel hardware contribute to its durability. Controls are protected by a sealed cover with a gasket.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The amplifier features a variable low-pass filter adjustable from 35 to 300 Hz with a 12 dB\/octave slope, as well as a variable subsonic filter from 20 to 40 Hz to protect subwoofers. A variable Bass Boost from 0 to 12 dB, centered at 43 Hz, is also available. The dual-range input section accepts both preamp-level signals (RCA) and high-level speaker signals (via adapter). The balanced differential inputs are designed to reduce audio signal noise. The advanced thermal rollback protection prevents amplifier shutdown due to thermal overload. An output polarity switch simplifies system adjustment. A remote bass controller (RBC-1 or M-RBC-1) can be connected for easy subwoofer level adjustment.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082837045588,"sku":"010-03324-00","price":228.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_e09373be-f552-41ff-9f68-819b176282f2.jpg?v=1781188034"},{"product_id":"jl-audio-amplificateur-marin-mx500-1-mono-500w-ipx7","title":"Marine amplifier MX500\/1","description":"\u003cp\u003e\n    Designed for marine environments and motorized sports, the \u003cstrong\u003eJL Audio MX500\/1\u003c\/strong\u003e monoblock amplifier is a compact Class D audio solution. It integrates JL Audio’s NexD™ switching technology, enabling efficient power delivery and high audio fidelity in a reduced form factor. This amplifier is optimized for 12-volt negative-ground electrical systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and marine robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMX500\/1\u003c\/strong\u003e amplifier delivers a continuous RMS power output of 300 watts at 4 ohms, 400 watts at 3 ohms, and up to 500 watts at 2 ohms at 14.4V. Its frequency response ranges from 20 Hz to 12 kHz (+0, -1dB), with a signal-to-noise ratio exceeding 97 dB at nominal power. Total harmonic distortion plus noise (THD+N) is less than 1% at 2 ohms, ensuring clear sound reproduction.\n\u003c\/p\u003e\n\u003cp\u003e\n    The marine-grade design features a corrosion-resistant die-cast aluminum chassis with a black powder-coated finish and a gasketed control cover. Stainless steel mounting hardware enhances durability. The unit is IPX7 certified, allowing it to withstand immersion in water up to 1 meter for 30 minutes, provided the control panel is properly closed.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and advanced settings\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MX500\/1\u003c\/strong\u003e features dual-range input sections, accepting both preamp-level (RCA) signals or high-level speaker-level inputs with switchable input voltage ranges from 250mV - 4V RMS (low) to 750mV - 15V RMS (high). Balanced differential inputs help reduce noise. It includes a variable low-pass filter from 40 to 400 Hz with a 24 dB\/octave slope, as well as a variable subsonic filter from 20 to 40 Hz with a 12 dB\/octave slope. A Bass Boost function adjustable from 0 to 12 dB at 43 Hz is also included.\n\u003c\/p\u003e\n\u003cp\u003e\n    Thermal protection is provided by an Advanced Rollback Protection system, preventing shutdowns due to overheating. A polarity reverse switch allows precise adjustments. For remote control of the subwoofer output level, the amplifier is compatible with the optional JL Audio M-RBC-1 remote level control (sold separately). Power requirements include a 50A external fuse (not included) and 4 AWG gauge wiring for power and ground.","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082840486228,"sku":"010-03325-00","price":286.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_e3bfd9c8-0ca8-4f91-ad5b-0891c18a3222.jpg?v=1781188054"},{"product_id":"jl-audio-amplificateur-marin-mx600-3-canaux","title":"Marine amplifier MX600\/3","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MX600\/3\u003c\/strong\u003e marine amplifier is a compact Class D 3-channel audio solution designed for marine environments and motorized sports. It delivers an RMS power of 75 W x 2 + 250 W x 1 at 4 Ω, or 100 W x 2 + 400 W x 1 at 2 Ω at 14.4V. Thanks to JL Audio’s NexD™ switching technology, it provides efficient power delivery with low distortion.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring a compact cast-aluminum chassis, the MX600\/3 amplifier is corrosion-resistant. It holds an IPX7 waterproof rating, allowing it to withstand immersion up to 1 meter for 30 minutes when the control panel cover is properly installed. Its black powder-coated finish, sealed cover, and stainless-steel hardware enhance durability in harsh conditions. Dimensions are 45 mm (H) x 237 mm (W) x 115 mm (D).\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and audio performance\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier offers a frequency response of 20 Hz to 20 kHz and a signal-to-noise ratio of 88 dB, with THD+N below 1.0% at 2 Ohms rated power. Its dual-range input section accepts signals from 250 mV to 14 V, whether line-level (RCA) or high-level (speaker-level). The balanced differential inputs minimize electrical noise. For sound optimization, the front channels (1 and 2) include a variable high-pass filter (35-300 Hz, 12 dB\/octave), while the subwoofer channel (channel 3) features a variable low-pass filter (40-400 Hz, 24 dB\/octave), a variable subsonic filter (20-40 Hz, 12 dB\/octave), and variable bass boost (0-12 dB at 43 Hz). A subwoofer polarity switch (0-180°) is also included. A remote level control (M-RBC-1 or RBC-1) can be connected for convenient subwoofer level adjustment. Power requires a 4 AWG cable and a 60A external fuse (not included), installed within 45 cm of the battery.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082842714452,"sku":"010-03326-00","price":308.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_46ae313e-9070-4b8f-af8b-24aa702ed7b5.jpg?v=1781188072"},{"product_id":"jl-audio-amplificateur-marin-mv600-1-subwoofer-nexd2","title":"Marine amplifier MV600\/1","description":"\u003cp\u003e\n    The JL Audio MV600\/1 marine monoblock amplifier is designed for subwoofer amplification in marine environments. It integrates JL Audio’s second-generation high-speed switching NexD2™ Class D technology, optimized to deliver low-frequency amplification with high energy efficiency. This amplifier is configured via the JL Audio TüN™ app on an external device (PC, tablet, or phone) connected via a USB A\/B cable.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and Marine Design\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMV600\/1\u003c\/strong\u003e delivers 400 watts RMS per channel at 4 ohms (14.4V), 600 watts RMS per channel at 2 ohms (14.4V), and 500 watts RMS per channel at 3 ohms (14.4V). Its frequency response ranges from 12 to 500 Hz (+0, -1 dB). The signal-to-noise ratio is 90 dB at rated power (A-weighted) and 64 dB at 1 watt. The damping factor exceeds 125 dB at 50 Hz (at 4 and 2 ohms), with total harmonic distortion (THD) below 1% at rated RMS power.\n\u003c\/p\u003e\n\u003cp\u003e\n    Its construction is specifically suited for marine environments, featuring a compact cast-alloy chassis, marine-grade powder coating, and corrosion-resistant connectors and hardware. The amplifier has an IPX2 waterproof rating when mounted vertically with connections facing downward, allowing it to withstand indirect splashes. The \u003cstrong\u003eJL Audio MV600\/1\u003c\/strong\u003e is designed to operate with 12-volt DC negative-ground electrical systems.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Amplifier settings, including input gain, are adjusted using JL Audio’s TüN™ app. The amplifier lacks an onboard digital signal processor (DSP) or traditional physical controls; it is designed to receive its input signals and any signal processing from the pre-outs of a full-range MVi amplifier. It features pre-amp\/speaker-level inputs (a speaker-to-RCA adapter may be required for speaker-level input) with balanced differential inputs to minimize noise. Analog pre-outs (4V RMS) are included for system expansion. The unit integrates JLid™ connections for optional accessories (MVi-HUB, M-DRC-50, VXi-BTC). The removable power connector with screw terminals simplifies installation. Use 4 AWG power and ground cables and a 50-amp fuse (not included) is recommended. Dimensions are 285 mm (W) x 52 mm (H) x 176 mm (D) with a weight of approximately 2.27 kg (5 lbs).\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082847236436,"sku":"010-03334-00","price":657.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_ba1dab25-eae5-460e-aee1-c58338b24cca.jpg?v=1781188091"},{"product_id":"amplificateur-marin-mv1000-1","title":"Marine amplifier MV1000\/1","description":"\u003cp\u003eThe \u003cstrong\u003eJL Audio MV1000\/1 marine amplifier\u003c\/strong\u003e is a monoblock Class D model designed to power one or more subwoofers in demanding marine audio installations. It delivers 1000 W RMS and uses NexD2™ technology to provide high power with good electrical efficiency while maintaining a size suitable for boat technical compartments and consoles.\u003c\/p\u003e\u003ch3\u003eSubwoofer amplification\u003c\/h3\u003e\u003cp\u003eThe MV1000\/1 is intended for low frequencies: it does not replace a full-range amplifier for loudspeakers but complements an installation with M3, M6, or M7 subwoofers. Configuration is done via the JL Audio TüN™ software from a computer, tablet, or phone connected via USB, allowing precise adjustment of level, filters, and bass response.\u003c\/p\u003e\u003ch3\u003eOnboard installation\u003c\/h3\u003e\u003cp\u003eThe amplifier operates on a 12 V DC negative-ground network. It must be mounted in a dry, ventilated area with connections facing downward to maintain IPX2 resistance. Power wiring must be properly sized, protected by a fuse or circuit breaker near the battery, and preferably made of tinned copper for marine use.\u003c\/p\u003e\u003ch3\u003eSkysat advice\u003c\/h3\u003e\u003cp\u003eChoose this if the basket includes a genuine need for powerful bass, for example with a high-power JL Audio subwoofer. First check the impedance and acceptable power of the subwoofer, then plan the power supply, DC protection, and ventilation space before validating the mounting location.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082851397972,"sku":"010-03335-00","price":863.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_583874e5-b886-4805-b640-1e54b68353b4.jpg?v=1781188110"},{"product_id":"jl-audio-amplificateur-marin-mv600-2i-600w-dsp","title":"Marine amplifier MV600\/2i","description":"\u003cp\u003e\n    The JL Audio \u003cstrong\u003eMV600\/2i\u003c\/strong\u003e marine amplifier is a 2-channel, full-range Class D solution featuring second-generation NexD2™ technology and an advanced digital signal processor (DSP). Designed for marine environments, it delivers high-fidelity audio amplification with high efficiency.\n\u003c\/p\u003e\n\u003ch3\u003eAudio performance and power\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier delivers 180 watts RMS x 2 at 4 ohms or 300 watts RMS x 2 at 2 ohms at 14.4 V. In bridged mode, it reaches 600 watts RMS x 1 at 4 ohms. At 12.5 V, the power outputs are 140 watts RMS x 2 at 4 ohms, 225 watts RMS x 2 at 2 ohms, and 450 watts RMS x 1 bridged at 4 ohms. The frequency response ranges from 12 Hz to 24 kHz (+0, -1 dB), with a signal-to-noise ratio of 99 dB (A-weighted) and THD+N below 1% at 2 ohms per channel. The damping factor is greater than 100 at 4 ohms and 50 Hz, and greater than 50 at 2 ohms and 50 Hz.\n\u003c\/p\u003e\n\u003ch3\u003eIntegrated digital signal processing (DSP)\u003c\/h3\u003e\n\u003cp\u003e\n    The MV600\/2i features a 24-bit 96 kHz DSP (AKM AK7738) for full audio configuration. All amplifier settings and DSP functions are controlled via JL Audio’s TüN™ software, available on PC, Mac, tablets, and smartphones, replacing traditional analog controls. DSP capabilities include input routing and mixing, adjustable gain controls with clipping indicators, fully adjustable high-pass, low-pass, and band-pass filters (selectable slopes from 6 to 48 dB\/octave), a 10-band equalizer (graphic or parametric), phase and polarity control, and time alignment in 0.02 ms (1\/4\") increments.\n\u003c\/p\u003e\n\u003ch3\u003eMarine design and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Housed in a compact cast-alloy chassis with corrosion-resistant marine-grade powder finish and marine-rated connectors, the amplifier is rated IPX2 when mounted vertically with connections facing downward. NexD2™ technology uses DirectFET™ outputs and a reduced-loop design for high efficiency and sound fidelity. It features four balanced differential analog inputs (RCA) accepting signal levels up to 16 V RMS, ensuring effective noise rejection. High-level speaker inputs are configurable via adapter. Four processed analog preamp outputs (4 V RMS max) allow sharing DSP capabilities with other amplifiers. JLid™ connectivity supports optional accessories such as the network hub, Bluetooth communicator (VXi-BTC), and digital remote control (DRC-205 with adapter). The amplifier includes an automatic power-on function triggered by DC offset or signal detection.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082854773076,"sku":"010-03336-00","price":746.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_f9ea4817-1ddd-4c6e-a15b-c1f1308fc364.jpg?v=1781188130"},{"product_id":"jl-audio-amplificateur-marin-mv400-4i-400w-dsp","title":"Marine amplifier MV400\/4i","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eJL Audio MV400\/4i\u003c\/strong\u003e amplifier is a 4-channel Class D model featuring second-generation NexD2™ technology. It delivers reference-grade audio amplification with significant energy efficiency while integrating advanced digital signal processing.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio Performance and Digital Processing\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMV400\/4i\u003c\/strong\u003e provides continuous RMS power of 75 watts x 4 at 4 ohms or 100 watts x 4 at 2 ohms at 14.4V. In bridged mode, it reaches 200 watts x 2 at 4 ohms, for a total power of 400 watts. It is equipped with an integrated 24-bit 96 kHz digital signal processor (DSP), replacing traditional analog settings with software configuration. The frequency response is 12 Hz to 24 kHz (+0, -1dB), with a signal-to-noise ratio of 99 dB (A-weighted, referred to the highest nominal power, analog inputs) and total harmonic distortion (THD+N) below 1% at nominal power. Input sensitivity is 250mV to 16V for analog inputs, with a minimum impedance of 2 ohms unbridged and 4 ohms bridged.\n\u003c\/p\u003e\n\n\u003ch3\u003eConfiguration and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    All amplifier and DSP features are configurable via the JL Audio TüN™ app on an external device (PC, tablet, or smartphone) connected via USB cable or via the Bluetooth® option (with VXi-BTC). The DSP includes input routing and mixing, gain settings with clip indicators, adjustable high-pass, low-pass, and band-pass filters (slopes from 6 to 48 dB\/octave), a 10-band equalizer (graphic or parametric), phase and polarity control, and time alignment in 0.02 ms increments. The balanced differential inputs accept signal levels up to 16V RMS, ensuring excellent noise rejection. Automatic power-on is managed by DC offset or signal detection.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Design and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMV400\/4i\u003c\/strong\u003e amplifier features a compact cast-alloy chassis with high-quality marine-grade epoxy finish, corrosion-resistant hardware, and connectors. It has an IPX2 water resistance rating, meaning it can withstand indirect splashes when mounted vertically with connections facing downward. Dimensions are 52 mm (height), 285 mm (width), and 176 mm (depth), weighing 2.27 kg. Electrical connection requires a minimum 4 AWG power cable. It also includes configurable inputs\/outputs (4 preamp\/speaker inputs and 4 analog preamp outputs processed at 4V RMS) and JLid™ connectivity for optional accessories (such as the Network Hub, Bluetooth Communicator, or digital remote control).\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082861228372,"sku":"010-03337-00","price":773.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_8991e36e-7bb0-430e-9a0a-b6c4304f70a9.jpg?v=1781188149"},{"product_id":"jl-audio-amplificateur-marin-mv600-6i-dsp-600w","title":"JL Audio MV600\/6i Marine Amplifier","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MV600\/6i\u003c\/strong\u003e marine amplifier is a six-channel Class D audio solution designed for demanding marine environments. It integrates JL Audio’s second-generation NexD2™ switching technology, delivering reference-grade amplification with optimized efficiency and advanced processing power. Unlike traditional analog systems, this amplifier includes a digital signal processor (DSP) for precise configuration and tuning via the JL Audio TüN™ app on PC, tablet, or smartphone.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and digital processing\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMV600\/6i\u003c\/strong\u003e delivers a total RMS power of 600 watts, with 75 watts x 6 channels at 4 ohms or 100 watts x 6 channels at 2 ohms (at 14.4V). In bridged mode, it provides 200 watts x 3 channels at 4 ohms. Its frequency response ranges from 12 Hz to 24 kHz (+0, -1dB), with a signal-to-noise ratio of 99 dB (analog inputs, maximum power) and THD+N below 1% at 2Ω per channel. The integrated 24-bit \/ 96 kHz DSP enables comprehensive sound control, including input routing and mixing, adjustable gains with clipping indicators, fully adjustable high-pass, low-pass, and band-pass filters, a 10-band equalizer, phase and polarity controls, and time alignment in 0.02 ms increments.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Built for marine environments, the \u003cstrong\u003eJL Audio MV600\/6i\u003c\/strong\u003e features a compact cast-alloy chassis with a marine-grade powder-coated finish and corrosion-resistant hardware. It is rated IPX2 when mounted vertically with connections facing downward. Its differential balanced inputs accept signal levels up to 16V RMS, reducing electrical noise. It also includes high-level speaker inputs and six processed analog preamp outputs (4V RMS) to extend DSP capabilities to other amplifiers. The JLid™ system enables communication with optional accessories for control and preset selection. All connections are grouped on one side for easier installation in tight spaces. Recommended power\/ground wiring is 4 AWG minimum, with a 50 A fuse. Dimensions are 355 mm (width) x 176 mm (depth) x 52 mm (height).\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082864111956,"sku":"010-03338-00","price":1008.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_f9eb1ccf-ae28-4d9f-8968-bbb0c543793c.jpg?v=1781188169"},{"product_id":"jl-audio-amplificateur-marin-mv800-8i-dsp-800w","title":"Marine amplifier MV800\/8i","description":"\u003cp\u003e\n    Designed for demanding marine environments, the JL Audio MV800\/8i marine amplifier is an 8-channel audio amplification solution featuring a full digital signal processor (DSP) and JL Audio’s second-generation NexD2™ Class D switching technology.\n\u003c\/p\u003e\n\u003ch3\u003eAudio Performance and Processing\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MV800\/8i\u003c\/strong\u003e delivers a total RMS power output of 800 watts, distributed as 75 watts per channel at 4 ohms or 100 watts per channel at 2 ohms. In bridged mode, it provides 200 watts per 4 channels at 4 ohms. Its frequency response ranges from 12 Hz to 24 kHz (+0, -1dB), with a signal-to-noise ratio of 99 dB and total harmonic distortion (THD) below 1%. The integrated 24-bit, 96 kHz DSP enables precise optimization of each channel via the JL Audio TüN™ app on PC, tablet, or smartphone. Adjustments include input routing, mixing, gain controls with clip indication, fully adjustable high-pass, low-pass, and band-pass filters (with selectable slopes from 6 to 48 dB\/octave), a 10-band equalizer, phase and polarity control, and time alignment in 0.02 ms increments.\n\u003c\/p\u003e\n\u003ch3\u003eMarine Design and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Its compact die-cast alloy chassis, coated with marine-grade powder and fitted with corrosion-resistant connectors, ensures durability in marine environments. It features 8 configurable preamp\/speaker-level inputs (accepting signals up to 16V RMS) with balanced differential inputs for effective noise rejection, and 4 processed analog preamp outputs (4V RMS). JLid™ connectivity allows integration of optional accessories such as the Network Hub, VXi-BTC Bluetooth communicator, or M-DRC-50 digital remote control. The amplifier also includes automatic turn-on via DC offset or signal detection, and advanced overheat protection via an innovative circuit. For IPX2 water resistance, vertical mounting with connections facing downward is recommended.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The amplifier dimensions are 355 mm (width) x 52 mm (height) x 176 mm (depth) with a weight of 2.54 kg (5.6 lbs). It is designed for 12V DC negative-ground electrical systems and requires 4 AWG power and ground cables with an 80-amp fuse. Up to six sound presets can be stored for quick recall via the optional M-DRC-50.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082868339028,"sku":"010-03339-00","price":1154.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_1c03224e-db4e-4e8f-891b-26ee2647535e.jpg?v=1781188188"},{"product_id":"jl-audio-amplificateur-marin-mv700-5i-5-canaux-700w-dsp","title":"JL Audio MV700\/5i Marine Amplifier","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MV700\/5i\u003c\/strong\u003e marine amplifier is a 5-channel Class D amplification solution specifically designed for marine environments. It integrates JL Audio’s second-generation NexD2™ technology, delivering high-quality audio amplification with high energy efficiency. This model features an integrated digital signal processor (DSP) for detailed audio control without traditional analog adjustments.\n\u003c\/p\u003e\n\n\u003ch3\u003ePower and Audio Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMV700\/5i\u003c\/strong\u003e delivers a total RMS power of 700 watts at 14.4V. The main channels provide 75 W x 4 at 4 Ω, or 100 W x 4 at 2 Ω. In bridged mode, they reach 200 W x 2 at 4 Ω. The subwoofer channel offers 180 W x 1 at 4 Ω, 240 W x 1 at 3 Ω, and 300 W x 1 at 2 Ω. The frequency response is 12 Hz to 24 kHz (+0, -1dB) for the main channels and 12 Hz to 1 kHz (+0, -1dB) for the subwoofer channel. The signal-to-noise ratio is 99 dB for both types of analog inputs.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Digital Processing and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This model integrates an AKM® triple-core DSP with 24-bit 96 kHz digital processing, offering comprehensive audio tuning capabilities. Configuration and tuning are performed via JL Audio’s TüN™ software applications, compatible with PC, Mac, iOS, or Android, through a wired USB connection or an optional Bluetooth® VXi-BTC communicator. The DSP allows routing and mixing of inputs, adjustable gain controls with clip indicators, fully adjustable high-pass, low-pass, and band-pass filters (6-48 dB\/octave), a 10-band equalizer (graphic or parametric), phase and polarity control, and time alignment in 0.02 ms increments.\n\u003c\/p\u003e\n\u003cp\u003e\n    The differential-balanced analog inputs provide noise rejection and accept input signals from 250 mV to 16 V RMS. The JLid™ System Command system facilitates integration with optional JLid™ accessories and multi-amplifier systems. The amplifier also features 6 preamplified analog outputs (4V RMS) with independent DSP processing and an automatic power-on function via signal detection or DC offset.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Design and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for durability in marine environments, the \u003cstrong\u003eMV700\/5i\u003c\/strong\u003e amplifier has a compact cast-alloy chassis with a marine-grade powder-coated finish and corrosion-resistant fasteners and connectors. It is rated IPX2 for water resistance when mounted vertically with connections facing downward. Its dimensions are approximately 355 mm x 52 mm x 176 mm (L x H x D). A 60 A fuse (AFS, AGU, or MaxiFuse™) is recommended for system protection.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082871845204,"sku":"010-03340-00","price":928.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_44bb1000-e704-4950-aadc-fc4576362b30.jpg?v=1781188208"},{"product_id":"jl-audio-amplificateur-marin-mv1000-5i-5-canaux-dsp","title":"Marine amplifier MV1000\/5i","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio MV1000\/5i\u003c\/strong\u003e marine amplifier is a 5-channel Class D audio solution designed for marine environments. It integrates JL Audio’s NexD2™ technology, the second generation of high-speed switching, and an integrated digital signal processor (DSP), delivering precise and efficient audio amplification.\n\u003c\/p\u003e\n\u003ch3\u003eAudio performance and power\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier delivers a total RMS power of 1000 watts. It provides 75 watts RMS x 4 channels + 400 watts RMS x 1 channel at 4 ohms, and 100 watts RMS x 4 channels + 600 watts RMS x 1 channel at 2 ohms. In bridged mode, it reaches 200 watts RMS x 2 channels at 4 ohms + 600 watts RMS x 1 channel at 2 ohms. Its frequency response ranges from 12 to 24,000 Hz, with a total harmonic distortion (THD) of 1%.\n\u003c\/p\u003e\n\u003ch3\u003eIntegrated DSP and TüN™ configuration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eMV1000\/5i\u003c\/strong\u003e features a 24-bit\/96 kHz DSP, enabling full configuration of inputs and outputs. All amplifier settings and DSP features, including input routing, gain controls with clip indicators, adjustable high-pass, low-pass, and band-pass filters, a 10-band equalizer, phase and polarity control, and time alignment, are managed via JL Audio’s TüN™ software. This software is accessible via a USB connection from a computer. For tablets or smartphones, it is accessible via Bluetooth with an optional accessory (VXi-BTC).\n\u003c\/p\u003e\n\u003ch3\u003eRobust design for marine environments\u003c\/h3\u003e\n\u003cp\u003e\n    Built with a compact die-cast alloy chassis, the amplifier features a marine-grade powder-coated finish, corrosion-resistant connectors and hardware, and a conformal-coated printed circuit board. These features enable it to withstand marine conditions. It achieves an IPX2 water resistance rating when mounted vertically with connections facing downward, meaning it can handle indirect splashes.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The amplifier has 8 configurable preamp\/speaker-level inputs, accepting signals up to 16 volts RMS, and 6 processed analog preamp outputs (4V RMS max) with independent DSP processing. Its balanced differential analog inputs ensure noise rejection. It also includes DC offset or signal detection for automatic power-on. JLid™ connections allow the addition of optional accessories such as the M-DRC-50 or VXi-BTC for enhanced control and networking. Power requires a maximum 2 AWG copper wire, with 4 AWG recommended, and an external 80-amp fuse is advised.","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082877284692,"sku":"010-03341-00","price":1094.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_3c789831-f895-4291-b151-280d3f8c7343.jpg?v=1781188227"},{"product_id":"jl-audio-amplificateur-marin-xdm500-3-3-canaux-500w","title":"JL Audio XDM500\/3 Marine Amplifier","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM500\/3\u003c\/strong\u003e marine amplifier is a 3-channel Class D amplification solution designed for embedded audio installations requiring reliable performance in marine environments. It delivers a total RMS power output of 500 watts, enabling it to power a stereo system and a subwoofer with a single compact unit.\n\u003c\/p\u003e\n\u003ch3\u003eAudio performance and power\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier provides an RMS power output of 75 W x 2 at 4 Ω or 100 W x 2 at 2 Ω for the main channels. In bridged mode, it reaches 200 W x 1 at 4 Ω. The dedicated subwoofer channel delivers 180 W x 1 at 4 Ω and up to 300 W x 1 at 2 Ω. The frequency response extends from 12 Hz to 22 kHz (+0, -1 dB) for the full-range channels and from 10 Hz to 1 kHz for the subwoofer channel, ensuring detailed sound reproduction. The total harmonic distortion (THD+N) is less than 1.0 % at 2 ohms.\n\u003c\/p\u003e\n\u003ch3\u003eMarine design and integrated technologies\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM500\/3\u003c\/strong\u003e features marine-grade construction with a black powder-coated finish, a sealed control cover, and stainless steel hardware, ensuring durability against the elements. It integrates JL Audio’s NexD™ switching amplification technology, which provides high efficiency, precise power delivery, and minimized heat generation, all in a compact form factor. The Advanced Rollback protection monitors the amplifier’s temperature and adjusts its operation to prevent thermal shutdown. The balanced differential inputs and dual-mode selectable input filter help reduce noise, common in vehicle and boat electrical systems.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and installation\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier is equipped with RCA inputs (200 mV - 4 V) and high-level speaker inputs for extended compatibility with various sources. It offers automatic turn-on capability via signal detection or DC offset. Preamp outputs are included for potential system expansion. The crossover filters are variable: high-pass (50-500 Hz, 12 dB\/octave) for the main channels and low-pass (50-500 Hz, 12 or 24 dB\/octave) for the subwoofer channel. A 4 AWG power cable is recommended, with a 50 A fuse to be installed within 45 cm of the battery’s positive terminal. Its dimensions are 52 mm in height, 216 mm in width, and 180 mm in depth, facilitating integration into tight spaces. It is compatible with optional water-resistant remote level controllers HD-RLC or MHD-RLC.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082883772756,"sku":"010-03343-00","price":460.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_eff8c0b4-7160-407c-bb51-59c0b91df090.jpg?v=1781188267"},{"product_id":"jl-audio-amplificateur-marin-xdm800-8-24v","title":"JL Audio XDM800\/8-24V marine amplifier","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eJL Audio XDM800\/8-24V\u003c\/strong\u003e amplifier is a complete 8-channel audio solution. It is specifically optimized for 24-volt electrical systems, delivering stable output power and high-quality sound reproduction. This amplifier integrates JL Audio’s high-speed NexD™ Class D switching technology, ensuring full-bandwidth operation with minimal distortion and high energy efficiency.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and power\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio XDM800\/8-24V\u003c\/strong\u003e delivers 75 watts RMS per channel at 4 ohms or 100 watts RMS per channel at 2 ohms, with a THD+N of 1% at 28.8V. In bridged mode, it can provide 200 watts RMS across 4 channels at 4 ohms. Its frequency response ranges from 20 Hz to 20 kHz, with a signal-to-noise ratio of 104 dB at rated power (A-weighted) and 84 dB at 1 watt (A-weighted), ensuring clear audio. Variable high-pass and low-pass filters (50–500 Hz, 12 dB\/octave) per channel pair allow precise acoustic tuning.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine-grade design and flexible integration\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier is built with marine-grade materials, including a black powder-coated finish, a sealed control cover, and stainless-steel hardware, ensuring durability and resistance to marine conditions. Balanced differential inputs help eliminate noise, while the dual-mode input filter ensures interference-free performance. The \u003cstrong\u003eJL Audio XDM800\/8-24V\u003c\/strong\u003e offers selectable input modes (2, 4, or 8 channels) to adapt to various system configurations. It features automatic turn-on via DC offset or signal detection. High-level speaker inputs up to 4Vrms are accepted, requiring Wire-to-RCA adapters. A wired remote level control (HD-RLC or MHD-RLC) is optional for adjustments from the helm. Dimensions are 36.83 cm (W) × 5.08 cm (H) × 18.10 cm (D). A 40-amp fuse is recommended, with 4 AWG power and ground cables.","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082885607764,"sku":"010-03344-00","price":777.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_b68ee3bc-13b2-4842-a184-84103cd6b418.jpg?v=1781188287"},{"product_id":"jl-audio-amplificateur-marin-ap300-1-monobloc-ip67","title":"Marine amplifier AP300\/1","description":"\u003cp\u003e\n    Designed specifically for marine environments and powerboat systems, the \u003cstrong\u003eJL Audio AP300\/1\u003c\/strong\u003e marine monoblock amplifier is a compact Class D amplifier dedicated to powering a single subwoofer channel. It is optimized to deliver controlled and robust bass output, even in harsh marine conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Marine Design\u003c\/h3\u003e\n\u003cp\u003e\n    This Class D monoblock amplifier delivers an RMS power output of 200 watts at 4 ohms or 300 watts at 2 ohms (with some sources indicating up to 350 watts at 2 ohms). Its high-efficiency design minimizes battery drain and heat dissipation. The amplifier chassis is IP67-rated for water and dust resistance (excluding cables) and is spark-proof, making it suitable for installations in engine compartments. Its frequency response ranges from 10 Hz to 500 Hz (+0, -1 dB or +0, -3 dB), with a signal-to-noise ratio exceeding 70 dB (A-weighted, 20 Hz–20 kHz, ref. 1 W).\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated Features and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio AP300\/1\u003c\/strong\u003e includes an LCD screen for direct access to essential settings, simplifying configuration and audio optimization. It supports JL Audio’s Easy Tune function when paired with a Fusion® system compatible with DSP and the Fusion® Audio app, enabling profile-based setup for optimized sound quality and system protection. Its 10 Hz to 500 Hz bandwidth is specifically tailored for subwoofers, featuring low-pass filters (20–500 Hz, 12 dB\/octave), a variable infrasonic filter (20–50 Hz, 12 dB\/octave), and adjustable bass boost (0–18 dB at 37 Hz). It also includes high-level speaker inputs for easy integration with OEM head units lacking RCA outputs. The system is protected by four-way circuitry against under\/over-voltage, overheating, and short circuits.\n\u003c\/p\u003e\n\n\u003ch3\u003eKey Technical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eAmplifier class: Class D\u003c\/li\u003e\n    \u003cli\u003eChannels: Monoblock (1 channel)\u003c\/li\u003e\n    \u003cli\u003eRMS power (14.4 V, \u003c1% THD): 200 W x 1 @ 4 ohms, 300 W x 1 @ 2 ohms\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 10 Hz – 500 Hz (+0, -1 dB or +0, -3 dB)\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: \u003e70 dB (A-weighted, 20 Hz–20 kHz, ref. 1 W)\u003c\/li\u003e\n    \u003cli\u003eOperating voltage: 9–16 VDC (or 10–16 V)\u003c\/li\u003e\n    \u003cli\u003eProtection rating: IP67 (amplifier chassis, excluding cables)\u003c\/li\u003e\n    \u003cli\u003eOperating temperature range: -20° to 65°C (4° to 149°F)\u003c\/li\u003e\n    \u003cli\u003eInput sensitivity: Low level: 0.2–2 V RMS, High level: 0.8–8 V RMS\u003c\/li\u003e\n    \u003cli\u003eRecommended fuse: 35A (AFS, AGU, or MaxiFuse™ types)\u003c\/li\u003e\n    \u003cli\u003eDimensions (H x W x D): 47 x 265 x 125 mm (1.86\" x 10.43\" x 4.90\")\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082917032276,"sku":"010-03428-00","price":349.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_ab56e40b-3492-4dc9-9ffb-e225e21845ce.jpg?v=1781188391"},{"product_id":"jl-audio-amplificateur-marin-ap300-4-canaux-classe-d","title":"Marine amplifier AP300\/4","description":"\u003cp\u003e\n    Designed for marine environments and power sports, the JL Audio AP300\/4 amplifier is a Class D 4-channel model delivering a total RMS power of 300 watts. It provides 50 W x 4 at 4 ohms, 75 W x 4 at 2 ohms, or 150 W x 2 in bridged mode at 4 ohms. Its frequency response ranges from 20 Hz to 20 kHz (+0, -1 dB or +0, -3 dB), with a signal-to-noise ratio exceeding 70 dB.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Marine Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio AP300\/4\u003c\/strong\u003e amplifier features a compact die-cast alloy chassis (47 x 265 x 125 mm), water- and dust-resistant with IP67 certification (excluding cables). It is also ignition-protected, making it suitable for marine conditions. It weighs 2.40 kg and operates within a temperature range of -20°C to 65°C. Built-in protection includes input under\/overvoltage, overheating, and output short-circuiting. Power requires minimum 4 AWG copper wiring and a recommended 35 A fuse.\n\u003c\/p\u003e\n\u003ch3\u003eAudio Flexibility and Adjustments\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio AP300\/4\u003c\/strong\u003e offers high versatility for marine audio systems. It can power up to four pairs of speakers in stereo mode (minimum 2 ohms per output) or be bridged for a subwoofer or a pair of speakers (minimum 4 ohms per output). The amplifier includes an integrated LCD screen for manual configuration and information display, as well as an Easy Tune feature for simplified tuning with Fusion® compatible car stereos equipped with DSP capabilities. Inputs accept sensitivities of 200 mV–2 V RMS (low) or 800 mV–8 V RMS (high) with input impedance of 11 kΩ (high) or 20 kΩ (low). It features an active 12 dB\/octave high-pass or low-pass filter, adjustable from 20 Hz to 500 Hz, and a Bass Boost equalizer from 0 to +18 dB centered at 37 Hz.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082919719252,"sku":"010-03429-00","price":349.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_a4063bf2-1acd-485a-b8e5-87f3e96f2058.jpg?v=1781188412"},{"product_id":"jl-audio-amplificateur-marin-ap600-6-canaux","title":"Marine amplifier JL Audio AP600\/6","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio AP600\/6\u003c\/strong\u003e marine amplifier is a compact Class D 6-channel solution designed to deliver up to 600 watts RMS of total power in demanding marine environments. This amplifier features a tiered power design optimized for versatile onboard audio configurations.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and versatile configurations\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio AP600\/6\u003c\/strong\u003e provides RMS power specific to each pair of channels. For channels 1 to 4, it delivers 50 watts x 4 at 4 ohms and 75 watts x 4 at 2 ohms. When bridged, these channels reach 150 watts x 2 at 4 ohms. Channels 5 and 6 provide higher power, with 100 watts x 2 at 4 ohms and 150 watts x 2 at 2 ohms. When bridged, the 5-6 pair can deliver 300 watts x 1 at 4 ohms. The frequency response extends from 20 Hz to 20 kHz (+0, -1 dB) across all channels, with a signal-to-noise ratio greater than 70 dB (A-weighted).\n\u003c\/p\u003e\n\u003ch3\u003eAdjustment and protection features\u003c\/h3\u003e\n\u003cp\u003e\n    Adjustment capabilities include variable 20–500 Hz low-pass and high-pass filters with a 12 dB\/octave slope. An infrasonic filter is available for channels 5 and 6, adjustable from 20 to 50 Hz. A bass boost function allows increasing the signal from 0 to +18 dB at 37 Hz. Input sensitivity is switchable between a low range (200 mV–2 V RMS) and a high range (800 mV–8 V RMS). The amplifier operates on 9–16 VDC and requires a recommended 70A fuse with 4 AWG power\/ground cable. It features a 4-way protection circuit against thermal overload, under-voltage, and speaker short-circuits. An integrated LCD screen and top-panel controls allow adjustment of parameters such as GAIN, HPF\/LPF filters, Bass Boost, and the infrasonic filter. The Easy Tune mode simplifies settings when paired with DSP-compatible audio systems.\n\u003c\/p\u003e\n\u003ch3\u003eRobust marine design\u003c\/h3\u003e\n\u003cp\u003e\n    The amplifier’s cast alloy chassis, rated IP67 for dust and water resistance (excluding cables), is also ignition-protected. These features ensure reliability in wet and exposed marine environments. It accepts both preamp-level (low-level) and speaker-level (high-level) inputs, though a speaker-to-RCA adapter is required for high-level inputs.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082922733908,"sku":"010-03430-00","price":429.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_fb5a7d8b-a5fd-4825-a5f2-95d31e73b7e8.jpg?v=1781188434"},{"product_id":"jl-audio-amplificateur-marin-ap200-4bt-bluetooth-ip67","title":"JL Audio AP200\/4BT Marine Amplifier","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio AP200\/4BT\u003c\/strong\u003e marine amplifier is a compact and rugged audio solution designed for marine and outdoor environments. Featuring a Class D topology, it delivers a total RMS power output of 200 watts across 4 channels, with 40 watts x 4 at 4 ohms or 50 watts x 4 at 2 ohms. It also supports a bridged configuration of 100 watts x 2 at 4 ohms.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    This model includes Bluetooth audio streaming, allowing direct connection with a smartphone or tablet without requiring a separate head unit. A wired remote control, rated IPX7, is included for volume and playback control. The remote offers multiple mounting options: flush, surface, or bar. The RCA inputs feature switchable sensitivity ranges (200 mV–2 V RMS low-level, 800 mV–8 V RMS high-level), complemented by a pair of pre-amplified outputs.\n\u003c\/p\u003e\n\u003ch3\u003eMarine-grade design and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The amplifier’s chassis is IP67-certified for water and dust resistance and is spark-proof, making it suitable for engine compartments and demanding marine conditions. Its compact size (47 x 185 x 125 mm) simplifies installation in tight spaces. The amplifier operates on 9 to 16 VDC and includes protection against input under\/overvoltage, overheating, and output short circuits. A 35 A fuse is recommended.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082924405076,"sku":"010-03431-00","price":394.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_7e54d3e4-1cc7-4ce9-a9b4-68ee6f9d0564.jpg?v=1781188454"},{"product_id":"jl-audio-amplificateur-marin-xdm300-1-subwoofer","title":"Marine amplifier XDM300\/1","description":"\u003cp\u003e\n    Designed for marine and automotive environments, the \u003cstrong\u003eJL Audio XDM300\/1\u003c\/strong\u003e Class D monoblock amplifier delivers 300 watts RMS for subwoofers. Featuring NexD™ switching amplification technology, it combines high energy efficiency with a compact form factor, ideal for installations where space is limited.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and marine robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eXDM300\/1\u003c\/strong\u003e provides 200 watts RMS at 4 ohms and 300 watts RMS at 2 ohms, with a frequency response from 10 to 1000 Hz. Its total harmonic distortion (THD) is less than 1% at 2 ohms, and its signal-to-noise ratio exceeds 100 dB (A-weighted, noise bandwidth 20 Hz to 20 kHz). The unit’s marine-grade construction includes a weather-resistant chassis, black powder-coated finish, sealed control cover, and stainless steel hardware. Dimensions are approximately 180 mm (W) x 174 mm (D) x 52 mm (H).\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced integration and protection\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with balanced differential inputs, this amplifier minimizes noise, ensuring consistent sound quality even in electrically noisy environments. It features automatic turn-on via signal detection or DC offset, simplifying integration with factory audio systems. A dual-mode input filter optimizes performance for marine or automotive use. The \u003cstrong\u003eJL Audio XDM300\/1\u003c\/strong\u003e includes advanced thermal protection, adjusting operation to prevent unexpected shutdowns. It supports a minimum impedance of 2 ohms. Input sensitivity ranges from 200 mV to 4 V (low-level inputs), and it includes a 30A fuse. The variable low-pass filter is adjustable from 50 to 500 Hz, with selectable slopes of 12 or 24 dB\/octave.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56082954027348,"sku":"010-03839-00","price":388.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_343dcf59-252b-4887-92b6-7e031501d48d.jpg?v=1781188556"}],"url":"https:\/\/skysat.fr\/en\/collections\/amplifiers.oembed","provider":"Skysat","version":"1.0","type":"link"}