{"title":"Sound system","description":"\u003ch2\u003eMarine audio: reliable and integrable embedded sound systems\u003c\/h2\u003e\n\u003cp\u003eA boat audio system is not chosen like a car installation. Speakers, sources, amplifiers and cables must withstand moisture, salt, UV, vibrations and long cable runs.\u003c\/p\u003e\n\u003cp\u003eSkysat groups here the Fusion, JL Audio and Clarion solutions suited for cockpits, flybridges, cabins and multi-zone installations. The goal is simple: clear sound while sailing, clean integration with the onboard network and an installation that remains reliable over time.\u003c\/p\u003e\n\u003ch3\u003eMain ranges\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSources and stereos\u003c\/strong\u003e: Apollo units, MediaMaster, black boxes and marine radios to control audio zones.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers and subwoofers\u003c\/strong\u003e: flush-mount, tower models, tweeters and enclosures to adapt sound distribution to each zone.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers\u003c\/strong\u003e: mono, 4-channel, 6-channel, 8-channel and multi-zone architectures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemote controls and interfaces\u003c\/strong\u003e: remote commands, NMEA 2000 and network bridges to maintain control from the helm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSkysat advice\u003c\/h3\u003e\n\u003cp\u003eStart by defining listening zones, then size speakers and amplification. On an open boat, sensitivity, RMS power and placement matter more than peak power. Planning tinned wiring, watertight pass-throughs and electrical protection before installing speakers avoids most rework.\u003c\/p\u003e","products":[{"product_id":"fusion-ampli-marin-signature-6-canaux-24v","title":"Signature range marine amplifier, 6 channels, 24V","description":"\u003cp\u003e\n    Designed for 24V marine audio systems, the Fusion SG-24DA61500 amplifier from the Signature range is a high-performance multichannel sound solution. It delivers a peak power of 1500W and an RMS power of 100W x 6 channels at 4 Ohms (at 28.8 Vdc) or 140W x 6 channels at 2 Ohms (at 28.8 Vdc). In bridged mode, it reaches 280W x 3 at 4 Ohms, offering flexibility to power a variety of speakers and subwoofers.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and efficiency\u003c\/h3\u003e\n\u003cp\u003e\n    The Class D design of this amplifier ensures energy efficiency, reducing current consumption (less than 1.25 A at idle, 35 A max) and heat dissipation. Featuring conformal-coated printed circuits, a rigid heat sink made of die-cast aluminum alloy, and a stainless steel finish, the SG-24DA61500 is built to Fusion’s True-Marine standards. These features ensure resistance to marine environments, including exposure to salt spray, temperature variations, vibrations, and UV, though it requires installation in a dry location.\n\u003c\/p\u003e\n\n\u003ch3\u003eFlexibility and integration\u003c\/h3\u003e\n\u003cp\u003e\n    With an extended frequency response from 10 Hz to 40 kHz, the amplifier integrates adjustable high-pass, low-pass, and full-band filters (from 32 Hz to 320 Hz with a 12 dB\/octave slope). It also offers adjustable bass boost (0 to 9 dB) specifically for zone 3, enabling precise sound customization. Its operating voltage of 21.6 to 32 Vdc is specifically designed for ships equipped with 24V electrical systems, setting it apart from the more common 12V amplifiers. This specificity makes it the preferred choice for demanding audio installations on larger boats, where stability and power are paramount.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723835269460,"sku":"010-02556-00","price":554.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d9439d39-3436-4114-856a-c16ff32bd8cd.jpg?v=1780432260"},{"product_id":"fusion-amplificateur-signature-8-canaux-2000w-marin","title":"Signature Series 8-Channel 2000W Marine Amplifiers","description":"\u003cp\u003e\n    Designed for demanding marine audio systems, the Fusion Signature Series 8-channel 2000W marine amplifier (model SG-DA82000) provides a high-power audio solution for complex installations. This Class D amplifier delivers 2000 W of peak power, with a nominal RMS power of 100 W per channel at 4 Ohm or 140 W per channel at 2 Ohm across its eight channels. It can also be bridge-mode configured to deliver 280 W RMS on four channels at 4 Ohm, offering flexibility to power a variety of speakers and subwoofers.\n\u003c\/p\u003e\n\n\u003ch3\u003eTrue-Marine™ design and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The Fusion Signature Series amplifier features True-Marine™ design, ensuring protection against harsh marine environments. Its printed circuits are coated with a conformal coating for enhanced resistance to elements. The die-cast aluminum chassis acts as a heat sink, with optimized fin layout to maximize surface area and improve thermal dissipation, contributing to system reliability. It weighs 5.2 kg and measures 420 mm x 210 mm x 57 mm.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a frequency response of 10 Hz to 40 kHz (-3 dB at 4 Ohm), this amplifier can reproduce an extended sound spectrum. It integrates adjustable high-pass and low-pass filters from 32 Hz to 320 Hz with a 12 dB\/octave slope, as well as adjustable Bass Boost from 0 to 9 dB for zones 2 and 4. These options allow precise customization of audio output for different types of speakers and subwoofers. The required power supply is 10.8 to 16 Vdc, with a maximum current draw of 100 A. The compass safe distance is 50 cm.\n\u003c\/p\u003e\n\u003cp\u003e\n    Positioned as a high-performance solution in Fusion’s Signature range, this amplifier stands out from basic models by its ability to handle complex multi-zone audio systems with high RMS power per channel. Compared to Class AB amplifiers, its Class D technology offers superior energy efficiency, reducing current draw and heat generation—a significant advantage for marine installations where power management is critical.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723835466068,"sku":"010-02162-00","price":686.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_7f02b86a-8ba4-436c-b6ed-fbda5eeaa249.jpg?v=1780432200"},{"product_id":"fusion-black-box-bb100-stereo-marine-compacte","title":"Black Box Fusion® BB100","description":"\u003cp\u003e\n    Designed for marine environments where space is a constraint, the Fusion Black Box BB100 audio system offers a discreet yet high-performance entertainment solution. This compact unit allows hidden installation, keeping the dashboard clear while delivering 200 W of audio power (50 W per channel) via its Class AB amplifier. It serves as an alternative to traditional main units such as the Fusion RA70 or MS-RA210, prioritizing minimal integration without compromising functionality.\n\u003c\/p\u003e\n\u003cp\u003e\n    Connectivity is a key feature of the BB100, integrating Bluetooth for wireless audio streaming, an RCA auxiliary input, and a USB 2.0 port compatible with MP3, Apple iAP2, and Android AOA. It is also DAB+ ready via an external module (MS-DAB100A, not included) and includes an AM\/FM tuner for European, American, and Japanese frequencies. Control is possible via the included IPX7 wired remote, which also integrates the Bluetooth receiver for improved range and reduced interference, or via a compatible multifunction display (MFD) through the NMEA 2000 interface (LEN 1, 50 mA) and Fusion-Link technology.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Audio Integration and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Fusion BB100 delivers a customized listening experience with its Multi-Zone™ technology, offering two independent audio zones. Each zone features pre-amplified RCA outputs (left, right) and a mono subwoofer output for Zone 1, allowing the addition of external amplifiers and system expansion. The True-Marine™ design ensures the unit (IPX3) and its wired remote (IPX7 on the front panel) are suited to harsh marine conditions, with an operating temperature range of 0 to 50°C and a 15 cm compass-safe distance.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and System Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    With dimensions of 155 mm x 60 mm x 94 mm for the unit and a 10.8 to 16 Vdc power supply, the BB100 is designed for flexible installation. It must be mounted vertically, with connectors facing down, to ensure IPX3 protection and optimal cooling. Its NMEA 2000 compatibility extends control and integration possibilities with existing navigation systems, enabling centralized audio management directly from the boat’s display or via Fusion-Link apps on mobile devices and Garmin watches.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723835859284,"sku":"010-01517-01","price":307.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_3d8b4902-9f3a-4ba6-860a-b594dca59f77.png?v=1780432142"},{"product_id":"fusion-cable-repartiteur-rca-femelle-vers-male-double","title":"RCA splitter cable, female to male dual","description":"\u003cp\u003eThe \u003cstrong\u003eRCA Fusion female-to-dual-male splitter cable\u003c\/strong\u003e duplicates an analog RCA audio link in a marine installation, for example between a Fusion source and multiple compatible amplification inputs.\u003c\/p\u003e\u003cp\u003eThis is an RCA audio cable, not a USB, HDMI, or video cable. Check the female-to-dual-male direction, the number of channels to connect, and available routing before ordering.\u003c\/p\u003e\u003ch3\u003eSkysat Tip\u003c\/h3\u003e\u003cp\u003eUse when the audio architecture requires splitting an RCA signal to two inputs. For a new installation, base the number of zones, amplifier channels, and cable length on avoiding cascading adapters.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723836023124,"sku":"010-12895-00","price":11.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/odoo-010-12895-00-main.png?v=1779307385"},{"product_id":"fusion-ms-ra70-stereo-marine-bluetooth-ipx7","title":"MS-RA70 Marine Stereo Systems with Bluetooth","description":"\u003cp\u003e\n    Designed specifically for the marine environment, the Fusion MS-RA70 stereo with Bluetooth offers a compact and functional audio entertainment solution. With a class AB amplifier delivering a peak power of 200W (50W x 4 channels) and 25W RMS x 4 channels under 4 Ohms, it efficiently powers your boat. Its monochrome LCD screen 128x64 optically bonded (2.6 inches) ensures clear visibility even in bright sunlight and is designed to prevent fogging, guaranteeing optimal use in various lighting conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and audio management\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-RA70 integrates Bluetooth for A2DP audio streaming with AVRCP control, allowing connection of up to eight compatible devices within a maximum range of 10 meters. A rear USB port supports MP3 audio file playback, compatibility with iPod\/iPhone devices via the IAP2 protocol, and Android via AOA, along with a 1A charging function. It also features an AM\/FM tuner with RDS and a stereo RCA auxiliary input for external sources. The system has two independent and amplified audio zones, with localized volume controls and the ability to name each zone. Pre-amplified outputs and a subwoofer output (for zone 1) are also included, requiring external amplification. DAB+ compatibility is possible by adding the optional Fusion MS-DAB100 module.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The front panel of the MS-RA70 is IPx7 certified, ensuring resistance to temporary immersion, while the rear of the unit is rated IPx3. Its marine construction is reinforced by a fiberglass-reinforced composite chassis and an aluminum heat sink with VCT cooling technology, eliminating the need for an external fan. The DIN standard format design facilitates replacement of older non-marine units, offering flush or recessed mounting options. It supports Fusion-Link control via Bluetooth, allowing management from a smartphone (iOS or Android) or a compatible Garmin ANT-connected smartwatch. Operating on a voltage of 10.8–16 VDC with a 15A fuse, this unit is designed for reliability. Unlike more advanced models such as the Apollo series, the MS-RA70 positions itself as an essential and robust marine audio solution focused on ease of use and efficient Bluetooth connectivity, ideal for boats not requiring complex native NMEA 2000 integration.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723836154196,"sku":"010-01516-01","price":324.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_fdacc533-baa4-41b4-90ec-f7f57a0cbbf4.jpg?v=1780426886"},{"product_id":"fusion-haut-parleur-marin-xs-classic-4-pouces-120w","title":"XS Classic 4\" 120W Marine Speaker","description":"\u003cp\u003e\n    Designed for discreet integration and reliable audio performance in a marine environment, the Fusion XS Classic 4\" 120W marine loudspeaker (model XS-F40CWB) is a compact choice for confined spaces. It delivers a peak power of 120 W and an RMS power of 30 W, with an efficiency of 87 dB (1 W\/1 m) for clear sound reproduction. Its frequency response ranges from 100 Hz to 18,000 Hz, with a nominal impedance of 4 ohms, and it is compatible with amplifiers delivering between 15 and 80 W RMS per channel.\n\u003c\/p\u003e\n\n\u003ch3\u003eTrue-Marine Design and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The XS Classic 4\" features Fusion’s True-Marine™ design, ensuring resistance to harsh marine environments, including salt spray, temperature variations, vibrations, and UV exposure. Its IP65 certification confirms protection against water and dust, while compliance with ISO12216 attests to its structural robustness and resistance to water ingress. The materials used, such as the injected polypropylene cone and rubber surround, ensure durability and consistent audio reproduction. The aluminum dome tweeter contributes to a smooth response in the high frequencies, enhancing musical clarity.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the Fusion XS Range\u003c\/h3\u003e\n\u003cp\u003e\n    Within the Fusion XS Classic series, this 4-inch model is the most compact option, ideal for installations where space is limited. Compared to the 6.5\" (200 W peak \/ 50 W RMS, 80 Hz–18 kHz, 91 dB) and 7.7\" (240 W peak \/ 60 W RMS, 70 Hz–18 kHz, 92 dB) models, the XS Classic 4\" offers a minimum mounting depth of 54 mm (vs. 67 mm and 77 mm respectively) and a mounting diameter of 99 mm (vs. 135 mm and 162 mm). This compact size makes it particularly suitable for cabins, small cockpits, or as an auxiliary speaker. It is optimized for mid and high frequencies, with an oversized voice coil to reduce distortion and fully sealed crossover components for enhanced protection and improved frequency response. The speaker comes with Classic white and black grilles, offering aesthetic flexibility to match the interior or exterior of your boat.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723836907860,"sku":"010-02199-00","price":93.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_103db703-c6c7-4a03-8529-1fae2aafabbb.png?v=1780432223"},{"product_id":"fusion-haut-parleurs-6-pouces-performance-250w-noir","title":"6\" Black Performance Speakers 250W","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eFusion PF-FR6030\u003c\/strong\u003e 6-inch speakers from the Performance series deliver clear and powerful audio aboard. These 3-way speakers are optimized for a full frequency range, enhancing the sound experience at sea.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Each speaker delivers a peak power of 250 watts and an RMS power of 45 watts. The frequency response ranges from 29 Hz to 27 kHz, with a sensitivity of 89 dB, ensuring sound fidelity. The 3-way design features a dedicated woofer, a midrange driver, and a tweeter for precise frequency separation, enabling detailed reproduction from bass to treble. The first-order crossover optimizes the transition between the different drivers.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine-grade design and durable materials\u003c\/h3\u003e\n\u003cp\u003e\n    The injection-molded polypropylene (IMPP) cone is lightweight and rigid, contributing to clean, distortion-free audio output. The dynamic-response butyl rubber surround ensures enhanced lateral stability and durability for sustained performance, even in harsh marine conditions. The silk dome tweeters, filled with ferrofluid, are designed for precise, natural, and smooth high-frequency reproduction while improving thermal dissipation and reliability. The steel basket provides a robust, corrosion-resistant structure. The overall design is specifically marine-rated, ensuring suitability for saltwater and humid environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eFlexible installation and aesthetic integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a mounting depth of 60 mm and a mounting diameter of 131 mm, these speakers suit various configurations. Their multi-fit and multi-mount design allows installation in 6-inch and 6.5-inch mounting applications, offering flexibility and reducing constraints during setup. The stylish, slim grille ensures discreet aesthetic integration in any vessel's cabin. The \u003cstrong\u003eFusion PF-FR6030\u003c\/strong\u003e speakers are a reliable option within Fusion’s Performance series, providing a balance of power and audio clarity for recreational boaters seeking a significant upgrade to their sound system without the demands of specialized audiophile ranges such as the brand’s Signature series or competing products focused on extreme performance.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723837071700,"sku":"PF-FR6030","price":60.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c89d39a5-9bd4-4d73-85da-61aefa5b190b.jpg?v=1779962851"},{"product_id":"fusion-haut-parleurs-signature-3i-7-7-280w-audio-marine","title":"Signature Series 3i 7.7\" 280W speakers (pair)","description":"\u003cp\u003e\n    Designed for demanding marine environments, the FUSION Signature 3i Series 7.7-inch (010-02772-00) coaxial speakers deliver clear, immersive audio. Part of Garmin’s Signature 3i range, these speakers are optimized for integration with Fusion stereo and amplifier systems, featuring customizable DSP profiles via the Fusion-Link app. They serve as an intermediate size option in the series, positioned between the 6.5-inch models (230W max \/ 75W RMS) and the 8.8-inch models (330W max \/ 130W RMS), offering a balance between compactness and audio power.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and marine design\u003c\/h3\u003e\n\u003cp\u003e\n    These 7.7-inch speakers deliver a maximum power of 280 watts and an RMS power of 100 watts, with a nominal impedance of 4 ohms. Their frequency response ranges from 60 Hz to 22 kHz, ensuring detailed sound reproduction. Sensitivity is 91 dB (1W\/1m). The CURV® cone technology with rubber surround and silk dome tweeter contribute to sound clarity. For marine durability, the speakers are True-Marine certified and feature IP65 protection, shielding them from dust and low-pressure water jets. Their design includes water-resistant connectors for simplified installation and enhanced protection against salt corrosion.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The FUSION Signature 3i Series speakers are designed to operate within a temperature range of 0 to 50°C. The minimum mounting depth required is 86 mm (3 7\/16 in) and the mounting diameter is 156 mm (6 1\/8 in). The safe distance for the compass is 358 cm (141 in), minimizing electromagnetic interference with navigation instruments. The Signature 3i series also offers models with CRGBW LED lighting, though this specific model (010-02772-00) does not include it. The LED power supply voltage (for compatible models) is 10.8 to 16 Vdc with a maximum load current of 300 mA at 14.4 Vdc. These speakers comply with CE, WEEE, RoHS, and REACH certifications, meeting European environmental and safety standards. Audio connectivity is via Amphenol AT Series AT 2-way connectors.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53723837235540,"sku":"010-02772-00","price":290.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_13075425-7b9d-4dfc-acfc-a13ea6e35b1d.png?v=1780432281"},{"product_id":"fusion-module-dab-antenne-integree-ms-dab100a","title":"DAB module with integrated antenna","description":"\u003cp\u003e\n    Designed for digital radio reception at sea, the FUSION DAB module with integrated antenna (part number 010-01953-10) provides a complete solution for accessing DAB and DAB+ broadcasts on compatible marine audio systems. This module covers Band III frequencies (174 to 240 MHz) and supports transmission mode I, ensuring multi-region compatibility (EU, Norway, Switzerland, Australia, New Zealand). Its -97 dBm sensitivity ensures stable reception under various conditions. The module operates on an input voltage of 10.8 to 16 V DC and delivers an antenna output voltage of 8 to 15 V DC, with a maximum current of 50 mA.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and audio performance\u003c\/h3\u003e\n\u003cp\u003e\n    The FUSION MS-DAB100A module improves sound quality by eliminating background noise, hiss, crackling, and overlaps commonly associated with analog broadcasts. When connected to a compatible FUSION stereo system, it displays station information, program type, and DLS (Dynamic Label Segment) data directly on the screen, simplifying navigation. This module is compatible with a range of FUSION head units, including MS-UD650, MS-AV650, MS-UD750, MS-AV750, MS-RA70, MS-RA70N, MS-BB100, Apollo RA770, Apollo RA670, and MS-RA210. A software update may be required to enable the DAB source.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated antenna and marine robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The supplied antenna features a robust design with IEC 60529 IPX7 waterproof rating, while the module itself is rated IPX3 (when installed with connectors facing downward). The antenna has a 10-meter cable length and a 74 mm diameter base, with maximum dimensions (whip antenna and base) of 248 × 110 mm. It offers a typical LNA gain of 22 dB and a 50-ohm impedance. Antenna mounting options include a standard 1-inch mast mount or surface mounting via double-sided adhesive or threaded studs with wing nuts. The module weighs 103 g and the antenna 170 g (excluding cable). The safe distance from the compass is 5 cm, ensuring interference-free integration on marine dashboards.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723837366612,"sku":"010-01953-10","price":115.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_ae50ce9a-9ad8-47b9-8870-586e69b0be7d.png?v=1780432179"},{"product_id":"fusion-haut-parleurs-marins-fm-6-5-120w-blanc","title":"Pair of 6.5\" Round White FM Recessed Marine Speakers 120W","description":"\u003cp\u003e\n    Designed for demanding marine environments, the pair of flush-mount \u003cstrong\u003eFusion FM-F65RW\u003c\/strong\u003e 6.5-inch speakers delivers a peak power of 120 W. These round white speakers are optimized for discreet installation with an ultra-low mounting profile of just 2.5 mm, aligning with modern yacht design trends. They feature aluminum dome tweeters and a polypropylene cone with rubber surround, ensuring a frequency response from 100 Hz to 18 kHz and a nominal impedance of 4 Ohms.\n\u003c\/p\u003e\n\n\u003ch3\u003eTrue-Marine design and certified robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFusion FM-F65RW\u003c\/strong\u003e speakers benefit from Fusion’s True-Marine design philosophy, ensuring resistance to severe marine conditions such as salt fog, temperature variations, vibrations, and UV exposure. Their IP65 water and dust resistance rating confirms this robustness. Additionally, they comply with ISO12216 standards, having passed rigorous pressure and waterproofing tests, attesting to their manufacturing quality. The RMS nominal power is 30 W, with a sensitivity of 87 dB (1W\/1m).\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified installation and acoustic performance\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of these speakers is made easier by a non-intrusive mounting system that uses \"speaker feet,\" eliminating the need to drill additional screw holes in the vessel. The required mounting diameter is 138 mm with a depth of 70 mm. For optimal performance, an RMS amplifier power of 15 to 80 W per channel is recommended, and an optimal enclosure volume of 4 L is suggested. Compared to higher-end models in the same series, such as the FM-F77 (7.7 inches, 200W peak, 50W RMS), the FM-F65 is positioned as a more compact and discreet solution, ideal for areas where space is limited or minimal visual integration is desired, while still delivering Fusion audio quality.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723838382420,"sku":"010-02299-00","price":157.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e3b5b617-b0d4-44b0-9a9f-997afcc22b3b.jpg?v=1779962093"},{"product_id":"fusion-apollo-ra770-chaine-stereo-marine-wifi-tactile","title":"Marine stereo system Apollo RA770","description":"\u003cp\u003e\n    Designed for advanced marine audio integration, the \u003cstrong\u003eFusion Apollo RA770\u003c\/strong\u003e stereo system is an entertainment solution featuring a 4.3-inch optically bonded color LCD touchscreen with an intuitive touch interface. The system includes a Class D amplifier delivering up to 280 watts peak power, distributed across four channels at 43 watts RMS (at 2 ohms) or 26 watts RMS (at 4 ohms), and supports up to four independent audio zones for complete onboard sound customization.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Audio Network\u003c\/h3\u003e\n\u003cp\u003e\n    The RA770 stands out for its extensive connectivity. It is the first marine touchscreen stereo system to integrate Apple AirPlay 2, enabling high-quality audio streaming from Apple devices. Integrated Wi-Fi provides higher data transfer rates than Bluetooth for streaming and facilitates over-the-air (OTA) software updates via the Fusion-Link app. PartyBus™-Network technology allows audio synchronization across multiple Apollo systems in a network or individual control of each radio. NMEA 2000 connectivity is included for control via compatible multifunction displays and NRX remotes, along with an Ethernet port, a rear USB 2.0 port, two RCA inputs, an SPDIF optical audio input and outputs for the four audio zones, and an SPDIF optical audio input.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Marine Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFusion Apollo RA770\u003c\/strong\u003e features a True-Marine design with an IPX7-rated front panel for water resistance and protection against salt fog, temperature variations, vibrations, and UV damage. Its input voltage range of 10.8 to 16 VDC and 15 A mini-blade fuse ensure stable power supply. Fusion Digital Signal Processing (DSP) technology optimizes sound quality at all listening levels by creating custom audio profiles for each zone. Weighing 750 g, the unit operates within a temperature range of 0°C to 50°C.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723869217108,"sku":"010-01905-00","price":656.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f6a0922b-d07c-4ddc-aef4-0d6f41239912.webp?v=1780432160"},{"product_id":"fusion-chaine-stereo-marine-ra60","title":"Marine stereo system RA60","description":"\u003cp\u003eFusion® MS-RA60\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723869380948,"sku":"010-02405-00","price":237.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_b548d1a4-b9eb-4dce-a5bd-7bece3d45ecf.png?v=1780432240"},{"product_id":"fusion-haut-parleur-marin-fm-7-7-200w-blanc-ip65","title":"Marine speaker FM 7.7\" 200W white","description":"\u003cp\u003e\n    Designed for aesthetic integration and high-quality audio performance in a marine environment, the Fusion FM 7.7\" 200W white marine speaker combines a discreet design with quality acoustics. This model delivers 200 W peak power and 50 W RMS power, with a sensitivity of 91 dB (1 W\/1 m). Its frequency response ranges from 80 Hz to 18 kHz, and its nominal impedance is 4 Ohms, making it compatible with an amplifier power output recommended from 20 to 150 W per channel.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and materials for the marine environment\u003c\/h3\u003e\n\u003cp\u003e\n    The Fusion FM 7.7\" marine speaker is built with materials resistant to marine environments. It features an injection-molded polypropylene cone with a rubber surround for robust and clear audio reproduction, as well as an aluminum dome tweeter for a smooth high-frequency response. The overhung voice coil design reduces distortion and improves efficiency. The passive filter components are fully sealed, providing enhanced protection against marine elements. Certified True-Marine by Fusion, this speaker has IP65 protection against dust and water and meets industry standards for UV protection and salt spray resistance.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and positioning within the FM range\u003c\/h3\u003e\n\u003cp\u003e\n    This speaker stands out with its innovative flush-mount design, featuring a mounting profile not exceeding 2.5 mm, offering an almost flat finish. Its non-intrusive mounting system uses \"speaker feet\" that clamp against the panel, eliminating visible screws. Mounting dimensions are Ø 165 mm (6 1\/2 in) with a minimum depth of 83 mm (3 1\/4 in). Within Fusion’s FM range, the FM 7.7\" model positions itself as a versatile solution, offering higher power (200 W peak) compared to the FM-F65 (120 W peak) 6.5-inch model, while remaining a full-range speaker. This differentiates it from the FM-S10 subwoofer, which is specialized in low frequencies (30 Hz to 2 kHz) with 400 W peak power. The FM 7.7\" is suitable for installations requiring clear and powerful sound without the bulk of larger systems, with an operating temperature range of 0 to 50 °C.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":53723869774164,"sku":"010-02300-00","price":161.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d9539a93-7a6b-4366-9b78-4621de402e3a.png?v=1779962118"},{"product_id":"garmin-cache-protection-ra70-stereo-marin","title":"Dust cover for Fusion RA70 marine stereo","description":"\u003cp\u003e\n    The Garmin RA70 Series protective cover, part number 010-12466-01, is an essential accessory designed specifically for the Fusion MS-RA70 and MS-RA70N marine stereos. This protective element is made of durable silicone, providing an effective barrier against common marine environmental hazards such as dust, dirt, and moisture. Its purpose is to maintain the integrity of the device and extend its operational lifespan by preventing the infiltration of fine particles or saltwater spray.\n\u003c\/p\u003e\n\u003ch3\u003eTargeted protection and durability\u003c\/h3\u003e\n\u003cp\u003e\n    The silicone construction of the Garmin RA70 Series cover ensures adaptability and resistance to marine conditions. This material allows for easy installation and removal while ensuring a snug fit that does not compromise access to the front-panel controls once removed. Unlike generic protective solutions, this cover is specifically sized for the Fusion MS-RA70 and MS-RA70N models, ensuring optimized sealing at the stereo’s user interface.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    Using this cover is part of a preventive maintenance approach for onboard electronic equipment. It complements the inherent protection rating of the Fusion MS-RA70 and MS-RA70N stereos by adding an extra layer of defense against abrasive or corrosive elements present in the marine environment. It helps preserve the aesthetics and functionality of the buttons and screen, reducing the risk of premature wear or malfunctions due to direct exposure.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56009385607508,"sku":"010-12466-01","price":14.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_0fa0f0d8-f731-4eac-8f9f-a11953c1d353.jpg?v=1780437899"},{"product_id":"clarion-cmc-3-5mm-pnl-prise-jack-audio-encastrable","title":"CMC-3.5MM-PNL, 3.5 mm jack audio flush mount","description":"\u003cp\u003eThe \u003cstrong\u003eClarion CMC-3.5MM-PNL\u003c\/strong\u003e is a 3.5 mm flush-mount audio jack for adding a clean auxiliary input to a console, dashboard, or marine audio panel.\u003c\/p\u003e\n\u003ch3\u003eUsage\u003c\/h3\u003e\n\u003cp\u003eIt serves as an accessible connection point for an external audio source without leaving loose cables at the helm. This is a small integration accessory, useful when the audio system accepts a wired auxiliary input.\u003c\/p\u003e\n\u003ch3\u003eSkysat Advice\u003c\/h3\u003e\n\u003cp\u003eBefore drilling, verify exact compatibility with the car stereo or audio controller, rear access for tightening, and cable routing. Installation quality matters more than the jack itself: avoid shock-prone areas and protect the connection on the interior side.\u003c\/p\u003e","brand":"Clarion","offers":[{"title":"Default Title","offer_id":56009479520596,"sku":"010-13569-00","price":39.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/ImageServerAPI_48d435b3-9b86-4f17-9e44-7441e826e2c3.jpg?v=1781278520"},{"product_id":"garmin-cmc-usb1x-pnl-port-usb-encastrable-panneau","title":"CMC-USB1X-PNL, flush-mount USB port","description":"\u003cp\u003e\n    Designed for reliable USB connectivity in marine and vehicle environments, the flush-mount USB port \u003cstrong\u003eClarion CMC-USB1X-PNL\u003c\/strong\u003e provides a permanent and protected USB access point. This single port is compatible with USB 2.0 and 3.0 standards, ensuring high-speed data transfers for digital devices.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Protection\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eClarion CMC-USB1X-PNL\u003c\/strong\u003e features a rubber waterproof cap that protects the connection from water, dust, and dirt, ensuring long-term durability of the installation. The integrated 1.83-meter (6-foot) cable provides flexibility for connection to the source unit. Power for charging connected devices depends on the host unit.\n\u003c\/p\u003e\n\n\u003ch3\u003eSimplified Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the \u003cstrong\u003eClarion CMC-USB1X-PNL\u003c\/strong\u003e USB port is straightforward on a flat surface. A 19 mm (0.75-inch) cutout diameter is required, and the port can be mounted on panels up to 25.4 mm (1 inch) thick. It is secured with a plastic wing nut for stable fixation. Connectivity is via a 9-pin connection.\n\u003c\/p\u003e","brand":"Clarion","offers":[{"title":"Default Title","offer_id":56009484206420,"sku":"010-13576-00","price":32.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_7bf98b29-e88b-4cfa-a68d-40d023c1081c.jpg?v=1780440656"},{"product_id":"garmin-cmc-rc-y-cable-adaptateur-audio-clarion-marine","title":"CMC-RC-Y, Y-cable for marine remote control","description":"\u003cp\u003e\n    The Clarion Marine Audio CMC-RC-Y adapter cable is a 2-way Y-splitter designed to extend connectivity for their marine audio systems. Although listed under the Garmin designation, this cable is specifically engineered for seamless integration with Clarion equipment.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This adapter cable features a male plug and two female sockets, allowing simultaneous connection of two wired remote controls from the Clarion CMR series to a compatible Clarion CMM series marine receiver. It is compatible with Clarion remote controls CMR-10, CMR-20, and CMR-30, as well as Clarion marine receivers CMM-20, CMM-30, and CMM-30BB.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and specifications\u003c\/h3\u003e\n\u003cp\u003e\n    With a length of approximately 13.5 inches (about 34.3 cm), the CMC-RC-Y provides installation flexibility while maintaining a reliable connection. Its design is suited for marine environments, ensuring durability that meets the requirements of nautical applications. The manufacturer part number is MFR # 92811.\n\u003c\/p\u003e","brand":"Clarion","offers":[{"title":"Default Title","offer_id":56009484304724,"sku":"010-13753-00","price":23.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_8b813036-1e5e-4288-a6ce-404056719ca5.webp?v=1780440670"},{"product_id":"jl-audio-kit-montage-axia-vex-93707","title":"JL Audio\/Axia mounting kit for VeX speakers (93707)","description":"\u003cp\u003eThe \u003cstrong\u003eJL Audio \/ Axia 93707 mounting kit\u003c\/strong\u003e is a hardware set designed for VeX speakers and outdoor audio installations requiring robust mechanical mounting.\u003c\/p\u003e\n\u003ch3\u003eUse\u003c\/h3\u003e\n\u003cp\u003eThis kit allows speakers to be mounted on tubes, arches, or suitable structures based on the boat's configuration. The provided hardware ensures clean, stable, and vibration-resistant installation.\u003c\/p\u003e\n\u003ch3\u003eSkysat advice\u003c\/h3\u003e\n\u003cp\u003eCheck the exact tube diameter, speaker orientation, and cable access before ordering. On an outdoor audio installation, proper mounting prevents vibrations, protects wiring, and simplifies future removal.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56009484435796,"sku":"010-13874-00","price":161.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_11b1df5d-f46c-4d26-96ef-acf2c736234e.jpg?v=1780440685"},{"product_id":"lowrance-hds-video-adaptateur-cable-rca","title":"HDS Video cable adapter","description":"\u003cp\u003e\n    The Lowrance HDS video adapter cable (reference 000-11010-001) is designed to extend the capabilities of your HDS multifunction display by allowing it to display external video feeds. This adapter is essential for integrating various video sources directly into your navigation display.\n\u003c\/p\u003e\n\n\u003ch3\u003eVideo connectivity and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    With a length of approximately 0.6 meters (2 feet), this adapter cable is equipped with an RCA plug that accepts composite video signals. It provides extended compatibility with NTSC and PAL video systems, offering great flexibility for connecting different sources. It is compatible with a wide range of Lowrance HDS units, including HDS Gen2 Touch models (9\" and 12\"), HDS Gen3, HDS Carbon, and HDS Live.\n\u003c\/p\u003e\n\n\u003ch3\u003eApplications and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLowrance HDS video adapter cable\u003c\/strong\u003e allows you to connect rear cameras, underwater cameras, engine monitoring cameras, night vision cameras, or any other video source with a standard RCA output. This integration enhances situational awareness by providing flexible display options: full screen, split screen, or custom panel layouts on the HDS display. Installation is designed to be simple, with the cable connecting inline with the existing power cable of the HDS multifunction display.\n\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":56048769302868,"sku":"000-11010-001","price":94.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lowrance-hds-video-adaptateur-cable_000-11010-001-01.webp?v=1780907548"},{"product_id":"fusion-telecommande-audio-marine-nrx300-nmea2000-ipx7","title":"Fusion NRX300 BE marine audio remote control","description":"\u003cp\u003e\n    Designed for the marine environment, the \u003cstrong\u003eFusion NRX300 BE\u003c\/strong\u003e marine audio remote control provides versatile control of your entertainment system and the ability to display navigation data. It features a 2.6-inch monochrome LCD screen with optical bonding for high visibility in bright daylight and prevents fogging. The backlight brightness and contrast are adjustable to suit lighting conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    Certified NMEA 2000, the \u003cstrong\u003eFusion NRX300 BE\u003c\/strong\u003e integrates easily into existing networks via a \"plug-and-play\" installation. Its IPX7 waterproof rating ensures resistance to temporary immersion, making it suitable for installations on swim platforms, decks, or inside cabins. Control is via a rotary encoder and rubber keypad for intuitive use. It is powered by 10.8 to 16 Vdc and consumes 110 mA at 12 Vdc, with a NMEA 2000 Load Equivalency Number (LEN) of 3 (150 mA). It operates in a temperature range of 0 to 50°C and can be stored from -20 to 70°C.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features\u003c\/h3\u003e\n\u003cp\u003e\n    Beyond audio control, the \u003cstrong\u003eNRX300 BE remote\u003c\/strong\u003e functions as a NMEA 2000 repeater. It can display various network data, including wind direction and speed, depth, ground\/surface speed, heading, position, water temperature, and atmospheric pressure. It supports multi-zone technology for localized volume control across up to four independent audio zones, as well as global control of the audio source, depending on the connected Fusion system. Mounting options include flush installation for a clean aesthetic or standard dashboard mounting. The remote is compatible with Fusion marine stereos from the MS-UD, MS-AV, MS-RA, MS-BB, and MS-IP series, as well as partner multifunction displays via FUSION-Link. Its dimensions are 110 mm in length, 70 mm in width, and a front depth of 28 mm. The product is covered by a 3-year warranty.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073416638804,"sku":"010-01628-04","price":195.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_97a9124c-b8d4-48cc-a32c-5cc3bbffac15.jpg?v=1781108801"},{"product_id":"fusion-amplificateur-marin-ms-ap12000-monobloc-subwoofer","title":"Marine amplifier MS-AP12000","description":"\u003cp\u003e\n    The Fusion MS-AP12000 marine monoblock amplifier is designed for subwoofer-dedicated audio performance, integrating with the Fusion Apollo marine entertainment system. This Class D amplifier is specifically engineered to operate optimally with compatible Fusion DSP stereo systems and speakers, ensuring an optimized sound experience.\n\u003c\/p\u003e\n\u003ch3\u003eAudio Performance and System Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-AP12000 delivers a maximum output power of 2000 watts. It provides 650 watts RMS x 1 channel at 4 ohms and 1100 watts RMS x 1 channel at 2 ohms, compliant with CEA-2006 standards. Its Class D design ensures high energy efficiency, reducing the vessel’s battery consumption. Exclusive integration with compatible Fusion marine DSP stereo systems (such as Apollo RA770, RA670, WB670, and MS-RA210) and Fusion speakers\/subwoofers enables automatic audio parameter optimization via the Easy Tune function, managed by the Fusion-Link™ app.\n\u003c\/p\u003e\n\u003ch3\u003eMarine Design and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring Fusion True-Marine™ design, this amplifier is tested to withstand harsh marine environments, including salt spray, temperature variations, vibrations, and UV exposure. Its IPX2 rating indicates resistance to water spray. The printed circuit board (PCB) is coated with a conformal coating for enhanced protection against marine elements. The thermo-lacquered aluminum housing provides a durable finish. An ignition protection system is integrated, with a 125 A electronic fuse that protects against overcurrent, undervoltage, short circuits, and overheating without requiring replacement. An LED indicator provides visual feedback on electrical currents, short circuits, and temperature for quick diagnostics.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Installation is simplified with an included mounting bracket for quick attachment\/detachment or surface mounting with countersunk screws. The unit must be installed in a dry, well-ventilated location, protected from extreme temperatures, fuel, and vapors. Physical dimensions (without bracket) are 235 x 180 x 45 mm (9.25\" x 7.06\" x 1.75\") with a weight of 2.2 kg (4.85 lb). It operates on a voltage range of 10.8 V to 16 V DC and within a temperature range of 0° to 50° C (32° to 122° F). Standby power consumption is less than 5 mA at 14.4 V, with a maximum consumption of 87 A.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073418670420,"sku":"010-02284-15","price":509.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_17af6264-cc41-4098-892a-fcfef9b70309.jpg?v=1781108824"},{"product_id":"fusion-amplificateur-marin-ms-ap41200-4-canaux-classe-d","title":"Marine amplifier Fusion MS-AP41200","description":"\u003cp\u003e\n    The \u003cstrong\u003eFusion MS-AP41200 marine amplifier\u003c\/strong\u003e is designed for marine audio systems requiring power and sound fidelity. This 4-channel amplifier delivers 150 watts RMS per channel at 4 ohms or 290 watts RMS per channel at 2 ohms (at 14.4V and \u0026lt;1% THD+N). It can be bridged into a 2-channel configuration to provide up to 580 watts RMS per channel at 4 ohms, particularly for powering a subwoofer. Its peak power reaches 1200 watts.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring a Class-D architecture, the MS-AP41200 offers high efficiency, minimizing current draw (less than 5 mA in standby, less than 1.15 A with no audio, up to 53 A max in operation) and extending battery life. It operates on a 10.8 to 16 V DC supply and includes an 85 A electronic fuse, eliminating the need for replacement. Input impedance is 22k ohms, with an input sensitivity of 1.3 V RMS.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and smart features\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier is specifically designed for use with compatible Fusion DSP marine audio systems, such as Apollo RA670, RA770, WB670, and MS-RA210 stereos, as well as Fusion marine speakers. It is not compatible with third-party audio systems. The \"Easy Tune\" feature enables automatic audio parameter adjustment via the Fusion-Link™ app for optimized sound quality without manual intervention. The absence of built-in manual controls centralizes all settings through the app. LED indicators provide visual feedback on electrical currents, short circuits, and temperature, simplifying troubleshooting.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine robustness and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-AP41200 is built with True-Marine™ design, ensuring resistance to harsh marine environments. Its chassis is rated IPX2, providing protection against water droplets. The PCB features conformal coating for enhanced protection against marine elements. The powder-coated aluminum finish is tested against salt spray, temperature variations, vibrations, and UV exposure. Integrated protection circuits prevent overheating, reverse polarity, over\/under-voltage, and short circuits, with ignition protection (SAE J1171). It operates within a temperature range of 0° to 50° C. Dimensions are 235 x 180 x 45 mm (without bracket) and 235 x 180 x 50 mm (with bracket), weighing 2.2 kg. The safe distance for compasses is 75 cm. Installation is simplified with an included mounting bracket and proprietary cable connectors. The product is covered by a 3-year limited warranty.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073421029716,"sku":"010-02284-45","price":499.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_fc3d7532-577e-4251-86e3-153ef6044ca9.jpg?v=1781108844"},{"product_id":"fusion-amplificateur-marin-ms-ap61800-6-canaux-1800w","title":"Marine amplifier MS-AP61800","description":"\u003cp\u003e\n    Designed for Fusion marine audio systems compatible with DSP, the \u003cstrong\u003eFusion MS-AP61800\u003c\/strong\u003e marine amplifier is a dedicated amplification solution. It is specifically optimized for use with Fusion marine stereo players featuring DSP technology, such as the Apollo RA770, RA670, WB670, and MS-RA210 models, as well as with Fusion speakers.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and efficiency\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFusion MS-AP61800\u003c\/strong\u003e is a 6-channel amplifier with a peak power of 1800 watts. It delivers 150 watts RMS per channel at 4 ohms and 290 watts RMS per channel at 2 ohms. In bridged mode, it reaches 580 watts RMS on 3 channels at 4 ohms. Its Class D design ensures energy efficiency, allowing extended listening times with reduced battery consumption. The amplifier maintains low total harmonic distortion, contributing to clear audio reproduction. The Easy Tune function enables automatic audio parameter adjustment via the Fusion-Link™ app for optimized sound quality without manual adjustments.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and protection\u003c\/h3\u003e\n\u003cp\u003e\n    This amplifier is designed for the marine environment with IPX2 protection. The printed circuit boards feature conformal coating for enhanced protection against marine elements. Its thermo-lacquered aluminum chassis has been tested for resistance to salt spray, temperature variations, vibrations, and UV, in line with the True-Marine™ design. LED indicators are integrated to signal electrical issues, short circuits, and overheating. The device is spark-proof and includes a 125 A electronic fuse to prevent damage from overcurrent, undercurrent, excessive temperatures, and output short circuits. It operates at 10.8 V to 16 V DC and comes with a 3-year warranty.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFusion MS-AP61800\u003c\/strong\u003e offers two mounting options: either via an included bracket for quick attachment\/detachment, or directly onto the mounting surface using countersunk screws for tight spaces. It comes with proprietary cable connectors to simplify wiring and high-power mode adapters to facilitate channel bridging. The unit weighs 2.7 kg (5.95 lbs) and measures 297 x 180 x 45 mm (without bracket) or 297 x 180 x 50 mm (with bracket).\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073422668116,"sku":"010-02284-65","price":619.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_2286e883-5363-4d43-9187-9eb3b53fae73.jpg?v=1781108868"},{"product_id":"fusion-amplificateur-marin-ms-ap82400-8-canaux-classe-d","title":"Marine amplifier MS-AP82400","description":"\u003cp\u003e\n    The \u003cstrong\u003eFusion MS-AP82400\u003c\/strong\u003e marine amplifier is designed to deliver high-quality audio in demanding marine environments. This 8-channel amplifier, with a peak power of 2400 watts, is optimized for Fusion DSP-compatible marine audio systems and Fusion speakers.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and efficiency\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-AP82400 delivers 150 watts RMS per channel across 8 channels at 4 ohms (14.4V, \u003c1% THD), or 290 watts RMS per channel at 2 ohms. In bridged mode, it provides 580 watts RMS across 4 channels at 4 ohms. Its Class-D design ensures high energy efficiency, reducing current draw and enabling extended listening sessions. It can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. The amplifier features electronic protection with a 125 A fuse, requiring no replacement, and operates on a 10.8 V to 16 V DC supply.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with True-Marine™ design, this amplifier is tested to withstand salt spray, temperature variations, vibrations, and UV exposure. Its IPX2 rating protects against water droplets. The printed circuits are coated with conformal coating for added protection, and the thermo-lacquered aluminum finish ensures durability and modern aesthetics. The Easy Tune feature, accessible via the Fusion-Link™ app with a compatible Fusion DSP stereo system, automatically adjusts audio settings for optimal sound quality. The amplifier is specifically designed for exclusive use with Fusion DSP-compatible stereo systems (such as Apollo RA770, RA670, WB670, and MS-RA210) and Fusion speakers, ensuring seamless integration and performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and safety\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-AP82400 is designed for easy installation with proprietary cable connectors and an included mounting bracket, allowing for quick or direct mounting. LED indicators enable rapid identification of electrical issues, short circuits, and temperature alerts. Built-in intelligent protection circuits safeguard the unit against overcurrent, undervoltage, output short circuits, and other faults. The unit weighs 3.15 kg. Its dimensions without the bracket are 359 x 180 x 45 mm (L x W x H) and with the bracket 359 x 180 x 50 mm (L x W x H).\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073425158484,"sku":"010-02284-85","price":733.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_7b9cb9e2-8953-4a76-ab11-b07385e79f47.jpg?v=1781108889"},{"product_id":"fusion-sg-tw101spb-tweeter-marin-audio","title":"Fusion SG-TW101SPB marine tweeter","description":"\u003cp\u003e\n    Designed to enhance the marine audio experience, the \u003cstrong\u003eFusion SG-TW101SPB marine tweeter\u003c\/strong\u003e is a dedicated solution for high frequencies. It is specifically integrated with Fusion Signature Series audio systems, optimizing sound clarity in marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and acoustic performance\u003c\/h3\u003e\n\u003cp\u003e\n    The SG-TW101SPB tweeter delivers 60 W RMS and a maximum power of 330 W, with an efficiency of 91 dB (1 W\/1 m). Its frequency response ranges from 3 kHz to 20 kHz, and its nominal impedance is 4 Ohms. When connected to a Fusion Signature Series speaker, the combined impedance is 2 Ohms. The rigid aluminum dome diaphragm ensures precise high-frequency reproduction. A recommended RMS amplifier power of 25 to 140 W per channel ensures broad compatibility with marine amplifiers.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobustness and marine integration\u003c\/h3\u003e\n\u003cp\u003e\n    Certified True-Marine™, this tweeter is designed to withstand marine conditions. It is IP65 rated, providing protection against dust and water jets. Its minimum mounting depth is 31 mm, and its cutout diameter is 51 mm, allowing for discreet installation. The front diameter is 74 mm, and the total depth is 41.6 mm. The safe distance from a compass is 110 cm. It operates within a temperature range of 0 to 50°C. Connections are made via a 2-pin Amphenol AT Series connector, ensuring a watertight and reliable link. A 2 m cable is included with each tweeter for easy connection.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and system configuration\u003c\/h3\u003e\n\u003cp\u003e\n    The SG-TW101SPB tweeter is compatible with Fusion Signature Series speakers and compatible DSP stereo systems, including the Apollo series, capable of handling 2 Ohms impedance per channel. It features an internal passive filter, eliminating the need for an external crossover module. DSP profile configuration on the stereo system is required to optimize its performance and ensure balanced sound reproduction.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073426534740,"sku":"010-02796-30","price":102.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_57461f8c-576e-46c7-8937-6d43c612ebc8.jpg?v=1781108910"},{"product_id":"fusion-haut-parleurs-marins-encastrables-ap-fl65spw-led-6-5-pouces","title":"Fusion AP-FL65SPW flush-mount marine loudspeakers","description":"\u003cp\u003e\n    Designed to deliver an immersive audio experience at sea, the \u003cstrong\u003eFusion AP-FL65SPW\u003c\/strong\u003e flush-mount marine loudspeakers incorporate technical features for nautical environments. These 6.5-inch coaxial speakers are equipped with CRGBW LED lighting, allowing customization of the onboard lighting ambiance with five distinct colors (cold white, red, green, blue, warm white).\n\u003c\/p\u003e\n\u003ch3\u003eDesign and audio performance\u003c\/h3\u003e\n\u003cp\u003e\n    The AP-FL65SPW loudspeakers feature CURV® cone technology with a rubber surround, ensuring clear audio reproduction and robustness suited for marine use. The 25 mm (1-inch) silk dome tweeter contributes to precise high-frequency output. With a peak power of 300 W and a continuous power (RMS) of 75 W, they are designed to deliver high-quality sound with a sensitivity of 90 dB (SPL at 1 W\/1 m) and a frequency response from 70 Hz to 22 kHz. The nominal impedance is 4 Ω, with a recommended amplifier power of 25 to 150 W per channel.\n\u003c\/p\u003e\n\u003ch3\u003eMarine durability and installation\u003c\/h3\u003e\n\u003cp\u003e\n    These loudspeakers are built with a marine-grade design, certified IP66\/IP67 for protection against dust and temporary immersion. They are tested to ISO 12216 standards for resistance to pressure, water ingress, salt spray, temperature variations, vibrations, and UV, ensuring reliable operation in demanding marine conditions. The integrated connectors are water-resistant to simplify installation and meet ABYC requirements. Installation is made easier with tool-free interchangeable grilles and concealed mounting holes for a clean finish. Physical dimensions are 176 mm (6.93\") in diameter by 103.1 mm (4.06\") in depth, with a mounting diameter of 136 mm (5.35\") and a mounting depth of 77 mm (3.03\").\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced features and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The LED lighting of the \u003cstrong\u003eFusion AP-FL65SPW\u003c\/strong\u003e loudspeakers operates on a supply voltage of 10.8 to 16 VDC, with a maximum LED current draw of 130 mA per color and per loudspeaker. Compatibility with Garmin Spectra™ technology allows for color combinations and optimized power consumption. These loudspeakers are optimized for use with Fusion car stereos and amplifiers (sold separately) to ensure a consistent system integration.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073428238676,"sku":"010-02918-01","price":388.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_67aecc49-5410-4a0c-8eaa-6d2936b9ccc8.jpg?v=1781108930"},{"product_id":"fusion-haut-parleurs-marins-encastrables-ap-fl65spg-led-6-5-pouces","title":"Fusion AP-FL65SPG flush-mount marine speakers","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eFusion AP-FL65SPG flush-mount marine speakers\u003c\/strong\u003e are 2-way coaxial 6.5\" speakers (with a physical diameter of 176 mm) delivering accurate audio reproduction. Each speaker delivers 75 watts RMS (150 watts per pair) and 300 watts peak power (600 watts per pair), with a 4-ohm impedance and 90 dB sensitivity (1 watt at 1 meter). Their frequency response ranges from 70 Hz to 22 kHz, ensuring extended sound coverage.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine-grade design and integrated technologies\u003c\/h3\u003e\n\u003cp\u003e\n    These speakers feature a 1\" silk dome tweeter and a CURV® woven fiber woofer cone with rubber surround, materials selected for durability and audio performance. The chassis is specially designed to withstand marine conditions, having undergone rigorous UV stability and salt fog resistance tests. The IP66\/IP67 certification, compliant with ISO12216 standards, ensures protection against water and dust.\n\u003c\/p\u003e\n\n\u003ch3\u003eCRGBW LED lighting and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAP-FL65SPG\u003c\/strong\u003e speakers are equipped with integrated CRGBW LED lighting, offering Cold White, Red, Green, Blue, and Warm White color options, customizable via their distinct hexagonal tweeters. This feature allows for creating ambient lighting onboard. For installation, they require a cutout diameter of 136 mm (5.35 inches) and a mounting depth of 77 mm (3.03 inches). Connections are facilitated by sealed Deutsch connectors: 2 wires for audio and 6 wires for lighting, compliant with ABYC requirements. Compatibility with Garmin Spectra™ is possible for advanced color combinations, optimizing power consumption.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073429582164,"sku":"010-02918-03","price":394.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_ecc0c4ff-1f44-4067-921a-dd7a00b04c4e.jpg?v=1781108949"},{"product_id":"fusion-haut-parleurs-marins-encastrables-ap-fl77spw-7-7-pouces-led","title":"Fusion 7.7\" flush-mount marine speakers AP-FL77SPW","description":"\u003cp\u003e\n    Designed for marine environments, the \u003cstrong\u003eFusion AP-FL77SPW 7.7\" flush-mount marine speakers\u003c\/strong\u003e deliver high-fidelity audio. These 2-way coaxial speakers feature advanced capabilities for an immersive sound experience on the water.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and audio performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAP-FL77SPW\u003c\/strong\u003e speakers have a 7.7\" diameter and a 2-way coaxial configuration. They handle a peak power of 400 Watts and an RMS power of 100 Watts, with a sensitivity of 91 dB (1W\/1M). Their frequency response ranges from 60 Hz to 22 kHz, with a nominal impedance of 4 ohms. The tweeter is a 1\" silk dome model. The CURV® cone technology uses a woven fiber composite, heat-pressed for a lightweight and rigid cone, improving sound definition and resistance to marine conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine integration and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    These speakers feature a CRGBW LED lighting system (cool white, red, green, blue, warm white) for customizable ambient lighting. Their design is marine-grade, with resistance tested against UV, salt spray, dust, and temperature variations. They meet IP66\/IP67 ratings, ensuring protection against dust and powerful water jets. Installation is simplified with integrated, waterproof Deutsch connectors of the \"plug-and-play\" type. Physical dimensions are approximately 196 x 113.2 mm (diameter x depth), with a mounting diameter of 156 mm and a mounting depth of 86 mm. The speakers are optimized for stereo systems and Fusion amplifiers (sold separately) via customizable DSP profiles, configurable with the Fusion-Link™ app. A 3-year warranty is included.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073431286100,"sku":"010-02918-11","price":449.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_d8eea584-7442-4930-8c2e-af3a723160b7.jpg?v=1781108968"},{"product_id":"fusion-haut-parleurs-marins-encastrables-ap-fl77spg-led-7-7-pouces","title":"Fusion AP-FL77SPG flush-mount marine speakers","description":"\u003cp\u003e\n    Designed for the marine environment, the \u003cstrong\u003eFusion AP-FL77SPG\u003c\/strong\u003e flush-mount speakers from the Apollo series are 7.7-inch coaxial speakers with gray Sport edition grilles, featuring CRGBW LED lighting. These speakers are specifically engineered to deliver high-fidelity audio reproduction even in demanding marine conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and design\u003c\/h3\u003e\n\u003cp\u003e\n    The AP-FL77SPG speakers deliver a peak power of 400 W and an RMS power of 100 W. Their sensitivity is 91 dB (1 watt @ 1 meter) and their frequency response ranges from 60 Hz to 22 kHz. The nominal impedance is 4 ohms. For optimal performance, Fusion recommends an amplifier power output of 30 to 200 W per RMS channel. The transducer uses a 1.4-inch voice coil and a CURV® cone with rubber surround, paired with a 1-inch silk dome tweeter. The motor design has been optimized to reduce distortion and improve sound clarity at high volumes.\n\u003c\/p\u003e\n\n\u003ch3\u003eLED lighting and customization\u003c\/h3\u003e\n\u003cp\u003e\n    These speakers feature CRGBW (cold white, red, green, blue, warm white) LED rings for color customization to match the onboard ambiance. The distinctive hexagonal tweeters enhance the visual aesthetics. The grilles are interchangeable and supplied in gray Sport edition finish, with additional options (white or shielded) available separately for easy no-screw customization.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine durability and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFusion AP-FL77SPG\u003c\/strong\u003e speakers are built to withstand harsh marine environments, with IP66\/IP67 ratings for dust and water protection, and compliance with ISO12216 standards for pressure and sealing. They are resistant to dust, salt spray, temperature variations, vibrations, and UV rays. The connectors are marine-grade, waterproof \"plug-and-play\" type, compliant with ABYC standards to simplify installation and enhance protection. Physical dimensions are 196 x 113.2 mm (diameter x depth), with a mounting diameter of 156 mm and a mounting depth of 86 mm. The safe distance from the compass is 300 cm.","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073434071380,"sku":"010-02918-13","price":448.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_80db3bdd-c662-428b-89aa-e9a675212fc2.jpg?v=1781108988"},{"product_id":"fusion-enceintes-marines-ap-fl88spw-8-8-led","title":"Fusion AP-FL88SPW flush-mount marine speakers","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eFusion AP-FL88SPW\u003c\/strong\u003e flush-mount speakers from the Apollo series provide a high-fidelity marine audio solution. These 8.8-inch 2-way coaxial speakers are supplied in pairs and feature advanced technical features for an immersive onboard sound experience.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio Performance and Marine Durability\u003c\/h3\u003e\n\u003cp\u003e\n    Each \u003cstrong\u003eAP-FL88SPW\u003c\/strong\u003e speaker delivers an RMS power of 130 watts (260 watts per pair) and a peak power of 520 watts (1040 watts per pair), with a sensitivity of 91 dB. The frequency response ranges from 50 Hz to 22,000 Hz, ensuring detailed sound reproduction across a wide range. The 4-ohm impedance ensures compatibility with various marine amplifiers. They feature a 1.25-inch (1-1\/4\") silk dome tweeter with an anodized mesh cover and a woven CURV® composite cone woofer with a rubber surround, designed for audio clarity and resistance to the elements.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Lighting Aesthetics\u003c\/h3\u003e\n\u003cp\u003e\n    These speakers are certified to IP66\/IP67 marine standards, compliant with ISO12216, ensuring resistance to water, weather, UV rays, and salt spray. They feature a customizable CRGBW LED lighting system (cool white, red, green, blue, warm white) offering a wide color palette to match the desired onboard ambiance. Interchangeable grilles, available in sport white and sport gray, allow the speakers to blend seamlessly with the boat’s aesthetics. Water-resistant marine-grade connectors simplify installation and meet ABYC requirements. An integrated tweeter protection system ensures system longevity.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and System Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Installation requires a flush-mount depth of 105 mm (4.13 inches) and a cutout dimension of 180 mm (7.09 inches). The \u003cstrong\u003eFusion AP-FL88SPW\u003c\/strong\u003e speakers can be integrated into Fusion stereo systems and amplifiers for optimized performance and are controllable via a compatible Garmin connected watch or a smartphone using the Fusion Audio app. The pair weighs 6.40 kg (14.11 lbs). A 3-year warranty is provided for these speakers.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073435971924,"sku":"010-02918-21","price":511.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_81268079-2c13-46d4-9f83-57617c4f16ce.jpg?v=1781109007"},{"product_id":"fusion-haut-parleurs-marins-encastrables-ap-fl88spg","title":"Fusion AP-FL88SPG Flush-Mount Marine Speakers","description":"\u003cp\u003e\n    The Fusion AP-FL88SPG flush-mount marine speakers from the Apollo series are designed to deliver high-fidelity audio in marine environments. These 8.8-inch coaxial speakers feature a 1.25-inch (31.75 mm) hexagonal silk dome tweeter and a CURV® woofer cone with rubber surround, ensuring clear and durable sound reproduction.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio Performance and Marine Durability\u003c\/h3\u003e\n\u003cp\u003e\n    Each Fusion AP-FL88SPG speaker delivers a peak power of 520 watts and an RMS power of 130 watts, with a frequency response from 50 Hz to 20 kHz and a sensitivity of 91 dB (1 watt at 1 meter). The nominal impedance is 4 ohms. The design is marine-rated to withstand harsh conditions, certified to IP66\/IP67 for water and dust resistance, compliant with ISO 12216 standards. The speakers feature 1.5-inch (38.1 mm) voice coils and an optimized motor design to reduce distortion.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated CRGBW LED Lighting and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The AP-FL88SPG model includes dual-tone CRGBW (cold white, red, green, blue, warm white) LED lighting rings with five preset colors for customizable ambiance. The LED power supply requires 10.8 to 16 VDC. For installation, the mounting diameter is 7.09 inches (180 mm) and the mounting depth is 4.13 inches (105 mm). The total physical dimensions are 8.82 inches in diameter and 5.28 inches in depth (224 x 134.1 mm). The Sports Gray grilles are tool-free and interchangeable. Connections are facilitated by a 5.9-inch (150 mm) waterproof 2-pin speaker connector and a 5.9-inch (150 mm) waterproof 6-pin LED connector.\n\u003c\/p\u003e\n\u003cp\u003e\n    Compatibility with Garmin Spectra™ allows for custom color combinations using the equivalent of two CRGBW LED channels, reducing power consumption and increasing the number of controllable devices. The product comes with a 3-year warranty.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073438200148,"sku":"010-02918-23","price":506.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_0271eeff-4180-49f9-ac5d-f82f22dee379.jpg?v=1781109030"},{"product_id":"fusion-subwoofer-marin-ap-sl10spw-10-pouces-led","title":"Marine subwoofer AP-SL10SPW","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eFusion Apollo™ marine subwoofer AP-SL10SPW\u003c\/strong\u003e features a 10-inch driver delivering continuous power of 300 W RMS and peak power of 600 W. The subwoofer has a polypropylene cone and rubber surround for consistent bass response and enhanced durability against marine elements.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio Performance and Marine Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFusion AP-SL10SPW subwoofer\u003c\/strong\u003e incorporates improved motor designs to reduce distortion, providing immersive, high-fidelity bass even at high volumes. Its construction meets marine standards with IP66\/IP67 water and dust resistance certification, and compliance with ISO 12216 for UV stability and salt fog resistance. The frequency response ranges from 30 Hz to 2 kHz, with a sensitivity of 86 dB (1 watt at 1 meter) and a nominal impedance of 4 ohms.\n\u003c\/p\u003e\n\n\u003ch3\u003eCustomizable LED Lighting and Simplified Installation\u003c\/h3\u003e\n\u003cp\u003e\n    This subwoofer features customizable CRGBW LED lighting (cold white, red, green, blue, warm white) with a dual-tone palette of 5 standard colors. The LED power supply is compatible with 10.8 to 16 VDC. For easy installation compliant with ABYC standards, the product includes waterproof marine-grade connectors. Mounting diameter is 223 mm (8.78 inches) and mounting depth is 135 mm (5.31 inches), with a total physical diameter of 275 mm (10.83 inches) and depth of 175.8 mm (6.92 inches). The subwoofer ships with a white sport grille. Interchangeable grilles (white sport or gray sport) are available to customize the boat’s aesthetics, and it weighs 6.1 kg (13.4 lbs). It operates within a temperature range of 0° to 50° C (32° to 122° F) and comes with a 3-year warranty.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56073439248724,"sku":"010-02918-41","price":345.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_e8402276-c81d-4eb0-8af4-d281d77debbe.jpg?v=1781109050"},{"product_id":"fusion-subwoofer-marin-ap-sl10spg-10-pouces-led","title":"Marine subwoofer AP-SL10SPG","description":"\u003cp\u003e\n    The \u003cstrong\u003eFusion AP-SL10SPG\u003c\/strong\u003e 10-inch marine subwoofer, with its gray Sport edition grille, is designed to deliver deep, clear bass in a marine environment. It features a peak power of 600 W and an RMS power of 300 W, ensuring an immersive sound experience even at high volumes thanks to its optimized motor designs that reduce distortion.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and acoustic performance\u003c\/h3\u003e\n\u003cp\u003e\n    This subwoofer offers a sensitivity of 86 dB (1 watt @ 1 meter) and a frequency response from 30 Hz to 2 kHz. Its nominal impedance is 4 ohms, and it is recommended to pair it with an amplifier with an RMS power between 50 and 300 W. The polypropylene cone with rubber surround and 2-inch voice coil contribute to accurate reproduction of low frequencies.\n\u003c\/p\u003e\n\u003ch3\u003eDurability and integrated lighting\u003c\/h3\u003e\n\u003cp\u003e\n    With an IP66\/IP67 waterproof rating, the \u003cstrong\u003eFusion AP-SL10SPG\u003c\/strong\u003e is built to withstand marine conditions. It features integrated CRGBW LED lighting (5 colors) with a supply voltage of 10.8 to 16 VDC. The bicolor LED rings allow visual customization, and use with Garmin Spectra™ extends color combinations while optimizing power consumption. Its physical dimensions are 275 mm in diameter and 175.8 mm in depth, with a mounting diameter of 223 mm and a mounting depth of 135 mm. It operates in a temperature range of 0°C to 50°C and comes with a 3-year warranty.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and customization\u003c\/h3\u003e\n\u003cp\u003e\n    The subwoofer ships with a gray Sport edition grille and offers interchangeable white Sport grilles available separately for aesthetic customization. The grille installation is tool-free. The \u003cstrong\u003eAP-SL10SPG\u003c\/strong\u003e is designed to integrate with Fusion Apollo™ speakers to create a complete and coherent marine audio system.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56076380864852,"sku":"010-02918-43","price":345.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_225f30d1-44c9-443a-a958-552cb499181f.jpg?v=1781126762"},{"product_id":"fusion-subwoofer-marin-ap-sl12spw-12-pouces-led","title":"Marine subwoofer AP-SL12SPW","description":"\u003cp\u003eDesigned for an immersive sound experience in marine environments, the \u003cstrong\u003eFusion marine subwoofer AP-SL12SPW\u003c\/strong\u003e with a 12-inch driver is part of the Apollo series and is optimized to deliver deep, impactful bass. It combines high audio power with durability suited to demanding marine environments.\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and marine durability\u003c\/h3\u003e\n\u003cp\u003eThis subwoofer delivers a peak power of 1400 W and an RMS power of 700 W, ensuring accurate reproduction of low frequencies. Its sensitivity is 86 dB (1 watt @ 1 meter) and its frequency response ranges from 20 Hz to 2 kHz, with a nominal impedance of 4 ohms. To ensure longevity at sea, the \u003cstrong\u003eFusion AP-SL12SPW\u003c\/strong\u003e is certified IP66\/IP67 for water and dust resistance. It is also designed to withstand UV rays, salt, and mist, with an operating temperature range of 0° to 50° C (32° to 122° F). The safe distance from a compass is 580 cm (19.03 ft).\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced design and integration\u003c\/h3\u003e\n\u003cp\u003eThe subwoofer features a polypropylene cone and a Santoprene rubber surround, incorporating CURV technology for a structure that is both lightweight and robust. Its physical diameter is 356 mm (14.02 in) and its depth is 248.2 mm (9.77 in), with a mounting diameter of 301 mm (11.85 in) and a mounting depth of 198 mm (7.80 in). An updated motor reduces distortion, contributing to premium sound quality. The \u003cstrong\u003eAP-SL12SPW\u003c\/strong\u003e also integrates customizable CRGBW LED lighting with a supply voltage of 10.8 to 16 VDC, allowing for various lighting ambiances, including color combinations via Garmin Spectra. The marine-grade connectors are water-resistant and compliant with ABYC requirements, simplifying installation. Two interchangeable sports-style grilles (white and gray) are included to match your boat's aesthetics. A 3-year warranty accompanies this product.\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56076382994772,"sku":"010-02918-51","price":750.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_5ca0f2a6-b686-423b-b891-a0beb8e4cf75.jpg?v=1781126782"},{"product_id":"fusion-subwoofer-marin-ap-sl12spg-12-pouces-led","title":"Marine subwoofer AP-SL12SPG","description":"\u003cp\u003e\n    The \u003cstrong\u003eFusion Apollo™ marine subwoofer AP-SL12SPG\u003c\/strong\u003e is designed to reproduce low frequencies in marine environments. This 12-inch subwoofer delivers a peak power of 1400 watts and an RMS power of 700 watts. Its sensitivity is 86 dB (1 watt @ 1 meter) and its frequency response ranges from 20 Hz to 2 kHz, with a nominal impedance of 4 ohms.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and audio performance\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring a polypropylene cone and a robust rubber surround, the \u003cstrong\u003eAP-SL12SPG\u003c\/strong\u003e is engineered for precise audio clarity and enhanced durability. Its motor has been updated to reduce distortion, enabling immersive bass reproduction even at high volumes. The voice coil diameter is 4 inches. For optimal performance, an RMS amplifier power of 200 to 700 W is recommended.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and marine-grade resistance\u003c\/h3\u003e\n\u003cp\u003e\n    This marine subwoofer is equipped with dual-tone LED lighting rings (CRGBW), offering a wide color palette to match the ambiance. It is compatible with Garmin Spectra™ technology for color customization and optimized power consumption management. The \u003cstrong\u003eFusion Apollo™ marine subwoofer AP-SL12SPG\u003c\/strong\u003e is built to withstand harsh marine conditions, with IP66\/IP67 certification for water and dust resistance, as well as UV stability and salt fog resistance. Its physical dimensions are 356 mm in diameter by 248.2 mm in depth, with a mounting diameter of 301 mm and a mounting depth of 198 mm. The product includes a gray Sport edition grille. The LED power supply voltage is 10.8 to 16 VDC, and its operating temperature range is 0° to 50° C. A compass safety distance of 580 cm must be observed. It includes water-resistant 2-way connectors for audio and 6-way connectors for LED lighting.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56076386828628,"sku":"010-02918-53","price":738.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_0b994ff8-3fdf-4b2b-827f-a77a3aed4e42.jpg?v=1781126800"},{"product_id":"fusion-apollo-ms-ra800-source-stereo-marine","title":"Fusion Apollo™ MS-RA800 Marine Stereo Source","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eFusion Apollo™ MS-RA800\u003c\/strong\u003e marine stereo source offers an advanced audio system with robust performance and high-quality sound reproduction. This system features a 4.3-inch (109 mm) capacitive touchscreen with 800 x 480 resolution, optimized with optical bonding for improved readability in full sunlight, high image resolution, and enhanced color saturation.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio Performance and Power\u003c\/h3\u003e\n\u003cp\u003e\n    The MS-RA800 is equipped with a Class D internal amplifier delivering 4 x 40 watts RMS at 4 ohms, with total harmonic distortion below 0.1%. It provides 50% more output power than its predecessor, the RA770. Support for lossless high-resolution audio up to 24 bits at 96 kHz is included, complemented by an integrated digital signal processor (DSP) for customizable audio profiles via the Fusion-Link™ app.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This marine stereo system offers extensive connectivity including built-in Wi-Fi for Apple AirPlay® audio streaming, Bluetooth®, AM\/FM radio, two RCA stereo AUX inputs, a rear USB-C port, an HDMI ARC port, an Ethernet port, and an NMEA 2000® port. It also integrates ANT® wireless technology and supports software updates via Wi-Fi or USB. The MS-RA800 enables multi-zone control with four audio zones and the PartyBus™ feature for synchronization or control of multiple Apollo units on the same network. It is compatible with Garmin multifunction displays (MFD) via NMEA 2000® or the Garmin BlueNet network, and can be controlled via compatible Garmin smartwatches. Its digital processor is 8 times faster than that of the RA770, ensuring rapid response times.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Design and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Adhering to the True-Marine™ design philosophy, the MS-RA800’s front panel is rated IPX6 and IPX7, providing protection against salt fog, temperature variations, vibrations, and UV exposure. The rear chassis is rated IPX3. Its dimensions are 82 mm (height) x 192 mm (width) x 119.4 mm (depth) with a weight of 620 g. The unit is powered by a 10.8 – 32 VDC input and has a maximum current consumption of 25 A at 14.4 V. Its form factor and size are identical to those of the RA770, facilitating easy replacement or upgrade. The product is covered by a 3-year warranty.\n\u003c\/p\u003e","brand":"Fusion","offers":[{"title":"Default Title","offer_id":56076390957396,"sku":"010-02937-01","price":774.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_72fedbbb-0dfd-43b7-8a9d-845e2f42ba88.jpg?v=1781126819"},{"product_id":"clarion-haut-parleurs-marins-encastrables-cms-651-swb","title":"CMS-651-SWB flush-mount marine speakers","description":"\u003cp\u003e\n    Designed for marine environments, the Clarion CMS-651-SWB 6.5-inch (165 mm) coaxial flush-mount speakers deliver sound reproduction suited to nautical conditions. These 2-way speakers feature a UV-protected polypropylene woofer with synthetic rubber surround, and a 1\/2-inch (13 mm) balanced dome tweeter with neodymium magnet and ferrofluid cooling.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio Performance and Marine Durability\u003c\/h3\u003e\n\u003cp\u003e\n    With a continuous power (RMS) rating of 30 watts per channel and a peak power of 60 watts, the CMS-651-SWB is optimized for systems powered directly by the source unit, with recommended amplification of 20 to 60 watts RMS per channel. Frequency response spans 55 Hz to 20,000 Hz (± 3 dB) with a sensitivity of 87 dB @ 1W\/1m and an impedance of 4 ohms. These speakers carry \"Salt \u0026 Sun Certified\" certification (ASTM B117 for salt spray resistance and ASTM D4329 for UV stability), ensuring long-term performance in harsh marine conditions. They are also water-resistant.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Customization\u003c\/h3\u003e\n\u003cp\u003e\n    The coaxial design of the Clarion CMS-651-SWB allows for compact installation and consistent sound integration. Mounting dimensions include an outer diameter of 175 mm (6.90 inches), a cutout diameter of 127 to 133 mm (5.00 to 5.25 inches), and a mounting depth of 66 mm (2.60 inches). The front grille protrusion is 32 mm (1.25 inch) and the mounting hole circle measures 156 mm (6.14 inches). The package includes two sets of sport-style grilles, one white and one black, allowing for aesthetic adaptation to the boat. Installation is simplified by standard cutout dimensions and mounting holes designed for easy replacement.","brand":"Clarion","offers":[{"title":"Default Title","offer_id":56076393480532,"sku":"010-03045-00","price":85.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_adda25aa-8daa-415e-84cc-29a98ded5e66.jpg?v=1781126843"},{"product_id":"clarion-haut-parleurs-marins-encastrables-cms-651rgb-swb","title":"Flush-mount marine speakers Clarion CMS-651RGB-SWB","description":"\u003cp\u003e\n    Designed for the marine environment, the \u003cstrong\u003eClarion CMS-651RGB-SWB\u003c\/strong\u003e marine speakers are 2-way coaxial 6.5-inch (165 mm) models featuring RGB LED lighting. This audio system is suited to marine conditions thanks to its robust design.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical and acoustic specifications\u003c\/h3\u003e\n\u003cp\u003e\n    These speakers feature a 6.5-inch (16.5 cm) UV-protected polypropylene cone woofer with synthetic rubber surround. The tweeter is a 1\/2-inch (13 mm) balanced dome in PEI (Polyetherimide). They deliver a continuous RMS power of 30 watts and handle a peak power of 60 watts. The frequency response ranges from 55 Hz to 20,000 Hz (± 3 dB), with a sensitivity of 87 dB at 1 W\/1 m and a nominal impedance of 4 ohms. The required cutout diameter is approximately 127 to 133 mm (5.00 to 5.25 inches), with an outer frame diameter of approximately 175 mm (6.90 inches) and a mounting depth of 66 mm (2.60 inches).\n\u003c\/p\u003e\n\n\u003ch3\u003eDurable marine design and aesthetic integration\u003c\/h3\u003e\n\u003cp\u003e\n    The design of the \u003cstrong\u003eClarion CMS-651RGB-SWB\u003c\/strong\u003e is \"Salt and Sun Certified\", complying with ASTM-D4329 standards for UV stability and ASTM-B117 for salt spray resistance. Materials are UV-treated, audio and lighting connectors are waterproof, speaker surrounds are moisture-resistant, and mounting hardware is rustproof stainless steel. These speakers have an IP65 rating, ensuring protection against water jets. The integrated RGB LED lighting, located behind the tweeter, allows color customization via an RGB controller (sold separately). The package includes two sets of sport-style grilles, one white and one black, to match the boat's aesthetics.\n\u003c\/p\u003e","brand":"Clarion","offers":[{"title":"Default Title","offer_id":56076395807060,"sku":"010-03046-00","price":123.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_8b791329-c29d-4e77-bfa0-f0b4cf17e213.jpg?v=1781126863"},{"product_id":"clarion-haut-parleurs-marins-encastrables-cmsp-651-swg-6-5-pouces","title":"Clarion CMSP-651-SWG flush-mount marine speakers","description":"\u003cp\u003e\n    The Clarion CMSP-651-SWG flush-mount marine speakers are designed for robust audio performance in marine environments. These 2-way coaxial speakers with 6.5-inch (165 mm) drivers deliver 50 watts RMS per speaker (100 watts per pair) and 100 watts peak power. With a 4-ohm impedance, they offer a frequency response of 55 to 20,000 Hz and a sensitivity of 87 dB.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and materials\u003c\/h3\u003e\n\u003cp\u003e\n    The woofer features an injected polypropylene cone with mica (MIPP) and a synthetic rubber surround for increased durability. The 1-inch silk dome tweeter is mounted on a bridge and uses a neodymium magnet with ferrofluid cooling. These components are selected for clear sound reproduction and resistance to marine conditions. The product is certified for marine environments, exceeding industry standards, including ASTM-D4329 for UV stability and ASTM-B117 for salt spray resistance.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and features\u003c\/h3\u003e\n\u003cp\u003e\n    With a mounting depth of 71.9 mm (2.83 inches) and a cutout diameter of approximately 126.6 mm (4.984 inches), these speakers are designed for easy flush-mount installation. The durable construction includes UV- and corrosion-resistant plastic baskets and grilles, as well as waterproof audio connectors. Each pair comes with white and metallic gray sport grilles, offering aesthetic customization options. The CMSP-651-SWG speaker model does not include integrated RGB LED lighting.\n\u003c\/p\u003e\n\n\u003ch3\u003eUsage and safety instructions\u003c\/h3\u003e\n\u003cp\u003e\n    This product is water-resistant; it must not be submerged or exposed to high-pressure water jets. For maintenance, clean the product with mild soap and rinse only with fresh water. Installation requires appropriate tools and safety equipment, and professional installation is recommended. Before cutting or drilling, ensure there are no obstacles behind mounting surfaces. Do not install this product in an engine compartment or an area of extreme heat. Secure it firmly to prevent damage or injury under harsh conditions. Before installation, power off the audio system and disconnect the battery. Also check local regulations regarding the use of accent lighting on vessels.\n\u003c\/p\u003e","brand":"Clarion","offers":[{"title":"Default Title","offer_id":56076396462420,"sku":"010-03047-00","price":125.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_493a8448-76d6-4a0a-b40b-17142943cb51.jpg?v=1781126882"},{"product_id":"clarion-haut-parleurs-marins-encastrables-cmsp-651rgb-swg-led-rgb","title":"Flush-mount marine speakers Clarion CMSP-651RGB-SWG","description":"\u003cp\u003e\n    Designed for marine environments, the Clarion CMSP-651RGB-SWG 6.5-inch (165 mm) coaxial marine speakers provide a complete audio solution with integrated lighting. This 2-way system features an injection-molded polypropylene woofer cone filled with mica, paired with a synthetic rubber surround, optimized for marine use. The 1-inch (25 mm) silk dome tweeter is mounted on a bridge, incorporating a neodymium magnet and ferrofluid cooling for detailed high-frequency reproduction.\n\u003c\/p\u003e\n\u003ch3\u003eAudio performance and marine durability\u003c\/h3\u003e\n\u003cp\u003e\n    The Clarion CMSP-651RGB-SWG speakers deliver a nominal RMS power of 50 watts per speaker (100 watts per pair) and a peak power of 100 watts per speaker. With a 4-ohm impedance, they cover a frequency response from 55 to 20,000 Hz and a sensitivity of 87 dB. Their design is \"Salt and Sun Certified\", attesting to compliance with ASTM-D4329 standards for UV stability and ASTM-B117 for salt spray resistance. The baskets and grilles are UV- and corrosion-resistant, and the audio and lighting connectors are waterproof, ensuring reliability in marine environments.\n\u003c\/p\u003e\n\u003ch3\u003eIntegrated RGB LED lighting and installation\u003c\/h3\u003e\n\u003cp\u003e\n    These speakers feature RGB LED lighting hidden behind the tweeter housing, providing accent illumination on the woofer cone. Seven fixed LED colors are selectable via individual wiring, and an RGB lighting controller (sold separately) allows adjustable control. Installation requires a separate 12 V wiring for powering the LEDs of each speaker. With a mounting depth of 72 mm (2-7\/8 inches), a cutout diameter of approximately 127–133 mm (5 inches), and a frame diameter of 175 mm (6.875 inches), these speakers are designed for simplified integration and direct replacement. They are supplied with white and metallic gray sport grilles for aesthetic customization.\n\u003c\/p\u003e","brand":"Clarion","offers":[{"title":"Default Title","offer_id":56076396560724,"sku":"010-03048-00","price":154.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_b2bc9704-86ed-4259-8bd5-ddb42796b1cf.jpg?v=1781126901"},{"product_id":"clarion-haut-parleurs-marins-encastrables-cmsp-771rgb-swg-led","title":"CMSP-771RGB-SWG flush-mount marine speakers","description":"\u003cp\u003e\n    The Clarion CMSP-771RGB-SWG flush-mount marine speakers are designed to deliver high-quality audio and visual experience in marine environments. These 7.7-inch (195 mm) coaxial speakers feature customizable RGB LED lighting to adapt the onboard ambiance. They are engineered specifically to withstand harsh maritime conditions.\n\u003c\/p\u003e\n\u003ch3\u003eAudio Design\u003c\/h3\u003e\n\u003cp\u003e\n    Each speaker is a 2-way coaxial model. Power handling is 60 watts RMS per speaker (120 watts per pair), with a peak power of 200 watts per speaker. The frequency response ranges from 45 Hz to 20,000 Hz, with a sensitivity of 88 dB and an impedance of 4 ohms. The 7.7-inch woofer features a mica-filled injection-molded polypropylene cone and synthetic rubber surround, delivering stronger bass output than 6.5-inch models. The 1-inch (25 mm) tweeter is a silk dome mounted on a bridge, equipped with a neodymium magnet and ferrofluid cooling for clear high-frequency reproduction.\n\u003c\/p\u003e\n\u003ch3\u003eMarine Durability and RGB Lighting\u003c\/h3\u003e\n\u003cp\u003e\n    These speakers are \"Salt and Sun Certified,\" confirming resistance to UV rays, salt, mist, and moisture. Their construction includes UV- and corrosion-resistant plastic baskets and grilles, as well as sealed audio and lighting connectors. A liquid drainage system prevents water buildup. The frame is reinforced with a robust die-cast aluminum basket. The integrated RGB LED lighting allows for customizable onboard ambiance. The LED functionality requires a separate 12 V wiring harness per speaker and supports up to seven fixed colors. An RGB lighting controller (sold separately) is required for adjustable color control. The product ships with sport grilles in white and metallic gray for aesthetic options.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation Dimensions\u003c\/h3\u003e\n\u003cp\u003e\n    Mounting dimensions include a cutout diameter of 15.82 cm (6.23 inches), a frame diameter of 18.92 cm (7.45 inches), and a mounting depth of 7.82 cm (3.08 inches).\n\u003c\/p\u003e","brand":"Clarion","offers":[{"title":"Default Title","offer_id":56076397576532,"sku":"010-03049-00","price":195.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_c975bdba-7133-4b42-9ffe-b62a7991fef4.jpg?v=1781126922"},{"product_id":"clarion-subwoofer-marin-cmsp-101rgb-4-10-pouces-rgb","title":"Marine subwoofer Clarion CMSP-101RGB-4","description":"\u003cp\u003e\n    The \u003cstrong\u003eClarion marine subwoofer CMSP-101RGB-4\u003c\/strong\u003e is designed to deliver powerful bass in marine environments. This 10-inch (250 mm) subwoofer features a 4-ohm impedance and handles 250 watts RMS, with a peak power of up to 500 watts. It includes built-in RGB LED lighting with up to seven fixed colors without an external controller, or dynamic settings with an RGB controller sold separately.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and marine durability\u003c\/h3\u003e\n\u003cp\u003e\n    Built to withstand marine conditions, this subwoofer uses a UV-resistant injection-molded polypropylene cone, a Santoprene rubber surround, and a polymer basket. It is designed to exceed ASTM standards for UV exposure (D4329) and salt spray (B117). A marine-grade synthetic spider and a high-temperature voice coil contribute to its longevity. Connectors are waterproof to prevent moisture ingress.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and acoustic performance\u003c\/h3\u003e\n\u003cp\u003e\n    The CMSP-101RGB-4 is optimized for \"free air\" or \"infinite baffle\" applications, requiring no dedicated enclosure for installation. Its mounting dimensions include a cutout diameter of 222 mm (8-3\/4 inches) and a mounting depth of 131 mm (5.16 inches), with an overall diameter of 269 mm (10.57 inches). With a sensitivity of 86 dB at 1 watt and precise Thiele-Small parameters (Fs: 47.15 Hz, Qes: 1.005, Qms: 11.532, Qts: 0.925), it is engineered for detailed bass reproduction. The LED wiring requires a separate 12V power supply, with a recommended 250 mA fuse. Its net weight is 4.85 kg (10.69 lb).\n\u003c\/p\u003e","brand":"Clarion","offers":[{"title":"Default Title","offer_id":56076401639764,"sku":"010-03050-00","price":148.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_09421fc8-f707-4836-b75b-1aee7bcdcc37.jpg?v=1781126940"},{"product_id":"jl-audio-haut-parleurs-marins-m3-650x-c-gw-encastrables-coaxiaux","title":"JL Audio M3-650X-C-Gw flush-mount marine speakers","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio M3-650X-C-Gw flush-mount marine speakers\u003c\/strong\u003e are 6.5\" 2-way coaxial speakers designed for high-performance audio reproduction in marine environments. These speakers are optimized for infinite baffle mounting, requiring a minimum air volume of 57 liters (2 cubic feet) for optimal low-frequency performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and acoustic performance\u003c\/h3\u003e\n\u003cp\u003e\n    Each M3-650X-C-Gw speaker features a mineral-filled polypropylene injection-molded woofer cone with UV inhibitors and a synthetic rubber surround. The woofer motor uses JL Audio’s DMA (Dynamic Motor Analysis) optimization for improved dynamic behavior, better bass extension, increased efficiency, and optimized power handling. The 0.75\" (3\/4\") silk dome tweeter includes neodymium magnets and Ferrofluid cooling for detailed, smooth high-frequency response. A polyswitch protection circuit is integrated into the tweeter to minimize failure risk.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine durability and installation\u003c\/h3\u003e\n\u003cp\u003e\n    Built for marine use, these speakers exceed international standards for salt fog and UV resistance. Their UV-resistant polymer baskets and grilles encapsulate the woofer motor systems to prevent corrosion. The M3-650X-C-Gw speakers handle 60 watts RMS continuous power per speaker (120 watts per pair) and 225 watts peak power, with a 4-ohm impedance and a frequency response of 55 Hz to 25,000 Hz (±3 dB). Sensitivity is 89.5 dB at 1 W \/ 1 m. The cutout diameter is 4.972\" (127–133 mm), the frame outer diameter is 6.90\" (175 mm), and the mounting depth is 2.825\" (69.5 mm). For the optional RGB LED lighting, a separate 12 V wiring harness is required for each speaker, along with a 150 mA inline fuse on the positive LED cable. Classic white grilles are included.","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076402819412,"sku":"010-03060-00","price":209.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_18d94a37-e67d-4751-b097-31f8f6cc04d1.jpg?v=1781126959"},{"product_id":"jl-audio-haut-parleurs-marins-encastrables-m3-650x-s-gm","title":"JL Audio M3-650X-S-Gm flush-mount marine speakers","description":"\u003cp\u003e\n    The JL Audio M3-650X-S-Gm flush-mount marine coaxial speakers are designed for high-performance audio in marine environments. These 6.5-inch (165 mm) 2-way speakers feature a sport gray anthracite grille.\n\u003c\/p\u003e\n\n\u003ch3\u003eAcoustic design and performance\u003c\/h3\u003e\n\u003cp\u003e\n    These coaxial speakers integrate a 6.5-inch woofer with an injection-molded polypropylene cone filled with mica and UV inhibitors, paired with a synthetic rubber surround. The 0.75-inch (19 mm) tweeter is a pure silk dome, specifically treated for marine environments and using neodymium magnets for high efficiency. The long-excursion design, optimized by JL Audio’s DMA (Dynamic Motor Analysis) technology, enhances power output, bass extension, and power handling. The system is optimized for \"infinite-baffle\" operation, requiring a minimum air volume of 57 liters (2 cubic feet) for optimal low-frequency performance. A passive 2nd-order crossover for the tweeter includes a polyswitch semiconductor protection circuit.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSpeaker type:\u003c\/strong\u003e Marine 2-way 6.5-inch (165 mm) coaxial\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eContinuous power handling (RMS):\u003c\/strong\u003e 60 W per speaker (120 W per pair)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePeak music power handling:\u003c\/strong\u003e 225 W\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power (RMS):\u003c\/strong\u003e 20 to 125 W per channel (75-100 W per channel for optimal performance)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 ohms\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 55 - 25,000 Hz (55 Hz - 25 kHz ± 3 dB)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 89.5 dB @ 1 W \/ 1 m\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOutside frame diameter:\u003c\/strong\u003e 175 mm (6.90 inches)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCutout diameter:\u003c\/strong\u003e 127 to 133 mm (4.972 to 5.25 inches)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMounting depth:\u003c\/strong\u003e 69.5 to 72 mm (2.74 to 2.825 inches)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFront grille protrusion:\u003c\/strong\u003e 25 mm (0.973 inches)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBolt circle diameter:\u003c\/strong\u003e 155.5 mm (6.125 inches)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMarine durability and installation\u003c\/h3\u003e\n\u003cp\u003e\n    These speakers exceed industry standards for salt fog and UV resistance. They feature UV- and corrosion-resistant polymer baskets and grilles, a saltwater-resistant polymer basket, and integrated marine-grade stainless steel grilles. The woofer cones include UV inhibitors and the spiders are made of marine-grade synthetic fiber. The design allows flexible \"free-air\" (infinite-baffle) installation without requiring dedicated enclosures. RGB LED lighting is available as an option, requiring separate 12 V wiring for each speaker and an RGB controller (sold separately). A 150 mA fuse on the positive LED wire is required for M3-650 and M3-770 models.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076403999060,"sku":"010-03061-00","price":259.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_71bddb1a-5ed4-417f-8f13-8e8441b8302e.jpg?v=1781126989"},{"product_id":"jl-audio-haut-parleurs-marins-m3-650x-s-gm-i-6-5-pouces-led-rgb","title":"JL Audio M3-650X-S-Gm-i flush-mount marine speakers","description":"\u003cp\u003e\n    Designed for the marine environment, the \u003cstrong\u003eJL Audio M3-650X-S-Gm-i\u003c\/strong\u003e 6.5-inch coaxial marine speakers provide a robust and high-performance audio solution. These 2-way speakers integrate features suited for offshore use, combining clear sound reproduction with enhanced durability against the elements. They feature a sport grille in anthracite gray and integrated RGB LED lighting.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Audio Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio M3-650X-S-Gm-i\u003c\/strong\u003e speakers are equipped with a 6.5-inch (165 mm) woofer with injection-molded polypropylene cone loaded with mica, incorporating UV inhibitors. The synthetic rubber surround and long-throw design optimized by JL Audio’s Dynamic Motor Analysis (DMA) improve output, bass extension, and power handling. The 0.75-inch (19 mm) silk dome tweeter with neodymium magnet and ferrofluid cooling delivers precise response and power handling. RMS power is 60 watts per speaker, with a peak musical power of 225 watts. Nominal impedance is 4 ohms, and frequency response ranges from 55 Hz to 25,000 Hz (± 3 dB). System efficiency is 89.5 dB at 1W\/1m.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine-Environment-Specific Design\u003c\/h3\u003e\n\u003cp\u003e\n    The construction of the \u003cstrong\u003eM3-650X-S-Gm-i\u003c\/strong\u003e speakers is engineered for the marine environment, exceeding industry standards for salt fog and UV resistance. They use UV- and corrosion-resistant polymer baskets and grilles. Optimized for infinite baffle operation, these speakers do not require a dedicated enclosure and can be installed in various configurations with a minimum air volume of 0.05 cubic meters (2 cubic feet) for optimal performance. The 12 dB\/octave tweeter crossover includes a polyswitch semiconductor protection circuit to minimize tweeter failure risks.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated RGB LED Lighting\u003c\/h3\u003e\n\u003cp\u003e\n    These speakers feature integrated RGB LED lighting on the woofer cone. The LEDs can be wired to produce up to seven fixed colors. For adjustable control and a wider color range, an RGB lighting controller is available separately. Each speaker requires a separate 12V wiring for the LED function. Installation must include a 150 mA fast-blow inline fuse on the positive LED cable to protect the LEDs and speaker from excessive current, reducing fire or damage risks.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076406554964,"sku":"010-03062-00","price":277.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_9134b0bb-4d74-4a29-a555-4af01f9ecf86.jpg?v=1781127010"},{"product_id":"jl-audio-haut-parleurs-marins-encastrables-m3-650x-s-gw","title":"JL Audio M3-650X-S-Gw flush-mount marine speakers","description":"\u003cp\u003e\n    Designed for demanding marine environments, the \u003cstrong\u003eJL Audio M3-650X-S-Gw\u003c\/strong\u003e 6.5-inch coaxial marine speakers deliver high-performance sound. These 2-way speakers feature injection-molded polypropylene cones with mica fill and UV inhibitors and a rubber surround, paired with a 0.75-inch (19 mm) pure silk dome tweeter specifically treated for marine use.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio performance and marine durability\u003c\/h3\u003e\n\u003cp\u003e\n    With a continuous power handling of 60 Watts RMS and a peak power of 225 Watts, these speakers deliver a frequency response from 55 Hz to 25 kHz (± 3 dB) and a sensitivity of 89.5 dB at 1 W\/1 m. The nominal impedance is 4 Ohms, with a recommended amplifier power of 20 to 120 Watts per channel. The design incorporates JL Audio’s Dynamic Motor Analysis (DMA) technology to optimize motor dynamic behavior, improving output, bass extension, and power handling.\n\u003c\/p\u003e\n\u003cp\u003e\n    The marine-grade construction of these speakers exceeds industry standards for salt fog and UV exposure, thanks to UV- and corrosion-resistant polymer baskets and grilles. An advanced electronic tweeter protection circuit is included in the crossover networks, monitoring current and temporarily disconnecting the tweeter in case of overload, with automatic reset.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eM3-650X-S-Gw\u003c\/strong\u003e speakers are equipped with glossy white sport grilles.\n\u003c\/p\u003e\n\u003cp\u003e\n    These speakers are optimized for infinite baffle operation (no dedicated enclosure), requiring at least 57 liters (2 cubic feet) of space behind them for optimal bass performance. Installation is simplified by a wide mounting flange with a 6-hole pattern, compliant with industry standards. The mounting depth is 70.6 mm (2.78 inches), and the cutout diameter is approximately 126.3 mm to 133.35 mm (4.972 to 5.25 inches). The outer frame diameter is 175 mm (6.90 inches).\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076408029524,"sku":"010-03063-00","price":212.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_0c765b2f-53b3-4c44-a654-a264567193c0.jpg?v=1781127031"},{"product_id":"jl-audio-haut-parleurs-marins-m3-650x-s-gw-i","title":"JL Audio M3-650X-S-Gw-i flush-mount marine speakers","description":"\u003cp\u003e\n    The \u003cstrong\u003eJL Audio M3-650X-S-Gw-i\u003c\/strong\u003e flush-mount marine speakers are designed for harsh marine environments, delivering clear and powerful sound reproduction. These 6.5-inch (165 mm) coaxial speakers feature bright white sport grilles and RGB LED lighting, combining aesthetics with acoustic performance. They are specifically engineered to withstand marine conditions, including salt fog exposure and UV radiation.\n\u003c\/p\u003e\n\n\u003ch3\u003eAcoustic design and marine-grade durability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio M3-650X-S-Gw-i\u003c\/strong\u003e features a mineral-filled polypropylene cone woofer with UV inhibitors and a synthetic rubber surround. Its long-throw design and DMA (Dynamic Motor Analysis) optimization contribute to extended bass response and improved power handling. The 0.75-inch (19 mm) pure silk dome tweeter, treated for marine environments, uses neodymium magnets and Ferrofluid cooling for sound clarity. These speakers have a sensitivity of 89.5 dB @ 1 W \/ 1 m and a frequency response of 55 Hz to 25 kHz ± 3 dB. They handle 60 W RMS continuous power and 225 W peak power. The nominal system impedance is 4 Ω, with a recommended amplifier power range of 20 to 120 W per channel.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and RGB LED lighting\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for free-air or infinite baffle installation, these speakers optimize performance with a minimum air volume of 57 liters behind the woofer. Their marine construction exceeds industry standards for salt fog and UV resistance, featuring UV-stabilized polymer baskets and grilles, and encapsulated motor systems to prevent corrosion. The integrated RGB LED lighting in the grille illuminates the woofer cone. A separate 12 V wiring is required for the LEDs, and a 150 mA fuse per speaker is recommended. An optional RGB controller (sold separately) allows adjustable color control. The mounting is standard with a 156 mm mounting circle and a cutout diameter of 5.00 to 5.25 inches (127 to 133 mm). The mounting depth is 2.78 inches (71 mm).\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076409995604,"sku":"010-03064-00","price":264.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_2970ceb8-d6fa-4645-8fc4-10dc004f6919.jpg?v=1781127054"},{"product_id":"jl-audio-haut-parleurs-marins-encastrables-m3-770x-c-gw","title":"JL Audio M3-770X-C-Gw flush-mount marine speakers","description":"\u003cp\u003e\n    Designed for the marine environment, the \u003cstrong\u003eJL Audio M3-770X-C-Gw flush-mount marine speakers\u003c\/strong\u003e are 7.7-inch 2-way coaxial models. They feature a mica-injected polypropylene woofer cone with UV inhibitors and a synthetic rubber surround, optimized for long excursion and infinite baffle operation. The 0.75-inch (19 mm) treated silk dome tweeter is specifically designed to withstand marine conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine Audio Performance\u003c\/h3\u003e\n\u003cp\u003e\n    These speakers deliver a continuous power (RMS) of 70 Watts per speaker (140 Watts per pair) and a peak power of 225 Watts. The frequency response ranges from 45 Hz to 25 kHz (± 3 dB) with a system efficiency of 90.5 dB at 1W\/1m, ensuring detailed and powerful sound reproduction in open environments. The nominal impedance is 4 ohms, and the recommended amplifier power is 20 to 140 Watts RMS per channel.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Marine Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio M3-770X-C-Gw\u003c\/strong\u003e incorporate corrosion- and UV-resistant materials, exceeding industry standards for salt and sun exposure. Polymer baskets encapsulate the woofer motor system to prevent corrosion. Their oversized 7.7-inch design improves efficiency and mid-bass response compared to 6.5-inch models. The woofers are optimized to operate without a dedicated enclosure, though an air volume of at least 2 cubic feet is recommended for optimal performance. JL Audio’s Dynamic Motor Analysis (DMA) technology optimizes motor dynamic behavior for reduced distortion and better bass extension. The tweeter includes a self-resetting overload protection circuit. The cutout diameter is 6.25 inches (159 mm) with a mounting depth of 3.15 inches (80 mm). White \"Classic\" grilles are included. The M3 speakers are positioned to offer marine performance at a more accessible price than JL Audio’s M6 models.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076411011412,"sku":"010-03065-00","price":300.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_586c1136-6a35-44bd-a72a-42862d76fbd9.jpg?v=1781127074"},{"product_id":"jl-audio-haut-parleurs-marins-encastrables-m3-770x-s-gm-7-7-pouces","title":"JL Audio M3-770X-S-Gm flush-mount marine speakers","description":"\u003cp\u003e\n    The JL Audio M3-770X-S-Gm flush-mount marine speakers are designed to deliver high-quality audio reproduction in open marine environments. These 7.7-inch 2-way coaxial speakers feature durable construction.\n\u003c\/p\u003e\n\n\u003ch3\u003eAcoustic design and power handling\u003c\/h3\u003e\n\u003cp\u003e\n    With a nominal diameter of 196 mm (7.7 inches), these JL Audio speakers benefit from an oversized design, resulting in increased efficiency and improved mid-bass response compared to 6.5-inch models. Each speaker offers a continuous power handling (RMS) of 70 Watts and a peak musical power handling of 225 Watts. The nominal impedance is 4 ohms and the sensitivity reaches 90.5 dB at 1 W \/ 1 m. The frequency response extends from 45 Hz to 25 kHz (± 3 dB).\n\u003c\/p\u003e\n\u003cp\u003e\n    The woofer features an injection-molded polypropylene cone with mica fill, UV inhibitors, and a synthetic rubber surround. It is optimized for infinite baffle operation, requiring no dedicated enclosure. The 19 mm (0.75-inch) silk dome tweeter is equipped with a second-order high-pass filter and a semiconductor protection circuit. JL Audio’s DMA (Dynamic Motor Analysis) technology is integrated to optimize the motor’s dynamic behavior.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine durability and integrated lighting\u003c\/h3\u003e\n\u003cp\u003e\n    The marine-grade construction of the M3-770X-S-Gm uses materials resistant to corrosion and UV, exceeding industry standards for salt spray and ultraviolet exposure. UV- and corrosion-resistant polymer baskets and metallic gray Sport grilles complete the design. This model does not include integrated RGB LED lighting.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation dimensions\u003c\/h3\u003e\n\u003cp\u003e\n    For installation, the required cutout diameter is 159 mm (6.25 inches). The mounting depth is approximately 80 to 84 mm (3.15 to 3.25 inches), and the outer frame diameter is 196 mm (7.70 inches). A minimum air volume of at least 57 liters (2 cubic feet) is recommended for optimal low-frequency performance.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076411994452,"sku":"010-03066-00","price":341.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_d4730662-a571-4e54-89dc-275e074dc30e.jpg?v=1781127094"},{"product_id":"jl-audio-haut-parleurs-marins-m3-770x-s-gm-i-led","title":"JL Audio M3-770X-S-Gm-i flush-mount marine speakers","description":"\u003cp\u003e\n    Designed for the marine environment, the \u003cstrong\u003eJL Audio M3-770X-S-Gm-i\u003c\/strong\u003e 7.7-inch coaxial marine speakers deliver a robust and high-performance audio solution. These 2-way speakers are optimized for outdoor use, ensuring clear and powerful sound reproduction on the water. They combine a continuous power rating of 70 watts RMS with a peak music power output of 225 watts, providing dynamic sound even at high volumes. Their Gunmetal-colored \"Sport\" grilles feature integrated RGB LED lighting for customizable onboard lighting ambiance.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust and Durable Marine Design\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eJL Audio M3-770X-S-Gm-i\u003c\/strong\u003e marine speakers are engineered to withstand harsh marine conditions. Their construction exceeds industry standards for salt fog and UV exposure resistance, making them impervious to seawater and corrosion. The UV- and corrosion-resistant polymer woofer baskets encapsulate the motor systems for enhanced corrosion protection. The injection-molded polypropylene woofer, filled with mica and UV inhibitors, is paired with a synthetic rubber surround. The 0.75-inch (3\/4\") silk dome tweeter delivers detailed high-frequency reproduction.\n\u003c\/p\u003e\n\n\u003ch3\u003eAudio Performance and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With a nominal impedance of 4 ohms and an efficiency of 90.5 dB at 1 W\/1 m, these speakers deliver an extended frequency response from 45 Hz to 25 kHz (± 3 dB). The 7.7-inch size provides improved efficiency and mid-bass response compared to 6.5-inch marine speakers. The woofers are optimized using JL Audio’s proprietary DMA (Dynamic Motor Analysis) technology, reducing distortion and enhancing transient performance and bass quality. An integrated 2nd-order passive crossover for the tweeters, featuring a semiconductor protection circuit, manages frequency distribution. Designed for infinite baffle applications, they require a minimum air volume of 57 liters (2 cubic feet) for optimal performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated RGB LED Lighting\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eM3-770X-S-Gm-i\u003c\/strong\u003e speakers feature built-in multicolor RGB LED lighting integrated into the grilles. This requires a separate 12 V wiring harness for each speaker. Up to seven fixed LED colors can be wired directly. For adjustable and extended color control, an external RGB lighting controller (sold separately, such as the JL Audio MLC-RW) is required. A 150 mA inline fast-blow fuse must be installed on the positive LED wire for each speaker to protect the LEDs and speaker from excessive electrical current.\n\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":56076412256596,"sku":"010-03067-00","price":374.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_954cdbbd-75ac-4461-a989-32bbd3280b7b.jpg?v=1781127115"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/sonorisation.png?v=1765874860","url":"https:\/\/skysat.fr\/en\/collections\/audio.oembed","provider":"Skysat","version":"1.0","type":"link"}