{"title":"Battery isolators","description":"\u003ch2\u003eBattery isolators: isolate, switch, and secure DC circuits\u003c\/h2\u003e\n\u003cp\u003eA battery isolator allows physical isolation of a battery bank or main circuit from the rest of the installation. On a boat, it is a safety device as critical as a fuse: it enables shutting down a circuit for maintenance, isolating a faulty battery, cutting power to consumers during winter lay-up, or making the installation clear in an emergency.\u003c\/p\u003e\n\u003cp\u003eThis collection includes manual battery isolators, selectors, dual-circuit units, remote controls, battery hubs, and low-voltage electronic protection devices for 12 V, 24 V, and 48 V systems. They work with \u003ca href=\"\/en\/collections\/batteries\"\u003ebatteries\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/fusibles\"\u003efuses\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/bms-batteries\"\u003eBMS\u003c\/a\u003e, \u003ca href=\"\/en\/collections\/moniteurs-de-batterie\"\u003ebattery monitors\u003c\/a\u003e, and \u003ca href=\"\/en\/collections\/relais-contacteurs\"\u003econtactors, solenoids \u0026amp; disconnect switches\u003c\/a\u003e aboard, but do not replace these functions.\u003c\/p\u003e\n\n\u003ch2\u003eBattery isolator types\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOn\/off\u003c\/strong\u003e: cuts a single circuit or battery bank. This is the clearest solution for an engine bank, service bank, or main power feed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1\/2\/Both\/Off selector\u003c\/strong\u003e: allows choosing between two batteries or paralleling them. Suitable for some classic installations but must be used methodically to avoid manipulation errors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual circuit\u003c\/strong\u003e: switches two circuits simultaneously while keeping banks separate. Useful for engine + service when a single clear control is needed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Circuit Plus\u003c\/strong\u003e: adds an emergency parallel function, often used to assist starting without improvised wiring.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemote control\u003c\/strong\u003e: motorized isolator or switching relay controllable from the panel, useful when the main isolator must remain close to the batteries.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElectronic protection\u003c\/strong\u003e: automatically cuts a load in case of low voltage or a protection event. This is not a maintenance mechanical isolator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMain ranges\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en\/products\/blue-sea-e-series-5510e-coupe-batterie-double-circuit\"\u003eBlue Sea e-Series dual circuit 5510E\u003c\/a\u003e, \u003ca href=\"\/en\/products\/blue-sea-e-series-dual-circuit-plus-coupe-batterie\"\u003ee-Series Dual Circuit Plus\u003c\/a\u003e, \u003ca href=\"\/en\/products\/blue-sea-e-series-on-off-coupe-batterie-9004e\"\u003ee-Series on\/off\u003c\/a\u003e, and \u003ca href=\"\/en\/products\/blue-sea-e-series-selector-3-position-interrupteur-batterie-afd\"\u003ee-Series 3-position selector with AFD\u003c\/a\u003e: robust switches for engine and service installations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en\/products\/blue-sea-coupe-batteries-m-series-marche-arret\"\u003eBlue Sea m-Series on\/off\u003c\/a\u003e, \u003ca href=\"\/en\/products\/blue-sea-coupe-batteries-m-series-double-circuit\"\u003em-Series dual circuit\u003c\/a\u003e, and mini versions: compact formats for panels and tight spaces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en\/products\/blue-sea-hd-series-coupe-batterie-on-off-heavy-duty\"\u003eBlue Sea HD-Series heavy-duty on\/off\u003c\/a\u003e, \u003ca href=\"\/en\/products\/blue-sea-hd-series-selecteur-batterie-500a-afd\"\u003eHD-Series selector with AFD\u003c\/a\u003e, and 500 A models: suited for higher currents and demanding main circuits.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en\/products\/blue-sea-ml-rbs-commutateur-batterie-distance-manuel-12v\"\u003eBlue Sea ML-RBS 12 V\u003c\/a\u003e, \u003ca href=\"\/en\/products\/blue-sea-ml-rbs-coupe-batterie-distance-24v\"\u003eML-RBS 24 V\u003c\/a\u003e, and Auto-Release versions: remote battery isolators with local manual control.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en\/products\/bep-coupe-batterie-motorise-vss-12v-275a-deutsch\"\u003eBEP VSS motorized 12 V 275 A\u003c\/a\u003e, \u003ca href=\"\/en\/products\/bep-czone-701-mdcz-coupe-batterie-motorise\"\u003eBEP CZone 701-MDCZ\u003c\/a\u003e, \u003ca href=\"\/en\/products\/bep-smart-battery-hub-twin-engine-275a\"\u003eSmart Battery Hub twin engine\u003c\/a\u003e, and \u003ca href=\"\/en\/products\/bep-coupe-batterie-bipolaire-ez-400a-48v-ip66\"\u003eBEP bipolar EZ 400 A\u003c\/a\u003e: BEP solutions for centralized isolation, multi-engine architectures, or CZone\/NMEA 2000 systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en\/products\/victron-energy-smart-battery-protect-12-24v-220a\"\u003eVictron Smart BatteryProtect 12\/24 V 220 A\u003c\/a\u003e, \u003ca href=\"\/en\/products\/victron-energy-batteryprotect-12-24v-100a-sectionneur-batterie\"\u003eBatteryProtect 12\/24 V 100 A\u003c\/a\u003e, and \u003ca href=\"\/en\/products\/victron-energy-batteryprotect-48v-100a-protection-batterie\"\u003eBatteryProtect 48 V 100 A\u003c\/a\u003e: electronic protection devices to cut loads based on voltage or a control signal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to choose\u003c\/h2\u003e\n\u003cp\u003eThe primary criterion is the required function: isolating a battery, selecting between two banks, cutting two circuits together, remote control, or protecting a load from deep discharge. Next come continuous current rating, peak current, nominal voltage, number of poles, accessibility, and control type.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle bank\u003c\/strong\u003e: an on\/off switch clearly labeled is often sufficient, with a rating above the actual maximum current.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine + service\u003c\/strong\u003e: a dual circuit or Dual Circuit Plus avoids confusion between banks while keeping a quick control.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-current loads\u003c\/strong\u003e: windlass, bow thruster, or inverter require an isolator and cables sized for peaks, not just average current.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePanel far from batteries\u003c\/strong\u003e: a motorized or remote model keeps high-current cable runs short.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLithium\u003c\/strong\u003e: verify coordination with the BMS, contactors, switching relays, and charging parameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAFD, bipolar, motorized: key points\u003c\/h2\u003e\n\u003cp\u003eThe AFD function protects the alternator by preventing a sudden field interruption when the engine battery is cut on certain installations. A bipolar isolator cuts both positive and negative simultaneously, useful in specific architectures or isolated systems. A motorized isolator makes control from the cockpit or panel easier but must always remain understandable and accessible as a backup.\u003c\/p\u003e\n\u003cp\u003eBatteryProtect-type devices should not be confused with a maintenance isolator. They are useful for protecting batteries from deep discharge but do not replace a mechanical isolator accessible when the installation must be powered down.\u003c\/p\u003e\n\n\u003ch2\u003eCommon mistakes\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSelecting rating based solely on battery capacity, while peak current of the load is often the real criterion.\u003c\/li\u003e\n  \u003cli\u003eInstalling the isolator too far from the batteries, creating an unprotected high-current cable run.\u003c\/li\u003e\n  \u003cli\u003eConfusing emergency paralleling with permanent use of two banks together.\u003c\/li\u003e\n  \u003cli\u003eCutting a charging source without considering the alternator, regulator, or lithium BMS.\u003c\/li\u003e\n  \u003cli\u003eNeglecting labeling: in an emergency, the crew must immediately understand which bank or circuit is isolated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSkysat advice\u003c\/h2\u003e\n\u003cp\u003eOn a clean marine installation, the battery isolator must be easy to understand, quick to reach, and consistent with circuit protections. We favor an architecture where each function is separate: the \u003ca href=\"\/en\/collections\/fusibles\"\u003efuse\u003c\/a\u003e protects the cable, the isolator isolates, the \u003ca href=\"\/en\/collections\/bms-batteries\"\u003eBMS\u003c\/a\u003e protects lithium cells, the \u003ca href=\"\/en\/collections\/moniteurs-de-batterie\"\u003emonitor\u003c\/a\u003e measures, and the \u003ca href=\"\/en\/collections\/relais-de-charge\"\u003echarge relay\u003c\/a\u003e manages power distribution between banks when needed.\u003c\/p\u003e","products":[{"product_id":"bep-coupe-batterie-deux-bancs-paralleles-ez-400a-48v","title":"Battery switch 2 parallel banks EZ 400 A continuous 1\/1\u00262\/Parallel\/Off 48 V","description":"\u003cp\u003e\n    Designed for advanced energy management aboard, the BEP 772-DBC battery switch is an integrated solution for 48V systems. This device allows control of two battery banks and two separate loads, consolidating the functions of three battery switches into a single compact unit. It stands out for its ability to optimize power distribution while providing overcurrent protection for demanding applications.\n\u003c\/p\u003e\n\n\u003ch3\u003ePower management and safety\u003c\/h3\u003e\n\u003cp\u003e\n    The 772-DBC supports a continuous current of 400A, an intermittent current of 600A for 5 minutes, and a cranking capacity of 1500A for 10 seconds, with a maximum voltage of 48V DC. Its intuitive operation (1\/1\u0026amp;2\/Parallel\/Off) includes a unique \"Isolated-On\" position. This safety feature allows power to be maintained to service loads (such as house loads and VHF radio) even when the engine is electrically isolated, a critical feature for maintenance or emergencies. The 10mm (3\/8\") tinned copper studs ensure optimal conductivity and corrosion resistance.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The BEP 772-DBC battery switch is engineered for ease of installation and system integration. Its \"EZ-Mount\" design enables front wiring, simplifying access and implementation. With a standard footprint of 3.85\" x 3.85\", it fits easily into various electrical panels. Its compatibility with the BEP Pro Installer busbar range allows direct clustering, enabling faster and more compact installations. Removable side plates and a detachable knob enhance installation and maintenance flexibility. Constructed from reinforced fiber plastics and using stainless steel nuts\/washers, this battery switch offers IP67 protection and ignition resistance tested to UL1107, ensuring reliability in the marine environment.\n\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":53723749974356,"sku":"772-DBC","price":67.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/fsvprvur_img-01.jpg?v=1779463619"},{"product_id":"bep-coupe-batterie-bipolaire-400a-48v","title":"Bipolar battery switch 400 A 48 V","description":"\u003cp\u003e\n    Designed for managing high-demand electrical circuits in marine and mobile environments, the BEP 400A 48V bipolar battery switch provides simultaneous isolation of the positive and negative terminals. This feature is essential for metal-hulled vessels to prevent galvanic corrosion and ensure enhanced safety during maintenance operations or in emergencies. With a continuous rating of 400A, an intermittent peak of 600A for 5 minutes, and a starting capacity of 1500A for 10 seconds, this switch is suited for high-power systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced integration and safety\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eBEP 770-DP bipolar battery switch\u003c\/strong\u003e integrates the EZ-Mount system for simplified installation, allowing front-side wiring and optimizing access to connections. Its design ensures a shared interconnection height, enabling EZ-Mount switches to align directly with the BEP Pro Installer busbar range, facilitating compact and efficient installations. The product is UL1107 certified for flame resistance and CE marked, ensuring compliance with safety standards.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust and versatile design\u003c\/h3\u003e\n\u003cp\u003e\n    Constructed from fiber-reinforced plastics and fitted with stainless steel washers\/nuts, this battery switch is built to withstand harsh marine environments. Its IP66 and IP67 ratings ensure resistance to powerful water jets and enhanced sealing. The removable knob provides an additional isolation function for maintenance and safety. The BEP 770-DP model stands out from conventional single-pole switches by its ability to fully disconnect the circuit, thereby protecting the entire electrical system.\n\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":53723750105428,"sku":"770-DP","price":68.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5d3a9b9d-08fa-41a7-9141-6e6f66117ef7.jpg?v=1779463578"},{"product_id":"bep-coupe-batterie-bipolaire-ez-400a-48v-ip66","title":"Bipolar battery switch EZ 400 A","description":"\u003cp\u003e\n    The BEP EZ 400A bipolar battery switch is a robust and reliable solution for managing marine electrical circuits. Designed for 12 to 48V DC systems, it provides a continuous current capacity of 400A, with an intermittent capacity of 600A for 5 minutes and a starting current of 1500A for 10 seconds. Its bipolar design simultaneously isolates both positive and negative poles, offering enhanced safety compared to commonly used unipolar battery switches in similar applications. This model is an essential component for installations requiring emergency shutdown or secure maintenance.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust design and marine certifications\u003c\/h3\u003e\n\u003cp\u003e\n    This battery switch is designed for demanding marine environments. Its IP66 protection rating ensures resistance to powerful water jets and dust. It is also \"ignition protected,\" meaning it is designed to prevent the ignition of fuel vapors, a major safety advantage aboard. CE and UL1107 certifications attest to its compliance with international safety and performance standards. The M10 (3\/8\") connection studs are sized for heavy-gauge cables and require a tightening torque of 13.5 Nm (10 lbf) to ensure an optimal electrical connection resistant to vibrations.\n\u003c\/p\u003e\n\n\u003ch3\u003eEase of installation and durability\u003c\/h3\u003e\n\u003cp\u003e\n    The EZ mounting system simplifies the integration of the battery switch into various electrical panels or bulkheads. A 92 mm (3 5\/8\") drilling diameter is required for its flush installation, with M5, 10g or 3\/16\" fasteners. The unique mounting system allows for clean flush mounting by removing the front clips, providing a neat finish. BEP, a brand known for the quality of its electrical solutions, backs this product with a 5-year warranty, underscoring its confidence in the durability and reliability of this critical safety and energy management equipment aboard. This battery switch is a strategic choice for professionals and demanding recreational boaters.\n\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":53723750302036,"sku":"770-DP-EZ","price":74.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_22499f2d-4987-4b52-bf63-c1a1ddde47c2.jpg?v=1778055780"},{"product_id":"bep-coupe-batterie-telecommande-275a-32v","title":"Remote battery switch 275A 32V","description":"\u003cp\u003e\n    Designed for optimized electrical management aboard, the BEP 275A 32V remote-controlled battery switch provides a main battery disconnection solution. This device is particularly suited to marine installations and recreational vehicles where centralized control and reduced cable lengths are critical. It stands out from traditional manual switches by its ability to be mounted directly near the battery, thereby reducing heavy-gauge cable runs, installation costs, and overall system weight.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and technical reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The BEP AD185 battery switch is engineered for demanding applications, offering a continuous DC current rating of 275 amperes and handling an intermittent current of 455 amperes DC for 5 minutes. Its starting capacity reaches 1250 amperes DC for 10 seconds. Operating within a DC voltage range of 9.5 to 32 volts, it is compatible with 12V and 24V systems. Its low power consumption in \"off\" mode, typically 12 mA, preserves battery charge. The construction features tinned copper conductors, stainless steel nuts, and high-temperature reinforced plastics, ensuring durability in marine environments. The terminals are equipped with two 10 mm (3\/8 inch) tinned copper studs. The product is tested to UL1107 ignition protection standards.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features and integration\u003c\/h3\u003e\n\u003cp\u003e\n    This remote-controlled battery switch incorporates key features for safe and efficient use. Its remote operation allows the switch to be positioned in an optimal location, while a manual override option ensures compliance with CE\/ABYC requirements in the event of electrical failure. An LED indicator on the control panel (sold separately) provides visual feedback on the switch status. The BEP battery switch is designed for easy integration into digital management systems such as CZone and supports multiple remote switches for the same battery bank. Its \"fail-safe\" design ensures the switch retains its last state even in the event of power loss or remote control connection failure. The system is also compatible with an interchangeable labeling system (items 713 or 715).\n\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":53723750465876,"sku":"AD185","price":151.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_9c7e7d0e-62e4-4f27-a4e5-1230a010efed.jpg?v=1779962265"},{"product_id":"bep-coupe-batterie-usage-intensif-600a-48v-marine","title":"High-duty-cycle battery switch 600 A 48 V","description":"\u003cp\u003e\n    Designed for marine environments and demanding applications, the BEP 720B battery switch is a robust single-pole battery isolation switch. It stands out for its ability to handle high loads, with a continuous DC current of 600 amperes and a maximum DC voltage of 48 volts. Its design allows it to withstand significant current spikes, reaching 800 amperes DC intermittently (5 minutes) and up to 2500 amperes DC peak (10 seconds) for engine starting.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    The BEP 720B is molded from fiber-reinforced plastic, offering high resistance to temperature and chemical agents. Its compliance with IP66 standard ensures protection against dust and powerful water jets, making it suitable for engine compartments and exposed areas. The connection terminals are 2 x 12 mm (1\/2 inch), made of tinned copper, ensuring optimal electrical conductivity and corrosion resistance. The sliding copper contacts are self-cleaning, contributing to the device's long-term reliability. Its compact dimensions of 102 x 102 x 90 mm (H) allow flexible installation, flush-mounted or surface-mounted. This capacity places it above lower-amperage BEP switches, such as models 701 or 721, which handle continuous currents of 275A or 300A, making it ideal for larger electrical systems or large diesel engine starts.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Safety is a central feature of the BEP 720B. It is protected against ignition, making it safe for use in environments where fuel vapors may be present. A removable rear cover protects exposed terminals, preventing accidental short circuits. Removable side panels offer multiple cable entry options, simplifying installation. For added security, the switch can be locked with a 6 mm padlock (not supplied). As part of the Navico group, this battery switch integrates with the BEP Contour Lock system and is compatible with CZone digital switching systems. This integration enables centralized control and monitoring of power, providing a more sophisticated solution than traditional standalone switches.\n\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":53723751383380,"sku":"720B","price":61.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_4ff6647d-1c5c-44c8-9e09-1450c17df11a.jpg?v=1779463552"},{"product_id":"bep-set-3-coupe-batteries-unipolaires-275a-marine","title":"Set of 3 single-pole 275A battery disconnect switches","description":"\u003cp\u003e\n    The BEP set of 3 275A single-pole battery switches is designed for reliable isolation of battery circuits in marine and demanding environments. Each switch provides ignition protection and can handle a continuous load of 275 amperes DC, with an intermittent current of 455 amperes for 5 minutes and a starting current of 1250 amperes for 10 seconds. The maximum supported nominal voltage is 48 volts DC.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    These battery switches stand out for their construction in fiber-reinforced molded plastics resistant to high temperatures, ensuring durability in harsh conditions. The terminals are equipped with two 10 mm (3\/8 inch) tinned copper studs with nuts, facilitating connections for cables up to 1\/0. Each switch measures approximately 69 x 69 x 75 mm (2.75 x 2.75 x 3 inches). Activation is performed by rotating the knob 45° for on\/off positions. The design allows for surface or flush mounting via a 52 mm (2.1 inch) hole. The patented Contour locking system allows switches to be used individually or assembled for an integrated installation. This design complies with ABYC specifications and has been independently tested to UL 1107 standards at 110% of specified ratings.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Safety is enhanced by a removable control knob in the 45° counterclockwise position, preventing unintended activation during maintenance. The knob also features an interchangeable labeling system for various applications. Three removable side plates provide easy access for cables, while a rear cover isolates terminals against short circuits, ensuring ABYC compliance. The \"Easy Fit\" design simplifies installation by replacing most European lever-and-post switches and can be flush-mounted in panels up to 19 mm (3\/4 inch) thick using a removable threaded ring. While these switches are manual solutions, BEP, as a member of the Navico group, also offers CZone digital switching systems, providing options for more complex electrical architectures. This set of battery switches represents a robust and certified solution for managing onboard power, comparable to other single-pole switches on the market but distinguished by its certifications and patented locking system.\n\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":53723752857940,"sku":"AD100","price":78.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_19ca12dc-3492-4d05-bb59-14227aa7639b.jpg?v=1779962243"},{"product_id":"blue-sea-coupe-batterie-500a-serie-m-cle-verrouillage","title":"Battery switch 500 A M series on\/off with locking key","description":"\u003cp\u003e\n    Designed for managing a single battery to a single load group, the \u003cstrong\u003eBLUE SEA 6004B-BSS M series ON\/OFF battery switch\u003c\/strong\u003e provides reliable isolation for marine electrical systems and vehicles. This model features a continuous current rating of 300A, an intermittent current rating of 500A (5 min), and a starting current of 900A (30 sec). Its maximum voltage of 48V DC makes it compatible with a wide range of installations.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003e6004B-BSS battery switch\u003c\/strong\u003e is equipped with 3\/8\" (M10) tinned copper terminals, ensuring maximum conductivity and enhanced corrosion resistance. The one-piece terminal stud design prevents loosening over time. The IP66 protection rating guarantees resistance to dust and powerful water jets, making it suitable for demanding marine environments. This model complies with UL 1500 and SAE J1171 standards for external ignition protection and is UL 1107 listed, also meeting ABYC requirements for battery switches.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the BLUE SEA Range\u003c\/h3\u003e\n\u003cp\u003e\n    Within the BLUE SEA battery switch range, the \u003cstrong\u003e6004B-BSS M series\u003c\/strong\u003e is positioned as a compact and secure solution for single-circuit isolation. Unlike the selector models in the E or HD series, which manage multiple battery banks or allow combinations, the M series, and this model in particular, focuses on simplicity and safety with an ON\/OFF switch featuring a locking key. This removable key feature provides additional security, acting as a service lockout device to prevent accidental activation or deactivation of the DC system, particularly during maintenance operations. Its \"mini\" format makes it ideal for installations where space is limited, such as on small outboard motors or generators.","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":53723782709588,"sku":"6004B-BSS","price":33.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Coupe_batterie_500A_serie_M_ON_OFF_avec_cle_de_verrouillage_6004B-BSS_-_Ref_92868f71.jpg?v=1779201376"},{"product_id":"blue-sea-coupe-batterie-distance-ml-rbs-12v-500a","title":"Remote battery switch ML-RBS with manual control - 12 V DC 500 A","description":"\u003cp\u003e\n    The BLUE SEA ML-RBS 7700 is a remote magnetic battery switch designed for managing high-current 12V DC circuits. It offers a continuous switching capacity of 500A and up to 1450A peak (30 seconds), enabling reliable isolation of battery banks or connection of heavy loads.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    This battery switch stands out with its bistable magnetic latching design, meaning it consumes no current in the ON or OFF state, only during state changes (less than 7A for 20 ms). This feature differentiates it from traditional solenoids, which require continuous current draw, thus optimizing the system’s energy consumption. The contacts are made of silver alloy, ensuring high reliability for switching under load, with a lifespan of 10,000 cycles at 12V\/300A.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The ML-RBS 7700 includes a manual override control, providing an additional safety level for ON\/OFF operation with or without power, and a \"LOCK OFF\" function for electrical system maintenance. It features 3\/8\"-16 (M10) tinned copper terminals for maximum conductivity and corrosion resistance, with a maximum tightening torque of 15.8 N•m (140 in-lb). A remote LED indicator can be connected to monitor the switch state. Compared to other models in the ML series, such as the 7713 which includes an \"Auto-Releasing\" function for emergency starts from a depleted battery bank, the 7700 prioritizes energy conservation thanks to its magnetic latching. This product meets external ignition protection requirements ISO 8846 and SAE J1171 and is rated IP66.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"12 V","offer_id":53723782906196,"sku":"7700B-BSS","price":204.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Coupe-batterie_a_distance_ML-RBS_avec_commande_manuelle_-_12V_DC_500A_7700B-BSS_-_Ref_9aaa8455.jpg?v=1779201705"},{"product_id":"blue-sea-coupe-batterie-distance-ml-rbs-24v-500a","title":"Remote battery switch ML-RBS with manual control - 24 V DC 500 A","description":"\u003cp\u003e\n    Designed for demanding marine electrical systems, the BLUE SEA ML-RBS 7702B-BSS remote battery switch is a power management solution for 24V DC installations. This device offers high load switching capacity, with a continuous current of 500A, an intermittent current of 700A (for 5 minutes), and a cranking current of 1450A (for 30 seconds).\n\u003c\/p\u003e\n\u003ch3\u003eTechnology and Key Features\u003c\/h3\u003e\n\u003cp\u003e\n    The ML-RBS 7702B-BSS incorporates a bi-stable magnetic latching technology, meaning it draws no current in the ON or OFF position, thereby reducing parasitic drain. Current is only drawn during state changes (less than 4A for 40 ms). Its silver alloy contacts ensure high reliability for active load switching. Unlike the ML series solenoids without manual control (PN 7701\/7703), this 7702B-BSS model features a manual control button that provides an additional safety level. This function allows manual activation or deactivation with or without electrical power, and includes an OFF position lock for maintenance operations. The product is designed with 3\/8\"-16 (M10) tinned copper studs for maximum conductivity and enhanced corrosion resistance, ensuring robust connections with a maximum torque of 15.8 N•m (140 in-lb).\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Durability\u003c\/h3\u003e\n\u003cp\u003e\n    The ML-RBS 7702B-BSS battery switch complies with external ignition protection requirements ISO 8846 and SAE J1171, and is CE marked, making it suitable for gasoline engine compartments on boats. Its IP66 ingress protection rating shields it from powerful water jets. The device supports a contact operating voltage of 0-64V, offering versatility for multi-voltage systems, while its nominal control voltage is 24V DC (range: 18-32V DC). The ML-RBS 7702B-BSS positions itself as an advanced solution for 24V battery management, providing a more performant and secure alternative to classic manual switches or solenoids without direct physical control options.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"24 V","offer_id":53723783135572,"sku":"7702B-BSS","price":198.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Coupe-batterie_a_distance_ML-RBS_avec_commande_manuelle_-_24V_DC_500A_7702B-BSS_-_Ref_3d646202.jpg?v=1779201732"},{"product_id":"blue-sea-coupe-batterie-on-off-hd-afd","title":"Robust HD series battery switch with AFD","description":"\u003cp\u003e\nThe robust ON-OFF battery switch HD series with AFD from BLUE SEA, part number 3001B-BSS, is designed for managing single-battery circuits in demanding marine installations. With a continuous rating of 600 amperes and a 1,750-ampere starting capacity for 30 seconds, it is suitable for large diesel engines and high-power electrical systems. This model stands out for its robustness and its Alternator Field Disconnect (AFD) function, which protects the alternator diodes in case of battery disconnection while the engine is running.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and performance of the HD series\u003c\/h3\u003e\n\u003cp\u003e\nBLUE SEA’s HD series sits above the m-Series (300A continuous) and e-Series (350A continuous) in terms of current capacity, making it ideal for applications requiring superior power management. The tinned copper terminals (1\/2 inch \/ M12-1.75) provide maximum conductivity and corrosion resistance, with a one-piece design to reduce the risk of overheating. Their 7\/8-inch (22.22 mm) length allows for multiple cable lugs, facilitating the integration of up to eight charge cables. The recommended tightening torque is 24.86 N·m (220 in-lb) for 4\/0 AWG (120 mm²) battery cables.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and compliance\u003c\/h3\u003e\n\u003cp\u003e\nThe 3001B-BSS complies with American Boat and Yacht Council (ABYC) requirements for battery circuit interrupters. It is UL-listed (UL 1107) for electrical power switches and meets external ignition protection requirements UL 1500 and SAE J1171, making it safe for installation on gasoline-powered boats. Its IP66 ingress protection rating ensures protection against dust and powerful water jets, guaranteeing reliability in marine environments. The housing allows for surface or rear-panel mounting, offering installation flexibility.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":53723783299412,"sku":"3001B-BSS","price":85.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Coupe_batterie_On-Off_robuste_serie_HD_avec_AFD_3001B-BSS_-_Ref_5647b54d.jpg?v=1779201293"},{"product_id":"blue-sea-interrupteur-batterie-serie-m-300a-bipolaire-marin","title":"m 300 A red bipolar battery switch","description":"\u003cp\u003e\n    Designed for simplified and secure electrical management on board, the BLUE SEA m-Series 300A bipolar battery switch (part number 6010B-BSS) is a compact solution for marine applications and recreational vehicles. It is specifically sized for outboard motors and small gasoline or diesel engines, with a continuous rating of 300A per circuit and a maximum voltage of 32V DC. Its bipolar design allows simultaneous switching of two isolated battery banks or management of positive and negative conductors according to required configurations. It belongs to the BLUE SEA m-Series, known for its optimized format, positioned below the e-Series (350A) and HD-Series (up to 600A) designed for more powerful propulsion systems.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and Reliability in Marine Environments\u003c\/h3\u003e\n\u003cp\u003e\n    The 6010B-BSS model delivers electrical performance with a continuous rating of 300A per circuit. It also supports intermittent peaks of 450A for 5 minutes and 675A during startup for 30 seconds per circuit. The tinned copper 3\/8\"-16 (M10) terminal studs ensure maximum conductivity and enhanced corrosion resistance, a critical feature in marine environments. The one-piece terminal stud design eliminates any risk of loosening over time. This switch complies with ABYC requirements, is UL 1107 listed, and meets UL 1500 and SAE J1171 standards for external ignition protection, ensuring safe installation on gasoline-powered boats. Its IP66 rating makes it resistant to dust and powerful water jets.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Positioning in the BLUE SEA Range\u003c\/h3\u003e\n\u003cp\u003e\n    This battery switch offers versatile mounting options, allowing surface, front-panel, or rear-panel installation to adapt to various integration configurations. An insulating cover with detachable sections protects the rear contacts and facilitates cable access from multiple directions. The 6010B-BSS model is a \"Dual Circuit™\" type switch, meaning it manages two isolated circuits without automatic combining functionality. It is distinct from the 6011 model, the \"Dual Circuit Plus™,\" which includes battery combining functionality. This distinction is important for system designers seeking a purely isolating switching solution without the added complexity or functionality of combining, typically to strictly separate a starter battery bank from a service bank in dual-battery installations.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Red","offer_id":53723785298260,"sku":"6010B-BSS","price":55.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Interrupteur_de_batterie_serie_m_300A_rouge_bipolaire_6010B-BSS_-_Ref_071e43dc.jpg?v=1779201440"},{"product_id":"blue-sea-interrupteur-batterie-serie-m-300a-unipolaire","title":"300 A single-pole red battery switch series M","description":"\u003cp\u003e\n    Designed for power management of small outboard motors and diesel engines, the BLUE SEA m series 300A red single-pole battery switch (6006B-BSS) provides a reliable and secure disconnection solution. This switch allows switching a single battery to a single load group, providing a simple yet effective circuit cut-off. It is particularly suitable for applications requiring direct battery isolation for safety or maintenance.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    The 6006B-BSS model offers a continuous rating of 300A DC and an intermittent rating of 500A DC for 5 minutes, in compliance with UL 1107. Its starting capacity reaches 900A DC for 30 seconds. It supports a maximum voltage of 48V DC. The terminal studs are made of tinned copper, 3\/8\"-16 (M10), ensuring maximum conductivity and corrosion resistance. Their one-piece design prevents loosening over time. The recommended torque for cables is 13.56 N·m (120 in-lb), with compatibility for 4\/0 AWG (120 mm²) cables to meet nominal performance.\n\u003c\/p\u003e\n\u003ch3\u003eSafety and installation\u003c\/h3\u003e\n\u003cp\u003e\n    This switch is rated IP66, providing protection against powerful water jets and particles. It is also ignition-protected, meeting UL 1500, SAE J1171 Marine, and ISO 8846 Marine requirements, making it safe for installation on gasoline-powered boats. An insulating cover with three detachable sections protects the rear contacts and facilitates cable access from different directions. The removable knob adds a layer of security, allowing service locking. Mounting options include surface, front panel, or rear panel, with mounting holes accepting #10 screws. The BLUE SEA m series 300A complies with all ABYC requirements for battery switches and is UL 1107 listed, in addition to CE certification.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Button \/ Red","offer_id":53723785494868,"sku":"6006B-BSS","price":31.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Interrupteur_de_batterie_serie_m_300A_rouge_unipolaire_6006B-BSS_-_Ref_966d2085.jpg?v=1779201400"},{"product_id":"blue-sea-selecteur-batterie-e-series-4-positions","title":"e-Series 4-position battery selector","description":"\u003cp\u003e\n    Designed for precise management of electrical power aboard, the BLUE SEA e-Series 4-position battery selector (part number 9001EB-BSS) allows selection between battery 1, battery 2, or combining both (1+2) for charging or emergency starting. This model is specifically suited for applications requiring high output power and consistent reliability, ideal for gasoline or diesel inboard engines.\n\u003c\/p\u003e\n\n\u003ch3\u003eElectrical Capabilities and Construction\u003c\/h3\u003e\n\u003cp\u003e\n    This selector handles a maximum voltage of 32V DC and provides a continuous capacity of 350A, an intermittent current of 600A (5 min), and a starting current of 1200A (30 sec). The tinned copper terminal studs of 3\/8\"-16 (M10) ensure maximum conductivity and corrosion resistance. Their one-piece design prevents loosening, and their 22.22 mm length accommodates multiple cable lugs. A tightening torque of 15.82 N·m (140 in-lb) is recommended. The selector accepts battery cables up to 4\/0 AWG (95mm²) to meet its specifications.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The BLUE SEA e-Series selector features a \"Make-Before-Break\" design that allows switching between battery banks without interrupting power, thus protecting sensitive electronic equipment. It is IP66 certified, providing protection against powerful water jets, and is ignition-protected per UL 1500 and SAE J1171 standards, making it safe for gasoline-powered boats. Compliance with ABYC, UL 1107, and ISO 8846 requirements confirms its robustness and reliability. The housing allows surface or rear-panel mounting, offering installation flexibility.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the BLUE SEA Range\u003c\/h3\u003e\n\u003cp\u003e\n    The 9001EB-BSS sits at the core of the BLUE SEA battery selector range. With its 350A continuous capacity, it is intended for gasoline and diesel inboard engines, offering higher capacity than the m-Series models (300A) designed for outboards and small engines. It serves as an intermediate choice before the HD-Series models (500-600A) reserved for large diesel engines, providing a balance between performance and cost for a wide range of vessels.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":53723788378452,"sku":"9001EB-BSS","price":52.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Technical_Detail_-_BLUE_SEA_Selecteur_de_batterie_e-Series_4_positions_9001EB-BSS_-_Ref_ba7928ea.jpg?v=1779202186"},{"product_id":"blue-sea-selecteur-batterie-serie-m-300a-3-positions","title":"Battery selector switch series M 300 A red 3 positions","description":"\u003cp\u003e\n    The BLUE SEA series m 300A red battery selector, part number 6008B-BSS, is designed for managing DC power systems on boats equipped with outboard motors or small gasoline\/diesel engines. This 3-position switch (OFF\/1\/2) allows selecting one of two batteries to power loads, with no combining function.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    With a continuous current rating of 300A and a 900A starting current for 30 seconds, the 6008B-BSS supports a maximum voltage of 32V DC. Its tinned copper terminals of 3\/8\"-16 (M10) ensure maximum conductivity and corrosion resistance, with a recommended tightening torque of 13.56 N·m. The one-piece terminal stud design guarantees stable connections over time. This model is ignition-protected per UL 1500 and SAE J1171 standards and has an IP66 rating.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the BLUE SEA Range\u003c\/h3\u003e\n\u003cp\u003e\n    The BLUE SEA series m, which includes the 6008B-BSS, is distinguished by its compact format and 300A continuous amperage, specifically targeting outboard motors and small gasoline or diesel engines. In comparison, the series e offers 350A continuous amperage for inboard gasoline or diesel engines, while the HD series is designed for large diesel engines with continuous amperage up to 600A. The 6008B-BSS, as a 3-position selector, focuses on battery isolation and selection, unlike 4-position or Dual Circuit Plus selector models that include battery combining functions. It also holds CE, ISO 8846 Marine, UL 1107, and UL 1500 certifications, and meets ABYC requirements.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":53723788542292,"sku":"6008B-BSS","price":52.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_Selecteur_de_batterie_serie_m_300A_rouge_3_positions_6008B-BSS_-_Ref_24a99553.jpg?v=1779201419"},{"product_id":"victron-energy-battery-protect-12-24v-100a-protection-batterie","title":"Battery Protect 12\/24V 100A","description":"\u003cp\u003e\n    Conçu pour la protection des batteries, le Victron Energy Battery Protect 12\/24V 100A est un dispositif de déconnexion de charge essentiel pour les systèmes embarqués. Ce Battery Protect déconnecte automatiquement les charges non essentielles avant que la batterie ne soit complètement déchargée, prévenant ainsi les dommages irréversibles, ou avant qu'elle ne dispose d'une puissance insuffisante pour démarrer le moteur. Il peut également servir d'interrupteur de charge pour protéger les équipements sensibles contre les surtensions, déconnectant la charge si la tension DC dépasse 16V ou 32V.\n\u003c\/p\u003e\n\u003ch3\u003eFonctionnalités Techniques et Performance\u003c\/h3\u003e\n\u003cp\u003e\n    Le Battery Protect 12\/24V 100A détecte automatiquement la tension du système (12V ou 24V) et offre une programmation simplifiée grâce à un affichage LED à 7 segments qui indique le réglage choisi. Sa consommation de courant est ultra-faible, avec seulement 1,5 mA en fonctionnement et 0,6 mA en mode arrêt ou en cas de coupure basse tension, ce qui est particulièrement pertinent pour les batteries Li-ion. L'appareil intègre une protection ignifuge grâce à des commutateurs MOSFET, éliminant tout risque d'étincelles. Un paramètre spécial est disponible pour les batteries Li-ion, permettant un contrôle direct par un BMS externe tel que le VE.Bus BMS, et il peut également être utilisé comme interrupteur de charge entre un chargeur de batterie et une batterie Li-ion.\n\u003c\/p\u003e\n\u003ch3\u003eGestion des Alarmes et Déconnexions\u003c\/h3\u003e\n\u003cp\u003e\n    Ce dispositif de Victron Energy est doté d'une sortie d'alarme temporisée qui s'active si la tension de la batterie chute sous le niveau de déconnexion préréglé pendant plus de 12 secondes, évitant ainsi les fausses alarmes dues au démarrage du moteur. La déconnexion de la charge est également temporisée à 90 secondes après l'activation de l'alarme (immédiate si déclenchée par le VE.Bus BMS), tandis que la reconnexion intervient 30 secondes après que la tension de la batterie soit revenue au seuil de reconnexion. Les seuils par défaut sont de 10,5V ou 21V pour la déconnexion et de 12V ou 24V pour l'engagement. L'électronique est classée IP67 (noyée dans de la résine) pour une protection accrue, et l'appareil peut fonctionner à pleine charge entre -40°C et +40°C.\n\u003c\/p\u003e\n\u003ch3\u003ePositionnement dans la Gamme Victron Energy\u003c\/h3\u003e\n\u003cp\u003e\n    Le Battery Protect BP-100 (100A) se positionne comme une solution intermédiaire au sein de la série BatteryProtect de Victron Energy, offrant une capacité de courant continu supérieure au BP-65 (65A) et adaptée à une large gamme d'applications, sans atteindre la puissance du BP-220 (220A). Contrairement au \u003ca href=\"#\"\u003eSmart BatteryProtect\u003c\/a\u003e qui propose une connectivité Bluetooth, ce modèle s'appuie sur une programmation via la méthode \"PROG pin to GND pin\", offrant une alternative fiable pour les installations où la simplicité de configuration et la robustesse sont prioritaires sur les fonctionnalités de communication avancées. Il est crucial de noter que le Battery Protect est un appareil unidirectionnel, conçu pour gérer le courant de la borne IN (batterie) vers la borne OUT (charge) uniquement, et n'est pas adapté pour les courants inverses provenant de sources de charge directes. Pour les onduleurs ou chargeurs\/onduleurs, il doit être utilisé pour contrôler leur port à distance et non directement en ligne DC.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723840381268,"sku":"BPR000100400","price":44.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_d3ff1a7d-e8de-4961-aff6-d4187621304c.jpg?v=1772644425"},{"product_id":"victron-energy-battery-protect-12-24v-220a-protection-batterie","title":"Battery Protect 12\/24V 220A","description":"\u003cp\u003e\n    Conçu pour préserver la durée de vie de vos batteries, le \u003cstrong\u003eBattery Protect 12\/24V 220A\u003c\/strong\u003e de VICTRON ENERGY déconnecte les charges non essentielles avant une décharge complète ou un niveau insuffisant pour le démarrage du moteur. Ce dispositif gère automatiquement les tensions de système 12V ou 24V et supporte un courant de charge continu maximal de 220A, avec un courant de crête de 600A pendant 30 secondes. Il se distingue des modèles inférieurs comme le BP-65 (65A) et le BP-100 (100A) par sa capacité à gérer des charges plus importantes. Une différenciation clé avec le Smart BatteryProtect réside dans sa méthode de programmation via la broche PROG vers GND, plutôt qu'une interface Bluetooth.\n\u003c\/p\u003e\n\n\u003ch3\u003eFonctionnalités avancées et protection\u003c\/h3\u003e\n\u003cp\u003e\n    Le Battery Protect 12\/24V 220A dispose d'un affichage LED à 7 segments pour une configuration simplifiée des seuils d'engagement et de désengagement. Il offre un mode spécifique pour les batteries Li-ion, permettant un contrôle direct par un BMS externe tel que le VE.Bus BMS ou le Lynx Smart BMS, et peut également fonctionner comme interrupteur de charge. Sa consommation de courant est ultra-faible, avec 1,5 mA en fonctionnement et 0,6 mA en mode arrêt ou coupure basse tension, un atout pour les systèmes autonomes.\n\u003c\/p\u003e\n\n\u003ch3\u003eSécurité et intégration système\u003c\/h3\u003e\n\u003cp\u003e\n    La protection contre les surtensions est intégrée, déconnectant la charge si la tension DC dépasse 16V (pour un système 12V) ou 32V (pour un système 24V). Le dispositif utilise des commutateurs MOSFET, garantissant une absence d'étincelles et une résistance à l'allumage. Une sortie d'alarme temporisée s'active après 12 secondes de basse tension, sans déclenchement intempestif lors du démarrage du moteur, et supporte jusqu'à 50 mA. La déconnexion de la charge est également temporisée à 90 secondes (immédiate si contrôlée par VE.Bus BMS), avec une reconnexion après 30 secondes lorsque la tension remonte. Le Battery Protect 12\/24V 220A est classé IP67 pour son électronique (potting) et IP00 pour ses connexions, et se monte avec un couple de 9 Nm, pesant 0,8 kg avec des dimensions de 62 x 123 x 120 mm. Il est important de noter qu'il s'agit d'un appareil unidirectionnel, conçu pour le flux de courant de l'entrée (batterie) vers la sortie (charge) uniquement, et n'est pas adapté aux courants inverses des sources de charge.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723840577876,"sku":"BPR000220400","price":72.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_60a2a081-3163-4fe7-bcaf-fbc7acbc7f9e.jpg?v=1772644431"},{"product_id":"victron-energy-battery-protect-12-24v-65a","title":"Battery Protect 12\/24V 65A","description":"\u003cp\u003e\n    Le Victron Energy Battery Protect 12\/24V 65A est conçu pour protéger les batteries contre la décharge excessive en déconnectant les charges non essentielles. Il assure que la batterie conserve une énergie suffisante pour le démarrage du moteur, prolongeant ainsi sa durée de vie utile.\n\u003c\/p\u003e\n\u003ch3\u003eFonctionnalités Clés\u003c\/h3\u003e\n\u003cp\u003e\n    Ce dispositif détecte automatiquement la tension du système (12V ou 24V). Sa programmation est facilitée par un affichage LED à 7 segments, permettant de définir les seuils d'engagement et de désengagement. Une configuration spécifique est disponible pour les batteries Li-ion, où le BatteryProtect peut être contrôlé par un BMS externe comme le VE.Bus BMS. Il peut également servir d'interrupteur de charge entre un chargeur de batterie et une batterie Li-ion.\n\u003c\/p\u003e\n\u003ch3\u003ePerformances et Protection\u003c\/h3\u003e\n\u003cp\u003e\n    Avec une consommation de courant ultra-faible (1,5 mA en fonctionnement, 0,6 mA à l'arrêt ou en mode de coupure basse tension), le Battery Protect 65A est adapté aux systèmes sensibles. Il intègre une protection contre les surtensions, déconnectant la charge si la tension DC dépasse 16V (pour un système 12V) ou 32V (pour un système 24V). Le dispositif est conçu avec des commutateurs MOSFET, le rendant insensible à l'allumage et sans étincelles. Il gère un courant de charge continu maximal de 65A et un courant de crête de 250A pendant 30 secondes. L'électronique est encapsulée (IP67), tandis que les connexions sont IP00.\n\u003c\/p\u003e\n\u003ch3\u003eGestion des Alertes et Déconnexions\u003c\/h3\u003e\n\u003cp\u003e\n    Une sortie d'alarme est activée si la tension de la batterie chute sous le seuil prédéfini pendant plus de 12 secondes, évitant les fausses alarmes lors du démarrage du moteur. Cette sortie à collecteur ouvert est protégée contre les courts-circuits, avec un courant maximal de 50 mA. La déconnexion de la charge est retardée de 90 secondes après l'activation de l'alarme, et la reconnexion intervient 30 secondes après que la tension de la batterie ait dépassé le seuil de reconnexion. Contrairement au Smart BatteryProtect, ce modèle est programmé via la méthode du pin PROG vers le pin GND. Il s'agit d'un appareil unidirectionnel, gérant le courant dans une seule direction à la fois (vers une charge ou depuis un chargeur).\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723840840020,"sku":"BPR000065400","price":32.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_774fd083-0ee5-45c5-8118-5dacee739a7b.jpg?v=1772644437"},{"product_id":"victron-energy-smart-battery-protect-12-24v-220a","title":"Smart Battery Protect 12\/24V-220A","description":"\u003cp\u003e\n    Designed for protecting marine and mobile electrical systems, the \u003cstrong\u003eSmart Battery Protect 12\/24V-220A\u003c\/strong\u003e from VICTRON ENERGY (reference BPR122022000) is an intelligent circuit breaker. It protects batteries from excessive discharge, preventing potential damage and ensuring sufficient power for engine starting. This model stands out from the standard BatteryProtect range with its integrated Bluetooth connectivity, allowing simplified programming of on\/off thresholds via the VictronConnect app, in addition to the nine predefined levels accessible via the programming pin.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Smart BatteryProtect 12\/24V-220A automatically detects system voltage (12V or 24V) during initial power-up. It offers a maximum continuous charging current of 220A, with a peak current of 600A sustained for 30 seconds, positioning it as the most powerful model in the Smart BatteryProtect series, above the 65A and 100A versions. The operating voltage range spans from 6V to 35V. Its power consumption is particularly low, at 1.4 mA when Bluetooth is active and 0.9 mA when shutdown occurs due to low voltage, a critical feature for lithium-ion battery installations.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced protection and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    This device includes overvoltage protection, disconnecting the load if DC voltage exceeds 16.3V (for a 12V system) or 32.6V (for a 24V system), protecting sensitive equipment. Using MOSFET transistors instead of relays makes it spark-proof. An alarm output is triggered after 12 seconds if battery voltage drops below the disconnection threshold, preventing false alarms caused by engine start. Load disconnection occurs after 90 seconds, with reconnection after 30 seconds if voltage recovers. The Smart BatteryProtect can be configured for lithium-ion batteries and controlled by an external VE.Bus BMS, acting as a charge switch between a charger and a lithium-ion battery. The electronics are IP67 protected (resin-sealed), while connections are IP00. It is supplied with a pre-assembled negative DC cable connector.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53723863744852,"sku":"BPR122022000","price":90.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_09e1d4cb-1f62-4714-a92d-cc1e4354e00e.jpg?v=1778604377"},{"product_id":"bep-hub-batterie-intelligent-triple-moteur-nmea2000-czone","title":"Intelligent battery hub 3 engines","description":"\u003cp\u003eThe BEP intelligent triple-engine battery hub (reference 80-716-0031-00) is a centralized management system designed specifically for vessels equipped with three propulsion engines. Combining battery switching, emergency paralleling, and monitoring in a single IPX7-certified enclosure, it replaces traditional mechanical switch clusters. Capable of handling continuous currents of 300 A, intermittent loads of 700 A, and startup peaks reaching 1450 A, it automatically adapts to 12 V or 24 V battery banks.\u003c\/p\u003e\n\u003ch3\u003eCZone and NMEA2000 integration\u003c\/h3\u003e\n\u003cp\u003eUnlike standard switches from the brand, this hub natively communicates over NMEA2000 and CZone networks via a Micro-C port. It includes an internal precision shunt to monitor voltage, service current, and overall state of charge (SoC). Supplied with a temperature sensor, it optimizes data transmission while maintaining extremely low power consumption, measured at less than 5 mA in standby mode and 92 mA at maximum operation.\u003c\/p\u003e\n\u003ch3\u003eSafety and overcurrent warnings\u003c\/h3\u003e\n\u003cp\u003eThe system integrates bidirectional voltage-sensitive switches (VSS) to automate priority charging while retaining a physical backup mechanical control for each channel. \u003cstrong\u003eWarning:\u003c\/strong\u003e In accordance with technical bulletin 197381 issued by Navico Group, this specific model is subject to a report regarding an overcurrent issue. It is therefore classified as obsolete material in our catalog and is intended exclusively for replacement in existing installations.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":53723892154708,"sku":"80-716-0031-00","price":1715.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/b2zxk4rk_img-01.jpg?v=1778056569"},{"product_id":"bep-czone-701-mdcz-coupe-batterie-motorise","title":"Remote battery switch CZone 275 A 32 V","description":"\u003cp\u003eThe \u003cstrong\u003eBEP CZone 701-MDCZ\u003c\/strong\u003e is a motorized remote-controlled battery switch, specifically optimized for CZone digital switching systems. Unlike standard models in the BEP 701-MD range that require an external relay for remote control, this version integrates direct connectivity with CZone output modules. This significantly simplifies wiring and speeds up installation, while providing precise control from a CZone display or remote switches.\u003c\/p\u003e\n\n\u003ch3\u003eDesigned for CZone systems\u003c\/h3\u003e\n\u003cp\u003eThe 701-MDCZ is the only motorized battery switch from BEP developed specifically for the CZone ecosystem. It differs from the standard 701-MD by its ability to be directly controlled by a CZone output module, without an intermediate relay. This optimization reduces the number of connections and potential failure points, while offering cleaner and more reliable integration in complex CZone installations. It also supports multiple remote switches, such as a dashboard switch and a wireless remote control, for maximum flexibility.\u003c\/p\u003e\n\n\u003ch3\u003eElectrical performance and robustness\u003c\/h3\u003e\n\u003cp\u003eWith a continuous capacity of 275 amps and 455 amps intermittently, the 701-MDCZ is designed to handle the high loads of modern marine electrical systems. Its starting current reaches 1250 amps for 10 seconds, making it suitable for service batteries and high-power engines. It operates within a voltage range of 8 to 30.5 volts DC, covering 12V and 24V installations. Its robust design includes 10 mm tinned copper studs and IPX6 waterproofing (water-resistant), ensuring long-term reliability in demanding marine environments.\u003c\/p\u003e\n\n\u003ch3\u003eIntegrated reliability and safety\u003c\/h3\u003e\n\u003cp\u003eReliability is at the core of the 701-MDCZ's design. In case of connection or power loss, the battery switch remains in its current state, preventing any unintended circuit interruption. An optional piezoelectric buzzer (ref. 54-27C4) can be connected to provide audible confirmation of remote control actions (two beeps for activation, one beep for shutdown). The switch is also ignition-protected (UL 1107) and features a removable button for isolation during maintenance, offering maximum safety.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721043788116,"sku":"701-MDCZ","price":198.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/b303mw51_img-01.jpg?v=1778055297"},{"product_id":"bep-701-mdvs-coupe-batterie-motorise-vss-12v-275a","title":"Motorized battery switch 701-MDVS BEP","description":"\u003cp\u003eThe BEP 701-MDVS motorized battery switch with voltage-sensitive operation is designed to automate battery bank management on board vessels. Operating at 12V, it combines the features of a voltage-sensitive relay (VSS) and an emergency parallel switch. Capable of handling continuous current up to 275A and up to 1250A peak during startup, this module ensures high-power electrical distribution while protecting batteries from deep discharge through its automatic cutoff algorithms.\u003c\/p\u003e\n\u003ch3\u003eAutomated management and emergency coupling\u003c\/h3\u003e\n\u003cp\u003eUnlike the standard manual model 701 in the same range, the \u003cstrong\u003e701-MDVS\u003c\/strong\u003e integrates motorization and advanced voltage detection. In automatic mode, it continuously monitors charge state: if voltage drops below 12.2V for more than 5 minutes, the system disengages to preserve the integrity of the starter battery. It also features an exclusive emergency parallel function (Emergency Parallel) allowing manual or remote coupling of battery banks in case of failure. An integrated LED indicator provides real-time system status via different light codes (rapid flashing for voltage errors outside the 8-15V range, long flashing for parallel mode).\u003c\/p\u003e\n\u003ch3\u003eInstallation and reliability in marine environments\u003c\/h3\u003e\n\u003cp\u003eCertified IPX6 and ignition-protected (UL 1107 and ABYC\/CE standards), this battery switch is built to withstand the harshest marine environments (operating from -20°C to +60°C). Its 10 mm (3\/8\") tinned copper studs and stainless steel nuts ensure optimal conductivity and corrosion resistance. Mechanical installation is flexible with surface or flush mounting options, and removable side panels facilitate power cable routing up to 50 mm² (or 70 mm² with a tension reducer). Power consumption remains extremely low, with only 15 mA drawn in the off position.","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721045459284,"sku":"701-MDVS","price":177.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/b303lyl8_img-01.jpg?v=1778055339"},{"product_id":"bep-coupe-batterie-motorise-vss-12v-275a-deutsch","title":"Motorized battery switch VSS 12 V 275 A","description":"\u003cp\u003eThe BEP 701-MDVS-D 12V motorized battery switch is an advanced solution for automated energy management aboard. A direct evolution of the renowned manual model in the 701 series, this version integrates a complete motorization coupled with a voltage-sensitive charging relay (VSS). Designed specifically for 12V systems, it supports continuous loads of 275A, 455A intermittently, and can withstand up to 1250A during startup. Its control wiring via Deutsch connector ensures superior connection reliability, essential to counter vibrations and humidity in demanding marine environments.\u003c\/p\u003e\n\u003ch3\u003eAutomation and electrical safety\u003c\/h3\u003e\n\u003cp\u003eThis module stands out from traditional couplers by its dual functionality: it automatically manages the coupling and decoupling of battery banks based on detected voltage (low-voltage cutoff threshold at 12.2V), and offers an emergency parallel mode, essential in case of engine battery failure. The integration of LED indicators allows precise monitoring of system status (automatic mode, overload, low-voltage disconnection, or manual mode). In the off position, its electrical consumption remains extremely low, at just 15mA.\u003c\/p\u003e\n\u003ch3\u003eRobust design for nautical use\u003c\/h3\u003e\n\u003cp\u003eCertified IPX6 (protected against powerful water jets) and ignition-protected, this battery switch complies with strict UL 1107, ABYC, and CE standards. It is equipped with two 10 mm (3\/8\") studs accepting cables up to 50 mm² (or 70 mm² with a tension reducer). Capable of operating in temperatures ranging from -20°C to +60°C, it outperforms standard couplers in terms of durability and secure integration within modern electrical networks.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721046540628,"sku":"701-MDVS-D","price":247.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/fvde3xgt_701-MDVS_MAIN.jpg?v=1778055380"},{"product_id":"bep-vsr-dig-12-24v-mc20-relais-batterie","title":"VSR digital 12\/24 V 140 A","description":"\u003cp\u003eThe \u003cstrong\u003eBEP VSR DIG 12\/24V MC20\u003c\/strong\u003e is a digital voltage sensing relay (DVSR) designed for automatic and reliable management of dual batteries aboard. Unlike older analog relays such as the BEP 710-125A it replaces, this model integrates digital technology that provides increased precision in trigger thresholds and reduced power consumption. It ensures priority charging of the starter battery before automatically combining the service battery, thus protecting the engine against unintended discharge.\u003c\/p\u003e\n\n\u003ch3\u003eDigital technology and voltage versatility\u003c\/h3\u003e\n\u003cp\u003eThe DVSR stands out for its ability to operate in both 12V and 24V DC with automatic selection, making it ideal for a wide range of vessels, from small sailboats to motorboats. Its digital design guarantees precise switching at programmed voltages: engagement at 13.4V (12V) \/ 26.8V (24V) and disengagement at 12.8V (12V) \/ 25.6V (24V). Compared to a simple coupler or diode isolator, it introduces no voltage drop, maximizing alternator charging efficiency.\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and current capacity\u003c\/h3\u003e\n\u003cp\u003eWith a continuous current capacity of \u003cstrong\u003e125 A\u003c\/strong\u003e and an intermittent current of \u003cstrong\u003e140 A\u003c\/strong\u003e, this relay is suitable for most onboard charging systems. Its robust design, certified to UL 1107 and CE standards, ensures long-term reliability in demanding marine environments.\u003c\/p\u003e\n\n\u003ch3\u003eLow standby consumption and storage mode\u003c\/h3\u003e\n\u003cp\u003eA key advantage of this digital model is its extremely low standby consumption of just \u003cstrong\u003e1.8 mA\u003c\/strong\u003e (1.6 mA at 24V). Additionally, thanks to an optional switching circuit, it can be placed in storage mode at \u003cstrong\u003e0 W\u003c\/strong\u003e, which is essential for preserving the battery during winter storage or long periods of inactivity—a feature absent in older models.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and system integration\u003c\/h3\u003e\n\u003cp\u003eThe VSR DIG 12\/24V MC20 connects simply with three wires, leaving the alternator wiring intact. It comes with an optional output for a remote status LED indicator, enabling easy monitoring of battery combination status. It can also be paired with an ignition switch to activate storage mode, offering maximum integration flexibility.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721049489748,"sku":"710-140A","price":70.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/fvdffwhd_710-140A_HR.jpg?v=1778055432"},{"product_id":"bep-coupe-batterie-720-mdo-500a-interrupteur-motorise","title":"Battery switch 720-MDO 500 A","description":"\u003cp\u003eThe \u003cstrong\u003eBEP 720-MDO 500A battery switch\u003c\/strong\u003e is a motorized switch designed for remote battery management on professional and recreational boats. Unlike a simple manual battery switch such as the BEP 701-MD, the 720-MDO model includes a motor and control electronics, allowing the switch to be placed as close as possible to the batteries. This significantly reduces the length, cross-section, and cost of high-current wiring. It differs from the 720-MD-EP model by its Emergency Parallel function, which, when activated remotely, temporarily connects two batteries for emergency starting. This function is automatically disabled after 10 minutes to prevent discharge of the service battery.\u003c\/p\u003e\n\n\u003ch3\u003eRemote control and emergency parallel\u003c\/h3\u003e\n\u003cp\u003eThe 720-MDO is operated using a remote key switch (not included). Its automatic mode allows precise control of the battery state: LED off for off, LED on for on. The Emergency Parallel function is a major safety feature: in case of a discharged starting battery, the user can activate a temporary 10-minute parallel connection to start the engine. This timer prevents any oversight and protects service batteries. Unlike the 720-MD-EP model, which only offers on\/off switching, the 720-MDO provides an additional backup function without requiring complex wiring.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and robustness\u003c\/h3\u003e\n\u003cp\u003eWith a continuous rating of 500 A, an intermittent rating of 700 A, and a cranking current of 2500 A, this battery switch is perfectly suited for high-power engines. Its tinned copper and stainless steel construction, combined with an IP65 protection rating, ensures excellent resistance to corrosion and humid marine environments. The operating voltage range is 8 to 32 V DC, making it compatible with 12 V and 24 V systems, provided both batteries are of the same voltage. The housing can be flush-mounted or surface-mounted, offering great installation flexibility.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and connectivity\u003c\/h3\u003e\n\u003cp\u003eThe 720-MDO connects via two 12 mm studs (1\/2 inch) for the main circuit and a 7-wire control harness. The recommended tightening torque is 18 Nm (maximum 25 Nm). Its UL 1107 certification (ignition protection) makes it safe for installation in engine compartments. Compared to competitors such as Blue Sea Systems remote switches, the BEP 720-MDO stands out with its timed Emergency Parallel function and low standby power consumption (5 mA at 12 V).\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721061908820,"sku":"720-MDO","price":226.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/b303i3zq_img-01.jpg?v=1778055625"},{"product_id":"bep-coupe-batterie-motorise-500a-parallele-urgence","title":"Remote parallel emergency battery cut-off 500 A 32 V","description":"\u003cp\u003eThe BEP 720-MDO-EP motorized battery switch is designed for advanced battery bank management on vessels requiring high electrical reliability. This high-capacity model features an emergency parallel function (Emergency Parallel), remotely controllable. Unlike manual battery switches in the BEP 700 series, this model allows temporary coupling of battery banks for 10 minutes via a remote switch, providing an immediate solution in case of starter battery failure. A continuous 6-second press on the control disables this function manually.\u003c\/p\u003e\n\u003ch3\u003eElectrical performance and capacities\u003c\/h3\u003e\n\u003cp\u003eDesigned to integrate with 12V or 24V systems (with a motor operating range of 8 to 32V DC), this switch supports a continuous current of 500A, an intermittent current of 700A, and a starting capacity reaching 2500A. Its electrical consumption is strictly optimized to preserve batteries: it is limited to 5mA at 12V in off position, and 8mA in automatic mode. The internal high-voltage contacts can withstand up to 50V DC for load switching, offering a large safety margin.\u003c\/p\u003e\n\u003ch3\u003eRobust design and installation\u003c\/h3\u003e\n\u003cp\u003eThe 720-MDO-EP construction meets the most demanding marine standards. It is UL 1107 certified (protection against ignition) and has an IP65 ingress protection rating against water and dust ingress. Power transfer is via two robust 12 mm (1\/2 inch) tinned copper studs, requiring a recommended tightening torque of 18 Nm. The control circuit wiring is greatly simplified by the use of Wago quick-connect terminals. The unit can be surface-mounted or flush-mounted, perfectly adapting to the space constraints of modern electrical panels.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721063973204,"sku":"720-MDO-EP","price":222.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/b303j4jq_img-01.jpg?v=1778055662"},{"product_id":"bep-720-mdvso-coupleur-separateur-batterie-12-24v-500a","title":"Battery coupler 720-MDVSO BEP","description":"\u003cp\u003eThe \u003cstrong\u003e720-MDVSO\u003c\/strong\u003e battery separator coupler from \u003cstrong\u003eBEP\u003c\/strong\u003e represents a major evolution in onboard energy management. Designed to replace the older 720-MDVS and 720-MDVS-24V models, this voltage-sensitive switch (VSS) now features automatic 12\/24V dual-voltage detection, eliminating the need for manual configuration. Its design is based on advanced digital circuitry combined with an optical position sensor, ensuring increased precision and efficiency during battery bank coupling and decoupling cycles.\u003c\/p\u003e\n\n\u003ch3\u003eElectrical performance and optimized thresholds\u003c\/h3\u003e\n\u003cp\u003eThis module supports extreme loads with a continuous capacity of 500A, 700A intermittently, and up to 2500A at startup. Unlike the previous generation, the 720-MDVSO lowers its activation voltage to 13.3V (26.6V for 24V systems) after a 5-second delay, making it perfectly suited for low-efficiency alternators and high-temperature environments. The cutoff voltage is set at 12.7V (25.4V) with a 20-second delay to prevent oscillations. Additionally, standby power consumption has been drastically reduced by 70%, dropping to less than 5mA at 12V.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and marine safety\u003c\/h3\u003e\n\u003cp\u003eSystem integration is simplified by robust power connections via two 12 mm tinned copper studs and a 3-wire control harness equipped with a Wago plug. Certified to IP65 and ignition-protected according to UL 1107, the high-temperature fiberglass-reinforced plastic housing withstands the most severe marine conditions. The system also offers a remote emergency parallel function for 10 minutes, along with a full manual override control for absolute safety onboard.","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721065152852,"sku":"720-MDVSO","price":205.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/b303k2xg_img-01.jpg?v=1778055707"},{"product_id":"bep-selecteur-batterie-721-350a","title":"Battery selector 350 A","description":"\u003cp\u003eThe \u003cstrong\u003eBEP 721 battery selector\u003c\/strong\u003e is a robust switch designed for battery management in marine environments and recreational vehicles. With a continuous capacity of 350A and a peak of 1500A at startup, it is perfectly suited for large diesel engines and demanding electrical systems. This selector offers 4 positions (Off, 1, 1+2, 2) to manage two battery banks, providing total flexibility for load distribution and charging sources.\u003c\/p\u003e\n\n\u003ch3\u003eRobust design for marine use\u003c\/h3\u003e\n\u003cp\u003eThe BEP 721 stands out for its robust design, including self-cleaning sliding contacts that ensure reliability and increased longevity. It is flame-resistant, making it safe for installation in engine compartments. Its tinned copper M10 (3\/8 inch) terminals provide a reliable connection and optimal conductivity. Unlike more compact models such as the BEP 710 (300A continuous), the 721 offers an additional safety margin for the most demanding installations.\u003c\/p\u003e\n\n\u003ch3\u003eOptimized installation and safety\u003c\/h3\u003e\n\u003cp\u003eThis selector is designed for flexible installation, with removable side panels and a rear cover insulating the terminals against short circuits. It can be surface-mounted or flush-mounted. For maximum safety, the switch can be locked with a padlock, completely isolating the electrical circuit. Its modular design allows easy integration with other distribution products in the BEP range.","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721065480532,"sku":"721","price":122.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/fvdc46fn_721_HR.jpg?v=1778055748"},{"product_id":"bep-smart-battery-hub-commutateur-batterie-12v-24v-300a-nmea2000","title":"Remote-controlled parallel emergency battery switch 12\/24 V 275 A","description":"\u003cp\u003e\n    The \u003cstrong\u003eBEP Smart Battery Hub\u003c\/strong\u003e is an advanced battery management solution designed to optimize the performance and longevity of your 12V or 24V battery banks. This centralized system integrates a remote-controlled battery switch, a bidirectional configurable voltage-sensitive switch (VSS), and NMEA 2000 connectivity for seamless integration into modern marine electronic networks. With a continuous current capacity of 300 A, an intermittent current of 700 A, and a starting current of 1450 A, it outperforms traditional battery switches by offering intelligent management and robust overload capabilities.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSmart Battery Hub\u003c\/strong\u003e stands out for its ability to precisely monitor battery voltage, the current draw of the house bank, and its full state of charge (SOC). Engine battery monitoring is limited to voltage only, providing essential oversight. Equipped with an internal temperature sensor, it contributes to accurate state-of-charge calculations and transmits this data via the NMEA 2000 battery temperature PGN. Its low power consumption, under 5 mA in sleep mode, is a major advantage for standalone systems.\n\u003c\/p\u003e\n\u003cp\u003e\n    NMEA 2000 connectivity (1 Micro-C port, 1 LEN) allows the \u003cstrong\u003eSmart Battery Hub\u003c\/strong\u003e to broadcast various PGNs, including fluid levels, pressure, temperature, battery voltage, and state of charge. It also features a USB port for firmware updates. In standalone mode, it transmits simple DC status messages. Compared to dedicated CZone modules, the Smart Battery Hub offers an integrated and streamlined solution, particularly suited for installations requiring intelligent management without the complexity of a full CZone system, while still allowing CZone integration via a dedicated dipswitch. The range includes variants such as the Smart Battery Hub Twin Engine (80-716-0030-00) and the Smart Battery Hub Triple Engine (80-716-0031-00), offering configurations tailored for multiple engine architectures.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobustness and Configuration\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for the marine environment, the \u003cstrong\u003eBEP Smart Battery Hub\u003c\/strong\u003e features an IPX7 ingress protection rating, ensuring water resistance. It complies with CE, ABYC, NMEA, ISO8846\/SAEJ1171 (Ignition Protected), FCC Class B, and RoHS standards. Its operating temperature range is from -15°C to +55°C, and storage temperature from -40°C to +85°C. Configuration is performed via dipswitches, allowing the setting of safety locks for the VSS function and emergency parallel, as well as the configuration of the house battery or CZone device address. It includes three inputs for Master switch, two analog inputs (0-30V, 0-1000 Ohm, 4-20mA), and one input for an external battery temperature sensor, providing extensive integration flexibility.\n\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721292628308,"sku":"80-701-0018-00","price":146.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/u2occ8c2_80-701-0018-00_800x_4f17278c-0b0b-459f-8f6e-ae69f914ccc0.webp?v=1778072960"},{"product_id":"bep-smart-battery-hub-twin-engine-275a","title":"Smart Battery Hub Twin Engine","description":"\u003cp\u003eThe \u003cstrong\u003eSmart Battery Hub Twin Engine\u003c\/strong\u003e by \u003cstrong\u003eBEP\u003c\/strong\u003e is an advanced energy management solution specifically designed for twin-engine vessels. This hub centralizes the switching of starter and service batteries using motorized switches controllable remotely. By installing this module close to the battery banks, it significantly reduces the length and cross-section of power cables required to the starters, providing weight savings, reduced voltage drops, and substantial copper savings.\u003c\/p\u003e\n\n\u003ch3\u003eElectrical performance and robustness\u003c\/h3\u003e\n\u003cp\u003eBuilt for the most demanding marine environments, this motorized switching hub supports a maximum voltage of 32V DC. It can deliver a continuous current of 275 A, an intermittent current of 455 A, and withstands up to 1250 A during critical engine start phases. Power consumption is tightly controlled, with only 15 mA drawn when the system is in the off position. Power connections are made securely on 10 mm (3\/8\") tinned copper studs, recommended for cables up to 50 mm² (or 70 mm² with strain relief). The housing is certified ignition-protected, ensuring total safety even in confined engine compartments.\u003c\/p\u003e\n\n\u003ch3\u003eNetwork integration and scalability\u003c\/h3\u003e\n\u003cp\u003eUnlike traditional manual battery clusters, the \u003cstrong\u003eSmart Battery Hub Twin Engine\u003c\/strong\u003e fits into a connected boat logic. It works in tandem with remote key control panels and integrates seamlessly with advanced digital ecosystems like CZone. It is part of BEP’s complete range of remote switching clusters, offering the same capabilities and mounting options as standard switches, while strategically positioning itself between the Single Engine and Triple Engine models. Installation is flexible, allowing surface or flush mounting depending on the vessel’s technical configuration.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":55721402925396,"sku":"80-716-0030-00","price":1416.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/b303h42g_img-01.jpg?v=1778056519"},{"product_id":"victron-energy-batteryprotect-220a-protection-batterie-marine","title":"BatteryProtect 220A","description":"\u003cp\u003e\n    Victron Energy’s BatteryProtect 220A is a battery protection device designed to disconnect non-essential loads before a full discharge, preventing battery damage or leaving insufficient power to start the engine. This model is the most powerful in the range, surpassing the BatteryProtect BP-65 (65A) and BP-100 (100A) with its ability to handle a maximum continuous load current of 220A and a peak current of 600A for 30 seconds. It is suitable for 12V and 24V systems thanks to its automatic voltage detection function. The BatteryProtect comes with a pre-assembled DC ground connector and cable.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and advanced protection\u003c\/h3\u003e\n\u003cp\u003e\n    This device features easy programming via a 7-segment LED display, allowing configuration of disconnection and reconnection thresholds. A specific setting is available for Li-ion batteries, where the BatteryProtect can be controlled by an external BMS such as the VE.Bus BMS or the Lynx Smart BMS. In Li-ion mode, disconnection is immediate if the BMS signal becomes floating. Its current draw is ultra-low, at 1.5 mA in operation and 0.6 mA in standby or after a low-voltage cutoff, which is critical for Li-ion batteries. For sensitive load protection, it disconnects the load if the DC voltage exceeds 16V (for a 12V system) or 32V (for a 24V system).\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust design and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The BatteryProtect 220A is fireproof thanks to the use of MOSFET switches instead of relays, eliminating sparks. It offers a timed alarm output, activated after 12 seconds if the battery voltage drops below the predefined disconnection level, preventing false alarms at engine start. Load disconnection is also timed at 90 seconds after alarm activation, and reconnection occurs 30 seconds after the battery voltage exceeds the reconnection threshold. Its electronics are protected to IP67 (submersible), while the connections are IP00. It supports an operating voltage range of 6 to 35V and a temperature range of -40°C to +40°C at full load (up to 60% of rated load at 50°C). Connections are made via M8 terminals with a mounting torque of 9 Nm. Its dimensions are 62 x 123 x 120 mm and it weighs 0.8 kg.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786769088852,"sku":"BPR110048000","price":109.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-BPR000220400-BatteryProtect-12-24V-220A-front.jpg?v=1778603947"},{"product_id":"victron-energy-batteryprotect-12-24v-100a-sectionneur-batterie","title":"BatteryProtect 12\/24V-100A","description":"\u003cp\u003e\n    The Victron Energy BatteryProtect 12\/24V-100A is an essential protection device designed to preserve battery life and ensure power availability for critical loads. It automatically disconnects non-essential consumers before the battery is fully discharged, preventing irreversible damage or insufficient power to start the engine. This model is positioned as an intermediate solution in the BatteryProtect range, offering a maximum continuous current of 100A, higher than the BP-65 (65A) and suitable for medium-power installations, while being more compact than the BP-220 (220A).\n\u003c\/p\u003e\n\u003ch3\u003eKey Features and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    This BatteryProtect features automatic voltage detection (12V or 24V), simplifying initial installation. Programming is easily done via a 7-segment LED display, allowing you to set disconnection and reconnection thresholds. A specific mode for Li-ion batteries is available, enabling direct control by a VE.Bus BMS for optimized discharge management. In terms of consumption, the device draws an ultra-low 1.5 mA in operation and only 0.6 mA in standby or low-voltage cut-off mode, which is crucial for Li-ion battery-powered systems. It includes overvoltage protection, disconnecting the load if the DC voltage exceeds 16V (for a 12V system) or 32V (for a 24V system) to protect sensitive equipment. Its design uses MOSFET switches instead of relays, ensuring spark-free operation and increased safety (ignition proof).\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Advanced Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The BatteryProtect 12\/24V-100A offers intelligent alarm and disconnection management. A timed alarm output activates if the battery voltage drops below the disconnection threshold for more than 12 seconds, preventing false alarms caused by engine start-up. Load disconnection is also timed (90 seconds after the alarm), with reconnection after 30 seconds if the voltage recovers. Default thresholds are 10.5V or 21V for disconnection and 12V or 24V for reconnection. It supports a peak current of 600A for 30 seconds and operates within a voltage range of 6 to 35V. The electronics are rated IP67 (potting), ensuring protection against temporary immersion, while the connections are IP00. Its dimensions are 59 x 42 x 115 mm with a weight of 0.5 kg, featuring M8 connections. It is important to note that this device is unidirectional and not designed for reverse currents from charging sources, nor for direct connection of inverters or charger\/inverters via their DC inputs, which must be controlled via their remote port. Unlike the Smart BatteryProtect version, programming for this model is done manually via the PROG pin to GND.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786840359252,"sku":"BPR110022000","price":55.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-BPR000100400-BatteryProtect-12-24V-100A-front.jpg?v=1778604731"},{"product_id":"victron-energy-batteryprotect-12-24v-65a-protection-batterie","title":"BatteryProtect 12\/24V 65A","description":"\u003cp\u003e\n    The Victron Energy BatteryProtect 12\/24V 65A is a battery protection device designed to disconnect non-essential loads before a full discharge, preventing battery damage or loss of power to start the engine. This model is a compact solution for systems requiring a maximum continuous current of 65A, with a peak current of 250A for 30 seconds. It is part of the BatteryProtect range, which also includes the BP-100 (100A continuous, 600A peak) and BP-220 (220A continuous, 600A peak) models, offering flexibility for various marine and vehicle installation configurations.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features and adaptability\u003c\/h3\u003e\n\u003cp\u003e\n    The BatteryProtect 12\/24V 65A automatically detects system voltage (12V or 24V) and offers easy programming via a 7-segment LED display, allowing configuration of disconnection and reconnection thresholds. A specific function is dedicated to Li-ion batteries, enabling direct control by an external BMS such as the VE.Bus BMS, where the BatteryProtect acts as a charge switch. This versatility sets it apart from more basic solutions that do not offer Li-ion mode or automatic voltage detection. Its current consumption is ultra-low (1.5 mA when running, 0.6 mA when off or during low-voltage cutoff), a key advantage for standalone systems. The device includes overvoltage protection, disconnecting the load if DC voltage exceeds 16V (for a 12V system) or 32V (for a 24V system).\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Safety is enhanced by the use of MOSFET switches without relays, ensuring spark-free operation (ignition proof). The alarm output is timed for 12 seconds before activation, preventing false triggers during engine start-up. This open-collector output, short-circuit protected, can activate an alarm buzzer, LED, or relay (max. 50 mA). Load disconnection is also timed (90 seconds after the alarm), and reconnection occurs 30 seconds after the battery voltage exceeds the reconnection threshold. The electronics are rated IP67 (potted), providing immersion protection, while the connections are IP00. This model comes with a pre-assembled DC negative connector and cable, simplifying installation. It is not designed to handle reverse currents from charging sources.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786901111124,"sku":"BPR065022000","price":43.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-BatteryProtect-12-24V-65A-front.jpg?v=1778605430"},{"product_id":"victron-energy-batteryprotect-48v-100a-protection-batterie","title":"BatteryProtect 48V-100A","description":"\u003cp\u003e\n    The Victron Energy BatteryProtect 48V-100A is a battery protection solution designed for 48V systems. It disconnects non-essential loads before the battery is fully discharged, preventing damage and ensuring sufficient capacity for engine starting. This model differs from Smart BatteryProtect versions by its programming via a PROG pin to GND, facilitated by a 7-segment LED display, allowing selection from multiple engagement and disconnection voltage thresholds.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Performance and Built-in Safety\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for a voltage range of 24 to 64V, this BatteryProtect offers overvoltage protection by disconnecting the load if continuous voltage exceeds 64V. Its design includes MOSFET switches, ensuring \"ignition proof\" operation without sparks. Current consumption is ultra-low, with 2 mA in active mode and 1.5 mA in standby or after a low-voltage cutoff, an advantage for Li-ion battery installations. It handles a maximum continuous charge current of 100A and a peak current of 250A. The device is unidirectional; current must flow from the IN terminal to the OUT terminal. It is not designed for reverse currents from charging sources.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Advanced Management\u003c\/h3\u003e\n\u003cp\u003e\n    The BatteryProtect 48V-100A features a specific setting for Li-ion batteries, allowing direct control by an external BMS such as the VE.Bus BMS. The alarm output is activated after 12 seconds of low voltage, not triggered by engine start. This open-collector output, short-circuit resistant (max. 50 mA), can drive a buzzer or indicator light. The load disconnection delays (90 seconds after alarm, immediate if controlled by the VE.Bus BMS) and reconnection delays (30 seconds after voltage increase) are optimized for system stability. Default thresholds are 42V for disconnection and 48V for engagement. The electronics are protected by an encapsulated housing (IP67), while the connections (M8) are IP00. Its dimensions are 62 x 123 x 120 mm with a weight of 0.8 kg. A pre-assembled DC negative cable connector is included.\n\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55786992501076,"sku":"BPR048100400","price":91.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero-BatteryProtect-48V-100A-front-angle.jpg?v=1778606456"},{"product_id":"blue-sea-selecteur-batterie-hd-series-3-positions-afd","title":"Battery selector switch HD-Series heavy-duty 3-position with AFD","description":"\u003cp\u003e\n    Designed for demanding marine electrical systems, the BLUE SEA HD-Series Heavy Duty 3-position battery selector switch with AFD, part number 11003, allows selection between two isolated battery banks (OFF, 1 or 2) for power supply or emergency starting. Part of the HD (Heavy Duty) series, it differs from the m-Series (300A continuous) and e-Series (350A continuous) by its ability to handle higher currents, with a continuous rating of 500A, an intermittent rating of 700A (5 min), and a starting current of 1,600A (30 sec). This positioning makes it suitable for applications requiring enhanced electrical robustness, particularly for large diesel engines and high-consumption systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced protection and robust connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    One of the technical features of the 11003-BSS selector switch is its Alternator Field Disconnect (AFD) function, which protects the alternator diodes from destructive overvoltages if the switch is toggled to the OFF position while the engine is running. This safety is critical for equipment longevity. The device also features \"Make-Before-Break\" contact design, allowing seamless switching between battery banks without interrupting power supply—a key feature for sensitive electronic equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarine design and regulatory compliance\u003c\/h3\u003e\n\u003cp\u003e\n    The terminals, made of tinned copper, are sized M12-1.75 (1\/2\") and offer a length of 22.22 mm (7\/8\") to accommodate multiple cable lugs. Their one-piece design reduces the risk of overheating and loosening over time. The recommended tightening torque is 24.86 N·m (220 in-lb). The selector switch accepts 4\/0 AWG (120 mm²) battery cables to meet its rated values, with the option to connect two cables to the common terminal to meet the assigned value. Its design allows for surface or rear-panel mounting, with mounting holes accepting 1\/4\" (M6) screws. The 11003-BSS model complies with ABYC requirements, is UL Listed (UL 1107), UL 1500, and SAE J1171 for ignition protection, and is CE marked per ISO 8846, ensuring safe use in marine environments. It also features IP66 protection against water and dust intrusion.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55861128593748,"sku":"11003-BSS","price":118.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_HD-Series_Heavy_Duty_3_Position_Selector_Battery_Switch_with_AFD_11003-BSS_-_Ref_d9ed9b1b.jpg?v=1779202824"},{"product_id":"blue-sea-hd-series-coupe-batterie-on-off-heavy-duty","title":"HD-Series Heavy Duty On-Off battery switch","description":"\u003cp\u003e\n    Designed for demanding marine environments, the BLUE SEA HD-Series Heavy Duty On-Off battery switch (PN 3000) provides robust power management. This single-circuit battery switch is suitable for high-current applications, such as large diesel engines. It allows disconnecting a single battery or a battery bank for safety or maintenance purposes.\n\u003c\/p\u003e\n\n\u003ch3\u003eHigh Current Capabilities and Robust Construction\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eHD-Series 3000-BSS battery switch\u003c\/strong\u003e stands out with its high current ratings: a 1,750 A cranking current for 30 seconds, a 900 A intermittent current for 5 minutes, and a continuous current of 500 A. It supports a maximum voltage of 32 V DC. Its M12-1.75 (1\/2\") tinned copper terminals ensure maximum conductivity and excellent corrosion resistance. The BLUE SEA one-piece terminal stud design guarantees stable and durable connections, preventing loosening over time. These 22.22 mm (7\/8\") long terminals can accommodate multiple cable lugs and accept battery cables up to 4\/0 AWG (120 mm²).\n\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Flexible Installation\u003c\/h3\u003e\n\u003cp\u003e\n    This switch is certified for ignition protection per UL 1500 and SAE J1171, making it safe for gasoline-powered boats. It is also UL 1107 listed and meets ABYC requirements for battery switches. Its IP66 rating ensures resistance to dust and powerful water jets. The housing design allows surface or rear-panel mounting, offering installation flexibility. Unlike BLUE SEA’s m-Series (300 A continuous, 48 V DC) and e-Series (350 A continuous, 48 V DC), the HD-Series is specifically sized for the higher current demands of installations with large diesel engines, though its maximum voltage is limited to 32 V DC.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55861135442260,"sku":"3000-BSS","price":98.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_HD-Series_Heavy_Duty_On-Off_Battery_Switch_3000-BSS_-_Ref_0f95e660.jpg?v=1779202974"},{"product_id":"blue-sea-hd-series-selecteur-coupe-batterie","title":"HD-Series reinforced battery selector","description":"\u003cp\u003e\n    The Blue Sea Systems HD-Series 3002-BSS battery selector is an electrical management component designed for demanding marine installations. With a continuous rating of 500 A, it is suitable for large diesel engines and high-consumption systems, positioning itself above the brand’s m-Series (300 A continuous) and e-Series (350 A continuous) ranges. It supports a cranking rating of 1,600 A for 30 seconds and an intermittent rating of 700 A for 5 minutes, all at a maximum voltage of 32 V DC.\n\u003c\/p\u003e\n\u003ch3\u003eSafety and Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    This selector features a \"Make-Before-Break\" contact design, allowing switching between battery banks without interrupting power to equipment. The M12-1.75 (1\/2\") tinned copper studs, 22.22 mm (7\/8\") long, ensure maximum conductivity and high corrosion resistance while accommodating multiple 4\/0 AWG (120 mm²) cable lugs. The recommended tightening torque for these studs is 24.86 N·m (220 in-lb).\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    The 3002-BSS housing is designed for versatile mounting, either surface or rear-panel. It fully complies with American Boat and Yacht Council (ABYC) requirements for battery switches, is UL 1107 listed for electrical power switches, and meets UL 1500 and SAE J1171 standards for external ignition protection, making it safe for installation on gasoline-powered boats. Its IP66 rating ensures protection against dust and powerful water jets, guaranteeing reliability in marine environments.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55861139013972,"sku":"3002-BSS","price":96.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_HD-Series_Heavy_Duty_Selector_Battery_Switch_3002-BSS_-_Ref_db554fd5.jpg?v=1779202998"},{"product_id":"blue-sea-hd-series-selecteur-batterie-500a-afd","title":"Battery isolator HD-Series heavy-duty selector switch with AFD","description":"\u003cp\u003e\n    Designed for demanding marine electrical systems, the \u003cstrong\u003eHD-Series Heavy Duty Selector Battery Switch with AFD\u003c\/strong\u003e from Blue Sea Systems, part number 3003-BSS, provides robust and secure battery bank management. This model is specifically designed to operate on large diesel engines requiring high power output and low heat generation.\n\u003c\/p\u003e\n\u003ch3\u003eElectrical performance and durability\u003c\/h3\u003e\n\u003cp\u003e\n    The 3003-BSS offers high electrical specifications: a starting capacity of 1,600 amperes (30 sec), an intermittent capacity of 700 amperes (5 min), and a continuous capacity of 500 amperes. It is designed for a maximum operating voltage of 32V DC. These values clearly position it above Blue Sea Systems' m-Series (300A continuous) and e-Series (350A continuous) ranges, which are intended for outboard motors and medium-sized gasoline or diesel inboard engines. The tinned copper terminals of type M12-1.75 (1\/2\") ensure maximum conductivity and corrosion resistance. Their length of 22.22 mm (7\/8\") allows multiple cable terminals to be accommodated, with a recommended tightening torque of 24.86 N·m (220 in-lb). The selector is compatible with battery cables up to 4\/0 AWG (120 mm²).\n\u003c\/p\u003e\n\u003ch3\u003eSafety and advanced features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eHD-Series 3003-BSS battery selector\u003c\/strong\u003e integrates the Alternator Field Disconnect (AFD) function, which protects the alternator diodes in case the switch is turned off while the engine is running. Its \"Make-Before-Break\" design is essential for maintaining continuous power supply to critical systems when switching between battery banks. The housing allows for surface or rear-panel mounting. This product fully complies with ABYC standards for battery switches, is UL 1107 listed for electrical power switches, and meets external ignition protection requirements per UL 1500 and SAE J1171, making it safe for installations on gasoline-powered boats. It also features IP66 protection, ensuring resistance to dust and intense water spray. Blue Sea Systems' one-piece terminal stud design ensures a stable and durable connection, eliminating the risk of loosening over time. A tactile indicator allows the knob position to be identified by touch, useful in low-light conditions. This 4-position selector allows selection between battery 1, battery 2, or combining both (1+2) for charging or emergency starting, offering superior flexibility compared to 3-position or ON-OFF models.","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55861139669332,"sku":"3003-BSS","price":113.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_HD-Series_Heavy_Duty_Selector_Battery_Switch_with_AFD_3003-BSS_-_Ref_7c8a9884.jpg?v=1779203024"},{"product_id":"blue-sea-coupe-batterie-m-series-mini-on-off-cle","title":"Battery switch on\/off mini m-Series with key - red","description":"\u003cp\u003e\n    Designed for marine electrical systems of small outboard and diesel engines, the \u003cstrong\u003eBLUE SEA\u003c\/strong\u003e m-Series Mini On-Off 6005-BSS battery switch provides reliable power management. This single-circuit ON\/OFF switch can handle continuous current of 300A at 48V DC, with a 900A cranking capacity for 30 seconds and intermittent current of 500A for 5 minutes. It is optimized for applications where space is a limiting factor.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The 6005-BSS features tinned copper terminals of 3\/8\"-16 (M10) for maximum conductivity and enhanced corrosion resistance. The one-piece terminal stud design ensures a stable connection that does not loosen over time. For flexible integration, the switch offers multiple mounting options: surface, front panel, or rear panel, with a three-section removable insulating cover that protects the rear contacts while allowing easy cable access from any direction.\n\u003c\/p\u003e\n\u003ch3\u003eSafety and compliance\u003c\/h3\u003e\n\u003cp\u003e\n    This model is \"Ignition Protected\" certified, making it safe for installation on gasoline-powered boats. Its durability is ensured by a durable reinforced polycarbonate construction and non-corrosive marine-grade metals. The \u003cstrong\u003eBLUE SEA\u003c\/strong\u003e m-Series Mini 6005-BSS switch complies with American Boat and Yacht Council (ABYC) requirements for battery switches, is UL 1107 listed for electrical power switches, and meets UL 1500 and SAE J1171 standards for external ignition protection. It is also CE and ISO 8846 certified and has an IP66 ingress protection rating, protecting against dust and powerful water jets.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning in the range\u003c\/h3\u003e\n\u003cp\u003e\n    The 6005-BSS is positioned as a compact and economical solution within the \u003cstrong\u003eBLUE SEA\u003c\/strong\u003e range. It is ideal for small to medium-sized systems, distinguishing itself from the e-Series models (350A continuous) designed for inboard gasoline or diesel engines, and the robust HD-Series (up to 600A continuous) intended for large diesel engines. This m-Series is specifically adapted for managing a single battery to a load bank, offering a targeted alternative for less complex electrical needs or as an auxiliary switch in more elaborate configurations.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Key \/ Red","offer_id":55861145764180,"sku":"6005-BSS","price":32.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_m-Series_Mini_On-Off_Battery_Switch_with_Key_-_Red_6005-BSS_-_Ref_60d903ae.jpg?v=1779203253"},{"product_id":"blue-sea-coupe-batterie-m-series-mini-on-off-noir","title":"Battery switch mini m-Series ON\/OFF with button - black","description":"\u003cp\u003e\n    Designed for single-battery circuit management on outboards and small gasoline or diesel engines, the BLUE SEA m-Series Mini ON\/OFF battery switch (reference 6006200-BSS) provides a compact and marine-compliant disconnection solution. This model is specifically sized for applications requiring a continuous capacity of 300 amperes DC, an intermittent current of 500 amperes for 5 minutes, and a starting current of 900 amperes for 30 seconds.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The m-Series Mini features 3\/8\" (M10) tinned copper studs for maximum conductivity and corrosion resistance. The one-piece stud design eliminates the risk of loosening over time. It accepts battery cables up to 4\/0 AWG (120 mm²) to achieve its rated capacities, with a recommended tightening torque of 13.56 N·m (120 in-lb). Its maximum operating voltage is 48 volts DC. The IP66 rating ensures resistance to dust and intense water spray, making it suitable for demanding marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    This battery switch is certified for ignition protection per UL 1500 and SAE J1171 standards, making it safe for installation on gasoline-powered motorboats. It also meets ABYC requirements for battery switches and is UL 1107 listed for electrical power switches. An insulating cover with three detachable side pieces protects the rear contacts and allows wire access from any direction. The removable button enables service locking and prevents accidental activation.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and Mounting Options\u003c\/h3\u003e\n\u003cp\u003e\n    BLUE SEA’s m-Series is positioned as the entry-level battery switch, with a continuous capacity of 300A suitable for light-duty applications. It differs from the e-Series (350A continuous, for inboard engines) and HD-Series (up to 600A continuous, for large diesel engines) with its compact size and lower capacity. The housing offers versatile mounting options: surface, front panel, or rear panel, facilitating integration into tight spaces. The button provides tactile feedback for easy use, even in the dark.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Button \/ Black","offer_id":55861146616148,"sku":"6006200-BSS","price":34.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_m-Series_Mini_On-Off_Battery_Switch_with_Knob_-_Black_6006200-BSS_-_Ref_e1415f3f.jpg?v=1779203281"},{"product_id":"blue-sea-m-series-mini-selector-coupe-batterie-rouge","title":"Battery switch selector mini m-Series - red","description":"\u003cp\u003e\n    Designed for managing two battery banks, the BLUE SEA m-Series Mini Selector 6007 battery switch is a compact solution for marine electrical systems. It is suitable for outboards and low-power gasoline or diesel engines, with a continuous capacity of 300 amperes, an intermittent capacity of 500 amperes for 5 minutes, and a starting capacity of 900 amperes for 30 seconds.\n\u003c\/p\u003e\n\u003ch3\u003eFeatures and performance\u003c\/h3\u003e\n\u003cp\u003e\n    This 4-position switch allows selection between battery 1, battery 2, both battery banks combined (1+2), or the OFF position. Its \"make-before-break\" design ensures switching without interrupting power supply, which is relevant for the stability of electrical systems. The 3\/8\"-16 (M10) tinned copper studs provide conductivity and corrosion resistance for reliable connections. They accept cables up to 4\/0 AWG (120 mm²), meeting current requirements.\n\u003c\/p\u003e\n\u003ch3\u003eSafety and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The 6007-BSS is UL 1107 certified and compliant with ABYC requirements for battery switches. It is also ignition protected according to UL 1500 and SAE J1171 standards, allowing safe installation in engine compartments of gasoline-powered boats. Its IP66 rating ensures protection against dust and intense water splashes, guaranteeing reliability in marine environments. Compared to BLUE SEA’s e-Series (350A) or HD-Series (600A) ranges, the m-Series is sized for the electrical needs of smaller boats. Its ultra-compact design and surface, front, or rear panel mounting options facilitate integration into confined spaces. The removable rear protective insulator simplifies cable access from multiple directions, and the removable knob offers a service lock function.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55861146976596,"sku":"6007-BSS","price":43.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_m-Series_Mini_Selector_Battery_Switch_-_Red_6007-BSS_-_Ref_8378a4f2.jpg?v=1779203304"},{"product_id":"blue-sea-m-series-mini-dual-circuit-coupe-batterie-noir","title":"Dual-circuit mini m-Series battery switch - black","description":"\u003cp\u003e\n    Designed for marine electrical systems requiring isolated management of two battery banks, the BLUE SEA m-Series Mini Dual Circuit battery switch (reference 6010200-BSS) provides a compact and high-performance solution. This model allows simultaneous switching of two battery banks or isolated circuits and can also be used to switch positive and negative conductors depending on application requirements. Its design is particularly suited to outboard motors and small gasoline or diesel engines.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The m-Series Mini Dual Circuit offers a continuous current capacity of 300A DC per circuit, with an intermittent capacity of 450A DC per circuit (for 5 minutes) and a starting capacity of 675A DC per circuit (for 30 seconds). It supports a maximum operating voltage of 32 Volts DC. The terminal studs are made of tinned copper for maximum conductivity and corrosion resistance, accepting 3\/8\" (M10) ring terminals. Their one-piece design ensures a stable connection over time. The recommended torque for terminals is 13.56 N·m (120 in-lb), and wiring must use 4\/0 AWG (120 mm²) cables to meet rated capacities.\n\u003c\/p\u003e\n\u003ch3\u003eCompliance and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    This battery switch is \"Ignition Protected\", compliant with UL 1500 and SAE J1171 standards, making it safe for installation in engine compartments of gasoline-powered boats. It is also UL 1107 listed for electrical power switches and meets all American Boat and Yacht Council (ABYC) requirements for battery switches. Its IP66 protection rating ensures resistance to dust and powerful water jets, including green water. The housing design allows multiple mounting options: surface, front panel, or rear panel. An insulating cover with removable side pieces protects rear contacts and facilitates cable access from all directions. The removable knob adds a safety and locking function for maintenance. Unlike Dual Circuit Plus models, this battery switch does not include an emergency battery combining function, focusing instead on bank isolation. It sits within the BLUE SEA m-Series range, designed for low to medium power applications, distinguishing it from the e-Series (350A continuous for inboard engines) and HD-Series (up to 600A continuous for large diesels).\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black","offer_id":55861147926868,"sku":"6010200-BSS","price":52.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_m-Series_Mini_Dual_Circuit_Battery_Switch_-_Black_6010200-BSS_-_Ref_4fcc4ac9.jpg?v=1779203331"},{"product_id":"blue-sea-m-series-mini-dual-circuit-plus-coupe-batterie","title":"Dual-circuit battery switch Plus™ Mini m-Series - red","description":"\u003cp\u003e\nThe BLUE SEA m-Series Mini Dual Circuit Plus™ battery switch (model 6011) is a compact and robust solution designed for efficient management of two isolated battery banks. Ideally suited for outboards and small gasoline or diesel engines, this switch offers a continuous rating of 300A DC per circuit, with a 675A DC cranking current for 30 seconds and an intermittent current of 450A DC for 5 minutes. Its Dual Circuit Plus™ functionality allows simultaneous switching of two battery banks to all loads, or combining them for increased power needs or emergency situations.\u003c\/p\u003e\n\u003cp\u003e\nThis model features 3\/8\"-16 (M10) tinned copper studs, ensuring maximum conductivity and excellent corrosion resistance in marine environments. The one-piece stud design guarantees stable and reliable long-term connections. An insulating housing with three removable side sections protects the rear contacts and facilitates cable access, allowing flexible wire routing in all directions.\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and Blue Sea Systems Range\u003c\/h3\u003e\n\u003cp\u003e\nBlue Sea Systems' m-Series is positioned as the most compact option in the brand's lineup, particularly suited for installations where space is a major constraint. With its 300A continuous rating, it is specifically designed for outboard engines and small heat engines. It differs from higher-end ranges like the e-Series, which offers a 350A continuous rating for gasoline or diesel inboard engines, and the HD-Series, designed for large diesel engines with ratings up to 600A. Model 6011, with its Dual Circuit Plus™ function, allows flexible battery management, isolating starting and service circuits while offering a combine function for emergency situations, ensuring optimal preservation of the starting battery and protection of sensitive electronic equipment.\u003c\/p\u003e\n\n\u003ch3\u003eCompliance and Technical Installation\u003c\/h3\u003e\n\u003cp\u003e\nThis battery switch meets ABYC requirements for battery switches and is UL 1107 listed. It is also compliant with UL 1500 and SAE J1171 standards for external ignition protection, making it safe for installations on gasoline-powered boats. The maximum operating voltage is 32V DC. To ensure optimal performance, the use of 4\/0 AWG (120 mm²) cables per terminal is recommended, with a tightening torque of 13.56 N·m (120 in-lb). The compact dimensions (approximately 74.93 mm x 74.93 mm) and multiple mounting options (surface, front panel, rear panel) facilitate its integration into various layouts.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Red","offer_id":55861149335892,"sku":"6011-BSS","price":50.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_m-Series_Mini_Dual_Circuit_Plus_Battery_Switch_-_Red_6011-BSS_-_Ref_40f43b5e.jpg?v=1779203356"},{"product_id":"blue-sea-m-series-mini-dual-circuit-plus-coupe-batterie-noir","title":"Dual-circuit battery switch Plus™ mini m-Series - black","description":"\u003cp\u003e\n    The Blue Sea m-Series Mini Dual Circuit Plus™ Battery Switch (model 6011200-BSS) is designed for flexible and secure management of two isolated battery banks in marine, RV, or emergency vehicle applications. This switch allows simultaneous switching between two battery banks or combining them to power all loads, providing essential versatility for onboard electrical systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Battery Bank Management\u003c\/h3\u003e\n\u003cp\u003e\n    With a continuous capacity of 300A DC per circuit and a starting current of 675A DC per circuit for 30 seconds, the \u003cstrong\u003e6011200-BSS\u003c\/strong\u003e model is suitable for outboards and small gasoline or diesel engines. It differs from the standard \"Dual Circuit\" version of the m-Series by its \"Plus™\" function, which includes the ability to combine battery banks when needed—a feature absent in basic Dual Circuit models. This functionality is particularly useful for emergency starts or maximizing energy availability.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The switch is equipped with 3\/8\"-16 (M10) tinned copper terminals for maximum conductivity and corrosion resistance, accepting cables up to 4\/0 AWG (120 mm²). Its \"Make-Before-Break\" design ensures switching without interrupting power, protecting sensitive electronic equipment from voltage spikes and outages. The \u003cstrong\u003eBlue Sea m-Series Mini Dual Circuit Plus™\u003c\/strong\u003e meets ABYC requirements for battery switches, is UL 1107 listed, and complies with UL 1500 and SAE J1171 standards for external ignition protection, making it safe for installations on gasoline-powered boats. Its compact housing (approximately 7.5 cm x 7.5 cm x 8.4 cm) and multiple mounting options (surface, front, or rear panel) facilitate integration into tight spaces, unlike Blue Sea’s larger HD-Series switches designed for diesel engines with higher DC current requirements up to 600A.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black","offer_id":55861150974292,"sku":"6011200-BSS","price":51.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_m-Series_Mini_Dual_Circuit_Plus_Battery_Switch_-_Black_6011200-BSS_-_Ref_fc4b0478.jpg?v=1779203383"},{"product_id":"blue-sea-ml-rbs-remote-battery-switch-12v-gestion-electrique","title":"Remote-controlled battery switch ML-RBS 12 V","description":"\u003cp\u003e\n    Designed for managing power in 12V DC marine systems, the \u003cstrong\u003eBLUE SEA ML-RBS Remote Battery Switch 12V\u003c\/strong\u003e (part number 7700100B-BSS) is a high-current magnetic latching battery switch. It allows power switching under load, with a continuous rating of 500A DC and a 30-second start rating of 1450A DC. This model stands out for its control flexibility, offering manual operation via an integrated override button, as well as remote management.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    The ML-RBS 7700100 features silver alloy contacts for switching loads under power, supporting 10,000 switching cycles at 300A under 12V. Its 3\/8\"-16 tinned copper stud terminals ensure conductivity and corrosion resistance, with a maximum tightening torque of 15.8 N•m. The magnetic latching (bi-stable) design ensures near-zero current draw in ON or OFF position, drawing less than 7A for only 20 ms during state changes. The switch is rated IP66, providing protection against powerful water jets, and meets external ignition protection requirements per ISO 8846 and SAE J1171.\n\u003c\/p\u003e\n\n\u003ch3\u003eDifferentiation and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    Compared to traditional battery switches, the BLUE SEA ML-RBS 7700100 offers extended management capabilities thanks to its remote control and manual locking function for maintenance—a feature absent in solenoids such as the ML series 7701100. It ships with a Contura remote control switch (2145) and a Deutsch DTM connector (the coupling part is not included but required), simplifying integration into existing dashboards. Its ability to handle contact voltages up to 64V DC while maintaining a 9-16V DC control voltage makes it compatible with multi-voltage systems, including solar applications.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55861159952724,"sku":"7700100B-BSS","price":183.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_ML-RBS_Remote_Battery_Switch_12V_7700100B-BSS_-_Ref_89fd48a5.jpg?v=1779203618"},{"product_id":"blue-sea-ml-rbs-coupe-batterie-distance-24v","title":"Remote-controlled battery switch ML-RBS with manual override and automatic tripping - 24 V","description":"\u003cp\u003e\n    The BLUE SEA ML-RBS 7717-BSS remote battery switch with manual auto-release control is designed for managing 24V DC marine electrical systems. It provides load switching and connection under load for high-current applications, with continuous ratings of 500A, intermittent 700A (5 min), and starting 1450A (30 sec). This model is comparable to the 7713 (12V version) in the same ML-RBS series but differs from solenoids 7718 and 7719 by including a manual control.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and technical performance\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with silver alloy contacts, the 7717-BSS ensures reliable switching of live loads, supporting 150A at 24V DC over 10,000 cycles. Its magnetic latching (bi-stable) design allows operation without continuous current draw in ON or OFF position, consuming only 4A for 40 ms during state changes. The 3\/8\"-16 (M10) tinned copper stud terminals ensure maximum conductivity and corrosion resistance, with a 22 mm length to accept multiple cable lugs.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The ML-RBS 7717-BSS integrates a manual control with \"LOCK OFF\" function for electrical system maintenance, providing independent power control. It meets external ignition protection requirements ISO 8846 and SAE J1171, and is rated IP66, protecting against powerful water jets. A remote LED indicator output is available for switch status monitoring. For optimal installation, positioning near the batteries is recommended, while the remote control switch can be mounted in an accessible location. The product is supplied with a Contura SPDT PN 2155 remote control switch.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"24 V","offer_id":55861162049876,"sku":"7717-BSS","price":252.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_ML-RBS_Remote_Battery_Switch_with_Manual_Control_Auto-Release_-_24V_7717-BSS_-_Ref_ed71aa37.jpg?v=1779203665"},{"product_id":"blue-sea-e-series-selecteur-batterie-afd","title":"Battery switch e-Series selector with AFD","description":"\u003cp\u003e\n    Designed for power management in marine electrical systems, the Blue Sea e-Series 9002E-BSS battery selector with AFD provides a solution for applications requiring reliable power supply and advanced alternator protection. This switch allows selection of battery bank 1 or 2, or combining them (1+2) for charging or emergency starting.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced protection with integrated AFD\u003c\/h3\u003e\n\u003cp\u003e\n    The Alternator Field Disconnect (AFD) integrated into the \u003cstrong\u003eBlue Sea e-Series 9002E-BSS battery selector\u003c\/strong\u003e is a critical safety feature. It protects the alternator diodes from potential damage when switching to the OFF position while the engine is running. By interrupting the alternator field wire, the AFD reduces its output to zero, preventing destructive voltage spikes. This functionality is crucial for the longevity of your charging system.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and marine construction\u003c\/h3\u003e\n\u003cp\u003e\n    The 9002E-BSS is rated for inboard gasoline and diesel engines, supporting a continuous current rating of 350A, an intermittent rating of 600A for 5 minutes, and a starting current of 1200A for 30 seconds, at a maximum voltage of 32V DC. The 3\/8\"-16 (M10) tinned copper terminal studs, 7\/8\" (22.22 mm) long, ensure maximum conductivity and high corrosion resistance while allowing connection of multiple 4\/0 AWG (95mm²) cable lugs. The recommended torque for the terminals is 15.82 N·m (140 in-lb). The \"make-before-break\" function ensures switching between battery banks without power interruption, essential for critical systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety, compliance, and positioning\u003c\/h3\u003e\n\u003cp\u003e\n    This switch meets ignition protection requirements (UL 1500, SAE J1171, ISO 8846), making it safe for installations on gasoline-powered boats. Its robust design, with an IP66 protection rating, protects against dust and powerful water jets, ensuring durability in marine environments. The housing allows surface or rear-panel mounting and is compatible with most PERKO and Guest battery switch drill templates. The \u003cstrong\u003eBlue Sea e-Series 9002E-BSS\u003c\/strong\u003e stands out with its integrated AFD and IP66 protection, essential features for safety and durability in marine environments. It uses tinned copper terminal studs for superior conductivity and corrosion resistance, and accepts 4\/0 AWG cables, ensuring optimal power management for demanding applications. Its compliance with ABYC E-11 and UL 1107 standards confirms its reliability and performance in marine environments.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55861173256532,"sku":"9002E-BSS","price":56.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_e-Series_Selector_Battery_Switch_with_AFD_9002E-BSS_-_Ref_f3d481bd.jpg?v=1779203916"},{"product_id":"blue-sea-e-series-on-off-coupe-batterie-marin","title":"e-Series ON\/OFF battery switch","description":"\u003cp\u003e\n    The BLUE SEA e-Series ON\/OFF battery switch (part number 9003E-BSS) is designed for reliable management of a single battery or battery bank on board. With a continuous rating of 350 amperes and a 1,200-ampere peak for 30 seconds, it is suitable for high-power output applications, including gasoline and diesel inboard engines.\n\u003c\/p\u003e\n\u003ch3\u003eRobust Design and Marine Safety\u003c\/h3\u003e\n\u003cp\u003e\n    This model features 3\/8\"-16 (M10) tin-plated copper studs for maximum conductivity and enhanced corrosion resistance. The one-piece stud design minimizes heat buildup and ensures a stable connection. The 22.22 mm (7\/8\") stud length accommodates multiple cable lugs, simplifying integration into complex systems. Additionally, the 9003E-BSS is ignition-protected, meeting UL 1500 and SAE J1171 standards, making it safe for installation on gasoline-powered boats.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    The e-Series battery switch housing allows for surface or rear-panel mounting, providing installation flexibility. It accepts battery cables up to 4\/0 AWG (95 mm²), ensuring compliance with current specifications. The recommended torque for terminals is 15.82 N·m (140 in-lb). This battery switch meets ABYC (American Boat and Yacht Council) requirements for battery switches, is UL 1107 certified, CE marked, and features IP66 protection against powerful water jets, ensuring durability in marine environments. Unlike other e-Series variants such as the 9001e or 9002e selectors, the 9003E-BSS is a simple ON\/OFF switch, focusing on direct and secure disconnection of a single battery, with a maximum operating voltage of 48V DC—higher than models typically limited to 32V DC in the same category for similar functions.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55861174206804,"sku":"9003E-BSS","price":50.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_e-Series_On_Off_Battery_Switch_9003E-BSS_-_Ref_3bc26bae.jpg?v=1779203943"},{"product_id":"blue-sea-e-series-on-off-coupe-batterie-9004e","title":"e-Series ON\/OFF battery switch","description":"\u003cp\u003e\n    The BLUE SEA e-Series ON\/OFF 9004E battery switch is designed for reliable management of a single battery to a load group, specifically for inboard gasoline and diesel engines. It belongs to the e-Series range from Blue Sea Systems, offering a continuous capacity of 350 A and a maximum operating voltage of 48 V DC, distinguishing it from the m-Series models (300 A, 48 V DC) intended for outboards and small engines, and the HD-Series models (500-600 A, 32 V DC) for large diesels.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and protection\u003c\/h3\u003e\n\u003cp\u003e\n    This battery switch delivers electrical performance with a cranking capacity of 1,200 A for 30 seconds and an intermittent capacity of 600 A for 5 minutes. The terminal studs are made of tin-plated copper, 3\/8\"-16 (M10), ensuring maximum conductivity and corrosion resistance. Their one-piece design reduces the risk of overheating, and their length of 22.22 mm (7\/8\") allows for multiple 4\/0 AWG (95mm²) cable lugs. A tightening torque of 15.82 N·m (140 in-lb) is recommended for connections.\n\u003c\/p\u003e\n\n\u003ch3\u003eSafety and installation\u003c\/h3\u003e\n\u003cp\u003e\n    The 9004E includes ignition protection, meeting UL 1500 and SAE J1171 standards, making it safe for installation on gasoline-powered boats. Its Alternator Field Disconnect (AFD) function protects the alternator diodes if the switch is turned OFF while the engine is running. The housing allows for surface or rear-panel mounting and is IP66 rated, providing protection against powerful water jets. It complies with American Boat and Yacht Council (ABYC) requirements for battery switches, is UL 1107 certified, and CE marked to ISO 8846.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55861192098132,"sku":"9004E-BSS","price":65.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_e-Series_On-Off_Battery_Switch_9004E-BSS_-_Ref_41de70b8.jpg?v=1779203971"},{"product_id":"blue-sea-e-series-selector-3-position-interrupteur-batterie-afd","title":"Battery selector switch e-Series 3-position with AFD","description":"\u003cp\u003e\n    Designed for marine and embedded electrical systems, the BLUE SEA e-Series Selector 3-Position Battery Switch with AFD (part number 11001) provides reliable management of two battery banks. This 3-position switch (battery 1, battery 2, off) is specifically intended for high-power applications requiring proven reliability and low heat generation, such as boats equipped with inboard gasoline or diesel engines.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    Model 11001 delivers electrical performance with a 1,200 A cranking capacity for 30 seconds. It supports an intermittent current of 600 A (5 minutes) and a continuous current of 350 A at 32 V DC. Its tinned copper 3\/8\"-16 (M10) stud terminals ensure maximum conductivity and corrosion resistance, with a length of 22.22 mm to accept multiple cable lugs. The recommended tightening torque is 15.82 N·m (140 in-lb). To achieve its rated values, use of 4\/0 AWG (120 mm²) cables is required.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced Features and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    A distinctive feature of the 11001 is its Alternator Field Disconnect (AFD) function, which protects the alternator diodes in case of engine-running switch disconnection by reducing the alternator output to zero. This protection is critical for the longevity of the charging system. The switch is also ignition-protected, meeting SAE J1171, UL 1500, and ISO 8846 requirements, making it safe for installation on gasoline-powered boats. It complies with ABYC battery switch requirements and is UL 1107 listed. Its housing allows surface or rear-panel mounting, offering installation flexibility. Unlike the e-Series Selector 4-Position or Dual Circuit Plus models, this switch does not feature \"make-before-break\" operation when switching between banks 1 and 2, requiring the \"OFF\" position to be selected before changing banks.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55880906998100,"sku":"11001-BSS","price":60.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_e-Series_Selector_3_Position_Battery_Switch_with_AFD_11001-BSS_-_Ref_7be4fe3f.jpg?v=1779313934"},{"product_id":"blue-sea-e-series-5510e-coupe-batterie-double-circuit","title":"Dual-circuit battery switch e-Series","description":"\u003cp\u003e\n    The Blue Sea Systems e-Series 5510E dual-circuit battery switch is designed for marine applications requiring reliable management of two isolated battery banks. This switch is suitable for inboard gasoline or diesel engines, offering a continuous capacity of 350 A per circuit and a maximum voltage of 32 V DC.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Technical Performance\u003c\/h3\u003e\n\u003cp\u003e\n    Featuring 3\/8\"-16 (M10) tinned copper terminals, the 5510E ensures maximum conductivity and enhanced corrosion resistance. The one-piece stud design reduces overheating risks and guarantees a stable connection. Each 22.22 mm (7\/8\") stud accommodates multiple cable terminals, with a recommended tightening torque of 15.82 N·m (140 in-lb). It is compatible with battery cables up to 4\/0 AWG (120 mm²).\n\u003c\/p\u003e\n\u003ch3\u003ePositioning in the Range and Compliance\u003c\/h3\u003e\n\u003cp\u003e\n    The 5510E model is part of Blue Sea Systems' e-Series, characterized by a continuous capacity of 350 A, higher than the m-Series (300 A) but lower than the HD-Series (500–600 A) designed for large diesel engines. Compared to competitors such as the Perko 8501DP (250 A continuous) or the Cole Hersee M750 (230 A continuous), the 5510E offers a higher current capacity for its category. It meets ABYC requirements for battery switches, is UL 1107 listed, and complies with UL 1500 and SAE J1171 standards for ignition protection. Its IP66 rating ensures resistance to powerful water jets and dust. It is also CE and ISO 8846 certified.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Use\u003c\/h3\u003e\n\u003cp\u003e\n    The 5510E housing allows surface or rear-panel mounting, providing installation flexibility. It features a tactile indicator for the switch position. Unlike the 5511E (Dual Circuit Plus), the 5510E is a Dual Circuit™ switch that allows simultaneous switching of two isolated battery banks without bank combination functionality. The positive battery terminal must be disconnected before installation, and the switch must never be turned OFF while the engine is running.\n\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":55895331733844,"sku":"5510E-BSS","price":65.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_-_Hero_-_BLUE_SEA_e-Series_Dual_Circuit_Battery_Switch_5510E-BSS_-_Ref_79a1e416.jpg?v=1779361734"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/2fe8489a755d0ea7ec571727f0d216a6.png?v=1779967544","url":"https:\/\/skysat.fr\/en\/collections\/battery-isolators.oembed","provider":"Skysat","version":"1.0","type":"link"}