{"title":"Probes (Transducers)","description":"\u003ch2\u003e Probes (transducers): underwater vision at the service of your navigation\u003c\/h2\u003e\n\n\n\u003cp\u003e The transducer, or sonar, is the underwater eye of your boat. It converts electrical signals into sound waves and vice versa, allowing you to map the seabed, detect fish, and ensure safe navigation. At Skysat, drawing on our experience in offshore racing, we help you choose the transducer best suited to your needs. Discover our carefully curated selection and our tips for optimal system integration here.\u003c\/p\u003e\n\n\n\u003ch2\u003e choose the right probe technology\u003c\/h2\u003e\n\n\n \u003cp\u003eChoosing the right sonar technology is crucial and depends on your specific needs: depth, bottom type, boat speed, and target species. Different technologies exist, each with its own advantages and limitations. Understanding these differences is essential for optimizing your fishing or boating performance.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTraditional (2D) transducers:\u003c\/strong\u003e A proven solution for detecting depth and bottom structure. Their conical beam offers wide coverage but limited resolution. Ideal for shallow water navigation.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eDownVision™ probes:\u003c\/strong\u003e Use CHIRP technology for more detailed bottom imaging, making it easier to identify structures and objects. They are less effective at depth than traditional probes.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eSideVision™ transducers:\u003c\/strong\u003e Offer a lateral view of the bottom, significantly increasing coverage area. Useful for locating specific fishing spots, but require precise installation.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCHIRP probes:\u003c\/strong\u003e Emit a frequency-modulated signal, which improves resolution and target separation. They offer superior performance in all conditions, but are more expensive.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e the importance of frequency and power\u003c\/h2\u003e\n\n\n\u003cp\u003e The frequency and power of the transducer influence its range and resolution. Lower frequencies penetrate deeper, while higher frequencies offer better resolution. Choosing a transducer suited to your navigation area is therefore essential. Power, meanwhile, determines the transducer's ability to detect targets in challenging conditions.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eLow frequency (50 kHz):\u003c\/strong\u003e Great depth, but low resolution. Suitable for deep-sea navigation and searching for large fish.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHigh frequency (200 kHz):\u003c\/strong\u003e Shallow depth, but high resolution. Ideal for coastal fishing and structure identification.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eLow-frequency CHIRP:\u003c\/strong\u003e Excellent penetration and good resolution. An ideal compromise for demanding anglers.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePower (Watts):\u003c\/strong\u003e The higher the power, the better the transducer can detect weak targets or targets in turbid water. Inadequate power can lead to noise and excessive power consumption.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e compatibility and installation\u003c\/h2\u003e\n\n\n \u003cp\u003eProper installation and compatibility of your transducer with your multifunction display are crucial for optimal performance. Check the communication protocols (NMEA 2000, SeaTalk NG) and ensure your transducer is correctly configured. Incorrect installation can lead to reading errors and signal loss.\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eNMEA 2000 compatibility:\u003c\/strong\u003e Allows easy integration with other onboard electronic devices.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eConnectors:\u003c\/strong\u003e Ensure the probe connector is compatible with your multifunction display. Adapters may be required.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eProbe placement:\u003c\/strong\u003e An incorrect location can cause interference or inaccurate data readings. Consult the installation manual for specific recommendations.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eSoftware update:\u003c\/strong\u003e Ensure your multifunction display and probe are up to date with the latest software versions to benefit from the best performance.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cstrong\u003eSkysat's advice\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Before drilling through your hull to install a through-hull transducer, test the transducer through the hull with a bag of water. This will allow you to verify its proper functioning and optimize its placement safely.\u003c\/p\u003e","products":[{"product_id":"airmar-capteur-dst810-profondeur-vitesse-temperature-nmea2000","title":"IDST-810 depth, speed, and temperature sensor - NMEA 2000","description":"\u003cp\u003e\n    Designed for sailboats and powerboats, the AIRMAR DST810 multisensor transducer provides depth, speed through water, and temperature data, enhanced by boat attitude information via NMEA 2000. This through-hull transducer integrates Bluetooth Low Energy (BLE) wireless connectivity for advanced calibration and simplified configuration.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Features and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The DST810 operates at 235 kHz, helping to prevent interference with other depth sounders on board. It delivers depth measurements up to 100 meters via NMEA 2000, with a minimum range of 0.5 meters and data updates once per second. Speed through water is measured from 0.3 to 45 knots. With a refresh rate of 5.7 Hz, speed readings are visibly smoother and more responsive. The water temperature sensor operates from -10°C to 40°C with an accuracy of ±0.5°C.\n\u003c\/p\u003e\n\n\u003ch3\u003eInnovation and Advanced Calibration\u003c\/h3\u003e\n\u003cp\u003e\n    The integrated attitude sensor for heel and trim, with a nominal accuracy of +\/- 1° after calibration, enables advanced speed corrections. This feature, combined with the AIRMAR CAST™ app via Bluetooth, offers heel-compensated speed calibration across multiple angles and speed ranges (up to 10 speeds). Previously limited to expensive PC software, this capability is now accessible via a mobile device. All speed calibrations and NMEA configurations are stored directly in the DST810 sensor, ensuring independence from onboard instruments.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The DST810 uses a Gen2 paddlewheel for responsive speed performance, providing ultra-responsive readings from 0.3 knots and linearity at 0.6 knots. Its 10 x 44-degree fan beam is designed to maintain a stable bottom lock on deep-keel hulls or heeling sailboats, and is compatible with hull inclinations up to 22°. Power is supplied via the NMEA 2000 network (9 VDC to 16 VDC, drawing less than 200 mA). The sensor ships with a 6-meter DeviceNet cable. Compared to simpler NMEA 2000 transducers from the same brand or competitors, the DST810 is an advanced all-in-one solution, eliminating the need for separate attitude sensors and simplifying complex calibration via its wireless interface.\u003c\/p\u003e","brand":"AIRMAR","offers":[{"title":"Default Title","offer_id":53723737981268,"sku":"000-15735-001","price":364.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_3dcf8764-d366-43b7-babc-633e9db6b7f6.png?v=1779463017"},{"product_id":"navico-sonde-forwardscan-xdcr-avec-manchon-et-bouchon","title":"ForwardScan XDCR probe with sleeve and cap","description":"The Navico ForwardScan XDCR depth sounder is a high-performance fishfinder designed for recreational boaters and fishing professionals. This sounder provides superior location accuracy thanks to its integrated transducer, enabling precise mapping of seabeds. It is ideal for shallow-water navigation and trolling. It is compatible with B\u0026G and Raymarine navigation systems via the NMEA 2000 protocol. The ForwardScan XDCR is an essential tool for enhancing the safety and efficiency of your nautical activities. This sounder comes with a sleeve and cap for optimal protection. It stands out for its reliability and robustness, characteristics of the Navico range. It can be used alongside other B\u0026G equipment such as Zeus fishfinders and GPS units.","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723747385684,"sku":"000-11674-001","price":577.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_a17cb447-a381-49aa-8350-0f19b3113c10.png?v=1772639652"},{"product_id":"raymarine-sonde-a-coller-cpt-s-high-chirp-6m","title":"High Chirp conical beam adhesive probe, 0\/12\/20° angle, CPT-S, 6m cable","description":"\u003cp\u003eThe Raymarine CPT-S High CHIRP glue-on transducer delivers exceptional underwater detection performance without compromising your hull’s integrity. Specifically engineered for fiberglass boats, this in-hull transducer eliminates the risk of leaks and hydrodynamic drag associated with through-hull or transom-mount transducers. Its High CHIRP conical beam technology ensures excellent target separation and precise bottom tracking, ideal for fishing and coastal navigation.\u003c\/p\u003e\n\u003ch3\u003eOptimal adaptability and integration\u003c\/h3\u003e\n\u003cp\u003eUnlike standard models, this CPT-S variant is designed to perfectly match your hull’s geometry. It accommodates deadrise angles of 0°, 12°, and 20°, ensuring the acoustic beam points vertically downward for reliable echo returns. Supplied with a 6-meter cable, it integrates easily into small and medium-sized display units. Compared to more complex Raymarine transducer models, the CPT-S offers an affordable and highly effective solution for navigators seeking the precision of traditional CHIRP sonar with a no-drill installation.","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723806466388,"sku":"A80691","price":149.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_cab8cb71-9215-48ab-b3b9-27a88694a61e.jpg?v=1779220817"},{"product_id":"raymarine-trisonde-analogique-dst800-capteur-marin","title":"Trisonde Analog DST800","description":"\u003cp\u003e\n    The Raymarine DST800 analog triducer is a multifunction sensor designed to provide essential navigation data: depth, speed, and water temperature. Unlike modern digital sensors that include data processing and NMEA 2000 output, this analog model emits raw signals that require a compatible instrument or a converter to be interpreted and displayed. This positioning makes it a suitable solution for replacing existing transducers or integrating into older navigation systems based on analog inputs.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Functionality\u003c\/h3\u003e\n\u003cp\u003e\n    The analog operating principle of the DST800 triducer involves a direct connection to dedicated instrument displays or analog-to-digital conversion boxes. For example, to integrate it into a modern NMEA 2000 network, a converter such as an Airmar ST900\/P79 or a Raymarine iTC-5 module would be required to convert analog signals into digital data usable by multifunction displays (MFDs) from brands like Raymarine, B\u0026G, or Garmin. This approach allows maintaining the reliability of a proven transducer while adapting to the evolution of onboard electronic architectures.\n\u003c\/p\u003e\n\n\u003ch3\u003eTarget Applications\u003c\/h3\u003e\n\u003cp\u003e\n    Intended for recreational boaters and sailboats requiring a reliable source of depth, speed, and temperature data, the analog DST800 triducer is particularly relevant for installations where existing instruments are analog or for budget-conscious users who prefer a robust transducer with an external converter over a native NMEA 2000 smart transducer. Its design allows for through-hull installation, offering flexibility for various hull types and maritime applications.\n\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":53723807809876,"sku":"A22154","price":250.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_8ce8c01b-5f17-4bae-81ea-ae4b51c2d80d.png?v=1779216700"},{"product_id":"garmin-sonde-traversante-gdt43-profondeur-temperature-nmea2000","title":"GDT™ 43 thru-hull transducer (depth\/temperature) and NMEA 2000 adapter","description":"\u003cp\u003e\n    Designed for sailboats and powerboats, the Garmin GDT™ 43 through-hull transducer provides accurate depth and water temperature measurements. This system is an essential component for reliable marine data acquisition, integrating directly into existing NMEA 2000® networks.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and Technical Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The GDT™ 43 transducer operates at a 200 kHz sonar frequency, capable of reaching a maximum depth of 275 m (900 ft), making it suitable for a wide range of nautical applications. It delivers water temperature readings within an operating range of -10 to 70°C for the transducer itself, and -15 to 70°C for the NMEA 2000 adapter. The adapter, measuring 101.4 x 116.3 x 76.2 mm, enables plug-and-play connectivity to the NMEA 2000 network, with a required power supply of 9 to 16 Vdc and a maximum power consumption of 2.4 W. The transducer cable is 6 m (19.7 ft) long, offering installation flexibility.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The Garmin GDT™ 43 is positioned as a preferred solution for upgrading or outfitting new vessels. It is specifically designed for hulls with a deadrise angle between 0 and 20 degrees, ensuring optimal performance. A distinctive advantage of this transducer is its ability to directly replace existing Nexus and Silva 43 mm (TH43) through-hull transducers, simplifying retrofit processes for vessel owners equipped with these systems. Its flush through-hull design minimizes hydrodynamic drag, a critical factor for speed and efficiency, distinguishing it from transom-mount transducers.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53723842412884,"sku":"010-01749-10","price":211.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_2f22a5d0-63af-4523-aadf-1adab3c83612.jpg?v=1779970298"},{"product_id":"airmar-sonde-xsonic-ss175h-w-0-deg-traversante-inox","title":"XSONIC SS175H-W 0° Depth Sounder Transducer","description":"\u003cp\u003eThe Airmar XSONIC SS175H-W 0° depth sounder transducer is a through-hull, solid stainless steel model rated at 1 kW, specifically designed for demanding sport fishermen and vessels with steel or aluminum hulls. This model integrates high-frequency CHIRP technology (130–210 kHz) with a constant 25-degree wide beam, providing twice the coverage of a standard high-frequency CHIRP transducer. With its 0-degree tilt, it is optimized for flat hulls or those with a deadrise angle between 0 and 7 degrees. Equipped with a 9-pin XSONIC connector, it interfaces directly with compatible Lowrance, Simrad, and B\u0026G multifunction displays.\u003c\/p\u003e\n\u003ch3\u003eHigh-frequency CHIRP detection and wide-beam performance\u003c\/h3\u003e\n\u003cp\u003eThe High CHIRP frequency band excels in target separation and detail resolution in the upper and mid-water layers. The SS175H-W’s 25° wide beam scans a significantly larger volume of water beneath the boat, making it strategic for tracking pelagic fish. Unlike the SS175M model, which prioritizes depth with its narrower beam, the H-W version maximizes the analyzed water volume to ensure no suspended targets are missed. The integrated fast-response temperature sensor delivers ultra-precise real-time thermal readings to target thermoclines.\u003c\/p\u003e\n\u003ch3\u003eRobust stainless steel construction\u003c\/h3\u003e\n\u003cp\u003eManufactured in stainless steel, this transducer is the essential alternative to the bronze B175H-W model for metal hulls, preventing destructive galvanic corrosion. Its flush-mounted, streamlined design significantly reduces hydrodynamic drag, enabling clear bottom and fish echo readings even at cruising speeds. Installation ensures seamless integration and maximum durability in the harshest marine environments.\u003c\/p\u003e","brand":"AIRMAR","offers":[{"title":"Default Title","offer_id":53723864858964,"sku":"000-13780-001","price":1646.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_adab68fe-6536-40c9-9267-98ebbc5105ae.webp?v=1779436906"},{"product_id":"airmar-capteur-xsonic-p319-transducteur-traversant-profondeur-temperature","title":"XSONIC P319 Sensor","description":"\u003cp\u003e\n    The \u003cstrong\u003eAIRMAR XSONIC P319\u003c\/strong\u003e transducer, also marketed as xSonic by the Navico Group (which includes brands such as Lowrance and Simrad), is a compact through-hull transducer designed to provide depth and water temperature data. Ideal for planing powerboats and sailboats up to 8 meters (26 feet), it offers a reliable and discreet solution for navigation and fishing.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical performance and integration\u003c\/h3\u003e\n\u003cp\u003e\n    This plastic transducer (urethane acoustic window) stands out with its low-profile design, protruding only 5 mm (3\/16\") from the hull, thereby minimizing drag. The P319 features a single ceramic element for dual-frequency operation at 50 kHz and 200 kHz. At 50 kHz, it delivers a wide 45° beam with a maximum range of 366 meters (1,200 feet), while at 200 kHz, its 12° beam provides precise detail up to 213 meters (700 feet). With 600 Watts of power, it ensures effective seabed detection. Compared to more robust versions like the Airmar B117 (bronze) or SS60 (stainless steel), the P319’s plastic construction is a lightweight, cost-effective option, compliant with ABYC H-27 standards for durability.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the \u003cstrong\u003eAIRMAR XSONIC P319\u003c\/strong\u003e is straightforward, requiring only a single 51 mm (2 inch) hole in the hull. It comes with a rubber gasket to accommodate irregular hull surfaces and features a right-angle cable exit for space-saving and enhanced protection. The transducer is compatible with fiberglass and metal hulls. With a 10-meter cable, it adapts to various configurations. The xSonic designation indicates native compatibility with Navico systems (Lowrance, Simrad), but it can also be connected to other brands such as Garmin, Si-Tex, or Standard Horizon using specific adapter cables, offering great flexibility in integrating with existing marine electronic systems.\n\u003c\/p\u003e","brand":"AIRMAR","offers":[{"title":"Default Title","offer_id":53723865055572,"sku":"000-13915-001","price":159.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/odoo-capteur-xsonic-p319_000-13915-001-01.webp?v=1779462376"},{"product_id":"garmin-sonde-traversante-gst-43-gst-10","title":"GST™ 43 Through-Hull Transducer + GST™ 10","description":"\u003cp\u003eThe \u003cstrong\u003eGarmin GST™ 43 + GST 10 through-hull transducer\u003c\/strong\u003e is a complete water speed and temperature measurement kit designed for sailboats and powerboats requiring reliable precision. This kit combines the GST 43 transducer with the GST 10 network adapter, enabling direct integration on an NMEA 2000 network or a legacy Nexus system. With a speed accuracy of ±1% and a capability of up to 90 knots (depending on the transducer type), this kit provides essential data for navigation and performance optimization, whether cruising or racing.\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and connectivity\u003c\/h3\u003e\n\u003cp\u003eThe GST 10 acts as a gateway between the GST 43 transducer and your onboard network. It connects to the NMEA 2000 network via a drop cable and a T-connector (included). The GST 43 can also be wired directly to a legacy Nexus network following the provided color code (green, yellow, white, shield). Once connected, the GST 10 appears as a device in the NMEA 2000 equipment list on Garmin, GMI, or GNX chartplotters. It supports essential PGNs: water speed (128259) and temperature (130312).\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and calibration\u003c\/h3\u003e\n\u003cp\u003eInstalling the GST 43 through-hull transducer requires a 43 mm hole in the hull. For sandwich hulls (cored fiberglass), specific preparation steps are required, including the use of resin or epoxy to seal the core. Temperature calibration is performed via the NMEA 2000 network menu on a Garmin chartplotter, GMI, or GNX. The GST 43 transducer comes with a transport cap, useful for cleaning or maintenance.\u003c\/p\u003e\n\n\u003ch3\u003eComparison and positioning\u003c\/h3\u003e\n\u003cp\u003eCompared to the Garmin GST 20 transducer, which is limited to lower speeds and direct NMEA 2000 connectivity, the GST 43 + GST 10 offers superior speed capability (up to 90 knots) and increased integration flexibility thanks to the dedicated adapter. This kit is a cost-effective alternative to competing brands such as Airmar transducers, offering native compatibility with Garmin and Nexus networks. For sailors seeking a reliable and scalable speed and temperature measurement solution, this kit is an excellent value.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53723877671252,"sku":"010-04284-00","price":132.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_0ffc759c-82ec-486d-9ffc-334a30abb151.png?v=1779186370"},{"product_id":"lowrance-sonde-eagle-splitshot","title":"Eagle SplitShot Transducer","description":"\u003cp\u003e\n    The \u003cstrong\u003eLowrance Eagle SplitShot transducer\u003c\/strong\u003e is a versatile transducer designed to optimize the fishing and boating experience with the Lowrance Eagle series displays. Integrating SplitShot technology, this transducer combines the capabilities of traditional wide-angle CHIRP sonar with DownScan Imaging. It allows users to simultaneously view clear fish arches and detailed underwater structures.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Performance and Advanced Imaging\u003c\/h3\u003e\n\u003cp\u003e\n    The SplitShot transducer operates at frequencies of 455 kHz and 800 kHz, offering superior clarity and target separation for precise fish detection and identification of submerged structures. Unlike Bullet Skimmer transducers, which are limited to traditional CHIRP sonar (compatible with the Eagle 4x), the SplitShot enhances underwater analysis with the DownScan view. Although it does not include the SideScan function found on TripleShot transducers, the SplitShot represents an excellent balance between performance and cost for anglers seeking structural detail without requiring a side view.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Robustness\u003c\/h3\u003e\n\u003cp\u003e\n    This transducer is specifically compatible with the Lowrance Eagle 5, Eagle 7, and Eagle 9 fishfinder\/chartplotter combos, ensuring seamless integration and optimal performance. The Eagle systems, with which the transducer interfaces, operate on a 12 V DC power supply (10.8 - 18 V DC) and are protected by a recommended 3 A fuse. Designed for the marine environment, the transducer, like the Eagle series displays, is compliant with the IPX7 waterproof rating, ensuring resistance to temporary immersion. Its operating temperature range extends from -15°C to 55°C, guaranteeing its reliability in various climatic conditions.\n\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":54014513119572,"sku":"000-16284-001","price":84.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lowrance-sonde-eagle-splitshot_000-16284-001-3.jpg?v=1774433907"},{"product_id":"lowrance-sonde-eagle-tripleshot-sondeur-peche","title":"Eagle TripleShot Transducer","description":"\u003cp\u003e\n    The Lowrance Eagle TripleShot transducer (part number 000-16285-001) is a transom-mount transducer designed exclusively for the Lowrance Eagle series multifunction displays, including the 5, 7, and 9-inch models. Weighing 0.3 kg, this hardware component includes a water temperature sensor and connects to the display via an 8-pin Twist-Lock port. It comes with a 6-meter (20-foot) cable to suit most mounting configurations on small to medium-sized boats.\n\u003c\/p\u003e\n\n\u003ch3\u003e3-in-1 Sonar Technologies\u003c\/h3\u003e\n\u003cp\u003e\n    This model combines three distinct sonar frequencies in a single, streamlined housing. The High Wide CHIRP module ensures target separation in the water column for fish identification. DownScan Imaging generates high-resolution imagery of underwater structures directly beneath the hull. Finally, SideScan Imaging provides a lateral scan covering up to 183 meters (600 feet) on each side of the vessel, enabling rapid mapping of prospecting areas. The system is managed by the Autotuning function, which automatically adjusts sonar settings based on hydrological variations.\n\u003c\/p\u003e\n\n\u003ch3\u003eImage Processing and FishReveal Functionality\u003c\/h3\u003e\n\u003cp\u003e\n    The transducer utilizes Lowrance's FishReveal software technology. This system merges raw data: it overlays fish echoes detected by the CHIRP beam directly onto the structural imagery from DownScan Imaging. This combination allows for the visual isolation of biological targets amidst rocks, weeds, or wrecks on a single screen, without requiring the display to be split into multiple windows.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning in the Range and Market Alternatives\u003c\/h3\u003e\n\u003cp\u003e\n    Within the Lowrance lineup, the TripleShot transducer is positioned above the SplitShot model, the latter lacking the SideScan function. It also differs from the Eagle Eye transducer, which is a distinct technology integrating Live sonar and exclusively for the Eagle Eye 9 display. In the broader marine electronics market, the TripleShot directly competes with transducers like the Garmin GT52HW-TM or the Raymarine HyperVision series, offering an all-in-one solution that prioritizes automatic settings for users seeking precise raw data without complex manual calibration.\n\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":54014596710740,"sku":"000-16285-001","price":148.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lowrance-sonde-eagle-tripleshot_000-16285-001-1.jpg?v=1774434626"},{"product_id":"lowrance-sondeur-eagle-7-splitshot","title":"Lowrance EAGLE 7 SplitShot Fishfinder","description":"\u003cp\u003e\n    The \u003cstrong\u003eLowrance EAGLE 7 SplitShot fishfinder\u003c\/strong\u003e is a combined fishfinder\/chartplotter designed for anglers seeking a high-performance and intuitive solution. Featuring a 7-inch screen with a resolution of 800 x 480 pixels, it offers viewing angles of 85° (up\/down\/left\/right) for optimal readability in various lighting conditions.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Fishfinder Technology\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with a SplitShot™ and TripleShot compatible fishfinder port, the EAGLE 7 SplitShot integrates CHIRP wide-angle and DownScan Imaging technologies. It operates on frequencies of 455 kHz and 800 kHz, enabling precise fish detection and detailed visualization of underwater structures. Features such as depth range highlighting (6-12 m) and shallow areas (0-3 m) enhance fishing efficiency. The device also supports MOB waypoint creation and screenshot capture for simplified tracking of points of interest.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    Built for the marine environment, this fishfinder has an IPX7 waterproof rating and operates within a temperature range of -15°C to 55°C. Its power supply is 12 V DC (10.8 - 18 V DC) with a maximum consumption of 6.6 W (550 mA at 12 V DC) and a recommended fuse of 3 A. For navigation, a microSD® card reader (up to 32 GB) is available for marine charts. Weighing 0.67 kg for the screen alone, the \u003cstrong\u003eLowrance EAGLE 7 SplitShot\u003c\/strong\u003e is a compact and robust solution.\n\u003c\/p\u003e\n\n\u003ch3\u003eMarket Positioning\u003c\/h3\u003e\n\u003cp\u003e\n    The Lowrance Eagle series positions itself as a strategic option for anglers who prioritize ease of use and reliable fishfinder performance without the complexities of advanced networking. Compared to higher-end models like the Lowrance Elite FS or HDS Pro, the EAGLE 7 SplitShot takes a more direct approach, focusing on essential detection and navigation features. It competes with products such as the Garmin Striker Vivid or the Raymarine Element S, standing out for its intuitive interface and the versatility of its SplitShot transducer for coastal, lake, and river fishing.\n\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":54074024231252,"sku":"000-16115-001","price":364.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lowrance-sondeur-eagle-7-splitshot_000-16115-001-3.png?v=1775004945"},{"product_id":"lowrance-splitshot-capteur-temperature-ligne","title":"SPLITSHOT Lowrance inline temperature sensor","description":"\u003cp\u003e\n    The \u003cstrong\u003eLowrance SPLITSHOT inline temperature sensor\u003c\/strong\u003e is an essential component for navigators and anglers seeking accurate water temperature data. Designed to integrate into an existing line, this sensor enables continuous monitoring, crucial for identifying thermoclines and fish activity zones, or simply for precise environmental data.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning and Technical Data\u003c\/h3\u003e\n\u003cp\u003e\n    The technical documentation provided for this product primarily focuses on the Lowrance Hook Reveal multifunction display series (5, 7, and 9-inch models). These displays, known for their versatility in sonar capabilities (50\/200 kHz frequencies for traditional transducers and 455\/800 kHz for SideScan\/DownScan), feature advanced functionalities such as Micro SD card reader connectivity and ruggedness ensured by an IPX6 and IPX7 protection rating. Their operating temperature range spans from -15 °C to +55 °C.\n\u003c\/p\u003e\n\u003cp\u003e\n    However, detailed specifications directly related to the \u003cstrong\u003eLowrance SPLITSHOT inline temperature sensor\u003c\/strong\u003e, such as its specific measurement range, accuracy, interface type (NMEA 2000, analog), cable length, or construction materials, are not explicitly defined in the provided context. This sensor should therefore be considered as a temperature measurement accessory for Lowrance-compatible systems, whose precise performance will depend on integration with the host system. The sensor's weight is not specified; the weights mentioned in the documents (0.46 kg and 1.00 kg) refer to the Hook Reveal 5 and 9 displays respectively.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    In the absence of specific data on the sensor itself, it is important to note that Lowrance products, including their accessories, are generally designed to meet marine environment requirements. Integrating an inline temperature sensor is typically straightforward, requiring proper connection to the sonar system or multifunction display for data display. This type of sensor effectively complements the information provided by sonar transducers, which, although some may include a temperature function, are not always optimally positioned for specific readings or may lack the desired accuracy for certain applications.\n\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":54074046120276,"sku":"000-14411-001","price":44.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lowrance-splitshot-capteur-de-temperature-en-ligne_000-14411-001-2.jpg?v=1775005628"},{"product_id":"lowrance-hds-12-pro-sondeur-gps-sonde-active-imaging-hd-3-en-1","title":"HDS-12 PRO Fishfinder with Active Imaging HD 3-in-1 Transducer","description":"\u003cp\u003eThe \u003cstrong\u003eHDS-12 PRO\u003c\/strong\u003e from LOWRANCE is a 12-inch fishfinder\/GPS combo designed for professional anglers and demanding enthusiasts requiring superior detail and detection performance. This model sits at the top of the HDS range, succeeding the HDS Live series, and directly competes with Garmin's GPSMAP and Raymarine's Axiom series by focusing on the most advanced fishfinder technologies.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-definition display and intuitive interface\u003c\/h3\u003e\n\u003cp\u003eThe unit features a 12-inch multitouch screen with a 1280 x 800 pixel resolution. Its brightness exceeding 1200 nits ensures perfect readability even in full sunlight. Wide viewing angles of 85° (up\/down, left\/right) allow the screen to be viewed from any position on deck. The interface is designed for quick access to essential functions, with customizable pages and quick-access buttons.\u003c\/p\u003e\n\n\u003ch3\u003eFishfinder performance with Active Imaging HD\u003c\/h3\u003e\n\u003cp\u003eThis package includes the \u003cstrong\u003eActive Imaging HD 3-in-1 transducer\u003c\/strong\u003e, which delivers exceptionally clear images in DownScan and SideScan modes thanks to its multiple frequencies (455, 700, 800, 1075, 1200 kHz). In addition to imaging, the HDS-12 PRO is equipped with two independent 9-pin transducer ports, supporting a traditional CHIRP fishfinder (low, medium, high frequency) up to 1 kW power for deep-water detection without requiring an external module.\u003c\/p\u003e\n\n\u003ch3\u003eComplete connectivity and network integration\u003c\/h3\u003e\n\u003cp\u003eThe HDS-12 PRO is a true control center for your boat. It features two 100BASE-T Ethernet ports for connecting radars, additional displays, or transducer modules. Connectivity also includes an NMEA 2000 port, an NMEA 0183 port, 802.11b\/g\/n Wi-Fi, and Bluetooth 5.2. Inputs for analog video and HDMI allow connection of cameras or other external sources. Data storage is provided by two microSDXC card readers.\u003c\/p\u003e\n\n\u003ch3\u003eRobust design for marine environments\u003c\/h3\u003e\n\u003cp\u003eBuilt to last, the housing is waterproof to IPX6 and IPX7 standards. It withstands harsh sea conditions, with certification for 100,000 shock cycles at 20 G. The operating temperature range is from -15°C to 55°C, ensuring consistent reliability. The unit is powered by 12 V DC, with a maximum consumption of 48 W and protection via a recommended 5 A fuse.","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":55593324085588,"sku":"000-15988-001","price":2250.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lowrance-sondeur-hds-12-pro-avec-sonde-active-imaging-hd-3-en-1_000-15988-001-1.png?v=1776777958"},{"product_id":"garmin-sonde-panoptix-ps30-vue-descendante","title":"Garmin Panoptix™ PS30 Down View Sonar","description":"\u003cp\u003e\n    Designed for fishing and navigation, the Garmin Panoptix™ PS30 sonar provides real-time sonar imaging for a detailed and dynamic view beneath the vessel. This downward-viewing transducer allows users to visualize fish, lures, and underwater structures with immediate clarity, even when the boat is stationary. Unlike traditional sonars that display a historical bottom view, the Panoptix PS30 delivers live data, offering an instant understanding of activity beneath the hull.\n\u003c\/p\u003e\n\n\u003ch3\u003eReal-Time Sonar Capabilities\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin Panoptix™ PS30 sonar\u003c\/strong\u003e integrates three distinct display modes for a comprehensive understanding of the underwater environment. The \u003cstrong\u003eLiveVü Down\u003c\/strong\u003e mode provides real-time moving sonar images, allowing you to track fish and bait movements beneath the boat. You can observe lures and fish reactions to their approach, offering a \"live view\" fishing experience.\n\u003c\/p\u003e\n\u003cp\u003e\n    For three-dimensional analysis, the \u003cstrong\u003eRealVü 3D Down\u003c\/strong\u003e mode displays a 3D representation of what is below the boat, useful when stationary by showing the history of a single sweep. The \u003cstrong\u003eRealVü 3D Historical\u003c\/strong\u003e mode is optimized for fish detection when the boat is moving, visualizing the scanned water column in 3D, from the bottom to the surface, with all objects and fish present.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Design\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin Panoptix™ PS30\u003c\/strong\u003e operates at a frequency of 417 kHz with a power output of 144 W, offering a maximum depth of 90 meters (300 feet). Its dimensions are 9.1 x 4.2 x 17 cm with a weight of 800 g (transducer only). Power requirements include a voltage range of 10 to 35 V DC with a maximum consumption of 10 W.\n\u003c\/p\u003e\n\u003cp\u003e\n    Beam widths vary by mode:\n    \u003c\/p\u003e\u003cul\u003e\n        \u003cli\u003eLiveVü Down: 120°\/10°, 120°\/20°, 120°\/40° (+\/- 45° forward\/aft)\u003c\/li\u003e\n        \u003cli\u003eRealVü Historical: 120° x 6°\u003c\/li\u003e\n        \u003cli\u003eRealVü Down: 90° x 120°\u003c\/li\u003e\n        \u003cli\u003eGeneral: 120° x 60°\u003c\/li\u003e\n    \u003c\/ul\u003e\n    The transducer operates within a temperature range of 0°C to 40°C during use and -40°C to +70°C when off, and resists immersion with an IPX7 waterproof rating. An integrated compass (AHRS sensor) compensates for boat roll and pitch to stabilize and smooth the sonar image displayed on the chartplotter. The power cable measures 4.5 m and the Ethernet cable 9 m.\n\n\n\u003ch3\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003ePanoptix™ PS30 sonar\u003c\/strong\u003e is supplied with a transom mount kit. For optimal performance, installation must be carried out in an area of calm water, away from sources of acoustic or electromagnetic interference (engines, electrical cables, other transducers) and outside the flow generated by the propeller or hull appendages. Cables must be routed on the starboard side of the vessel for correct default display orientation on the chartplotter.\n\u003c\/p\u003e\n\u003cp\u003e\n    This transducer is compatible with a selection of Garmin chartplotters, including the Garmin GPSMAP series (such as 723\/923\/1223, 8410\/8412\/8416, 7xx\/7xxx, 8xxx, 85xx Black Box) and the Garmin ECHOMAP series (such as Ultra 102\/122 sv, UHD2 62\/72\/92 sv, UHD 72\/92 sv, UHD 72 cv, and the 70 series).\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55859041141076,"sku":"010-01284-00","price":1153.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_755ed039-656d-4723-96d9-c8040bae8327.jpg?v=1779186338"},{"product_id":"garmin-sonde-panoptix-ps51-th-frontvu-traversante","title":"Panoptix PS51-TH Sonar with FrontVü","description":"\u003cp\u003e\n    The Garmin Panoptix PS51-TH sonar with FrontVü is a cutting-edge solution for preventive navigation and underwater obstacle detection. Designed for thru-hull installation, this multibeam sonar provides an essential forward-looking sonar view, integrating FrontVü and LiveVü technologies for enhanced situational awareness. It stands out within Garmin’s transducer range, which includes traditional models, GT-TH with ClearVü and SideVü, as well as LVS-TH with LiveScope for forward and under-boat views. The PS51-TH is specifically positioned for safety, enabling navigators to anticipate hazards in shallow or unknown waters.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Thru-Hull Installation\u003c\/h3\u003e\n\u003cp\u003e\n    As a thru-hull transducer, the \u003cstrong\u003ePanoptix PS51-TH sonar\u003c\/strong\u003e ensures superior signal quality, even at high speeds and in deep waters, thanks to continuous and non-turbulent water contact. Its design allows it to work with all types of engines. Installation requires careful attention: a hole must be drilled in the hull, and a fairing block (not included and to be fabricated) is essential if the deadrise angle exceeds 5° to ensure the sonar beam is perpendicular to the waterline. With a fairing block, the sonar can adapt to hulls up to 29 mm thick for a deadrise angle of 12°, and up to 19 mm for a 20° angle.\n\u003c\/p\u003e\n\n\u003ch3\u003eMounting Considerations and Signal Optimization\u003c\/h3\u003e\n\u003cp\u003e\n    For optimal performance, the positioning of the \u003cstrong\u003eGarmin Panoptix PS51-TH sonar\u003c\/strong\u003e is critical. On displacement hulls, it should be mounted near the centerline. For planing hulls, the stern, near the centerline and inside the first strake, is recommended. Keel-boat installations should place it 300–600 mm ahead of the keel, while long-keel vessels should favor the center of the boat, away from the keel, at the point of minimal deadrise. Avoid turbulence zones (propellers, strakes, through-hull fittings, water intakes or discharges, hull irregularities) and maintain a distance of over 600 mm from any other transducer. Installing the sonar in a hull area with a deadrise angle under 6° is recommended to ensure continuous immersion and accessibility from inside the vessel. Electromagnetic and acoustic interference must be minimized through proper cable routing and adequate grounding. Software updates are performed via a memory card loaded from a Windows computer or a preloaded card provided by Garmin support.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860273447252,"sku":"010-01753-00","price":1076.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_587594e8-0a0f-43a0-b184-a4911d7f1876.jpg?v=1779190970"},{"product_id":"garmin-panoptix-ps22-if-sonde-peche-glace-portable","title":"Panoptix™ PS22-IF, Portable Real-Time Fishfinder","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin Panoptix PS22-IF\u003c\/strong\u003e is a portable ice-fishing scanning sonar designed for portable underwater detection systems. This transducer provides real-time visualization of fish and structures under the ice, allowing anglers to observe fish reactions to bait in real time. It stands out for its ability to deliver dynamic sonar images, a significant advantage for behavioral analysis of targets.\n\u003c\/p\u003e\n\n\u003ch3\u003ePanoptix Real-Time Technology for Ice Fishing\u003c\/h3\u003e\n\u003cp\u003e\n    Garmin’s Panoptix technology is recognized for its live sonar capabilities, and the PS22-IF model adapts it specifically to the ice-fishing environment. Unlike Panoptix transducers designed for permanent installations on boats for open-water navigation, such as LiveScope models or traditional PS30\/PS31 transducers for forward or down imaging, the PS22-IF is optimized for portable and vertical use. It enables precise and instantaneous detection of targets in the water column, providing a dynamic understanding of activity under the ice. This approach outperforms more classic flasher or 2D sonars, which offer less interactive and immediate interpretation of echoes. The PS22-IF is a precision tool for fish behavioral analysis, offering critical responsiveness for adjusting fishing techniques.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Specialized Application\u003c\/h3\u003e\n\u003cp\u003e\n    Specifically designed for the rigors of ice fishing, the \u003cstrong\u003ePS22-IF\u003c\/strong\u003e transducer is an essential component for anglers seeking advanced and reliable detection. Its design incorporates the requirements of cold and wet environments, ensuring consistent performance. It positions itself as a high-performance tool for behavioral analysis of fish beneath the frozen surface, offering a high-performance and interactive alternative to traditional sonar solutions. The installation documentation, dated May 2024, confirms its relevance and current support within the Garmin lineup.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860278460756,"sku":"010-01945-10","price":746.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_520c8e57-a2ec-406b-a819-99201f5479b4.jpg?v=1779191052"},{"product_id":"garmin-gt30-th-sonde-traversante-clearvu-sidevu","title":"GT30-TH Transducer - In-Hull Stainless Steel ClearVü\/SideVü","description":"\u003cp\u003e\n    The Garmin GT30-TH transducer is an in-hull stainless steel solution designed to provide advanced sonar imaging capabilities for demanding boaters. Integrating ClearVü™ and SideVü™ technologies, it operates on 455\/800 kHz frequencies with 500W power, enabling detailed and precise visualization of underwater structure and fish. This transducer is specifically suited for hulls with inclines under 5°, ensuring optimal performance without requiring a tilt compensating block. For hulls with an incline greater than 5°, using a tilt compensating block is recommended to maintain the sonar beam perpendicular to the waterline.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and technical integration\u003c\/h3\u003e\n\u003cp\u003e\n    The GT30-TH stands out from transom-mount transducers with its permanent through-hull installation, delivering excellent signal quality even at high speeds and greater depths, without turbulence or dropout issues. It also includes a temperature sensor, enriching the data available to the chartplotter. Compatible with Garmin chartplotters via a 12-pin connection, it requires a software update on the chartplotter for seamless integration and operation. This transducer is ideal for powerboats and sailboats, offering a robust alternative to transom-mount models like the GT20-TM or GT22-TM, which are more prone to external damage and turbulence interference at high speeds. For more sophisticated imaging needs, Garmin offers LVS-TH transducers with LiveScope™ or PS51 multibeam, positioning the GT30-TH as a high-performance and durable option for side and down imaging.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and durability\u003c\/h3\u003e\n\u003cp\u003e\n    The stainless steel in-hull design of the \u003cstrong\u003eGarmin GT30-TH\u003c\/strong\u003e ensures increased durability in the marine environment. While installation requires precise hull drilling for the main through-hull fitting and included anti-rotation bolts, it is detailed for various hull types (fiberglass with or without core, metal). Anti-rotation bolt installation is critical to prevent device rotation during navigation. Strategic positioning is essential, away from propellers, chines, keels, and any source of turbulence or electromagnetic interference, to maximize SideVü signal clarity. Optimal performance is achieved in non-turbulent water, and the transducer must be mounted parallel to the boat’s fore-aft axis. Marine-grade materials and mounting method ensure long-term reliability even under intensive use conditions.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Depth sounder only","offer_id":55860278952276,"sku":"010-01961-10","price":496.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_8a088a6e-3d9c-4c7a-a30c-a7481421cb04.jpg?v=1779191068"},{"product_id":"garmin-sonde-gt30-thp-clearvu-sidevu-traversante-inox","title":"GT30-THP Transom-Mount Sonar - ClearVü\/SideVü Stainless Steel Pair","description":"\u003cp\u003e\n    The Garmin GT30-THP dual transom-mount stainless steel sonar represents an advanced solution for underwater detection, integrating ClearVü™ and SideVü™ technologies. Designed for transom installations, it delivers 500W power on 455\/800 kHz frequencies, ensuring detailed mapping and clear images of underwater structure and fish. This model is specifically suited for hulls with deadrise angles under 25°, and includes a temperature sensor. Its 12-pin connectivity ensures seamless integration with compatible Garmin chartplotter\/fishfinder systems. The stainless steel construction provides enhanced robustness and durability in marine environments, distinguishing it from plastic-based transducers.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT30-THP\u003c\/strong\u003e is positioned as a top-tier option for users requiring optimal performance compared to transom-mount transducers. Unlike transom-mount models such as the GT20 series, the through-hull transducer maintains constant, undisturbed contact with water even at higher speeds, resulting in superior signal quality and more reliable sonar images. While it does not offer the high-power traditional CHIRP sonar found in the GT51 series, its ClearVü and SideVü capabilities are optimized for lateral and under-boat visualization, essential for identifying structures and fish schools. For hull deadrise angles exceeding 5°, the use of a fairing block is recommended to ensure the sonar beam is perpendicular to the water surface, maximizing return accuracy.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the \u003cstrong\u003eGT30-THP\u003c\/strong\u003e requires hull drilling, typically handled by a qualified marine installer to ensure watertight integrity and optimal positioning. The process involves hull preparation (whether fiberglass, laminated fiberglass, or metal) and the use of included anti-rotation bolts to prevent transducer movement. A Garmin chartplotter software update is required post-installation to ensure compatibility and peak performance. The stainless steel construction offers superior resistance to corrosion and impacts, guaranteeing extended longevity compared to less durable materials. This model is ideal for vessels where high-speed sonar performance and durability are critical factors, distinguishing itself from competing solutions through full integration into the Garmin ecosystem via its 12-pin connection.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Through-deck fitting","offer_id":55860279771476,"sku":"010-01961-11","price":890.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_209a287b-3d06-4c10-ab5a-bb669b7c4eac.jpg?v=1779191088"},{"product_id":"garmin-gt21-th-sonde-traversante-clearvu-chirp-500w-600w-temperature-8-pin","title":"GT21-TH Transducer - Through-hull ClearVü CHIRP and traditional sonar","description":"\u003cp\u003e\n    The Garmin GT21-TH is an 8-pin through-hull transducer designed to provide advanced underwater detection capabilities. This model combines two distinct sonar technologies: CHIRP ClearVü and traditional sonar. The CHIRP ClearVü operates at 500W on 260\/455kHz frequencies, delivering near-photographic images of structures and fish beneath the vessel. In addition, the traditional sonar delivers 600W on 50\/200kHz frequencies, ideal for deep detection and target separation. A temperature sensor is also integrated, providing critical environmental data for fishing conditions analysis.\n\u003c\/p\u003e\n\u003ch3\u003eOptimal installation and performance\u003c\/h3\u003e\n\u003cp\u003e\n    The through-hull design of the GT21-TH transducer ensures operation in non-turbulent waters, essential for optimal sonar performance. Installation requires careful attention to hull deadrise angle. If the deadrise angle exceeds 5°, the use of a fairing block is recommended to align the transducer parallel to the waterline, maximizing sonar accuracy. Anti-rotation bolts are included and must be installed to prevent device rotation during movement, avoiding potential damage to the boat. Garmin emphasizes updating your chartplotter software after installation to ensure compatibility and best performance.\n\u003c\/p\u003e\n\u003ch3\u003eCompatibility and technical requirements\u003c\/h3\u003e\n\u003cp\u003e\n    The GT21-TH transducer installation is adaptable to various hull types, including fiberglass hulls (with or without core) and metal hulls, each requiring specific drilling and sealing procedures. Required tools range from a 3mm drill bit to a 32mm hole saw, including adjustable wrenches and high-quality marine sealant. Mounting location is critical: it must be ahead of propellers and turbulence generated by hull appendages. For keel boats, specific positions relative to the keel and centerline are recommended. The GT21-TH positions itself as a robust and performant solution for recreational boaters and anglers requiring detailed and reliable underwater mapping, though it is not the most powerful in Garmin’s CHIRP range, such as the GT51M-TH or GT56UHD-TM models, which offer higher frequencies and power for more specific applications. It represents an excellent balance between performance and cost for versatile use.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860280361300,"sku":"010-01962-10","price":366.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5ff36a25-0fc8-45ce-a882-e8f3a0d9682d.jpg?v=1779191108"},{"product_id":"garmin-gt51m-tm-sonde-tableau-arriere","title":"GT51M-TM Sonar - Transom Mount CHIRP\/ClearVü\/SideVü","description":"\u003cp\u003e\n    Designed for coastal and offshore fishing, the \u003cstrong\u003eGarmin GT51M-TM\u003c\/strong\u003e (010-01966-00) is a versatile transom-mount sonar solution integrating three distinct sonar technologies. This 12-pin transducer combines traditional CHIRP sonar, ClearVü sonar, and SideVü sonar, providing complete underwater coverage from a single installation.\n\u003c\/p\u003e\n\u003ch3\u003eDetailed Sonar Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The GT51M-TM’s traditional CHIRP sonar operates on a mid-band frequency (80-160 kHz) with 600 W power, reaching a maximum depth of 1,800 feet. It delivers clear fish arches and optimized target separation thanks to a beam width of 24 to 13 degrees. For structure imaging, the CHIRP ClearVü and SideVü sonars operate at frequencies of 260 kHz (245-275 kHz) and 455 kHz (445-465 kHz), respectively, with 500 W power per element. ClearVü achieves a maximum depth of 1,000 feet, while SideVü reaches 750 feet. Specific beam widths are 2.0° x 51° at 260 kHz and 1.4° x 29° at 455 kHz, producing photographic-quality images of structures and fish below and beside the boat. A fast-response temperature sensor is also integrated, providing valuable environmental data.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT51M-TM\u003c\/strong\u003e is a transom-mount transducer designed for simplified installation. It ships with 30 feet of cable and all necessary mounting hardware. Its design supports transom angles from 0 to 70 degrees, making it adaptable to a variety of hull shapes. This transducer is compatible with a range of Garmin multifunction displays, including the GPSMAP 7600xsv series, GSD25 sonar modules, and Garmin echoMAP CHIRP sv, ECHOMAP Plus, and UHD sv units. Positioned within Garmin’s lineup, the GT51M-TM offers a robust intermediate solution, distinguished from single-frequency transducers or entry-level scanning models by its integrated sonar technologies and optimized performance in rough sea conditions—an advantage over other transducers whose signals may degrade in turbulent waters.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Rear panel","offer_id":55860281344340,"sku":"010-01966-00","price":410.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_eb57ce10-1f1f-4a31-94ab-d17c7b7a7678.jpg?v=1779191130"},{"product_id":"garmin-gt51m-th-transducteur-traversant","title":"GT51M-TH Thru-Hull Sonar Transducer - CHIRP\/ClearVü\/SideVü","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT51M-TH thru-hull transducer\u003c\/strong\u003e is a sonar detection solution designed for robust and permanent installation on your vessel's hull. This thru-hull model is recommended for boats where consistent sonar performance without interference is critical, avoiding typical turbulence from transom-mounted transducers.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and compatibility of the Garmin GT51M-TH transducer\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the \u003cstrong\u003eGarmin GT51M-TH\u003c\/strong\u003e requires precise procedures, detailed in the provided instructions, including hull preparation and securing with anti-rotation bolts. This method ensures increased stability of the device even in motion and prevents unwanted rotation. It is crucial to position the transducer in an area of clean water, away from propellers, keels, water intakes, or any turbulence source to optimize sonar signal quality. For hulls with a deadrise angle greater than 5°, using a fairing block is recommended to align the transducer parallel to the waterline, improving measurement accuracy. It is mandatory to update the firmware of the associated Garmin chartplotter to ensure compatibility and optimal performance with the \u003cstrong\u003eGT51M-TH\u003c\/strong\u003e.\n\u003c\/p\u003e\n\u003ch3\u003eSpecific mounting requirements for the Garmin GT51M-TH transducer\u003c\/h3\u003e\n\u003cp\u003e\n    Technical documentation highlights preparation steps for different hull types: fiberglass (with or without core) and metal, each requiring specific tools and techniques, such as using marine epoxy resin to seal fiberglass cores. Applying a marine sealant is essential to ensure a perfect seal between the transducer, the fairing block (if used), and the boat hull. The \u003cstrong\u003eGT51M-TH\u003c\/strong\u003e model, like other Garmin thru-hull transducers, is designed for durable and reliable integration, although details on specific frequencies or technologies (ClearVü, SideVü, CHIRP) are not directly provided in the installation documentation. The GT51M designation typically indicates advanced multi-beam capability, typical of high-end transducers from the brand.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Transom","offer_id":55860283244884,"sku":"010-01966-10","price":640.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_a25e84b2-6a53-46d0-84e8-feaff484ca16.jpg?v=1779191149"},{"product_id":"garmin-gt51m-thp-sonde-traversante","title":"GT51M-THP Transom-Mount Sonar - CHIRP\/ClearVü\/SideVü Pair","description":"\u003cp\u003e\n    The Garmin GT51M-THP \u003cstrong\u003etransom-mount sonar\u003c\/strong\u003e is a cutting-edge solution for Garmin CHIRP sonar systems. Designed for optimal installation, it delivers superior performance by eliminating interference and turbulence commonly encountered with transom-mount transducers. Its transom-mount design is particularly well-suited for fiberglass hulls (with or without core) and metal hulls, offering installation flexibility for a wide range of vessels.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and acoustic performance\u003c\/h3\u003e\n\u003cp\u003e\n    GT51M-THP installation is detailed to ensure perfect integration and long-term reliability. It requires precise drilling of holes for the main stem and anti-rotation bolts, essential for keeping the transducer in place even at high speeds, preventing potential hull damage. The use of a fairing block is recommended if the hull’s deadrise angle exceeds 5°, allowing the transducer to be positioned parallel to the waterline for enhanced sonar accuracy. This technical approach minimizes cavitation and ensures clean water flow over the transducer element, maximizing the efficiency of ClearVü, SideVü, and CHIRP technologies.\n\u003c\/p\u003e\n\u003ch3\u003eRobust design and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    The installation process emphasizes hull preparation, including sanding, cleaning, and applying a fast-curing, flexible marine sealant for flawless waterproofing below the waterline. Anti-rotation bolts and nut-secured mounting (with rubber and nylon washers) ensure robust mechanical stability. Unlike transom-mount transducers such as the GT20-TM or GT22HW-TM, the GT51M-THP’s transom-mount design provides a fixed and stable position, critical for acquiring detailed and consistent sonar data, particularly for precision bathymetry and SideVü underwater structure detection. It is imperative to update the Garmin display software during installation for optimal compatibility and performance.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Deck-through fitting","offer_id":55860284064084,"sku":"010-01966-11","price":1175.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_f32760f7-0e25-4760-8398-c2e6a812bd0e.jpg?v=1779191168"},{"product_id":"garmin-panoptix-livescope-lvs12-sonde-sonar","title":"Panoptix LiveScope LVS12 Sonar Transducer","description":"\u003cp\u003e\n    Designed to provide real-time sonar imaging without the need for an external black box module, the Garmin Panoptix LiveScope LVS12 transducer (ref. 010-02143-00) is a direct and cost-effective solution. It stands out within the LiveScope range by its direct connection to compatible chartplotters, simplifying installation compared to transducers like the LVS32 or LVS34 which require the GLS10 black box. This positioning makes it an accessible option for anglers seeking LiveScope technology with reduced wiring.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and real-time imaging\u003c\/h3\u003e\n\u003cp\u003e\n    The LVS12 transducer delivers LiveScope forward and down views with an operational frequency ranging from 530 to 1,100 kHz and a transmission power of 500 Watts. Its field of view consists of two 30-degree sectors (forward to aft) and a 20-degree side view. It allows visualization of structures and fish up to 60 meters (200 feet) ahead of the boat in forward view, and up to 60 meters in depth in down view. This capability provides precise real-time detection of targets below and around the vessel.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003ca href=\"\/en\/garmin-panoptix-livescope-lvs12-sonde-sonar\"\u003eGarmin Panoptix LiveScope LVS12 transducer\u003c\/a\u003e integrates directly with Garmin GPSMAP chartplotters from the 8400\/8600xsv series, including models such as the GPSMAP 8410xsv, 8412xsv, 8416xsv, 8610xsv, 8612xsv, 8616xsv, as well as ECHOMAP Ultra units. It is equipped with a 6-meter (20-foot) cable with a 12-pin connector, facilitating connection without an intermediate module. It can also serve as a supplementary source for traditional sonars and ClearVü.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced features and installation\u003c\/h3\u003e\n\u003cp\u003e\n    Thanks to its integrated Attitude and Heading Reference System (AHRS), the transducer compensates for boat movements to maintain a stable and clear sonar image, even in rough conditions. Users can switch between forward and down views or display them simultaneously on their screen. With dimensions of 113 x 92 x 23 mm, the transducer is designed for flexible installation. It comes with mounts for installation on electric motors (shaft and body) and on the transom, offering various options depending on the type of vessel and fishing preferences. For optimal performance, installation must follow mounting recommendations to avoid interference and ensure precise calibration of the internal compass.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860306805076,"sku":"010-02143-00","price":434.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_b505889f-8aec-474f-9ace-6a1067d42c5c.jpg?v=1779191452"},{"product_id":"garmin-systeme-panoptix-livescope-lvs32-th-sonar-live-temps-reel","title":"Garmin Panoptix LiveScope™ System","description":"\u003cp\u003e\n    The Garmin Panoptix LiveScope™ system, part number 010-02233-00, represents a major advancement in underwater detection technology by providing real-time sonar views. Designed for demanding users, this system stands out from traditional sonars (such as ClearVü or SideVü) by its ability to display live sonar images, allowing observation of structures, fish, and even moving lures under and around the boat.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced LiveScope™ Technology\u003c\/h3\u003e\n\u003cp\u003e\n    The system's core consists of the GLS™ 10 Black Box sonar module and the LVS32-TH transducer. The LVS32-TH transducer is a through-hull model that supports the forward and down views of the LiveScope™ technology. This configuration provides unparalleled spatial awareness, essential for precision fishing or navigating complex areas. Integration requires a software update on a compatible Garmin chartplotter, ensuring compatibility and optimal performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Strategic Positioning\u003c\/h3\u003e\n\u003cp\u003e\n    Installation of the LVS32-TH transducer requires careful attention. It must be mounted through the hull, away from turbulence sources such as propellers, keels (especially on hulls with high deadrise where a double mount may be necessary), shallow areas, or water intakes. For hulls with a deadrise angle greater than 5°, using a fairing block is recommended to align the sonar beam parallel to the water surface, optimizing signal accuracy. The installation manual details procedures for fiberglass hulls (cored or not) and wooden hulls, including drilling holes of 3 mm, 9 mm, 12\/13 mm, and 32\/38 mm, as well as applying marine sealant for a watertight seal. The GLS™ 10 module must be installed in a ventilated location where its status LEDs are visible and cables are easily accessible.\n\u003c\/p\u003e\n\n\u003ch3\u003eReliability and Maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    The system's design incorporates considerations for reliability in marine environments. The status LED blink codes on the GLS™ 10 sonar module provide quick diagnostics of operational status, connection to the chartplotter, software updates, or transducer issues. Correct mounting with the provided anti-rotation bolts is critical to prevent damage to the vessel and ensure transducer stability while underway. This system positions Garmin at the forefront of real-time scanning sonars, offering a decisive advantage over traditional sonar solutions from competing brands or Garmin's previous product lines.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860308869460,"sku":"010-02233-00","price":1314.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_009a1b42-288a-4bea-877e-874d996d419e.jpg?v=1779191490"},{"product_id":"garmin-pack-sondes-gt36-tm-gt8hw-ih-tableau-arriere-interne","title":"Garmin GT36-TM and GT8HW-IH transducer pack","description":"\u003cp\u003e\n    The Garmin GT36-TM and GT8HW-IH transducer pack is designed to provide a complete and optimized sonar solution, targeting recreational boaters and anglers seeking both reliable high-speed depth detection and detailed imaging of structures and fish. This bundle is particularly suited to boats with fiberglass hulls.\n\u003c\/p\u003e\n\u003ch3\u003eGarmin GT36-TM transducer: Precision UHD imaging\u003c\/h3\u003e\n\u003cp\u003e\n    The GT36-TM transducer, intended for transom or electric motor mounting, integrates Garmin’s Ultra High-Definition ClearVü and SideVü scanning sonar technologies. It operates on CHIRP frequencies of 455 kHz (425–485 kHz), 800 kHz (790–850 kHz), and 1000 kHz (940–1100 kHz), with a power output of 500 W. This versatility delivers clear, distinct images of the seafloor and targets, with a maximum depth of 400 ft in ClearVü and 500 ft in SideVü. High-contrast color palettes enhance structure identification. Its narrow beam (0.52° x 52° at 1000 kHz) ensures fine resolution. Unlike traditional transducers focused on vertical depth, the GT36-TM excels in lateral and under-boat visualization with high detail, comparable to Garmin’s premium UHD range.\n\u003c\/p\u003e\n\u003ch3\u003eGarmin GT8HW-IH transducer: High-speed performance\u003c\/h3\u003e\n\u003cp\u003e\n    The GT8HW-IH is an in-hull through-hull transducer designed specifically for fiberglass hulls. It delivers a traditional high-frequency, broadband CHIRP sonar (145–230 kHz) with a power output of 250 W. Its in-hull design, requiring no hull penetration, makes it ideal for boats unable to accommodate an external transducer or those needing accurate depth readings at high speeds, up to 800 ft in freshwater. It is compatible with hull deadrise angles from 0° to 6°. This transducer is particularly valued on bass boats or other high-speed craft where external transducer cavitation can degrade performance, offering a reliable alternative to transom-mount transducers like the GT36-TM for primary depth reading.\n\u003c\/p\u003e\n\u003ch3\u003eGarmin pack integration and positioning\u003c\/h3\u003e\n\u003cp\u003e\n    This pack cleverly combines the strengths of two complementary transducer types via a Y-cable (12-pin and 8-pin to 12-pin sounder adapter included). The GT8HW-IH provides consistent, reliable depth data even at top speed, without generating drag or turbulence, while being protected from impacts. Meanwhile, the GT36-TM offers a panoramic, detailed underwater view for fishing and navigation at moderate speeds. This combination outperforms the capabilities of a single multifunction transducer that would have to compromise between high-speed performance and detailed imaging. The pack targets demanding users who want the best of both worlds without trade-offs, positioning this Garmin offering as a top-tier solution for in-depth knowledge of their boat’s underwater environment.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860333904212,"sku":"010-02536-00","price":360.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_721452e2-b551-455b-a85e-758a10513060.jpg?v=1779191863"},{"product_id":"garmin-pack-sondes-gt36-tm-gt15m-ih-transducteurs","title":"Garmin GT36-TM and GT15M-IH transducer pack","description":"\u003cp\u003e\n    The Garmin GT36-TM and GT15M-IH transducer pack (reference 010-02536-10) is a hybrid solution designed for navigators and anglers seeking a versatile sonar coverage. This bundle combines high-definition imaging capabilities with reliable depth detection, specifically targeting fiberglass-hulled boats.\n\u003c\/p\u003e\n\n\u003ch3\u003eGarmin GT36-TM transducer: high-definition imaging for structure detection\u003c\/h3\u003e\n\u003cp\u003e\n    The GT36-TM transducer, intended for transom mounting, integrates Ultra High-Definition ClearVü and SideVü scanning sonar technologies. It operates on frequencies of 455 kHz (425-485 kHz), 800 kHz (790-850 kHz), and 1000 kHz (940-1100 kHz), delivering 500 W of power. This configuration provides clear images of fish and underwater structures. Its maximum range reaches 122 meters (400 feet) in ClearVü and 152 meters (500 feet) in SideVü. The GT36-TM stands out with a 20% increased SideVü range at 1000 kHz compared to Garmin’s lower-range models. It also transmits depth and temperature data, and its mounting is compatible with transom angles from 0 to 70 degrees.\n\u003c\/p\u003e\n\n\u003ch3\u003eGarmin GT15M-IH transducer: depth and high-speed performance\u003c\/h3\u003e\n\u003cp\u003e\n    Complementary, the GT15M-IH transducer is designed for internal hull installation, specifically for solid fiberglass hulls up to 16 mm thick. It uses a traditional mid-band CHIRP sonar (85-165 kHz) with 600 W RMS power. This transducer can reach a maximum depth of 579 meters (1900 feet) in freshwater, providing accurate readings even at high speeds. Its internal installation eliminates drag and protects the transducer from external damage. The GT15M-IH comes with four plastic tanks to adapt to deadrise angles from 0 to 25 degrees, ensuring optimal sonar beam performance. Unlike the GT36-TM, it provides depth data only.\n\u003c\/p\u003e\n\n\u003ch3\u003eVersatility and positioning of the Garmin 010-02536-10 pack\u003c\/h3\u003e\n\u003cp\u003e\n    This pack positions itself as a complete solution for users of compatible Garmin chartplotters. While the GT36-TM transducer excels in coastal environments for detailed structure and fish school identification, the GT15M-IH ensures reliability in deeper waters and during high-speed navigation without the constraints of a through-hull mount. This combination allows users to benefit from the advantages of both technologies without significant compromise, offering superior flexibility compared to a single-transducer solution for coastal and offshore fishing.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860335378772,"sku":"010-02536-10","price":397.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_c6f48d32-fe89-4574-a51e-d51932e1431c.jpg?v=1779191889"},{"product_id":"garmin-systeme-livescope-plus-sonde-gls10-lvs34","title":"Garmin LiveScope™ Plus system with GLS 10™ transducer and LVS34","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin LiveScope™ Plus system with GLS 10™ transducer and LVS34\u003c\/strong\u003e is a cutting-edge solution for real-time sonar visualization. Comprising the GLS 10™ sonar module and the LVS34 transducer, this setup is designed to provide dynamic and instantaneous underwater situational awareness. Unlike traditional sonar systems that may offer static views or delayed scans, LiveScope Plus delivers immediate perspective, essential for navigation and object or structure detection. It is mandatory to update your Garmin chartplotter software when installing this device to ensure compatibility and optimal performance.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and operational considerations\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the LiveScope™ Plus LVS34 transom-mount kit requires careful attention to ensure reliability and performance. The process involves using specific tools such as a drill, 17 mm wrenches (including a torque wrench for tightening to 20 N·m or 15 lbf·ft), a #2 Phillips screwdriver, masking tape, and marine sealant. Pilot holes must be drilled with a 4 mm (5\/32 in) bit to a depth of 19 mm (7\/10 in), and 20 mm screws with marine sealant are used to secure the mount. Wiring can be routed through a 32 mm (1 1\/4 in) through-hull hole or from the top of the transom, ensuring electrical interference sources are avoided.\n\u003c\/p\u003e\n\u003cp\u003e\n    Mounting considerations are critical: the transducer must not be placed in the propeller wash path, behind turbulence- or air-bubble-generating elements, and should be mounted as close as possible to the boat’s centerline. For outboard or sterndrive-powered boats, the propeller’s descending side (starboard) is typically recommended. Note that transducer performance is limited at speeds below 19 km\/h (12 mph), where bottom return and depth data may be reduced. At higher speeds, transducer drag can affect course-keeping, potentially reducing top speed or causing drift. Garmin emphasizes that sonar data is for situational awareness only and cannot prevent all groundings or collisions. The transom-mount bracket is not designed to break away on impact, and damage from underwater collisions is not covered under warranty.\n\u003c\/p\u003e\n\u003ch3\u003ePositioning within the Garmin lineup\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLiveScope™ Plus with GLS 10™ transducer and LVS34\u003c\/strong\u003e is a premium offering in Garmin’s real-time sonar systems lineup. It targets demanding users requiring immediate and detailed underwater visibility, whether for sport fishing or precision navigation. This system is a key component for compatible Garmin chartplotters, offering seamless integration and superior display capabilities for a complete immersion in the marine environment. Professional installation is recommended to optimize performance and equipment longevity. Installation assistance videos are available at garmin.com\/videos\/lvs34 to guide users through the process.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Complete system","offer_id":55860384923988,"sku":"010-02706-00","price":1552.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_0f3483a9-2554-4330-b745-a06cc33d7eaa.jpg?v=1779192586"},{"product_id":"garmin-livescope-plus-sonde-lvs34-uniquement","title":"LiveScope™ Plus, LVS34 transducer only","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin LiveScope™ Plus LVS34 transducer\u003c\/strong\u003e represents a major evolution in real-time sonar technology, providing fishermen and navigators with underwater imagery of unparalleled clarity and precision. Designed to integrate with the LiveScope Plus system, this transducer is sold separately, allowing users to upgrade existing installations or replace a component. It is compatible with Garmin multifunction displays from the ECHOMAP Ultra and GPSMAP series, requiring the LiveScope sonar module GLS 10 (sold separately) to operate.\n\u003c\/p\u003e\n\n\u003ch3\u003eEnhanced Clarity and Performance with LiveScope Plus\u003c\/h3\u003e\n\u003cp\u003e\n    The LiveScope Plus technology, embodied by the LVS34 transducer, significantly improves real-time sonar image resolution compared to the previous LiveScope generation (LVS32). It offers reduced noise and better target separation, making it easier to distinguish fish from underwater structures, even at extended depths and ranges. This technical advancement positions the LVS34 as an essential tool for sport fishing and underwater exploration, surpassing its predecessors and offering a high-performance alternative to competing systems like Lowrance ActiveTarget or Humminbird MEGA Live in terms of image purity.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Installation Considerations\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the LVS34 transducer requires careful attention to optimize performance. Although the transducer is sold separately, it is designed to be mounted using a mounting kit (not included) on the transom, an electric motor shaft, or through-hull. For optimal performance, the mounting must be done outside the propeller wash, ideally on the starboard side for outboard motors, avoiding turbulent water zones. It is crucial to update the software of the connected Garmin display to ensure compatibility and optimal functionality. Transducer performance may be limited at speeds above 19 km\/h (12 mph), where bottom return and depth information may be reduced—a characteristic to consider when planning installation and use.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"LVS34 depth sounder only","offer_id":55860385907028,"sku":"010-02706-10","price":1053.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_20b3833a-71a9-477b-8de8-aca262cf60d1.jpg?v=1779192603"},{"product_id":"garmin-livescope-plus-lvs34-if-sonde-peche-sous-glace","title":"LiveScope™ Plus LVS34-IF","description":"\u003cp\u003e\n    The Garmin LiveScope™ Plus LVS34-IF transducer is a real-time sonar solution specifically optimized for ice fishing. Evolving from previous LiveScope generations such as the LVS32, the LVS34-IF offers improved clarity, better target separation, and reduced noise for sharper and more detailed sonar images. Unlike standard LVS34 versions designed for transom or electric motor installation, the -IF version is adapted for mounting on an ice fishing rod, facilitating its deployment and orientation in an ice hole.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced technical performance for ice fishing\u003c\/h3\u003e\n\u003cp\u003e\n    This transducer operates over an extended frequency range, from 530 to 1,100 kHz, enabling high-resolution image acquisition. It can reach a maximum depth\/range of 61 meters, making it effective for exploring a wide water column under the ice. The field of view is optimized with a 135-degree angle from front to back and 20 degrees laterally, providing extended coverage to locate fish and underwater structures. Its compact dimensions (161.7 x 77.5 x 47.8 mm) and weight of 1,018 g (transducer only) make it easy to handle and install on a rod. Designed for demanding environments, it operates within a temperature range of -10°C to 40°C and can be stored from -40°C to 85°C.\n\u003c\/p\u003e\n\u003ch3\u003eSimplified installation and integration\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the LVS34-IF transducer on an ice fishing rod (not included) is facilitated by the included mounting hardware, which includes a rubber liner for rods up to 25 mm in diameter, a tree mounting bracket, and screws. A low-profile mounting option is also provided for those who prefer a more discreet installation without the frequent adjustment button. The transducer connects directly to the GLS™ 10 sonar module via the XDCR port. To minimize electromagnetic interference, a ferrite filter (if included) can be added near the GLS 10 module connector. The design allows for quick orientation changes between down and forward views, offering essential flexibility for ice fishing. It is crucial to secure the transducer cable to avoid tripping hazards and falls, and to avoid over-tightening clamps to prevent cable damage.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"LVS34-IF Depth Sounder","offer_id":55860386595156,"sku":"010-02706-20","price":1148.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_fa682446-e6b8-40f5-8552-ff63d75441f7.jpg?v=1779192621"},{"product_id":"garmin-livescope-xr-lvs62-sonde-gls10-lvs62-sonar-temps-reel","title":"LiveScope™ XR System with GLS 10™ Transducer and LVS62","description":"\u003cp\u003e\n    The Garmin LiveScope™ XR system with LVS62 transducer represents the evolution of real-time sonar technologies, specifically designed to offer extended range. Unlike traditional LiveScope systems (such as previous generations LVS32 or the newer LVS34), the LiveScope XR is optimized for detecting targets at greater distances and in deeper waters, providing increased visibility for freshwater and saltwater anglers. This system consists of the GLS 10™ sonar module and the LVS62 transducer, offering seamless integration with compatible Garmin chartplotters.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Versatile Mounting of LiveScope XR LVS62\u003c\/h3\u003e\n\u003cp\u003e\n    The LVS62 transducer is designed for versatile installation on your trolling motor. Three mounting options are included and detailed: perspective mode mounting, motor barrel mounting, and direct mounting on the motor shaft. Perspective mode mounting allows the transducer to be used for perspective, down, and forward views, with a 11-degree extension arm facilitating transitions between these modes. Barrel or shaft mounting allows for down and forward views only, offering a more discreet installation but without the perspective view. Adjustment knobs are provided for tool-free view changes, while optional discrete hardware allows for a more permanent fixation of the selected angle.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Considerations for Optimal Performance\u003c\/h3\u003e\n\u003cp\u003e\n    To ensure compliance with FCC regulations and reduce electromagnetic interference (EMI), installation of a ferrite bead is required on the transducer cable near the connector. Special attention should be given to transducer cable routing, with the recommendation to use black electrical tape to secure it and to create a service loop of at least 25 cm (10 in) centered on the electric motor’s rotating joint. These precautions are essential to prevent cable damage, ensure full motor rotation without tension, and avoid interference with the propeller. The GLS 10 sonar module must be mounted in a ventilated location, protected from extreme temperatures and immersion, where the LEDs are visible and cables are accessible. A software update of the Garmin chartplotter is mandatory when installing the LiveScope XR LVS62 system to ensure compatibility and optimal performance.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Complete system","offer_id":55860387971412,"sku":"010-02719-00","price":2177.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_05ec33de-f15d-4171-a950-0866f445d74d.jpg?v=1779192642"},{"product_id":"garmin-livescope-xr-lvs62-sonde-sonar-live","title":"LiveScope™ XR LVS62, transducer only","description":"\u003cp\u003e\n    The Garmin LiveScope™ XR LVS62 transducer is a key component of the LiveScope XR system, designed for real-time sonar visualization on electric motors. This transducer offers advanced installation and viewing flexibility, allowing users to adapt their setup to fishing and navigation conditions.\n\u003c\/p\u003e\n\u003ch3\u003eVersatile mounting options\u003c\/h3\u003e\n\u003cp\u003e\n    The LiveScope™ XR LVS62 transducer provides three distinct mounting methods to suit various electric motor types. The \u003cstrong\u003eperspective mode mount\u003c\/strong\u003e allows installation of the transducer on the motor shaft using an extension arm, offering perspective, forward, and downward views. For installation on the motor barrel, the \u003cstrong\u003ebarrel mount\u003c\/strong\u003e is available, providing forward and downward views. Finally, the \u003cstrong\u003eshaft mount\u003c\/strong\u003e secures the transducer directly to the motor shaft, also for forward and downward views, with a lower profile than the perspective mode mount. The included brackets allow tool-free transitions between views using knobs, or a more permanent position with low-profile screws.\n\u003c\/p\u003e\n\u003ch3\u003eView modes and technical installation\u003c\/h3\u003e\n\u003cp\u003e\n    With the extension arm and perspective mode bracket, the LiveScope™ XR LVS62 transducer enables switching between three distinct sonar views: perspective, forward, and down. Each mode is verifiable via markers on the bracket and transducer to ensure correct orientation. Installing the device requires a software update on a compatible Garmin chartplotter. Special attention must be given to the transducer cable routing, using electrical tape to secure it above and below the motor’s rotating joint, and creating a service loop of at least 25 cm. To comply with FCC regulations and reduce electromagnetic interference, a ferrite bead must be installed on the transducer cable near the connector.\n\u003c\/p\u003e\n\u003ch3\u003eImportant considerations\u003c\/h3\u003e\n\u003cp\u003e\n    When planning the installation, it is critical to mount the transducer in a location where it will not be damaged during launch, retrieval, or storage operations. The sonar module (not included with this standalone transducer) must be installed in a well-ventilated area, protected from extreme temperatures and submersion, with LEDs visible and cables accessible. The use of third-party or self-fabricated brackets is not covered by warranty and may result in damage or loss of the transducer. An optional extension cable is available for additional lengths.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"LVS62 depth sounder only","offer_id":55860388725076,"sku":"010-02719-10","price":1638.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_b80d1d99-8a57-4cd8-b864-124e63958e78.jpg?v=1779192662"},{"product_id":"garmin-gt56uhd-tr-sonde-remplacement-force-kraken-63-pouces","title":"GT56UHD-TR transducer - Force® Kraken 63\" electric motor","description":"\u003cp\u003e\n    The replacement transducer \u003cstrong\u003eGarmin GT56UHD-TR\u003c\/strong\u003e is specifically designed for Garmin Force® Kraken 63\" electric motors, maintaining the Ultra High Definition (UHD) sonar capabilities of your fishing system. This essential component restores the original performance of the transducer integrated into the motor, providing ClearVü™ and SideVü™ images of exceptional clarity as well as traditional CHIRP sonar for precise detection of fish and underwater structures.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This transducer integrates perfectly with Garmin Force® Kraken 63\" electric motors. Unlike external transducers such as the GT56UHD-TM (transom-mount) or GT56UHD-TH (through-hull), the GT56UHD-TR is an internal replacement part, optimized for discreet and protected installation within the motor bracket. It ensures that Force Kraken users continue to benefit from interference-free sonar imaging, essential for casting fishing and shallow-water navigation.\n\u003c\/p\u003e\n\n\u003ch3\u003eUltra High Definition Sonar Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The GT56UHD-TR leverages UHD frequencies for enhanced detail in ClearVü and SideVü. Users regain the ability to clearly distinguish fish from structures, identify bottom variations, and accurately map fishing areas. This transducer is the core of the Force Kraken’s advanced detection technology, a competitive advantage over electric motor systems from other brands like Minn Kota or Motorguide, which often require additional external transducers for equivalent sonar performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eComplete Replacement Kit\u003c\/h3\u003e\n\u003cp\u003e\n    The replacement kit includes everything required for factory-spec installation. It contains new screws, washers, O-rings, a neoprene pad, an eyelet wrench, and marine grease. These components ensure optimal sealing and secure mounting, extending the transducer’s and motor’s lifespan in demanding marine environments. The replacement procedure, while detailed, is designed to allow qualified technicians to quickly restore the Force Kraken motor’s sonar functionality.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"63 inches","offer_id":55860391215444,"sku":"010-02732-01","price":305.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_376043a8-61ef-4c68-ac87-ec0049a50d13.jpg?v=1779192702"},{"product_id":"garmin-gt56uhd-tr-sonde-rechange-force-kraken","title":"GT56UHD-TR transducer - Force® Kraken 75\" electric motor","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT56UHD-TR\u003c\/strong\u003e is a replacement transducer designed specifically for the Garmin Force Kraken electric motor. This transducer restores the ultra-high definition (UHD) detection capabilities of your system, essential for detailed visualization of underwater structures and fish. It is compatible with Garmin Force Kraken motor models measuring 1.9 m (75\"), ensuring seamless integration and maintaining original performance.\n\u003c\/p\u003e\n\n\u003ch3\u003eDetailed replacement procedure\u003c\/h3\u003e\n\u003cp\u003e\n    Replacing the \u003cstrong\u003eGarmin GT56UHD-TR\u003c\/strong\u003e transducer involves a series of precise steps, as outlined in the official instructions. The process begins with fully disconnecting the motor from its power source, followed by opening the shaft cap and carefully unplugging the cables (USB, data, and transducer). The propeller drive motor must then be removed from the shaft, which requires unscrewing six bolts and handling the cables with caution. The old transducer is then extracted after removing the skeg and nose cone.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and component integration\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the new \u003cstrong\u003eGarmin GT56UHD-TR\u003c\/strong\u003e transducer is simplified by the inclusion of new bolts, washers, O-rings, neoprene bushings, and marine grease. After preparing the nose cone with the new bushing and transducer, the cables are carefully routed through the shaft. The motor seals are replaced, and marine grease is applied to ensure optimal waterproofing. Assembling the propeller drive motor onto the shaft requires using medium-strength thread-locking compound (such as LOCTITE 243) and tightening to a torque of 4 N·m (35 lbf·in) to guarantee a secure and watertight connection. The final steps include reconnecting the cables in the shaft cap and restoring power to the motor.","brand":"Garmin","offers":[{"title":"75 inches","offer_id":55860392264020,"sku":"010-02732-02","price":318.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5e1b5693-d659-4f21-ad24-8df9afc5abd0.jpg?v=1779192717"},{"product_id":"garmin-gt56uhd-tr-transducteur-remplacement-force-kraken-1-2m","title":"GT56UHD-TR transducer - Garmin Force® Kraken 48\" electric motor","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT56UHD-TR\u003c\/strong\u003e transducer is an essential replacement part designed specifically to maintain the sonar performance of Garmin Force Kraken 1.2 m (48 inch) electric trolling motors. This transducer ensures the continued operation of your fishfinder’s Ultra High Definition (UHD) scanning capabilities, enabling accurate detection of underwater structures and fish.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and Integration of the GT56UHD-TR\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the \u003cstrong\u003eGT56UHD-TR\u003c\/strong\u003e on the Force Kraken motor requires a detailed procedure, including disassembly of the shaft cap, propeller drive motor, skeg, and nose cone. The process involves disconnecting and reconnecting power, data, USB, and transducer cables, as well as replacing seals and applying marine grease and thread-locking compound (such as LOCTITE 243™) to ensure optimal sealing and secure mounting. The replacement kit includes new screws, washers, O-rings, a neoprene pad, motor seals (blue and black), a stuffing nut, a stuffing nut wrench, and marine grease, facilitating correct and durable installation.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Positioning and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike standalone transducers such as the GT54UHD-TM or GT36UHD-TM, which mount directly to the transom or motor, the \u003cstrong\u003eGarmin GT56UHD-TR\u003c\/strong\u003e is inherently tied to the Force Kraken trolling motor ecosystem. It does not enhance the motor’s sonar capabilities but serves as a maintenance component to restore original performance in case of damage or wear. Its compatibility is strictly limited to 1.2 m Force Kraken models, emphasizing its role as an integrated component rather than a universal peripheral, similar to transducers specific to certain Garmin ECHOMAP or GPSMAP fishfinders\/traceurs. Choosing an OEM replacement transducer like the GT56UHD-TR is critical to maintaining the integrity and warranty of the Force Kraken system, ensuring UHD sonar performance compliant with factory specifications.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"48 inches","offer_id":55860394918228,"sku":"010-02732-03","price":308.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_158351c7-acba-4841-8607-6a1be1e6f075.jpg?v=1779192733"},{"product_id":"garmin-gt56uhd-tr-sonde-moteur-electrique-force-pro","title":"GT56UHD-TR Transducer - Garmin Force® \/ Force® Pro Electric Motors","description":"\u003cp\u003e\n    Specifically designed for Garmin Force®, Force® Pro, and Force Kraken electric motors, the \u003cstrong\u003eGarmin GT56UHD-TR\u003c\/strong\u003e transducer (SKU: 010-02732-04) is an essential replacement kit. It maintains the ultra high-definition sonar capabilities of your system, ensuring accurate detection of fish and underwater structures. This transducer comes with all necessary parts for factory-spec installation, including screws, O-rings, neoprene pads, and grease.\n\u003c\/p\u003e\n\n\u003ch3\u003eUltra high-definition sonar performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT56UHD-TR\u003c\/strong\u003e transducer integrates three distinct sonar technologies for comprehensive and detailed coverage. It features traditional high-frequency CHIRP (High-Wide CHIRP) operating between 150 and 240 kHz with a transmit power of 350 W, reaching a maximum depth of 244 meters (800 feet) in freshwater. For scanning imaging, it includes ClearVü and SideVü modes with frequencies of 455 kHz (range 425-485 kHz), 800 kHz (range 790-850 kHz), and 1000 kHz (range 940-1100 kHz), delivering 500 W of power. These modes allow exploration to depths of up to 122 meters (400 feet) for ClearVü and 152 meters (500 feet) for SideVü, providing high image clarity and vibrant color palettes for better target and structure distinction. The transducer also integrates depth and water temperature sensors and connects via a 12-pin connector.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust design and integration for Force motors\u003c\/h3\u003e\n\u003cp\u003e\n    With dimensions of 218.5 x 51.8 x 27.7 mm (8.61 x 2.04 x 1.09 inches), the \u003cstrong\u003eGarmin GT56UHD-TR\u003c\/strong\u003e transducer is designed for optimal mechanical and electrical integration with Garmin trolling motors. Its durable construction provides an IPX7 water resistance rating, allowing immersion up to 1 meter for 30 minutes, and an operating temperature range of 0° to 50°C (32° to 122°F). The 7.6-meter (25-foot) cable provides sufficient reach for most installations. For setups requiring extended reach, a cable extension (Garmin part numbers 010-11617-42 or 010-11617-32, not included) can be used, not exceeding 9 meters (30 feet) to avoid signal degradation.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and maintenance for lasting performance\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the \u003cstrong\u003eGarmin GT56UHD-TR\u003c\/strong\u003e transducer requires careful attention to detail to ensure waterproofing and system performance. It is critical to use a medium-strength thread locking compound, such as LOCTITE 243™, and to follow specified torque values. The process involves disconnecting the motor from the battery, removing the shaft capsule and propeller motor, replacing the old transducer with the new one, and using the new parts provided in the kit. Garmin recommends professional installation to optimize performance and prevent potential damage to the device or vessel, including water intrusion that could damage the propeller motor.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860395770196,"sku":"010-02732-04","price":308.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_681f5d86-4d70-4936-91be-1f507518b5be.jpg?v=1779192753"},{"product_id":"garmin-gt56uhd-th-sonde-traversante","title":"GT56UHD-TH Thru-Hull Sonar - UHD ClearVü\/SideVü","description":"\u003cp\u003e\n    The Garmin GT56UHD-TH (part number 010-02732-10) thru-hull transducer delivers Ultra High Definition (UHD) sonar performance in demanding marine environments. Designed for recreational boaters and anglers seeking superior image clarity, this model excels with ClearVü and SideVü technologies. Unlike transom-mount transducers, its thru-hull design provides stable, turbulence-free readings, optimizing detection of underwater structures and fish even at higher speeds. It represents an advancement over non-UHD models in Garmin’s lineup, offering enhanced image resolution.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Installation and Robust Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the \u003cstrong\u003eGarmin GT56UHD-TH\u003c\/strong\u003e requires precise technical procedures compatible with fiberglass hulls (with or without core) and metal hulls. For fiberglass hulls with a core, preparation includes sealing the exposed core with marine-grade epoxy resin to prevent osmosis. Installation robustness is ensured using anti-rotation bolts (included) that prevent the transducer from turning, guaranteeing ongoing safety and performance. A wedge block is recommended if the hull’s deadrise angle exceeds 5°, allowing precise alignment of the transducer parallel to the waterline for maximum sonar accuracy.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimal Placement and System Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Selecting the mounting location is critical for optimal performance of the \u003cstrong\u003eGarmin GT56UHD-TH\u003c\/strong\u003e. It must be installed in a \"clean\" water area, free from turbulence caused by propellers, keels, chines, through-hull fittings, or water intakes\/outlets. Specific recommendations are provided for different vessel types: at the bow and near the engine for outboards\/sterndrives, at the bow and away from the propeller for inboards, or at the bow of the first chine for stepped hulls. A Garmin chartplotter software update is mandatory to ensure compatibility and fully utilize the GT56UHD-TH transducer’s capabilities.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Passing","offer_id":55860397408596,"sku":"010-02732-10","price":568.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_305cf2fb-fac4-4dd5-9541-3ffb0c1183e2.jpg?v=1779192773"},{"product_id":"garmin-sonde-gt56uhd-thp-traversante","title":"GT56UHD-THP Transom-Mount Sonar - UHD ClearVü\/SideVü Pair","description":"\u003cp\u003e\n    The Garmin GT56UHD-THP transom-mount transducer is designed for robust and permanent installation on various hull types, ensuring secure integration and optimal sonar performance for compatible Garmin chartplotters. This model requires a software update on the chartplotter to function and is positioned as a solution for users seeking stable and reliable data acquisition, even at higher speeds, compared to transom-mounted transducers more exposed to turbulence.\n\u003c\/p\u003e\n\u003ch3\u003eMounting Considerations for the Garmin GT56UHD-THP\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the Garmin GT56UHD-THP requires careful planning of the location. Detailed instructions cover specific considerations for outboard and inboard motor vessels, stepped hulls, full-keel hulls, fin-keel hulls, and displacement hulls. It is imperative to mount the transducer in an area of clean water, free from turbulence generated by strakes, struts, fittings, or water intakes\/outlets. The transducer must be positioned parallel to the fore-aft axis of the vessel. If the hull's deadrise angle exceeds 5°, the use of a fairing block is recommended to ensure the transducer is parallel to the waterline, optimizing sonar accuracy.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Installation and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The GT56UHD-THP installation procedures are suited for fiberglass hulls (with or without core) and metal hulls. They involve drilling precise holes for the transducer shaft and included anti-rotation bolts, essential for preventing device rotation during movement. Rigorous application of marine sealant is critical for perfect waterproofing, and for fiberglass core hulls, the use of high-quality marine epoxy resin is required to seal the exposed core. The mounting kit includes anti-rotation bolts, washers (24 mm rubber, 26 mm nylon, 8 mm), and nuts (35 mm for the hull, M8) for secure and robust internal hull mounting. This installation method ensures increased reliability and durable integration in the marine environment, offering a more permanent and often higher-performance alternative to transom-mount solutions.","brand":"Garmin","offers":[{"title":"Through-hull pair","offer_id":55860398653780,"sku":"010-02732-11","price":1130.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_eacc399a-fe53-4a1f-bc3a-555f4c30647c.jpg?v=1779192791"},{"product_id":"garmin-panoptix-ps70-sonde-traversante-carene","title":"Panoptix™ PS70 with transducer and fairing block","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin Panoptix PS70\u003c\/strong\u003e is an advanced through-hull transducer designed to provide real-time sonar vision, essential for demanding navigators and sport fishermen. Part of Garmin’s innovative Panoptix range, known for its live sonar capabilities such as LiveScope XR or the PS22, the PS70-TH model stands out with its robust and permanent through-hull installation. Unlike transom-mounted or trolling motor versions, the PS70-TH is optimized for deep integration into the boat’s structure, ensuring superior hydrodynamic performance and stable readings even at high speeds, positioning it as a premium solution for continuous and reliable sonar data acquisition.\n\u003c\/p\u003e\n\n\u003ch3\u003eOptimized Installation and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003ePanoptix PS70-TH\u003c\/strong\u003e transducer is compatible with fiberglass hulls (with or without core) and metal hulls, offering great installation flexibility. It is supplied with a fairing block, required for hulls with a deadrise angle of up to 20 degrees, ensuring the transducer is aligned parallel to the waterline for optimal performance. Installation requires a specific anti-rotation bolt to prevent transducer movement during navigation, guaranteeing the longevity of the installation and data accuracy. Specific tools such as 42 mm or 38 mm drill bits and hole saws are required, highlighting the technical nature of the installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Performance and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    For optimal technical performance, transducer positioning is critical: forward of engines on powerboats, and at specific distances from the keel on sailboats, always in an area of non-turbulent water. Rigorous marine sealing with marine sealant is essential at all hull contact points to prevent leaks. Garmin recommends installation by a qualified professional to ensure hull integrity and system performance. After physical installation, a software update of the Garmin chartplotter is required via support.garmin.com to fully activate the \u003cstrong\u003ePanoptix PS70\u003c\/strong\u003e features, providing a complete and integrated live sonar experience.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860399931732,"sku":"010-02768-00","price":4022.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5106234a-85d9-4621-a98c-d9371c87c837.jpg?v=1779192812"},{"product_id":"panoptix™-ps70-sonde-uniquement","title":"Panoptix™ PS70, Transducer Only","description":"\u003cp\u003e\n    The Garmin Panoptix™ PS70-TH transducer is a through-hull solution designed for integrating advanced Garmin sonar systems. Positioned as a key component for vessels requiring robust and permanent installation, it stands out for its extended compatibility with various hull types. Unlike simpler transducers such as transom-mount models, the PS70-TH is optimized for superior hydrodynamic performance and increased durability, essential for offshore navigation and demanding sport fishing applications.\n\u003c\/p\u003e\n\u003ch3\u003eVersatile installation and technical integration\u003c\/h3\u003e\n\u003cp\u003e\n    This through-hull transducer is compatible with fiberglass hulls (whether single-skin or cored) as well as metal hulls, offering great installation flexibility. It can be mounted with the included fairing block on hulls with deadrise angles up to 20 degrees, or directly in a dedicated hull pocket. Installation requires meticulous hull preparation, including drilling specific holes for the rod and anti-rotation bolt, as well as rigorous marine sealing of exposed areas, particularly for cored hulls, to prevent water infiltration.\n\u003c\/p\u003e\n\u003ch3\u003eRobust design for optimal performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Garmin Panoptix™ PS70-TH’s mounting system features an anti-rotation bolt, essential for maintaining transducer stability and preventing structural damage when the vessel is underway. This feature, combined with the requirement for precise installation (alignment with the vessel’s centerline, positioning away from turbulence generated by propellers or other appendages), ensures clean and reliable sonar data collection. Installation requires specific tools and technical skills to ensure optimal performance and equipment longevity, positioning the PS70-TH as a preferred solution for users seeking reliability and precision with compatible Garmin systems.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860401144148,"sku":"010-02768-10","price":3966.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_0cd0b181-9e76-4d6a-9bfe-7be970f8a2ad.jpg?v=1779192831"},{"product_id":"garmin-gt12m-thf-sonde-traversante-0-degre","title":"GT12M-THF 0° Through-Hull CHIRP Mid-Frequency Sonar","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT12M-THF\u003c\/strong\u003e 0-degree through-hull transducer is designed for installation on fiberglass, wood, or composite hulls. Made of brass, this model is specifically suited for vessels where the hull deadrise angle at the installation point is between 0 and 5 degrees. It is critical not to install the GT12M-THF on aluminum or steel hulls to prevent galvanic corrosion, which could lead to water ingress and damage to the vessel.\n\u003c\/p\u003e\n\u003ch3\u003eDesign and Material Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike the GT15M-THF model, which is made of stainless steel and compatible with all hull types (including aluminum and steel with provided galvanic isolation components), the \u003cstrong\u003eGT12M-THF\u003c\/strong\u003e in brass offers a robust solution for specified hull materials. Installation requires standard tools such as a drill, a 73 mm (2 7\/8 in) hole saw for solid fiberglass hulls, marine sealant, and an adjustable wrench. A software update of the Garmin chartplotter is required after installation to ensure optimal performance.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation Considerations and Angle Precision\u003c\/h3\u003e\n\u003cp\u003e\n    For optimal hydrodynamic and sonar performance, the \u003cstrong\u003eGT12M-THF\u003c\/strong\u003e must be mounted in a non-turbulent water zone, away from propellers, keels, water intakes, or any source of air bubbles. The hull deadrise angle must be measured accurately to select the 0-degree transducer. The arrow orientation on the transducer toward the boat's keel is critical to align the internal angle with the hull deadrise angle, ensuring precise and reliable sonar readings. Installation requires careful hull preparation, including core sealing for foam-core fiberglass hulls.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"0 degree","offer_id":55860427391316,"sku":"010-02867-00","price":316.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5e834737-6922-4712-bfc1-2451cfb8e001.jpg?v=1779193255"},{"product_id":"garmin-gt12m-thf-12-degres-sonde-traversante-laiton","title":"GT12M-THF 12° Through-Hull CHIRP Mid-Frequency Sonar","description":"\u003cp\u003e\n    The Garmin GT12M-THF \u003cstrong\u003ethrough-hull sonar\u003c\/strong\u003e is specifically designed for vessels with a deadrise angle of 12 degrees. Made of brass, it is optimized for installation in fiberglass, wood, or composite hulls. This brass design distinguishes it from the GT15M-THF, which is made of stainless steel and includes galvanic isolation components for aluminum or steel hulls. Installation of the GT12M-THF is strictly not recommended on metal hulls (aluminum or steel) to avoid galvanic corrosion.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and installation\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the Garmin GT12M-THF requires a 73 mm (2 7\/8 in) hole saw for fiberglass, wood, or composite hulls. A fast-curing flexible marine sealant is essential to ensure watertight integrity below the waterline. It is critical to ensure the preconfigured 12-degree angle of the transducer matches the measured deadrise angle at the installation point to guarantee optimal sonar performance. Garmin recommends updating the chartplotter software after installing the transducer for full compatibility and enhanced performance.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and usage recommendations\u003c\/h3\u003e\n\u003cp\u003e\n    The GT12M-THF transducer must be mounted in an area of clean, non-turbulent water, away from propellers, keels, water intakes, or any element likely to create air bubbles. On outboard or inboard\/sterndrive motorboats, it should be installed forward of the engine. For full-keel sailboats, a slight forward-facing angle parallel to the longitudinal axis is recommended. The transducer must only operate when fully submerged to prevent overheating damage. The brass construction ensures durability suited to its target installation environment.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"12 degrees","offer_id":55860429750612,"sku":"010-02867-01","price":320.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_b89a93b2-85ea-464c-9d39-5cad984ae67b.jpg?v=1779193279"},{"product_id":"garmin-gt12m-thf-sonde-traversante-20-degres","title":"GT12M-THF 20° Through-Hull CHIRP Mid-Frequency Sonde","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT12M-THF 20-degree through-hull sonar\u003c\/strong\u003e is a technical solution for recreational sailors and racers seeking accurate sonar data for navigation. Made of brass, this transducer is specifically designed for installation in fiberglass, wood, or composite hulls, with a 20-degree correction angle to adapt to hulls with a deadrise angle of 17 to 24 degrees. It ensures optimal compatibility with modern Garmin fishfinders and chartplotters, requiring a software update on the display for maximum performance.\n\u003c\/p\u003e\n\n\u003ch3\u003ePositioning and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The GT12M-THF model differs from the GT15M-THF, which is made of stainless steel and includes galvanic isolation components for aluminum or steel hulls. The brass GT12M-THF version is mandatory for non-metallic hulls to prevent galvanic corrosion. Its through-hull design ensures a flush installation to minimize drag and optimize sonar signal quality in non-turbulent waters. Selecting a transducer with the appropriate deadrise angle is critical for accurate readings, with the GT12M-THF 20 degrees being ideal for angles between 17 and 24 degrees.\n\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the GT12M-THF through-hull transducer requires careful attention, including drilling a 73 mm (2 7\/8 in) hole for fiberglass or composite hulls. Marine sealant is essential to ensure a watertight fit. The transducer must be positioned away from propellers, keels, and any turbulence sources to guarantee optimal performance. Garmin recommends having the installation performed by a qualified marine technician to preserve hull integrity and system reliability.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"20 degrees","offer_id":55860431061332,"sku":"010-02867-02","price":320.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_7062bc35-8955-4fae-b3f7-43103a6eee9e.jpg?v=1779193301"},{"product_id":"garmin-gt15m-thf-sonde-traversante-0-degre","title":"GT15M-THF 0° Through-Hull CHIRP Mid-Frequency Sonar","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT15M-THF 0-degree through-hull sonar\u003c\/strong\u003e is a robust underwater detection solution designed for direct integration into vessel hulls. This model is distinguished by its stainless steel construction, ensuring compatibility with a variety of hull materials, including fiberglass, wood, composites, aluminum, and steel. Its specific \"0-degree\" design is optimized for deadrise angles ranging from 0 to 5 degrees, guaranteeing optimal sonar performance and accurate seabed readings.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Hull Materials\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike models such as the GT12M-THF, which uses brass and is unsuitable for aluminum or steel hulls due to galvanic corrosion risks, the GT15M-THF in stainless steel is specifically designed for these environments. For installations on metal hulls (aluminum or steel), the use of the included galvanic isolation components is mandatory to prevent corrosion and ensure waterproofing. Installing this sonar requires a methodical approach, with specific drilling diameters: 73 mm (2 7\/8 in) for fiberglass hulls and 75 mm (3 in) for metal hulls. Precise alignment of the sonar’s top arrow toward the keel is critical so that the internal angle of the transducer element matches the vessel’s deadrise angle.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Installation Precautions\u003c\/h3\u003e\n\u003cp\u003e\n    For optimal performance, the sonar must always be used while submerged. Operating it in air can lead to overheating and damage. Garmin recommends installation by a qualified professional to ensure correct implementation, perfect waterproofing, and to avoid damage to the device or the vessel. Applying flexible, fast-curing marine sealant is essential for the waterway path. Additionally, updating the Garmin chartplotter’s software after installation is necessary to access all features. It is also important to note that the transducer cable must not be cut or spliced unless the sonar module requires bare-wire connections, to avoid voiding the warranty.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"0 degree","offer_id":55860431880532,"sku":"010-02868-00","price":601.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_2ba598eb-ff1b-4245-b48d-44b0403454ac.jpg?v=1779193323"},{"product_id":"garmin-gt15m-thf-sonde-traversante-12-degres","title":"GT15M-THF 12° Through-Hull CHIRP Mid-Frequency Sonar","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT15M-THF 12-degree through-hull transducer\u003c\/strong\u003e is a robust and versatile sonar detection solution designed for seamless integration with Garmin chartplotter and fishfinder systems. Made of stainless steel, this model stands out for its extensive compatibility with various hull materials, including fiberglass, wood, composites, aluminum, and steel. For aluminum or steel hulls, the GT15M-THF includes essential galvanic isolation components to prevent corrosion and ensure hull integrity.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike the GT12M-THF model, which is made of brass and limited to fiberglass, wood, or composite hulls, the \u003cstrong\u003eGT15M-THF\u003c\/strong\u003e in stainless steel offers superior installation flexibility. Its 12-degree angle is specifically suited to deadrise angles ranging from 6 to 16 degrees, ensuring optimal sonar beam orientation for accurate readings. Installation requires prior verification of the deadrise angle and a meticulous process including drilling a 73 mm (2 7\/8 in) hole for fiberglass hulls or a 75 mm (3 in) hole for metal hulls, applying marine sealant, and orienting the arrow toward the keel for correct internal alignment.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This transducer must be mounted in an area of clean, non-turbulent water, away from cavitation sources such as propellers or water intakes, to maximize performance. Garmin recommends professional installation and software updates to the chartplotter for optimal compatibility and efficiency. The \u003cstrong\u003eGarmin GT15M-THF\u003c\/strong\u003e is a key component for navigators seeking consistent underwater detection reliability and accuracy, seamlessly integrating into the Garmin ecosystem for an enhanced navigation experience.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"12 degrees","offer_id":55860433224020,"sku":"010-02868-01","price":645.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_70f910b0-4d77-4104-96bd-02786c5fd27f.jpg?v=1779193345"},{"product_id":"garmin-gt15m-thf-20-degres-sonde-traversante-inox","title":"GT15M-THF 20° Through-Hull CHIRP Mid-Frequency Sonar","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT15M-THF 20° through-hull sonar\u003c\/strong\u003e is a robust and versatile sonar detection solution designed for compatibility with a wide range of hull materials. Made of stainless steel, it differs from the GT12M-THF, which is made of brass and limited to fiberglass, wood, or composite hulls. The GT15M-THF model, however, is fully compatible with fiberglass, wood, composite, aluminum, and steel hulls, provided the supplied galvanic isolation components are installed for metal hulls to prevent corrosion. This transducer is optimized for deadrise angles of 17 to 24 degrees, ensuring optimal sonar performance within this range.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced Installation and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the \u003cstrong\u003eGarmin GT15M-THF 20°\u003c\/strong\u003e requires careful attention to the hull’s deadrise angle, which must be measured precisely to match the transducer’s preconfigured 20° angle. For optimal performance, the transducer must be mounted in an area of clean water, free of turbulence caused by propellers, keels, or other hull appendages. Specific tools are required for installation, including 73 mm (2 7\/8 in) hole saws for fiberglass and 75 mm (3 in) for metal, as well as marine sealant to ensure a watertight seal. Correct alignment of the transducer’s arrow toward the keel is critical for internal angle alignment. It is also necessary to update the Garmin display’s software after installation to ensure full integration and functionality.\n\u003c\/p\u003e\n\u003ch3\u003eDurable Design and Targeted Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The stainless steel construction of the \u003cstrong\u003eGarmin GT15M-THF 20°\u003c\/strong\u003e transducer ensures enhanced durability in marine environments, resisting corrosion and mechanical stress. The need for galvanic isolation on aluminum and steel hulls highlights Garmin’s thoughtful engineering to protect the vessel’s integrity. Compared to transducers with fixed or less specific angles, the GT15M-THF 20° offers a targeted solution for boats where the deadrise angle at the chosen location matches this specification, maximizing the efficiency of seabed and underwater target detection. This transducer integrates seamlessly with compatible Garmin displays, providing clear and reliable sonar data for navigation and fishing.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"20 degrees","offer_id":55860435222868,"sku":"010-02868-02","price":600.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_4fad0544-db81-4388-a834-09aef22ce97f.jpg?v=1779193368"},{"product_id":"garmin-gt17m-thf-0-degre-sonde-traversante","title":"GT17M-THF 0° CHIRP through-hull transducer","description":"\u003cp\u003e\n    The Garmin GT17M-THF 0-degree through-hull transducer is an advanced technical solution for underwater detection, designed for robust and versatile integration across a wide range of vessels. Featuring a stainless steel housing, this transducer ensures enhanced durability and optimal resistance to demanding marine environments. It is specifically suited for fiberglass, wood, composite, aluminum, and steel hulls.\n\u003c\/p\u003e\n\u003ch3\u003eHull installation and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The design of the \u003cstrong\u003eGarmin GT17M-THF\u003c\/strong\u003e includes essential galvanic isolation components for installations on aluminum or steel hulls. This feature is critical to prevent galvanic corrosion, which could lead to water intrusion around the transducer and damage to the hull. Installation without these components on metal hulls is strictly not recommended. The 0-degree internal angle of this transducer is optimized for hulls with a deadrise angle of 0 to 5 degrees, ensuring maximum sonar performance and accurate readings. For hulls with different deadrise angles, Garmin offers other GT17M-THF models with 12- or 20-degree angles, allowing precise adaptation to each vessel’s geometry.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance and system integration\u003c\/h3\u003e\n\u003cp\u003e\n    For optimal performance, the transducer must be mounted in a non-turbulent water zone, away from propellers, water intakes, discharges, or any other source of air bubbles. On outboard and sterndrive vessels, mounting at the bow and near the engine(s) is recommended. For inboard vessels, the transducer should be installed at the bow and clear of the propeller and propeller shaft. A software update of the Garmin chartplotter is required after installing this device to ensure full compatibility and functionality. Installation of the GT17M-THF requires careful attention, including drilling a 98 mm (3 7\/8 in) hole for fiberglass hulls and a 101 mm (4 in) hole for metal hulls, as well as applying marine sealant for a watertight seal. Regular checks of watertightness after launching are essential.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"0 degree","offer_id":55860449870164,"sku":"010-02930-00","price":957.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_4c06088c-7bf5-4ebe-8228-f63b1020b080.jpg?v=1779193666"},{"product_id":"garmin-gt17m-thf-12-degres-sonde-traversante","title":"GT17M-THF 12° Through-Hull CHIRP Mid-Frequency Sonde","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT17M-THF 12° through-hull sonar\u003c\/strong\u003e is a robust and versatile detection solution designed for reliable integration across a wide range of vessels. Its stainless steel housing ensures enhanced durability in marine environments, allowing installation on fiberglass, wood, composite, aluminum, or steel hulls.\n\u003c\/p\u003e\n\u003ch3\u003eInstallation and versatility of the GT17M-THF sonar\u003c\/h3\u003e\n\u003cp\u003e\n    This model features a 12° internal angle, specifically adapted to compensate for hull drift angles ranging from 6° to 16°, ensuring optimal orientation of the transducer element for precise sonar performance. When installing on aluminum or steel hulls, the use of the included galvanic isolation components is mandatory to prevent corrosion and maintain hull watertight integrity. Installation requires specific tools, such as 98 mm (3 7\/8 in) hole saws for fiberglass and 101 mm (4 in) for metal, along with a flexible, fast-curing marine sealant for watertight sealing below the waterline.\n\u003c\/p\u003e\n\u003ch3\u003eRecommendations and maintenance for the Garmin GT17M-THF sonar\u003c\/h3\u003e\n\u003cp\u003e\n    Garmin recommends professional installation by a qualified technician to ensure optimal performance and avoid damage to the device or vessel. A software update for the Garmin chartplotter is required after installing this device. Cabling must be routed carefully, away from potential interference sources such as engines and other wiring, using grommets to protect the cable when passing through bulkheads. For maintenance, applying water-based antifouling paint is an option to prevent fouling, and it is critical to check for leaks before leaving the boat in the water for an extended period. The \u003cstrong\u003eGarmin GT17M-THF 12° through-hull sonar\u003c\/strong\u003e stands as a reliable technical choice for demanding navigators, requiring careful installation but offering robustness and extended compatibility compared to transom-mounted or internal transducers, which are less suited to all hull configurations and marine conditions.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"12 degrees","offer_id":55860452360532,"sku":"010-02930-01","price":885.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_be13740a-b741-4b18-b9d1-6c3346f11079.jpg?v=1779193685"},{"product_id":"garmin-gt17m-thf-sonde-traversante-20-degres","title":"GT17M-THF 20° Through-Hull CHIRP Mid-Frequency Sonde","description":"\u003cp\u003e\n    The \u003cstrong\u003eGarmin GT17M-THF 20° through-hull transducer\u003c\/strong\u003e is designed to provide reliable and stable CHIRP sonar performance, specifically suited for vessels with a deadrise angle between 17 and 24 degrees. Made of stainless steel, this transducer ensures enhanced durability and broad compatibility with various hull materials, including fiberglass, wood, composites, aluminum, and steel.\n\u003c\/p\u003e\n\u003ch3\u003eHull Material Installation and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    Installing the GT17M-THF transducer requires careful attention to the hull material. For aluminum or steel hulls, the use of the included galvanic isolation components is mandatory to prevent galvanic corrosion and water intrusion around the transducer. This requirement highlights Garmin's thoughtful design for secure and durable integration, unlike simpler transducers that may lack this essential protection on metal hulls. Installation is recommended by a qualified marine professional to ensure optimal performance and avoid damage.\n\u003c\/p\u003e\n\u003ch3\u003ePerformance Optimization and Positioning\u003c\/h3\u003e\n\u003cp\u003e\n    The GT17M-THF 20° model distinguishes itself from the 0° or 12° versions by its ability to precisely compensate for the specific deadrise angle, ensuring the transducer element is correctly oriented toward the bottom for maximum detection. For fiberglass hulls, a 98 mm hole is required, while metal hulls require a 101 mm hole. The transducer must be installed in a clean water area, free from turbulence created by propellers, keels, water intakes, or other equipment. Optimal positioning is critical: ahead of the engine for outboards, away from the propeller for inboards, or between engines for twin-engine setups. A software update for the Garmin chartplotter is required after installation to ensure compatibility and maximum performance. Regular maintenance with water-based antifouling paint and cleaning with non-aggressive solvents will extend the transducer's lifespan.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"20 degrees","offer_id":55860453704020,"sku":"010-02930-02","price":962.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_1169427e-a0d3-48be-b7fb-2e781a94aa98.jpg?v=1779193703"},{"product_id":"garmin-airmar-b117-sonde-traversante","title":"Airmar B117 - Bronze Through-Hull Transducer 600W (50\/200kHz) + Temperature - (8-pin)","description":"\u003cp\u003e\n    The \u003cstrong\u003eAirmar B117\u003c\/strong\u003e is a bronze through-hull transducer rated at 600W, operating at 50\/200kHz frequencies, ideal for depth and temperature applications. Compatible with Garmin sonar systems, this transducer offers excellent value for recreational boats and fishing vessels. Its low-profile design reduces drag under the hull, while the bronze housing ensures increased durability in marine environments. The 7.6-meter (25-foot) cable with an 8-pin connector facilitates integration into existing installations. This model is an industry standard for low-profile transducers, providing a good balance between shallow-water target detail (200 kHz) and deep-water bottom tracking (50 kHz).\n\u003c\/p\u003e\n\u003ch3\u003eKey Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    The B117 delivers 600W RMS power and operates at 50\/200kHz frequencies. Its beam angle varies by frequency, offering extended coverage for precise detection. It is compatible with continuous wave (CW) for reliable depth readings and includes an option for water temperature measurement. This transducer is designed for fiberglass or wooden hulls, and installation requires a specific hole size depending on hull type. It is an established model, though newer technologies have superseded it, but remains a solid choice for standard installations.\n\u003c\/p\u003e\n\u003ch3\u003eCompatibility and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eAirmar B117\u003c\/strong\u003e is supplied with a rubber gasket for watertight installation but does not include additional cables or mounting accessories. It is compatible with a wide range of Garmin chartplotters and sonar systems, as well as other NMEA 0183-compatible brands. It is essential to follow the provided installation instructions to ensure optimal performance and prevent leaks. This transducer is a critical component for navigation and fishing systems, providing accurate and reliable depth and water temperature readings.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860540670292,"sku":"010-10182-21","price":227.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_cee55f64-0b30-404c-bbd8-86b7f9c743b5.jpg?v=1779194159"},{"product_id":"garmin-airmar-b744v-sonde-traversante-bronze-600w-50-200khz","title":"Airmar B744V – bronze through-hull transducer 600W (50\/200kHz) with fairing block + surface speed + temperature – (8-pin)","description":"\u003cp\u003e\n    The Garmin Airmar B744V transducer is a 600W through-hull multisensor transducer designed for boats up to 9 meters in length. This bronze transducer integrates depth, speed, and temperature functions, providing a compact solution that minimizes the number of hull penetrations required. Operating at 50 kHz and 200 kHz frequencies, it allows bottom detection up to 366 meters at 50 kHz and 213 meters at 200 kHz, making it suitable for mid-depth navigation and coastal fishing applications.\n\u003c\/p\u003e\n\n\u003ch3\u003eAcoustic Performance and Accuracy\u003c\/h3\u003e\n\u003cp\u003e\n    With a 600W RMS power output, the Airmar B744V transducer delivers high-quality data for various inland and coastal fishing applications. The 45° beam at 50 kHz provides wide coverage for detecting fish schools, while the 12° beam at 200 kHz offers precise bottom structure definition and better target separation. The speed range ensures reliable measurements even at high speeds, with excellent results up to 30 knots (34 MPH), a key advantage for planing hulls where signal stability is critical.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    The B744V is a bronze through-hull transducer suitable for fiberglass or wooden hulls; it must not be installed on metal hulls due to the risk of electrolytic corrosion. Installation requires a 51 mm (2-inch) hole and the mandatory use of the high-performance fairing block provided. This fairing block ensures laminar water flow around the sensor, improving performance at high speeds and allowing stable readings up to 24° of deadrise angle. The 8-pin connector ensures direct compatibility with compatible Garmin systems, facilitating integration into the vessel’s existing electronics ecosystem.\n\u003c\/p\u003e\n\n\u003ch3\u003eDesign and Maintenance\u003c\/h3\u003e\n\u003cp\u003e\n    Equipped with a patented self-sealing retractable system, the transducer allows removal of the paddlewheel insert for cleaning or maintenance without requiring the boat to be dry-docked. Fins on the paddlewheel cavity optimize speed accuracy in cross-currents. For optimal watertightness, all O-rings must be lubricated, and a safety lanyard must be attached to prevent the insert from dislodging. For thicker hulls or more pronounced deadrise angles, the B744VL version with a longer shaft is available, offering greater installation flexibility compared to this standard model for specific boat configurations.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55860543848788,"sku":"010-10183-22","price":416.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_46edef3b-647c-44cf-954e-34e451e4e306.jpg?v=1779194193"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/sondes-transducteurs.png?v=1774455832","url":"https:\/\/skysat.fr\/en\/collections\/fishfinders-transducers.oembed","provider":"Skysat","version":"1.0","type":"link"}