{"title":"Navigation center","description":"\u003ch2\u003e Navigation systems: orchestrating data on board\u003c\/h2\u003e\n\n\n \u003cp\u003eThe navigation system is the brain of your onboard electronics. It aggregates information from various sensors (wind vane\/anemometer, log\/speedometer, depth sounder, compass) to provide a complete view of the marine environment. At Skysat, drawing on our experience in offshore racing, we guide you in choosing and integrating a high-performance, reliable navigation system tailored to your needs.\u003c\/p\u003e\n\n\u003cp\u003e Here you will find a rigorous selection of control units, from the simplest models to the most sophisticated systems, as well as advice on how to optimize their installation and configuration.\u003c\/p\u003e\n\n\n\u003ch2\u003e The sensors: the source of the data\u003c\/h2\u003e\n\n\n\u003cp\u003e A navigation system's value depends entirely on the quality of the sensors that power it. Therefore, choosing the right sensors is crucial for obtaining accurate and reliable information, essential for navigation and safety.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eWind vane-anemometer:\u003c\/strong\u003e Measures wind direction and speed, crucial data for optimizing sail trim and anticipating weather conditions. Wired or wireless models, with or without a heel angle sensor.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eLog\/speedometer:\u003c\/strong\u003e Indicates the boat's speed relative to the water. Various technologies exist, from the traditional propeller log to the more precise ultrasonic log, which is less prone to fouling.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eDepth sounder:\u003c\/strong\u003e Measures the water depth under the keel. Modern depth sounders offer advanced features such as fish detection and seabed mapping.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCompass:\u003c\/strong\u003e Provides heading information. Fluxgate compass, solid-state compass (AHRS) for increased accuracy, especially in case of significant heel.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e Integration and compatibility: the key to a high-performing system\u003c\/h2\u003e\n\n\n \u003cp\u003eIntegrating the various components of the navigation system is a crucial aspect that should not be overlooked. Ensure the compatibility of the sensors and the system, and prioritize standardized communication protocols such as NMEA 2000 or SeaTalk NG for simplified installation and optimal scalability.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eNMEA 2000:\u003c\/strong\u003e Standardized digital communication protocol, allowing the exchange of data between different electronic devices on board.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSeaTalk NG:\u003c\/strong\u003e Proprietary communication protocol developed by Raymarine, compatible with NMEA 2000 via an adapter.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eInterfaces:\u003c\/strong\u003e Check for the presence of the necessary interfaces (NMEA 0183, NMEA 2000, SeaTalk NG) on the control unit and sensors.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMultiplexers:\u003c\/strong\u003e Allow data from different sources to be combined and transmitted to a single device.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003ch2\u003e data display and processing\u003c\/h2\u003e\n\n\n \u003cp\u003eThe navigation system must be able to display data clearly and intuitively, and process it to provide useful navigational information. Some models offer advanced features such as true wind calculation, speed polar diagrams, or data display on a multifunction screen.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMultifunction displays:\u003c\/strong\u003e Display data from the navigation system, as well as other information (maps, radar, AIS).\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eDedicated displays:\u003c\/strong\u003e Offer a clear and concise visualization of key data (heading, speed, depth, wind).\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eNavigation software:\u003c\/strong\u003e Allows you to view and analyze data from the power plant on a computer or tablet.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAlarms:\u003c\/strong\u003e Configurable to alert the navigator in case of exceeding thresholds (depth, strong wind, etc.).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e 💡 \u003cstrong\u003eSkysat's advice\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eWhen installing your wind turbine, pay particular attention to the position of the sensors. A poorly positioned wind vane\/anemometer can be affected by turbulence created by the mast or sails, thus distorting wind measurements. Feel free to contact us for a personalized assessment of your system.\u003c\/p\u003e","products":[{"product_id":"b-g-code-deverrouillage-cpu-h5000-hercule-performance","title":"Unlock code for H5000 Hercules CPU to Performance","description":"\u003cp\u003eThe \u003cstrong\u003eH5000 Hercules to Performance CPU Unlock Code\u003c\/strong\u003e is a software upgrade to evolve a B\u0026amp;G H5000 Hercules navigation processor to the \"Performance\" feature set. This code activation (SKU 000-11759-001) is specifically designed for large offshore cruising sailboats, racing multihulls, and superyachts that require data management from complex and redundant instrumentation systems.\u003c\/p\u003e\n\n\u003ch3\u003eUpgrade H5000 Hercules CPU to Performance\u003c\/h3\u003e\n\u003cp\u003eThe B\u0026amp;G H5000 system is a benchmark for sailing navigation, structured in several performance levels. The H5000 Hercules CPU is the base solution for racing sailboats, already integrating advanced functions such as 3D motion correction and polar data processing. This unlock code provides access to the higher \"Performance\" level, adding essential calculation capabilities for vessels equipped with multiple sensors (dual wind sensors, dual rudders) and multiple appendages (daggerboards, foils).\u003c\/p\u003e\n\n\u003ch3\u003eFeatures Unlocked by the Performance Level\u003c\/h3\u003e\n\u003cp\u003eThe activation of the Performance license enhances the H5000 Hercules CPU with critical calculation and data management functions for high performance and safety on complex units. Added features include:\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSupport for two wind sensors:\u003c\/strong\u003e Ideal for large sailboats where a single wind sensor can be masked by sails, ensuring continuous wind data reliability.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDual rudder support:\u003c\/strong\u003e Allows monitoring of each rudder's angle and calculates the toe-in angle, crucial data for performance optimization on modern multihulls and monohulls.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMultiple daggerboard tracking:\u003c\/strong\u003e Manages position data for port, starboard, and center daggerboards, and calculates active draft in real-time.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRate of Turn data:\u003c\/strong\u003e Provides an accurate measurement of the vessel's rotational speed.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGround Wind calculation:\u003c\/strong\u003e Calculates the speed and direction of the wind relative to the ground, strategic information for offshore navigation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723758821716,"sku":"000-11759-001","price":1248.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/Photoproduit.png?v=1774306257"},{"product_id":"b-g-h5000-code-deverrouillage-systeme-hydra-5000-logiciel","title":"H5000 Hydra 5000 System Unlock Code","description":"\u003cp\u003eThe \u003cstrong\u003eB\u0026amp;G\u003c\/strong\u003e brand \u003cstrong\u003eHydra 5000 system unlock code\u003c\/strong\u003e is an essential software upgrade to unlock the full potential of the H5000 central processing unit (CPU). Designed for offshore cruising sailboats and demanding racers, this code transforms a basic instrumentation system into a high-precision tactical computing platform.\u003c\/p\u003e\n\u003ch3\u003eTenfold Computing Performance\u003c\/h3\u003e\n\u003cp\u003eActivating the Hydra level unlocks advanced navigation algorithms by leveraging the computing power of the dual ARM processors integrated into the H5000 CPU. This upgrade enables ultra-fast and stabilized processing of data from bidirectional NMEA 0183 networks, the standard CAN-bus network, and four configurable analog inputs (0-5V). It activates exclusive features such as the B\u0026amp;G Performance wind filter, the SailSteer composite display, and the start line tool, which are essential for optimizing sailing performance.\u003c\/p\u003e\n\u003ch3\u003ePositioning within the B\u0026amp;G H5000 Range\u003c\/h3\u003e\n\u003cp\u003eThe H5000 processor architecture was designed to be fully scalable. This Hydra unlock code represents the first optimization tier of the range. It offers increased accuracy compared to the standard system, perfect for fast cruising and club racing. For professional offshore racing programs requiring complex target calculations and dynamic polars, this system can be further upgraded to the higher Hercules and Performance levels offered by B\u0026amp;G.\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723760722260,"sku":"000-11760-001","price":2154.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/Photoproduit_0469620f-ae66-487d-82e3-6295f0ff8cb9.png?v=1774307842"},{"product_id":"b-g-h5000-extension-analogique-module-nmea2000","title":"H5000 Analog Extension","description":"\u003cp\u003e\n    The B\u0026amp;G H5000 \u003cstrong\u003eAnalog Expansion\u003c\/strong\u003e (part number 000-11725-001) is a crucial interface module for H5000 instrument systems. It allows the integration of third-party and specific sensors, whether they transmit analog or pulse signals, significantly expanding data collection capabilities. Designed for performance, this expansion is essential for sailors demanding advanced customization and increased accuracy, whether cruising or racing at a high level.\n\u003c\/p\u003e\n\n\u003ch3\u003eExtended Integration Capabilities for the H5000 System\u003c\/h3\u003e\n\u003cp\u003e\n    This module stands out within the B\u0026amp;G H5000 range due to its specialization. Unlike the serial expansion module, the H5000 \u003cstrong\u003eAnalog Expansion\u003c\/strong\u003e is specifically dedicated to converting analog signals to the NMEA 2000 network. It features six analog inputs (0-5V) and two pulse inputs (TTL 0-5V). This configuration allows for the connection of a multitude of essential sensors, such as wind transducers, speed sensors, rudder angle sensors, mast rotation sensors, or load cells and potentiometers. Each input is fully configurable, offering maximum flexibility for assignment to predefined functions or custom names.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Architecture and Marine Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for the marine environment, the H5000 \u003cstrong\u003eAnalog Expansion\u003c\/strong\u003e benefits from IP66 protection, ensuring high sealing against dust and powerful water jets. The module is powered directly by the NMEA 2000 bus (1 LEN), simplifying its installation and capable of providing power to connected sensors. Its connectivity via the NMEA 2000 network ensures reliable data transmission to the H5000 Central Processing Unit (CPU). Configuration, calibration, and diagnostics are manageable via the H5000 system's web interface, accessible from any connected device, facilitating commissioning and maintenance. With a typical consumption of 0.6W (50 mA @ 12V), this module is optimized for 12V DC marine installations (9-16V range). Its compliance with IEC\/EN 60945 and CE standards attests to its robustness and safety.\n\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723761115476,"sku":"000-11725-001","price":800.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_43a7801f-34dd-40f2-ad3a-c7d3b1527171.jpg?v=1772631375"},{"product_id":"b-g-h5000-extension-serie-nmea0183-nmea2000","title":"H5000 Series Extension","description":"\u003cp\u003e\n    The \u003cstrong\u003eH5000 B\u0026G\u003c\/strong\u003e serial expansion module is a key component for advanced integration of H5000 instrumentation systems. It is specifically designed to centralize data from external navigation equipment communicating via serial protocols, notably NMEA 0183. Unlike the H5000 analog expansion module, which handles analog sensors, this expansion focuses on acquiring and transmitting digital serial data, ensuring compatibility with a wide range of third-party or older instruments, essential for performance and racing sailboats.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and network integration\u003c\/h3\u003e\n\u003cp\u003e\n    The H5000 serial expansion provides robust connectivity with two configurable bidirectional serial ports (COM), compatible with the NMEA 0183 standard. It also integrates a Micro-C NMEA 2000 network port (1 LEN), enabling direct and seamless integration into the H5000 system’s main bus. This architecture facilitates the centralization of critical data from devices such as B\u0026G HGSC gyrocompasses, GPS sensors, or other heading sensors. Flexibility is ensured by configuring NMEA 0183 sentences for input and output, as well as baud rate and refresh rate, adjustable via the H5000 processor’s web interface for precise adaptation to connected equipment.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications and marine reliability\u003c\/h3\u003e\n\u003cp\u003e\n    Designed for demanding marine environments, the H5000 serial expansion module operates on a nominal 12V DC power supply (10 to 16V DC range) with low power consumption of typically 0.6W (50 mA @ 12V) and requires protection by a 5A fuse. Its IP66 waterproof rating ensures effective protection against water splashes and dust. It operates within an extended temperature range from -10°C to +55°C. With compact dimensions of 61 x 131 x 45 mm and a weight of 0.17 kg, it installs discreetly on board. Compliance with IEC\/EN 60945 attests to its robustness and reliability for professional marine applications, positioning it as a reliable solution compared to competitors like Garmin or Raymarine for critical serial data integration.\n\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723761312084,"sku":"000-11726-001","price":699.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_e810d926-ca2f-4ee6-a793-32072c68e520.jpg?v=1772631395"},{"product_id":"b-g-processeur-hercules-centrale-navigation","title":"Hercules® Processor","description":"\u003cp\u003eThe B\u0026amp;G Hercules® processor is the central brain of your instrumentation system, specifically designed to provide the highest precision data for racers and performance cruisers. As the successor to the renowned H5000 series, it integrates an ultra-fast quad-core processor that ensures instant calculations and seamless responsiveness, essential for making critical race decisions.\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Performance and Calculations for Racing\u003c\/h3\u003e\n\u003cp\u003eHercules® goes beyond simple data collection. It offers a comprehensive suite of advanced functions, including wind data correction based on heel and boat movement (requires an external motion sensor) for increased reliability. Racers can utilize polar tables to display performance targets and optimize their speed. The system also includes intelligent start line functions for perfect positioning. Detailed logging of navigation data, with the ability to add custom events like sail changes, allows for in-depth post-navigation analysis via the B\u0026amp;G app.\u003c\/p\u003e\n\n\u003ch3\u003eSystem Integration and Connectivity\u003c\/h3\u003e\n\u003cp\u003eDesigned for maximum flexibility, the Hercules® processor seamlessly integrates with B\u0026amp;G Nemesis™ displays, Vulcan™ or Zeus® chartplotters, and Triton™ 2 displays. Configuration is done via a modern and intuitive web interface, accessible via Ethernet or the B\u0026amp;G app. Its extensive connectivity is designed for the most complex setups, including multihulls requiring dual sensors (wind, rudder). For even greater needs, the system can be expanded with the Hercules® Expansion module.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe processor features comprehensive connectivity to centralize all your sensor information:\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEthernet Network:\u003c\/strong\u003e 2 x 100Mbps ports (RJ45)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNMEA 2000® Network:\u003c\/strong\u003e 1 x Micro-C port\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNMEA 0183 Series:\u003c\/strong\u003e 2 channels\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e 9 x 12-bit channels\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePulse Inputs:\u003c\/strong\u003e 3 channels\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWireless Connectivity:\u003c\/strong\u003e Bluetooth 4.0\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e 1 x Micro SD card port (up to 256 GB)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDedicated I\/O:\u003c\/strong\u003e 1 x MOB input, 2 x configurable alarm outputs\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 9.0 - 31.2 V DC (12\/24V compatible)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWaterproofing:\u003c\/strong\u003e IPX6 and IPX7\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 230 x 192 x 63 mm\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723767734612,"sku":"000-15135-001","price":2514.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_18b7da2d-6cf5-4fc7-84d0-7c3938545a95.png?v=1772631747"},{"product_id":"b-g-processeur-hercules-expansion-module-extension","title":"Hercules® expansion processor","description":"\u003cp\u003eThe \u003cstrong\u003eB\u0026G Hercules® Expansion Processor\u003c\/strong\u003e is an extension module designed to vastly increase the data collection capabilities of B\u0026G navigation systems. It works in conjunction with main navigation processors such as the Triton™ Edge™, Hercules® or Hercules® WTP, enabling the integration of a wide range of analog and serial sensors for comprehensive performance analysis, whether in regattas or high-performance cruising.\u003c\/p\u003e\n\n\u003ch3\u003eMassive expansion of input\/output capabilities\u003c\/h3\u003e\n\u003cp\u003eThis module adds specialized connectivity to your navigation hub. It features \u003cstrong\u003e9 analog 12-bit channels\u003c\/strong\u003e, \u003cstrong\u003e3 pulse channels\u003c\/strong\u003e and \u003cstrong\u003e2 bidirectional serial ports (NMEA 0183 compatible)\u003c\/strong\u003e. This setup allows connection of non-NMEA 2000 sensors such as load cells, custom angle sensors, existing analog instruments or other serial devices. Connection to the main processor is via one of two 100BASE-T Ethernet ports, ensuring stable, high-speed data transfer. For safety, it also includes 2 configurable alarm outputs and a dedicated input for a \"Man Overboard\" (MOB) button.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional integration and configuration\u003c\/h3\u003e\n\u003cp\u003eThe Hercules® Expansion Processor seamlessly integrates into the B\u0026G ecosystem. Collected data is centralized by the main processor and broadcast across the network for display on Triton™ 2, H5000, Nemesis™ displays, HV instruments, and Vulcan™ and Zeus® chartplotters. Input configuration, sensor calibration and data management are handled via an intuitive web interface, accessible via Ethernet from a computer or through the B\u0026G app. Software updates are installed simply via the microSD™ card slot (up to 256 GB, FAT32 format).\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eBuilt for the marine environment, the enclosure is waterproof to IPX6 and IPX7 standards. It operates on 12V or 24V DC power (9.0 to 31.2 V DC range), with a maximum consumption of 19 W at 13.8 V (3A fuse recommended). Operating temperature range is from -15 °C to +55 °C. The unit weighs 0.70 kg and includes full connectivity: 2 Ethernet ports (RJ45), 2 NMEA 0183 serial ports, 9 analog inputs, 3 pulse inputs, 2 alarm outputs and a microSD™ port.","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723767898452,"sku":"000-15137-001","price":1350.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_9641128a-9e51-4f24-a3e4-658bd2f76441.png?v=1772631770"},{"product_id":"b-g-processeur-triton-edge-centrale-navigation-wifi","title":"Triton Edge processor","description":"\u003cp\u003e \nThe \u003cstrong\u003eB\u0026amp;G Triton Edge\u003c\/strong\u003e processor is the central brain of your navigation instrumentation system, designed for demanding cruisers and racers. It processes raw sensor data to deliver advanced, highly accurate calibrated navigation metrics. The Triton Edge ensures seamless integration with B\u0026amp;G Triton and Nemesis™ displays, as well as Vulcan™ and Zeus™ chartplotters, enriching the entire B\u0026amp;G ecosystem with next-level performance insights.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Advanced performance and navigation data\u003c\/h3\u003e\n\n\u003cp\u003e \nThe \u003cstrong\u003eTriton Edge B\u0026amp;G\u003c\/strong\u003e 's microprocessor performs complex calculations to deliver enhanced navigation data. It provides advanced starting line calculations, more accurate true wind data through auto-calibration routines, and wind correction that accounts for the boat's heel and trim. The system also enables detailed boat speed calibration for maximum data reliability. Setup and calibration are simplified via the AutoCal routines, accessible through the integrated web interface.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Connectivity and system integration\u003c\/h3\u003e\n\n\u003cp\u003e \nThe \u003cstrong\u003eB\u0026amp;G Triton Edge\u003c\/strong\u003e features an NMEA 2000 port (Micro-C connector), a 100BASE-T Ethernet port (5-pin connector), and internal Wi-Fi connectivity (802.11 b\/g\/n). This triple connectivity allows for extensive integration with onboard modules, sensors, and displays. An integrated web server, accessible via Wi-Fi or Ethernet, simplifies configuration, commissioning, and data management without requiring a dedicated screen. Integration with the B\u0026amp;G Companion App enables navigation data recording, cloud upload, and detailed analysis for performance monitoring.\n\u003c\/p\u003e\n\n\n\u003ch3\u003e Technical specifications of the Triton Edge processor\u003c\/h3\u003e\n\n\u003cp\u003e \nThe processor operates on a 12\/24 V DC power supply (9.0 to 31.2 V DC range) with a maximum power consumption of 4 W, and a 1 A fuse is recommended for protection. Its waterproof housing is IPX6 and IPX7 certified, ensuring protection in harsh marine conditions. The operating temperature range is -15 °C to 55 °C. The unit weighs 0.26 kg. To avoid interference, a safety distance of 50 cm from magnetic compasses must be maintained during installation.\n\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":53723768226132,"sku":"000-15134-001","price":1332.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_5a18b768-6c7a-4f50-8b98-adc5cfb6c0c5.jpg?v=1772631795"},{"product_id":"pixel-sur-mer-processeur-exocet-blue-gestion-donnees-marine","title":"Exocet Blue Processor","description":"\u003cp\u003eThe \u003cstrong\u003eExocet Blue Processor by Pixel sur Mer\u003c\/strong\u003e is an advanced multi-protocol and multi-interface data acquisition and management system, specifically designed for the extreme environments of competitive sailing but adaptable to a wide range of maritime and aeronautical projects. Positioned as an all-in-one solution, it stands out for its ability to collect, process, and display a large volume of timestamped data with precision, providing real-time monitoring locally or remotely.\u003c\/p\u003e\n\u003ch3\u003eAdvanced Data Acquisition and Processing\u003c\/h3\u003e\u003cp\u003eThe Exocet Blue ensures robust acquisition and processing of data from multiple sensors, including instrumentation (fiber optics, load sensors, detection, position, energy, ballast), hydraulics (pressures, forces, cylinder positions), propulsion (engine RPM, temperatures, consumption), and navigation (wind, attitudes, performance, GPS, environment). It also integrates a customizable alert system and an intuitive, responsive web interface for data visualization, compatible with displays such as B\u0026G, Simrad, Garmin, and NKE. Unlike more generic solutions, the Exocet Blue is optimized for performance and reliability under critical conditions.\u003c\/p\u003e","brand":"Pixel sur Mer","offers":[{"title":"","offer_id":53723783594324,"sku":"200-001-002","price":9990.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/exocet_bleu_3601.png?v=1778229570"},{"product_id":"pixel-processeur-exocet-essential-centrale-navigation","title":"Exocet Essential Processor","description":"\u003cp\u003e The \u003cstrong\u003eExocet essential processor\u003c\/strong\u003e by Pixel sur Mer is an all-in-one navigation hub designed for offshore racing, integrating essential data management, autopilot, and safety functions. This robust and standardized unit adapts to a wide range of projects, making IMOCA and Ultim-proven technology accessible to all sailors. The 2025 version introduces significant improvements, including enhanced Man Overboard (MOB) functionality and new graph-based analysis tools.\u003c\/p\u003e\n\u003ch3\u003eKey Features and Data Processing\u003c\/h3\u003e\u003cp\u003eThe Exocet essential excels in advanced true wind and leeway calculations, providing reliable performance indicators. It handles data collection, processing, and retransmission, with 1Hz logging for detailed analysis. A customizable alert system notifies the crew of sensor failures or weather changes. A major feature is automatic sensor failure management, allowing the system to switch to another sensor in case of failure, ensuring continuous data flow.\u003c\/p\u003e\n\u003ch3\u003eAutopilot and Trajectory Optimization\u003c\/h3\u003e\u003cp\u003eThis processor offers performance and safety overlays for autopilot systems, including optimization for B\u0026G H5000 systems. These overlays provide intelligent trajectory commands, improving boat behavior and ensuring faster, safer steering. The Man Overboard (MOB) function is a critical safety feature, capable of initiating a trajectory change with autopilot commands to stop the boat, and even automatic Jon Buoy deployment (if equipped). The system is compatible with navigation software such as Adrena and Expedition.\u003c\/p\u003e","brand":"Pixel sur Mer","offers":[{"title":"","offer_id":53723783823700,"sku":"200-003-001","price":14590.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/exocet_noir_360.png?v=1778229615"},{"product_id":"pixel-sur-mer-processeur-exocet-silver-centrale-navigation","title":"Exocet Silver Processor","description":"\u003cp\u003e The \u003cstrong\u003eExocet Silver processor\u003c\/strong\u003e from Pixel sur Mer is an innovative navigation computer, specifically developed for the demands of large racing sailboats and adaptable to all maritime projects requiring enhanced performance and reliability. This system positions itself as a premium solution, distinguishing itself from the Exocet Essential, which is more entry-level and all-in-one, through its advanced integration and customization capabilities.\u003c\/p\u003e\n\u003ch3\u003eAdvanced Technical Features\u003c\/h3\u003e\u003cp\u003e The Exocet Silver integrates advanced true wind and leeway calculation, providing essential precision for performance optimization during navigation. It ensures the collection, processing, and retransmission of navigation data, with 1Hz logging for detailed post-navigation analysis. A key feature is automatic sensor failure management, allowing the system to switch to alternative sensors in case of failure, thus ensuring continuity and reliability of critical data. The system also offers customizable navigation data display on various devices, including PCs, tablets, smartphones, compatible watches, and is natively compatible with displays from leading brands such as B\u0026G, Simrad, Garmin, and NKE.\u003c\/p\u003e","brand":"Pixel sur Mer","offers":[{"title":"","offer_id":53723783987540,"sku":"200-002-001","price":15200.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/exocet_argent_360.png?v=1778229593"},{"product_id":"furuno-adaptateur-nmea2000-micro5c-derivation-4-voies","title":"NMEA2000 MICRO5C MFFFFF Certified Adapter","description":"\u003cp\u003e\n    The \u003cstrong\u003eNMEA2000 MICRO5C MFFFFF certified FURUNO adapter\u003c\/strong\u003e (reference OD-NAW-MM1MF1MF4001) is a key component for establishing and extending NMEA2000 networks aboard vessels. Designed for seamless and reliable integration, this adapter functions as a 4-way splitter, allowing multiple devices to connect to the same NMEA2000 bus segment.\n\u003c\/p\u003e\n\u003ch3\u003eNMEA2000 Connectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    With its MICRO5C MFFFFF connector configuration (one male and five female), this adapter facilitates the interconnection of various certified NMEA2000 marine electronic devices. It ensures stable data transmission compliant with standards, essential for sensors, multifunction displays, and other network peripherals. NMEA2000 certification guarantees compatibility and performance within existing or new network architectures.\n\u003c\/p\u003e\n\u003ch3\u003e4-Way Splitter Function\u003c\/h3\u003e\n\u003cp\u003e\n    The 4-way splitter function of the \u003cstrong\u003eFURUNO OD-NAW-MM1MF1MF4001 adapter\u003c\/strong\u003e provides a solution for organizing connections within the NMEA2000 network. It allows grouping and distributing NMEA2000 signals to four separate devices while maintaining the integrity of the main bus. This type of adapter is a structural element for installations requiring multiple connection points nearby, simplifying wiring and system maintenance.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56090855342420,"sku":"OD-NAW-MM1MF1MF4001","price":59.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-adaptateur-nmea2000-micro5c-mfffff-certifie_od-naw-mm1mf1mf4001-1.png?v=1781266044"},{"product_id":"furuno-rd33-repetiteur-donnees-marine-organiseur-ecran-lcd","title":"RD33 — Organizer, 4.3\" high-resolution color LCD data repeater — 700cd\/m² readability","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO RD33\u003c\/strong\u003e is a marine data repeater and organizer featuring a 4.3-inch color LCD screen. Designed to display essential navigation data with optimized readability, it includes a brightness of 700 cd\/m² and a resolution of 480 x 272 pixels (WQVGA), ensuring clear visibility even in bright sunlight. This versatile device allows you to organize and view data from various onboard equipment such as GPS, chartplotter, radar, fishfinder, autopilot, instruments, and engine information.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO RD33\u003c\/strong\u003e offers extensive connectivity via NMEA 0183, NMEA 2000, and CAN bus interfaces. It includes two NMEA 2000 ports for input and output, supporting daisy-chaining, and one NMEA 0183 port for input and output. Its internal conversion capability between NMEA 0183 and CAN bus formats facilitates integration into existing marine networks, enabling seamless communication between devices. The RD33 is compatible with Furuno’s NavNet 3D and TZtouch systems, providing smooth integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eDisplay and Advanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    This repeater offers customizable display options, ranging from full-screen to a six-panel split view, allowing users to prioritize information as needed. It includes various display modes such as Speedometer, Highway, Text, Graph, Alphanumeric, Numeric, and Analog. Up to seven custom display configurations can be saved in memory for quick access. The RD33 also provides simultaneous monitoring of alarms for a wide range of data, including water temperature, depth, speed, arrival, anchor watch, cross-track error (XTE), course, odometer, timers, roll and pitch, wind speed and direction, and battery status.\n\u003c\/p\u003e\n\n\u003ch3\u003eDurability and Technical Specifications\u003c\/h3\u003e\n\u003cp\u003e\n    With IP56 protection, the \u003cstrong\u003eFURUNO RD33\u003c\/strong\u003e is built to withstand marine environments, offering resistance to dust and high-pressure water jets. It operates on 12–24 VDC with power consumption of 0.2–0.1 A (0.26 A on CAN bus at 15 VDC). It supports ambient temperatures from -15°C to +55°C and relative humidity of 93% at 40°C. Its dimensions are approximately 17.3 cm x 14.5 cm x 7.4 cm. Weight ranges from 0.7 kg for bracket mounting to 0.59 kg for flush mounting.","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56097872806228,"sku":"IMD02361001","price":546.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-rd33-organiseur-repetiteur-de-donnees-43-lcd-couleur-haute-resolution-700cdm2-lisibilite_imd0-1.jpg?v=1781304672"},{"product_id":"furuno-fi70pk1-pack-instrument-multifonction-vitesse-profondeur-vent-nmea2000","title":"FI70PK1 — FURUNO FI70 Multifunction Instrument Pack Speed\/Depth\/Wind","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO FI70PK1\u003c\/strong\u003e multifunction instrument pack is a complete navigation solution designed for sailboats and powerboats. It includes a 4.1-inch color LCD screen, a wind sensor, and a through-hull multifunction transducer for depth, speed, and temperature. The system is interconnected via an NMEA2000 network for simplified data integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eDisplay and visibility\u003c\/h3\u003e\n\u003cp\u003e\n    The FI70’s 4.1-inch color screen has a QVGA resolution of 320 x 240 pixels. Its bonded technology eliminates internal condensation and improves contrast, ensuring readability in full sunlight with a typical brightness of 700 cd\/m². Day and Night modes adjust screen lighting to ambient conditions, minimizing nighttime glare.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    NMEA2000 (CAN bus) connectivity simplifies integration of the FI70PK1 with other marine electronic equipment. The display unit is powered at 15 VDC via the CAN bus, with a maximum consumption of 0.15 A (LEN3) or 0.25 A. The FI70 housing has an IPx6 waterproof rating, protecting it against high-pressure water jets. It operates in a temperature range from -15°C to +55°C. Dimensions are 115 (H) x 115 (L) x 32 (D) mm, with a weight of 0.29 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eExtended pack features\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFI70PK1\u003c\/strong\u003e pack displays a wide range of data, including speed (STW, SOG, VMG), wind (AWS, TWS, AWA, TWA, Beaufort scale, GWD), heading (HDG, ROT, COG), navigation (Bearing, Distance, Waypoint, XTE, Position, ETA, Trip, Odometer), boat data (rudder angle, flaps, heel\/trim), engine information, tank levels, depth, AIS targets (if an AIS is connected to the NMEA2000 network), voltage, and environmental data. The included DST810 transducer allows wireless connection to the Airmar CAST app for easy speed calibration.\n\u003c\/p\u003e\n\n\u003ch3\u003ePack components\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO FI70PK1\u003c\/strong\u003e pack includes:\n    \u003c\/p\u003e\u003cul\u003e\n        \u003cli\u003eFI70 4.1\" NMEA2000 multifunction display with 6m cable.\u003c\/li\u003e\n        \u003cli\u003eFI-5001 wind vane anemometer with 372mm arm (cable not included).\u003c\/li\u003e\n        \u003cli\u003eFI-5002 NMEA2000 12VDC 8-port junction box.\u003c\/li\u003e\n        \u003cli\u003eDST810 NMEA2000 plastic through-hull multifunction active transducer (Depth, Speed, Temperature, and Boat Attitude) 235 kHz, with Micro-C NMEA2000 connector, Bluetooth, and 6m cable.\u003c\/li\u003e\n        \u003cli\u003eFI-5002 analog-to-NMEA2000 converter junction box.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    The FI70 is compatible with Furuno NavNet TZtouch\/TZtouch2 and NAVpilot-711C series.","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56097930281300,"sku":"IMD03413001PK1","price":1521.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-fi70pk1-pack-instrument-multifonction-fi70-vitesseprofondeurvent_imd03413001pk1-1.jpg?v=1781304867"},{"product_id":"b-g-triton-edge-sailing-processor-processeur-navigation-marine","title":"B\u0026G Triton Edge sailing processor base pack","description":"\u003cp\u003e\n    Designed for cruising and racing\/cruising sailboats, the \u003cstrong\u003eB\u0026G Triton Edge Sailing Processor Base pack\u003c\/strong\u003e (SKU: 000-11548-002) is a centralized instrument processor that provides advanced navigation data processing. It integrates a microprocessor for essential instrument calculations, improving the accuracy of navigation information and autopilot performance.\n\u003c\/p\u003e\n\u003ch3\u003eConnectivity and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The Triton Edge features a 100 Mbit Ethernet port, an NMEA 2000® Micro-C port (1 LEN), and PC connectivity via an integrated web server. It includes an internal dual-band Wi-Fi® (802.11 b\/g\/n) with an integrated antenna, operating at 2.4 GHz. These connectivity options ensure robust integration with external sensors and system modules.\n\u003c\/p\u003e\n\u003ch3\u003eNavigation Data and Advanced Functions\u003c\/h3\u003e\n\u003cp\u003e\n    This processor delivers a comprehensive suite of navigation data, including advanced calculations for starting line, true wind data with auto-calibration, boat speed calibration and correction, and wind correction based on heel and trim angles. It supports polar tables to optimize navigation performance. Integration with the B\u0026G Companion app allows data logging and review, with the ability to upload tracks to the cloud. The integrated web server simplifies setup, commissioning, and advanced diagnostics, while offering backup, restore, and data export functions.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The Triton Edge operates on a 12\/24 V DC power supply (9.0–31.2 V DC) with a maximum power consumption of 4 W and a recommended fuse rating of 1 A. Its IPX6 and IPX7 waterproof rating ensures resistance to marine environments. It operates within a temperature range of -15 °C to 55 °C and can be stored from -40 °C to 85 °C. Its dimensions are approximately 6\" (L) x 3.9\" (H) x 2.1\" (D) with a weight of 0.26 kg. The processor is compatible with B\u0026G Triton™ 2 and Nemesis™ displays, as well as Vulcan™ and Zeus™ chartplotters. It is CE and UKCA certified and compliant with IEC\/EN 60945 and AS\/NZS 2772.2 2016 standards.\n\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":56126603264340,"sku":"000-11548-002","price":1704.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/family-000-12365-001-000-11548-002-1.jpg?v=1781618830"},{"product_id":"b-g-hercules-wtp-processeur-navigation-voile","title":"B\u0026G Hercules WTP sailing navigation processor","description":"\u003cp\u003e\n    Designed for high-performance yachts and Grand Prix racing, the \u003cstrong\u003eB\u0026G Hercules WTP Sailing Processor\u003c\/strong\u003e serves as the central hub for advanced navigation systems. It features a next-generation quad-core microprocessor for ultra-fast data processing and offers extensive integration options, delivering accurate navigation information.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This processor provides full connectivity to adapt to various marine equipment. It includes a NMEA2000® compatible Micro-C interface and two 100 Mbps Ethernet ports for a robust network. The integration of 9 analog 12-bit channels, 2 NMEA 0183® serial I\/O channels, 3 pulse inputs, and 2 configurable alarm outputs allows connection to a wide range of sensors and displays. It also includes a man-overboard input and ModBus support for third-party system integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Features and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eB\u0026G Hercules WTP Sailing Processor\u003c\/strong\u003e enables advanced calculations and calibrations for true wind, motion and heel correction, and optimized boat speed calibration. It supports advanced polars tables and target performance data. The processor also integrates a starting line calculation function for racing. Navigation data can be logged to a Micro SD card (up to 512 GB) or to a B\u0026G cloud account, managed via an intuitive web interface or the B\u0026G Companion app. A built-in barometric pressure sensor is included.\n\u003c\/p\u003e\n\n\u003ch3\u003eDurability and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With IPx6 and IPx7 ratings, the B\u0026G Hercules WTP processor is designed to withstand marine environments. It operates in a temperature range from –15°C to 55°C and supports a 12\/24 V DC power supply (9.0–31.2 V DC), with a maximum consumption of 19 W. Its weight is 0.70 kg. Installation is simplified by a guided integration system and automated calibration of primary sensors.\n\u003c\/p\u003e","brand":"B\u0026G","offers":[{"title":"Default Title","offer_id":56132818239828,"sku":"000-15136-001","price":6737.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/bandg-hercules-wtp-sailing-processor_000-15136-001-01.webp?v=1781620553"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/collections\/centrale-de-navigation.png?v=1774455766","url":"https:\/\/skysat.fr\/en\/collections\/navigation-central.oembed","provider":"Skysat","version":"1.0","type":"link"}