{"title":"Pilot sensors","description":"\u003cp\u003eSensors and antennas dedicated to autopilots, including rudder angle, inertial measurement unit, GPS data, and high-frequency acquisition.\u003c\/p\u003e","products":[{"product_id":"navico-rf25n-capteur-angle-barre-nmea2000-cable-5-5m","title":"RF25N rudder angle sensor - NMEA 2000 - 5.5 m cable","description":"\u003cp\u003eThe Navico RF25N rudder angle sensor is an essential component for optimizing the performance of Simrad and B\u0026G autopilots. Designed to provide absolutely reliable rudder position data, it allows the autopilot computer to adjust its actions with maximum responsiveness. Unlike competing solutions such as the Garmin GRF 10, this model integrates natively into the Navico ecosystem via a direct NMEA 2000 connection, reducing processing latency and actuator power consumption.\u003c\/p\u003e\n\u003ch3\u003eSurgical Precision and Repeatability\u003c\/h3\u003e\n\u003cp\u003eThe RF25N stands out with formidable accuracy of ±0.25° (within a range of ±5°) and exceptional repeatability of ±0.1°. Capable of measuring a rudder angle up to ±120 degrees, it transmits this data via the NMEA 2000 signal (PGN 127245). This high fidelity of information is crucial for advanced steering algorithms, ensuring very smooth course holding and minimizing unnecessary rudder movements.\u003c\/p\u003e\n\u003ch3\u003eNMEA 2000 Installation and Marine Robustness\u003c\/h3\u003e\n\u003cp\u003eInstallation is greatly simplified thanks to the included 5.5-meter cable, which provides both power (8-16V) and data transmission over the network. With an ultra-low consumption of 0.4W (LEN 1), this sensor preserves the vessel's energy balance. Made from Arnite T06 200 PBT thermoplastic and benefiting from IP56 waterproofing, the RF25N is built to withstand damp locker environments, tolerating temperatures ranging from -25 to +55 °C. It can be mounted horizontally or vertically depending on your rudder stock configuration.\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":53723746632020,"sku":"000-10756-001","price":261.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_a1c457c1-8aef-4799-ac98-13e6330afb44.jpg?v=1772639604"},{"product_id":"madintec-antenne-gps-triple-bandes-mad-sensor-xd","title":"Triple-band GPS antenna for connection to the MAD Sensor XD, supplied without cable or connector","description":"\u003cp\u003e\n    The MADINTEC triple-band GPS antenna is an essential component designed to integrate specifically with the MAD Sensor XD, the core of the MADBrain autopilot system. This advanced antenna ensures high-precision positioning data acquisition, critical for the artificial intelligence algorithms powering the MADBrain Autopilot.\n\u003c\/p\u003e\n\u003ch3\u003ePrecision and Integration in the MADINTEC Ecosystem\u003c\/h3\u003e\n\u003cp\u003e\n    Unlike generic GPS sensors such as the B\u0026G ZG100 or the Garmin 24XD—which the MADBrain system can also use via NMEA 2000—this MADINTEC antenna is optimized for direct connection to the MAD Sensor XD. This synergy ensures high-resolution data transmission, crucial for ultra-fine true wind calculation and advanced boat attitude analysis, functions derived from offshore racing and the America’s Cup. It directly enhances the MADBrain’s ability to anticipate trajectories and deliver unparalleled course stability.\n\u003c\/p\u003e\n\u003ch3\u003eTriple-Band Technology for Enhanced Reliability\u003c\/h3\u003e\n\u003cp\u003e\n    The triple-band technology of this MADINTEC GPS antenna significantly improves positioning accuracy and reliability by receiving signals from multiple satellite constellations simultaneously. This feature is essential for high-performance autopilot systems, where every tenth of a degree of helm movement matters, particularly in demanding conditions encountered in offshore racing or bluewater sailing. Integrating this antenna strengthens the MADBrain’s ability to maintain smooth and precise course-keeping while minimizing actuator actions and energy consumption.\n\u003c\/p\u003e","brand":"Madintec","offers":[{"title":"Default Title","offer_id":53723861483860,"sku":"MIT-HW-MXDA","price":450.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero.webp?v=1778235518"},{"product_id":"madintec-mad-sensor-capteur-angle-barre-90-degres","title":"Mad Sensor, 90° bar angle sensor, single output","description":"\u003cp\u003e\n    The \u003cstrong\u003eMADINTEC Mad Sensor\u003c\/strong\u003e is a high-precision rudder angle sensor, designed as a fundamental component of the MADBrain autopilot system. This active sensor with a single output stands out for its ability to measure a rudder angle of 90° with a voltage range of 0.5 to 4.5 V, offering a resolution of 22.5° per volt. This technical specification exceeds that of standard sensors on the market, which often operate over a 0 to 5 V range for 360°, i.e., 72° per volt, highlighting the fine measurement capability of the Mad Sensor.\n\u003c\/p\u003e\n\u003ch3\u003eAccuracy and Integration with the MADBrain System\u003c\/h3\u003e\n\u003cp\u003e\n    The performance of the \u003cstrong\u003eMad Sensor\u003c\/strong\u003e is critical to the intelligence of the MADBrain system. Its high-precision measurement enables the MADBrain navigation processor to acquire ultra-fine rudder data, essential for its artificial intelligence algorithms. This integration ensures smooth and rigorous course-keeping, even in unstable conditions, and instant responsiveness to variations. The sensor’s design, characterized by low power consumption and reinforced waterproofing, guarantees operational reliability in demanding marine environments. Unlike generic solutions, the Mad Sensor is optimized for the requirements of high-performance steering systems, as evidenced by MADINTEC’s victories in offshore racing.\n\u003c\/p\u003e\n\u003ch3\u003eTechnical and Strategic Advantages\u003c\/h3\u003e\n\u003cp\u003e\n    By providing such accurate rudder angle data, the \u003cstrong\u003eMADINTEC Mad Sensor\u003c\/strong\u003e directly contributes to reducing actuator load and optimizing the autopilot’s energy consumption. It enables the MADBrain system to make subtle and precise corrections, avoiding overreactions and delivering smoother, more stable navigation. While brands like B\u0026G, Garmin, or Raymarine offer their own rudder angle sensors for their autopilot systems, the MADINTEC Mad Sensor positions itself in the high-performance segment, leveraging expertise developed in offshore racing to provide an exceptionally accurate measurement solution now accessible to a wide range of sailboats, from cruising catamarans to superyachts.\n\u003c\/p\u003e","brand":"Madintec","offers":[{"title":"Default Title","offer_id":53723865350484,"sku":"MIT-HW-MSRAS","price":495.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero_283faf3d-b4f4-4388-97eb-57f101aa620a.png?v=1778235502"},{"product_id":"madintec-mad-sensor-motion-centrale-attitude","title":"MAD Sensor Motion, attitude center","description":"\u003cp\u003e\n    The \u003cstrong\u003eMAD Sensor Motion\u003c\/strong\u003e from MADINTEC is an advanced inertial measurement unit (IMU), a core component of the MADBrain autopilot system. Designed for high-resolution data acquisition, it integrates 3 gyroscopes and 3 accelerometers for intelligent, high-frequency processing of boat movements. This capability enables precise attitude analysis and contributes to ultra-fine calculations of true wind, functions directly derived from MADINTEC’s America’s Cup and Vendée Globe experience.\n\u003c\/p\u003e\n\n\u003ch3\u003ePrecision and Integration at the Heart of the MADBrain Autopilot\u003c\/h3\u003e\n\u003cp\u003e\n    As an essential proprietary module, the MAD Sensor Motion feeds critical motion data to the MADBrain processor. The MADBrain system stands out for its artificial intelligence approach to steering, offering active adaptation to wind and boat dynamics with high-frequency data acquisition up to 50 Hz. Unlike conventional autopilots that react, the MADBrain—thanks to the MAD Sensor Motion—anticipates trajectories, ensuring unmatched course stability and responsiveness, even in the most extreme conditions. This technology is adopted by top skippers in IMOCA, Ocean Fifty, Ultim, Class40, and Mini 6.50 classes, and is now accessible for cruising catamarans, IRC monohulls, and superyachts.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance and Modularity\u003c\/h3\u003e\n\u003cp\u003e\n    The MAD Sensor Motion’s position within the MADBrain ecosystem makes it a high-performance alternative to traditional attitude sensors found in competing systems such as B\u0026G H5000 processors or Raymarine EV-1 sensor units. Its ability to provide data for exclusive software packs like the optional Heel Security and Elite Performance packages highlights its strategic role in optimizing both safety and maximum speed. Manufactured in France, it natively integrates via the MADINTEC CAN bus, NMEA 2000-compatible, ensuring a plug-and-play installation with B\u0026G, Garmin, and Raymarine displays and sensors.","brand":"Madintec","offers":[{"title":"Default Title","offer_id":53723865579860,"sku":"MIT-HW-MSM","price":850.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01-hero_32a2daed-263a-48f5-9554-d80fb20c72b2.png?v=1778235485"},{"product_id":"garmin-module-shadow-drive-pilote-automatique","title":"Shadow Drive Module","description":"\u003cp\u003e\n    The Garmin Shadow Drive module (part number 010-11054-00) is an accessory designed for Garmin marine autopilot systems. It enhances vessel control by enabling a smooth transition between autopilot and manual steering. Unlike a full autopilot system such as the GHP 20 or a multifunction chartplotter like a GPSMAP, the Shadow Drive is a supplementary unit that enriches the safety and maneuverability features of an existing autopilot system.\n\u003c\/p\u003e\n\u003ch3\u003ePrimary function and integration\u003c\/h3\u003e\n\u003cp\u003e\n    The Shadow Drive’s primary function is to automatically disengage the autopilot as soon as the helm is turned manually. This allows the helmsman to regain immediate control of the vessel without having to manually disable the system. Once the helm is released and the boat maintains a steady course, the module automatically re-engages the autopilot, ensuring continuous assisted navigation. This capability is critical for rapid maneuvers or situations requiring immediate human intervention, providing an additional layer of safety. It differs from standard rudder position sensors, which only inform the autopilot of the rudder’s position, by directly controlling the system’s engagement.\n\u003c\/p\u003e\n\u003ch3\u003eCompatibility and technical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This module is compatible with several Garmin marine autopilot systems, including the GHP™ 10, GHP™ 12, GHP™ 20 for hydraulic steering, and GHP™ 20 Marine with SmartPump. It features 1\/4\" female NPT fittings for integration into hydraulic steering systems. Its manufacturer part number is 010-11054-00. The Shadow Drive is not a sonar system like the LiveScope™ Plus LVS34 Transducer; it is a component of the steering and autopilot system, focusing on the interaction between the autopilot and manual steering.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":56008749089108,"sku":"010-11054-00","price":345.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/01_597d7325-be34-477b-aeb7-16638917a27f.jpg?v=1780434644"},{"product_id":"simrad-lfi3000mk2-linear-feedback-interface-nmea2000","title":"Simrad LFI3000MK2 Linear Feedback Interface","description":"\u003cp\u003e\n    Designed to modernize existing navigation systems, the \u003cstrong\u003eSimrad LFI3000MK2 Linear Feedback Interface\u003c\/strong\u003e converts analog rudder position data into an NMEA 2000 format. This interface is a solution for refit projects, allowing the retention of existing analog rudder feedback units, such as the Simrad LF3000, when upgrading to a contemporary NMEA 2000 autopilot system like the Simrad NAC series.\n\u003c\/p\u003e\n\n\u003ch3\u003eNMEA 2000 Conversion and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSimrad LFI3000MK2\u003c\/strong\u003e is an active interface that takes an analog electrical signal from a linear feedback unit and converts it into NMEA 2000 data. This functionality ensures that rudder angle information is broadcast across the NMEA 2000 network, making it visible on connected multifunction displays (MFD) and autopilots. The system is compatible with Simrad autopilot computers, including the NAC series, and offers immediate recognition for simplified installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    Powered via the NMEA 2000 bus, the \u003cstrong\u003eLFI3000MK2\u003c\/strong\u003e interface has a power consumption of 0.9 watts. It is protected against the marine environment with an IP56 rating and is constructed in black ABS for durability. Its weight is 0.7 kg, including cable. It operates within a temperature range of 0 to +70°C and can be stored from -30 to +80°C. Installation can be performed on the deck or a bulkhead. The output signal features a polarity-independent variable frequency with a resolution of 3400Hz at center, ±10Hz\/degree, equivalent to a 1.7 mm travel. Linearity is ±3 degrees up to 45 degrees of rudder angle. The device is supplied with a 1.5 m shielded TP cable. Rudder feedback calibration is automatically set during the autopilot configuration process.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56047703261524,"sku":"20188082","price":141.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/simrad-lfi3000mk2-linear-feedback-interface_20188082-01.jpg?v=1780872966"},{"product_id":"navico-cable-rudder-feedback-pilote-automatique-nac1-nac2","title":"NAC-1 \u0026 NAC-2 Rudder Feedback Cable","description":"\u003cp\u003e\n    The \u003cstrong\u003eNAC-1 \u0026 NAC-2 rudder sensor cable\u003c\/strong\u003e (part number 000-14798-001) from Navico is a critical component designed to link resistive rudder sensor units to Navico’s NAC-1 and NAC-2 autopilot computers. This 2-meter (6.5 ft) cable ensures reliable communication, essential for accurate steering in autopilot systems.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The cable features a 3-pin connector at one end for connection to the autopilot computer, and three stripped wires at the other end for direct connection to the resistive rudder sensor unit. The wires are color-coded: red for +5V DC power, yellow for signal, and black for -0V DC ground, simplifying compliant installation.\n\u003c\/p\u003e\n\n\u003ch3\u003eApplications and Benefits\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNAC-1 \u0026 NAC-2 rudder sensor cable\u003c\/strong\u003e is an OEM component that ensures compatibility and performance within Navico systems. It is particularly suited for installations requiring a physical rudder sensor to provide precise feedback on rudder position. Its design streamlines the installation process for quick and efficient integration.\n\u003c\/p\u003e","brand":"Navico","offers":[{"title":"Default Title","offer_id":56048923279700,"sku":"000-14798-001","price":36.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/lowrance-nac-1-nac-2-rudder-feedback-cable_000-14798-001-01.png?v=1780909203"},{"product_id":"simrad-steadysteer-flow-switch-pilote-automatique-hydraulique","title":"SteadySteer Flow Switch","description":"\u003cp\u003e\n    Designed to optimize the sailing experience, the \u003cstrong\u003eSimrad SteadySteer Flow Switch (000-15734-001)\u003c\/strong\u003e is a hydraulic steering component that enhances autopilot systems. It allows manual control of the vessel during turns without disengaging the autopilot, then automatically re-engages once a new heading is established. This feature ensures a smooth transition between manual and automatic steering, reducing distractions and simplifying heading adjustments.\n\u003c\/p\u003e\n\n\u003ch3\u003eKey Features of the SteadySteer Flow Switch\u003c\/h3\u003e\n\u003cp\u003e\n    The SteadySteer device enables automatic disengagement of the autopilot when manually intervening on the helm during a turn. Once the vessel stabilizes on a new heading, the autopilot automatically re-engages without requiring user input. This automation provides a smoother steering experience and intuitive boat control. Manoeuvres are simplified, with no alarms or button presses needed to change heading—simply turn the helm.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSteadySteer Flow Switch\u003c\/strong\u003e is compatible with Simrad autopilot computers NAC-2 and NAC-3 (from software version 1.1.01.00). It also works with control units AP44, IS42, and AP48 (from software version 57.3.163), as well as Simrad multifunction displays running software version 20.2 or later. This system is specifically designed for vessels with hydraulic steering systems and is compatible with RPU-series pumps. It is not compatible with newer \"PUMP-\" Canadian Metal autopilot pumps.\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049906516308,"sku":"000-15734-001","price":393.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/simrad-steadysteer-flow-switch_000-15734-001-01.jpg?v=1780915526"},{"product_id":"simrad-kit-raccordement-pompe-pilote-automatique-orb-steadysteer","title":"ORB pump connection kit for autopilot with SteadySteer","description":"\u003cp\u003e\n    Designed for ORB (O-Ring Boss) steering systems, the \u003cstrong\u003eSimrad autopilot pump connection kit with SteadySteer\u003c\/strong\u003e (part number 000-15949-001) simplifies the integration of the SteadySteer feature. This kit aims to reduce issues related to field-terminated hydraulic hose connections and incorrect installation layouts, ensuring reliable autopilot implementation.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    This kit is specifically designed for ORB steering systems and is compatible with Simrad MKII 1, 2, 3, 4, and 5 pumps. It facilitates the addition of SteadySteer functionality, which enhances the sailing experience by allowing autopilot control via the tiller and automatic course recovery on straight segments after manual intervention. Installation requires safety glasses, 15 mm (5\/16\") and 16 mm (5\/8\") wrenches, and liquid Teflon® thread sealant for the SteadySteer kit.\n\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eSimrad autopilot pump connection kit with SteadySteer\u003c\/strong\u003e includes pre-assembled hydraulic components for simplified installation:\n    \u003c\/p\u003e\u003cul\u003e\n        \u003cli\u003eTwo black 5\/16\" diameter hoses rated to 1500 PSI, 810 mm (31.9\") long, with 9\/16\"-18 UNF to 9\/16\"-18 UNF fittings.\u003c\/li\u003e\n        \u003cli\u003eTwo black 5\/16\" diameter hoses rated to 1500 PSI, 360 mm (14.2\") long, with 9\/16\"-18 UNF to 9\/16\"-18 UNF fittings.\u003c\/li\u003e\n        \u003cli\u003eTwo T-connectors: ORB-5 to 9\/16\"-18 UNF \u003e 9\/16\"-18 UNF.\u003c\/li\u003e\n        \u003cli\u003eOne 90° elbow connector: ORB-05 to 9\/16\"-18 UNF.\u003c\/li\u003e\n        \u003cli\u003eTwo adapters: ¼\" NPT to 9\/16\"-18 UNF.\u003c\/li\u003e\n        \u003cli\u003eOne SteadySteer flow sensor.\u003c\/li\u003e\n        \u003cli\u003eOne bottle of hydraulic fluid.\u003c\/li\u003e\n        \u003cli\u003eOne filter funnel.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    These components are designed to ensure secure and functional hydraulic connections.","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56049969070420,"sku":"000-15949-001","price":499.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/simrad-autopilot-pump-fitting-kit-for-orb-steering-system-with-steady-steer_000-15949-001-01.jpg?v=1780916136"},{"product_id":"simrad-lf3000-linear-feedback-capteur-angle-barre-moteur-hors-bord","title":"LF3000 Linear Feedback","description":"\u003cp\u003e\n    Designed for boats equipped with outboard motors and hydraulic steering rams, the \u003cstrong\u003eSimrad LF3000 Linear Feedback\u003c\/strong\u003e is a sealed linear position sensor. It provides accurate rudder angle data to autopilot systems, improving heading hold accuracy and navigation.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Specifications and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eLF3000 Linear Feedback\u003c\/strong\u003e offers a 300 mm (11.8 in) stroke and comes with a pre-wired 8.5 m (28 ft) cable. This cable length allows direct connection to the Simrad LFI3000 MK2 interface, which is required for integration with Simrad autopilot computers. Its weight is 1.297 kg.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design and Installation\u003c\/h3\u003e\n\u003cp\u003e\n    With a fully sealed construction, meeting or exceeding IPX7 standards, the \u003cstrong\u003eSimrad LF3000 Linear Feedback\u003c\/strong\u003e is designed to withstand marine environments. It includes a dedicated mounting bracket and clamps that allow direct attachment to the existing outboard motor ram, requiring no major modifications to the steering system. This design simplifies installation and ensures reliable operation even in harsh weather conditions.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56050328731988,"sku":"20188074","price":350.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/web-lf3000-linear-feedback_20188074-01.jpg?v=1780919061"},{"product_id":"simrad-rf300-rudder-feedback-capteur-barre","title":"RF300 Rudder Feedback - Frequency","description":"\u003cp\u003e\n    The \u003cstrong\u003eSimrad RF300 Rudder Feedback\u003c\/strong\u003e is a high-resolution rudder angle sensor designed for autopilot systems on boats equipped with inboard engines. It provides precise data on the rudder position, essential for smooth and accurate autopilot operation.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor uses a variable frequency output for direct connection to autopilot computers via a two-wire interface. Its center frequency is 3400 Hz, with a 20 Hz variation per degree of rudder movement. The unit ships with a 10-meter cable and a transmission link kit to simplify installation. Weighing approximately 0.5 kg, the RF300 is a rugged unit designed to withstand harsh marine environments.\n\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility and compliance\u003c\/h3\u003e\n\u003cp\u003e\n    The Simrad RF300 is compatible with various Simrad autopilot computers, including models AC70, AD80, SD80, NAC-3, and H5000. It is primarily used on inboard-powered boats requiring rudder angle display on the autopilot. This product has been tested and declared compliant with the requirements of IEC 60945:2002 for maritime navigation and radiocommunication equipment systems, as well as the Australian Radiocommunications (Electromagnetic Compatibility) Standard 2008 (Level 2).\n\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":56050333221204,"sku":"20193744","price":257.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/simrad-rf300-rudder-feedback-frequency_20193744-01.png?v=1780919091"},{"product_id":"furuno-fap-6112-capteur-barre-rotatif-aluminium-navpilot","title":"FAP-6112 Feed Back Pro rotary sensor in aluminum with 20m cable for NavPilot Series 700\/300 (F","description":"\u003cp\u003e\n    The \u003cb\u003eFURUNO FAP-6112\u003c\/b\u003e is a rotary rudder sensor, also called a Rudder Reference Unit (RRU), designed to provide precise information on the rudder position to Furuno NavPilot Series 700 and 300 autopilot systems. Made of aluminum and featuring a 20-meter cable, this component ensures accurate monitoring of the rudder's physical movement, converting this data into digital signals usable by the autopilot.\n\u003c\/p\u003e\n\u003ch3\u003ePrecision and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This sensor is a key element for precise course control, allowing the NavPilot system to effectively compensate for leeway, sea state, and wind variations. Its aluminum construction and design aim for extended service life in the marine environment. The FAP-6112 integrates with NavPilot systems, which use a self-learning and adaptive software algorithm. This algorithm dynamically adjusts parameters such as vessel speed, trim, draft, tidal and wind effects for optimized course keeping.\n\u003c\/p\u003e\n\u003ch3\u003eExtended Features with NavPilot\u003c\/h3\u003e\n\u003cp\u003e\n    When the FAP-6112 is used with a compatible NavPilot system, functions such as \"SAFE HELM\" allow temporary manual control of the rudder, while \"POWER ASSIST\" provides tiller-steered power assistance. It should be noted that for some outboard installations using the latest NAVpilot-700 and NavPilot 300 series, Furuno’s \"Fantum Feedback\" technology may enable precise course control without requiring a physical rudder feedback unit. However, the FAP-6112 remains a relevant option for providing rudder position data and complementing these systems.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56084173193556,"sku":"00003767800","price":482.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-fap-6112-feed-back-pro-rotatif-en-aluminium-et-20m-de-cable-pour-navpilot-serie-700300-f_0000-1.png?v=1781193797"},{"product_id":"furuno-navpilot300-pilote-automatique-nmea2000","title":"NAVPILOT300 — Autopilot NMEA2000 - FAP-3011 (Display 4.1\") + FAP-3012 (Computer) + GC-001","description":"\u003cp\u003e\n    Designed for 24 to 50-foot outboard motor vessels, the \u003cstrong\u003eFURUNO NAVPILOT300\u003c\/strong\u003e autopilot is an advanced NMEA2000 system compatible with one to four engines. It consists of the 4.1-inch color display FAP-3011, the FAP-3012 computer, and the GC-001 wireless gesture control.\n\u003c\/p\u003e\n\u003ch3\u003eAdvanced Piloting Technology\u003c\/h3\u003e\n\u003cp\u003e\n    Its adaptive software features a self-learning algorithm to continuously optimize steering. The Fantum Feedback™ technology eliminates the need for a physical rudder sensor in outboard installations, simplifying setup while ensuring precise heading control at various speeds. The GC-001 gesture control enables intuitive remote operation via Bluetooth Low Energy (BLE) over a 10-meter range. The NAVPILOT300 does not include a Wind mode.\n\u003c\/p\u003e\n\u003ch3\u003eSpecific Navigation and Fishing Modes\u003c\/h3\u003e\n\u003cp\u003e\n    The system offers multiple navigation and fishing modes, including Auto and Advanced Auto with tide and wind compensation. The Sabiki™ mode is tailored for trolling, allowing the autopilot to hold a heading against wind and current at speeds under 5 knots on outboard vessels. The Fish Hunter™ mode includes preprogrammed maneuvers (Zig-Zag, Orbit, Figure 8, Spiral) around a specified target, also usable for man-overboard (MOB) situations. Highway mode and route\/track following (Nav) are also available.\n\u003c\/p\u003e\n\u003ch3\u003eIntegration and Compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    NMEA2000-certified, the FAP-3011 display and FAP-3012 processor connect directly to the vessel’s NMEA2000 backbone. The FAP-3011 display features a 4.1-inch (320 x 240 pixels) TFT LCD color screen with 700 cd\/m² brightness and IP56 protection. The FAP-3012 processor runs on 12–24 VDC, draws 10A continuous and 20A peak for 5 seconds, and has IP55 protection. The GC-001 control is IP67 waterproof. The NAVPILOT300 can be fully controlled from Furuno multifunction displays NavNet TZtouch, TZtouch2, GP1871F, and GP1971F. It also integrates SAFE HELM for temporary manual override and POWER ASSIST for steering assistance. The system is compatible with Yamaha Helm Master™ and Yanmar 8LV engine systems, as well as Joystick Seastar Optimus360 systems (optional gateways may be required). It is not compatible with Volvo Penta IPS when Volvo Marine Leisure is active.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089297224020,"sku":"IMD03230003","price":1749.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-navpilot300-pilote-automatique-nmea2000-fap-3011-indicateur-41-fap-3012-calculateur-gc-001_im-1.gif?v=1781255588"},{"product_id":"furuno-navpilot711cpk1-pilote-automatique-can-bus","title":"NAVPILOT711CPK1 — Autopilot CAN Bus, 4.1\", Display, Processor Unit, Rotary Feedback","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO NAVPILOT711CPK1\u003c\/strong\u003e is a CAN Bus-based autopilot system designed to provide precise and adaptable navigation. It integrates advanced technologies to optimize course-keeping across various vessel types.\n\u003c\/p\u003e\n\n\u003ch3\u003eDisplay and Control Unit\u003c\/h3\u003e\n\u003cp\u003e\n    The FAP-7011C control unit features a 4.1\" TFT LCD color display with a resolution of 320x240 pixels. Its 700 cd\/m² brightness ensures visibility in full sunlight, while the 8-level adjustable backlight preserves night vision. The control unit is rated IP56 and operates on 12-24 VDC.\n\u003c\/p\u003e\n\n\u003ch3\u003eProcessor Unit and Performance\u003c\/h3\u003e\n\u003cp\u003e\n    The system’s core is the FAP-7002 processor unit. It manages multiple steering modes, including STBY, Auto, Dodge, Turn, Remote, Advanced auto, Navigation, Wind, and Fish Hunter™ (the latter require external data). The processor supports a continuous current of 25A and a peak current of 50A for 5 seconds for the rudder motor\/solenoid, with a 3A clutch\/bypass drive. Adjustable parameters include rudder gain (AUTO\/1-20), counter-rudder (AUTO\/0-20), trim gain (AUTO\/1-20), and rate of turn (1-30 deg\/s). The processor unit is rated IPX0.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and Connectivity\u003c\/h3\u003e\n\u003cp\u003e\n    The NAVPILOT711CPK1 features self-learning software that continuously adapts to the vessel’s steering characteristics, adjusting parameters based on speed, trim, draft, tide, and wind. Fantum Feedback™ technology enables precise course control without requiring a physical rudder feedback unit, simplifying installation, particularly for 24- to 50-foot outboard boats.\n    Dedicated modes are included for specific applications: SABIKI™ mode maintains course at low speed in reverse for fishing, while FishHunter™ mode enables automatic maneuvers (zigzag, square, circle, orbit, spiral, figure-eight) around a target when connected to a Furuno sonar or radar.\n    The system provides 2 NMEA0183 ports and 1 CAN Bus port (NMEA2000) for plug-and-play integration with other navigation equipment, such as NavNet TZtouch MFDs and FI-70 instruments. It is compatible with propulsion systems like Yamaha Helm Master™, Yanmar 8LV, and Seastar Optimus360.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089299812692,"sku":"IMD034240AB","price":2332.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-navpilot711cpk1-pilote-can-bus-41-indicateur-calculateur-feed-back-rotatif_imd034240ab-1.jpg?v=1781255605"},{"product_id":"furuno-capteur-a-cable-vmh-ex225-hp-3500-pro-montage-babord","title":"Cable sensor (VMH EX225 HP\/3500 PRO) - Port-side mounting","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO VMH EX225 HP\/3500 PRO cable sensor\u003c\/strong\u003e is designed for demanding marine applications, providing data collection via a wired connection. This model is specifically configured for port-side mounting, allowing targeted integration on the port side of the vessel.\n\u003c\/p\u003e\n\u003ch3\u003eRobust Design for Marine Environment\u003c\/h3\u003e\n\u003cp\u003e\n    With an \u003cstrong\u003eIP66\u003c\/strong\u003e rating, the \u003cstrong\u003eFURUNO VMH EX225 HP\/3500 PRO cable sensor\u003c\/strong\u003e is protected against heavy water spray and dust. This classification ensures its operation in harsh maritime conditions, guaranteeing operational reliability even when exposed to the elements.\n\u003c\/p\u003e\n\u003cp\u003e\n    Technical documentation mentions cable lengths associated with accessories such as the Feed Back Pro rotary (20m) and the additional control panel (10m). This information pertains to peripheral components to the sensor itself, highlighting its role as a sensing element within a broader navigation architecture.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089304105300,"sku":"LE-2204113","price":1037.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-capteur-a-cable-vmh-ex225-hp3500-pro-montage-babord_le-2204113-1.jpg?v=1781255641"},{"product_id":"furuno-pg500-compas-minigyro-capteur-de-cap-nmea0183-ad10","title":"PG500 — 2-Axis Minigyro Compass 12-24VDC • True North • AD10 Output \u0026 2 NMEA0183 Outputs","description":"\u003cp\u003e\n    The \u003cstrong\u003eFURUNO PG500\u003c\/strong\u003e is a 2-axis minigyro compass designed to provide accurate and stable heading data for recreational vessels and coastal fishing boats. It combines innovative electromagnetic compass technology with a solid-state gyroscope for enhanced heading stability. This heading sensor delivers horizontal accuracy of ±1.0° with 0.1° resolution and a tracking rate of 25°\/s.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and Integration\u003c\/h3\u003e\n\u003cp\u003e\n    The PG500 features a versatile interface with one NMEA 0183 input port (Ver1.5\/2.0) for RMC and VTG sentences. It provides two output ports (one managing three outputs) supporting the proprietary FURUNO AD-10 format and NMEA 0183 (Ver2.0) with HDG, HDT, and HDM sentences. A high-speed heading data output in IEC 61162-2 format is also available. AD-10 data updates every 25 ms, while NMEA 0183 data can be selected at 100 ms, 200 ms, or 1 second intervals.\n\u003c\/p\u003e\n\n\u003ch3\u003eAdvanced Features\u003c\/h3\u003e\n\u003cp\u003e\n    This compensated heading sensor integrates a solid-state gyroscope to improve accuracy and stability by monitoring the Coriolis force. It outputs both true and magnetic heading. True heading can be obtained via automatic correction of local magnetic variation through an interface with a compatible GPS navigator (transmitting RMC or VTG sentences), or manually with an optional remote display such as the RD-30\/RD-33. The PG500 also handles automatic deviation correction, performed by spinning the vessel to compensate for errors caused by the onboard environment.\n\u003c\/p\u003e\n\n\u003ch3\u003eRobust Design\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFURUNO PG500\u003c\/strong\u003e operates on 12-24 VDC with a power consumption of 120-30 mA (0.12-0.03 A). Its compact and waterproof housing (IPX5 per IEC 60529 and CFR-46 USCG) is designed to withstand ambient temperatures from -15°C to 55°C. It weighs 0.3 kg and includes visual status indicators to simplify installation and maintenance.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56089306792276,"sku":"IMD016650AB","price":749.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-pg500-compas-minigyro-2-axes-12-24vcc-nord-vrai-sortie-ad10-2-sorties-nmea0183_imd016650ab-1.png?v=1781255664"},{"product_id":"furuno-pack-np711c-pilote-automatique-nmea2000","title":"PACK NP711C FAP6112 PG700 — NAVpilot-711C autopilot NMEA2000, 4.1-inch display, processor, rotating feedback unit, and PG700","description":"\u003cp\u003e\n    The \u003cstrong\u003ePACK NP711C FAP6112 PG700\u003c\/strong\u003e from FURUNO is a complete NMEA2000 autopilot system designed for navigation on various vessel types, including inboard and outboard motorboats as well as sailboats. This pack integrates a control unit, a processor, a rotating rudder reference unit, and a heading sensor. It is engineered to optimize course-keeping and navigation performance through its advanced features and network integration.\n\u003c\/p\u003e\n\n\u003ch3\u003eNAVpilot-711C Control Unit\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eNAVpilot-711C (FAP7011C)\u003c\/strong\u003e control unit features a 4.1-inch TFT LCD color display with QVGA resolution of 320 x 240 pixels. Its effective display area measures 82.56 x 61.92 mm, with adjustable backlighting in 8 levels and a typical brightness of 700 cd\/m² for optimal daytime visibility. The unit has an IP56 rating, ensuring resistance to water spray.\n\u003c\/p\u003e\n\n\u003ch3\u003eFAP7002 Processor and PG700 Sensor\u003c\/h3\u003e\n\u003cp\u003e\n    The system’s core, the \u003cstrong\u003eFAP7002\u003c\/strong\u003e processor, offers various steering modes including STBY, Auto, Dodge, Turn, Remote, Advanced auto, Navigation, Wind, and FishHunter™. It also manages rudder gain, counter-rudder, and trim settings with automatic or manual options. The \u003cstrong\u003ePG700\u003c\/strong\u003e heading sensor is a magnetic fluxgate sensor with semiconductor gyroscope, providing heading accuracy of ±1.0° and a resolution of 0.1°. It is IP55 waterproof and interfaces via NMEA 2000 and FURUNO CAN bus. The processor operates on 12-24 VDC and has an IPX0 rating.\n\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and System Integration\u003c\/h3\u003e\n\u003cp\u003e\n    This FURUNO autopilot integrates self-learning software that continuously adapts and optimizes the vessel’s steering characteristics, adjusting parameters based on speed, trim, draft, tide, wind effects, and weather conditions. The NMEA2000 and CAN bus interface ensures \"Plug and Play\" installation and interconnection with other navigation equipment, including NavNet TZtouch3, NavNet TZtouch2, and FI-70 instruments. Specific modes such as SABIKI™ (astern drift for fishing) and FishHunter™ (automatic maneuvers around a target) are included. The FAP6112 rotating aluminum feedback unit, with 20m cable, provides precise rudder reference. The feedback unit has an IP66 rating.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56098032779604,"sku":"IMD034240ABPK3","price":2956.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-pack-np711c-fap6112-pg700-pilote-automatique-nmea2000-41-indicateur-calculateur-feed-back-rot-1.jpg?v=1781305092"},{"product_id":"furuno-fapar4502-capteur-angle-barre-lineaire-hors-bord","title":"FAPAR4502 — FAPAR4502 Linear Outboard Rudder Angle Feed-Back Unit","description":"\u003cp\u003e\n    Designed for precise control of autopilot systems, the \u003cstrong\u003eFURUNO FAPAR4502\u003c\/strong\u003e linear outboard rudder angle reference unit provides essential data for navigation. This sensor measures the rudder angle or outboard leg angle of the boat, transmitting this information to the autopilot computer or rudder angle display screen.\n\u003c\/p\u003e\n\n\u003ch3\u003eIntegration and compatibility\u003c\/h3\u003e\n\u003cp\u003e\n    The \u003cstrong\u003eFAPAR4502\u003c\/strong\u003e is specifically designed to integrate with Furuno NavPilot 500\/OB and NavPilot 511\/OB autopilots. It is also a requirement for using the Fishunter mode on the Furuno 711C outboard autopilot, providing advanced features for fishing.\n\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003e\n    This linear reference unit, also known as the SmartStick Non-contact Rudder Feedback, features a maximum actuator stroke of 8 inches. Weighing approximately 2.10 lbs, it comes with a 20-meter feedback cable. Its design uses high-quality materials for durability suited to the marine environment.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56098043691348,"sku":"RO-00593","price":690.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-fapar4502-fapar4502-feed-back-hord-bord-lineaire_ro-00593-1.jpg?v=1781305115"},{"product_id":"furuno-capteur-cable-vmh-ex225-hp-3500-pro-montage-tribord","title":"Cable sensor (VMH EX225 HP\/3500 PRO) - Starboard mounting","description":"\u003cp\u003e\n    Designed for autopilot systems, the \u003cb\u003eFuruno cable sensor (VMH EX225 HP\/3500 PRO)\u003c\/b\u003e ensures smooth integration and reliable data. This cable sensor is designed for autopilots and is compatible with VHM EX 225 HP and VHM EX 3500 HP cylinders. It is intended for starboard mounting and provides rudder angle indicator functionality.\n\u003c\/p\u003e\n\n\u003ch3\u003eAccuracy and integration\u003c\/h3\u003e\n\u003cp\u003e\n    Made of anodized aluminum and stainless steel, this sensor is waterproof and comes with 3 meters of electrical cable. It ensures precise and secure navigation when paired with an autopilot.\n\u003c\/p\u003e\n\n\u003ch3\u003eConnectivity and robustness\u003c\/h3\u003e\n\u003cp\u003e\n    This cable sensor is a perfect autopilot solution, offering easy installation on existing outboard LS cylinders and full compatibility with the autopilot.\n\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":56098048573780,"sku":"LE-2204147","price":1037.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/furuno-capteur-a-cable-vmh-ex225-hp3500-pro-montage-tribord_le-2204147-1.jpg?v=1781305134"}],"url":"https:\/\/skysat.fr\/en\/collections\/pilot-sensors.oembed","provider":"Skysat","version":"1.0","type":"link"}