{"product_id":"garmin-livescope-xr-lvs62-sonde-sonar-live","title":"LiveScope™ XR LVS62, transducer only","description":"\u003cp\u003e\n    The Garmin LiveScope™ XR LVS62 transducer is a key component of the LiveScope XR system, designed for real-time sonar visualization on electric motors. This transducer offers advanced installation and viewing flexibility, allowing users to adapt their setup to fishing and navigation conditions.\n\u003c\/p\u003e\n\u003ch3\u003eVersatile mounting options\u003c\/h3\u003e\n\u003cp\u003e\n    The LiveScope™ XR LVS62 transducer provides three distinct mounting methods to suit various electric motor types. The \u003cstrong\u003eperspective mode mount\u003c\/strong\u003e allows installation of the transducer on the motor shaft using an extension arm, offering perspective, forward, and downward views. For installation on the motor barrel, the \u003cstrong\u003ebarrel mount\u003c\/strong\u003e is available, providing forward and downward views. Finally, the \u003cstrong\u003eshaft mount\u003c\/strong\u003e secures the transducer directly to the motor shaft, also for forward and downward views, with a lower profile than the perspective mode mount. The included brackets allow tool-free transitions between views using knobs, or a more permanent position with low-profile screws.\n\u003c\/p\u003e\n\u003ch3\u003eView modes and technical installation\u003c\/h3\u003e\n\u003cp\u003e\n    With the extension arm and perspective mode bracket, the LiveScope™ XR LVS62 transducer enables switching between three distinct sonar views: perspective, forward, and down. Each mode is verifiable via markers on the bracket and transducer to ensure correct orientation. Installing the device requires a software update on a compatible Garmin chartplotter. Special attention must be given to the transducer cable routing, using electrical tape to secure it above and below the motor’s rotating joint, and creating a service loop of at least 25 cm. To comply with FCC regulations and reduce electromagnetic interference, a ferrite bead must be installed on the transducer cable near the connector.\n\u003c\/p\u003e\n\u003ch3\u003eImportant considerations\u003c\/h3\u003e\n\u003cp\u003e\n    When planning the installation, it is critical to mount the transducer in a location where it will not be damaged during launch, retrieval, or storage operations. The sonar module (not included with this standalone transducer) must be installed in a well-ventilated area, protected from extreme temperatures and submersion, with LEDs visible and cables accessible. The use of third-party or self-fabricated brackets is not covered by warranty and may result in damage or loss of the transducer. An optional extension cable is available for additional lengths.\n\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"LVS62 depth sounder only","offer_id":55860388725076,"sku":"010-02719-10","price":1966.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0988\/3274\/4788\/files\/main_b80d1d99-8a57-4cd8-b864-124e63958e78.jpg?v=1779192662","url":"https:\/\/skysat.fr\/en\/products\/garmin-livescope-xr-lvs62-transducer","provider":"Skysat","version":"1.0","type":"link"}