Colliers JL Audio PS-SWMCP, tube 3 po - 010-13877-00 - vue 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

JL Audio

010-13877-00

JL Audio PS-SWMCP Collars, 3" Tube

PS-SWMCP-B-3.000 kit for 3-inch (76.2 mm) round tube and PS650-VeX enclosures as per the datasheet. Speakers sold separately.

Retail priceBenefit from the professional rate

166,66€

166,66€ ~~166,66€~~

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for Bahrain. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Color	Black
Compatible models	JL Audio PS650-VeX
Kit contents	Four Axia Alloys hose clamps, six M6 x 16 mm screws, two pre-installed M4 x 4 mm adjustment screws, four M6 nylon-insert locknuts, two clamp receivers, one red Loctite threadlocker, four M6 flat washers, four M6 x 45 mm screws, and one plastic strip. Mounting bases, silicone, and hardware marked with an asterisk are supplied with the speakers, not with this kit.
Product type	Speaker mounting bracket
Brand Name	JL AUDIO
Locknut Type	Nylon insert locknut
Mounting Screw Length Mm	16, 45, 4
Product Model	PS-SWMCP-B-3.000

Detailed description

The PS-SWMCP-B-3.000 fasteners correspond to a 3" (76.2 mm) round tube. The common manual covers JL Audio PS650-VeX enclosures and PS-SWMCP fasteners on round tubes. It does not prove compatibility with ETXv3 nor equivalence with all M6-VeX models.

Contents and Installation

Four Axia Alloys strap clamps, six M6 x 16 mm screws, two preinstalled M4 x 4 mm adjustment screws, four M6 nylon-insert locknuts, two clamp receivers, red Loctite thread locker, four M6 flat washers, four M6 x 45 mm screws, and one plastic strip. Mounting bases, silicone, and screws marked with an asterisk are supplied with the speakers, not with this kit.

Protect the tube with the plastic strip during positioning, support the enclosure, adjust its orientation, and follow the thread locker and tightening sequence. Rotating the speaker and its grille within the enclosure is a separate operation; no numerical amplitude is added.

Documentation

Type	Nom
	EN - Instructions d'installation et garantie limitée JL Audio - Colliers pivotants JL Audio VeX, barre 3 po

Expert opinion

« Skysat advice: compatibility and installation »

Measure the tube and confirm the enclosure model before ordering. Do not confuse the clamp kit with the parts supplied with the enclosure. Use red Loctite at the prescribed steps and support the enclosure during assembly. The manual does not provide a torque value for this kit; do not reuse a value from another family.

Payment and security

Your payment information and data are processed securely.

JL Audio PS-SWMCP Collars, 3" Tube

166,66€

166,66€ ~~166,66€~~

Frequently Asked Questions

Need help? Contact us

What are JL Audio VeX swivel clamps used for?

The PS-SWMCP mounts are used to attach JL Audio PS650-VeX enclosures to a round pole. The speakers are sold separately; the manual does not confirm compatibility with ETXv3 or equivalence with all M6-VeX speakers.

What is the tiller size compatible with these swivel clamps?

This reference is intended for a 3-inch round tube, i.e. 76.2 mm. Measure the tube before ordering; this diameter is not an overall dimension.

Is the product supplied with VeX speakers?

No. Speakers are sold separately.

Is this product compatible with speakers from other brands?

The PS-SWMCP mounts are used to install JL Audio PS650-VeX enclosures on a round tube. The speakers are sold separately; the manual does not guarantee compatibility with ETXv3 or equivalence with all M6-VeX speakers.

Is the Loctite® red thread-locking compound included with the cable ties?

The red Loctite is supplied. Follow the steps in the manual for the relevant screws, support the housing, and perform the final tightening after alignment.

How to avoid scratching the tiller when installing clamps?

The plastic strip protects the tube during collar positioning. Remove it after installation as per the manual.

How to aim the speakers after installing the clamps?

The manual describes the enclosure orientation and its locking. Rotation of the speaker and its grille within the enclosure is a separate operation. No angular amplitude figure is published here.

Is the mounting process the same for all PS-SWMCP swivel mount models?

The common manual covers PS-SWMCP mounts on round tubes and PS650-VeX enclosures; select the exact tube size.

Is the adhesive silicone for the logo cap included with the cable ties?

The manual marks the mounting bases, silicone, and enclosure screws/washers with an asterisk: these items are supplied with the enclosure, not with the clamps.

Should the mounting screws of the enclosure be tightened in a specific way?

Follow the complete sequence in the manual: protected collar positioning, receiver assembly, box support, orientation, thread-locking and final tightening. Do not substitute a procedure ETXv3.

Which components are included in the packaging of the swivel clamps?

Four Axia Alloys hose clamps, six M6 x 16 mm screws, two pre-installed M4 x 4 mm adjustment screws, four M6 nylon-insert locknuts, two clamp receivers, one Loctite red thread locker, four M6 flat washers, four M6 x 45 mm screws, and one plastic strip. Mounting bases, silicone, and screws marked with an asterisk are supplied with the speakers, not with this kit.

Are the mounting bases for speakers included with the swivel brackets?

The manual specifies the mounting bases, sealant, and enclosure screws/washers with an asterisk: these items are supplied with the enclosure, not with the clamps.

Are mounting screws for speakers supplied with these clamps?

The manual marks the mounting bases, silicone, and enclosure screws/washers with an asterisk: these items are supplied with the enclosure, not with the clamps.