36V 120Ah 6TL House Battery

Unlike traditional lithium-ion batteries (LiFePO4), this battery uses solid-state electrolyte technology. It contains no internal liquid, completely eliminating the risk of combustion, even if punctured. Additionally, it offers an exceptional energy density of approximately 100 Wh/lb.

Yes, this battery is designed for mixed use (slow discharge and starting). It delivers a continuous current of 250 A and can reach peaks of 500 A, providing an equivalent of 1000 CCA. It is fully capable of starting large heat engines while powering your service equipment.

The specific 6TL format features a narrow and tall footprint. This design is particularly suited to confined spaces on board, such as central consoles, leaning posts, or catamaran hulls where space is limited.

This battery has a lifespan exceeding 3,000 cycles with a permitted depth of discharge (DOD) of 100%. Its intelligent Battery Management System (BMS) maximizes longevity by balancing cells and protecting against abusive use.

No, this is one of the major advantages of solid-state technology. The battery allows charging and discharging down to -20 °C (-4 °F) natively, without requiring internal heating mats as is often the case with traditional lithium batteries.

The battery is fitted with M8 bolt terminals. It is critical not to tighten them by hand. Use a torque wrench to apply the recommended tightening torque of 10 to 12 Nm to ensure optimal contact and avoid damaging the terminals.

Yes, Solid State Marine batteries can be connected in series and parallel. According to the manufacturer's specifications for this model, the maximum allowed configuration is 2S2P (2 in series and 2 in parallel).

You can use a standard charger with a Lithium battery charge profile. The standard charging process requires a maximum charging voltage between 41.5 V and 42 V.

The integrated Battery Management System (BMS) provides multiple protections:

Shutdown in case of overvoltage or undervoltage.Protection against extreme temperatures (high and low).Protection against short circuits up to 1000 A.Passive cell balancing at the end of charging.

The battery features native Bluetooth connectivity. Simply download the free SSM Battery Monitor HP app (available on iOS and Android) to monitor the charge state, voltage, current, and temperature in real time from your smartphone.

Yes, this is entirely possible. When placing your order, you can select the +NMEA variant, which includes the NMEA 2000 protocol. This allows you to connect the battery directly to your boat’s network and display its data on your compatible chartplotter. Other protocols such as Victron, CAN, and RS-485 are also available as options.

Absolutely. The ABS casing of the battery has an IP67 certification, making it completely dustproof and protected against temporary immersion. It also complies with ABYC marine safety standards.

The BMS features ultra-fast short-circuit protection (up to 1000 A for 2 milliseconds). If a short circuit is detected, it immediately cuts power to the battery for safety reasons. To reset it, disconnect the battery cables, resolve the issue in your electrical circuit, then reconnect them.

Solid-state battery technology offers several major advantages for marine use compared to conventional lithium-ion batteries (LiFePO4):

Absolute safety: The absence of internal liquid eliminates any risk of combustion or fire, even in the event of accidental battery perforation.Exceptional lightness: At approximately 20 kg, it is twice as light as a standard lithium battery and up to three times lighter than an equivalent lead-acid bank.Sustained performance: It allows a 100% depth of discharge safely and offers a lifespan exceeding 3000 cycles.

Yes, this battery is fully suited to extreme weather conditions. Unlike traditional lithium batteries, which require internal heating mats to operate in cold temperatures, solid-state technology enables native operation at very low temperatures.

Its integrated intelligent battery management system (BMS) safely allows:

Charging and discharging down to -20 °C without any additional equipment. Optimal performance in high heat, with a tolerance up to 70 °C.

Monitoring your battery is very simple and can be done in two ways thanks to its connectivity:

Via Bluetooth (included): Simply download the free SSM Battery Monitor HP app to your smartphone (compatible with iOS and Android). It lets you view the charge level, voltage, and battery health parameters in real time.Via your onboard network (optional): Depending on the selected variant, the battery can integrate marine communication protocols such as NMEA 2000, CAN, RS-485, or Victron compatibility. This allows you to display energy data directly on your boat’s chartplotter or multifunction display.