Gen2 - AC Circuit Breaker Solenoid

The Gen2 AC breaker solenoid (8CH-0000-27) is a remote actuator designed for remote control and monitoring of AC breakers aboard a vessel. It is a key component of the Maretron OctoPlex G2-Series system.

This solenoid is an integral part of the Maretron OctoPlex G2-Series system, a complete solution for monitoring and controlling AC and DC electrical loads aboard vessels.

Using this solenoid with the Maretron OctoPlex G2-Series system provides several advantages:

Reduced wiring weight: It helps lighten the vessel’s electrical installation.Simplified installation: The overall system is less complex to install.Flexible placement of electrical panels: It allows positioning electrical panels in remote locations without requiring large traditional panels.Remote control and monitoring: Circuit breakers can be controlled and monitored via the NMEA 2000 network.

Yes, the Gen2 AC circuit breaker solenoid is designed to integrate seamlessly into the NMEA 2000 CAN bus network. The Maretron OctoPlex G2-Series system is also NMEA 2000® approved (category B).

This solenoid is compatible with single-pole, double-pole, and triple-pole circuit breakers, providing high flexibility for various electrical configurations within the Maretron OctoPlex G2-Series system.

As a component of the Maretron OctoPlex G2-Series system, this solenoid meets strict international standards and holds the following certifications:

CE certified. Compliant with IEC60533 (electrical and electronic installations in ships). Compliant with IEC60945 (maritime navigation and radiocommunication equipment and systems). NMEA 2000® approved (Category B). Holds Lloyd’s type approval (certificate no. 10/00021).

Yes, all AC circuit breakers in the Maretron OctoPlex G2-Series system require a remote actuator such as the 8CH-0000-27 solenoid to enable remote control and monitoring.

The Maretron OctoPlex G2-Series system uses a CAN bus NMEA 2000 network with redundant architecture. This design eliminates single points of failure, ensuring increased reliability of the entire onboard electrical system.

Yes, the AC circuit breaker solenoid (8CH-0000-27), as part of the Maretron OctoPlex G2-Series system, enables remote control and monitoring of AC circuit breakers via the NMEA 2000 network.

Yes, the Maretron OctoPlex G2-Series system, of which this solenoid is a component, is designed to be versatile. The AC Power Monitor unit of the system can be used in 110V, 220V, three-phase, and 240V European applications.

No, OctoPlex products, including this solenoid, are not ignition-protected devices. They must not be installed in areas where combustible vapors may be present.

Periodic inspection of all mounting hardware and connections is recommended to ensure proper operation of the solenoid and OctoPlex system.

No, the Maretron OctoPlex G2-Series system is designed to centralize control of AC and DC loads, providing complete management of the vessel's electrical power.

Yes, the circuit breakers controlled by this solenoid can be operated remotely via the NMEA 2000 network. The OctoPlex G2-Series system is designed to be managed through a configurable and customizable user interface, typically an 8- or 12.1-inch dedicated multifunction display (MFD).

Although the OctoPlex installation guide serves as a reference, it does not replace or modify the requirements of applicable industrial standards for wiring or other protections. It is imperative to comply with standards such as those from the American Boat and Yacht Council (ABYC), the National Electric Code (NEC), and/or the National Fire Protection Association (NFPA).

The solenoid itself is an actuator for circuit breakers. However, it integrates with the Maretron OctoPlex G2-Series system, which is compatible with the monitoring and control of common marine NMEA 2000 devices such as compasses, GPS, tank level adapters, and others.

Yes, one of the advantages of the OctoPlex G2-Series system is that it allows electrical panels to be placed in remote locations, eliminating the need for large traditional electrical panels and contributing to a cleaner installation.

As a component of the Maretron OctoPlex G2-Series system, the solenoid is part of a redundant architecture via the NMEA 2000 CAN bus network. This design eliminates single points of failure, thereby increasing the reliability and safety of the entire AC power distribution system on board.

Yes, the Maretron OctoPlex G2-Series system is compatible with software solutions such as Maretron N2KView® V3 for onboard and remote monitoring, as well as the MConnect web server, which provides an HTML5 gateway to interact with the NMEA 2000® network from computers or mobile devices.

The 8CH-0000-27 solenoid is not a standalone product. It is specifically designed as a remote actuator and a key component of the Maretron OctoPlex G2-Series system. It requires integration with this system to function, including connection to AC power distribution units and the NMEA 2000 network.