Tinned marine shore power cable 10/3 - 250 ft

This shore power cable is supplied in a single length of 250 feet, which is approximately 76.2 meters.

This cable is 10 AWG (American Wire Gauge), which indicates the cross-sectional area of its conductors.

This shore power cable has 3 separate conductors. The designation '10/3' refers to this configuration.

The conductors of this cable are made of tinned copper.

Tinned copper offers several crucial advantages in a marine environment:

It provides maximum protection against corrosion and electrolysis, extending the cable's lifespan. It ensures better durability and optimal electrical performance in the harsh conditions of saltwater.

This cable is rated for a maximum voltage of 600 volts.

The cable is rated for an ambient temperature up to 60°C (140°F). The high-quality vinyl insulation withstands temperatures of 105°C when dry and 75°C when wet.

The nominal outer diameter of the entire cable is approximately 21/32" (17 mm).

The outer jacket of the cable is high-visibility yellow, which provides enhanced safety at sea and on docks.

Yes, the outer jacket is designed to be resistant to oil, UV rays, salt water, and battery acid, ensuring durability in harsh marine environments.

The three individual conductors inside the cable are black, white, and green.

The conductors are insulated with high-quality vinyl, capable of withstanding high temperatures.

Yes, this cable meets UL 1426, US Coast Guard Charter boat (CFR Title 46), and ABYC standards, ensuring its safety and performance for marine applications.

The approximate weight of this shore power cable is 284 lbs (129 kg) per 1,000 feet.

No, this product is a bulk cable (on a spool) of 250 feet and does not include pre-installed connectors. These must be purchased and installed separately according to your installation's specific requirements.

Yes, this marine-grade cable is designed for demanding marine electrical systems and is suitable for permanent installations on boats, in compliance with ABYC and US Coast Guard standards.

Yes, this cable is specifically designed for use with standard marine shore power systems, providing reliable connectivity for your boat's electrical needs.

Although this cable is primarily designed for marine AC shore power systems, its 600-volt rating and tinned copper conductors make it technically usable for certain high-power DC applications, provided that current ratings and appropriate installation standards are respected.

Yes, Ancor products are generally covered by the manufacturer's warranty. For specific details regarding the duration and conditions of this warranty, please refer to the information provided by the manufacturer.

This shore power cable is supplied on a 250-foot (76.2-meter) reel, ready to be unspooled and cut to your installation requirements.