Contura Water Resistant 12V DC Panel - 4 Position - Contura Water Resistant 12V DC Panel - 4 Position

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 16%

Blue Sea Systems

8262-BSS

Contura waterproof 12 V DC - 4 position panel

The BLUE SEA Contura 4-position DC panel (PN 8262) is designed for 12V or 24V electrical distribution in marine environments. Resistant to spray and temporary immersion, it includes four Contura switches with LED indicators and 15A AGC fuses. This compact model, from the Contura range, is ideal for above-deck applications, but its switches are not "ignition proof", making it unsuitable for areas with flammable vapors. It comes with a sealing gasket, fuses, and a set of labels.

Retail priceBenefit from the professional rate

£106.70 GBP

£106.70 GBP ~~£128.35 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Positions	4.0
Nominal voltage	12V / 24V
Max Amperage	45.0
Type de disjoncteur	Fuses
Included Breakers	0.0
Rétroéclairé	Oui
Included Labels	60 labels
Mounting type	Flush-mounted
Panel Material	5052-H32 aluminum alloy
Dimensions (W x H x D)	133.40 x 95.30 x 69.90
Couleur de l'actionneur	Black
Style d'actionneur	Switch
Alarm output	false
Grade d'aluminium	5052-H32
Amperage	15
Connector type	AGC/MDL fuse blocks
Compatible CZone	false
Final Panel Finish	Graphite textured two-component polyurethane
Support mise à jour firmware	false
Fuse Dimensions Imperial	1-1/4 x 1/4
Fuse Dimensions Metric	1.25 x 0.25
Fuse type	AGC (fast), MDL (slow)
Housing material	Aluminum alloy
Installation type	Flush-mounted
IP rating	Waterproof
Voyant lumineux	true
Compatible MasterBus	false
Material Thickness Mm	2.54
Military standard compliance	Mil Spec C-5541C
Operating voltage range	12V - 24V DC
Couleur du panneau	Graphite
Primary Finish Treatment	Chemical treatment per Mil Spec C-5541C
Product use	DC power distribution panel for marine applications
Type de produit	Switchboard
Product type	Distribution panel
Fonction de l'interrupteur	ON-OFF

Detailed description

Designed for electrical distribution in marine environments, the BLUE SEA Contura 4-position water-resistant DC panel (PN 8262) provides reliable management of your 12V or 24V circuits. Made from 2.54 mm (0.100") 5052-H32 aluminum alloy, it features a chemical treatment compliant with military specification C-5541C and a two-component textured graphite polyurethane finish, ensuring durability against marine conditions.

Circuit Protection and Indicators

This panel integrates four Contura ON-OFF switches, each paired with a fuse holder compatible with 3.175 cm x 0.635 cm (1-1/4" x 1/4") AGC (fast) and MDL (slow) glass fuses. 15-ampere AGC fuses are provided and installed. Each switch includes an integrated LED indicator designed for a 100,000-hour lifespan (at half-life), allowing visualization of circuit status. The maximum capacity of the switches and fuse holders is 20 amperes for a 12-volt system and 15 amperes for a 24-volt system, with a cumulative maximum current of 45 amperes for the entire panel.

Water-Resistant Design and Integration

The BLUE SEA Contura 4-position panel is specifically designed to withstand water exposure typical of above-deck applications, including salt spray, rain, jet washes, and momentary immersion. Its overall dimensions are 133.40 x 95.30 mm (5-1/4" x 3-3/4") with a depth of 69.90 mm (2-3/4"). A sealing gasket and mounting screws are included for a sealed and secure installation. Unlike other panels certified as "ignition protected," this model must not be installed in explosive environments such as gasoline engine compartments or battery compartments, as its switches are not ignition-proof. PN 8262 is a more compact version than PN 8261 (8 positions), targeting installations requiring fewer circuits while maintaining the same resistance and performance standards. It is CE and IP66 certified, ensuring compliance with European health, safety, and environmental protection standards, as well as protection against dust and powerful water jets.

Documentation

Type	Nom
	EN - Instructions - Contura Water Resistant 12V DC Panel - 4 Position
	EN - Cutout Templates - Contura Water Resistant 12V DC Panel - 4 Position

Expert opinion

Pol CONIN

Digital Manager

« Analysis of the BLUE SEA Contura 4-position DC panel for marine environments »

The BLUE SEA Contura 4-position DC panel (PN 8262) is a relevant solution for adding or upgrading auxiliary electrical circuits on mid-sized vessels or tenders. Its compact design, with four switches, makes it ideal for specific applications such as controlling deck lighting, secondary bilge pumps, or essential navigation equipment on a flybridge or in an open cockpit. Its resistance to spray, rain, and jet washing, confirmed by its "water resistant" design and the inclusion of a sealing gasket, ensures reliability in outdoor conditions.

Installation is simplified by clear mounting centers and a straightforward wiring diagram. It is crucial to follow BLUE SEA’s cable sizing recommendations, particularly for the main power wire and branch circuits, to ensure minimal voltage drop and adequate protection. Special attention must be paid to its positioning: the switches on this model are not "ignition proof," so the panel must never be installed in areas prone to flammable vapor accumulation, such as gasoline engine compartments or battery rooms. For these applications, it is mandatory to use panels specifically certified as "ignition protected," often featuring circuit breakers instead of glass fuses for enhanced safety.

Compared to its 8-position counterpart (PN 8261), the 8262 offers a smaller footprint, which is an advantage in confined spaces. It stands out for its structural robustness, thanks to its aluminum alloy and polyurethane finish—essential characteristics for longevity in marine environments. It is a reliable choice for expanding DC distribution capabilities where only a few additional circuits are needed, without compromising quality, with CE and IP66 certifications confirming its robustness.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Contura waterproof 12 V DC - 4 position panel

£106.70 GBP

£106.70 GBP ~~£128.35 GBP~~

Frequently Asked Questions

Need help? Contact us

What material is the BLUE SEA Contura 4-position distribution panel made of?

The panel is made of 5052-H32 aluminum alloy with a thickness of 2.54 mm (0.100”).

What are the exact dimensions of this electrical panel?

The overall dimensions of the panel are 133.40 mm x 95.30 mm (5-1/4” x 3-3/4”). Its depth is 69.90 mm (2-3/4”).

Is the BLUE SEA Contura 4-position panel water-resistant?

Yes, this panel is specifically designed to withstand common above-deck water exposures, including salt spray, rain, jet washes, and brief immersions.

What types of fuses are used with this control panel?

The fuse holders accept AGC (fast-acting) and MDL (slow-blow) glass fuses measuring 3.175 cm x 0.635 cm (1-1/4” x 1/4”). 15-amp AGC fuses are supplied and installed.

What is the maximum current rating in amps for each switch and fuse holder?

Each switch and fuse holder has a maximum current rating of 20 amps for a 12-volt system and 15 amps for a 24-volt system.

What is the maximum cumulative current the entire panel can support?

The maximum cumulative current for the entire distribution panel is 45 amperes.

Is the panel compatible with 24-volt electrical systems?

Yes, the panel is designed to work with 12 or 24 V DC systems.

Do the panel switches have a status indicator?

Yes, each switch is fitted with an integrated LED indicator. These LEDs are rated for a lifespan of 100,000 hours (at half-life) and allow the circuit status to be monitored.

Is the panel supplied with labels to identify the circuits?

Yes, 60 basic labels are provided to help you identify and customize the different circuits of the panel.

What is the finish applied to the BLUE SEA Contura panel?

The panel features a chemical treatment compliant with military specification C-5541C and a two-component graphite textured polyurethane finish, ensuring durability against marine conditions.

What safety precautions should I take before installing the panel?

Before any installation, it is imperative to disconnect the main positive cable from all batteries and unplug the AC power cord from the boat. This eliminates the risk of short-circuit during installation and the risk of electrocution from the AC wiring.

Are there locations where this panel should not be installed?

Yes, the panel must not be installed in explosive environments, such as gasoline engine compartments or battery compartments, as the switches are not protected against ignition of vapors.

How can I ensure the panel is watertight during installation?

A sealing gasket is included and must be positioned between the panel and the mounting surface. It is essential to firmly screw the panel to ensure adequate watertightness if the front face is exposed to water.

What wire size is recommended for the main positive power feed from the panel?

The positive power feed wire should be sized for the panel’s full current rating, which is 45 amperes. In most cases, this will require at least an 8 AWG wire for a 3-meter (10-foot) circuit length between the panel and batteries in 12-volt systems, targeting a 3% voltage drop.

How to connect the negative power wire of LED indicators?

Use a 16 AWG wire to connect the LED negative power wire (usually yellow) to the DC negative bus of your system.

How to size wires for individual branch circuits?

The appropriate wire gauge for each branch circuit must be determined by calculating the maximum sustained amperage of the circuit and its length. It is recommended to target a 3% voltage drop for safety-critical items (such as navigation lights, bilge blowers, electronics) and 10% for non-critical loads (such as cabin lights or bait pumps).