Side-mounted Smart Evo control with separate display for Navy, Pod Drive and Spirit 1.0 Evo

The ePropulsion Smart Evo side-mounted control unit with its separate display is a control unit designed to manage ePropulsion Evo range electric outboard motors and pod drives. It allows precise control of propulsion and real-time monitoring of essential engine and battery data, optimizing the sailing experience.

This side mount is compatible with ePropulsion motors from the Navy, Pod Drive, and Spirit 1.0 Evo ranges. It can be configured specifically for Navy 3.0, Navy 6.0, Pod 1.0, Pod 3.0 models, and EVO series motors.

The independent 4.3-inch LED digital display shows the following real-time information:

Battery levelMotor powerSpeedDistance travelledElectricity consumption

Yes, the Smart Evo side control is designed for ambidextrous installation. You can mount it on the port or starboard side of your boat, depending on your preferences and the layout of your helm station. After installation, you must configure the side of the handle (port or starboard) via the display settings.

The Smart Evo side thruster has an IP67 protection rating. This means it is fully protected against dust and can withstand temporary immersion in water (up to 1 meter for 30 minutes).

The Smart Evo side thruster is designed to operate within a temperature range of -5°C to 55°C. For storage, the recommended temperature range is -25°C to 70°C.

The Smart Evo side mount kit packaging contains the following items:

1 Smart Side Mount Control Evo unit
1 Evo Display screen
1 communication cable
2 kill switches
M5x12 and M5x16 countersunk Phillips-head screws
M5 and M3 self-locking hex nuts
M5 flat washers
M3x12 socket-head screws
1 user manual

The throttle lever allows smooth transitions between propulsion modes:

F (Forward): Push the lever forward to engage forward propulsion. N (Neutral): The central position corresponds to no propulsion. R (Reverse): Pull the lever backward to engage reverse propulsion.

The kill switch is an essential safety component:

Before operation: Insert the kill switch before starting the engine.Normal shutdown: Remove the kill switch to power down the system.Emergency shutdown: Detach the kill switch to immediately cut power to the engine in an emergency.Restart after emergency: After an emergency shutdown, return the throttle lever to the Neutral (N) position before reattaching the kill switch to restart.

To control the system via the power button:

Power on: Press and hold the button for 1 second to activate the system. The power indicator will light up.
Power off: Press and hold the button for 2 seconds to deactivate the system. The power indicator will turn off.

Yes, in systems with dual consoles, you can transfer control by quickly pressing the power button on the inactive console twice.

To configure the motor version:

With the motor running, press and hold the 'Menu' button for 3 seconds to access the preferences settings page. Press the 'Select' button to move to the 'Version' option. Press the 'Confirm' button to enter the version settings page. Press the 'Select' button to choose the motor version you need (e.g., Navy 3.0, Navy 6.0, Pod 1.0, Pod 3.0, EVO). Press the 'Confirm' button to save the setting. The system will automatically return to the preferences settings page.

To adjust the handle side:

In operating mode, press and hold the "Menu" button to access the preferences settings page. Press the "Select" button to move to the 'Throttle' option. Press the "Confirm" button to enter the throttle adjustment page. Press the "Confirm" button to enter the handle side adjustment, then press the "Select" button to choose 'Port' or 'Starboard'. Press the "Confirm" button to save the setting. Press the "Menu" button to automatically return to the preferences settings page.

The quick-release button allows you to detach the throttle handle. It is primarily designed for sailboat regatta scenarios where quick detachment may be necessary. It is recommended to avoid detaching it during non-competitive use to minimize the risk of loss. To reinstall it, simply align the circular hole with the quick-release button in its original position and press firmly, without needing to press the quick-release button.

The side helm communicates via cable. A communication cable is included in the package to ensure the connection between the helm and the display, as well as with the engine system. The user manual provides detailed wiring instructions, making the process clear and manageable.

The Smart Evo side control offers several key functions for control and monitoring:

Engine control (forward, neutral, reverse) via the throttle lever.Real-time display of essential engine and battery data on the separate screen.Emergency stop function via the circuit breaker.System power control.Ability to switch control in dual-console systems.Customizable settings for handle side and engine version.

The technical documentation specifies compatibility with the Navy, Pod Drive, and Spirit 1.0 Evo series, as well as Navy 3.0, Navy 6.0, Pod 1.0, Pod 3.0, and EVO versions for settings. For other ePropulsion products such as the eLite, X, P eSSA, I series, or G batteries, it is recommended to check specific compatibility in their respective manuals or contact ePropulsion support.

The Smart Evo side control uses wired communication to exchange data between the remote, the separate display, and the drive system. A communication cable is included in the package to establish this connection.