Intelligent through-hull transducer 150 W 13°-24° (NMEA 2000)

The Garmin 010-00701-01 through-hull transducer is designed for fiberglass and metal hulls with a deadrise angle of 13° to 24°. Operating at 160 kHz with 150 W, it provides accurate depth (up to 274 m) and temperature data via NMEA 2000. It differs from the 0–12° version by its specific tilted element. The kit includes the transducer, a NMEA 2000 T-connector, and a 5.5 m (18 ft) pigtail cable.

Retail priceBenefit from the professional rate

£126.21 GBP

£126.21 GBP ~~£150.50 GBP~~

Shipping calculated at checkout.

Prices exclude import taxes (indicative rate: UK import VAT 20%). DAP delivery: import taxes are paid on delivery.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	Traditional depth sounder
Operating voltage	12
Fishfinder frequencies	160
Peak power	1200.0
Max power consumption	1 W
Max depth reading	274.0
Typical power consumption	0.6 W
Transducer material	Plastic
Sonar connector type	NMEA 2000
Product width	51 mm
Integrated temperature sensor	Yes
Compatible displays	NMEA 2000 compatible displays
Bus compatibility	NMEA 2000
Wired network	NMEA 2000
Wireless connectivity	No
Mounting type	Through-hull
Certifications	NMEA 2000,CE
Antifouling Paint Recommendation	Antifouling paint water-based (mandatory for saltwater installations)
Cored Hull Installation Materials	Fiberglass cloth and resin OR 51 mm cylinder, wax, adhesive tape and casting epoxy
Deadrise Angle Range Degrees	13-24
Fishing type	Sea
Diamètre de la scie cloche	51
Hull Material Compatibility	Metal, fiberglass
Hull Type Restriction	Do not install on wooden hull
Integrated Depth Sensor	Yes
Integrated speed sensor	No
Manual Reference	190-00888-10 Rev. B
Max Operating Speed Knots	25
Nmea2000 Drop Cable Included	Yes
Nmea2000 T Connector Count	1
Nmea 0183 Compatibility	No
Package contents	Intelliducer through-hull transducer (upper and lower parts), gasket and locking ring, NMEA 2000 cable, NMEA 2000 T-connector
Diamètre foret trou pilote	3
Recommended Sealant	Marine sealant (suitable for use below the waterline), 3M - Fast Cure 5200 or Boat Life - Life Seal
Release year	2010.0
Safety Warnings Included	Yes
Serial Number Location	On a label on the top of the transducer
Fishfinder RMS power	150
Support Contact Info	USA: (913) 397-8200 or (800) 800-1020, www.garmin.com/support/; Europe: +44 (0) 870.8501241 or 0808 2380000
Tools Required For Installation	Digital angle gauge or level, safety goggles and dust mask, drill and drill bits, hole saws, sandpaper, mild detergent or weak solvent (isopropyl alcohol), marine sealant, hose clamps, file (for metal hulls), fiberglass cloth and resin OR 51 mm cylinder, wax, tape, and casting epoxy (for fiberglass hulls with core)
User level	Intermediate

Detailed description

Designed for metal and fiberglass hulls, the Garmin 010-00701-01 smart through-hull transducer provides accurate depth and temperature data directly to your NMEA 2000 network. This 150 W sensor operates at a frequency of 160 kHz and offers a maximum depth of 274 meters (900 feet). Its tilted element is specifically adapted to hull drift angles from 13° to 24°, ensuring optimal readings in these configurations.

Integration and performance

The NMEA 2000 integration of this Garmin transducer simplifies connection to your existing marine electronics system, allowing digital data to be displayed on compatible GPS/chartplotter screens. Unlike NMEA 0183 models that require dedicated interfaces, NMEA 2000 connectivity offers easier installation and network scalability. This model differs from the 010-00701-00 reference by its tilt angle adapted to hulls with more pronounced drift (13°-24° vs. 0°-12°), optimizing performance for improved measurement accuracy.

Installation and compatibility

Installing the 010-00701-01 transducer requires drilling a 51 mm diameter hole in the hull. It comes with an NMEA 2000 T-connector and a 5.5-meter (18-foot) NMEA 2000 drop cable, enabling immediate integration. Its design ensures compatibility with a wide range of Garmin chartplotters and other NMEA 2000 equipment, providing a complete solution for underwater data acquisition.

Documentation

Type	Nom
	Installation instructions - Intelliducer through-hull transducer installation guide
	Technical Reference - Technical Reference for Garmin NMEA 2000 Products (EN)

Expert opinion

Pol CONIN

Digital Manager

« Garmin 150W NMEA 2000 Fishfinder: technical analysis and selection criteria »

The Garmin 010-00701-01 through-hull transducer is a reliable solution for acquiring depth and temperature data on vessels equipped with an NMEA 2000 network. Its intended use is clear: it targets fiberglass and metal hulls with a specific deadrise angle of 13° to 24°. This criterion is critical; a mismatch between hull angle and transducer tilt will compromise reading accuracy, particularly at high speeds or in rough sea conditions. For hulls with a lower deadrise angle, the 0-12° variant of the same series should be selected to ensure optimal performance.

While installation requires drilling a 51 mm hole, Garmin’s detailed documentation simplifies the process. It is essential to follow sealing instructions, especially for cored fiberglass hulls, to prevent water ingress. The NMEA 2000 connection is a major advantage, offering a true "plug and play" integration into an existing network without requiring additional complex interfaces. This enables immediate data transmission to all compatible Garmin or third-party devices on the same bus. This transducer is particularly suitable for sailboats and powerboats with hull configurations matching the specified tilt range, seeking a standalone and direct solution for essential navigation data.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security