Marine speakers Signature Series 3i for wakeboard tower (pair)

The RMS (Root Mean Square) power for the Fusion Signature Series 3i 6.5-inch marine tower speakers is 75 W.

These Fusion Signature Series 3i 6.5-inch marine tower speakers can handle a maximum power of 230 W.

The impedance of all Fusion Signature Series 3i marine tower speaker models is 4 ohms.

The frequency response range for the 6.5-inch Fusion Signature Series 3i marine tower speakers is 70 Hz to 22 kHz.

Yes, these speakers are rated IP65 for protection against dust and water ingress under normal conditions. Note that they are not designed to withstand high-pressure water jets, which could damage the product and void the warranty.

The cone of these speakers is made from CURV® material with a rubber surround, ensuring durability and audio performance.

The safe distance from a compass for Fusion Signature Series 3i 6.5-inch marine tower speakers is 310 cm (122 inches).

These speakers are designed to operate within a temperature range of 0 to 50°C (32 to 122°F).

To clean your speakers, follow these steps:

Rinse off all saltwater and salt residue with a damp cloth soaked in fresh water. Use a mild detergent to remove heavy salt buildup or stains. Do not use harsh or solvent-based cleaners, as they may damage the product and void the warranty.

For installation, you will need the following tools and materials:

Electric drill12 mm (1/2 in) drill bitsWire strippersMarine-grade tinned copper speaker cable, 16 AWG (1.3 to 1.5 mm²) or thicker (not included)Marine-grade tinned copper cable, 20 AWG (0.5 to 0.75 mm²) for LED connections (not included)3 A inline fuse for LED connectionsMounting bracket for speaker (sold separately)Solder and waterproof heat-shrink tubing or waterproof crimp connectors (optional)Marine sealant (optional)

No, the mounting brackets for the Signature Series tower speakers are sold separately. Each type of mounting bracket includes specific installation instructions.

Use 16 AWG (1.3 to 1.5 mm²) or thicker marine-grade tinned copper speaker cable to connect speakers to your stereo or amplifier. For longer runs or 2-ohm loads, 12 AWG (3 to 4 mm²) cable may be required.

You have two options for wiring the LEDs:

With a Fusion CRGBW wireless remote (recommended): Install a Fusion CRGBW wireless remote module (sold separately) to turn the LEDs on/off, change colors, and create lighting effects. Follow the instructions provided with the remote.Direct connection for a static color: If you do not install a remote, you can set a static color by connecting the black wire of the LEDs to the positive pole (+) of a 12 Vdc power source and one or more colored wires of the LEDs to the negative pole (-). A 3 A fuse must be installed near the power source for the positive LED wire.It is imperative to insulate any unused LED wires to prevent short circuits.

Yes, after installation, it is recommended to run the speakers at low to moderate volumes during the first few hours of use. This helps improve overall sound by gradually breaking in the moving components of new speakers, such as the cone, spider, and surround.

No, the logo angle adjustment function for Fusion speakers does not apply to 6.5-inch models, including this one.

Yes, it is mandatory to connect the positive wire (+) (black) of all LED speakers to a 3 A fuse located near the power source to prevent damage to the speakers or the vessel.

For Fusion Signature Series 3i 6.5-inch marine tower speakers, the recommended amplifier power (RMS, for music listening) is 30 to 90 W.

Yes, you can connect multiple speakers in parallel. For a 2-ohm load (for example, two speakers in parallel):

For a distance between the amplifier and speaker of 0 to 4 meters, use a 16 AWG cable (1.3 to 1.5 mm²). For a distance of 4 to 10.5 meters, use a 12 AWG cable (3 to 4 mm²). Ensure you use a watertight connection method.

These speakers, being True-Marine™ products, come with a 3-year limited global warranty for consumers. True-Marine™ products undergo rigorous environmental testing to exceed industry standards for marine products.