Marine speakers Signature Series 3i Sport for 6.5" wakeboard tower black 230 W with CRGBW LED (pair)

These speakers have a maximum power of 230 W.

The RMS (Root Mean Square) power of these speakers is 75 W.

The frequency response of these speakers ranges from 70 Hz to 22 kHz.

The nominal impedance of all models in this series is 4 ohms.

Yes, when properly installed, these speakers are rated IP65 for protection against dust and water ingress under normal conditions. Note that they are not designed to withstand high-pressure water jets, such as those encountered when washing your boat.

True-Marine™ products have undergone rigorous environmental testing in harsh marine conditions, exceeding industry guidelines for marine products. This certification ensures a design focused on ease of use and integration of advanced marine technologies to deliver cutting-edge entertainment.

For optimal performance when listening to music, an RMS amplifier power output of 30 to 90 W is recommended for these 6.5-inch speakers.

For installation, you will need the following tools and materials:

A power drillA 12 mm (1/2 in) drill bitWire strippersTinned marine-grade 16 AWG (1.3 to 1.5 mm²) or thicker speaker wire (not included)Tinned marine-grade 20 AWG (0.5 to 0.75 mm²) wire for LED connections (not included)A 3 A inline fuse for LED connectionsSpeaker mounting brackets (sold separately)Solder and heat-shrink tubing or waterproof crimp connectors (optional)Marine sealant (optional)

No, mounting brackets for Signature Series tower speakers are sold separately. Each type of mounting bracket includes specific installation instructions.

Speaker wire is not included. It is recommended to use marine-grade tinned copper speaker wire of 16 AWG (1.3 to 1.5 mm²) or thicker to connect speakers to your stereo system or amplifier. For most installations, 16 AWG wire is sufficient, but 12 AWG wire may be required for longer distances.

It is recommended to install a Fusion CRGBW wireless remote control module (sold separately) to turn the LEDs on and off, change colors, and create lighting effects. If you choose not to install the remote control, you can set a static color for the LEDs by connecting LED wire combinations directly to the power source.

Yes, after installation, it is recommended to run the connected speakers at low to moderate volumes for the first few hours of use. This helps improve overall sound quality by gradually breaking in the moving components of the new speakers, such as the cone, spider, and surround.

To identify the polarity of speaker wires:

The white wire corresponds to the positive (+). The white wire with a black stripe corresponds to the negative (-). It is essential to respect this polarity (positive to positive and negative to negative) when connecting to your stereo system or amplifier.

These speakers, being Fusion True-Marine™ products, are covered by a 3-year limited global warranty for consumers.

The limited warranty does not cover:

Cosmetic damage (scratches, scuffs, dents).Damage caused by an accident, misuse, improper use, water, flooding, fire, or other natural disasters or external causes.Damage caused by service performed by a provider not authorized by Garmin.Damage to a product modified without Garmin’s written approval.Damage to a product connected to power and/or data cables not supplied by Garmin, or to uncertified UL power adapters not labeled as Limited Power Source (LPS).

No, the logo angle adjustment feature for Fusion speakers does not apply to 6.5-inch models, such as this one.

The safe distance from a compass for these 6.5-inch speakers is 310 cm (122 inches).

The required supply voltage for the LEDs is between 10.8 and 16 Vdc.

Yes, it is strongly recommended to have your audio system professionally installed to ensure optimal performance.