AC Master inverter 12/1500 (230/50-60 Hz) AU/NZ outlet

The Mastervolt AC Master 12/1500 inverter delivers a continuous power output of 1500 W, whether at 25 °C or 40 °C (at a power factor of 1).

This inverter has compact dimensions of 248 x 421 x 83 mm (height x length x depth) and a weight of 4.2 kg, making installation straightforward.

The Mastervolt AC Master 12/1500 inverter is designed to operate with a 12 V input voltage from your battery.

The Mastervolt AC Master 12/1500 inverter provides an output voltage of 230 V AC with a frequency of 50/60 Hz. It generates a stable pure sine wave alternating current.

Yes, this inverter includes an automatic energy-saving system. This mode can be enabled or disabled via a DIP switch (DIP switch 4) and extends battery life by reducing consumption when no load is present.

The Mastervolt AC Master 12/1500 inverter has excellent efficiency, reaching up to 93%.

The Mastervolt AC Master 12/1500 inverter is equipped with multiple safety features to protect your equipment and the system. These include protections against:

OverheatingOverloadShort circuitsAbnormal battery voltages (too low or too high)

The Mastervolt AC Master 12/1500 inverter can operate within an ambient temperature range of -25 °C to 60 °C. However, a power reduction is to be expected above 40 °C.

Yes, the Mastervolt AC Master 12/1500 inverter can handle peak loads. It can support up to 1730 W for 1 minute and up to 2650 W for 1 second, which is useful for devices with high inrush current.

For a secure installation, the chassis ground terminal of the Mastervolt AC Master inverter must be connected directly to the central ground point of the vehicle or boat.

For the AC Master 12/1500 inverter (12 V model), the minimum recommended DC cable cross-section is 50 mm² (1/0 AWG) to ensure optimal performance and avoid voltage drops.

For the AC Master 12/1500 inverter (12 V and 24 V models), the minimum recommended AC cable cross-section is 1.00 mm² (17 AWG).

Yes, the Mastervolt AC Master 12/1500 inverter has a remote control terminal. It allows connection of a remote control panel or a remote switch for added convenience.

If the red LED is flashing slowly, this indicates an input DC voltage that is too low. Check the following points:

Is the DC input voltage too low due to voltage drop from excessively long or undersized DC cables? Shorten the DC cables or use thicker-gauge cables.Are the connections loose or corroded? Tighten the connections; burnt cables must be repaired immediately.Is the battery dead? Disconnect the load and recharge the battery.

The Mastervolt AC Master 12/1500 inverter is equipped with an AU/NZ Outlet power socket, compliant with standards used in Australia and New Zealand.

Yes, the Mastervolt AC Master 12/1500 inverter is designed for recreational and semi-professional applications, which typically include marine and onboard uses where a reliable AC power supply from a 12 V battery source is required.

No, Mastervolt declines all liability for indirect or consequential damages resulting from the use of the AC Master inverter, as stated in the product documentation.

The energy-saving mode of the Mastervolt AC Master inverter can be enabled or disabled using DIP switch 4. Set the switch to « OFF » to disable energy-saving mode and to « ON » to enable it.

For the energy-saving mode, the charge adjustment thresholds can be set. The minimum threshold is 20 VA and the maximum threshold is 110 VA.