HST-WSBL 83/200 kHz Skimmer sonde w/ Temp Sensor

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Navico

000-0106-72

Skimmer Depth Sounder HST-WSBL 83/200 kHz with Temperature Sensor

Name: Skimmer Depth Sounder HST-WSBL 83/200 kHz with Temperature Sensor
Brand: Navico
SKU: 000-0106-72
Price: 68.06 GBP
Availability: InStock

La sonde Navico HST-WSBL 83/200 kHz Skimmer est une solution de détection de profondeur et de température. Elle offre une double fréquence (83/200 kHz). Cette sonde à montage sur tableau arrière est fournie avec 6 mètres de câble et un connecteur bleu à 7 broches.

Retail priceBenefit from the professional rate

£68.06 GBP

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	Sonar traditionnel,CHIRP
Fishfinder frequencies	83/200 kHz
Operating temperature	0°C à +50°C
Max depth reading	304.0
Transducer material	Plastique
Sonar connector type	Bleu 7 broches
Cable length	6.0
Integrated temperature sensor	Oui
Compatible displays	Afficheurs Lowrance, Simrad, B&G avec connecteur bleu 7 broches
IP rating	IPX7
Bus compatibility	Propriétaire (Navico)
Wired network	Propriétaire (Navico)
Mounting type	Tableau arrière, Moteur électrique avant, Traversée de coque
Certifications	CE
Temperature measurement range	0°C à +50°C
Beam coverage angle	38° à 83 kHz, 17° à 200 kHz
CHIRP high frequency	83-200
CHIRP low frequency	83
Compatible models	Unités Lowrance, Simrad et B&G avec connecteur bleu 7 broches
Fishing type	Mer, Lac, Rivière, Traîne
Integrated speed sensor	Non
Product type	Sonde

Detailed description

The Navico HST-WSBL 83/200 kHz Skimmer depth sounder with temperature sensor is designed for reliable depth and temperature readings on vessels. It integrates a water temperature sensor for real-time data and is compatible with Lowrance, Simrad, and B&G units featuring a 7-pin blue connector.

Sonar Performance

This depth sounder operates on two frequencies: 83 kHz and 200 kHz. At 83 kHz, it provides a 38° beam width for wide fish detection. At 200 kHz, the beam is narrower (17°), offering higher definition. The HST-WSBL can reach a maximum depth of 304 meters (1000 feet) at 200 kHz.

Design and Installation

Weighing 0.11 kg (without cable) and featuring a 6-meter cable, this depth sounder has a housing. It is specifically designed for transom mounting but can also be installed on an electric motor or used for through-hull mounting on fiberglass hulls. The ideal mounting location is in undisturbed water flow, avoiding chines or flaps. Operating temperature ranges from 0°C to +50°C, and storage temperature from -30°C to +70°C. The recommended maximum speed for transom mounting is 60 knots.

Documentation

Type	Nom
	EN - Guide d’installation - HST-WSBL 83/200 kHz Skimmer sonde w/ Temp Sensor
	FR - Guide d’installation - HST-WSBL 83/200 kHz Skimmer sonde w/ Temp Sensor
	FR - Guide d’installation - HST-WSBL 83/200 kHz Skimmer sonde w/ Temp Sensor
	EN - Guide d’installation - HST-WSBL 83/200 kHz Skimmer sonde w/ Temp Sensor

Payment and security

Your payment information and data are processed securely.

Skimmer Depth Sounder HST-WSBL 83/200 kHz with Temperature Sensor

£68.06 GBP

Frequently Asked Questions

Need help? Contact us

What are the main functions of the NAVICO HST-WSBL depth sounder?

The NAVICO HST-WSBL transducer is designed to provide depth and water temperature readings. It includes a temperature sensor for real-time data.

Which frequencies does this transducer use for its measurements?

This transducer operates on two frequencies: 83 kHz and 200 kHz. It is classified as a CHIRP mid/high-frequency transducer.

What is the length of the HST-WSBL depth sounder transducer cable?

The HST-WSBL transducer is supplied with a 6 m (approx. 19.5 ft) cable.

What is the weight of the NAVICO HST-WSBL transducer without its cable?

The weight of the HST-WSBL transducer without its cable is 0.11 kg (approximately 0.24 lbs).

What is the maximum depth this depth sounder can reach?

The HST-WSBL transducer can reach a maximum depth of 304 meters (1000 feet) when operating at 200 kHz.

What is the operating temperature range of the transducer?

The transducer is designed to operate within a temperature range of 0°C to +50°C (32°F to +122°F).

What is the recommended storage temperature range for the transducer?

The transducer can be stored within a temperature range of -30°C to +70°C (-22°F to +158°F).

What is the maximum boat speed for accurate readings with a transom-mounted installation?

For mounting on the transom, the transducer can provide accurate readings up to a speed of 60 knots (about 70 mph).

What are the mounting options available for this depth sounder?

This transducer can be installed in several ways:

On the transom (rear panel)On an electric trolling motorBy shoot-thru-hull scanning through fiberglass hulls

Where should I mount the transducer for optimal performance?

The ideal mounting location for the transducer is in undisturbed water flow to ensure accurate and reliable readings.

Which locations should be avoided when installing the depth sounder?

It is not recommended to install the transducer behind a chine or near flaps, or in any area where water flow is disturbed.

Can I install this transducer by sweeping it through the hull?

Yes, this transducer can be installed for through-hull mounting, but only on fiberglass hulls. It cannot scan through wooden hulls.

What are the recommended hole sizes for mounting?

Recommended pilot hole sizes for screws with a 10 mm diameter depend on the material:

For soft materials (e.g., plywood): Ø 3.7–4.0 mm (5/32")
For rigid materials (e.g., fiberglass, acrylic, hardwood): Ø 4.1–4.7 mm (3/16")

Should a sealing product be used when installing the depth sounder?

Yes, it is imperative to apply a high-quality marine sealant/adhesive, suitable for use above or below the waterline, on the fairlead holes.

Is it possible to install the transducer on an electric motor?

Yes, the HST-WSBL transducer is compatible with mounting on an electric trolling motor.

Which fishfinder brands is this transducer compatible with?

This transducer is compatible with units from Lowrance, Simrad, and B&G.

What type of connector does the depth sounder use?

The HST-WSBL transducer is equipped with a 7-pin blue connector.

Is the transducer compatible with all Lowrance, Simrad and B&G models?

The transducer is compatible with Lowrance, Simrad, and B&G units specifically equipped with a 7-pin blue connector.

Can I use this transducer for a through-hull installation on a wooden hull?

No, through-hull scanning transducers (shoot-thru-hull) cannot function effectively through wooden hulls. This mounting method is only suitable for fiberglass hulls.

Which devices is the HST-WSBL 83/200 kHz transducer compatible with?

The Navico HST-WSBL 83/200 kHz transducer is designed to be compatible with Lowrance, Simrad, and B&G branded units. For optimal compatibility, your device must be equipped with a 7-pin blue connector.

This transducer provides real-time depth and temperature readings, operating at 83 kHz and 200 kHz frequencies.