AC Circuit Breaker Gen2 - Single-Pole 230 VAC, 5 A, Medium Trip Delay

The Raymarine Gen2 AC circuit breaker is a single-pole electrical protection device designed for 230 VAC alternating current circuits with a rated current of 5 A. It provides circuit protection, remote control, and circuit status monitoring.

This circuit breaker is specifically rated for a nominal current of 5 A.

This circuit breaker is designed to operate on 230 VAC alternating current circuits.

This circuit breaker has a medium trip delay, making it suitable for various circuit protection applications.

This is a single-pole circuit breaker, meaning it protects a single phase of the AC circuit.

Key features of this circuit breaker include:

AC circuit protection. Remote ON/OFF switching of circuits. Monitoring of circuit status via NMEA 2000 network. Design allowing easy field replacement.

This circuit breaker is designed for integration within the Maretron OctoPlex G2-Series system.

Yes, this circuit breaker is NMEA 2000 certified, ensuring compatibility and interoperability within modern marine networks. It allows control and monitoring via the NMEA 2000 network.

Yes, this circuit breaker complies with international standards for European applications at 220V and 240V, although this specific model is rated for 230V.

This circuit breaker holds several important certifications:

NMEA 2000® Approved: Certified, Category B, ensuring compatibility with modern marine networks. CE Approved: Compliant with European standards. IEC60533: For electrical and electronic installations on ships. IEC60945: For maritime navigation and radio communication equipment. Lloyd’s Type Approved: Certified under Test Specification #1, ENV2 Certificate No. 10/00021.

Yes, thanks to its integration with the OctoPlex system and the NMEA 2000 network, it enables ON/OFF activation and remote monitoring of circuit status.

Yes, its design allows for field replacement, which greatly simplifies maintenance and installation.

The circuit breaker must be installed in an AC power distribution architecture, specifically within the Maretron OctoPlex G2-Series system. It is important to note that OctoPlex products are not protected against ignition and must not be installed in areas with combustible fumes.

Yes, this circuit breaker is specifically designed for marine environments. It complies with international standards such as IEC60533 and IEC60945, and holds Lloyd’s Type Approved certification, attesting to its compliance with strict vessel requirements.

The Lloyd’s Type Approved certification confirms that the circuit breaker has been tested and approved according to stringent specifications (Test Specification #1, ENV2 Certificate No. 10/00021). This ensures its reliability, safety, and compliance with classification society requirements for use on vessels.

Yes, in addition to protection, this circuit breaker enables monitoring of circuit status when integrated into the OctoPlex system via the NMEA 2000 network. This provides complete visibility on the operation of your equipment.

Yes, the Maretron OctoPlex G2-Series is a digital power distribution system that provides full control of AC and DC loads aboard the vessel, using an NMEA 2000 network for communication and control.

While this specific model is for 230 VAC, the OctoPlex G2-Series system, into which it integrates, is stated as usable in European applications at 220V and 240V, as well as 110V and three-phase. However, this particular circuit breaker is specifically rated for 230V.

Yes, periodic inspection of all mounting hardware and connections is strongly recommended to ensure proper operation and system safety.

No, OctoPlex products, including this circuit breaker, are not ignition-protected devices. They must not be installed in areas where combustible gases could be present.