Cable adaptateur Raymarine A80485 Axiom DV 9 broches vers 8 broches

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 11%

Raymarine

A80485

Adapter cable (8-pin to 9-pin) for CP370 transducer on AXIOM DV

The Raymarine A80485 adapter cable is an essential accessory for connecting a CHIRP DownVision™ CP370 transducer (8-pin) to an AXIOM DV multifunction display (9-pin). It ensures compatibility between your existing equipment and Raymarine AXIOM displays, which are known for their LightHouse 4 system.

This cable is supplied alone, without additional accessories. It is specifically designed for integrating CP370 transducers with AXIOM DV MFDs, providing a simple and functional upgrade solution.

Retail priceBenefit from the professional rate

£50.94 GBP

£50.94 GBP ~~£57.46 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	8-pin to 9-pin
Cable type	Depth sounder cable
Compatible network	Raymarine Sonar CHIRP DownVision
Wired network	Raymarine Sonar
Operating voltage	12V DC
Certifications	CE
Product type	Adapter cable
Compatible models	Raymarine CP370 transducers, Raymarine AXIOM DV multifunction displays

Detailed description

The Raymarine A80485 adapter cable is designed to ensure compatibility between existing CHIRP DownVision™ CP370 transducers and Raymarine AXIOM DV multifunction displays (MFDs). This solution allows users to upgrade their navigation system without replacing their CP370 transducer, representing significant cost savings and simplified integration.

Integration and compatibility

This adapter cable converts an 8-pin transducer connector (typical of CP370 transducers) to a 9-pin connector, required by AXIOM DV series MFDs. This feature is essential for systems where the CP370 transducer, known for its DownVision capabilities, is already installed and operational. While older systems such as Raymarine A-Series, C-Series, or E-Series Classic/Widescreen sometimes used these transducers, the A80485 cable enables their connection to AXIOM MFDs, which offer advanced LightHouse 4 features, improved user interface, and superior processing power. It serves as a key element in transitioning to AXIOM platforms without losing investment in existing equipment.

Technical specifications and installation

The A80485 cable is a direct adapter, eliminating the need for complex configurations. It is specifically designed by Raymarine to ensure optimal signal integrity between the CP370 transducer and the AXIOM DV display, preserving DownVision image quality. Unlike generic solutions, using an original Raymarine cable ensures reliability and performance compliant with the manufacturer’s specifications. Installation is "plug-and-play", requiring only the connection of corresponding pins from the transducer and MFD, with no specialized tools or additional software configuration needed for physical transducer recognition.

Documentation

Type	Nom
	FR - Manuel d'utilisation - Câble d'adaptation (8 broches vers 9 broches) sonde CP370 sur AXIOM DV

Expert opinion

Pol CONIN

Digital Manager

« CP370 to AXIOM DV compatibility upgrade: an essential Raymarine solution »

The Raymarine A80485 adapter cable is a key component for owners looking to modernize their navigation system without compromising their initial investment in transducers. It is specifically designed for users equipped with a CP370 CHIRP DownVision™ transducer, often installed with previous-generation MFDs, who plan to upgrade to an AXIOM DV multifunction display. The practical value of this adapter is straightforward: it allows reusing a high-performance and costly transducer with a newer platform, avoiding the purchase of a new transducer compatible with AXIOM.

In terms of installation, this cable is a prime example of simplicity. It connects directly between the CP370 transducer and the rear of the AXIOM DV MFD, requiring no advanced technical skills. This "plug-and-play" approach is particularly valuable during a refit or upgrade, where wiring complexity is often a barrier. There is no software configuration or complex setup required; the adapter handles the physical conversion from 8 to 9-pin connectors. It is critical to note that this adapter is dedicated to the CP370 transducer and AXIOM DV displays; it is not designed for other Raymarine transducer models (e.g., RealVision) or other MFD ranges.

The differentiation of this product lies in its specificity. It is not a generic adapter, but a Raymarine solution optimized to ensure data transmission without loss of quality for DownVision imaging. For an expert, the reliability of the connection and signal integrity are paramount, and a brand-specific adapter significantly reduces the risk of interference or performance degradation. In short, the A80485 is the logical and economical choice to maximize the lifespan of your CP370 transducer when transitioning to the AXIOM DV platform.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Adapter cable (8-pin to 9-pin) for CP370 transducer on AXIOM DV

£50.94 GBP

£50.94 GBP ~~£57.46 GBP~~

Frequently Asked Questions

Need help? Contact us

Which transducers are compatible with the A80485 adapter cable?

This cable is specifically designed to be used with the Raymarine CP370 CHIRP DownVision™ transducer. It provides the necessary adaptation for this transducer to operate with AXIOM DV displays.

Which Raymarine multifunction displays (MFD) is this cable compatible with?

The A80485 adapter cable is compatible with Raymarine AXIOM DV series multifunction displays (MFD). It is essential for connecting a CP370 transducer to these MFD, which require a 9-pin connector.

Is the installation of this adapter cable complicated?

No, installing the Raymarine A80485 cable is plug-and-play. Simply connect the corresponding pins of the CP370 transducer and the AXIOM DV display. No complex configuration, specialized tools, or additional software settings are required for operation.

Does this cable affect the signal quality of my DownVision transducer?

No, the A80485 cable is an original Raymarine product specifically designed to maintain optimal signal integrity. Using it ensures that the DownVision image quality of your CP370 transducer is preserved when connected to your AXIOM DV display, guaranteeing reliable performance in line with the manufacturer's specifications.

Can I use this cable with other Raymarine transducers than the CP370?

No, the Raymarine A80485 adapter cable is specifically designed for the Raymarine CP370 CHIRP DownVision™ transducer. It is not compatible with other Raymarine transducer models, as the pin configuration and electrical signals are tailored specifically for the CP370.

Does this cable allow connecting older system transducers to AXIOM MFDs?

Yes, specifically when the older transducer is a Raymarine CP370 CHIRP DownVision™. This cable was designed to enable users with an existing CP370 transducer (which could be used with older Raymarine systems such as the A, C, or E Classic/Widescreen series) to transition to modern AXIOM DV multifunction displays without replacing their existing transducer.