Cable Y adaptateur Raymarine A80487 Axiom DV 9 broches vers 9 et 8 broches

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 11%

Raymarine

A80487

Adapter cable (9 & 7-pin Y-cable to 9-pin) DownVision & CP370 AXIOM DV transducer

Designed for Raymarine systems, the Y A80487 adapter cable allows simultaneous connection of a DownVision transducer (9-pin) and a CP370 sounder module (7-pin) to an Axiom DV multifunction display via a single 9-pin input. This accessory provides simplified integration and combined use of these sonar technologies on your Raymarine system. The product is supplied alone.

Retail priceBenefit from the professional rate

£86.10 GBP

£86.10 GBP ~~£97.24 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	Raymarine 9-pin, Raymarine 7-pin
Cable type	Y adapter cable
Compatible network	Raymarine Sonar (DownVision, ClearPulse)
Wired network	Raymarine Sonar
Operating voltage	12V/24V DC
Operating temperature	-25°C to +55°C
Storage temperature	-30°C to +70°C
IP rating	IPX6/IPX7
Certifications	CE
Product type	Wiring accessory
Compatible models	Raymarine Axiom DV displays; Raymarine DownVision transducers (CPT-60, CPT-100); Raymarine CP370 sounder module

Detailed description

The Raymarine A80487 adapter cable is designed to simplify the integration of multiple transducer modules on Axiom DV multifunction displays. Specifically developed for DownVision sonar systems and the CP370 sounder module, it allows connecting these two sources to a single 9-pin input on the Axiom DV display. This solution optimizes installation by avoiding the use of multiple ports or complex adapters.

Integration of DownVision sonar and CP370 module

This Y-cable enables Axiom DV display users to simultaneously benefit from DownVision imaging capabilities (using transducers such as the CPT-60 or CPT-100) and the performance of the ClearPulse CP370 sounder module. While DownVision transducers provide detailed images of underwater structures and fish, the CP370 delivers powerful traditional sonar with enhanced penetration capability, ideal for deep detection. The A80487 ensures smooth and simultaneous data transmission for both technologies.

Technical positioning and compatibility

Unlike simple extension or conversion cables, the A80487 cable is a Y-adapter that merges two specific data streams (9 and 7 pins) into a single 9-pin connection compatible with Axiom DV displays. This specificity distinguishes it from generic cables and positions it as a key component for Raymarine installations requiring dual sonar functionality on an Axiom DV. It is essential for fully utilizing the capabilities of DownVision systems and CP370 without compromising signal quality or port compatibility.

Documentation

Type	Nom
	FR - Manuel d'utilisation - Câble d'adaptation (9 & 7 broches Câble Y vers 9 broches) sonde Downvision & CP370 AXIOM DV
	FR - Notice d'installation - Câble d'adaptation (9 & 7 broches Câble Y vers 9 broches) sonde Downvision & CP370 AXIOM DV
	EN - Notice d'installation - Câble d'adaptation (9 & 7 broches Câble Y vers 9 broches) sonde Downvision & CP370 AXIOM DV
	EN - Mounting template - Adapter cable (9 & 7-pin Y-cable to 9-pin) Downvision & CP370 AXIOM DV

Expert opinion

Pol CONIN

Digital Manager

« Optimized integration of DownVision and CP370 transducers on Axiom DV »

Raymarine's A80487 adapter cable is a critical component for boaters looking to maximize the sonar capabilities of their Axiom DV display. It addresses the common issue of integrating multiple transducer technologies on an MFD with a limited number of input ports. Instead of choosing between DownVision imaging and the power of the traditional CP370 fishfinder, this Y-cable allows both to be used simultaneously on a single 9-pin port.

In terms of installation, this cable significantly simplifies the process by consolidating two separate connections (a 9-pin for DownVision and a 7-pin for the CP370) into one. This reduces wiring clutter behind the display and minimizes the risk of connection errors. It is particularly relevant for vessels where space is constrained and every MFD port is valuable. The A80487 ensures electrical and protocol compatibility, guaranteeing that data from each fishfinder is correctly interpreted by the Axiom DV unit.

It is critical to note that this cable is a highly specific solution: it is designed for Raymarine DownVision systems (CPT-60/CPT-100) and the CP370 module with Axiom DV displays. It is not a universal adapter and will not be compatible with other transducer configurations or non-DV Axiom displays or those from other brands. Its use is therefore targeted at those who own or plan to install these specific components within the Raymarine ecosystem and seek a clean, functional integration of their underwater detection capabilities.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Adapter cable (9 & 7-pin Y-cable to 9-pin) DownVision & CP370 AXIOM DV transducer

£86.10 GBP

£86.10 GBP ~~£97.24 GBP~~

Frequently Asked Questions

Need help? Contact us

To which Raymarine multifunction displays is this A80487 adapter cable intended?

This Raymarine A80487 adapter cable is specifically designed for use with the Axiom DV series of multifunction displays.

Which types of sonar transducers or modules can be connected simultaneously with this cable?

The A80487 cable allows simultaneous connection of a DownVision transducer (such as CPT-60 or CPT-100 models) and a ClearPulse CP370 sonar module to your Axiom DV display.

What is the primary function of the Raymarine A80487 adapter cable?

The primary function of this cable is to integrate two different sonar sources (a DownVision transducer and a CP370 sounder module) into a single 9-pin input on your Axiom DV multifunction display. It is a Y-cable that consolidates these two connections.

Is it possible to use DownVision and the CP370 module features simultaneously with this cable?

Yes, this cable is specifically designed for Axiom DV display users to benefit from DownVision imaging and ClearPulse CP370 sounder module performance simultaneously. It ensures smooth and simultaneous data transmission for both technologies.

Is this cable compatible with other Raymarine fishfinder modules besides the CP370?

The A80487 cable is specifically designed for integrating DownVision transducers and the ClearPulse CP370 fishfinder module with Axiom DV displays. It is not listed as compatible with other Raymarine fishfinder modules.

What are the benefits of using this Y-adapter cable?

Using this Y-cable optimizes installation by avoiding the use of multiple ports or complex adapters on your Axiom DV display. It allows full exploitation of DownVision and CP370 systems simultaneously without compromising signal quality or port compatibility.