Cyclone ta Quantum 25M

The Raymarine A80659 cable is 25 meters long. This length is suitable for various onboard installations, allowing flexibility in the positioning of the radar and the VCM100 voltage converter module.

Yes, like all Raymarine signal cables, the A80659 cable is properly shielded. This shielding is critical to prevent electromagnetic interference and ensure signal integrity, thus guaranteeing reliable and accurate radar performance.

Yes, as a Raymarine product, the A80659 cable is specifically designed and manufactured to withstand the harsh conditions of marine environments. It is built for optimal durability and reliability against moisture, salt, and temperature variations.

Yes, the Raymarine A80659 cable is a plug-and-play cable and is supplied with the necessary connectors preinstalled at each end. This greatly simplifies installation between the radar antenna and the VCM100 module, with no complex cable terminations required.

Yes, radar cables for Cyclone and Quantum systems are available in various lengths to suit different installation configurations. Model A80659 is specifically the 25-metre version. For other lengths, please refer to the Raymarine product range.

The Raymarine A80659 cable is compatible with Raymarine radar systems in the Cyclone and Quantum series. It is designed to operate optimally with these radars, ensuring seamless integration into your navigation network.

The A80659 cable connects the radar to the VCM100 module, which in turn connects to multifunction displays (MFD). Cyclone and Quantum radars, and by extension this cable, are compatible with Raymarine MFDs in the Axiom, Axiom+, Axiom Pro, and Axiom XL series, provided they run LightHouse software version 3.9 or later.

Yes, the A80659 cable is specifically designed to connect to the VCM100 voltage converter module (part number E70648). The VCM100 is a required component for all Raymarine Cyclone and Cyclone Pro radar installations, serving as the interface between the radar cable and the vessel's network.

No, the Raymarine A80659 cable is a proprietary component designed for the Raymarine ecosystem. It is not compatible with radars or navigation systems from other brands due to its specific connectors and signal requirements.

Yes, cable A80659 transmits the data required for advanced features of Cyclone and Quantum radars, such as Doppler radar and ARPA target tracking. However, for these features to be fully operational, a compatible multifunction display (MFD) and appropriate data sources for heading, speed, and vessel position are also required.

Cable A80659 connects directly on one end to the Raymarine Cyclone or Quantum radar socket, and on the other end to the VCM100 voltage converter module. The VCM100 then acts as an interface for connection to the RayNet network of your multifunction display (MFD).

Yes, to ensure optimal performance and prevent damage, it is recommended to:

Avoid sharp bends in the cable.Keep the cable away from heat sources.Do not route the cable in bundles with other equipment cables that may carry high current or voltage.Provide adequate strain relief for all cables.These precautions help maintain signal integrity and electromagnetic compliance (EMC) of the system.

Installing the A80659 cable itself typically does not require special tools, as it comes with pre-installed connectors. However, the full radar system installation (mounting the pedestal, the VCM100, and routing cables) may require basic tools such as screwdrivers, drills, and marine-grade fasteners.

Yes, it is important to ensure that all required ferrite chokes are correctly installed with the radar system. These ferrites help suppress electromagnetic noise and maintain the system's EMC compliance, thereby contributing to radar signal clarity.

Extending Raymarine radar cables beyond their standard length is generally not recommended. For installations requiring greater range, it is preferable to use a cable of the appropriate length from the Raymarine range to ensure signal integrity and optimal radar performance.

To ensure signal integrity, it is essential to follow Raymarine’s installation guidelines:

Use the appropriate cable shielding.Respect the minimum bend radii to avoid damaging the cable.Avoid routing the cable near sources of electrical interference or high-voltage cables.Properly install ferrite chokes if required.These measures are critical for reliable data transmission.

The Raymarine A80659 cable is covered by Raymarine's standard warranty policy. To find specific warranty details, including duration and applicable conditions, consult Raymarine's official warranty documentation or visit their website.