XS Sport 7.7" 240 W Speakers (pair)

The Fusion XS Sports 7.7" marine loudspeaker box contains:

2 marine loudspeakers 12 Phillips stainless steel mounting screws (4.2 mm x 25.4 mm) 1 mounting template Speaker grilles

These Fusion XS Sports 7.7" marine speakers have a maximum power output of 240 W.

These speakers have a diameter of 7.7 inches (19.5 cm).

True-Marine™ products undergo rigorous environmental testing in harsh marine conditions to exceed industry guidelines. They are designed for ease of use and incorporate advanced marine technologies to deliver cutting-edge entertainment experiences.

For installation, you will need the following tools:

Electric drillBit (size suitable for the surface material)Universal saw or knife to cut the surface materialPhillips screwdriverWire strippersTinned marine-grade 16 AWG (1.3 to 1.5 mm²) copper speaker wireTinned marine-grade 20 AWG (0.5 mm²) copper wire for LED connections (if your model is equipped with LEDs)6.3 mm and 4.8 mm female blade connectors (recommended)4 mm male and female bullet connectors for LED wires (recommended, if your model is equipped with LEDs)Crimping toolMarine sealant (optional)

The required cutout diameter for installing these speakers is 162 mm (6 3/8 inches).

You must use 16 AWG (1.3 to 1.5 mm²) speaker wire to connect the speakers to your stereo system. Speaker wires are terminated with male blade connectors. It is recommended to use female blade connectors (not included) for optimal connection. The white wire is positive (+) and uses a 6.3 mm connector. The white wire with a black stripe is negative (-) and uses a 4.8 mm connector.

Yes, the front of the speaker is protected against water ingress, but the rear, including connected components and wires, is not waterproof and must be protected from moisture. If you mount the speaker in an area exposed to weather or water, it must be installed on a vertical surface. If mounted outside the boat, it must be well above the waterline. Exposure to water and damage to the rear of the speaker voids the warranty.

Yes, if your speaker model is equipped with LEDs and you choose not to install a controller, you can set a static color by connecting LED wire combinations to ground. The black wire of the LED cable connects to positive (+), and the colored wires (red, green, blue) connect to ground, individually or in combination, to achieve different colors (e.g., yellow for combined red and green).

If your speaker model is equipped with LEDs, you must install a 500 mA inline fast fuse on the positive wire, on the power source side of the LED cable, for each speaker. This fuse must be in a marine-rated fuse holder.

Use the template provided in the product box. If you must print your own, ensure the paper and printer are large enough. Select "None" for page scaling and check "Automatic rotation and centering." Verify that the paper size exceeds the template before printing.

Before starting installation, disconnect the vessel's power supply to prevent serious injury or equipment damage. It is also recommended to wear safety glasses, hearing protection, and a dust mask when drilling, cutting, or sanding.

Yes, 12 Phillips mounting screws in stainless steel, 4.2 mm x 25.4 mm (size 8 x 1 inch) are included with the pair of speakers.

These Fusion XS Sports 7.7" marine speakers are sold in pairs.

For LED connections, use tinned marine-grade copper wire 20 AWG (0.5 mm²).

Yes, it is recommended to install an LED lighting controller module with these speakers to turn LEDs on and off, change colors, and create lighting effects if your model is equipped with LEDs.

All True-Marine™ products are covered by Fusion’s three-year limited worldwide consumer warranty.

Exposure to water and damage to the rear of the speaker void the warranty. This includes situations where speakers are installed in an enclosure, especially if exposed to washing. Additionally, failure to protect terminals and connections from grounding or short-circuiting may damage the audio system and void the warranty.

No, you must not apply grease or lubricant on the screws when securing the speakers to the mounting surface. Grease or other lubricants can damage the speaker.

The Fusion XS 7.7" marine speaker box contains the following items:

2 speakers12 Phillips stainless steel mounting screws (4.2 mm x 25.4 mm for 7.7" models)1 mounting templateSpeaker grillesTo install, you will need the following tools and materials:

A power drill and a drill bit suitable for the surface materialA saw or utility knife for cutting the surfaceA Phillips screwdriverWire strippersTinned marine-grade 16 AWG (1.3 to 1.5 mm²) speaker wireTinned marine-grade 20 AWG (0.5 mm²) copper wire for LED connections (if your model includes LEDs)6.3 mm and 4.8 mm female spade connectors (recommended)4 mm male and female bullet connectors for LED wires (recommended, for LED models only)A crimping toolMarine sealant (optional)