easyID fuse kit

BLUE SEA's easyID fuses stand out with their built-in LED technology. Unlike standard ATC fuses, a light-emitting diode (LED) automatically illuminates when the fuse blows, providing an immediate visual indication of the fault without requiring a manual test.

You will know an easyID fuse has blown because its light-emitting diode (LED) will illuminate. This quick visual indication eliminates the need to test each fuse individually.

The BLUE SEA 5290-BSS kit contains ATC (Automotive Type C) fuses, also known as blade fuses.

Each easyID fuse in this kit has an interrupting rating of 1,000A (amperes).

The easyID fuses are designed to operate with a maximum voltage of 32V DC.

Yes, the BLUE SEA 5290-BSS kit is a complete assortment of 30 fuses and includes a fuse puller to make replacement easier.

The kit contains a total of 30 fuses, distributed as follows:

3 × 3A fuses
3 × 5A fuses
3 × 7.5A fuses
3 × 10A fuses
6 × 15A fuses
3 × 20A fuses
3 × 25A fuses
3 × 30A fuses
3 × 40A fuses

Yes, the connector blades of the easyID fuses are tinned, which gives them increased resistance to corrosion, an essential advantage in a marine environment.

The easyID fuses are color-coded by amp rating, allowing quick identification and easy replacement with the correct fuse rating.

Yes, the easyID fuse kit BLUE SEA 5290-BSS is specifically designed to simplify maintenance of marine electrical circuits, providing rapid and precise fault diagnosis onboard.

Yes, easyID fuses are fast-acting blade fuses, meaning they react quickly in case of overload to protect the circuit.

Yes, thanks to their maximum operating voltage of 32V DC, the easyID fuses are compatible with most 12V and 24V onboard electrical systems.

Yes, these fuses are complementary to existing fuse blocks. They can be used with standard ATC fuse blocks, including models such as ST-Blade fuse blocks or BLUE SEA SafetyHub.

Yes, the easyID fuse kit is an ideal replacement for standard ATC fuses, while also offering the additional benefit of the integrated LED indicator.

To install an easyID fuse, simply insert it into the appropriate slot of your fuse block. Ensure the rating (ampere rating) of the new fuse matches that of the replaced fuse for adequate circuit protection.

To remove a faulty fuse, use the fuse extractor provided in the kit. This tool is designed to grip and remove blade fuses easily without damaging the fuse block or surrounding components.

The only specific tool required for replacement is the fuse extractor included in the kit, which makes removing blade fuses easier.

No, you do not need to test the easyID fuses after a failure. The integrated LED technology means the diode lights up automatically when the fuse blows, providing immediate visual confirmation.

To choose the correct amperage, it is crucial to always replace a fuse with a fuse of the same rating (amperage) as the original. The easyID fuses are color-coded to make this identification easier.

Yes, with its varied selection of 30 fuses of different amperages (from 3A to 40A) and the inclusion of an extractor, this kit provides a complete solution for protecting many electronic devices and auxiliary circuits on board.