ePropulsion eLite 500 W electric outboard motor, 378 Wh integrated battery, standard shaft 28-40 cm

The eLite 500 W electric outboard motor provides a continuous rated power of 500 W. It also features a Sport mode that allows for a maximum power output of 750 W for occasional acceleration.

The eLite 500 W motor is equipped with an integrated lithium-ion battery with a capacity of 378 Wh (25.2 V and 15 Ah).

In ePropulsion tests on an 8-foot aluminium dinghy (117 kg total) with one person in calm water, measured results were 45 minutes at 500 W and 7.5 km/h, or 1 hour 30 minutes at 250 W and 6 km/h. These are test results, not guaranteed kayak runtime; load, wind, current and battery state change actual performance.

The full charge time for the integrated battery is 4 to 5 hours with the supplied AC charger.

The eLite 500 W motor weighs 6.7 kg without the mounting bracket (clamp bracket). With the bracket, its total weight is 7.9 kg.

The dimensions of the eLite 500 W motor without the mounting bracket are 297 mm (length) x 75 mm (width) x 890 mm (height).

Yes, the eLite 500 W motor has two power modes:

Standard mode, with a maximum output power of 500 W. Sport mode, which allows reaching a maximum power of 750 W for occasional acceleration needs. You can switch between these modes by pressing the power button twice when the motor is on.

The eLite 500 W motor is designed to operate within a temperature range of -5 °C to 55 °C.

The motor is equipped with an integrated display that provides important information. When the motor is powered on, a single press of the power button toggles the main display between motor input power (0-750 W) and battery level (%). The battery level graph remains visible in both states.

The nominal voltage of the battery integrated into the eLite 500 W motor is 25.2 Vdc.

Yes, the eLite 500 W motor is designed to be easily portable and storable. It features a foldable tiller, a quick-release mounting system, and an integrated carry handle. A carry bag is also included in the package.

Installation is done in two main steps:

Mounting the clamp bracket on the transom of your vessel.Installing the main motor on this bracket. The bracket features a quick-release function to simplify mounting and removal.It is recommended to check the proper functioning of the clamp bracket before installation.

Yes, the eLite 500 W motor shaft length is adjustable. The adjustment range is from 282.5 mm to 401 mm, measured from the top of the propeller to the transom.

The motor’s trim angle can be adjusted using the supplied trim pin. This allows you to optimize the performance and handling of your vessel based on the conditions.

The eLite 500 W motor allows adjustment of steering friction. This feature helps maintain stable steering and reduces steering effort, providing better control of the vessel.

The eLite 500 W motor is ideally designed for small boats, kayaks, tenders, and dinghies. Its power and portability make it a quiet and eco-friendly propulsion solution for these applications.

ePropulsion may refuse a warranty claim if the product has been used in contradiction with the instructions and recommendations specified in the user manual.

If the product is used in a manner that contradicts the written instructions in the user manual, ePropulsion reserves the right to refuse any warranty claim.

The eLite 500 W motor package includes the following items:

Main outboard motorA mounting bracket (clamp bracket)AC chargerCarry bag for the motorTwo circuit breakers with lanyardsHex keyTrim pinSteering lock pinUser manualQuick start guide