FT Technologies FT016 - 1.5m Cable for FT602

The FT016 cable is a 1,5 m connection solution for FT602-D-SM wind sensors, featuring 12 shielded conductors. It supports RS485, RS422, CANBus and UART interfaces, suitable for installations in harsh environments. The unterminated end allows for flexible integration.

Retail priceBenefit from the professional rate

178,97€

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for Kuwait. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Number of conductors	12.0
Shielding	Shielded
Current type	DC
Cable type	Shielded multi-conductor cable
Cable length	1.5
Compatible network	RS485, RS422, CANBus, UART
Installation location	Harsh environments, outdoor
Cable application	Sensor connection
Operating temperature	-20°C to +85°C
Connector type	12-pin Bulgin PX0410/12S/6065 connector
Compatible Sensor	FT602-SM
Manufacturer Reference	FT016
Product type	Cable

Detailed description

The FT016 cable from FT Technologies is designed for FT602-D-SM wind sensor installations, including wind measurement systems in harsh environments and outdoor industrial monitoring. This 1,5-meter operating cable integrates 12 shielded conductors, providing robust and reliable connectivity for various communication interfaces.

Detailed Technical Specifications

Characteristic	Detail
Product Name	FT602 1.5 m Operating Cable
Connector Type (A side)	12-pin (Bulgin PX0410/12S/6065)
Cable Type	12 shielded conductors
Communication Interfaces	RS485, RS422, CANBus, UART
Outer Diameter	6,0 to 6,5 mm
Temperature Range	-20°C to +85°C
Cable Length	1500 mm (±250 mm)
End B	Unterminated, stripped by 10 mm (±5 mm)
Quality Compliance	Electrical tests (open/short circuit), crimping and connector compliant with IPC/WHMA-A-620 Class 3

Electrical Interface and Pinout

The pinout of the FT016 cable is detailed to facilitate integration with the FT602 sensor, supporting power, data ground, and multiple communication protocols.

Pin	Function	FT016 Wire Color
1	5-26VDC	RED
2	0V	BLACK
3	DATA GROUND	GREY
4	RS422 TX DATA A -	YELLOW
5	RS422 TX DATA B +	GREEN
6	RS485/RS422 RX DATA B +	RED-BLUE
7	RS485/RS422 RX DATA A -	VIOLET
8	UART RX	WHITE
9	UART TX	PINK-GREY
10	N/C (not connected)	BROWN
11	CAN-LOW	BLUE
12	CAN-HIGH	PINK

Documentation

Type	Nom
	/ FT017 / FT018 - FT602 cables - 9001819 (EN)

Expert opinion

Pol CONIN

Digital Manager

« Integration of FT016 cable for FT602 sensors »

The FT016 cable is an essential component for integrating FT602-D-SM wind sensors. Its 1,5-meter length makes it specifically suited for installations where the sensor is positioned in the immediate vicinity of data processing equipment or a local junction box.

With its 12 shielded conductors, the FT016 offers remarkable interfacing flexibility, supporting RS485, RS422, CANBus, and UART. This versatility is a major asset for installers dealing with varied management systems. The unterminated end of the cable (stripped over 10 mm) allows for precise customization of the connection, whether to a terminal block, a connector specific to the host system, or an interface box. It is imperative to refer to the detailed pinout provided to ensure correct connection of functions (power supply, data ground, communication signals) to avoid any malfunction or damage to the sensor.

During installation, particular attention must be paid to the quality of the connection of the unterminated end, as this is often the most vulnerable point of an installation.